Part

48 downloads 101268 Views 4MB Size Report
Nov 9, 2012 ... Chennai – 600 032. ..... utilized in a split manner in order to provide both, the transmission and the differential required for operating a vehicle.
¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖ ¿ÖÖÃ֍úßµÖ •Ö−ÖÔ»Ö OFFICIAL JOURNAL OF THE PATENT OFFICE

×−֐ÖÔ´Ö−Ö ÃÖÓ. ISSUE NO.

45/2012 45/2012

¿ÖãÎú¾ÖÖ¸ü FRIDAY

פü−ÖÖӍú: 09/11/2012 DATE: 09/11/2012

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖ ‹ú ¯ÖύúÖ¿Ö−Ö PUBLICATION OF THE PATENT OFFICE

20936 The Patent Office Journal 09/11/2012

INTRODUCTION In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005 effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched.

(CHAITANYA PRASAD) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

9th NOVEMBER, 2012

20937 The Patent Office Journal 09/11/2012

CONTENTS

SUBJECT

PAGE NUMBER

JURISDICTION

:

20939 – 20940

SPECIAL NOTICE

:

20941 – 20942

EARLY PUBLICATION (DELHI)

:

20943 – 20947

EARLY PUBLICATION (MUMBAI)

:

20948 – 20952

EARLY PUBLICATION (CHENNAI)

:

20953 – 20977

EARLY PUBLICATION (KOLKATA)

:

20978 – 20979

PUBLICATION AFTER 18 MONTHS (DELHI)

:

20980 – 21179

PUBLICATION AFTER 18 MONTHS (MUMBAI)

:

21180 – 21279

PUBLICATION AFTER 18 MONTHS (CHENNAI)

:

21280 – 21479

PUBLICATION AFTER 18 MONTHS (KOLKATA)

:

21480 – 21596

PUBLICATION U/R 84[3] IN RESPECT OF APPLICATION FOR RESTORATION OF PATENTS (CHENNAI)

:

21597

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (DELHI)

:

21598 – 21600

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (MUMBAI)

:

21601 – 21606

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (CHENNAI)

:

21607 – 21609

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (KOLKATA)

:

21610

INTRODUCTION TO DESIGN PUBLICATION

:

21611

DESIGN CORRIGENDUM

:

21612

COPYRIGHT PUBLICATION

:

21613

THE DESIGNS ACT 2000 SECTION 30 DESIGN ASSIGNMENT

:

21614

DESIGNS ACT 2000 (UNDER SECTION 31) RECTIFICATION OF REGISTER

:

21615

REGISTRATION OF DESIGNS

:

21616 - 21665

20938 The Patent Office Journal 09/11/2012

THE PATENT OFFICE KOLKATA, 09/11/2012 Address of the Patent Offices/Jurisdictions The following are addresses of all the Patent Offices located at different places having their Territorial Jurisdiction on a Zonal basis as shown below:1

Office of the Controller General of Patents, Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai – 400 037

4

Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]

2

3

The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai – 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected] ™ The States of Andhra Pradesh, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.

The Patent Office, Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai – 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387 E-mail: [email protected] ™ The States of Gujarat, Maharashtra, Madhya Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli

5

The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector –V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected] ™ Rest of India

The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Phone: (91)(11) 2808 1921 – 25 Fax: (91)(11) 2808 1920 & 2808 1940 E.mail: [email protected] ™ The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.

Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

20939 The Patent Office Journal 09/11/2012

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖê»ÖúÖŸÖÖ, פü−ÖÖӍ 09/11/2012 úÖµÖÖÔ»ÖµÖÖë êú Öê¡ÖÖ׬֍úÖ¸ü êú ¯ÖŸÖê

