architecture in steel - Dynamic Architectural Windows and Doors

41 downloads 292 Views 6MB Size Report
The new cold rolled steel in combination with the glass ... AAMA & ASTM Testing: Proven Window & Door Performance. 5 ... Steel “L” Glazing Stop Details. 56.
ARCHITECTURE IN STEEL

THERMALLY-BROKEN PERFORMANCE WITH NARROW SIGHT LINES Whether it’s the conversion of an industrial warehouse, a landmark building in a historic district or a tightly controlled University specification the combination of glazing flexibility, energy performance and narrow thermally broken profiles is a unique combination.

a wide range of glass specification flexibility without the need of special setup costs or profiles. Whether it is triple glazed, double glazed or combinations of thicker laminated glass & high performance glasses, the flexibility is unique in the steel window industry.

The profile face features widths from 1” to 1 9/16”. The new cold rolled steel in combination with the glass fibre-reinforced high performance composite thermalbreak results in minimal heat loss with superior strength and stability when compared to traditional hot rolled profiles. The 2 3/8ths inch deep frame accommodates

Steel-Arte is also a superior solution for luxury residential applications. The strength of the Steel-Arte coupled with the narrow profile design is a natural for window walls where the mullions are small and the minimal glass to glass dimension are critical to the clean, crisp geometric look of the aesthetic.

www. dynamicwindows. co m

INDEX

Page

OVERVIEW

Steel-Arte Introduction Why Choose Dynamic Steel? Steel-Arte Glazing Flexibility High Performance Dual or Triple Insulating Glass Historic Authenticity with Lead Glass Overlay NFRC Certified Glazing Performance AAMA & ASTM Testing: Proven Window & Door Performance

2 4 4 4 5 5 5

WINDOW DETAILS OUTSWING

Casement - Venting or fixed configurations French Casement Awning Awning in Typical Window Wall

7 8 10 11

Casement - Venting or fixed configurations French Casement Hopper Direct Glazed

13 14 16 17

INSWING

DOOR DETAILS OUTSWING

Steel-Arte Door Stile & Rail Door

19 21

Steel-Arte Door Stile & Rail Door

24 26

INSWING

OPTIONS & ACCESSORIES

Traditional Casement Profile - for Historic Appplications Mullion Reinforcement Options Radius Profiles Drip Cap Options Window Hardware Options Glazing Stop Options

WINDOW WALL EXAMPLES

S1 Glazing Stop Details S3 Glazing Stop Details Steel “L” Glazing Stop Details Typical Installation Details

29 30 31 32 33 36

38 50 56 64

www. dynamicwindows. co m

WHY CHOOSE DYNAMIC STEEL? Over the last 20 years Dynamic Architectural Windows & Doors has manufactured custom windows and doors for hundreds of the finest architecturally designed luxury homes and historical restorations in North America. It was only after repeated requests from our best architect and builder customers that Dynamic made the decision to add steel windows and doors to the manufacturing line up. Our customers provided us with a detailed wish list of what was needed in the steel window industry in North America. Their steel wish list included the following:

· · ·

Narrow profiles that would meet the aesthetic design criteria of both the luxury residential and historical replacements markets. Thermally broken frames and sash that would reduce the potential for room-side condensation (a repetitive problem with conventional nonthermally broken steel windows). Window and door designs that accommodate a wide range of double and triple glazed options, to meet each unique project requirement.

STEEL-ARTE GLAZING FLEXIBILITY Narrow sightlines, superior strength and unmatched durability have long been the attractive design components of using steel windows & doors, but these attributes have been often overshadowed by the potential of condensation and poor thermal efficiency. Dynamic Steel-Arte introduces a unique solution to these design concerns with thermally broken frame & sash components coupled with unmatched glazing flexibility.

· · ·

Third party tested window designs that meet the evolving energy codes, complete with NFRC and AMMA testing. Optional third party structural engineering services to provide an extra level of confidence in project specific design performance. An industry leading business model with dependable & accurate lead time estimates, concise communication, timely turnaround of shop drawings and clearly defined expectations in all aspects of the window designing and manufacturing process. Dynamic is known for the ability to meet the expectations of this demanding niche.

HIGH PERFORMANCE DUAL OR TRIPLE INSULATING GLASS The 1 3/4” overall glazing cavity accommodates an unlimited combination of high performance glass types, thicknesses and spacer bar materials. Whether it’s thermal performance, sound abatement, security or a combination of performance objectives the flexibility is available to meet the most stringent performance specifications.

