+ View PDF List - Glenn Research Center - NASA

Download PDF
14 downloads 1920 Views 75KB Size Report
Comment
Barrett, C. A.: A High Temperature Cyclic Oxidation Data Base for Selected Materi - als Tested at NASA Glenn ... Fabric-Reinforced PMR-15 Composites - Data. .... Chen, J.; Sung, P. K.; Tewari, S. N.; Poirier, D. R.; and de Groh, H. C., III: Direc-.
Materials Division Publications & Patents

2003

John H. Glenn Research Center at Lewis Field Brook Park, Ohio

1. Bansal, N. P.: Celsian Formation in Fiber-Reinforced Barium Aluminosilicate GlassCeramic Matrix Composites. Materials Science and Engineering A342 [1-2] 23-27 (2003). 2. Bansal, N. P.: SiC Fiber-Reinforced Celsian Composites. NASA/TM—2003-212555, Aug. 2003. 3. Bansal, N. P. and Choi, S. R.: Processing of Alumina-Toughened Zirconia Composites. NASA/TM—2003-212451, May 2003. 4. Bansal, N. P. and Zhu, D.: Thermal Conductivity of Alumina-Toughened Zirconia Composites. NASA/TM—2003-212896, Dec. 2003. 5. Bansal, N. P.; Singh, J. P.; Kriven, W. T.; and Schneider, H. (eds.): Advances in Ceramic-Matrix Composites IX. Ceramic Transactions, vol. 153, The American Ceramic Society, Westerville, Ohio (2003), p. 352. 6. Choi, S. R. and Bansal, N. P.: Strength, Fracture Toughness, and Slow Crack Growth of Zirconia/Alumina Composites at Elevated Temperature. NASA/TM—2003212108, Feb. 2003. 7. Choi, S. R. and Bansal, N. P.: Alumina-Reinforced Zirconia Composites. NASA/ TM—2003-212701 (2003). 8. Choi, S. R. and Bansal, N. P.: High Temperature Flexure Strength, Fracture Toughness and Fatigue of Zirconia/Alumina Composites. Presented at 27th Annual International Conference on Advanced Ceramics and Composites, Cocoa Beach, Fla., Jan. 2631, 2003; Ceram. Eng. Sci. Proc. 24 [3] 273-279 (2003). 9. Choi, S. R.; Bansal, N. P.; and Gyekenyesi, J. P.: Dependency of Shear Strength on Test Rate in SiC/BSAS Ceramic Matrix Composite at Elevated Temperature. NASA/ TM—2003-212182, April 2003. 10. Choi, S. R.; Bansal, N. P.; and Gyekenyesi, J. P.: Rate Dependency of Shear Strength in SiCf/BSAS Composite at Elevated Temperature. Presented at 27th Annual International Conference on Advanced Ceramics and Composites, Cocoa Beach, Fla., Jan. 26-31, 2003. Ceram. Eng. Sci. Proc., 24 [4] 435-441 (2003). 11. Singh, J. P. and Bansal, N. P. (eds.): Innovative Processing and Synthesis of Ceramics, Glasses and Composites VII. Ceramic Transactions, vol. 154, The American Ceramic Society, Westerville, Ohio (2003), p. 340. 12. Barrett, C. A.: A High Temperature Cyclic Oxidation Data Base for Selected Materials Tested at NASA Glenn Research Center. NASA/TM—2003-212546, Sept. 2003.

1

13. Abdul-Aziz, A. A.; Ghosn, L. J.; Baaklini, G. Y.; and Bhatt, R. T.: A Combined NDT/ Finite Element Technique to Study the Effects of Matrix Porosity on the Behavior of Ceramic Matrix Composites. Material Evaluation 61 [11] 1217-1221, 2003. 14. Abdul-Aziz, A.; Baaklini, G. Y.; and Bhatt, R. T.: Nondestructive Testing of Ceramic Matrix Composites Coupled with Finite Element Analyses. Material Evaluation, 63, [3], 413-417, 2003. 15. Abdul-Aziz, A.; Bhatt, R. T.; and Baaklini, G. Y.: Thermal Barrier Coating and Cooling Hole Size Effects on the Thermal-Mechanical Response of Cooled Silicon Nitride Plate. Ceram. Eng. Sci. Proc. 24 (3), 317. 16. Bhatt, R. T.; McCue, T. R.; and DiCarlo, J. A.: Thermal Stability of Melt Infiltrated SiC/SiC Composites. Ceram. Eng. Sci. Proc. 24 (3) 295, 2003. 17. Choi, S. R.; Pereira, J. M.; Janosik, L. A.; and Bhatt, R. T.: Foreign Object Damage of Two Gas-Turbine Grade Silicon Nitrides in a Thin Disk Configuration. Proceedings of ASME Turbo Expo 2003, GT2003-38544, 2003. 18. Bowles, K. J.; Papadopoulos, D. S.; Scheiman, D. A.; Inghram, L. L.; McCorkle, L. S.; and Klans, O. V.: A Limited Comparison of the Thermal Durability of Polyimide Candidate Matrix Polymers with PMR-15. NASA/TM—2003-211878, May 2003. 19. Bowles, K. J.; Tsuji, L.; Kamvouris, J.; and Roberts, G.: Long-Term Isothermal Aging Effects on Weight Loss, Compression Properties, and Dimensions of T650-35 Fabric-Reinforced PMR-15 Composites - Data. NASA/TM—2003-211870, Jan. 2003. 20. Bowman, R.: Verification of Heater Head Brazing Procedures for the Stirling Radioisotope Generator. NASA/TM—2003-212117, Feb. 2003. 21. Bowman, R.: Oxidation of a Type 316L Stainless Steel Stirling Converter Regenerator. NASA/TM—2003-212118, Feb. 2003. 22. Bowman, R. R.: Examination of Stirling Technology Company’s RG-55 Hermetic Closure Weldments. NASA/TM—2003-212324, June 2003. 23. Bowman, R.; Ritzert, F.; and Freedman, M.: Evaluation of Candidate Materials for a High-Temperature Stirling Convertor Heater Head. NASA/TM—2003-212734, Dec. 2003. 24. Bozzolo, G. and Farias, D., Guest Editors: Applied Surface Science. Proceedings of Applied Surface Modeling: Experiment, Theory and Simulations, August 21-23, 2002, vol. 219, nos. 1-2, pp. 1-198, Oct. 15, 2003. 25. Bozzolo, G. and Noebe, R. D.: Analysis of Surface and Bulk Behavior in Ni-Pd Alloys. Acta Materialia 51 (2003) 4395-4409.