1

2

3

×¾Ö×³Ö®Ö •ÖÖÆüÖë ¯Ö¸ü ÛÃ£ÖŸÖ ¯Öê™êü−™ü úÖµÖÖÔ»ÖµÖ êú ¯ÖŸÖê †ÖÓ“Ö׻֍ú †Ö¬ÖÖ¸ü ¯Ö¸ü ¤üÙ¿ÖŸÖ ˆ−֍úê ¯ÖÏÖ¤êü׿֍ú †×¬ÖúÖ¸ü Öê¡Ö êú ÃÖÖ£Ö −Öß“Öê פü‹ Ö‹ Æïü :úÖµÖÖÔ»ÖµÖ: ´ÖÆüÖ×−ÖµÖӡ֍ú, ‹úþÖ, †×³Öú»¯Ö ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ “Öê®Ö‡Ô, 4 ŸÖ£ÖÖ ¾µÖÖ¯ÖÖ¸ü דÖÅ−Ö, ‡Ó™êü»ÖꌓÖã†»Ö ¯ÖÏÖê¯Ö™üá ¸üÖ‡™ËüÃÖ ×²ÖÜ»›üÖ ‹−Ö™üÖò¯Ö ×Æü»Ö ›üü֍ú‘Ö¸ êú ÃÖ´Ö߯Öü, ‡Ó›üÛÙÒüµÖ»Ö ‡Ã™êü™ü ‹ÃÖ. ‹´Ö. ¸üÖê›ü, ‹ÃÖ†Ö‡Ô›üßÃÖ߆Öê †Ö¸ü‹´Ö›üß ÖÖê›üÖˆ−Ö ‹×¸üµÖÖ ‹−Ö™üÖò¯Ö ×Æü»Ö, ´Öã´²Ö‡Ô -400 037, ³ÖÖ¸üŸÖ. ‹›ü•ÖÃÖê−™ü ™ãü ‡ÔÖ»Ö °»ÖÖÍú ±úÖê−Ö: (91)(22) 24123311 •Öß.‹ÃÖ.™üß. ¸üÖê›ü, ÖÖµÖ−›üß, ±îúŒÃÖ: (91)(22) 24123322 “Öê®Ö‡Ô - 600 032. ±úÖê−Ö: (91)(44) 2250 2081-84 ‡Ô.´Öê»Ö: [email protected] ±îúŒÃÖ: (91)(44) 2250-2066 ‡Ô.´Öê»Ö: [email protected] ™ †Ö−¬ÖÐ ¯ÖϤêü¿Ö, ú−ÖÖÔ™üú, êú¸ü»Ö, ŸÖ×´Ö»Ö−ÖÖ›ãü ŸÖ£ÖÖ ¯Öã›ãü“Öê¸üß ¸üÖ•µÖ Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö, »ÖÖ«üß¯Ö ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ, ³ÖÖ¸üŸÖ ÃÖ¸üúÖ¸ 5 ²ÖÖîרüú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö, ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖê»ÖúÖŸÖÖ (¯ÖϬÖÖ−Ö úÖµÖÖÔ»ÖµÖ), ‹−Ö™üÖò¯Ö ×Æü»Ö ›üü֍ú‘Ö¸ êú ÃÖ´Ö߯Öü, ²ÖÖîרüú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö, ‹ÃÖ. ‹´Ö. ¸üÖê›ü, ÃÖ߯Öß-2, ÃÖꌙü¸ü-V, ÃÖÖ»™ü »Öêú ×ÃÖ™üß, ‹−Ö™üÖò¯Ö ×Æü»Ö, ´Öã´²Ö‡Ô - 400 037, úÖê»ÖúÖŸÖÖ- 700 091, ³ÖÖ¸üŸÖ. ±úÖê−Ö: (91)(22) 2413 7701, ±úÖê−Ö: (91)(33) 2367 1943/44/45/46/87 ±îúŒÃÖ: (91)(22) 2413 0387 ±îúŒÃÖ/Fax: (91)(33) 2367 1988 ‡Ô.´Öê»Ö: [email protected] ‡Ô.´Öê»Ö: [email protected] ™ Öã•Ö¸üÖŸÖ, ´ÖÆüÖ¸üÖ™Òü, ´Ö¬µÖ ¯ÖϤêü¿Ö, ÖÖê†Ö ŸÖ£ÖÖ ”û¢ÖßÃ֐֜Íü ¸üÖ•µÖ Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö, ¤ü´Ö−Ö ŸÖ£ÖÖ ¤üß¾Ö, ¤üÖ¤ü¸ü ™ ³ÖÖ¸üŸÖ úÖ †¾Ö¿ÖêÂÖ Öê¡Ö †Öî¸ü −֐ָü Æü¾Öê»Öß. ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ ×¤ü»»Öß, ²ÖÖîרüú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö, ¯»ÖÖò™ü ÃÖÓ. 32, ÃÖꌙü¸ü - 14, «üÖ¸üúÖ, −Ö‡Ô ×¤ü»»Öß - 110 075. ±úÖê−Ö: (91)(11) 2808 1921-25 ±îúŒÃÖ: (91)(11) 2808 1920, 2808 1940 ‡Ô.´Öê»Ö: [email protected] ™ Æü׸üµÖ֝ÖÖ, ×Æü´ÖÖ“Ö»Ö ¯ÖϤêü¿Ö, •Ö´´Öæ ŸÖ£ÖÖ ú¿´Ö߸ü, ¯ÖÓ•ÖÖ²Ö, ¸üÖ•ÖãÖÖ−Ö, ˆ¢Ö¸ü ¯ÖϤêü¿Ö, פü»»Öß ŸÖ£ÖÖ ˆ¢Ö¸üÖÓ“Ö»Ö ¸üÖ•µÖ Öê¡ÖÖë, ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö “ÖÓ›üߐ֜Íü ¾Öê²ÖÃÖÖ‡™ü: http://www.ipindia.nic.in www.patentoffice.nic.in