The glazing flexibility is an important component of a steel window or doors overall performance. The oversized glazing cavity of the Steel-Arte thermally broken frame & sash allows facilitates glass thicknesses up to 1 3⁄4 inches.

www. dynamicwindows. com

Back to Index - 4

HISTORIC AUTHENTICITY WITH LEAD GLASS OVERLAY The use of applied lead or zinc overlays is a proven technique for replicating the appearance of true leaded glass without the expense and performance issues associated with traditional metal caming or leaded glass. Dynamic takes Lead Glass Overlay to a higher level by applying the lead or zinc to the exterior and room side of the insulating glass and includes a metal spacer between the two insulating glass surfaces. The internal grid appearance is authentic and when coupled with warm edge spacer bars, argon gas, and a variety of low E coatings; the final performance will meet any of today’s stringent energy codes. Available in a selection of widths and patina colors, the use of Lead or Zinc Glass Overlay with an internal grid is an excellent solution for both historical replacements or luxury residential homes where a narrow muntin is important.

NFRC CERTIFIED GLAZING PERFORMANCE Dynamic Steel-Arte is one of the few steel windows & doors on the market today that are tested and certified to the NFRC (National Fenestration Rating Council) performance standards. In many areas of the country the state and local building codes are requiring verifiable glazing performance using the NFRC certified labels on each product.

AAMA & ASTM TESTING: PROVEN WINDOW & DOOR PERFORMANCE In addition to the complete range of European performance testing completed by our Swiss partner at the time of initial design, Dynamic Steel-Arte windows and doors have also independently lab tested for Air, Water, and Structural performance using the recognized North American standard AAMA / WDMA / CSA / 101 / IS2 / A440.

www. dynamicwindows. com

Back to Index - 5

WINDOW ELEVATIONS

Outswing Casement

Outswing French Casement

Outswing Awning

Venting or fixed configurations

Inswing Casement

Inswing French Casement

Venting or fixed configurations

Outswing Awning in Window Wall

SECTIONAL DETAILS FOR EACH DESIGN IS INCLUDED IN THIS OVERVIEW. THESE ARE THE STANDARD DETAILS. FOR ADDITIONAL DESIGN FLEXIBILITY QUESTIONS CALL THE DYNAMIC SALES TEAM AT 1.800.661.8111 Direct Glazed

Inswing Hopper

www.dynamicwindows. com

Back to Index - 6

1

OUTSWING CASEMENT MAX. VENTING DIMENSIONS: CONFIGURATION: 

3

31 1/2 “ X 63” VENTING OR FIXED

2 OUTSWING CASEMENT

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 7

1 4

OUTSWING FRENCH CASEMENT MAX. DIMENSIONS:

3

63“ X 63”

2 OUTSWING FRENCH CASEMENT

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 8

1 4

OUTSWING FRENCH CASEMENT MAX. DIMENSIONS:

3

63“ X 63”

2 OUTSWING FRENCH CASEMENT

L profile

4

Z profile

h profile

MEETING STILE DETAILS

www.dynamicwindows. com

Back to Index - 9

1

OUTSWING AWNING MAX. DIMENSIONS:

3

63” x 31 1/2“

2 OUTSWING AWNING

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 10

1 4

OUTSWING AWNING IN WINDOW WALL MAX. DIMENSIONS (AWNING):

63” x 31 1/2“

3

2

OUTSWING AWNING IN WINDOW WALL

L profile

1

AWNING HEAD DETAIL

2

AWNING SILL DETAIL

3

AWNING JAMB DETAIL

Z profile

www.dynamicwindows. com

h profile

Back to Index - 11

1 4

OUTSWING AWNING IN WINDOW WALL MAX. DIMENSIONS (AWNING):

63” x 31 1/2“

3

2

OUTSWING AWNING IN WINDOW WALL

L profile

4

Z profile

h profile

OUTSIDE JAMB DETAILS

www.dynamicwindows. com

Back to Index - 12

1

INSWING CASEMENT MAX. VENTING DIMENSIONS: CONFIGURATION: 

3

31 1/2 “ X 63” VENTING OR FIXED

2 INSWING CASEMENT

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 13

1 4

INSWING FRENCH CASEMENT MAX. DIMENSIONS:

3

63“ X 63”

2 INSWING FRENCH CASEMENT

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 14

1 4

INSWING FRENCH CASEMENT MAX. DIMENSIONS:

3

63“ X 63”

2 INSWING FRENCH CASEMENT

L profile

4

Z profile

h profile

MEETING STILE DETAILS

www.dynamicwindows. com

Back to Index - 15

1

INSWING HOPPER MAX. DIMENSIONS:

3

63“ X 31 1/2”

2 INSWING HOPPER

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 16

1

DIRECT GLAZED

3 2 DIRECT GLAZED

L profile

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

Z profile

www.dynamicwindows. com

h profile

Back to Index - 17

DOOR ELEVATIONS

STEEL-ARTE DOOR SERIES MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

108” 36” (PER SLAB)

Inswing steel-arte Door

Inswing steel-arte Double Door

Outswing steel-arte Door

Outswing steel-arte Double Door

Outswing Stile & Rail Door

Outswing Stile & Rail Double Door

STILE & RAIL DOOR SERIES MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

120” 48” (PER SLAB)

Inswing Stile & Rail Door

Inswing Stile & Rail Double Door

www.dynamicwindows. com

Back to Index - 18

1

OUTSWING STEEL-ARTE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

108” 36”

3 2 OUTSWING STEEL-ARTE DOOR

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

www.dynamicwindows. com

Back to Index - 19

1

OUTSWING STEEL-ARTE DOUBLE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

108” 36” (PER SLAB)

3 2 OUTSWING STEEL-ARTE DOUBLE DOOR

1

HEAD DETAILS

2

SILL DETAILS

3

JAMB DETAILS

www.dynamicwindows. com

Back to Index - 20

1

OUTSWING STILE & RAIL DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

120” 50”

3 2 OUTSWING STILE & RAIL DOOR

2 3/8"

13/16"

1 9/16"

3 7/16"

1 9/16"

9/16"

1

HEAD DETAILS

1 3/16"

2

SILL DETAILS 7/8"

3 7/16"

1 9/16"

13/16"

1 3/16"

1/4"

thresholds available in aluminum, bronze or assorted hardwoods

1 1/8"

varies

varies

1 9/16"

13/16"

13/16"

1 9/16"

1 9/16"

2 3/8"

1 3/16"

1 9/16"

check valve for drainage under positive pressure

3 7/8"

JAMB DETAILS

2 3/8"

3

medium exposure threshold

3 7/16"

3 7/16"

www.dynamicwindows. com

Back to Index - 21

1

OUTSWING STILE & RAIL DOUBLE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

4

120” 48” (PER SLAB)

3 2 OUTSWING STILE & RAIL DOUBLE DOOR

2 3/8"

13/16"

1 9/16"

3 7/16"

1 9/16"

9/16"

1

HEAD DETAILS

1 3/16"

2

SILL DETAILS 7/8"

3 7/16"

1 9/16"

13/16"

1 3/16"

1/4"

thresholds available in aluminum, bronze or assorted hardwoods

1 1/8"

varies

varies

2 9/16"

1 9/16" 13/16"

3 7/16"

13/16" 1 9/16"

2 7/16"

3 7/16"

www.dynamicwindows. com

1 9/16"

2 3/8"

1 3/16"

13/16"

1 9/16" 13/16"

2 3/8"

1 9/16"

check valve for drainage under positive pressure

3 7/8"

JAMB DETAILS

1 3/16"

3

medium exposure threshold

3 7/16"

Back to Index - 22

1

OUTSWING STILE & RAIL DOUBLE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

120” 48” (PER SLAB)

4 3 2 OUTSWING STILE & RAIL DOUBLE DOOR

4

LOCKSET DETAILS

2 7/16"

3 7/16"

3 7/16"

www.dynamicwindows. com

Back to Index - 23

1

INSWING STEEL-ARTE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

108” 36”

3 2 INSWING STEEL-ARTE DOOR

1

HEAD DETAILS

2

SILL DETAILS saddle secured to floor

3

sill with drop down sweep

JAMB DETAILS

www.dynamicwindows. com

Back to Index - 24

1

INSWING STEEL-ARTE DOUBLE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

108” 36” (PER SLAB)

3 2 INSWING STEEL-ARTE DOUBLE DOOR

1

HEAD DETAILS

2

SILL DETAILS saddle secured to floor

3

sill with drop down sweep

JAMB DETAILS

www.dynamicwindows. com

Back to Index - 25

1

INSWING STILE & RAIL DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

120” 50”

3 2 INSWING STILE & RAIL DOOR

1

HEAD DETAILS

13/16"

2 7/16"

2 9/16"

1 9/16"

9/16"

2 3/8"

1 3/16"

2

SILL DETAILS 7/8"

thresholds available in aluminum, bronze or assorted hardwoods

2 9/16"

2 7/8"

13/16"

1 3/16"

1 1/8"

