STALLION ENERGY'S API Sec. 6 Bentonite is pure sodium based Bentonite,
specially treated to meet API 13A Sec. 6 specification. • It mixes to a minimum 95
...
BENTONITE FOR FOUNDRY MICROGEL
STALLION ENERGY'S MICROGEL BENTONITE POWDER is Sodium base Bentonite powder, originated from Kutch District of Gujarat (The best Bentonites available in India) It is mined and processed specially for foundry applications. MICROGEL BENTONITE POWDER is used as foundry green sand binder for all kind of mould compaction methods. The high Montmorillonite content of MICROGEL BENTONITE POWDER gives high swelling value with excellent thermal stability. Due to high Montmorillonite content the addition of Bentonite gets reduced and always maintains good active clay level. To the foundry man this means good compaction and better thermal stability, good clean knockout and good permeability. Better Thermeability is obtained with generation of lesser dead clay. Typical performance of MICROGEL BENTONITE POWDER when tested as per BIS Method.
Gelling Time (10%) Instantaneous MB Value (mg /gm of Bentonite) (As Per API 420Min. Method) Liquid Limit 550Min. Green Compressive Strength (10:4) 0.85 Kg/Cm2Min.* * GCS given is typical value which is dependent on Green sand and shapes. Packing : 50 KG New HDPE Bags and Sling bags option is available. Environment :STALLION ENERGY'S MICROGEL BENTONITE POWDER does not contain any fermentable product and is environmentally acceptable.
SPECIFICATION OF BENTONITE POWDER OCMA DFCP-4
OCMA DFCP —4 Bentonite is pure sodium based Bentonite specially treated to meet OCMA DFCP —4 specifications. It is ideal for Oil well drilling, piling and civil engineering 'application. It acts as a viscosifier and highly effective in fresh water. Typical performance of OCMA DFCP -4 Bentonite when tested as per OCMA testing method. Sr. No. Properties OCMA DFCP-4 Requirement 1. Yield(m3/ Ton) 16 Min. 2.
API Filtrate loss(ml)
15 Max.
3.
Moisture %
15% Max.
4.
Dry Screen Analysis on 100 mesh(Passing)
98 % Min.
5.
Residue greater than 75 micron(200 mesh) wet analusis
2.5 % Max.
Packing: 1 Ton Jumbo Bags /50kgs HDPE Bags and Sling bags option is available. Environment OCMA DFCP -4 Bentonite does not contain any fermentable product and is environmentally acceptable.
API 13A SECTION 6 BENTONITE POWDER
STALLION ENERGY'S API Sec. 6 Bentonite is pure sodium based Bentonite, specially treated to meet API 13A Sec. 6 specification. It mixes to a minimum 95 bbls/ton yield ideal for piling and civil engineering application. It acts as a viscosifier and highly effective in fresh water. Typical performance of STALLION ENERGY'S API 13A Sec. 6 Bentonite when tested as per API testing method. PROPERTIES API 13 Section 6 Requirement Viscometer Dial reading at 600rpm 30min. Yield point/plastic viscosity ratio 6max. Filtrate volume(in cc) 16max. Moisture% 13%Max. Residue greater than 75 micron 2.5% Max. (200 Mesh) wet analysis Packing 50kgs HDPE Bags 1000kgs Jumbo Bags and Sling bags option is available. Environment STALLION ENERGY'S API Bentonite does not contain any fermentable product and is environmentally acceptable.
API 13A SECTION 9 (ISO13500:1998(E)) BENTONITE POWDER
STALLION ENERGY'S API Bentonite is pure sodium based Bentonite. It is processed from selected ore with high montmorillonite content. STALLION ENERGY'S API Bentonite contains more than 85 °A) smectite, the active clay content as determined by colloid and x-ray diffraction. STALLION ENERGY'S API Bentonite is used as a viscosifier and Fluid Loss reducing agent. It is most effective in the fresh water. Prehydrated STALLION ENERGY’S API Bentonite can be used in brackish and salt water. Typical performance of STALLIONENERGY'S API Bentonite when tested as per API 13A section 9 is as follows: PROPERTIES API 13Section 9 Viscometer Dial reading at 600 rpm 30 min. Yield point / plastic viscosity ratio 3 Max. Filtrate volume (in cc) 15 MI max. Residue greater than 75 micron 4.0 wt % max. (200 mesh) wet analysis Packing 50 kgs HDPE Bags 1000 kgs Jumbo Bags and Sling bags option is available. Environment STALLION ENERGY'S API Bentonite does not contain any fermentable product and is environmentally acceptable.
HIGH YIELD BENTONITE POWDER
STALLION ENERGY'S "HIGH YIELD" Bentonite is pure sodium based Bentonite. It is processed from selected ore with high Montmorillonite content, the active ingredient of Bentonite.
STALLION ENERGY'S"HIGH YIELD "Bentonite
contains more than 90 % smectite, the active clay content aS determined by colloid and x-ray diffraction. Important characteristics of STALLION ENERGY'S "HIGH YIELD" Bentonite are o Large Surface Area
Good plasticity and lubricity
o filter loss Low o Shear & High Compressive Strength High Barrel Yield
High Swelling & Thixotropic Properties Low compressibility
This High yield Bentonite is widely used in Soil Sealant for Impermeable Barriers, Diaphragm walls and Horizontal tunnel Drilling.
Typical pe rformance of STALLION ENERGY'S High Yield Bentonite is as follows: PHYS IC A L PRO P ERT I ES
