Generally used on snare drums, tom toms, and at the bottom of a bass drum. ...
feature. • Special Snares -The SC-363E fits Ludwig Super Sensitive Snare drums
.
CUSTOM DRUM PARTS AND ACCESSORIES
“JAW” Hoop Mountable Multi-Purpose Holders
Throne Separates Bases
Hoop Clamping Jaws SC-JPM
GIBRALTAR THRONE SEATS AND THRONE BASES Available separately. All seats fit into Gibraltar throne bases or any 7/8” dia. shaft. All seats and bases are covered under Gibraltar’s 3-year warranty.
NEW
SC-JCM
SC-JDRM
SC-JMM
NEW SC-JMM
SC-JDRMM B9508
Rod Clamping Jaw Note: Clamps on conga and timbale tension rod.
SC-JCMTR
SC-JPMTR
B9508EX
2
CONTENTS Contents:
Page No.
“Jaw” Multi-Purpose Holders . . . . . . . . . . . . . . . . . . . . . . . . .2
Gibraltar Tom Suspension System . . . . . . . . . . . . . . . . . . . .10
Drum Throne Separates . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Cymbal Arms & Mounting Systems . . . . . . . . . . . . . . . . .10-11
Gibraltar Throne Seats (Roc-N-Soc) . . . . . . . . . . . . . . . . . . . .3
Multi-Clamps & Spanner Parts . . . . . . . . . . . . . . . . . . . . . . .12
Special Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cymbal Stand Parts & Rubber Feet . . . . . . . . . . . . . . . . . . .13
Snare Drum & Tom Tom Parts . . . . . . . . . . . . . . . . . . . . . . . . .4
Hi-Hat Parts & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .13
Snare Drum Snares & Parts . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hand Percussion Mounting Systems . . . . . . . . . . . . . . . .14-17
Bass Drum Parts & Accessories . . . . . . . . . . . . . . . . . . . . . . .6
Hand Drum Parts & Accessories . . . . . . . . . . . . . . . . . . . . .17
Bass Drum Pedal Parts & Accessories . . . . . . . . . . . . . . . . .7
Gibraltar Power Rack Parts & Accessories . . . . . . . . . . . . .18
High-Use Bass Pedal Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rack Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Tom Tom Mounting Systems . . . . . . . . . . . . . . . . . . . . . . . .8-9
Gibraltar Road Series Parts & Accessories . . . . . . . . . . . . .19 Notes: Specifications subject to change without prior notice. DW, GMS, Ludwig, L.P., Mapex, Noble & Cooley, Pearl, Premier, Remo, R.I.M.S., Sonor, Tama, and Yamaha are registered trademarks of each respective company.
Gibraltar Throne Seats By Roc-N-Soc
Throne Seats CONVENTIONAL SIZED SEATS
S9508RB
S9508R RSGRC RSGBR
RSGMC
OVERSIZED SEATS “Super Lock” seat fastening system
RSGRTC
S9508MB
Special Holders
NEW
9508OSS SC-SDH
S9508C
S9508M
OVERSIZED SEATS SC-SH
3 “JAW” Multi-Purpose Holders Gibraltar’s “Jaw” percussion clamps are designed to provide an easy uncluttered way of mounting various percussion instruments or microphones to drums, congas, bongos and other instruments via their hoop or tension rod.
JAW HOOP MOUNTS
NEW
SC-JMM - Mic Holder. 1 pk. 40.50 SC-JPM - Percussion Holder.1 pk. 40.50 SC-JCM - Cymbal Holder. 1 pk. 40.50 SC-JDRM -Double Ratchet Mount. Allows more adjustability. Can be used with 9.5mm L-Rod. 1pk. 33.50 SC-JDRMM - -Double Ratchet Mic Mount. Same as SC-JDRM, but includes Mic Mounting Rod. 1pk. 40.50
JAW TENSION ROD MOUNTS SC-JPMTR - Percussion Mount for Tension Rod mounting. 1 pk. 40.50 SC-JCMTR - Cymbal mount for tension rod mounting. 1 pk. 40.50
THRONE BASE ASSEMBLIES B9508EX - Double-Braced Extended Height Throne Base. 117.95 B9508 - Double-Braced Throne Base. 114.95
THRONE SEATS Gibraltar throne seats are equipped with the new super lock throne seat fastening system. This provides rock solid support with more durability. All Gibraltar seats utilize a molded foam material. This firmer material provides better lower back support and comfort. S9508RB - Round Vinyl Seat with Backrest. 110.95 S9508R - Vinyl Round Seat. 59.95 S9508MB - Oversized Cordura/Vinyl Moto Style Seat. 138.95 S9508C - Round Cordura Seat with Thigh Cut Outs. 80.95
S9508M - Moto Style Cordura/Vinyl Seat. 91.95 9508OSS - Oversized Drum Seat 16” Dia..Stainless Steel throne bracket. 119.95
RSGMC - Oversized Motorcycle Seat. 149.95
GIBRALTAR THRONE SEATS BY ROC-N-SOC
SPECIAL HOLDERS
NEW
Gibraltar offers three throne seats designed and manufactured for Gibraltar Hardware by Roc-N-Soc USA. All seats fit onto a 7/8” dia. shaft. Each seat utilizes Roc-N-Soc’s oversized design and premier foam and covering material which will provide years of solid support. RSGRC - Oversized Round Seat. 144.95 RSGBR - Backrest Attachment For Gibraltar/Roc-N-Soc seats. 102.95
RSGRTC - Oversized Round Seat with thigh cutouts 144.95
SC-SDH - Soft Drink Holder - Soft nylon holder clamps to any stand. Now fits 1 liter bottles and most drink containers. 1 pk. 25.95 SC-SH - Stick Holder - 3-1/2” dia. holder holds up to six pairs of sticks. Detachable soft bag clamps to various drum stands. 1 pk. 25.95
Snare Drum & Tom Tom Parts SC-4235
SC-1410SS
SC-4400
SC-4E
SC-4B SC-4C
SC-4J
SC-SSW
SC-1410BS
SC-LG
SC-11C
SC-LN
TENSION RODS AND SNARES GLOSSARY Key Rod - Tension rod with drum key style head. Generally used on snare drums, tom toms, and at the bottom of a bass drum. T-Rod - Tension rod with T-handle. Used on bass drums.
DIAMETERS
SC-1410SSD
7/32" - Fits toms and snares for Pearl, CB, Mapex, Tama, Ludwig, GMS, Legend, Noble & Cooley, Premier and most other manufacturers with the exception of Sonor.
SC-1410BSD
Note: 7/32" rods will fit D.W. drums prior to 1996 production.
6mm - Fits bass drums for Pearl, CB, Mapex, and other generic Taiwan-made drums. Other manufacturers generally use 7/32" dia. bass drum key rods (see chart on page 7).
NEW SC-4244
LENGTHS SC-4J - 1-3/8" (35mm) - Fits many piccolo snare drums and small tom toms. SC-4C - 1-5/8" (41mm) - Fits many snare drums, small and medium toms, and some floor toms.
SC-4248 SC-4245 SC-RLW
SC-4B - 2" (51mm) - Fits toms and floor toms with a lot of space between hoop and tension casing. SC-4E - 2-3/8" (58mm) - Fits some floor toms and bass drums.
4 STEEL POWER HOOPS
SNARE SIDE HOOPS
2.3mm heavy-duty chrome drum hoops. Provide consistent shape/ tension and clearer sound.