1 9/16" 3/16"

4 3/4"

medium exposure threshold

7 1/8"

13/16"

13/16"

2 9/16"

9/16"

2 9/16"

1 9/16"

2 7/16"

www.dynamicwindows. com

2 3/8"

1 13/16"

9/16"

2 3/8"

3

JAMB DETAILS

2 7/16"

1 9/16"

Back to Index - 26

1

INSWING STILE & RAIL DOUBLE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

4

120” 48” (PER SLAB)

3 2 INSWING STILE & RAIL DOUBLE DOOR

HEAD DETAILS

1

13/16"

2 7/16"

2 9/16"

1 9/16"

9/16"

2 3/8"

1 3/16"

SILL DETAILS

2

7/8"

thresholds available in aluminum, bronze or assorted hardwoods

2 9/16"

2 7/8"

13/16"

1 3/16"

1 1/8"

1 9/16" 3/16"

4 3/4"

medium exposure threshold

7 1/8"

JAMB DETAILS

3

2 9/16"

13/16"

13/16"

2 9/16"

1 9/16" 13/16"

13/16"

2 9/16"

1 9/16"

2 7/16"

2 3/8"

2 3/8"

1 3/16"

9/16"

2 7/16"

3 7/16"

www.dynamicwindows. com

2 7/16"

1 9/16"

Back to Index - 27

1

INSWING STILE & RAIL DOUBLE DOOR MAX. DOOR HEIGHT: MAX. DOOR WIDTH:

120” 48” (PER SLAB)

4 3 2 INSWING STILE & RAIL DOUBLE DOOR

4

LOCKSET DETAILS

3 7/16"

2 7/16"

www.dynamicwindows. com

2 7/16"

Back to Index - 28

TRADITIONAL CASEMENT PROFILE FOR HISTORIC APPLICATIONS

For over 20 years Dynamic Architectural Windows & Doors has worked closely with landmark associations and numerous historic preservation authorities to develop unique solutions for historically significant buildings across North America. With the introduction of the Steel-Arte line of products that commitment continues with the new Traditional Casement Profile. This traditional profile delivers the same tested performance and thermally-broken benefits of the other Steel-Arte designs and adds the exterior shadow lines of the historic putty profiles of yesterday.

www. dynamicwindows. com

Back to Index - 29

MULLION REINFORCEMENT OPTIONS FACTORY -APPLIED, LASER WELDED

varies

≥ 3/16”

≥ 3/16”

varies

3

2

varies

1

1/16”

3/8”

5

4

6

2” varies

1/16”

1 9/16”

7

1”

1”

1”

1/8”

1”

2 1/8”

2”

laser welded "L" profile

mechanically fastened "L" profile

8

9

3/8”

3/8”

≥ 3/16”

1/16”

www. dynamicwindows. com

varies

varies

varies

1/16”

Back to Index - 30

RADIUS PROFILES 3

2

1

2

1

inswing designs

frame only

Minimum R

Type

3

outswing designs

Glazing Stop

R

Minimum R R

16”

R

16”

16”

R

16”

* NOTE: MINIMUM RADIUS IS THE SAME ON THE "L", "Z" AND "H" THERMALLY BROKEN PROFILES R

16”

www. dynamicwindows. com

Back to Index - 31

DRIP CAP OPTIONS

L profile

Z profile

h profile

DRIP CAPS ARE OPTIONAL ON OUTSWING PROFILES

DRIP CAPS ARE REQUIRED ON INSWING PROFILES

www. dynamicwindows. co m

Back to Index - 32

WINDOW HARDWARE OPTIONS TYPE 1 HANDLE - STEEL-ARTE TRADITIONAL CAM HANDLE

TYPE 2 HANDLE - STEEL-ARTE CONTEMPORARY CAM HANDLE

www. dynamicwindows. co m

Back to Index - 33

WINDOW HARDWARE OPTIONS TYPE 3 HANDLE - STEEL-ARTE EURO CAM HANDLE

www. dynamicwindows. co m

Back to Index - 34

WINDOW HARDWARE OPTIONS CASEMENT HINGE OPTIONS

STEEL-ARTE CASEMENT WELDED HINGE

STEEL-ARTE CASEMENT SCREW-ON HINGE

STEEL-ARTE CASEMENT EXTENDED HINGE

www. dynamicwindows. co m

Back to Index - 35

ALUMINUM GLAZING STOP OPTIONS TYPE S4

9/16”

13/16”

1”

1 3/16”

9/16”

9/16”

9/16”