2

26. Bozzolo, G.; Garces, J. E.; and Demarco, G.: Atomistic Modeling of Au Deposition on a Cu Substrate. Surface Science 532/535 (2003) 41-46. 27. Bozzolo, G.; Garces, J. E.; Noebe, R. D.; and Farias, D.: Atomistic Modelling of Nanostructures via the Bozzolo-Ferrante-Smith Quantum Approximate Method. Nanotechnology 14 (2003) 939-945. 28. Bozzolo, G.; Garces, J.; Noebe, R. D.; Abel, P.; and Mosca, H.: Atomistic Modeling of Surface and Bulk Properties of Cu, Pd and the Cu-Pd System. Progress in Surface Science 73 (2003) 79-116. 29. Bozzolo, G.; Noebe, R. D.; Khalil, J.; and Morse, J.: Atomistic Analysis of Surface Segregation in Ni-Pd Alloys. Applied Surface Science 219 (2003) 149-157. 30. Demarco, G.; Garces, J.; and Bozzolo, G.: Atomistic Modeling of the Pt/Cu(100) Surface Alloy. Surface Science 526 (2003) 309-322. 31. Farias, D; Niño, M. A.; de Miguel, J. J.; Miranda, R.; and Bozzolo, G.: Experiment and Modeling of Co and Fe Superlattices Grown on Cu (111). Proceedings of the 11th International Symposium on Nanostructures, Ioffe Inst. Publ. (2003) p. 307. 32. Farias, D.; Niño, M. A.; de Miguel, J. J.; Miranda, R.; Morse, J.; and Bozzolo, G.: Growth of Co and Fe on Cu(111): Experiment and BFS Based Calculations. Applied Surface Science 219 (2003) 80-87. 33. Garces, J.; Bozzolo, G.; and Marino, A.: Theoretical Description of the Deposition of Al on the UMo Solid Solution. Applied Surface Science 219 (2003) 47-55. 34. Gargano, P.; Mosca, H. O.; Bozzolo, G.; and Noebe, R.: Atomistic Modeling of RuAl and (RuNi)Al Alloys. Scripta Materialia 48 (2003) 695-700. 35. Calomino, A. M. and Verrilli, M. J.: Specimen Scale Effects on the Stress-Oxidation Behavior of a Carbon Fiber Reinforced Silicon Carbide Matrix Composite. Ceramic Engineering & Science Proceedings, vol. 24, issue 4, 2003, pp. 289-294. 36. Sullivan, R. M.; Calomino, A. M.; Hurwitz, F. I.; and Koenig, J. R.: A Model for the Oxidation of C/SiC Composite Structures. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 37. Campbell, S.; Johnston, J. C.; Inghram, L.; McCorkle, L.; and Silverman, E.: Analysis of the Barrier Properties of Polyimide Silicate Nanocomposites. 48th International SAMPE Symposium, 2003, pp. 1124-1131. 38. Bowman, C. L.; Chuang, C. H.; and Ellis, J. R.: Mechanical Characterization and Rapid Heating Response of 2-D and 3-D Polyimide-Matrix Composites for Reusable Launch Vehicles. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 3

39. Chuang, K. C.; Bowman, C. L.; Tsotsis, T. K.; and Arendt, C. P.: 6F-Polyimides with Phenylethynyl Endcap for 315-371 °C Applications. High Performance Polymers 15(4) 459 (2003). 40. MacDonald, F. D.; Stickler, P. B.; Warren, R. C.; and Chuang, K. C.: Low Cost Structural Fabrication that Resists Catastrophic Failure under Rapid Thermal Loading. United States Patent No. 6,450,450 BI, Jan. 2003. 41. Tsotsis, T. K.; Kollmansberger, R.; Arendt, C.; and Chuang, K. C.: Temperature Resin Systems for Liquid Molding. 23rd High Temple Workshop, Feb. 10-13, Jacksonville, Fla., CC-1-13 (2003). 42. Chen, J.; Sung, P. K.; Tewari, S. N.; Poirier, D. R.; and de Groh, H. C., III: Directional Solidification and Convection in Small Diameter Crucibles. Mat. Sci. and Eng. A., vol. 357, no. 1-2, 2003, pp. 397-405. 43. Chen, J.; Tewari, S. N.; Magadi, G.; and deGroh, H. C., III: Effect of Crucible Diameter on Convection, Macrosegregation and Dendrite Morphology during Directional Solidification of Pb- 2.2wt.pct. Sb. Met. Trans. A, vol. 34A, no. 12, pp. 2985-2990, 2003. 44. Li, B. Q.; Shu, Y.; Li, K.; and de Groh, H. C., III: Fluid Flow and Solidification under Combined Action of Magnetic Fields and Microgravity. TMS 2003 Annual Meeting, Session on Materials Processing in Electrical and Magnetic Fields. 45. Rerko, R. S.; de Groh, H. C., III; and Beckermann, C.: Effect of Melt Convection and Solid Transport on Macrosegregation and Grain Structure in Equiaxed Al-Cu Alloys. Materials Science and Engineering A347 (2003) 186-197. 46. Tin, P.; de Groh, H. C., III; and Kassemi, M.: Surface Tension and Viscosity of Succinonitrile-Acetone Alloys Using Surface Light Scattering Spectrometer. 15th Symposium on Thermophysical Properties, June 2003, Boulder, Col. 47. Tin, P.; Kassemi, M.; de Groh, H. C, III: Interfacial Surface Energy of SCN and SCN-Acetone Alloys at Various Temperatures Using Surface Light Scattering Spectrometer. Microgravity Transport Processes in Fluid, Thermal, Biological and Materials Sci. III, Sept. 2003, Paper No. 102. 48. DiCarlo, J. A.: Advances in SiC/SiC Materials and Processes for Aerospace Applications. Proceedings of the AeroMat 2003 Conference, June 2003, Dayton, Ohio. 49. DiCarlo, J. A.: SiC/SiC Process-Property Optimization under NASA UEET. Proceedings of the 27th Annual Conference on Ceramics, Metal & Carbon Composites, Materials and Structures, Jan. 2003, Cape Canaveral, Fla. 50. DiCarlo, J. A.: Advanced SiC/SiC Composites for Applications to 2400 °F and Above. Proceedings of the National Space & Missile Materials Symposium, 2002, Colorado Springs, Col. 4

51. DiCarlo, J. A.: Ceramic Matrix Composites: Applications, Processes, and Properties. Tutorial, Proceedings of the National Space & Missile Materials Symposium, 2002, Colorado Springs, Col. 52. DiCarlo, J. A. and Yun, H. M.: Creep of Ceramic Fibers: Mechanisms, Models, and Composite Implications. Creep Deformation: Fundamentals and Applications, eds., R. S. Mishra, J. C. Earthman, and S. V. Raj, The Minerals, Metals, and Materials Society, Warrendale, Pa., 2002, pp. 195-208. 53. DiCarlo, J. A. and Yun, H. M.: Modeling the Thermostructural Capability of Continuous Fiber-Reinforced Ceramic Composites. J. Engineering for Gas Turbines and Power, 204 [7] (2002) 465-470. 54. DiCarlo, J. A. and Yun, H. M.: New High-Performance SiC Fiber for Ceramic Composites. NASA Glenn Research and Technology 2001, NASA/TM—2002-211333, pp. 8-9. 55. DiCarlo, J. A.; Bhatt, R. T.; and McCue, T. R.: Modeling the Thermostructural Stability of Melt Infiltrated SiC/SiC Composites. Cer. Eng. Sci. Proc., 24 (2003), 465-470. 56. DiCarlo, J. A.; Yun, H. M.; Morscher, G. N.; and Bhatt, R. T.: CMC Material Development. Proceedings of Annual Technology Forum of the Ultra-Efficient Engine Technology (UEET) Program, Oct. 2002. 57. DiCarlo, J. A.; Yun, H. M.; Morscher, G. N.; and Bhatt, R. T.: SiC/SiC Development and Scale-Up. Proceedings of Annual Technology Forum of the Ultra-Efficient Engine Technology (UEET) Program, Oct. 2003. 58. DiCarlo, J. A.; Yun, H. M.; Morscher, G. N.; and Bhatt, R. T.: Progress in SiC/SiC Composite Development for Gas Turbine Hot-Section Components under NASA EPM and UEET Programs. Paper GT-2002-30461, Proceedings of the 2002 ASME Turbo Expo Land, Sea, and Air, Amsterdam, The Netherlands, June 3-6, 2002. 59. DiCarlo, J.; Yun, H. M.; Morscher, G.; Bhatt, R.; and Hurst, J.: Progress in SiC/SiC Material Development under NASA UEET. Proceedings of the 26th Annual Conference on Ceramics, Metal & Carbon Composites, Materials and Structures, Jan. 2002, Cape Canaveral, Fla. 60. Draper, S. L.; Nathal, M. V.; Nesbitt, J. A.; Ritzert, F. J.; Bowman, R. R.; Lerch, B. A.; and Locci, I. E.: Advanced Metallic Materials for Turbine Based Combined Cycle Propulsion Systems. Proceedings of JANNAF Meeting, Dec. 1-3, 2003, Colorado Springs, Col. 61. Dynys, F. W.: Ceramic Spheres Derived from Cation Exchange Beads. Ceramic Engineering and Science Proceedings, vol. 24, issue 3, 2003, pp. 147-152, W. M. Kriven and H. Lin, editors, 27th International Cocoa Beach Conference on Advanced Ceramics and Composites: A. 5