SC-1006SS SC-1206SS SC-1308SS SC-1408SS SC-1410SS
BATTER SIDE HOOPS
-
10”/6 Lug. 1 pk. 12”/6 Lug. 1 pk. 13”/8 Lug. 1 pk. 14”/8 Lug. 1 pk. 14”/10 Lug. 1 pk.
SC-0804TT - 8”/4 Lug Tom.1 pk. 16.50
17.95 19.50 23.50 23.95 23.95
NEW
SC-1006TT - 10”/6 Lug Tom.1 pk. 17.95
DIE CAST HOOPS
SC-1206TT - 12”/6 Lug Tom.1 pk. 19.50
Custom designed top and bottom die cast hoops feature reinforced tension points, large snare gates, and highly polished chrome finish. Slightly oversized, our hoops allow snare drums to project without choking or restricting the head in any way. SC-1308BSD - 13”/8 Lug Batter Side. 1 pk. 79.95 SC-1308SSD - 13”/8 Lug Snare Side. 1 pk. 79.95 SC-1410BSD - 14”/10 Lug Batter Side. 1 pk. 79.95 SC-1410SSD - 14”/10 Lug Snare Side. 1 pk. 79.95
SC-1306TT - 13”/6 Lug Tom.1 pk. 21.95 SC-1308BS - 13”/8 Lug Batter Side. 1 pk. 22.50 SC-1408BS - 14”/8 Lug Batter Side. 1 pk. 21.95 SC-1410BS - 14”/10 Lug Batter Side. 1 pk. 20.95 SC-1508TT - 15”/8 Lug Tom.1 pk. 23.95 SC-1608TT - 16”/8 Lug Tom.1 pk. 20.95 SC-1808TT - 18”/8 Lug Tom.1 pk.22.95
DRUM KEYS & TONE CONTROLS
KEY RODS/TENSION RODS
SC-4244 - Standard Drum Key - 1/4” socket fits all standard drum tension rods. 1 pk. 3.75
(7/32” DIA.)
SC-4245 - High Torque Drum Key Fits all standard tension rods. Larger shaft and handle section for more tension. 1 pk. 4.50 SC-4248 - Speed Key - Crank-shaped key to speed head changes. 1/4” socket. 1 pk. 6.50
SC-4B - 2” (51mm) Tension Rods. 6 pk. 4.50
SC-RLW - Ratchet Lug Wrench 1 pk. 17.50 SC-4235 - External Tone Control Hoop-mount tone control device attaches to virtually any tom tom or snare drum. 1 pk. 15.95
SC-LG - Lug Nuts - Swivel nuts fit most bass drum tension lugs. (6mm dia.) 12 pk. 4.50
SC-4400 - Internal Tone Control Mounts inside drum with adjustment on exterior. Exerts pressure by felt pad against head. 1 pk. 15.95
SC-SSW - ABS Tension Washers 10 pk. 9.95
SC-4E - 2-3/8” (58mm) Tension Rods. 6 pk. 4.50
SC-4C - 1-5/8” (41mm) Tension Rods. 6 pk. 4.50 SC-4J - 1-3/8” (35mm) Tension Rods. 6 pk. 4.50
SC-LN - Small Lug Nuts - Swivel nuts fit most tom tom tension lugs. (7/32” dia.) 12 pk. 4.50
SC-11C - Tension Rod Washers 24 pk. 5.95
Snare Drum Snares & Parts
SC-016A
SC-216A SC-1316
SC-360A
SC-4471 SC-4459
SC-4467
SC-4467L
SC-363E
WIRE SNARES (SNARE DRUM SNARES) DESCRIPTIONS
SC-4385
SC-STO
• INCHES - This designates the diameter drum the snare is designed to fit. It may not be the actual length of the snare wire assembly.
SC-PTO
• STRANDS - This is the amount of snare wires on each snare. • Normal Fit - Most snares do not fit past the edge of the snare side drum head. (This includes all Gibraltar snares except SC-4467L and SC-363E.) • Extended Length - Some snare drums utilize snares which fit over the edge of the snare side hoop. The SC-4467L will fit most drums with this feature. • Special Snares -The SC-363E fits Ludwig Super Sensitive Snare drums with non-individually adjustable snare wire systems and a Yamaha model which utilizes split snares.
SC-SC SC-SSC
5
Note: Gibraltar snares are designed to fit many manufacturers' snare drums. They are made to fit snare drums ranging from 10" to 14" in diameter and are primarily designed for Jazz, Rock, and concert performance applications. Gibraltar snares are not designed for super high-tension applications, such as field/marching corps or similar performance situations.
SNARE DRUM SNARES
SC-SBE SC-NSC
SNARE DRUM PARTS
Quality chrome-plated coiled steel wire. Trenched butt plates provide even tension and contact with head for improved response. SC-016A - 10”/16 strand. 1 pk.
9.95
SC-216A - 12”/16 strand. 1 pk.
9.95
SC-1316 - 13”/16 strand. 1 pk.
9.95
SC-360A - 13”/12 strand. 1 pk.
9.95
SC-4459 - 14”/16 strand. 1 pk.
10.95
SC-4467 - 14”/20 strand. 1 pk.
10.95
SC-4467L - 16”/20 strand with extended length. Fits 14” snare. 1 pk. 10.95 SC-363E - 14”/20 strand (split 10/10). 1 pk. 24.95 SC-4471 - 14”/42 strand. 1 pk.
19.95
SC-4385 - Snare Drum Throw-Off Snare strainer with full throw-off, fine tuning adjustment with butt end and screws. 1 pk. 25.95 SC-PTO - Piccolo Throw-Off Throw-off for short drums. 1 pk. 20.95 SC-SC - Snare Cord - Tight weave nylon cord with double laminated ends. 6 pk. 4.95
SC-STO - Deluxe Snare Throw-Off Quick-release throw-off mechanism allows easy adjustment of snare tension. 1 pk. 30.50 SC-SSC - Metal Snare Cord 4 pk.
6.50
SC-SBE - Deluxe Snare Butt End Butt end assembly with deep channel and high tension drum key bolts eliminates snare slippage. 1 pk. 7.95 SC-NSC - Nylon snare strip. 4 pk.
6.95
Bass Drum Parts & Accessories SC-BPL SC-4402 SC-BPS
SC-BPF
SC-BS4
SC-BDPM SC-BF SC-BS5
SC-DPP
SC-BS2 SC-22M
SC-BDTR/L SC-BDKR/L
SC-BDKR/S SC-22BK SC-BDTR/S
SC-CH
6 WOOD BASS DRUM HOOPS 8-ply, all-maple construction finished in natural or black lacquer. Natural Lacquer SC-18M - 18” Hoop. 1 pk.
82.95
SC-20M - 20” Hoop. 1 pk.
92.95
SC-22M - 22” Hoop. 1 pk.
102.95
SC-24M - 24” Hoop. 1 pk.
112.95
Black Lacquer SC-18BK - 18” Hoop. 1 pk.
82.95
SC-20BK - 20” Hoop. 1 pk.
92.95
SC-22BK - 22” Hoop. 1 pk.
102.95
SC-24BK - 24” Hoop. 1 pk.
