catalog

™

2013

cyclevisions.com

cyclevisions.com • 619.295.7800

TA B L E O F C O N T E N T S

PERFORMA N C E D I V I SI ON

ELEC TRI C A L & LI G HTI NG

LI C ENSE PLATE S

Afterburner exhaust end caps with lights.................... 24 Afterburner exhaust Cones.......................................... 24 Patent Pending............................................................ 24 Lucifer’s lights............................................................ 25 Bag Lites™.................................................................. 26 Illumabezel™............................................................... 27 Electra Light Tech Trim Patent Pending....................... 28 Delvira B-kini Jacket.................................................... 29 Little Lite brackets...................................................... 29 Headlight Rubber Isolator Mount ................................ 30 Replacement Headlight Socket.................................... 30 Tail light wire harness adapter.................................... 30 Custom Chopper Wire Harness . .................................. 30 ignition switch w/ on/off start..................................... 30 The Flasher . ............................................................... 31 6-8 PIN connector........................................................ 31 Load Equalizer............................................................. 31 Red Bulbs.................................................................... 31

Slick Signals License Plate Frame ............................... 40 Beveled Blind Hole License Plate Frame . ................... 41 Eliminator™ . .............................................................. 42 Eliminator™ II Tail Light Assembly ............................ 44 Recessed turn signal .................................................. 45 cover plates & bolts.................................................... 45 Eliminator™ License Bracket....................................... 45 Fiberglass Recessed pockets....................................... 45 Pyramid Cover............................................................. 45 “In-close” license plate holder.................................... 46

Performance Division...........................................4-5

WA R RA N T Y

A description of our warranty.................................5

ACC ESSOR I ES

CycleVisions™ was established in 1996 by Randy Aron. A true biker, Randy built his first bike in 1969 and has always maintained the highest standards for CycleVisions™, whether it be product or service. In this catalog you’ll find innovative (many are patented), custom enhancements that add functionality or form (or both) to your bike. Our goal is to improve your experience on the road. Have questions? Check out our web site or give us a call and talk to an expert, not a machine. See you on the road.

2

Cycle Skyns™ tank, fender & saddlebag covers.............. 6 Motor Kapz.................................................................... 8 “The Correct” Rear Wheel Pulley Spacers...................... 8 “Cover-Up”.................................................................... 8 Plus 2 Handlebars.......................................................... 9 Military Sticker Plate . ................................................ 11 Pyramid Cover............................................................. 12 InjectiCovers®............................................................. 13 “The Squealers” Brake Pads........................................ 13

BAG MOU N TI N G Front & Rear Brake Pads ............................................. 13 Bagger Tail™ for Softails®........................................... 14 Patent #7,278,560.B2.................................................. 14 Bagger Tail™ Filler Panels........................................... 15 Baggertail bag Rails & Bag Guards.............................. 16 Rear Fenders for ........................................................ 17 Extended Saddlebags for Softails................................ 17 Bail Head Fastener W/Washers (2) .............................. 17 Bail Head Fastener Receptacles (2) ............................. 17 Rear Fender for FLH..................................................... 18 Extended Saddlebags.................................................. 18 Bag draggers............................................................... 19 FLT® Filler Panels........................................................ 19 Patent #7,278,560.B2.................................................. 20 Dyna Bagger tail™ Saddlebags.................................... 20 Dyna Bagger tail™ Mount for Dyna.............................. 20 Bagster Saddlebag Mount for sportster®..................... 21 Patent #7,278,560.B2.................................................. 21 BareBacks™ for heritage softail®, heritage softail Springer®, FatBoy®, Softail Standard® & Dyna®.......... 22 BareBacks™ Aluminum Caps........................................ 23 Bag straps................................................................... 23

EX TENSI ONS Chrome Shift Rod Extension . ...................................... 32 Forward Control Extensions . ...................................... 32 “Go-Forward” Floorboard Extensions ......................... 33 Forward Control Extensions for .................................. 34 Victory cruiser & bagger models.................................. 34 Handlebar adapter for Victory..................................... 35

FA I RI NG MOU NT S Dyna Fairing Mounting Kit........................................... 36 Softail Fairing Mounting Kit......................................... 37 Batwing fairing bracket............................................... 38 Cyclevisions Apparel................................................... 39

M OFLOW Moflow™ air cleaners.................................................. 48 MoFlow Filter........................................................ 48 MoFlow Breather Bolts.......................................... 48

ROA D ROD / V- R O D Fat Rod Fenders........................................................... 50 Road-Rod™ Fairing Mount Kit ..................................... 51 Road-Rod™ Saddlebag Mounting Kit ........................... 52 Road-Rod™ Saddlebags............................................... 52 Road-Rod™ Rear Fender Extension.............................. 53 Made of gel coated Fiberglass. Parts ship unpainted. . 53 Floorboard Mounting Kit ............................................. 54

SI SSY B A R S Road-Rod™ Rear FootPeg Relocation Kit . ................... 54 Road Rod™ Pack Rack Mount........................................ 55 Attitude Stick Sissy Bars............................................. 56 Multitude Sissy Bars................................................... 60 Multitude toppers........................................................ 61 Deuce® Sissy Bar Side Plates...................................... 61

3


PERFORMANCE

Orders over ee $100 ship fr e in th U.S. continental

Our performance expert, “Dr.” Jim, owns bragging rights for building some of the fastest bikes in southern California. He does all the bore and hone, port and polish, valve work, balancing, and custom race engine work himself. Don’t trust your bike to anyone else. Let the experts at CycleVisionsSM maximize your bike’s performance. We offer a variety of packages designed specifically to improve power, performance, and fuel economy, off the line and on the road. We offer:

n S tate-of-the-art dyno-jet with tuning link. n Cylinder Head Clean Up With Valve Job/Surface

n Heads Full Port And Polish With Larger Valves, Springs, Manuel Comp. Releases And Surface

Warranty

n Custom Hand-Ported Throttle Body

n Cylinder Head Combustion Chamber Cutting

n Performance 3-Step Bore And Hone

n Case Boring

n Crank True And Tig

n Cam Clearancing

CycleVisionsSM obligation is limited to one (1) year from date of purchase to repair or replacement of the defective item (s). Chrome, polished, powder-coated, anodized finishes, or electrical parts are limited to thirty (30) day from date of purchase.

n HD Electric Comp. Machining

n Timken Conversion And Set Up

n Custom Race Engine Building And Tuning

mpliant

CARB & EPA co

This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from their original design. The consumer will be responsible for removing from the vehicle any defective item(s), transportation costs prepaid and for reinstallation upon return by Cycle Visions. The loss of use of the product, loss of time, inconvenience, commercial loss or consequential damages is not covered. Cycle Visions reserves the right to change the design of any product without assuming any obligation to modify any product previously manufactured. Warranty returns of CycleVisionsSM products are few because of our high quality products. Carefully inspect all parts...if you find that your parts arrived in damaged conditional all original packaging material (box and other materials) must be saved to make a proper damage claim within seven (7) days. You must be able to present the damaged boxes and materials to the freight carrier to verify your claim. The user shall assume all legal, personal, injury risk and liability and all other obligations, duties and risks associated therewith.

4

5


ACCESSORIES

CV206

CV204

Heritage or Dressers Fender Cover

63.19

CV205

FatBoy Fender Cover

60.99

CV206

Softail Custom/Sporty Fender Cover

50.00

CV208

2 Piece Saddlebag Set

130.89

CV207

5 Piece Mechanic Set

244.30

Kit includes front fender covers for Sportster®, FatBoy® and Road King®, and tank covers for Sportster® and 5 gallon tank.