62. Allison, S. W.; Goedeke, S. M.; Beshears, D. L.; Cates, M. R.; Hollerman, W. A.; Womack, N. P.; Bencic, T. J.; Mercer, C. R.; and Eldridge, J. I.: Use of Phosphor Coatings for High Temperature Aerospace Applications. Proceedings of the 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Huntsville, Ala., AIAA-2003-4585, July 20-23, 2003. 63. Eldridge, J. I.; Bencic, T. J.; Allison, S. W; and Beshears, D. L.: Depth-Selective Diagnostics of Thermal Barrier Coatings Incorporating Thermographic Phosphors. Proceedings of the 49th International Instrumentation Symposium, May 4-8, 2003, Orlando, Fla., ISA vol. 443 (CD). 64. Eldridge, J. I.; Spuckler, C. M.; Nesbitt, J. A.; and Street, K. W.: Health Monitoring of Thermal Barrier Coatings by Mid-Infrared Reflectance. Ceram. Eng. Sci. Proc., vol. 24, no. 3, pp. 511-516 (2003). 65. Hunter, G. W.; Bencic, T. J.; Wernet, M. P.; Fralick, G. C.; Eldridge, J. I.; Farmer, S.; Sayir, A.; Mercer, C.; and Oplaski, A. B.; Allison, S.; and Beshears, D.: Development and Application of Information Rich Test Instrumentation. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 66. Martinez Fernandez, J.; Farmer, S.; and Sayir, A.: High Temperature Creep of Directionally Solidified Al2O3/Er3Al5O12 Fibers. Acta Mater., vol. 51 [6] 1705-1720 (2003). 67. Fox, D. S.; Opila, E. J.; Nguyen, Q. N.; Humphrey, D. L.; and Lewton, S. M.: Paralinear Oxidation of Silicon Nitride in a Water-Vapor/Oxygen Environment. HighTemperature Water Vapor Effects, J. Am. Ceram. Soc. 86 [8] 1256-61 (2003). 68. Freedman, M.; Lang, J.; Singh, M.; and Petko, J.: CMC Insertable Turbine Blades for NGLT Applications. Proceedings of the 2003 National Space & Missile Materials Symposium, June 23-27, 2003, San Diego, Calif. 69. Gabb, T. P.; Gayda, J.; Telesman, J.; Kantzos, P. T.; and Konkel, W. A.: Realistic Subscale Evaluations of the Mechanical Properties of Advanced Disk Superalloys. NASA/TM—2003-212086, Jan. 2003. 70. Gayda, J. and Furrer, D.: Dual-Micro Heat Treat: Dual-Microstructure Rotating Turbine Disks for Aircraft Engines Have Become a Reality, and a Cost-Effective Method to Produce Such Disks Has Been Developed and Demonstrated. Advanced Materials & Processes, July 2003. 71. Gayda, J. and Gabb, T.: Mechanical Properties of a Superalloy Disk with a Dual Grain Structure. NASA/TM—2003-212181, March 2003. 72. Gayda, J.; Gabb, T. P.; and Kantzos, P. T.: Heat Treatment Devices and Method of Operation Thereof to Produce Dual Microstructure Superalloy Disks. United States Patent No. US 6,660,110 B1, Dec. 9, 2003.

6

73. Gayda, J.; Kantzos, P.; and Miller, J.: Quench Crack Behavior of Nickel-Base Disk Superalloys. Practical Failure Analysis, vol. 3 (1) February 2003. 74. Halbig, M. C.; Kiser, J. D.; and DiCarlo, J. A.: Ceramic Matrix Composites for Space Transportation Applications - Evaluation of C/SiC and SiC/SiC in Oxidizing Environments. Proceedings of the RLV/SOV Airframe Technology Review, Hot Structures Session, NASA Langley Research Center, Hampton, Va., Nov. 19-22, 2002. 75. Halbig, M. C.; Opila, E. J.; Robinson, R. C.; and Verrilli, M. J.: Environmental Durability of Ceramic Matrix Composites for Aerospace Applications. Proceedings of the National Space & Missile Materials Symposium, June 23-27, 2003, San Diego, Calif. 76. Cosgriff, L. M.; Lerch, B. A.; Hebsur, M. G.; Baaklini, G. Y.; and Ghosn, L. J.: Ultrasonic Spectroscopy of Stainless Steel Sandwich Panels. Proceedings of the 35th International SAMPE Technical Conference, Dayton, Ohio, 2003. 77. Hebsur, M. G.; Noebe, R. D.; and Revilock, D. M.: Impact Resistance of Lightweight Hybrid Structures for Gas Turbine Engine Fan Containment Applications. J. of Materials Engineering and Performance (2003) 12:470-479. 78. Vander Wal, R. L.; Tomasek, A. J.; Street, K.; Thompson, W. K.; and Hull, D. R.: Carbon Nanostructure Examined by Lattice Fringe Analysis of High Resolution Transmission Electron Microscopy Images. NASA/TM—2003-212214, May 2003. 79. Hurwitz, F. I. and Shinavski, R. J.: Alternative Interphase Coatings for Improved Durability in SiC/SiC Composites. Ceram. Eng. Sci. Proc. 24 (4) 231-237 (2003). 80. Hurwitz, F. I.; Calomino, A. M.; and Eldridge, J. I.: Variations in Fiber Morphology of Aerospace-Grade Carbon Fiber with Heat Treatment. National Space and Missile Materials Symposium, June 22-27, 2003, San Diego, Calif. 81. Hurwitz, F. I.; Calomino, A. M.; and Sullivan, R. M.: Development of C/SiC Composites with Commingled C and SiC Fibers. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 82. Hurwitz, F. I.; Calomino, A. M.; and Sullivan, R. M.: Integrated CMC/Insulating Cove/PMC Panels for Hot Structure. Proceedings of 27th Annual Conference on Composites, Materials and Structures, Jan. 26-30, 2003, Cape Canaveral, Fla. 83. Hurwitz, F. I.; Steffier, W. S.; Tengen, G. A.; and Shinavski, R. J.: Stress-Rupture Life and Fracture Behavior of an Inhibited C/SiC Composite. National Space and Missile Materials Symposium, June 22-27, 2003, San Diego, Calif.