112.95
SC-BPL - Bass Drum Vinyl Beater Pad - Leather-like vinyl pad mounts to drum head. 4 pk. 10.50 SC-BPS - Bass Drum Suede Beater Pad - Suede pad to protect bass drum head. 4 pk. 9.95
SC-BPF - Felt Impact Pad - Adhesive felt pad mounts on drum head. 4 pk. 4.50
SC-BDTR/S - Bass Drum T-Handle Tension Rods - 4-1/4” (108mm) long x 7/32” dia. 4 pk. 15.95
SC-BF - Bass Drum Felt Strip A 2-1/4” wide felt strip mounts inside drum head. Fits up to 26” drum. 2 pk. 5.95
SC-BDKR/L - Bass Drum Key Rod 4-3/16” (106mm) long x 6mm dia. 4 pk. (See chart on pg. 4 for additional info.) 7.50
SC-DPP - Double Pedal Pad - The same material used on our SC-BPL for use with double pedals. 2 pk. 5.50
SC-BDKR/S - Bass Drum Key Rod 4-3/16” (106mm) long x 7/32” dia. 4 pk. 7.95
SC-BDPM - Bass Drum Platform Mount - Fits 18” and 20” bass drums. It comes with a clamp that attaches the device to a bass drum’s (batter side) counter hoop. This helps prevent movement of any kind. This mount raises a bass drum 2” off the floor. 1 pk. 39.95 SC-BDTR/L - Bass Drum T-Handle Tension Rods - 4-1/4” (108mm) long x 6mm dia. 4 pk. 9.95
SC-CH - Bass Drum Claw Hook4 pk. 13.50 SC-4402 - Bass Drum Anchor Attaches to the bottom of front counter hoop to prevent bass drum “walking.” Dual reversible tips. 1 pk. 16.95 SC-BS4 - Bass Drum Spurs Telescopic bass drum spurs. Angle-adjustable bracket is included. 1 pk. 56.95
SC-BS2 - Lightweight Bass Drum Spurs - A set of simple and lightweight spurs. Solid steel rod with rubber tips mount into cast receptacles. 1 pk. 35.95 SC-BS5 - Medium Weight Bass Drum Spurs - Strong yet lightweight spur set. Perfect for maximum support without overkill. 1 pk. 61.95
PEDAL PARTS BASS DRUM PEDAL BEATERS Hardened steel rods with a flat side to prevent slipping. Solid felt (1-3/4” high), lacquered wood dual surface and plastic beaters. SC-LBDB - Lightweight Bass Drum Beater - Dual Surface beater with felt and plastic option. Extra lightweight for faster response. 1 pk. 16.95
NEW
Bass Drum Pedal SC-LBDB
High-Use Bass Drum Pedal Parts
NEW
SC-DSAB SC-4071
SC-4007
SC-BSW SC-DSB SC-0055 SC-0009
SC-2000
SC-3261 SC-3262 SC-TS SC-3030L SC-GLO SC-15A
SC-3030R
SC-15F
SC-3029
SC-15C
SC-0052
SC-0053
BASS DRUM TENSION RODS 6mm - Fits Pearl (prior to 1995), CB, Mapex, and many generic Taiwan-made drums. 7/32" - Fits most other manufacturers' drums with the exception of Sonor and D.W. Fits Pearl bass drums made after 1995. Fits D.W. bass drums prior to 1996 production.
SC-0062
SC-BDHG
SC-0128
SC-0129
SC-0121
Bass Drum Tension Rod Lengths - All Gibraltar bass drum T-Rods and key rods are 4-1/4" (108mm) long. They fit most manufacturers' bass drums, as previously noted, with the exception of drums which have extended space between the hoop and lug receptacle. (We recommend that you measure this space before purchasing.)
SC-2035
Note: At this time, Gibraltar does not manufacture tension rods which fit Sonor or D.W. drums.
7 SC-DSAB - Dual Surface Adjusting Beater. 1 pk. 26.95
SC-15C - Generic Spring. 2 pk.
SC-DSB - Dual Surface Beater. 1 pk.
24.95
SC-3261 - Solid White Felt. 1 pk.
24.95
SC-GLO - Gibraltar Pedal Lubricant Perfect for use on hi-hat and bass drum pedals to protect bearings and eliminate squeaks. 1 oz. bottle 3.50
SC-3262 - Solid Wood Ball. 1 pk.
11.50
SC-BSW - Bass Drum Beater Shaft Weight - Fits most bass drum beaters. 2 pk. 14.95 SC-TS - Bass Pedal Toe Stop - Fits all Gibraltar and many manufacturers’ pedal boards. 2 pk. 11.95 Drum Pedal Parts - Heavy-duty replacement springs/straps for most popular style pedals. SC-15F - Universal Spring. 2 pk.
12.95
SC-15A - Universal Pedal Strap. 4 pk. 14.95
4.95
SC-3030L - Left Square Connecting Shaft w/U-Joint. Assembly comes with 2 SC-0129 6mm Key Screws. 1 pk. 36.95
SC-0062 - Heel Plate Screw Kit. 2 pk. 3.95 SC-0053 - Pedal Spring Tension Assembly. 2 pk. 5.95
SC-3029 - Center Connecting Shaft Housing. 1 pk. 10.95
SC-0052 - Pedal Spring Assembly. 2 pk.
SC-BDHG - Bass Drum Hoop Guard - Protects lacquer bass drum hoops from bass pedal hoop clamp. 2 pk. 5.95
SC-0009 - 8mm Wing Screw. 5 pk.
HIGH-USE PEDAL PARTS
SC-0128 - 5mm Key Screw for U-Joint. 4 pk. (Not shown)
4.95
SC-4071 - Prowler Chain w/Master Link. 1 pk. 15.95
SC-0129 - 6mm Key Screw for SC-3030 R and L Connecting Shaft. 4 pk.
4.95
SC-4007 - Avenger II, Intruder II Chain Assembly. 1 pk. 20.95
SC-0121 - 8mm Key Screw for Beater Hub. 4 pk.
3.95
SC-3030R - Right Square Connecting Shaft w/U-Joint. Assembly comes with 2 SC-0129 6mm Key Screws. 1 pk. 36.95
SC-2035 - Rock Plate Screw Kit. 1 pk. 3.95
SC-2000 - Die Cast Pedal Hinge w/Screws. 1 pk. 7.95
5.50
SC-0055 - Hoop Clamping Tension Screw. 2 pk. 4.95
5.95
Tom Tom Mounting Systems L-ROD Style Mounting Systems L-RODS
L-ROD PLATFORM WITH POST
L-ROD PLATFORMS WITH CLAMP
SC-SPC
L-ROD BALLS SC-LBS 9.5mm
SC-LBM 10.5mm
SC-LBL 12.7mm
SC-SP
L-RODS SC-LR 9.5mm
SC-LRM 10.5mm
SC-DP
10”
SC-LRL 12.7mm
16”
SC-DPC Use with L-rod balls.
SUPER L-RODS SC-SLR 10.5mm
1”
SC-DWLR 12.7mm
1”
Use with L-rod balls SC-SLRM/ SC-SLLRM SC-1BDB
L-ROD BALL/ARMS SC-BALRM 10.5mm
SC-BALRL 12.7mm
SC-LDML
L-ROD TOM MOUNTS FLOOR TOM LEGS
SC-STL4
SC-TL2 SC-TL1A - 9.5mm Legs SC-STL3
Use with L-rod tom mounts.