CV202

CV201

CYCLE SKYNS™ TANK, FENDER & SADDLEBAG COVERS Protect your paint while working or storing your bike. These high quality neoprene covers are form-fitted to your tank or fender size. The Saddle bag cover is only for fiberglass bags. Made from 4mil Neoprene wet suit material with or without pockets on the tanks. Perfect for storing bolts from h-bars while assembling. CV200

5.2 FatBoy Tank Cover

71.99

CV201

3.2 Sporty Tank Cover

60.99

CV202

5.2 FatBoy Tank Cover with pockets

85.17

CV203

3.2 Sporty Tank Cover with pockets

71.99

CV203

CV208

6

7


ACCESSORIES

PLUS 2 HANDLEBARS

“THE CORRECT” REAR WHEEL PULLEY SPACERS

We duplicated the stock Road Glide® handlebars and added a 2” rise for a more comfortable ride. Works with all stock cables, brake line and wiring including Fly By Wire throttle 08-up FLH. Pre-drilled knurled and dimpled. Available in Chrome or Black powder coated finish.

Made from 6061 T6 aluminum. Machine finished. CV2002 allows you to use late model 1-1/8 pulley on early style wheel. CV2003, CV2004 & CV2005 spacer allows use of any combination of early or late style wheel, pulley, or sprocket combination. Made to work on stock Harley Davidson® aluminum hubs with a .190” flange height. CV2000

“The Correct” Rear Wheel Pulley Spacers

00-up Wheels

.25” thick

54.99

CV2001

“The Correct” Rear Wheel Pulley Spacer

84-99 Wheels

.25” thick

54.99

CV2002

“The Correct” Rear Wheel Pulley/Sprocket/Adapter

84-99 Wheels

.075 thick

54.99

CV2003


84-up Wheels

.375” thick 62.99

CV2004


84-up Wheels

.5” thick

CV2005


84-up Wheels

.625” thick 74.99

CV2008

“The Correct” Rear Wheel Pulley Spacer

00-up Wheels

.100 thick

CV5002

Plus 2’s Handlebars

CV5002B Plus 2’s Handlebars

Chrome

119.99

Black

119.99

CV5002

62.99

54.99

MOTOR KAPZ Motor Kapz are designed to cover the large motor mount bolts on the front of all Softail Twin Cam® motors. Machined from T-6 billet aluminum and then chrome plated for a beautiful finished look. CV3000

Motor Kapz (set of 2 caps)

00-up FXST/FLST

CV5002B

39.99

CV402

adds a 2” rise for a more comfortable ride.

“COVER-UP” This chrome billet cover allows the use of T-bars when running a Nacel headlight assembly on 84-up Softails®. Made from 1/8” T6 billet aluminum polished and chromed plated.

8

CV402

“Cover-up” Handle bar cover

1-1/4” T-bar

69.99

CV403

“Cover-up” Handle bar cover

1-1/2” T-bar

69.99

9


ACCESSORIES

Note: Will not work with Brembo brakes

MILITARY STICKER PLATE Made of 16-gauge steel. Has a surface area of 2”x6” for military base sticker. Comes in two versions. CV420 mounts on front forks, using the two brake caliper bolts on 2000 & up Big Twins® and Sportsters®. CV422 mounts on frame down tubes.

Orders over ee $100 ship fr in the U.S. continental

CV420C

Military Sticker Plate 00-up Big Twin/Sportster (mnt Lt Brake Caliper)

Chrome

29.99

CV420B

Military Sticker Plate 00-up Big Twin/Sportster (mnt Lt Brake Caliper)

Black

29.99

CV422C

Military Sticker Plate EVO Style/Big Twin (Fits down tube)

Chrome

29.99

CV422B

Military Sticker Plate EVO Style/Big Twin (Fits down tube)

Black

29.99

CV420C

10

CV420B

CV422B

CV422B

11


ACCESSORIES

The perfect to complement , MoFlow page 48-49

PYRAMID COVER The CycleVisionsSM Pyramid is designed to cover the three holes left when relocating stock license plates above the stock tail light, or the Eliminator™ tail light (see page 42-43) on your rear fender. Fits all FL® Softails®, 99-03 XLs®, 99-03 FXD® Dynas®. Polished and chrome plated aluminum construction.

CV4811

CV4811

Pyramid Cover

CV4811B Pyramid Cover

Chrome

29.99

Black

29.99

CV501

CV4811B Injecticover installed

INJECTICOVERS® Made from 16-gauge steel polished and chrome plated. This Injecticover works with CycleVisionsSM MoFlow, Screamin Eagle®—Arlen Ness Big Sucker air cleaner assemblies. Equipped with CV or Delfi fuel injection. CV501

all Twin Cam with CV or Delfi

59.99

“THE SQUEALERS” FRONT & REAR BRAKE PADS

CV700

Stay safe with sound—a unique squealing sound lets you know when it’s time to replace your pads. Prevents damage that can occur to rotors when pads are over worn. Made from completely organic kevlar aramid fibers for very low-abrasion. The Squealers provide excellent stopping power without noise and rotor galling, even on polished rotors. Fingertip control and strong, predictable brake response.

The perfect to complement r to a The Elimin 3 -4 2 4 on pages

CV701

12

Fuel Injector Cover

CV700

“The Squealers” Front or Rear Brake Pads 00-08 all models, except 03-up XL. Replaces OEM parts # 44082-00c, 00dd, 00, 00a, 44442-00a, 46721-06

39.99

CV701

“The Squealers” Rear Brake Pads 84-99 all models. Replaces OEM parts #44209-87b, 87c, 44213-87

39.99

13


BAG MOUNTING

BAGGER TAIL™ FILLER PANELS Fits all Softail® FLST® models, when used with Bagger Tail brackets. Made from 16-gauge cold roll steel. Comes in raw and chrome (C) finish. Filler panels to be used with Bagger Tails CV7200A, CV7201, CV7205, and CV7206. CV7220

More Baglite options n o page 26

Bagger Tail Filler Panels

Softails, except Deuce Hard Bags

195.99

CV7220C Bagger Tail Filler Panels

Softails, except Deuce Hard Bags

249.99

CV7225

08-up Softails, except Deuce Hard Bags

195.99


08-up Softails, except Deuce Hard Bags

249.99

CV7230

Classic Style Leather Bags

195.99


Classic Style Leather Bags

249.99

CV7235

08-up Classic Style Leather Bags

195.99

08-up Classic Style Leather Bags

249.99





Chrome

Chrome

Chrome

Chrome

Patent #7,278,560.B2 Made of high quality steel and available in black powder coated finish or chrome finish, this patented product keeps your bags, and what they’re holding, safe, secure and steady.

BAGGER TAIL™ FOR SOFTAILS® Allows the installation of FLH® style Harley Davidson® hard or leather bags onto your Softail®. Made of high-quality steel. Black powder coated finish. Fits all Softail® models, except Deuce®. Excludes fiberglass bags. Exhaust must be lower than rear axle. CV7200A Bagger Tail Softail Bag Mount

84-07 FLSTC, FLSTF, FLSTN & FLSTS

Black

299.99

CV7201

Bagger Tail Softail Bag Mount

08 & up FLSTC, FLSTN & FLSTS

Black

299.99

CV7205


84-07 FLSTC, FLSTN & FLSTS

Chrome

399.99

CV7206


08 & up FLSTC, FLSTN & FLSTS

Chrome

399.99

CV7210


200 Series tires-SE & 07-up FatBoys

Black

299.99

CV7215


200 Series tires-SE & 07-up FatBoys

Chrome

399.99

Note: Bags may interfere with some wide seats.