7

84. Jacobson, N. S.; Fox, D. S.; Smialek, J. L.; Opila, E. J.; Tortorelli, P. F.; More, K. L.; Nickel, K. G.; Hirata, T.; Yoshida, M.; and Yuri, I.: Corrosion Issues for Ceramics in Gas Turbines. Ceramic Gas Turbine Component Development and Characterization, eds., M. van Roode, M. K. Ferber, and D. W. Richerson, ASME Press, New York 2003. 85. Jaskowiak, M. H.; Dickens, K. W.; and Lawrence, T. W.: Light-Weight CMC Heat Exchanger Panels for Combined Cycle Propulsion Systems. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 86. Kiser, J. D.; Yun, H. M.; Bhatt, R.; Morscher, G.; DiCarlo, J.; and Petko, J.: Development of Sylramic-iBN SiC Fiber Reinforced CVI SiC/SiC CMCs for NGLT RLV High Temperature Applications. Proceedings of the 2003 National Space and Missile Materials Symposium, June 23-27, 2003, San Diego, Calif. 87. Gokoglu, S. and Kuczmarski, M. A.: Suppression of Buoyancy in Gaseous Media at High Temperatures. NASA/TM—2003-212695, Nov. 2003. 88. Lang, J.; Kiser, D.; and Petko, J.: Evaluation of Ceramic Matrix Composite Gas Permeability and Its Impact on Environmental Durability. Proceedings of the 2003 National Space & Missile Materials Symposium, June 23-27, 2003, San Diego, Calif. 89. Lee, K. N.: Development of Advanced Environmental Barrier Coatings in the NASA UEET Program. 27th Annual Conference on Ceramics, Metal & Carbon Composites, Materials and Structures, Cape Canaveral, Fla., Jan. 2003. 90. Lee, K. N.; Fox, D. S.; Eldridge, J. I.; Zhu, D.; Bansal, N. P.; and Miller, R. A.: Advanced Environmental Barrier Coatings Developed for SiC/SiC Composite Vanes. Research & Technology 2002, NASA/TM—2003-21190, pp. 36-37 (2003). 91. Lee, K. N.; Fox, D. S.; Eldridge, J. I.; Zhu, D.; Robinson, R. C.; Bansal, N. P.; and Miller, R. A.: Upper Temperature Limit of Environmental Barrier Coatings Based on Mullite and BSAS. High-Temperature Water Vapor Effects, J. Am. Ceram. Soc. 86 [8] 1299-306 (2003). 92. Lee, K.; Fox, D.; Zhu, D.; Robinson, C.; Bansal, N.; and Miller, R.: Development of Advanced Environmental Barrier Coatings in NASA UEET Program. Proceedings of the 27th Annual Conference on Ceramics, Metal & Carbon Composites, Materials and Structures, Restricted Sessions, Cape Canaveral/Cocoa Beach, Fla., Jan. 27-30, 2003. ZAI-Amelex, Arlington, Va. 93. Ramachandra, C.; Lee, K. N., and Tewari, S. N.: Durability of TBCs with a Surface Environmental Barrier Layer under Thermal Cycling in Air and in Molten Salt. Surface and Coatings Technology, 172 150-157 (2003). 94. Wang, H. and Lee, K. N.: Coated Article and Method of Making. United States Patent Publication No. 2003/0003329 A1 (2003).

8

95. Bertino, M. F.; Hund, J. F.; Sosa, J.; Zhang, G.; Sotiriou-Leventis, C.; Leventis, N.; Tokuhiro, A. T.; and Terry, J.: High Resolution Patterning of Silica Aerogels. Journal of Non-Crystalline Solids 333 (2004) 108-110. 96. Hund, J. F.; Bertino, M. F.; Zhang, G.; Sotiriou-Leventis, C.; Leventis, N.; Tokuhiro, A. T.; and Farmer, J.: Formation and Entrapment of Noble Metal Clusters in Silica Aerogel Monoliths by g-Radiolysis. J. Phys. Chem. B 2003, 107, 465-469. 97. Leventis, N.; Oh, W. S.; Gao, X.; and Rawashdeh, A-M M.: Nonadditive Voltammetric Currents from Two Redox-Active Substances and Electronanalytical Implications. Analytical Chemistry, August 18, 2003. 98. Leventis, N.; Zhang, G.; Rawashdeh, A-M. M.; and Sotiriou-Leventis, C.: Electrochemical Reduction of 4-Benzoyl-N-(4-substituted benzyl)pyridinium Cations: Substitution Effects and Linear Free Energy Relationships. Electrochimica Acta 48 (2003) 2799-2806. 99. Yang, J.; Oh, W. S.; Elder, I. A.; Leventis, N.; and Sotiriou-Leventis, C.: Coupling of 3,8-Dibromo-1,10-phenanthroline with 3,5-Diethynylheptyloxybenzene: A Suzuki/Miyaura Versus A Sonogashira Perspective. Synthetic Communications, vol. 33, no. 19, pp. 3317-3325, 2003. Also NASA/TM—2003-212485, Sept. 2003. 100. Zhang, G.; Rawashdeh, A.-M. M.; Sotiriou-Leventis, C.; Leventis, N.: Isocyanate Cross-Linked Silica: Structurally Strong Aerogels. Polymer Preprints 2003, 44 (1) 35-36. 101. Levine, S. R. and Opila, E. J.: Tantalum Addition to Zirconium Diboride for Improved Oxidation Resistance. NASA/TM—2003-212483, July 2003. 102. Levine, S. R. and Singh, M.: UHTC Composite for Leading Edges. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 103. Levine, S. R.; Calomino, A. M.; Verrilli, M. J.; Thomas, D. J.; Halbig, M. C.; Opila, E. J.; and Ellis, J. R.: Ceramic Matrix Composites (CMC) Life Prediction Development — 2003. Prepared for the 27th Annual Conference on Composites, Materials and Structures, Jan. 27-31, 2003, Cape Canaveral, Fla. Also NASA/TM—2003-212493, Aug. 2003. 104. Levine, S. R.; Singh, M.; and Opila, E. J.: Robust UHTC for Passive Sharp Leading Edge Applications. Prepared for the 27th Annual Conference on Composites, Materials, and Structures, Jan. 27-31, 2003, Cape Canaveral, Fla. 105. Levine, S. R.; Verrilli, M. J.; Halbig, M. C.; Calomino, A. M.; and Thomas, D. J.: C/SiC Life Prediction for Propulsion Applications. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col.

9

106. Zhou, S.; Chen, L.-Q.; MacKay, R. A.; and Liu, Z-K: Evaluation of the Thermodynamic Properties and Phase Equilibria of the Ordered Gamma’ and Disordered Gamma Phases in the Ni-Al-Ta System. Proceedings of MRS 2002 Fall Meeting, Symposium DD, Solid-State Chemistry of Inorganic Materials IV, eds., M. A. Alario-Franco, M. Greenblatt, G. Rohrer, and M. S. Whittingham, vol. 755, DD11.25. 107. Meador, M. A. B. and Frimer, A. A.: NMR Guided Design of Endcaps with Improved Oxidation Resistance. Polymer Preprints 2003, 44(1), 240. 108. Meador, M. A. B.; Cubon, V. A.; Scheiman, D. A.; and Bennett, W. R.: Effect of Branching on Rod-Coil Block Polyimides as Membrane Materials for Lithium Polymer Batteries. Chem. Mater. 2003, 15, 3018-3025. 109. Criss, J. M., Jr.; Meador, M. A.; Chuang, K. C.; Connell, J. W.; Smith, J. G., Jr.; Hergenrother, P. M.; and Mintz, E. A.: New State-of-the-Art High Temperature Transfer Modable Resins and Their Use in Composites. International SAMPE Symposium, 48, 1063 (2003). 110. Meador, M. A.: Diels-Alder Trapping of Photochemically Generated o-xylylenolsApplication in the Synthesis of Novel Organic Molecules and Polymers. The Spectrum, vol. 16, issue 2, Summer 2003, pp. 22-29. 111. Meador, M. A.: Polyimides by Photochemical Cyclopolymerization. United States Patent No.: US 6,593,389 B1, July 15, 2003. 112. Meador, M. A.: Nanotechnology Derived Materials and Devices for Aerospace Power and Propulsion. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 113. Meador, M. A.; Chuang, C. H.; and Campbell, S. G.: High Temperature Polymeric Materials for Space Transportation Propulsion Applications. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 114. Anderson, L. M. and Misra, A. K.: Solid Oxide Fuel Cell Material Challenges for Aircraft Applications. Proceedings of the North Atlantic Treaty Organization Symposium on Novel Vehicle Concepts and Emerging Vehicle Technologies (AVT-99), Brussels, Belgium, April 7-10, 2003. 115. Miyoshi, K.: Foreword: “Fretting Fatigue and Wear.” Tribology International 36 (2003) 69. 116. Miyoshi, K.: Carbon-Based Wear Coatings: Properties and Applications. Proceedings of the Seventh Applied Diamond Conference/Third Frontier Carbon Technology Joint Conference (ADC/FCT 2003), Tsukuba, Japan, Aug. 18-21, 2003, NASA/CP—2003-212319, pp. 404-405.