1/8”

www. dynamicwindows. co m

9/16”

TYPE S3

1/8”

TYPE S2

1/8”

TYPE S1

Back to Index - 36

STEEL GLAZING STOP OPTION “L ” STOP

REGLETS WITH DIFFERENT CONTOURS & GLASS THICKNESSES

varies

9/16”

5/32”

Steel-Arte “L” glass stop creates interesting reglets & contours for a unique contemporary or industrial appearance

www. dynamicwindows. co m

Back to Index - 37

S1 GLAZING STOP DETAILS OUTSWING WINDOW WALL

1

3

1

3

3

3

2

5

7

1

3/8”

9/16”

2

4

1

1 - L FRAME PROFILE

5/32”

9/16”

6

2

5 7

1 - H FRAME PROFILE

2

2

2

7

1

6

4

1

5/32”

3/8”

1 9/16”

9/16” 1”

www. dynamicwindows. com

Back to Index - 38

S1 GLAZING STOP DETAILS OUTSWING WINDOW WALL

2

3 5/32”

9/16”

3/8”

3/8”

13/16”

9/16”

9/16”

1 9/16”

4

5/32”

13/16”

5/32”

5/32”

9/16”

2 3/8”

3/8”

9/16”

3/8”

5/32”

3/8”

5

9/16”

2 3/8”

5/32”

13/16”

3/8”

45/64”

5/32”

17/64”

9/16”

2 3/8”

www. dynamicwindows. com

Back to Index - 39

S1 GLAZING STOP DETAILS

5/32” 3/8”

9/16”

5/32”

9/16”

3/8”

2 3/8”

13/16”

6

5/32” 3/8”

13/16”

9/16”

3/8”

9/16”

7

2 3/8”

OUTSWING WINDOW WALL

www. dynamicwindows. com

Back to Index - 40

S1 GLAZING STOP DETAILS INSWING WINDOW WALL

1

1

2

2

2

2

1

5

4

5 3

1

4

3

6

6

1 - H FRAME PROFILE

6

1

1 - L FRAME PROFILE

5/32”

9/16”

3/8”

9/16”

1

5/32”

3/8”

1 9/16”

9/16” 1”

www. dynamicwindows. com

Back to Index - 41

S1 GLAZING STOP DETAILS INSWING WINDOW WALL

1 - T FRAME PROFILE

2 - H FRAME PROFILE 3/8”

5/32”

5/32”

9/16”

3/8”

9/16”

9/16”

3/8”

9/16”

13/16”

2 3/8”

1 9/16”

3 - T FRAME WITH SASH 5/32”

9/16”

4 3/8”

3/8”

9/16”

5/32”

3/8”

5/32”

5/32”

13/16”

13/16”

45/64”

17/64”

9/16”

2 3/8”

2 3/8”

www. dynamicwindows. com

Back to Index - 42

S1 GLAZING STOP DETAILS

5/32” 3/8” 5/32”

9/16” 13/16”

2 3/8”

3/8”

9/16”

5

5/32” 3/8”

9/16”

3/8”

9/16”

13/16”

6

2 3/8”

INSWING WINDOW WALL

www. dynamicwindows. com

Back to Index - 43

S1 GLAZING STOP DETAILS INSWING CASEMENT

A-A

5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32”

5/32”

5/32” 5/32”

1 9/16”

5/32”

1 9/16”

1 9/16”

B-B

3/16”

5/32”

5/32”

5/32” 5/32”

1 9/16”

1 9/16”

13/16”

5/32” 5/32”

5/32”

5/32” 13/16”

1 9/16”

1 9/16”

1 9/16”

2 3/8”

2 3/8”

C

D

A

A

B

B

C

www. dynamicwindows. com

D

Back to Index - 44

www. dynamicwindows. com 1 9/16” 5/32” 5/32”

3/16”

13/16”

1 9/16” 5/32” 5/32”

1 9/16” 5/32” 5/32” 5/32”

13/16”

1 9/16” 5/32” 5/32”

3/16”

5/32”

2 3/8” 1 9/16”

1 9/16” 5/32”

1 9/16” 5/32”

INSWING CASEMENT

1 9/16” 5/32”

1 9/16” 5/32”

2 3/8” 1 9/16”

S1 GLAZING STOP DETAILS C-C D-D

Back to Index - 45

S1 GLAZING STOP DETAILS OUTSWING CASEMENT

A-A

5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 1 9/16”

B-B 5

5/32” 1 9/16”

5/32” 13/16”

5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 5/32” 1 9/16” 13/16” 2 3/8”