14

15


BAG MOUNTING

REAR FENDERS FOR EXTENDED SADDLEBAGS FOR SOFTAILS

CV7263

Note: CV7263 must be used with CycleVisionsSM Bagger-Tail Saddlebag Mount (CV7200A, CV7205, CV7201, CV7206), Extended Saddlebags (CV7260 & CV7261).

This complete rear fender (not a cover) comes complete with filler panels and recessed pocket for CycleVisionsSM Eliminator™ (CV4819) Tail light. Will work with detachable sissy bar. Fits 00-up FL Softail® models, except 07-up FatBoys® with 200 tire. Fiberglass construction with gel coating. CV7263

Bagger-Tail Extended Rear Fender 00-up FL Softails, except 07-up FatBoys w/200 tire

449.99

CV7263 installed

Check out d our Extende s g a b le d d Sa next page

BAGGERTAIL BAG RAILS & BAG GUARDS Protect your bags. Our Bag Guards are made of 7/8” steel tubing and the rails are 3/4” steel tubing and work on CycleVisionsSM Baggertail (see page 14) and Harley Davidson® FLH® hard bags on FLST®. Available in chrome or black. CV7241

Bagger-Tail Bag Guards

08-up FLST

Chrome

199.99

CV7241B Bagger-Tail Bag Guards

08-up FLST

Black

169.99

CV7242

Bagger-Tail Bag Rails

00-up FLST

Chrome

199.99

CV7242B Bagger-Tail Bag Rails

00-up FLST

Black

169.99

CV7244

Bagger-Tail Bag Guards

00-07 FLST

Chrome

199.99

CV7244B Bagger-Tail Bag Guards

00-07 FLST

Black

169.99

CV7242B CV7241B

Check out Baggertail on page 14

BAIL HEAD FASTENER W/WASHERS (2) CV7272

Bail Head Fastener w/ washers (2)

16.99

BAIL HEAD FASTENER RECEPTACLES (2) CV7273

CV7272

16

Bail Head Fastener Receptacles

9.99

CV7273

17


BAG MOUNTING

CV7265

REAR FENDER FOR FLH Rear fender is designed to work with CycleVisionsSM Extended Saddlebags. Made of fiberglass with a recess for CycleVisionsSM Eliminator™ Taillight (P/N CV4819). Fits 97-08 FLH® models. Fiberglass construction with gel coating and available with or without pocket. CV7262

Rear Fender Cover for Extended bags 97-08 FLH models w/no cut-outs

CV7264

Rear Fender Cover for Extended bags fits 97-08 FLH models w/ cut-outs

399.99

CV7265

FLH Extended Rear Fender Cover w/ right side cut-out only

399.99

CV7268

FLH Extended Rear Fender Cover w/ cut-outs. No pocket

399.99

CV7269

FLH Extended Rear Fender Cover w/ right side cut-out only. No pocket

399.99

CV7274

FLH Extended Rear Fender Cover w/ no cut-outs. No pocket

399.99

BAG DRAGGERS Made of polished stainless steel, Bag Draggers mount to the bottom of extended bags and prevents paint damage when cornering.

399.99

CV7240

CV7262

Bag Draggers

79.99

without pocket

Check out d our extende s g a b le sadd page on previous

CV7264 installed

with pocket

FLT® FILLER PANELS Fits all FLT® Baggers (97-08) with hard bags. Made of fiberglass with a gel coat finish. Custom installation. Minor frame modifications are necessary. Does not work with detachable accessories. Does not work on Electra Glide. CV7250

FLT Filler Panels

98-08 FLT Baggers w/hard bags

249.99

EXTENDED SADDLEBAGS Stretch ‘em out. Our new extended saddlebags fit all models with saddlebag systems. They are made of fiberglass with a gel coat finish. Bags are bottoms only, and accept stock HD lids and hardware. CV7260

Extended Saddlebag

LH w/cutouts

399.99

CV7261

Extended Saddlebag

RH w/cutouts

399.99

CV7266

Extended Saddlebag

LH No cut-out

399.99

CV7267

Extended Saddlebag

RH No cut-out

399.99

CV7250 Installed

CV7266

18

CV7261

19


BAG MOUNTING

Baggertail is , r Dyna available fo 21), and g (p Bagster 14) Softail (pg.

BAGSTER SADDLEBAG MOUNT FOR SPORTSTER® Made of high quality steel. Available in Black powder coated finish or chrome., Allows the installation of 98-up Harley Davidson® FLH® hard bags onto your Sportster®. Fits on 04-07 Sportsters®, and 08-up 883, 883 Custom, 883R, 1200 Custom, 1200 Roadster®, 1200 Low and 1200 Super Low Sportsters®. CV7500

Bagster XL Saddlebag Mounts

04-up

Black

299.99

CV7505

Bagster XL Saddlebag Mounts

04-up

Chrome

399.99

Patent #7,278,560.B2

Patent #7,278,560.B2 DYNA BAGGER TAIL™ MOUNT FOR DYNA Allows for the installation of FLT-style saddlebags and works with or without docking hardware for detachable sissy bars. Available in chrome and black. Fits 00-up Dyna® models, except 09-up Street Bob®, 08-up Wide Glide® & Fat Bob®. FLT® style lower saddlebags not included, must be purchased separately (CycleVisionsSM P/N CV7410 & CV7411) CycleVisionsSM bags have an indentation to clear shocks. CV7400

Dyna Bagger-Tail Mount (06-up Dyna models, except 09-up Street Bob, 08-up W/G & Fat Bob)

Chrome

399.99

CV7400B Dyna Bagger-Tail Mount (06-up Dyna models, except 09-up Street Bob, 08-up W/G & Fat Bob)

Black

299.99

CV7405

Chrome

399.99

Black

299.99

Dyna Bagger-Tail Mount (00-05 Dyna models)

CV7405B Dyna Bagger-Tail Mount (00-05 Dyna models)

CV7500 installed

DYNA BAGGER TAIL™ SADDLEBAGS Made of fiberglass with a gel coast finish, these bags work with Dyna® Baggertail mount (P/N CV7400, CV7400B & CV7405 & CV7405B for 00-05). Bottoms ONLY, these bags take stock HD lids and hardware.

20

CV7410

Dyna Bagger-Tail Saddlebag

Right Side 399.99

CV7411

Dyna Bagger-Tail Saddlebag

Left Side

399.99

21


BAG MOUNTING

BAREBACKS™ ALUMINUM CAPS Never be uncovered again. Set of 4 Chrome Caps are custom made to fit bolts when Saddlebags are off your bike. Specify make and model when ordering. Fits all Barebacks™. Bareback Aluminum Caps

Chrome 29.99

CV135B

Bareback Aluminum Caps

Black

29.99

BAG STRAPS

BAREBACKS™ FOR HERITAGE SOFTAIL®, HERITAGE SOFTAIL SPRINGER®, FATBOY®, SOFTAIL STANDARD® & DYNA®

Attach to a bag in conjunction with Barebacks quick release system. Made from ultra strong nylon straps.

Our NEW patented system works flawlessly with OEM saddlebags and can be used with or without docking hardware for sissy bars. BareBacks™ are constructed from the highest quality 303 stainless steel. Bags can be removed in about 3 seconds! Chromed aluminum caps can be snapped on the strut for a clean look. Specify make and model when ordering. Not available for XL or Cross Bones models.