SC-STL2
SC-TL2A - 10.5mm Legs
8 L-ROD TOM TOM MOUNTING SYSTEMS - Choose from several designs to fit your specific setup. 9.5mm, 10.5mm and 12.7mm L-Rods work with our SC-TL2, SC-STL2 and SC-STL3 tom mounts and many manufacturers’ mounts. (See chart on the next page.) L-Rod Balls - These L-rods fit various manufacturer’s tom mounting systems (see “Tom Mounting Systems Glossary” page 9). They can be mounted in any of the L-rod platforms with post or with clamp and in many manufacturers’ original tom mounting systems. SC-LBS - Ball with 9.5mm rod. 1 pk. 10.95 SC-LBM - Ball with 10.5mm rod. 1 pk. 10.95 SC-LBL - Ball with 12.7mm rod. 1 pk. 10.95 SC-LR - Small L-Rod - Tom/cowbell attachment arms fit directly in multi-
clamp. 12mm x 9.5mm dia. (Fits SC-STL2 and SC-TL2 mounts.) 2 pk. 11.95 SC-LRM - Medium Knurled L-Rod 12mm x 10.5mm dia. (Fits SC-STL2 and SC-STL3 mounts.) 2 pk. 12.95 SC-LRL - Large Knurled L-Rod 12mm x 12.7mm dia. 2 pk. 13.95 SC-SLR - Super Knurled L-Rod 26mm to 10.5mm. Fits directly in a multi-clamp. Extra large dia. for strength and stability. For use with our SC-STL3 heavy-duty tom bracket. 1 pk. 15.95 SC-DWLR - 26.5mm to 12.7mm L-Rod - This super L-Rod fits D.W., Gibraltar and some other manufacturers’ L-Rod tom tom brackets. 1 pk. 17.95 SC-BALRM - Ball Arm L-Rod Mount (Medium) - All-in-one, ready-to-go 10.5mm L-rod with ABS base with adjustable angle ball, mounted on 7/8” dia. vertical post. 1 pk. 40.95
SC-BALRL - Ball Arm L-Rod Mount (Large) - Similar to the SC-BALRM except L-rod is 12.7mm dia. 1 pk. 40.95 L-Rod Platforms - Designed to be used with any L-rod ball mount. Gibraltar’s L-rod platforms allow tom mounting via bass drums and or all types of stands and rack systems. SC-SP - Single L-Rod Platform Single L-rod platform with 1” dia. vertical post (for single tom mounting). 1 pk. 39.95 SC-DP - Double L-Rod Platform Double L-rod platform with 1” dia. vertical post (for double tom mounting). 1 pk. 58.95 SC-1BDB - 1” Diameter Tom Tom Bass Drum Bracket -The SC-1BDB mounts on bass drum and accepts 1” dia. tubes. Works with Gibraltar tom mounting posts and other manufacturers’ mounting posts with 1” dia. shaft. Memory lock included. 1 pk. 35.95
SC-SLRM - Single L-Rod Tom Mount - Designed to easily mount a single tom, percussion instrument or trigger device from an existing stand. L-Rod with ball adjustment gives incredible adjustability. L-Rod is 10.5mm in diameter. Holds up to a 14” x 14” tom. 1 pk. 42.50 SC-SLLRM - Super Large L-Rod NEW Mount- (Not Pictured) - Same as SC-SLRM, but with 12.7mm L-rod ball. 1 pk. 42.50 SC-LDML - L-Rod Tom Memory LockFits knurled L-Rods from 9.5mm to 12.7mm in dia. Made to work with SC-STL2 & STL3 mounts, but will work with other manufacturers’ L-Rod mounting systems. 1 pk. 7.95 SC-STL2 - Heavy-Duty Tom Bracket with Memory Lock - Accepts 9.5mm to 12.7mm L-Rods. Perfect for use with R.I.M.S.™ and Gibraltar TSS mounting systems. Similar to SC-STL3 but with two drum key bolts. 1 pk. 33.95
Hex Style System
7/8” Dia. Style Mounting Systems PLATFORM MOUNTABLE 7/8” TOM TOM ARMS
BASS DRUM MOUNTABLE 7/8” TOM TOM ARM
700HA
HEX ROD MOUNTS
7/8” TOM TOM MOUNTS
SC-BAHR
SC-670TB
SC-BA78EL
6”
6”
SC-670BB
6” SC-750TB
10” SC-BA78 13.8”
TOM MOUNTING SYSTEMS GLOSSARY 7/8" Diameter Mounts - Fits most Pearl, CB, Mapex, and other generic Taiwan-made drums.
10”
Hex Rod Mounts - Fits some Yamaha drums and Yamaha electronic pads. L-Rod Mounts - Fits some D.W., GMS, Gretsch, Legend, Premier, Noble & Cooley, Ludwig, and Tama models (check L-Rod diameter prior to purchase.)
L-ROD DIAMETERS 9.5mm - Fits most cowbells, percussion mounts, floor tom brackets, old Ludwig models, and Gibraltar SC-STL2 and SC-STL3 tom brackets.
SC-78UA
10.5mm - Fits most contemporary L-Rod mounts for Legend, GMS, Noble & Cooley, Premier, Ludwig, and Tama. Fits SC-STL2 and SC-STL3 brackets and some Yamaha electronic trigger pads.
6”
12.7mm - Fits D.W. and Gretsch brackets and Gibraltar SC-STL2 and SC-STL3 brackets. SC-PM 10”
GIBRALTAR “ULTRA ADJUST” SYSTEM
TOM BRACKET Gibraltar tom brackets are designed to fit primarily on Gibraltar GTTS™ mounting systems (on metal plate). If you plan to mount tom brackets directly on a drum shell, you may need longer mounting screws, depending on the thickness of your shell.
BASS DRUM BRACKET/RECEPTACLES These are designed to be mounted on a bass drum shell and come with extended length mounting screws, washers, and fasteners to accommodate most drum shell thicknesses.
16”
TOM ARMS No other drum company offers as many options for mounting a tom tom as Gibraltar. We suggest you consider the following points before purchasing a Gibraltar tom arm: • Size and weight of drum to be mounted. • Positioning requirements (fixed or moveable). • Attachment point of tom arm (from stand, directly from rack, from bass drum, etc.). • Cost of all parts needed to complete mounting system (example: cymbal stand, multi-clamp, tom arm, tom bracket). Choose the most cost effective, physically-secure system.