10

117. Miyoshi, K.; Lerch, B. A.; and Draper, S. L.: Fretting Wear of Ti-48Al-2Cr-2Nb. Tribology International 36 (2003) 145-153. 118. Miyoshi, K.; Lerch, B. A.; and Draper, S. L.: Fretting Fatigue of Gamma TiAl Studied. Research and Technology 2002, NASA/TM—2003-211990, March 2003. 119. Miyoshi, K.; Lerch, B. A.; and Draper, S. L. (Guest Editors): Special Issue on Fretting Fatigue. Tribology International 36 (2003). 120. Miyoshi, K.; Lerch, B. A.; Draper, S. L.; and Raj, S. V.: Evaluation of Ti-48Al-2Cr2Nb Under Fretting Conditions. ASTM International STP 1425 (March 2003) pp. 323-337. 121. Miyoshi, K.; Sutter, J. K.; Mondry, R. J.; Bowman, C.; Ma, K., Horan, R. A.; Naik, S. K.; and Cupp, R. J.: Measurements of Erosion Wear Volume Loss on Bare and Coated Polymer Matrix Composites. NASA/TM—2003-212628, Sept. 2003. 122. Miyoshi, K.; Sutter, J. K.; Mondry, R.; Ma, K.; Horan,; Naik, S.; and Cupp, R.: NASA Glenn/AADC-Rolls Royce Collaborated to Measure Erosion Resistance on Coated Polymer Matrix Composites. Research and Technology 2002, NASA/TM—2003-211990, March 2003. 123. Murakawa, M.; Miyoshi, K.; Koga, Y.; Schafer, L.; and Tzeng, Y., eds.: Proceedings of the Seventh Applied Diamond Conference/Third Frontier Carbon Technology Joint Conference (ADC/FCT 2003). Cosponsored by the Nippon Institute of Technology, National Institute of Advanced Industrial Science and Technology, Japan New Diamond Forum, Auburn University, and NASA Glenn Research Center, Tsukuba, Japan, Aug. 18-21, 2003, NASA/CP—2003-212319. 124. Nathal, M. V.; Ellis, D. L.; Loewenthal, W. S.; Raj, S. V.; Thomas-Ogbuji, L. A.; Ghosn, J.; Greenbauer-Seng, L.; Gayda, J.; and Barrett, C. A.: High Conductivity Materials for High Heat Flux Applications in Space Propulsion Systems. Proceedings of JANNAF Meeting, Dec. 1-5, 2003, Colorado Springs, Col. 125. Nesbitt, J. A.; Gleeson, B.; Sordelet, D.; and Barrett, C. A.: Pt and Hf Additions to NiAl Bond Coats and Their Effect on the Lifetime of Thermal Barrier Coatings. Materials Science Forum, vols. 426-432 (2003) pp. 209-214. 126. Srinivasan, R.; Daw, M. S.; Noebe, R. D.; and Mills, M. J.: Observations of Glide and Decomposition of a Dislocations at High Temperatures in Ni-Al Single Crystals Deformed along the Hard Orientation. Phil. Mag., vol. 83 (2003) 1111-1136. 127. Sudbrack, C. K.; Yoon, K. E.; Mao, Z.; Noebe, R. D.; Isheim, D.; and Seidman, D. N.: Temporal Evolution of Nanostructures in a Model Nickel Base Superalloy: Experiments and Simulations. Electron Microscopy: Its Role in Materials Science, eds., J. R. Weertman et al., TMS (2003) pp. 43-50.

11

128. Ogbuji, L.: Powder-Derived High-Conductivity Coatings for Copper Alloys. Powder Materials: Current Research & Industrial Practices III, F.D.S. Marquis, ed., TMS, Warrendale, Pa., pp. 293-300. 129. Ogbuji, L. and Humphrey, D. L.: Comparison of the Oxidation Rates of Some New Copper Alloys. Oxidation of Metals, vol. 60, nos. 3/4, Oct. 2003, pp. 271-291. 130. Ogbuji, L.; Humphrey, D.; and Setlock, J.: A Simplified Test for Blanching Susceptibility of Cu Alloys. Affordable Metal-Matrix Composites, A. Pandey, et al., eds., TMS, Warrendale, Pa., 2003, pp. 25-33. 131. Opila, E. J.: Oxidation and Volatilization of Silica Formers in Water Vapor. J. Am. Ceram. Soc., 86 [8] 1238-48 (2003). 132. Opila, E. J. and Myers, D. L.: Alumina Volatility in Water Vapor at Elevated Temperatures: Application to Combustion Environments. High Temperature Corrosion and Materials Chemistry IV, pp. 535-544, eds., E. Opila, P. Hou, T. Maruyama, B. Pieraggi, D. Shifler, and E. Wuchina, The Electrochemical Society, Inc., Pennington, N.J., 2003. 133. Opila, E. J.; Robinson, R. C.; and Cuy, M. D.: High Temperature Corrosion of Silicon Carbide and Silicon Nitride in Water Vapor. Advances in Science and Technology, 30, pp. 243- 254, 10th International Ceramics Congress Part A, ed., P. Vincenzini, Techna Srl, 2003. 134. Opila, E. J.; Robinson, R. C.; Fox, D. S.; Wenglarz, R. A.; and Ferber, M. K.: Additive Effects on Si3N4 Oxidation/Volatilization in Water Vapor. J. Am. Ceram. Soc., 86 [8] 1262-71 (2003). 135. Opila, E.; Hou, P.; Maruyama, T.; Pieraggi, B.; Shifler, D.; and Wuchina, E., editors: High Temperature Corrosion and Materials Chemistry IV. The Electrochemical Society, Inc., Pennington, N.J., 2003. 136. Petko, J. and Kiser, J. D.: Influence of Fiber Type and Fiber Coatings on the Properties of C/SiC Composites. Proceedings of the 27th Annual Conference on Composites, Materials, and Structures, Cape Canaveral/Cocoa Beach, Fla., Jan. 27-30, 2003. 137. Raj, S. V.: Tensile Creep of Polycrystalline Near-Stoichiometric NiAl. Materials Science & Engineering A356 (2003) 283-297. 138. Raj, S. V.; Ghosn, L. J.; Agarwal, A.; and Lachtrupp, T. P.: An Assessment of the Residual Stresses in Low Pressure Plasma Sprayed Coatings on an Advanced Copper Alloy. Surface Engineering: In Materials Science II, ed. by S. Seal, N. B. Dahotre, J. J. Moore, S. Suryanarayana and A. Agarwal, TMS (The Minerals, Metals & Materials Society), 2003, pp. 49-56.