5/32” 1 9/16”

2 3/8”

C

D

A

A

B

B

C

www. dynamicwindows. com

D

Back to Index - 46

3/16”

2 3/8” 1 916” 5/32”

1 916” 5/32” 5/32”

13/16” 5/32”

1 916” 5/32” 5/32”

1 916” 5/32” 5/32”

3/16”

13/16”

1 916” 5/32” 5/32”

2 3/8” 1 916” 5/32”

1 916” 5/32”

1 916” 5/32”

OUTSWING CASEMENT

1 916” 5/32”

1 916” 5/32”

S1 GLAZING STOP DETAILS C-C D-D

www. dynamicwindows. com

Back to Index - 47

S1 GLAZING STOP DETAILS OUTSWING AWNING

A-A

5/32” 1 9/16”

5/32” 5/32”

5/32” 5/32”

5/32” 5/32”

1 9/16”

1 9/16”

1 9/16”

5/32” 1 9/16”

B-B 3/16”

5/32” 9/16” 3/8” 9/16” 1 9/16”

5/32” 13/16”

5/32” 1 9/16”

3/16”

5/32” 5/32”

5/32”

1 9/16”

1 9/16”

5/32”

5/32”

13/16”

1 9/16”

C

D

A

A

B

B

C

www. dynamicwindows. com

D

Back to Index - 48

www. dynamicwindows. com

1 9/16” 5/32”

1 9/16” 5/32”

2 3/8” 1 9/16” 5/32”

1 9/16” 5/32” 5/32”

13/16” 5/32”

1 9/16” 5/32” 5/32”

1 9/16” 5/32” 5/32”

3/16”

1 9/16” 5/32” 5/32”

2 3/8” 1 9/16” 13/16” 5/32”

1 9/16” 5/32”

1 9/16” 5/32”

S1 GLAZING STOP DETAILS OUTSWING AWNING

C-C D-D

Back to Index - 49

S3 GLAZING STOP DETAILS OUTSWING WINDOW WALL

1

3

1

3

3

3

2

5

7

1

3/8”

9/16”

2

4

1

1 - L FRAME PROFILE

5/32”

9/16”

6

2

5 7

1 - H FRAME PROFILE

2

2

2

7

1

6

4

1

5/32”

3/8”

1 9/16”

9/16” 1”

www. dynamicwindows. com

Back to Index - 50

S3 GLAZING STOP DETAILS OUTSWING WINDOW WALL

2

3 5/32”

9/16”

5/32”

3/8”

3/8”

5/32”

9/16” 13/16”

1 9/16”

9/16”

3/8”

9/16”

2 3/8”

4

5/32”

13/16”

3/8”

9/16”

5/32”

3/8”

5

9/16”

5/32”

13/16”

3/8”

45/64”

5/32”

17/64” 9/16”

2 3/8”

2 3/8”

www. dynamicwindows. com

Back to Index - 51

S3 GLAZING STOP DETAILS

5/32” 3/8” 5/32”

13/16” 13/16”

13/16”

2 3/8”

13/16”

6

5/32” 3/8”

13/16”

9/16”

3/8”

9/16”

7

2 3/8”

OUTSWING WINDOW WALL

www. dynamicwindows. com

Back to Index - 52

S3 GLAZING STOP DETAILS INSWING WINDOW WALL

1

1

2

2

2

2

1

5

4

5 3

1

4

3

6

6

1 - H FRAME PROFILE

9/16”

3/8”

9/16”

6

1

1

1 - L FRAME PROFILE

3/8”

1 9/16”

9/16” 1”

www. dynamicwindows. com

Back to Index - 53

S3 GLAZING STOP DETAILS INSWING WINDOW WALL

1 - T FRAME PROFILE

2

3/8”

5/32”

5/32”

9/16”

3/8”

9/16”

9/16”

3/8”

9/16”

13/16”

2 3/8”

1 9/16”

3 - T FRAME WITH SASH 3/8”

5/32”

9/16”

4

3/8”

9/16”

5/32”

5/32”

13/16”

13/16”

3/8”

5/32”

45/64”

17/64” 9/16”

2 3/8”

2 3/8”

www. dynamicwindows. com

Back to Index - 54

S3 GLAZING STOP DETAILS

5/32” 3/8” 5/32”

9/16” 13/16”

2 3/8”

3/8”

9/16”

5

5/32” 3/8”

9/16”

3/8”

9/16”

13/16”

6

2 3/8”