SC-4429 1” SC-STL3 - Super Tom Mount with Wing Screw and Memory Lock Similar to the SC-STL2, this L-rod tom mount is tightened via a large wing screw. It also comes with a memory lock which fits on L-rods. Fits 9.5mm to 12.7mm L-rods. 1 pk. 33.95 SC-STL4 - L-Rod Tom Mount Chrome L-Rod tom mount is heavy duty yet small in size and lightweight. Fits 9.5mm to 12.7mm L-rods. 1 pk. 34.95 SC-TL2 - Tom/Floor Tom Bracket Drum mount bracket to fit 9.5mm or 10.5mm tom arms or floor tom legs. Wing screw/eye bolt adjustments. 1 pk. 14.50 SC-SPC - Single L-Rod Platform with Clamp - Single L-rod platform with adjustable multi clamp. (Multi-clamp fits up to 1” dia. post.) 1 pk. 36.95 SC-DPC - Double L-Rod Platform with Clamp - Double L-rod platform with adjustable multi clamp. (Multiclamp fits up to 1” dia. post.)1 pk. 50.95
SC-TL1A - 9.5mm Floor Tom Legs 21” angled legs (without bracket). Set of 3 (9.5mm) 20.95
SC-4429 - Stabilizer Platform Three-way clamp accepts 1/2” through 1” dia. tubes. 1 pk. 35.95
SC-TL2A - Floor Tom Legs - 21” angled legs (without bracket).Chromeplated. Set of 3 (10.5mm) 22.95
SC-78UA - 7/8” Diameter Tom Arm with Ultra Adjust - Gibraltar’s exclusive “Ultra Adjust” system adds additional flexibility to a standard 7/8” dia. tom arm. Recommended for use with various manufacturers’ rack systems. 1 pk. 55.95
7/8” DIAMETER TOM TOM MOUNTS - Use 7/8” dia. pipe-style arms. Both bass and tom brackets accept 7/8” pipe receptacles. SC-700HA - Tom Arm - Double 7/8” dia. arms joined by a multi-angle ratchet adjustment. 1 pk. 27.95 SC-BA78 - Ball Arm 7/8” dia. Tom Arm - All-in-one, ready-to-go 7/8” dia. tom arm with ABS base with adjustable angle mounted on a 1/2” dia. vertical post. Recommended for use with various manufacturers’ rack systems. 1 pk. 40.95
SC-BA78EL - Ball Arm 7/8” dia. Tom Arm with Extended Height Capabilities - Same mount as SC-BA78 with longer vertical arm. Recommended for use when mounting in SC-670BB or original manufacturers’ bass drum mount. 1 pk. 46.95 SC-PM - Platform Mount - Perfect match for cymbal boom arms. Mounts two or more items from racks or stands. 1 pk. 37.95 SC-670TB - Tom Bracket - Single 7/8” dia. receptacle. 1 pk. 20.95 SC-670BB - Bass Bracket - Double 7/8” dia. receptacle. 1 pk. 37.95
HEX ROD TYPE TOM TOM MOUNTS SC-BAHR - Ball Arm with Hex Rod All-in-one, ready-to-go hex rod tom arm with ABS ball with adjustable angle mounted on a 7/8” dia. vertical post. Recommended for use with various manufacturers’ rack systems or original manufacturers’ tom platform mounts. 1 pk. 39.95 SC-750TB - Tom Bracket - Single hexagonal rod receptacle. 1 pk. 15.95
9
Gibraltar Tom Suspension System
Cymbal Arms & Mounting Systems SC-4425A-1
NEW
SC-MB
17.3”
17.3”
MS-TC
Shown in photo: SC-GTS 12/6 Tom mount not included 3/4” SC-EA100
SC-PM
NEW Fits 3/4” dia. cymbal arm
NEW SC-XHAT
13” SC-BJEA Shown in photo: SC-GTS8/4
MS-XLR
SC-GCA 1”
10 GIBRALTAR TOM SUSPENSION SYSTEM The GTSS is a proven mounting system for tom toms from 8” to 16” in diameter. This system can also be used to mount snare drums. While the GTSS is new to the Gibraltar accessory line, its design has been around for 20 years. The GTSS not only is an excellent mounting system, it actually improves the sound of a drum. Available models and sizes:
Part No. SC-GTS 8/4 SC-GTS 8/5 SC-GTS 10/5 SC-GTS 10/6 SC-GTS 12/5 SC-GTS 12/6 SC-GTS 13/6 SC-GTS 14/6 SC-GTS 14/8 SC-GTS 16/6 SC-GTS 16/8
Description 8” / 4 Lug 8” / 5 Lug 10” / 5 Lug 10” / 6 Lug 12” / 5 Lug 12” / 6 Lug 13” / 6 Lug 14” / 6 Lug 14” / 8 Lug 16” / 6 Lug 16” / 8 Lug
Retail $42.95 $42.95 $44.95 $46.95 $48.95 $49.95 $52.95 $54.95 $58.95 $62.95 $64.95
Note: GTSS is not available for 15” diameter drums. Availability may vary from country to country
SC-MB - Mini Boom (Hideaway Boom) - This small boom doubles as a straight cymbal arm or a cymbal boom arm. 3/4” dia. vertical shaft. 1 pk. 49.95 SC-4425A-1 - Straight Cymbal Arm 3/4” dia. shaft by 17.3” (long). 1 pk. 36.95 SC-BJEA - Ball Joint Extension Arm - Allows cymbal arm to be mounted in ball arm socket. Can be used on Gibraltar or other manuffacturers’ L-rod platform mounts. 1 pk. 27.95 SC-XHAT - Mini X-Hat Attachment
NEW -Mounts on any cymbal tilter to allow mounting of extra hi-hats. 1 pk.
39.95
SC-GCA - Grabber Cymbal Arm Straight cymbal arm mounted to a geared ratchet adjustment and attached to a basic grabber clamp (SC-BGC). 1 pk. 45.95
SC-EA100 - Extension Arm Universal extension arm with 360˚ ratchet plus a multi-clamp attachment. Allows infinite positioning for almost any piece of drum hardware. (1” dia. tube) 1 pk. 40.95 SC-PM - Platform Mount - Perfect match for the SC-4425MB. Mounts two or more items from one rack or stand multi-clamp. 1 pk. 37.95 MS-TC - Tri-Cymbal Mounting System - Mounts three cymbals in any way imaginable. Includes (2) NEW SC-CLRA Cymbal L-rod Attachments (see page 12), (1) SC-TPBA Two-Point Boom Attachment and (1) SC-LBRA Long Boom Ratchet Assembly (See page 11). 1pk. 119.50 MS-XLR - X-Hat/L-rod Mounting System - Combines the mounting of a 9707X auxiliary hat with an additional SC-PLRA Percussion L-rod NEW Attachment (See page 12). 1pk. 115.50
D OVE IMPR SC-CBS SC-SBS SC-4425B-1
Gibraltar’s exclusive 360˚ cymbal tilter mechanism for infinite positioning. 17.3” 13.8”
13.8”
7/8”
SC-RMH
NEW
SC-LBRA
3/4” 7/8”
SC-SBRA SC-4425MB
SC-TPBA
NEW
Memory Locks
SC-BCSA
SC-ML34 SC-ML78 10” SC-CSA
SC-ML1 7/8”
11 SC-4425B-1 - Cymbal Boom Arm - 7/8” dia. post with a cymbal boom arm that is unweighted, knurled and fully adjustable. 1 pk. 49.95 SC-CBS - Cymbal Boom Smooth The same boom assembly as the SC-4425B-1 with smooth boom arm. Makes quick position adjustments easier. 1 pk. 44.95 SC-RMH - Replacement Microphone Holder - Left cast assembly for cymbal arms. Converts cymbal tilter to microphone holder. Comes with two thread sizes to fit most manufacturers’ mic clips (holders). SC-RMH fits on Gibraltar SC-4425B-1, 4425MB, GCA, CBS, 4425A-1, and MB cymbal arms. 1 pk. 14.95
SC-CSA - Cymbal Stacking Attachment - Allows two cymbals (of any size) to be placed on top of each other with approximately 8” of clearance between them. Mounts on most 6mm and 8mm cymbal stand tops. (No special screws or mounting pieces required.) 1 pk. 35.95
SC-4425MB - Mini Cymbal Boom Arm - Perfect for mounting splash, small effect cymbals or bar chimes. 10” vert. shaft with 14” horiz. shaft long enough to position small cymbals but short enough to stay out of the way. Smooth cymbal arm. 7/8” dia. shaft. 1 pk. 39.95
SC-BCSA - Boom Cymbal Stacking Attachment - Fits any manufacturer’s cymbal tilter. Fully Adjustable. 1 pk. 65.50
SC-SBS - Super Boom Small - 20” unweighted boom with 360˚ cymbal tilter. 3/4” dia. vertical shaft. The Gibraltar super boom gets a thicker tube wall for additional strength when being clamped. 1 pk. 63.50
NEW
SC-SBRA - Short Boom Ratchet
NEW Arm - Knurled 12.7mm ratchet arm mounts on any cymbal boom assembly. 1 pk.