CV135B

CV3492

BareBack Bag Straps

Softails 39.99

CV3494

BareBack Bag Straps

Dyna

39.99

Spring loaded locks

Patent #US6,293,450-B1

22

CV135

CV135

CV127

91-05 FXD/FXDWG & 91-02 FLSTF/FXST/FXSTS

149.99

CV128

91-05 FXD/FXDWG & 91-02 FLSTF/FXST/FXSTS w/detachable sissy bar

149.99

CV136

3-up FLSTF/FXST & FXSTS & FLSTN

149.99

CV137

03-up FLSTF/FXST & FXSTS & FLSTN w/detachable sissy bar

149.99

CV138

03-up FLSTC & FLSTS

149.99

CV139

03-up FLSTC & FLSTS w/detachable sissy bar

149.99

CV140

84-99 FLSTC

149.99

CV141

84-99 FLSTC w/detachable sissy bar

149.99

CV142

97-02 FLSTS & 00-02 FLSTC

149.99

CV143

97-02 FLSTS & 00-02 FLSTC w/detachable sissy bar

149.99

CV144

06-up Dyna

149.99

CV145

06-up Dyna w/detachable sissy bar

149.99

23


ELECTRICAL & LIGHTING

AFTERBURNER EXHAUST END CAPS WITH LIGHTS Add lights to your pipes. Simply plug into OEM wiring harness). Has run, turn and brake controller built in (controls these lights only). Turn signal illuminates Amber. Made from aluminum, with a chrome finish or black powder coated, our lights are LED and heat-tested to 500 degrees Fahrenheit. CV4530

3-1/2” Afterburner Exhaust Tips 8-pin T/L plug

Chrome

299.99

CV4530B 3-1/2” Afterburner Exhaust Tips 8-pin T/L plug

Black

299.99

CV4531

Chrome

299.99

CV4531B 4” Afterburner Exhaust Tips 8-pin T/L plug

Black

299.99

CV4532

Chrome

299.99

CV4532B 3-1/2” Afterburner Exhaust Tips fits 10-up S/G & R/G customs w/ Molex connector

Black

299.99

CV4533

Chrome

299.99

Black

299.99

Chrome

149.99

CV4534b 2” Afterburner Cone for 3-1/2” Afterburner

Black

149.99

CV4535

Chrome

149.99

CV4535b 5” Afterburner Cone for 3-1/2” Afterburner

Black

149.99

CV4536

Chrome

149.99

CV4536b 2” Afterburner Cone for 4” Afterburner

Black

149.99

CV4537

Chrome

149.99

Black

149.99

4” Afterburner Exhaust Tips 8-pin T/L plug

3-1/2” Afterburner Exhaust Tips fits 10-up S/G & R/G customs w/ Molex connector

4” Afterburner Exhaust Tips fits 10-up S/G & R/G customs w/Molex connector

CV4533B 4” Afterburner Exhaust Tips fits 10-up S/G & R/G customs w/Molex connector

AFTERBURNER EXHAUST CONES Extends the pipe look of the Afterburner Exhaust Tips. CV4534

2” Afterburner Cone for 3-1/2” Afterburner

5” Afterburner Cone for 3-1/2” Afterburner

2” Afterburner Cone for 4” Afterburner

5” Afterburner Cone for 4” Afterburner

CV4537b 5” Afterburner Cone for 4” Afterburner

and Use several n ow create your . gn custom desi

Patent Pending

smaller than a nickel CV4545

LUCIFER’S LIGHTS CV4537 unassembled

These 1 watt, 2-function LED lights (smaller than a nickel) are super bright and small enough that you can put them almost anywhere. Use several to create your own unique design. May require a load equalizer. CV4540

CV4536 assembled

CV4530 installed

24

Lucifer Lights

2 Red lite set

Chrome

79.99

CV4540B Lucifer Lights

2 Red lite set

Black

79.99

CV4545

Lucifer Lights

2 Amber lite set

Chrome

79.99

CV4545B Lucifer Lights

2 Amber lite set

Black

79.99

Not DOT approved

25



ILLUMABEZEL™ Give your bike a facelift with our chrome-plated or black plastic bezel with smoked gray or clear lens and integrated L.E.D. run and turn signal. Fits 98-up Road Glide® Fairings. If you are eliminating your stock turn signals and using the Illumabezel as your only turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820). CV4850

Illumabezel

98 - up RG Fairing Chrome Bezel w/smoked lens 199.99

CV4851

Illumabezel

98 - up RG Fairing Chrome Bezel w/clear lens

199.99

CV4852

Illumabezel

98 - up RG Fairing Black Bezel w/smoked lens

199.99

CV4853

Illumabezel

98 - up RG Fairing Black Bezel w/clear lens

199.99

CV4850

Not DOT approved

BAG LITES™

CV4506B

These slick, chrome-plated LED Circular Bag Lites come with a special feature available nowhere else—a run-turn-brake controller (which only controls these lights) that illuminates the turn mode amber and the run and brake function in red. Complete with gasket and simple plug-in wiring. Fits 96-up 8-pin connector. If you are eliminating your rear stock turn signals and using the Bag Lites™ as your only rear turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820). No painting required! With wiring modifications, Bag Lites™ can be mounted onto any flat surface. Works on Road King Classic leather bags all fiberglass bags. CV4506

Bag Lites (2 lite set)

Chrome

259.99

CV4506B Bag Lites (2 lite set)

Black

259.99

CV4507

Chrome

399.99

Black

399.99

Bag Lites (4 lite set)

CV4507B Bag Lites (4 lite set)

CV4851

Patent # US 7,425,893 B2

CV4850 installed

CV4507B CV4852

Not DOT approved Note: 2010-up Street Glide and Road Glide® Customs require purchase of Molex adaptor (CV4895) See page 30.

CV4853

26

27



CV4860

CV4603

LITTLE LITE BRACKETS This little compact light bracket is the ticket for “where do I mount the turn signals?” Made from cold rolled steel and beautifully polished and chrome plated. For custom applications. CV4861

ELECTRA LIGHT TECH TRIM

Little Lite Brackets (set of 2)

29.99

Add some flare to your windshield with the latest lighting from CycleVisionsSM. Tech Trim is a windshield trim with integrated sequential amber turn signals (16 run-turn LED’s). Also available as a solid strip without lights. Plugs into stock harness; two holes needed to install. Fits 96-up FLHT® or FLHX® models. If you are eliminating your stock turn signals and using the Electra Light Trim as your only turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820). CV4860

CV4861B

CV4603

Patent Pending.

Electra-TechTrim

98-up FLHT/FLHX

Chrome

189.99

CV4860B Electra-Tech Trim

98-up FLHT/FLHX

Black

189.99

CV4861

98-up FLHT/FLHX

Chrome

39.99

Black

39.99

TechTrim-No Lites

CV4861B Tech Trim-No Lites 98-up FLHT/FLHX Not DOT approved

front

DELVIRA B-KINI JACKET Stay warm while you stay cool with our brand new Delvira jacket. Beautifully embroidered back and front. Dickies quilt-lined Eisenhower jacket. Woman’s jacket has red interior lining and is available in S-XL. Men’s jacket has a black interior lining and comes in M-3X, all with long arm length.

28

CVGDJKT

Woman’s Delvira B-Kini jacket

79.99

CVGDJKT

Men’s Delvira B-Kini jacket

79.99

29



CUSTOM CHOPPER WIRE HARNESS

THE FLASHER

Wiring made easy for custom motorcycles. Custom Applications Only. Comes with keyed on/off start switch, hi/lo toggle switch, fused circuits and wire ends.