12

139. Goldberg, R. K.; Roberts, G. D.; and Gilat, A.: Incorporation of Mean Stress Effects into the Micromechanical Analysis of the High Strain Rate Response of Polymer Matrix Composites. Composites: Part B 34 (2003) 151-165. 140. Robinson, R. C. and Verrilli, M. J.: Testing and Characterization of CMC Combustor Liners. Ceramic Engineering & Science Proceedings, vol. 24, issue 4, 2003, pp. 275-280. 141. Sayir, A.; Miyoshi, K.; and Farmer, S. C.: New Oxide Ceramic Developed for Superior High-Temperature Wear Resistance. Research and Technology, NASA/TM—2003-211990, March 2003. 142. Allred, R. E.; Shin, E. E.; Inghram, L.; McCorkle, L., Papadopoulos, D.; Wheeler, D.; and Sutter, J.: Effects of Sizings on the Durability of High Temperature Polymer Composites. Proceedings of the Fourteenth International Conference on Composite Materials (ICCM-14), Session 229; Durability of High Temperature Polymer Matrix Composites: Property-Performance-Durability Evaluation I, San Diego, Calif., July 14-18, 2003, Paper ID# 1818. 143. Allred, R. E.; Shin, E. E.; Inghram, L.; McCorkle, L.; Papadopoulos, D.; Wheeler, D.; and Sutter, J. K.: Thermomechanical Properties of M40J Carbon/PMR-II50 Composites. SAMPE 2003 Conference Proceedings, May 11-15, 2003, Long Beach, Cal., Book 2, p. 1514. 144. Allred, R.; Shin, E.; McCorkle, L.; Inghram, L.; Papadopoulos, D.; Wheeler, D.; and Sutter, J.: Thermomechanical Properties of Interface Modified M40J Carbon/PMRII-50 Composites. Proceedings of HIGH TEMPLE WORKSHOP 23, Jacksonville, Fla., Feb. 10-13, 2003, Paper K. 145. Jaehyung, J.; Prochazka, M.; Ronke, B.; Morgan, R.; and Shin, E. E.: Damage Assessment of Stress-Thermal Cycled High Temperature Polymer Matrix Composites. Proceedings of the Fourteenth International Conference on Composite Materials (ICCM-14), Session 312; Durability of High Temperature Polymer Matrix Composites: Property Performance-Durability Evaluation II, San Diego, Calif., July 14-18, 2003, Paper ID #1273. 146. Ju, J.; Prochazka, M.; Ronke, B.; Morgan, R.; Shin, E. E.; Lincoln, J.; and Curliss, D.: Damage Assessment of Stress-Thermal Cycled High Temperature Polymer Matrix Composites. Proceedings of HIGH TEMPLE WORKSHOP 23 Jacksonville, Fla., Feb. 10-13, 2003, Paper D. 147. Kumosa, M.; Gentz, M.; Armentrout, D.; Rupnowski, P.; Kumosa, L.; Shin, E.; and Sutter, J.: Analysis of Failure Mechanisms in Woven Graphite/Polyimide Composites with Medium and High Modulus Graphite Fibers Subjected to In-Plane Shear. Proceedings of HIGH TEMPLE WORKSHOP 23, Jacksonville, Fla., Feb. 10-13, 2003, Paper E.

13

148. Kumosa, M.; Gentz, M.; Rupnowski, P.; Armentrout, D.; Kumosa, L.; Shin, E.; and Sutter, J. K.: Mechanical Behavior of Woven Graphite/Polyimide Composites with Medium and High Modulus Graphite Fibers Subjected to Biaxial Shear Dominated Loads. Proceedings of the Fourteenth International Conference on Composite Materials (ICCM-14), Session 229; Durability of High Temperature Polymer Matrix Composites: Property-Performance-Durability Evaluation I, San Diego, Calif., July 14-18, 2003, Paper ID #1493. 149. McCray, D.; Smith, J.; Rice, B.; Blohowiak, K.; Anderson, R.; Shin, E.; McCorkle, L.; and Sutter, J.: The Evaluation of High Temperature Adhesive Bonding Processes for Rocket Engine Combustion Chamber Applications. Proceedings of HIGH TEMPLE WORKSHOP 23, Jacksonville, Fla., Feb. 10-13, 2003, Paper H. 150. Shin, E. E.; Sutter, J. K.; Juhas, J.; Veverka, A.; Klans, O.; Inghram, L.; Scheiman, D.; Papadopoulos, D.; Zoha, J.; Bubnick, J.; and Robitaille, S.: Studies on Hot-Melt Prepregging of PMR-II-50 Polyimide Resin with Graphite Fibers. SAMPE 2003 Conference Proceedings, May 11-15, 2003, Long Beach, Calif., Book 1, p. 1109. 151. Shin, E. E.; Thesken, J. C.; Sutter, J. K.; Chuang, K.; Juhas, J.; Veverka, A.; Inghram, L.; Papadopoulos, D.; Burke, C.; Scheiman, D.; McCorkle, L.; Klans, O.; Fink, J.; Arendt, C.; Tsotsis, T.; Keister, P.; Kollmansberger, R. B.; Armstrong, D.; Taylor, M.; Kumosa, M.; Rice, B.; and Gibson, T.: Effects of Fiber Reinforcement Architecture on the Hygrothermal-Mechanical Performance of Polyimide Matrix Composites for Aerospace Applications. Proceedings of the Fourteenth International Conference on Composite Materials (ICCM-14), Session 219, Durability of High Temperature Polymer Matrix Composites: Background, San Diego, Cal., July 14-18, 2003, Paper ID #1429. 152. Shin, E. E.; Thesken, J.; Sutter, J.; Chuang, K.; Juhas, J.; Veverka, A.; Inghram, L.; Burke, C.; Fink, J. E.; Arendt, C.; Tsotsis, T.; Keister, P.; Kollmansberger, R. B.; Armstrong, D.; Taylor, M.; Rice, B.; and Gibson, T.: Fiber Reinforcement Architectures of Polymer Matrix Composites on the Hygrothermal-Mechanical Performance for Aeropropulsion Applications. Proceedings of HIGH TEMPLE WORKSHOP 23, Jacksonville, Fla., Feb. 10-13, 2003, Paper G. 153. Stokes, E.; Shin, E.; and Sutter, J.: Mechanical Testing of Polymer Matrix Composites under Simulated Rapid Heat-Up Propulsion Environments (II. In-Plane Compression). Proceedings of HIGH TEMPLE WORKSHOP 23, Jacksonville, Fla., Feb. 10-13, 2003, Paper F. 154. Thesken, J. C.; Melis, M.; Shin, E.; Sutter, J.; and Fink, J.: Lightweight Design of a Composite Combustion Chamber Support. Proceedings of the 35th International SAMPE Technical Conference, Dayton, Ohio, Sept. 28-Oct. 2, 2003.