19.50
SC-LBRA - Long Boom Ratchet Arm - Knurled 12.7mm ratchet arm NEW mounts on any cymbal boom assembly. 1 pk. 21.50 SC-TPBA -Two-Point Boom - 3/4" NEW dia. Vertical shaft. 17.3" long. Fits most cymbal stands and multi clamps 1 pk. 29.50
MEMORY LOCKS SC-ML34 - 3/4” dia. 4 pk.
19.95
SC-ML78 - 7/8” dia. 4 pk.
19.95
SC-ML1 - 1” dia. 4 pk.
19.95
Multi-Clamps & Spanner Parts
NEW
SC-BGC
SC-SSMC
SC-4425G
NEW SC-LRAC
SC-CLRA
SC-SUGC SC-PLRA GPR-SSS
SC-UGC
SC-PUGC
SC-4429
SC-UGC
12
EW SC-PLRA - Percussion L-rod
N SC-4425G - Standard Grabber Clamp - Double clamp assembly. Accepts 1/2” through 1” dia. 1 pk. 28.50
GPR-SSS - Super Spanner System 46” curved bar connects to your existing cymbal stands via two EW SC-GRSSMC super multi-clamps. N Total clamps included are: (4) SC-GRSSMC, (2) SC-GRSMC. 1 pk. 214.95
Attachment - Grabber multi-clamp with two L-rod adjustments can mount on any cymbal arm or L-rod. Fully Adjustable 9.5mm to 10.5mm eye bolts. 1 pk. 35.95 SC-LRAC - L-rod Adjustment Clamp Grabber multi-clamp with L-rod that allows mounting of bells, blocks and other accessories to a set up. Fully Adjustable. 1 pk. 34.95 SC-CLRA - Cymbal L-rod
W Attachment - Grabber multi-clamp
NE SC-PUGC - Pearl-Type Grabber Clamp - Angled center post with a rotating clamp at each end. 1 pk. 38.50 SC-BGC - Basic Grabber Clamp Economical version of SC-4425G without hinged clamps. 1 pk. 24.95
with two L-rod adjustments can mount on any cymbal arm or L-rod. Fully Adjustable 9.5mm to 10.5mm eye bolts. 1 pk 35.95 SC-UGC - Universal Grabber Clamp - Double clamp accepts 5/8” through 1-1/4” dia. arms. 1 pk. 47.95
SC-4429 - Stabilizer Platform Three-way clamp accepts 1/2” through 1” pipe dia. 1 pk. 34.95 SC-SSMC - Super Spanner Multi-Clamp NEW Double quick-release clamp that secures spanner bars and accessories at a right angle to each other. Each side of the multi-clamp accepts from 5/8” to 1-1/4” dia. tubes. 1 pk. 44.50 SC-SUGC - Super Universal Grabber Clamp - Features double multi-clamps which accept 5/8” through 1-1/2” dia. arms and rack tubes. The multi-clamp gripping surface has been made 2-1/2 times larger (same multi-section as the SC-GRSSMC). 1 pk. 55.95
WING NUTS/CYMBAL SLEEVE SC-13G - Small (6mm). 5 pk. SC-13E - Medium (8mm). 5 pk. SC-13P - Large (8mm). 5 pk.
6.95 6.95 8.95
Cymbal Sleeves - Sleeves fit over threaded portion of cymbal mount to protect cymbals. Several styles: SC-PC698 - Straight (6mm). 12 pk. 3.95 SC-8CS - Straight (8mm). 12 pk. 4.50 SC-19A - Flanged base (8mm) for Gibraltar 9500 Cymbal tilters (longer shaft) 4 pk. 5.50 SC-19B - Flanged base (8mm). 4 pk. 5.50
Cymbal Stand Parts & Rubber Feet SC-19A
Hi-Hat Parts & Accessories
SC-CFL-4
SC-CLF-4
SC-19B
SC-DC
SC-CFS-4
SC-4420
SC-13P SC-4421 SC-MCW SC-8CS SC-13E SC-13G
SC-4421D
SC-PC698
NEW
SC-TCWN/6
SC-4980J
SC-CT SC-HF-4
SC-4420S
SC-TCWN
SC-RMH
SC-1655-4 SC-PC07
SC-PC09
SC-PC08
SC-RP171
SC-PC13
13 SC-TCWN/6 - 6mm T-Style ABS Cymbal Wing Nut - Same design as the SC-TCWN. Fits in place of 6mm cymbal wing screw. 4 pk. 3.95 SC-TCWN - 8mm T-Style Wing Nut - ABS wing screw and cymbal shaft protector all in one. 4 pk. 3.95
CYMBAL FELTS SC-CFS-4 - Small 3/4” thick. 4 pk. SC-CFL-4 - Large 1-1/2” thick. 4 pk.
2.95 3.50
SC-MCW - Metal Cymbal Washers Used on cymbal tilters. Fits 8mm. 4 pk. 4.50
NEWSC-CT - Auxiliary Cymbal Tilter Full cymbal tilter assembly fits on most cymbal ratchet arms for additional cymbal mounting. 8mm tilter. 1/4” tension rod head can be used to tighten once set at desired position. 1 pk. 23.95 SC-RMH - Replacement Microphone Holder - Left cast assembly for cymbal arms. Converts cymbal tilter to microphone holder. Comes with two thread sizes to fit most manufacturers’ mic clips (holders). SC-RMH fits on Gibraltar SC-4425B-1, 4425MB, GCA, CBS, 4425A-1, and MB cymbal arms. 1 pk. 14.50
RUBBER FEET SC-PC07 - Fits all 9000 Series Gibraltar stands. 3 pk.
6.50
SC-PC08 - Rubber Feet for Elliptical Legs - Fits all 7000 Series Gibraltar stands. 3 pk. 8.95
SC-PC09 - Round Gibraltar Rubber feet - Fits 9500 Gibraltar stands and other manufacturers’ double braced stands. 3 pk. 9.50 SC-PC13 - Fits CB 3000 and various entry level stands. 3 pk. 4.95
SC-DC - Hi-Hat Drop Clutch Disengage and drop top cymbal by hitting clutch with drumstick. Step on the pedal and clutch attaches itself at original position. (8mm rods) 1 pk. 23.95
HI-HAT CLUTCHES
SC-4980J - Hi-Hat Cymbal Seat Fits Gibraltar and most professional hihat stands w/1” or 5/8” tube. 1 pk. 7.50
SC-CLF-4 - Clutch Felts. 4 pk. 2.95
SC-HF-4 - Cup Felts. 4 pk.
SC-4421 - Universal - Fits CB Percussion 3207 and most inexpensive stands. (6mm rods) 1 pk. 12.50
SC-1655-4 - Cup Washer. 4 pk. 5.95
SC-4421D - Standard - Fits Rock Hardware by Gibraltar and most moderately priced stands. (8mm rods) 1 pk. 11.95 SC-4420 - Professional Fits Gibraltar and most professional stands. (8mm rods) 1 pk. 14.95
3.95
SC-4420S - Super Clutch - Utilizes our “Super Grip” clamping mechanism which will not scar the hi-hat pull rod. Fits 8mm rod. 1 pk. 16.95 SC-RP171 - Hi-Hat Attachment Clamp - Attaches to bass drum counter hoop to support the hi-hat when used with a double bass setup. 1 pk. 33.95
Hand Percussion Mounting Systems
SC-BST SC-SM
6” 10 ”
SC-BM 13.8”
SC-BDCM
SC-GM 1” The SC-BST comes with bolt kit to fit most makes of professional bongos.