The Flasher is a plug-in module that adds a rapid three time “flash” when breaking, and a “run/turn/brake” function to existing single filament OEM and halogen lights. It fits rear applications on 96-2010 Softails®, 97-2011 Dyna® & FLH® models (except 10-up Street Glide & Road Glide® Custom), and 99-03 XL®s. Not compatible with Panacea Tail Lights. If using with LED turn signals you must purchase a load equalizer (CV4820) if equipped with a factory alarm, or (CV4821) without an alarm). Does not work with 11-up Softail® and Dyna® models.

CV4869

Custom Chopper Wire Harness

179.99

IGNITION SWITCH W/ ON/OFF START CV4870

Ignition Switch

29.99

CV4805

CV4805

CV4814

CV4821

“The Flasher” Electronic Controller

6-8 PIN CONNECTOR CV4814

Comes with a detailed wire schematic.

6-8 Pin Plug Adapter

CV4820

04-up XL

24.99

LOAD EQUALIZER

CV4871

HEADLIGHT RUBBER ISOLATOR MOUNT CV4871

Headlight Rubber Isolator Mount - Deuce (Set of 3)

15.49

Replacement Headlight Socket 3-Prong Made of ceramic for use with high intensity bulbs

Load Equalizer (TSSM compatible)

34.99

CV4821

Load Equalizer (TSM compatible)

24.99

CV4710

Load Equalizer (eliminates the brake light/ warning light on bikes equipped with CAN Bus system) Requires 4715 pigtail adapter

59.99

CV4715

Pigtail adapter (for use with CV4710)

29.99

CV4500

Load Equalizer adapter (for use with CV4820 and CV4821) 29.99

CV4710

CV4715 CV4880

RED BULBS

REPLACEMENT HEADLIGHT SOCKET CV4880

CV4820

1156 single filament red bulb. CV4550

10.99

Red Rear Turn Signal Bulbs (Set of 10)

19.99

TAIL LIGHT WIRE HARNESS ADAPTER CV4895

Tail light wire harness adapter 10-up Street Glide and Road Glide Customs

39.99 CV4895

30

31


EXTENSIONS

FORWARD CONTROL EXTENSIONS For 00-up Softails® with forward controls. Extends them forward 2 or 3 inches (Perfect for riders 6 foot 3 and taller). With the 2-inch extension, you may elect to rebend the stock brake line. The 3-inch extension requires a longer brake hose (not included in kit). The extension plates are black in color. The shift rod is made from 303 stainless steel (can be polished or chrome-plated). CV300

2” forward control extension

00-up FXST & FXSTD models

119.99

CV301

3” forward control extension

00-up FXST & FXSTD models

119.99

“GO-FORWARD” FLOORBOARD EXTENSIONS This “Go-Forward” moves your floorboards and pedal assembly 2 inches forward for a more comfortable feel. Will not work with engine guards on FLSTS® or FLSTC® Heritage® or Springer®. Extension plates are made of 3/8 T6 billet aluminum and black powder coated. The master cylinder cover (CV305 only) is made from 16 gauge steel polished and chrome plated. Shift rod is made from 303 stainless steel, and can be polished or chromed. CV305 requires custom brake line available through Drag Specialties. CV302

Go-Forward Floor Board Extensions 00-up FLSTC, FLSTF, FLSTS & FLSTN models

129.99

CV305

Go-Forward Floor Board Extensions 86-99 FLST models

199.99 CV302 (2000-up Softails®)

CV301

CV305 (86-99 Softails®)

CHROME SHIFT ROD EXTENSION Extends any 5/16 x 24 stock or customs shift rod 1” to 4”. Made from 1018 cold roll steel. Polished and chrome plated.

32

CV310

1” Shift Rod Extension

21.99

CV307


21.99

CV308


21.99

CV309


24.99

33


EXTENSIONS

FORWARD CONTROL EXTENSIONS FOR VICTORY CRUISER & BAGGER MODELS

HANDLEBAR ADAPTER FOR VICTORY CRUISER & BAGGER MODELS

Extends them forward 2, 4 or 6 inches. The extension plates are black in color.

This adapter allows for installation of custom handlebars with a 3 1/2” center.

CV5022

2” forward control extension fits most 08-up cruiser & bagger models

129.99

CV5024


129.99

CV5026


129.99

CV5020

Handlebar adapter fits most 08-up cruiser & bagger models

99.99

CV5026

CV5024

CV5022

34

35


FAIRING MOUNTS

DYNA FAIRING MOUNTING KIT

SOFTAIL FAIRING MOUNTING KIT

Constructed of high quality steel with a powder-coated finish, this kit allows mounting of an 98-up FLTR® fairing on a Dyna. No frame modification necessary. Works with or without engine guard. Faring not included.

This kit allows for the installation of a 98-up FLTR fairing on a Softail®—no frame modification necessary! Constructed with high-quality steel with a black powder coat finish. FLTR®. Works with our without engine guard. Faring not included.

CV7275

Dyna Fairing Mount

02-05 FXWG

399.99

CV7277

Softail Fairing Mount 00-up FLSTC, FLSTF and FLSTN, except Springers 399.99

CV7276

Dyna Fairing Mount

06-up FXD, except Wide Glide

399.99

CV7278

Softail Fairing Mount 00-up FXST only, except Deuce & Springer

399.99

Check out ezel The Illumab 2 e g on pa 7

36

37


FAIRING MOUNTS

BATWING FAIRING BRACKET Constructed of high quality steel with a powder-coated finish, this kit allows mounting of an 96-up Harley Davidson® Batwing inner and outer fairing. No frame modification necessary. Works with or without engine guard. Faring not included. CV7290

Batwing Brackets 84-up FLSTC, FLSTF and FLSTN, except Springers

Check out Techtrim on page 28

38

89.99

CYCLEVISIONS APPAREL Your bike looks hot and so should you. We have great apparel for men and women. Check out our website for the latest Devil Head and Delvira wear— Dickies work shirts, t-shirts, lounge wear and intimates.

39


L I C E N S E P L AT E S

BEVELED BLIND HOLE LICENSE PLATE FRAME Chrome-plated aluminum construction and no visible screws makes this license plate frame ultra-cool and easy to install. CV4615

Beveled Plain Blind Hole License Plate

Chrome

29.99

CV4615B Beveled Plain Blind Hole License Plate

Black

29.99

CV4616

Chrome

59.99

Black

59.99

Beveled Plain Blind Hole License Plate w/lts

CV4616B Beveled Plain Blind Hole License Plate w/lts Not DOT approved

CV4611

CV4611B

SLICK SIGNALS LICENSE PLATE FRAME Slick Signal License Plate Frame & Turn Signals feature LED two-function lights. Can be wired up as run & brake or run & turn. Fits 4” x 7” license plates. Made from aluminum and polished and chrome plated. Not D.O.T. approved. For custom applications. May need Load Equalizer. CV4611

“Slick Signals” License Plate Frame w/lts

Chrome

99.00

CV4611B

“Slick Signals” License Plate Frame w/lts

Black

99.00

Front view

Not DOT approved

40

41



CV4819

ELIMINATOR™ Combine several components into one with the Eliminator™. Neatly replaces your existing taillight, turn signal assembly and license plate mount (simply plug into OEM wiring harness). Covers all existing holes and no painting required. Taillight assembly has run, turn and brake controller built in (controls these lights only). Turn signal illuminates Amber. If you are eliminating your stock turn signals and using the Eliminator as your only turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820). The Eliminator™ is the perfect companion to our Bag Lites™, sold separately. Made from aluminum, with a chrome finish or black powder coated, our lights are LED. CV4800