INSWING WINDOW WALL

www. dynamicwindows. com

Back to Index - 55

L GLAZING STOP DETAILS OUTSWING WINDOW WALL

1

3

1

3

3

3

2

5

7

2

2

7

1

3/8”

9/16”

2

4

1

1 - L FRAME PROFILE

5/23”

9/16”

6

2

5 7

1 - H FRAME PROFILE

1

6

4

2

1

5/23”

3/8”

1 9/16”

9/16” 1”

www. dynamicwindows. com

Back to Index - 56

L GLAZING STOP DETAILS OUTSWING WINDOW WALL

2

5/32”

9/16”

3

5/32”

3/8”

3/8”

13/16”

9/16”

9/16”

5/32”

13/16”

3/8”

9/16”

3/8”

9/16”

2 3/8”

1 9/16”

4

5/32”

5/32”

3/8”

5

9/16”

5/32”

13/16”

3/8”

45/64”

5/32”

17/64”

9/16”

2 3/8”

2 3/8”

www. dynamicwindows. com

Back to Index - 57

L GLAZING STOP DETAILS OUTSWING WINDOW WALL

5/32” 3/8”

9/16”

5/32”

9/16”

3/8”

2 3/8”

13/16”

6

5/32” 3/8”

9/16” 13/16”

2 3/8”

3/8”

9/16”

7

www. dynamicwindows. com

Back to Index - 58

L GLAZING STOP DETAILS INSWING WINDOW WALL

1

1

2

2

2

2

1

5

4

5 3

1

4

3

6

6

1 - H FRAME PROFILE

6

1

1 - L FRAME PROFILE

5/32”

9/16”

3/8”

9/16”

1

5/32”

3/8”

1 9/16”

9/16” 1”

www. dynamicwindows. com

Back to Index - 59

L GLAZING STOP DETAILS INSWING WINDOW WALL

2 - H FRAME PROFILE

1 - T FRAME PROFILE

3/8”

5/32”

5/32”

9/16”

3/8”

9/16”

9/16”

3/8”

1 9/16”

9/16”

13/16”

2 3/8”

3 - T FRAME WITH SASH 5/32”

9/16”

4 3/8”

3/8”

9/16”

5/32”

5/32”

13/16”

13/16”

3/8”

45/64”

5/32”

17/64”

9/16”

2 3/8”

2 3/8”

www. dynamicwindows. com

Back to Index - 60

L GLAZING STOP DETAILS

5/32” 3/8” 5/32”

9/16” 13/16”

2 3/8”

3/8”

9/16”

5

5/32” 3/8”

9/16”

3/8”

9/16”

13/16”

6

2 3/8”

INSWING WINDOW WALL

www. dynamicwindows. com

Back to Index - 61

L GLAZING STOP DETAILS INSWING CASEMENT

A-A

5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 5/32” 1 9/16”

5/32” 1 9/16”

B-B

3/16”

5/32”

1 9/16”

5/32”

1 9/16”

5/32” 5/32” 13/16”

5/32” 45/64” 5/32” 13/16” 17/64” 9/16” 2 3/8”

5/32” 13/16”

C

5/32”

1 9/16” 2 3/8”

1 9/16”

D

A

A

B

B

C

www. dynamicwindows. com

D

Back to Index - 62

1 9/16” 5/32”

1 9/16” 5/32”

www. dynamicwindows. com 1 9/16” 5/32” 5/32”

3/16”

5/32”

2 3/8” 1 9/16” 13/16”

1 9/16” 5/32” 5/32”

1 9/16” 5/32” 5/32” 13/16” 5/32”

1 9/16” 5/32” 5/32”

3/16”

2 3/8” 1 9/16” 5/32”

1 9/16” 5/32”

1 9/16” 5/32”

L GLAZING STOP DETAILS INSWING CASEMENT

C-C D-D

Back to Index - 63

TYPICAL INSTALLATION DETAILS

1”

3/16”

1”

2 3/16”

1”

3/8”

9/16” 3/8”

1 9/16”

9/16”

9/16”

3/6

3/6

4”

4”

Direct Glazed Mullion

9/16” x 9/16”

3/64”

3/64”

9/16” 3/8”

3/8”

9/16”

9/16”

1”

1 9/16”