¯Öê™ëü™ü †×¬Ö×−ÖµÖ´Ö, 1970 ŸÖ£ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) †×¬Ö×−ÖµÖ´Ö, 2005 †£Ö¾ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) ×−ÖµÖ´Ö, 2006 «üÖ¸üÖ ¾ÖÖÓ×”ûŸÖ ÃÖ³Öß †Ö¾Öê¤ü−Ö, ÃÖæ“Ö−ÖÖ‹Ñ, ×¾Ö¾Ö¸üÖ µÖÖ †−µÖ ¤üßÖÖ¾Öê•Ö µÖÖ úÖê‡Ô ¿Ö㻍ú ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ êú êú¾Ö»Ö ˆ¯ÖµÖãŒŸÖ úÖµÖÖÔ»ÖµÖ ´Öë þÖߍéúŸÖ ÆüÖëÖê … ¿Ö㻍ú: ¿Ö㻍ú µÖÖ ŸÖÖê −֍ú¤ü ºþ¯Ö ´Öë µÖÖ "Controller of Patents" êú −ÖÖ´Ö ´Öë ¤êüµÖ ²Öïú ›ÒüÖ°™ü µÖÖ “Öêú êú «üÖ¸üÖ ³Öê•Öß •ÖÖ Ã֍úŸÖß Æîü •ÖÖê ˆÃÖß Ã£ÖÖ−Ö êú ׍úÃÖß †−ÖãÃÖæ×“ÖŸÖ ²Öïú ´Öë ¯ÖϤü¢Ö ÆüÖê •ÖÆüÖÑ ˆ¯ÖµÖãŒŸÖ úÖµÖÖÔ»ÖµÖ ÛÃ£ÖŸÖ Æïü… 20940 The Patent Office Journal 09/11/2012

SPECIAL NOTICE 18 Months publication as required under Section 11A of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules, 2006. Notice is also given that if any interested person requests for copies of the complete specification, drawing and abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be obtained, the same can be provided by the respective Patent Offices on request.

(CHAITANYA PRASAD) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

20941 The Patent Office Journal 09/11/2012

SPECIAL NOTICE Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005 and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III, Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published containing all the activities of The Patent Office such as publication of all the patent applications after 18th months , grant of patents & all other information in respect of the proceedings as required under the provisions of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday. The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are discontinued from 01/01/2009.