Eliminator 99-08 FLH

CV4800

Chrome 359.99

CV4800B Eliminator 99-08 FLH

Black

CV4801 Eliminator 00-10 FLSTC & 09-13 RoadKing Classic

Chrome 359.99

CV4801B Eliminator 00-10 FLSTC & 09-13 RoadKing Classic

Black 359.99

CV4802

CV4815

359.99

CV4819B Eliminator Faceplate and Light Assembly only

Black

Chrome 359.99

CV4822

Chrome 359.99

CV4802B Eliminator 00-10 FLSTF

Black

CV4822B Eliminator 96-99 FLSTC

Black

CV4803

Chrome 359.99

CV4823

Chrome 359.99

Eliminator 00-10 FLSTF

Eliminator 00-03 Sportster

CV4803B Eliminator 00-03 Sportster

Black

CV4804

CV4815

359.99 CV4815B

359.99

Eliminator 86-95 FLSTC

359.99

CV4823B Eliminator 86-95 FLSTC

Black

Chrome 359.99

CV4824

Chrome 359.99

CV4804B Eliminator 08-11 FXD, FSCL & FXDC

Black


Black

CV4806

Chrome 359.99

CV4825

Chrome 359.99

CV4806B Eliminator 04-up XL’s

Black


Black

CV4808 Eliminator 09-up FLHT, except Street Glide or Road Glide Custom

Chrome 359.99

CV4833

Chrome 359.99

Eliminator 08-11 FXD, FSCL & FXDC

Eliminator 04-up XL’s

359.99

359.99 CV4816

CV4808B Eliminator 09-up FLHT, except Street Glide or Road Glide Custom

Black

CV4815

Chrome 389.99

Eliminator 06-08 Dyna Wide Glide

359.99



Eliminator 97-98 FLH

CV4816

359.99

359.99

Black

CV4834

Chrome 359.99

Eliminator 09-12 Street Bob

CV4835

Black

359.99

359.99

Eliminator 10-up Street Glide & Road Glide Custom Chrome 389.99

CV4815B Eliminator 06-08 Dyna Wide Glide

Black

CV4816

Chrome 389.99

CV4835B Eliminator 10-up Street Glide & Road Glide Custom Black

CV4816B Eliminator 06-10 FXST

Black

CV4836

CV4817

Chrome 389.99

Cv4836B Eliminator 12-up Softail Slim

Black

CV4817B Universal Laydown Fender Mount

Black

389.99

CV4841

Eliminator 11- up FLSTC & Dyna Switchback

Chrome 359.99

CV4818

Chrome 389.99

CV4842

Eliminator 11- up FLSTF & 12-up Dyna SuperGlide Chrome 359.99

CV4818B Eliminator 08-11 FXEF (Fat Bob)

Black

389.99

CV4844

Eliminator 12-up Super Glide Custom

Chrome 359.99

CV4819

Chrome 329.99

CV4848

Eliminator 12-up Fat Bob

Chrome 359.99

Eliminator 06-10 FXST

Universal Laydown Fender Mount

Eliminator 08-11 FXEF (Fat Bob)

Eliminator Faceplate and Light Assembly only

389.99

359.99

CV4833B Eliminator 97-98 FLH

CV4834B Eliminator 09-12 Street Bob

389.99

CV4817

42

Eliminator 96-99 FLSTC

329.99

CV4817

Eliminator 12-up Softail Slim

389.99

Chrome 389.99 389.99

Not DOT approved

43



RECESSED TURN SIGNAL COVER PLATES & BOLTS Covers holes left after removing turn signals and adding Eliminator on 06-up Dynas. CV4813

Recessed Cover Plates & bolts (set of 2)

24.99 CV4813

CV4812

ELIMINATOR™ II TAIL LIGHT ASSEMBLY This custom taillight and turn signal assembly features CycleVisions’ exclusive Bag Lites™ featuring a red run & brake with amber turn signals and a lighted license plate frame. If you are eliminating your stock turn signals and using the Eliminator as your only turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820). Back plate is made of .125” steel and powder coated black. Lights and license plate frame are available in Chrome or Black powder coated finish and come with plugn-play wire harness. Available for most FXST® & FXWG® models. CV4826

Eliminator II

96-99 FXST

Chrome 279.99 279.99

ELIMINATOR™ LICENSE BRACKET Eliminates rear license plate bar on 97-08 FLH models® CV4812

License Plate Bar Eliminator

FIBERGLASS RECESSED POCKETS

CV7270

These fiberglass pockets allow you to french in either CycleVisions Eliminator™ (CV4819) or Slick Signals (CV4611) on custom rear fenders. For custom applications only. SM

CV4826B Eliminator II

96-99 FXST

Black

CV4827

Eliminator II

86-95 FXST

Chrome 279.99


86-95 FXST

Black

CV4828

Eliminator II

00-02 FXST

Chrome 279.99


00-02 FXST

Black

CV4829

Eliminator II

03-05 FXST

Chrome 279.99


03-05 FXST

Black

CV4830

Eliminator II

86-95 FXDWG

Chrome 279.99


86-95 FXDWG

Black

CV4831

Eliminator II

96-01 FXDWG

Chrome 279.99


96-01 FXDWG

Black

CV4832

Eliminator II

02-05 FXDWG

Chrome 279.99

CV4811


02-05 FXDWG

Black

CV4811B Pyramid Cover

279.99

29.99

CV7270

Fiberglass Recessed Pockets

Slick Signal

69.99

CV7271

Fiberglass Recessed Pockets

Eliminator

69.99

279.99

279.99

279.99

279.99

279.99

PYRAMID COVER The CycleVisionsSM Pyramid is designed to cover the three holes left when relocating stock license plates above the stock tail light, or the Eliminator™ tail light (see page 42-43) on your rear fender. Fits all FL® Softails®, 99-03 XLs®, 99-03 FXD® Dynas®. Polished and chrome plated aluminum construction. Pyramid Cover

Chrome

29.99

Black

29.99

CV7271

See more er Pyramid Cov s to o h p on page 12

CV4811B

Not DOT approved

44

45



Rear view of horizontal in-close

“IN-CLOSE” LICENSE PLATE HOLDER Beveled & chromed. No visible fasteners! Most tucked-in holder on market. Made from T-6 billet aluminum polished and chrome plated. Fits 4x7 license plates only. Specify make and model when ordering. Available for most models. 4606 does not work with Rockers.

Vertical In-Close Chrome

Horizontal In-Close (black)

Horizontal In-Close (chrome)