SC-CLW
SC-CBPM
SC-DJM
14 SC-BM - Block Mount Allows for mounting of various wood blocks. Mount expands from 6” to 10” to fit different size blocks. 1 pk. 49.95
SC-SM - Shakere Mount Allows for mounting of most Shakeres. Shakeres can be played while mounted. 1 pk. 45.95
SC-GM - Guiro Mount - Allows for mounting of most Toca and other Guiros via an adjustable mounting system. Guiro can be played while mounted. 1 pk. 37.95
SC-DJM - Djembe Mounting Kit for Double Conga Stand - Fits Gibraltar and most other manufacturers’ double conga stands. Allows mounting of Djembe drum on double conga stand. 1 pk. 29.95
SC-CBPM - Cowbell Bass Pedal Mount - Allows mounting of most brands of cowbells, blocks or tambourines to an adjustable floor stand, which also accepts most brands of bass pedals. 1 pk. 55.95
SC-BST - Bongo Stand Top - The top section of 9516 Deluxe Bongo Stand. Allows sturdy mounting of bongos to rack systems or double conga stands. Fits 1/2” to 1-1/2” dia. bars. 1 pk. 50.50
SC-BDCM - Bongo Dbl. Conga Stand Mount - Attaches to any dbl. conga stand to allow secure mounting of bongos w/the same top as the Gibraltar 7516 bongo stand. 1 pk. 105.50 SC-CLW - Conga Lug Wrench Heavy-duty ratchet assembly with a 1/2” socket which fits most manufacturers’ congas and bongos for easy, accurate tuning. 1 pk. 17.95
SC-SAT
SC-MAT
SC-AM4
9.5mm
SC-101 SC-AM1
NEW
SC-4425D-1 9.5mm
GAB-20
SC-TLR GAB-12
SC-TC SC-DTM SC-EB
SC-4795
15 SC-101 - Tambourine Holder Attaches to 9.5mm or 10.5mm rod to mount most tambourines. 1 pk. 16.50 SC-MAT - Medium Accs. Table With Mount - Attaches to a cymbal stand or rack bar. 12” x 18”, with 1” high borders and padded surface. 90.50 SC-SAT - Small Accs. Table With Mount - Attaches to a cymbal stand or rack bar. 12” x 12”, with 1” high borders and padded surface. 80.50 SC-TC - Heavy-Duty Triangle Clip Clothespin-style clamp for attaching triangle. Vinyl coated tip for a secure grip. 1 pk. 10.50 SC-TLR - Triangle L-rod - 9.5mm to NEW 10.5mm L-rod with pre-installed nylon cord can be mounted on most multi clamps to allow better mounting of triangles. 1 pk. 9.50
SC-4425D-1 - Cowbell/Tom Arm 7/8” dia. post topped with an L-Rod for mounting cowbells and other accessories. L-Rod also fits some tom mounts and electronic drums. 5/16” (9.5mm) dia. L-Rod accepts most cowbells, blocks, tambourines, etc. 1 pk. 33.95 SC-DTM - Double Mini Timbale Mount - Fits 6”, 8” or 10” Toca mini timbales and holds two cowbells, woodblocks, etc. Clamps onto existing stand via rack style cast multi-clamp fitting. Fits 1/2” to 1-1/4” dia. stands. 1 pk. 64.50
SC-AM4 - Four-Post Mount We’ve added a cast multi-clamping fixture to this popular mounting device, which guarantees secure and even mounting to cymbal stands and other fixed vertical tubes. Holds up to eight accessories top or bottom. Use with other accessory holders (SC-CA, SC-WCA, etc.) to expand mounting possibilities. 1 pk. 60.95 SC-AM1 - Single Post Mount Attaches to stand to provide top or bottom mounting. Use with other accessory holders to expand mounting possibilities. 1 pk. 25.95
SC-EB - Eye Bolt Kit - Wing nut, washer and bolt set fits 9.5mm to 10.5mm shafts. 2 pk. 7.95 SC-4795 - Cowbell U-Clamp Standard “U” style clamp with wing screw to fit post on cowbell holder. 2 pk. (Fits 9.5mm shaft.) 6.95 The GAB-12 and GAB-20 mounting platforms utilize a cast multi-clamp fixture to guarantee secure and even mounting to cymbal stands and other fixed vertical tubes. GAB-12 - 12” long, holds 6 items. 1 pk. 40.50 GAB-20 - 20” long, holds 10 items. 1 pk. 45.50
Hand Percussion Mounting Systems SC-WCA
SC-CA
NEW SC-LRAC
SC-WCM SC-ABM 9.5mm
SC-170
SC-BDHC
SC-RP269 SC-WCC 13.8”
NEW MS-SP
16 SC-WCM - Wind Chime Mount Our SC-AM1 & SC-WCA are matched up to make the ultimate wind chime mount. Multi clamp section fits 1/2” to 1-1/2” dia. Wind chime arm is held via eye bolt mechanism. 1 pk. 39.95 SC-ABM - Agogo Bell Mount Fits on 9.5mm or 10.5mm knurled post. Accomodates most manufacturers’ mountable agogo bells. 1 pk. 17.50 MS-SP - Splash/Percussion
NEW Mounting System -
Mounts two percussion accessories and one small cymbal in any way imaginable. Includes two SC-PLRA Percussion L-rod Attachments (see page 12), (1) SC-TPBA Two-Point Boom Arm and (1) SC-SBRA Short Boom Arm. (See page 11). 1 pk. 119.50
SC-WCA - Chime Arm For Accessory Mount - Attaches to SC-AM one or four accessory mounts for adding wind chimes. 1 pk. 9.95 SC-CA - Cymbal Arm for Accessory Mount - Attaches to SC-AM one or four accessory mounts for adding accent cymbals. 1 pk. 10.95 SC-170 - Boom Cowbell/Tom Arm Boom arm topped with a 5/16” (9.5mm) dia. L-Rod for mounting cowbells and accessories. 1 pk. 59.50
SC-BDHC - Bass Drum Hoop Clamp - Heavy-duty percussion mount which clamps on a bass drum counter hoop. Provides 9.5mm knurled post for mounting bells, blocks, and other percussion instruments. 1 pk. 38.95 SC-WCC - Wood Block/Cowbell Holder for Accessory Mount Attaches to SC-AM accessory mounts for adding wood blocks and cowbells. 1 pk. 14.50 SC-LRAC - L-rod Adjustment Clamp Grabber multi-clamp with L-rod that allows mounting of bells, blocks and other accessories to a set up. Fully Adjustable. 1 pk. 34.95
NEW
SC-RP269 - Bass Drum Double Percussion Mount - Lightweight, dual purpose percussion mount clamps on a bass drum counter hoop. Provides 9.5mm knurled post for mounting bells and other percussion instruments and two mini L-rods for traditional wood block mounting. 1 pk. 16.50
Hand Drum Parts & Accessories SC-CPM
TP-HAND
TP-TRC TP-SM
TP-TRB
SC-CM
SC-268R TP-TW
TP-RT
TP-NB (TP-NC)
17 SC-CPM - Cymbal Post Mount Cymbal holder with heavy-duty tilter assembly and 8mm wing screw. Mounts on 9.5mm shaft. Fits on SC-4425D-1, 170, GAB-20, DTM, AM-1, AM-4 and BDHC. 1 pk. 40.50 SC-CM - Cabasa Mount - Allows a hand-held cabasa to be placed in a padded holder for easy access. Cabasa can also be played while being held in mount. Fits on 1/2” to 1-1/2” dia. tubes. 1 pk. 25.95
SC-268R - Bass Drum Cowbell Mount - Mounts on bass drum counter hoop. 5/16” (9.5mm) post with “U” clamp and wing screw. 1 pk. 12.95
HI-USE HAND DRUM PARTS TP-HAND - Conga Handle In Chrome with mounting hardware. 1 pk. 14.50 TP-TRC - Conga Tension Rod with nut and washer. 1 pk.