SPECIAL NOTICE Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act. However, if duplication of publication of any application is found, then earlier date of publication will be taken for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months from the date of second publication, provided that there is there is no third party representation.

20942 The Patent Office Journal 09/11/2012

Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule 24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.2315/DEL/2011 A (19) INDIA (22) Date of filing of Application :16/08/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : CURE OF MALARIA BY HOMEO MEDICINE (51) International classification :A61K (71)Name of Applicant : (31) Priority Document No :NA 1)DR. L.S. CHAUHAN Address of Applicant :DR. N.L. VAISH DR. VAISH EYE (32) Priority Date :NA (33) Name of priority country :NA RESEARCH CENTER, 19/3 RASID MARKET CHANDRA (86) International Application No :NA NAGAR DELHI-51 India Filing Date :NA (72)Name of Inventor : (87) International Publication No :NA 1)DR. L.S. CHAUHAN (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : AClinical trail on approx. 500 patient suffering form Malaria was done successfully under nosode drug therapy 400 patients did not returned for the follow-up. since they were fully cured. Remaining 100 patients had their follow up check for improvement according to symptoms and pathogenic exam. My treatment work is then authenticated pathologically by test of blood smear as per pathology report. This has been experienced on the basis of report receivd for Lab. It is therefore evident that the medicine is very successful. Some homeopathic medicine such as Chinium ars, Malaria off, Chine, Nutrum mur through exhaustive use has resulted in effective treatment of malaria on human being. The research work on the disease has proved that homeopathic therapy is very affective in eradicating the disease. No. of Pages : 10 No. of Claims : 5

20943 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.2106/DEL/2012 A

(19) INDIA (22) Date of filing of Application :06/07/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : WOODEN KNITTING NEEDLES WITH SQUARE CROSS SECTION AND THE METHOD OF MANUFACTURING THEREOF (51) International classification :B23B (71)Name of Applicant : (31) Priority Document No :NA 1)KNITPRO INTERNATIONAL Address of Applicant :PLOT NO. PA - 010 - 001 & 014, (32) Priority Date :NA (33) Name of priority country :NA ENGINEERING ZONE, MAHINDRA WORLD CITY SPECIAL (86) International Application No :NA ECONOMICS ZONE, JAIPUR (RAJ) 302037 INDIA Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)RASTOGI, ASHOLE KUMAR (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The present invention generally relates to important to propose such knitting needle, particularly made of wood, which do not have round surface and are structured as cuboid shaped knitting needles with four preferred surfaces and four edges thereto throughout the needle body, wherein such proposed cuboid needles have square cross-sections, particularly defining the equivalent diameters of the stitches created during knitting thereof. These proposed wooden cuboid shaped knitting needles, having square cross-sectional area, are hereinafter referred as cubic knitting needle. No. of Pages : 15 No. of Claims : 10

20944 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3320/DEL/2011 A

(19) INDIA (22) Date of filing of Application :21/11/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : A SYSTEM AND A METHOD FOR WATER PURIFICATION (51) International classification :C07C (71)Name of Applicant : (31) Priority Document No :NA 1)Aquamall Water Solutions LTD (32) Priority Date :NA Address of Applicant :Lal Tappar Industrial Area Majri Grant (33) Name of priority country :NA Uttarakhand Uttaranchal India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)Dr. Suresh Kumar Sisodia (87) International Publication No : NA 2)Mr. Nirmal J.C.Patrick (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A system for purifying water using reverse osmosis includes a diverter valve, a lower pressure switch, a sediment cartridge, a plurality of solenoid valves, a plurality of total dissolved solids (TDS) probe, a booster pump, an antiscalant reservoir, a pre carbon block, a reverse osmosis membrane filter, a post carbon filter, a storage tank, a reject flow mechanism, and a plurality of non return valves. Further, the reject flow mechanism and the sediment cartridge are configured to re-circulate reject/brine water that comes out of reverse osmosis membrane filter in to the system. No. of Pages : 31 No. of Claims : 16