46

CV4600

In-Close

86-07 Softail

Chrome

Vertical

199.99

CV4600B

In-Close

86-07 Softail

Black

Vertical

199.99

CV4600BH In-Close

86-07 Softail

Black

Horizontal

199.99

CV4600BL In-Close

86-07 Softail

Black w/lts

Horizontal

229.99

CV4600BLH In-Close

86-07 Softail

Black w/lts

Vertical

229.99

CV4604L

In-Close

05-up XL

Chrome w/lts

Vertical

229.99

CV4600H

In-Close

86-07 Softail

Chrome

Horizontal

199.99

CV4604LH In-Close

05-up XL

Chrome w/lts

Horizontal

229.99

CV4600L

In-Close

86-07 Softail

Chrome w/lts

Vertical

229.99

CV4605

In-Close

06 -07 Dyna

Chrome

Vertical

199.99

CV4600LH In-Close

86-07 Softail

Chrome w/lts

Horizontal

229.99

CV4605B

In-Close

06 - 07 Dyna

Black

Vertical

199.99

CV4601

In-Close

91-05 Dyna

Chrome

Vertical

199.99

CV4605BH In-Close

06 - 07 Dyna

Black

Horizontal

199.99

CV4601B

In-Close

91-05 Dyna

Black

Vertical

199.99

CV4605BL In-Close

06 - 07 Dyna

Black-w/lts

Vertical

229.99

CV4601BH In-Close

91-05 Dyna

Black

Horizontal

199.99

CV4605BLH In-Close

06 - 07 Dyna

Black-w/lts

Horizontal

229.99

CV4601BL In-Close

91-05 Dyna

Black-w/lts

Vertical

229.99

CV4605H

In-Close

06 -07 Dyna

Chrome

Horizontal

199.99

CV4601BLH In-Close

91-05 Dyna

Black-w/lts

Horizontal

229.99

CV4605L

In-Close

06 - 07 Dyna

Chrome w/lts

Vertical

229.99

CV4601H

In-Close

91-05 Dyna

Chrome

Horizontal

199.99

CV4605LH In-Close

06 - 07 Dyna

Chrome w/lts

Horizontal

229.99

CV4601L

In-Close

91-05 Dyna

Chrome w/lts

Vertical

229.99

CV4606

In-Close

08-up Softail

Chrome

Vertical

199.99

CV4601LH In-Close

91-05 Dyna

Chrome w/lts

Horizontal

229.99

CV4606B

In-Close

08-up Softail

Black

Vertical

199.99

CV4602

In-Close

86-04 Sportster

Chrome

Vertical

199.99

CV4606BH In-Close

08-up Softail

Black

Horizontal

199.99

CV4602B

In-Close

86-04 Sportster

Black

Vertical

199.99

CV4606BL In-Close 08-up Softail

Black w/lts

Vertical

229.99

CV4602BH In-Close

86-04 Sportster

Black

Horizontal

199.99

CV4606BLH In-Close

08-up Softail

Black w/lts

Horizontal

229.99

CV4602BL In-Close

86-04 Sportster

Black-w/lts

Vertical

229.99

CV4606H

In-Close

08-up Softail

Chrome

Horizontal

199.99

CV4602BLH In-Close

86-04 Sportster

Black-w/lts

Horizontal

229.99

CV4606L

In-Close

08-up Softail

Chrome w/lts

Vertical

229.99

CV4602H

In-Close

86-04 Sportster

Chrome

Horizontal

199.99

CV4606LH In-Close

08-up Softail

Chrome w/lts

Horizontal

229.99

CV4602L

In-Close

86-04 Sportster

Chrome w/lts

Vertical

229.99

CV4607

In-Close

08-up Dyna

Chrome

Vertical

199.99

CV4602LH In-Close

86-04 Sportster

Chrome w/lts

Horizontal

229.99

CV4607B

In-Close

08-up Dyna

Black

Vertical

199.99

CV4604

In-Close

05-up XL

Chrome

Vertical

199.99

CV4607BH In-Close

08-up Dyna

Black

Horizontal

199.99

CV4604B

In-Close

05-up XL

Black

Vertical

199.99

CV4607BL In-Close

08-up Dyna

Black-w/lts

Vertical

229.99

CV4604BH In-Close

05-up XL

Black

Horizontal

199.99

CV4607BLH In-Close

08-up Dyna

Black-w/lts

Horizontal

229.99

CV4604BL In-Close

05-up XL

Black w/lts

Vertical

229.99

CV4607H

In-Close

08-up Dyna

Chrome

Horizontal

199.99

CV4604BLH In-Close

05-up XL

Black w/lts

Horizontal

229.99

CV4607L

In-Close

08-up Dyna

Chrome w/lts

Vertical

229.99

CV4604H

05-up XL

Chrome

Horizontal

199.99

CV4607LH In-Close

08-up Dyna

Chrome w/lts

Horizontal

229.99

In-Close

Rear view of vertical in-close

Horizontal In-Close installed

47


MOFLOW

MOFLOW™ AIR CLEANERS The MoFlow™ air cleaner assembly is made from aluminum, polished and chrome plated. Hidden fasteners and internal breather tube make for a clean look. Each air cleaner assembly contains a reusable pleated gauze performance filter that has been engineered and flow tested to 187.5 cfm. at 400 inches to obtain maximum flow and protection for your motor. Seal breather assembly velocity plate and all necessary mounting hardware included. To specify powder black, add B to the end of any MoFlow™ part number when ordering; to specify gloss black, add GB to the end.

Seal breather assembly velocity plate and all necessary mounting hardware included.

CV9001

MoFlow Air Filter Assy.

93-99 EVO & Big Twin w/ CV or Mikuni Carb

Chrome

299.99

CV9001B



Wrinkle Black

299.99

CV9001GB



Gloss Black

299.99

CV9002

MoFlow Air Filter Assy

99-up TC

Chrome

299.99

CV9002B


99-up TC

Wrinkle Black

299.99

CV9002GB


99-up TC

Gloss Black

299.99

CV9003


89-up XL w/CV, Delphi or Mikuni

Chrome

299.99

CV9003B



Wrinkle Black

299.99

CV9003GB



Gloss Black

299.99

CV9004


93-99 EVO BT W/ S&S super E or G

Chrome

299.99

CV9004B


93-99 EVO BT W/ S&S super E or G

Wrinkle Black

299.99

CV9004GB


93-99 EVO BT W/ S&S super E or G)

Gloss Black

299.99

CV9005


99-07 BT w/S & S

Chrome

299.99

CV9005B


99-07 BT w/S & S

Wrinkle Black

299.99

CV9005GB


99-07 BT w/S & S

Gloss Black

299.99

CV9006


89-07 XL w/S & S Super E or G

Chrome

299.99

CV9006B



Wrinkle Black

299.99

CV9006GB



Gloss Black

299.99

CV9007


08-up FLH’s

Chrome

299.99

CV9007B


08-up FLH’s

Wrinkle Black

299.99

CV9007GB


08-up FLH’s

Gloss Black

299.99

CV9053

MoFlow Filter

59.99

CV9070

MoFlow Hardware EVO/XL Kits Breather Bolts

36.99

CV9071

MoFlow Hardware TC Kits Breather Bolts

36.99

CV9072

MoFlow Hardware 08-up FLH Kits Breather Bolts

36.99

Check out Injecticover, page 13

chrome

EO#D-668, available for all CA EFI models. Low profile design allows 1” more leg room and a more comfortable ride.

gloss

Hidden fasteners and internal breather tube make for a clean look.

wrinkle

48

49


ROAD ROD

CycleVisionsSM turns up the heat with the Road-Rod™. Turn your V-Rod® into a full dresser. There truly is nothing like it. Front to back, top to bottom, and absolutely no welding required.