14

155. Thesken, J. C.; Shin, E. E.; Sutter, J. K.; Burke, C.; and Fink, J.: Durability of Polyimide Composites Subjected to Thermomechanical Fatigue in Reusable Propulsion Systems. Proceedings of the Fourteenth International Conference on Composite Materials (ICCM-14), Session 312; Durability of High Temperature Polymer Matrix Composites: Property- Performance-Durability Evaluation II, San Diego, Calif., July 14-18, 2003, Paper ID #1528. 156. Thesken, J.; Melis, M.; Shin, E.; Sutter, J.; Burke, C.; and Fink, J.: Design Analysis and Thermo-Mechanical Fatigue of a Polyimide Composite for Combustion Chamber Support. Proceedings of HIGH TEMPLE WORKSHOP 23, Jacksonville, Fla., Feb. 10-13, 2003, Paper K. 157. Lewinsohn, C. A.; Henager, C. H., Jr.; and Singh, M.: Brazeless Approaches to Joining of Silicon Carbide-Based Ceramics for High Temperature Applications. Advances in Joining of Ceramics, ed. by C. A. Lewinsohn, M. Singh, and R. Loehman, Ceramic Transactions, vol. 138, The American Ceramic Society, (2003), Westerville, Ohio, 201-208. 158. Lewinsohn, C. A.; Singh, M.; and Loehman, R., eds.: Advances in Joining of Ceramics. Ceramic Transactions, vol. 138, The American Ceramic Society, Westerville, Ohio (2003). 159. Martinez Fernandez, J.; Munoz, A.; de Arellano Lopez, A. R.; Valera Feria, F. M.; Dominguez-Rodriguez, A.; and Singh, M.: Microstructure-Mechanical Properties Correlation in Siliconized Silicon Carbide Ceramics. Acta Materialia 51 (2003) 32593275. 160. Singh, M. and Yee, B. M.: Light Weight Biomorphous Cellular Ceramics from Cellulose Templates. Proceedings of 2nd International Fulrath Memorial Symposium, Tokyo, Japan (2003). 161. Singh, M. and Yee, B-M.: Reactive Processing of Environmentally Conscious, Biomorphic Ceramics from Natural Wood Precursors. Journal of the European Ceramic Society 24 (2003) 209-217. 162. Smialek, J. L.: A Deterministic Interfacial Cyclic Oxidation Spalling Model. Acta Materialia 51, 2, (2003) 469-483. 163. Smialek, J. L.: Predicting Material Consumption by Cyclic Oxidation Spalling Models. Materials Lifetime and Engineering Symposium, P. K. Liaw et al., eds. TMS, Warrendale, Penn., pp. 147-154 (2003). 164. Smialek, J. L.: Improved Oxidation Life of Segmented Plasma Sprayed 8YSZ Thermal Barrier Coatings. Thermal Spray 2003, Advancing the Science and Applying the Technology, B. R. Marple and C. Moreau, eds., ASM, Materials Park, Ohio, pp. 1463-1470 (2003).

15

165. Gentz, M.; Armentrout, D.; Rupnowski, P.; Kumosa, L.; Sutter, J. K.; and Kumosa, M.: Mechanical Behavior of a Woven Graphite/PMR-15 Composite at Room and Elevated Temperatures Determined from the +/-45 Off Axis and Iosipescu Tests. Composites Technology & Research 25 (1) 2003, pp. 22-34. 166. Ivosevic, M.; Knight, R.; Kalidindi, S. R.; Palmese, G. R.; and Sutter, J. K.: Erosion/Oxidation Resistant Coatings for High Temperature Polymer Composites. High Performance Polymers 15 (4) 2003, p. 530. 167. Ivosevic, M.; Knight, R.; Kalidindi, S. R.; Palmese, G. R.; and Sutter, J. K.: Microstructure and Properties of Thermally Sprayed Functionally Graded Coatings for Polymeric Substrates. NASA/TM—2003-212119, March 2003. 168. Ivosevic, M.; Knight, R.; Kalidindi, S. R.; Palmese, G. R.; Tsurikov, A.; and Sutter, J. K.: Optimal Substrate Preheating Model for Thermal Spray Deposition of Thermosets onto Polymer Matrix Composites. NASA/TM—2003-212120, March 2003. 169. Naik, S. K.; Sutter, J. K.; Horan, R.; Miyoshi, K.; Bowman, C.; Ma, K.; Leissler, G.; Sinatra, R.; and Cupp, R.: Erosion Resistant Coatings for Polymer Matrix Composites in Propulsion Applications. SAMPE 2003 International Symposium, May 2003. 170. Ndalama, T.; Vasquez, D. L.; Hirschfeld, D. A.; and Sutter, J. K.: Surface Modification of Polyimide Composites by Rf Plasma and UV/Ozone Treatments. High Performance Polymers, 15 (4) 2003 pp. 441-473. 171. Sutter, J. K.: High Temperature Polymers in Aerospace Applications. Proceedings of the Fourteenth International Conference on Composite Materials (ICCM-14), Session 219, Durability of High Temperature Polymer Matrix Composites: Property-Performance-Durability Evaluation II, San Diego, Calif., July 14-18, 2003, Paper ID#1684. 172. Sutter, J. K.; Naik, S. K.; Horan, R.; Miyoshi, K.; Bowman, C.; Ma, K.; Leissler, G.; Sinatra, R.; and Cupp, R.: Erosion Coatings for Polymer Matrix Composites in Propulsion Applications. High Performance Polymers, 15 (4) 2003, pp. 421-441. 173. Sutter, J. K.; Naik, S. K.; Horan, R.; Miyoshi, K.; Bowman, C; Ma, K.; Leissler, G.; Sinatra, R.; and Cupp, R.: Erosion Resistant Coatings for Polymer Matrix Composites in Propulsion Applications. NASA TM—2003-212201. 174. Kalluri, S. and Verrilli, M. J.: Influence of Holes on the In-Plane Tensile Strength and Fatigue Durability of a Nicalon™/SI-N-C Ceramic Matrix Composite. Ceramic Engineering & Science Proceedings, vol. 24, issue 4, 2003, pp. 427-434. 175. Roth, D. J.; Cosgriff, L. M.; Martin, R. E.; Verrilli, M. J.; and Bhatt, R. T.: Microstructural and Defect Characterization in Ceramic Composites using an Ultrasonic Guided Wave Scan System. NASA/TM—2003-212518, Aug. 2003.

