Pb-free leadwire. Pb-free PET sleeve. DD. 6.3. ED. 8 · 10. PD. 12.5 to 18. HD. 22 ·
25 ... PT. Smaller. • Please refer to page 20 about the end seal configulation.
ALUMINUM ELECTROLYTIC CAPACITORS
PB
Miniature Sized, High Ripple Current High Reliability series
High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC).
CA
PB
Long Life
Products which are scheduled to be discontinued. Not recommended for new designs
Smaller
PT
Specifications Item
Performance Characteristics
Category Temperature Range
– 40 to +105°C (10 to 50V), – 25 to +105°C (160 to 450V)
Rated Voltage Range
10 to 450V
Rated Capacitance Range
0.47 to 3300µF
Capacitance Tolerance
± 20% at 120Hz, 20°C Rated Voltage (V)
Leakage Current
10 to 50V
160 to 450V After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) .
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
———
Measurement frequency : 120Hz at 20°C
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX.)
10 0.30
16 0.25
25 0.22
35 0.18
50 0.15
160 0.15
200 0.15
250 0.15
350 0.20
400 0.24
450 0.24
Measurement frequency : 120Hz Rated voltage (V)
Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C
10 3
16 2
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours (7000 hours for φD=10 and 12.5 (10 to 50V)) at 105°C, the peak voltage shall not exceed the rated voltage.
Endurance
25 2
35 2
50 2
160 3
200 3
250 3
350 4
400 6
450 6
Within ± 30% of the initial capacitance value (10 to 50V) Within ± 20% of the initial capacitance value (160 to 450V)
Capacitance change
300% or less than the initial specified value (10 to 50V) 200% or less than the initial specified value (160 to 450V) Less than or equal to the initial specified value
tan δ Leakage current
Shelf Life
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking
Printed with white color letter on dark brown sleeve.
10k to 50kHz 100kHz or more 1.55 1.65 1.25 1.30 1.10 1.15 1.80 2.00
: Rated ripple current (mArms) at 105°C 120Hz : Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system.