Direct Glazed Corner Mulling Options

  DISCLAIMER:  THESE INSTRUCTIONS AND METHODS MAY NOT BE APPROPRIATE FOR A SPECIFIC INSTALLATION DUE TO DESIGN OF THE  BUILDING, CONSTRUCTION METHODS USED,  BUILDING CONDITIONS OR SITE CONDITIONS, ANY OF WHICH MAY REQUIRE DIFFERENT METHODS OR PROCEDURES. THE ARCHITECT, BUILDING ENVELOPE SPECIALIST  OR INSTALLATION CONTRACTOR IS RESPONSIBLE FOR DETERMINING THE INSTALLATION METHOD AND PROCEDURE FOR PROJECT SPECIFIC INSTALLATIONS. THESE  DRAWINGS ARE NOT TO BE USED FOR CONSTRUCTION PURPOSES. 

www. dynamicwindows. com

Back to Index - 64

TYPICAL INSTALLATION DETAILS

  DISCLAIMER:  THESE INSTRUCTIONS AND METHODS MAY NOT BE APPROPRIATE FOR A SPECIFIC INSTALLATION DUE TO DESIGN OF THE  BUILDING, CONSTRUCTION METHODS USED,  BUILDING CONDITIONS OR SITE CONDITIONS, ANY OF WHICH MAY REQUIRE DIFFERENT METHODS OR PROCEDURES. THE ARCHITECT, BUILDING ENVELOPE SPECIALIST  OR INSTALLATION CONTRACTOR IS RESPONSIBLE FOR DETERMINING THE INSTALLATION METHOD AND PROCEDURE FOR PROJECT SPECIFIC INSTALLATIONS. THESE  DRAWINGS ARE NOT TO BE USED FOR CONSTRUCTION PURPOSES. 

www. dynamicwindows. com

Back to Index - 65

TYPICAL INSTALLATION DETAILS

  DISCLAIMER:  THESE INSTRUCTIONS AND METHODS MAY NOT BE APPROPRIATE FOR A SPECIFIC INSTALLATION DUE TO DESIGN OF THE  BUILDING, CONSTRUCTION METHODS USED,  BUILDING CONDITIONS OR SITE CONDITIONS, ANY OF WHICH MAY REQUIRE DIFFERENT METHODS OR PROCEDURES. THE ARCHITECT, BUILDING ENVELOPE SPECIALIST  OR INSTALLATION CONTRACTOR IS RESPONSIBLE FOR DETERMINING THE INSTALLATION METHOD AND PROCEDURE FOR PROJECT SPECIFIC INSTALLATIONS. THESE  DRAWINGS ARE NOT TO BE USED FOR CONSTRUCTION PURPOSES. 

www. dynamicwindows. com

Back to Index - 66

TYPICAL INSTALLATION DETAILS

  DISCLAIMER:  THESE INSTRUCTIONS AND METHODS MAY NOT BE APPROPRIATE FOR A SPECIFIC INSTALLATION DUE TO DESIGN OF THE  BUILDING, CONSTRUCTION METHODS USED,  BUILDING CONDITIONS OR SITE CONDITIONS, ANY OF WHICH MAY REQUIRE DIFFERENT METHODS OR PROCEDURES. THE ARCHITECT, BUILDING ENVELOPE SPECIALIST  OR INSTALLATION CONTRACTOR IS RESPONSIBLE FOR DETERMINING THE INSTALLATION METHOD AND PROCEDURE FOR PROJECT SPECIFIC INSTALLATIONS. THESE  DRAWINGS ARE NOT TO BE USED FOR CONSTRUCTION PURPOSES. 

www. dynamicwindows. com

Back to Index - 67

TYPICAL INSTALLATION DETAILS

1 3/16” x 1 3/16”

  DISCLAIMER:  THESE INSTRUCTIONS AND METHODS MAY NOT BE APPROPRIATE FOR A SPECIFIC INSTALLATION DUE TO DESIGN OF THE  BUILDING, CONSTRUCTION METHODS USED,  BUILDING CONDITIONS OR SITE CONDITIONS, ANY OF WHICH MAY REQUIRE DIFFERENT METHODS OR PROCEDURES. THE ARCHITECT, BUILDING ENVELOPE SPECIALIST  OR INSTALLATION CONTRACTOR IS RESPONSIBLE FOR DETERMINING THE INSTALLATION METHOD AND PROCEDURE FOR PROJECT SPECIFIC INSTALLATIONS. THESE  DRAWINGS ARE NOT TO BE USED FOR CONSTRUCTION PURPOSES. 

www. dynamicwindows. com

Back to Index - 68

®

Dynamic Architectural Windows & Doors 30440 Progressive Way Abbotsford, BC Canada V2T 6W3 Toll Free 1.800.661.8111 or email [email protected] Fax (604) 864.6072 www.dynamicwindows.com

© Copyright 2012 Dynamic Architectural Windows & Doors. All rights reserved.