16

176. Sun, J. G.; Verrilli, M. J.; Stephan, R.; Barnett, T. R.; and Ojard, G.: Nondestructive Evaluation of Ceramic Matrix Composite Combustor Components. Review of Quantitative Nondestructive Evaluation, vol. 22, ed. by D. O. Thompson and D. E. Chimenti, American Institute of Physics, AIP Conference Proceedings 657, 2003, pp. 1011-1018. 177. Verrilli, M. J. and Calomino, A.: Temperature Dependence on the Strength and Stress Rupture Behavior of a Carbon-Fiber Reinforced Silicon Carbide Matrix (C/SiC) Composite. Ceramic Engineering & Science Proceedings, vol. 24, Issue 4, 2003, pp. 443-449. 178. Verrilli, M. J.; DiCarlo, J. A.; Yun, H.; and Barnett, T. R.: Hoop Tensile Characterization of SiC/SiC Cylinders Fabricated from 2D Fabric. Ceramic Engineering & Science Proceedings, vol. 24, issue 4, 2003, pp. 407-413. 179. Kostorz, G.; Lavernia, E. J.; Werner, E.; Kato, M.; and Whittenberger, J. D., Editors: Materials Science & Engineering A, Structural Materials: Properties, Microstructure and Processing. 180. Whittenberger, J. D. and Darolia, R.: 1100 to 1500 K Slow Plastic Compressive Behavior of NiAl-xCr Single Crystals. NASA/TM—2003-212488, Sept. 2003. 181. Yun, H. M.; DiCarlo, J. A.; Bhatt, R. T.; and Hurst, J. B.: Processing and Structural Advantages of the Sylramic-iBN SiC Fiber for SiC/SiC Components. Ceram. Eng. Sci. Proc. 24 (3) p. 247, 2003. 182. Choi, S. R.; Zhu, D.; and Miller, R. A.: Mixed Mode Fracture of Plasma-Sprayed Thermal Barrier Coatings at Ambient and Elevated Temperatures. Ceramic Eng. Sci. Proc., vol. 24, issue 3, pp. 555-560. 183. Choi, S. R.; Zhu, D.; and Miller, R. A.: Mode I, Mode II, and Mixed-Mode Fracture Plasma-Sprayed Thermal Barrier Coatings at Ambient and Elevated Temperatures. NASA/TM—2003-212185, March 2003. 184. Choi, S. R.; Zhu, D.; and Miller, R. A.: Strength, Fracture Toughness, Fatigue, and Standardization Issues of Free-Standing Thermal Barrier Coatings. NASA/TM—2003-212516, July 2003. 185. Zhu, D.; Bansal, N. P.; and Miller, R. A.: Thermal Conductivity and Stability of HfO2-Y2O3 and La2Zr2O7 Evaluated for 1650 °C Thermal/Environmental Barrier Coating Applications. Advances in Ceramic Matrix Composites IX, N. P. Bansal, J. P. Singh, W. M. Kriven and H. Schneider (eds.), The American Ceramic Society, Westerville, Ohio (2003), Ceram. Trans., 153, 331-343 (2003). Also NASA/TM—2003-212544, ARL-TR-3093. 186. Zhu, D.; Chen, Y. L.; and Miller, R. A.: Defect Clustering and Nano-Phase Structure Characterization of Multi-Component Rare Earth Oxide Doped Zirconia-Yttria Thermal Barrier Coatings. Ceramic Eng. Sci. Proc., vol. 24, issue 3, pp. 525-534, 2003. 17

187. Zhu, D.; Choi, S. R.; Eldridge, J. I.; Lee, K. N.; and Miller, R. A.: Surface Cracking and Interface Reaction Associated Delamination Failure of Thermal and Environmental Barrier Coatings. Ceramic Eng. Sci. Proc., vol. 24, issue 3, pp. 469-475, 2003. Also NASA/TM—2003-212318, ARL-TR-2969, April 2003. .

18

Appendix A Authors List Bansal

Barrett Bhatt

1,2,3,4,5,6,7,8,9,10,11 90,91,92,185

Fox

67,84,90,91,92,134

Freedman

23,68

Gabb

69,71,72

Gayda

69,70,71,72,73,124

12,124,125 13,14,15,16,17,55,56, 57,58,59,86,175,181

Greenbauer-Seng

Bowles18,19

124

Bowman

20,21,22,23,60

Halbig

74,75,103,105

Bozzolo

24,25,26,27,28,29, 30,31,32,33,34

Hebsur

76,77

Hull

78

35,36,80,81,82,103, 105,177

Humphrey

67,129,130

Campbell

37,113

Hurst

59,181

Chen

186

Hurwitz

36,79,80,81,82,83

Chuang

38,39,40,41,109,113, 151,152

Inghram

18,37,142,143,144, 150,151,152

Cuy

133

Jacobson

84

de Groh

42,43,44,45,46,47

Jaskowiak

85

DiCarlo

16,48,49,50,51,52,53, 54,55,56,57,58,59,74, 86,178,181

Johnston

37

Kiser

74,86,88,136

Draper

60,117,118,119,120

Kuczmarski

87

Dynys

61

Lang

68,88

Eldridge

62,63,64,65,80,90,91,187

Lee

89,90,91,92,93,94,187

Ellis

124

Leissler, G.

169,172,173

Farmer

65,66,141

Leventis

95,96,97,98,99,100

Calomino

19

Levine

101,102,103,104,105

Raj

120,124,137,138

Locci

60

Ritzert

23,60

Loewenthal

124

Roberts

19,139

MacKay

106

Robinson

75,91,92,133,134,140

McCorkle

18,37,142,143,144,149, 151

Sayir

65,66,141

Scheiman

18,108,150,151

McCue

16,55 Setlock

130

Meador. MAB 107,108 Shin Meador, M.A. 109,110,111,112,113

142,143,144,145,146, 147,148,149,150,151, 152,153,154,155,156 185,186,187 Singh 68,102,104,157,158, 159,160,161

Miller

90,91,92,182,183,184,

Misra

114

Miyoshi

115,116,117,118,119, 120,121,122,123,141, 169,172,173

Smialek

84,162,163,164

Spuckler

64

Morscher

56,57,58,59,86

Sutter

Nathal

60,124

Nesbitt

60,64,125

121,122,142,143,144, 147,148,149,150,151, 152,153,154,155,156, 165,166,167,168,169, 170,171,172,173

Nguyen

67

Verrilli

35,75,103,105,140, 174,175,176,177,178

Noebe

25,27,28,29,34,77, 126,127

Whittenberger 179,180

Ogbuji

124,128,129,130

Yun

Opila

67,75,84,101,103,104,

Papadopoulos 18,142,143,144,150 Petko

52,53,54,56,57,58,59, 86,178,181 131,132,133,134,135 Zhu 4,90,91,92,182,183, 184,185,186,187

68,86,88,136,151

20

Appendix B Subject Matter Superalloys

12,20,22,23,60,69,70,71,72,73,106,117,118,127, 162,163,164,179

Other Metals

12,21,23,43,45,76,124,162,163,179

Intermetallics

12,25,27,28,34,60,84,117,118,124,126,137,162, 163,179,180

Fibers

18,19,52,54,86,179,181

Ceramics

5,11,12,15,17,23,61,66,67,89,90,91,92,93,94,114, 131,132,133,134,135,141,157,158,159,160,161, 179,182,183,184,185,186

Composites, Metal/Intermetallic

77,179

Composites, Polymer

18,19,38,39,41,100,109,113,121,122,139,145,146, 148,150,151,152,165,166,167,168,169,170,171,172, 173,179

Composites, Ceramic

1,2,3,4,5,6,7,8,9,10,13,14,16,35,36,48,49,50,53,55, 56,57,58,59,68,74,75,79,80,81,82,83,84,85,86,88, 89,90,91,92,93,94,100,101,102,103,104,105,136, 140,158,174,175,176,177,178,179,181,187

Polymers

18,19,37,107,108,110,111,149,179

Oxidation/Corrosion

12,18,19,67,74,75,84,115,117,118,119,120,124,125, 129,131,132,133,134,135,162,163,164,179

TBC’s

62,63,64,65,125,164,179,182,183,184,185,186,187

Coatings

60,62,63,64,65,79,84,89,90,91,92,93,94,116,121, 122,123,124,125,128,138,179,185,186,187

Materials Characterization

6,9,12,13,16,18,19,20,22,62,63,64,65,67,69,74,75, 76,77,78,89,90,91,92,93,94,115,116,117,118,119, 120,121,122,123,130,147,153,155,156,175,177, 179,182,183,184,185,186,187

Materials Applications

15,17,21,68,75,114,116,119,122,123,154,174,176, 178,179 21

Surfaces/Interfaces

24,25,26,27,28,29,30,31,32,33,115,116,119,120, 121,122,123,142,143,144,158,179

General Reviews

2,12,24,27,28,51,114

Other

27,40,42,43,44,46,47,87,95,96,97,98,99,106,112

22