ROAD-ROD™ FAIRING MOUNT KIT This kit converts your V-Rod® into a Road-Rod® using a Road Glide® fairing. Made from high quality steel and powder coated silver or black. No gauges or audio is included in the Road-Rod™ kit. Does not include fairing. Does not work with Street Rod or Muscle. CV6000

Road Rod Fairing Kit

02-06

Silver

399.99

CV6001


02-06

Black

399.99

CV6004


07-11

Silver

399.99

CV6005


07-11

Black

399.99

FAT ROD FENDERS Our latest V-Rod® enhancement is easy on the eyes. Both front and rear fenders (fiberglass construction) fit 02-06 A & B model V-Rods® (front fender fits all models except Street-Rod® and Muscle®). Bagger-style front fender. Fat Rod Rear Fender has recess for Eliminator™ tail light assembly (CV4819, sold separately). CV6230

Fat Rod Front Fender 02-11

299.99

CV6231

Fat Rod Rear Fender 02-06

359.99

CV6230

CV6231

50

51


ROAD ROD

CV6210

CV6200

ROAD-ROD™ REAR FENDER EXTENSION Made of gel coated Fiberglass. Parts ship unpainted. CV6210

RR Rear Fender Extension 02-06

399.99

CV6220

RR Rear Fender Extension 07-11

399.99

CV6201

ROAD-ROD™ SADDLEBAG MOUNTING KIT For use with CV saddlebags only. Not compatible with other saddlebags. Complete the Road Rod® conversion kit with this saddlebag mounting system. Mounting kits are made from high quality steel and powder coated silver or black. Patent Pending. Does not work with Muscle, Street Rod or Night Rod. CV6200

RR Saddle Bag System Kit 02-06

Silver

299.99

CV6201


Black

299.99

CV6202


Silver

299.99

CV6203


Black

299.99

ROAD-ROD™ SADDLEBAGS Made of gel coated Fiberglass. Parts ship unpainted.

52

CV6206

RR Bag - Right

399.99

CV6208

RR Bag - Left

399.99

53


ROAD ROD

ROAD ROD™ PACK RACK MOUNT Customize it your way! The CycleVisionsSM Road Rod™ pack Rack Mount allows you to use either a Harley Davidson® quick release tour pack mount or a Road King® sissy bar. Made from high quality steel. Raw finish. CV6300

02-06 A & B models

$179.99

CV6301

07-11 except Street Rod and Muscle $179.99

Works with Tour Package...

FLOORBOARD MOUNTING KIT Allows installation of Harley Davidson® style floorboards on your V-Rod®. No modifications necessary. Front mounts are made from T-6 billet aluminum and polished. Rear mounts are made from high quality steel and powder coated silver or black. Does not include floorboards. CV6100

Road Rod Floorboard Brackets Kit 02-11, except Muscle Street Rod or Night Rod

Silver

225.99

CV6101

Road Rod Floorboard 4s Kit 02-11, except Muscle Street Rod or Night Rod

Black

225.99

...and Road King® Sissy Bar

ROAD-ROD™ REAR FOOTPEG RELOCATION KIT This product allows you to relocate the rear passenger foot pegs to the swing arm pivot shaft for a more comfortable position. The shaft is made of 1018 cold roll steel. Covers are made from the billet aluminum T6, polished and chrome plated. Does not include pegs. Does not work on Street Rod, Muscle or Night Rod. CV6120

RR Passenger Rear Foot Pegs Mount Kit Samson or SuperTrap Exhaust

CV6120B RR Pass Rear Foot Pegs Mount Kit Samson or SuperTrap Exhaust CV6130

RR Passenger Rear F/P Mount Stock or Screamin Eagle Exhaust

CV6130B RR Passenger Rear F/P Mount Stock or Screamin Eagle Exhaust

54

Black

Black

Installed Pack Rack Mount

249.99 249.99 249.99 249.99

55


SISSY BARS

30 inch

ATTITUDE STICK SISSY BARS

CV8000

30” Attitude

Chrome

129.99

Old School attitude sticks are made from 9/16 round steel bar. Maltese, Dagger and Spade styles are made from 9/16 square steel bar. Available in two sizes—approximately 30” or 18”. Side plates must be purchased separately. Fits all side plates except for Plug-N-Play®. Old School sissy bars not designed to hold passengers. Square stock will hold passengers. Part # CV8000–CV8002 fits all models and width.

CV8001

30” Attitude

Black Powder Coated

129.99

CV8002

30” Attitude

Raw

114.99

CV8003

18” Attitude

Chrome

fits 8.25” to 8.75” side plates

129.99

CV8003B 18” Attitude

Black


129.99

CV8004

Chrome


129.99


Black

fits 6.88” to 7.625”

129.99

CV8025

Chrome

fits 11” side plates

129.99


Black


129.99

CV8026

Chrome


129.99

Black


129.99

18” Attitude

18” Attitude

30” Attitude


18 inch

r Check out ou s, te la P Deuce Side 0 6 page

CV8000

56

CV8001

CV8002

CV8003

57


CV8005

30” Crosstude

Chrome


199.99

CV8005B 30” Crosstude

Black


199.99

CV8006

Chrome


199.99


Black


199.99

CV8007

Chrome

fits 6.88” to 7.625”side plates

199.99


Black


199.99

CV8008

Chrome


199.99

Black


199.99


199.99

CV8009B 30” Daggertude Black


199.99

CV8010


199.99



199.99

CV8011


199.99



199.99

CV8012


199.99


199.99

18” Crosstude

30” Crosstude

18” Crosstude

CV8008B 18” Crosstude CV8009

30” Daggertude Chrome




CV8012B 18” Daggertude Black CV8013

30” Spadetude

Chrome


199.99

CV8013B 30” Spadetude

Black


199.99

CV8014

Chrome


199.99


Black


199.99

CV8015

Chrome


199.99


Black


199.99

CV8016

Chrome


199.99


Black


199.99

CV8027

Chrome


199.99


Black


199.99

CV8028

Chrome


199.99

Black


199.99


199.99



199.99

CV8030


199.99


199.99

18” Spadetude

30” Spadetude

18” Spadetude

18” Crosstude

30” Crosstude

CV8028B 30” Crosstude CV8029




58

SISSY BARS

CV8075 Deuce Side plates with CV8014 Spadetude 18” installed

30” Crosstude

18” Crosstude

30” Daggertude

18” Daggertude

rs Our sissy ba of ty e fit a vari ths. id w side plate

30” Spadetude

18” Spadetude

59


SISSY BARS

MULTITUDE SISSY BARS

MULTITUDE TOPPERS

Screw on your attitude. Made from 9/16 square steel bar, the Multitude sissy bar accommodates any knob with a 3/8-16 thread (We offer five cool toppers). Side plates must be purchased separately. The Multitude fits all side plates except for Plug-NPlay®. Order by style, size and width. For show use only. CV8017

18” Multitude

Chrome

fits 8.25” - 8.75” side plates

199.99

CV8017B 18” Multitude

Black

fits 8.25” - 8.75” side plates

199.99

CV8018

Chrome

fits side 8.25” - 8.75” plates

199.99


Black

fits side plates from 8.25” - 8.75”

199.99

CV8019

Chrome


199.99


Black


199.99

CV8020

Chrome


199.99


Black


199.99

CV8031

Chrome


199.99


Black


199.99

CV8032

Chrome


199.99

Black


199.99

30” Multitude

18” Multitude

30” Multitude

18” Multitude

30” Multitude


CV8050

Multitude Eyeball Topper

49.99

CV8051

Multitude 8-Ball Topper

24.99

CV8052

Multitude Cycle Visions Devil Topper

39.99

CV8053

Multitude Devil Head Topper

39.99

CV8075

CV8050

DEUCE® SISSY BAR SIDE PLATES Ridge mount sissy bar side plates for Harley Davidson Deuce®. Accommodates all 8-3/4” wide CycleVisionsSM Attitude style sissy bar sticks or stock Harley Davidson® sissy bars. Made of 120 thick steel and polished, and chrome plated.

18 inch

CV8075

Sissy Bar Side Plates Chrome Fits Deuce 79.99

CV8075B Sissy Bar Side Plates Black

Fits Deuce 79.99

CV8051

CV8052 CV8075B installed

CV66210

CV66210 CV8053

CV8054

60

61

PRODUCT PRICE LIST

62

63

™

by Randy Aro n

4263 Taylor Street San Diego, CA 92110 619.295.7800 cyclevisions.com