Chopra, Anil K. 1995. Dynamics of Structures. Prentice Hall, Inc. Upper Saddle
River,. N.J.. Cramer, C.O. 1968. “Load Distribution in Multiple-bolt Tension Joints.
References
American Forest and Paper Association (AFPA). 1997. ANSI/AF&PA NDS-1997. National Design Specifications for Wood Construction. AFPA, Washington DC. American Forest and Paper Association (AFPA). 1999. “General Dowel Equations for Calculating Lateral Connection Values.” Technical Report 12. AFPA, Washington, DC. Annual Book of ASTM Standards v4.10, 2001. “Test Methods for Mechanical Fasteners in Wood.” American Society of Testing and Materials Standard D 1761-88. ASTM, Philadelphia, PA. Annual Book of ASTM Standards v4.10, 2001. “Standard Test Method for Evaluating Dowel-Bearing Strength for Wood and Wood-Based Products.” American Society of Testing and Materials Standard D 5764-97a. ASTM, Philadelphia, PA. Annual Book of ASTM Standards v4.10, 2001. “Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials.” American Society of Testing and Materials Standard D 4442-92. ASTM, Philadelphia, PA. Annual Book of ASTM Standards v4.10, 2001. “Standard Test Method for Specific Gravity of Wood and Wood-Based Materials.” American Society of Testing and Materials Standard D 2395-93. ASTM, Philadelphia, PA. Annual Book of ASTM Standards v4.10, 2001. “Standard Test Method for Determining Bending Yield Moment of Nails.” American Society of Testing and Materials Standard F 1575-95. ASTM, Philadelphia, PA. ASTM, 1999. “Standard Test Method for Cyclic Properties of Connections Assembled with Mechanical Fasteners.” American Society of Testing and Materials Standard E06.13. 7th Draft Standard. ASTM, Philadelphia, P.A.. Chopra, Anil K. 1995. Dynamics of Structures. Prentice Hall, Inc. Upper Saddle River, N.J.. Cramer, C.O. 1968. “Load Distribution in Multiple-bolt Tension Joints.” Journal of Structural Division, ASCE 94 (STS): 1101-1117. Doyle, D. 1964. “Performance of Joints with Eight Bolts in Laminated Douglas-fir.” USDA Forest Service Research Paper FPL-10. Forest Products Laboratory. Madison, WI. Doyle, D. and Scholten, J.A. 1963. “Performance of Bolted Joints in Douglas-fir.” USDA Forest Service Research Paper FPL-2. Forest Products Laboratory. Madison, WI.
Foliente, G.C., 1996. “Issues in Seismic Performance Testing and Evaluation of Timber Structural Systems.” Proceedings of the 1996 International Wood Engineering Conference, New Orleans, Vol. 1, pp. 29-36. Gutshall, S.T. 1994. Monotonic and Cyclic Short-term Performance of Nailed and Bolted Timber Connections, thesis submitted in partial fulfillment of the Masters of Science Degree at Virginia Polytechnic Institute and State University. Harding, N. and Fowkes, A.H.R. 1984. “Bolted Timber Joints.” Proceedings of the Pacific Timber Engineering Conference. Vol. 3: 872-883. Heine, C.P. 2001. Simulated Response of Degrading Hysteretic Joints with Slack Behavior. Ph.D. Dissertation. Virginia Polytechnic Institute and State University. Blacksburg, VA. Isumov, N. 1967. “Load Distribution in Multiple Shear-plate Joints in Timber.” Publication No. 1203. Canada Department of Forestry. Ottawa, Canada. Johansen, T.W. 1949. “Theory of Timber Connections.” International Association for Bridge and Structural Engineering. Vol. 9: 249-262. Jorissen, A. 1998. Double Shear Timber Connections with Dowel Type Fasteners. Delft University Press. Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A., and R. Medina. 2001. Development of a Testing Protocol for Woodframe Structures. Consortium of Universities for Research in Earthquake Engineering (CUREE)-Caltech Woodframe Project. CUREE Publication No. W-02. Kunesh, R.H. and Johnson, J.W. 1968. “Strength of Multiple Bolt Joints.” Lab. Rep. T24. Corvallis, OR: Oregon State University, School of Forestry. Lantos, G. 1969. “Load Distribution in a row of Fasteners Subjected to Lateral Load.” Wood Science. Vol. 1(3): 129-136. Longworth, J. and McMullin, A.E. 1963. “Effect of Moisture Content on Strength of Bolted Timber Connections.” Forest Products Journal. March pp. 248-253. McLain, T.E. 1991. “Engineered Wood Connections and the 1991 National Design Specifications.” Wood Design Focus, Summer 1991: 7-10. Mclain, T.E. and Tangjitham, S. 1983. “Bolted Wood Joint Yield Model.” Journal of Structural Division, ASCE, 109 (8), 1820-1835.
Mohammad, M., Quenneville, J.H.P., and Smith, I., 1998. “Influence of Cyclic Loads on Strength and Stiffness of Bolted Timber Connections.” Proceedings of the 5th World Conference on Timber Engineering. Vol. 1: 375-382. Moss, P.J. 1996. “Research into Row Modification Factors for Multiple-bolted Timber Joints.” Proceedings of the International Wood Engineering Conference. Vol. 4: 197-204. National Forest Products Association (NFPA). 1971. National Design Specifications for Stress-Grade Lumber and its Fasteners. NFPA, Washington DC. National Forest Products Association (NFPA). 1973. National Design Specifications for Stress-Grade Lumber and its Fasteners. NFPA, Washington DC. National Forest Products Association (NFPA). 1986. National Design Specifications for Wood Construction. NFPA, Washington DC. National Forest Products Association (NFPA). 1991. National Design Specifications for Wood Construction. NFPA, Washington DC. National Lumber Manufactures Association (NLMA). 1944. National Design Specifications for Stress-Grade Lumber and its Fasteners. NLMA, Washington DC. Salenikovich, A.J., Loferski, J.R., and Zink, A.G. 1996. “Understanding the Performance of Timber Connections Made With Multiple Bolts.” Wood Design Focus. Vol. 7(4): 1926. Soltis, L.A., Hubbard, F.K., and Wilkinson, T.L. 1986. “Bearing Strength of Bolted Timber Joints.” Journal of Structural Engineering, ASCE, 112 (9), 2141-2154. Soltis, L.A. and Wilkinson, T.L. 1987. “Bolted-Connection Design.” USDA Forest Service General Technical Report FPL-GTR-54. Forest Products Laboratory. Madison, WI. Stern, E. 1940. “A study of Lumber and Plywood Joints with Metal Split-ring Connectors.” Engineering Experiment Station Bulletin, No. 53. Pennsylvania State University. State College, Pennsylvania. Trayer, G.W. 1932. “The Bearing Strength of Wood Under Bolts.” Technical Bulletin No. 332. USDA Washington DC. Wilkinson, T. 1980. “Assessment of Modification Factors for a Row of Bolts or Timber Connectors.” USDA Forest Service Research Paper FPL-376. Forest Products Laboratory. Madison, WI. Wilkinson, T. 1986. “Load Distribution Among Bolts Parallel to Load.” Journal of Structural Engineering, ASCE, 112 (4), 835-852.
Wilkinson, T. 1991. “Dowel Bearing Strength.” USDA Forest Service Research Paper FPL-RP-505. Forest Products Laboratory. Madison, WI. Zahn, J. 1991. “Design Equation for Multiple Fastener Wood Connections.” Journal of Structural Engineering, ASCE, 117 (11), 3477-3486.