5.00
TP-SM - Conga Stand Mount with mounting hardware. 2 pk.
13.95
TP-TRB - Bongo Tension Rod with nut and washer. 1 pk.
5.99
TP-RT - Conga/Bongo Tension Rod Rubber Tip. 6 pk. 3.95
TP-NC - Conga Tension Rod Nut with washer. 6 pk. 5.50 TP-NB - Bongo Tension Rod Nut with washer. 4 pk. 4.50 TP-TW - Tuning Wrench with Lug Grease In Pouch. 1 pk.
6.50
Note: TP stands for Toca Parts. These generic parts by Toca will fit most major manufacturers’ Congas, Bongos and other hand drums.
Gibraltar Power Rack Parts & Accessories
SC-GPRML
SC-GPRTC
SC-RBA
SC-GPRMC
SC-GPRTL SC-GPRAC
SC-GPREC
RACK TUBES
SC-GPREX
SC-GPR40C
SC-GPRARA
SC-GPR43.5 SC-GPRRA
18 POWER RACK SERIES SC-GPRTC - T-Clamp - Connects vertical tubing at a 90˚ angle. 1 pk. 29.95 SC-GPRAC - Rack Angle Clamp Connects rack tube to an angled hinge. High-impact plastic. 1 pk. 18.95 SC-GPREX - Power Rack Extension Clamp - Connects two 1-1/2” dia. rack tubes end to end. 1 pk. 21.95 SC-GPRRA - Right Angle Clamp Fixed 90˚ right angle clamp with hinged sides. 1 pk. 30.95 SC-GPRMC - Power Rack MultiClamp - Universal clamp mounts to rack. Holds 5/8” to 1-1/4” dia. accessory arms. 1 pk. 30.95
SC-GPRTL - T-Leg Clamp - Specially modified SC-GPRTC designed for use with T-leg assemblies. 1 pk. 29.95 SC-GPRARA - Adjustable Right Angle - This all-new clamp allows for many setup capabilities. Use for unique setups or for a quick teardown and fold up of important rack sections 1 pk. 36.95
RACK TUBES 1-1/2” dia. chrome steel tubes with plastic end caps. SC-GPR20 - 20” Tube. 1 pk.
19.95
SC-GPR30 - 30” Tube. 1 pk.
21.95
SC-GPR36 - 36” Tube. 1 pk.
24.95
SC-GPR43.5 - 43.5” Tube. 1 pk. 26.95 SC-GPR59 - 59” Tube. 1 pk.
45.95
SC-GPRML - Power Rack Memory Lock - 1-1/2” dia. ensures same clamp position on rack. All metal construction. 2 pk. 12.95
SC-GPR68 - 68” Tube. 1 pk.
63.95
SC-GPREC - Power Rack Electronic Clamps - Flat arm assemblies with 1-1/2” dia. rack clamps. 2 pk. 64.95
SC-GPR46C - 46” Curved Tube. 1 pk. 52.95
SC-GPR24C - 24” Curved Tube. 1 pk. 29.95 SC-GPR40C - 40” Curved Tube. 1 pk. 44.95
We’ve redesigned the SC-RBA to accept 1/2”, 3/4” or 7/8” dia. tubes. This allows the mounting of almost all manufacturers’ cymbal boom arms and other mounting devices. Fits over any 1-1/2” dia. rack tube. SC-RBA - Cymbal Boom Attachment - Fits over any 1-1/2” dia. rack tube and allows mounting of most popular cymbal boom arms. 1 pk. 26.95
Gibraltar Road Series Parts & Accessories RACK FEET
SC-GRSSMC
SC-GRSAAC
SC-GRSRA
SC-GRSMC
SC-GRSSRA
SC-GRSAR
SC-RC
SC-RF/R
SC-GRSTL
SC-GRSHML
SC-GRSQS
SC-RF
SC-GRSTLA
SC-GRSMTLA
19 RACK FEET
ROAD SERIES
SC-RC - Rack Caster - Converts T-leg assembly into moveable system. 1 pk. 29.95
SC-GRSSMC - Super Multi-Clamp Has a larger multi-clamp section with more gripping surface than the SC-GRSMC or similar multi-clamp. For mounting heavy items.1 pk. 41.95
SC-RF - T-Leg rack rubber feet. 2 pk. 10.95 SC-RF/R - Round foot for GPR Series Racks. 2 pk. 8.95
SC-GRSMC - Multi-Clamp - For mounting toms, cowbells, cymbals, etc., to a standard 1-1/2” dia. rack tube. 1 pk. 37.95 SC-GRSTL - Road Series T-Leg Clamp - The Road Series T-leg clamp is designed for maximum support and stability of 90˚ T-leg assemblies. 1 pk. 35.95 SC-GRSAAC - Adjustable Angle Clamp - Secures two tubes and allows for angle adjustment. 1 pk. 50.95
SC-GRSQS - Road Series Quick-Set Clamp - Allows for two position (locking) angles which helps to quicken setup and teardown of rack system. Same clamp used on the GRS-300QS Gibraltar rack system. Primarily designed for use on horizontal bar(s) and vertical leg bars. 1 pk. 59.95 SC-GRSSRA - Stackable Right Angle Clamp - Allows two tubes to meet at the same horizontal angle and pivot up to 90˚ on a vertical leg. 1 pk. 40.95 SC-GRSHML - Memory Lock (w/hinge) - Can be added to the rack without sliding other components off. 1 pk. 16.95 SC-GRSRA - Right Angle Clamp Fixed 90˚ with hinged sides. 1 pk. 39.95
SC-GRSAR - Adjustable Right Angle Clamp - Similar in design to the SC-GRSRA right angle clamp. The adjustable right angle clamp allows multiple angle adjustments via a geared drum key rod/bolt assembly. 1 pk. 48.95 SC-GRSTLA - Road Series T-Leg Assembly - Rack T-leg assembly with Road Series T-clamp attaches to vertical tube (20” long). 1 pk. 46.95 SC-GRSMTLA - Road Series Mini T-Leg Assembly - Mini version of the SC-GRSTLA. Excellent for tight drum setups (12” long). 1 pk. 45.95
THESE ARE A FEW OF THE WORLD RENOWNED DRUMMERS AND PERCUSSIONISTS USING AND ENDORSING GIBRALTAR SERVICE
R ICKY L AWSON
T OMMY L EE
S COTT P HILLIPS
D ON A LIAS
W ALFREDO R EYES J R.
C ARL P ALMER
M ARK T ROJANOWSKI
K EVIN R ICARD
J OE M ORRIS
J UAN E SCOVEDO
N IR Z
R OBERT R ODRIGUEZ
W ILLIE G REEN
J OHN M ICELI
R ICK S TEEL
D AVID R OMERO
S TEVEN W OLF
J OE S TRONSICK
M ICHAEL W HITE
D ANNY R EYES
KCP-603 Printed in U.S.A. 01/01 45M
Visit Gibraltar On-Line at www.KamanMusic.com
Kaman Music Corp., P.O. Box 507, Bloomfield, CT 06002