20945 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3744/DEL/2011 A

(19) INDIA (22) Date of filing of Application :20/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : SYNCHRONIC WIND TURBINE GENERATOR (51) International classification :H01R (71)Name of Applicant : (31) Priority Document No :P110103701 1)INDUSTRIES METALURGICAS PASCARMONA (32) Priority Date :05/10/2011 S.A.I.C Y.F. (33) Name of priority country :Argentina Address of Applicant :CARRIL RODRIGUEZ PENA 2451 (86) International Application No :NA (M5503AHY) GODOY CRUZ, MENDOZA (AR) Argentina Filing Date :NA (72)Name of Inventor : (87) International Publication No :NA 1)PESCARMONA, ENRIQUE (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A synchronic generator of the kind used in devices such as wind turbine generators and the like, where the synchronic generator comprises at least a stator and at least two windings placed opposite and parallel to its rotation axis and at least a refrigeration system that simplifies the structure and reduces the dimensions, with a magnetic induction by means of permanent magnets. The design of this generator allows a better use of the space close to the external diameter of the generator allowing a power increase, minimizing the weight, without increasing the external diameter of the generator, maintaining the length, flow density and the rotating speed, which implies an advantage at the moment of the transportation from the factory to the building of the wind farm of destiny. On the other hand, an additional advantage is that depending on the wind conditions one or both windings can work or both at the same time, which optimizes its yield and versatility, also increasing its reliability since its converter adapts the energy of each winding to the network by separate or in a parallel way. Another important advantage is that of sharing at least a refrigeration system, which reduces the spaces and structural complexity of the complete machine. No. of Pages : 13 No. of Claims : 12

20946 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.832/DEL/2012 A

(19) INDIA (22) Date of filing of Application :21/03/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : MULTI-PURPOSE FOOD PROCESSING DEVICE (51) International classification :B23B (71)Name of Applicant : (31) Priority Document No :NA 1)PYARE LAL VISHWAKARMA (32) Priority Date :NA Address of Applicant :D-52/34, L- LAKSHMI KUND, (33) Name of priority country :NA VARANASI (U.P.) INDIA (86) International Application No :NA 2)VIJAY KUMAR VISWAKARMA Filing Date :NA (72)Name of Inventor : (87) International Publication No :NA 1)PYARELAL VISHWAKARMA (61) Patent of Addition to Application Number :NA 2)VIJAY KUMAR VISWAKARMA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The present invention relates to a multi-purpose food processing device comprising: a power supply system provided with: switch control means for conducting electrical current which is a miniature circuit breaker (MCB) unit; at least two capacitors; an electronic clutch for interconnecting the switch means and the capacitors; and an electric motor of AC induction type provided with: single fed winding in series connected relationship with one another; a radial rotor provided in the center surrounded by stumping for driving the rotatable processing means having basket winding and a field winding in series connected relationship with one another; at least two ball bearings provided on both sides of the rotor mounted on a common conductive shaft which runs through the rotor and the ball bearings. The present invention also relates to devices wherein the electric motor is provided with a means for connecting flour grinder or mixer-grinder or oil extractor/processor attachment, separately or in combination. No. of Pages : 50 No. of Claims : 64

20947 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.2015/MUM/2010 A

(19) INDIA (22) Date of filing of Application :29/07/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : MOTOR DIFFERENTIAL (51) International classification

:H02K16/02, B60K17/16 :NA :NA :NA :NA :NA : NA :NA :NA :NA :NA

(71)Name of Applicant : 1)KPIT CUMMINS INFOSYSTEMS LTD Address of Applicant :35 & 36, RAJIV GANDHI INFOTECH PARK, PHASE 1, MIDC, HINJEWADI, PUNE-411 057, Maharashtra India (72)Name of Inventor : 1)MR. KSHATRIYA TEJAS KRISHNA 2)SABLE ANUP VITTHAL

(31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date (57) Abstract : A method for using an electric motor as differential for a vehicle is disclosed. The electric motor for a hybrid or an electric vehicle is utilized in a split manner in order to provide both, the transmission and the differential required for operating a vehicle. The motor differential allows for rotating a pair of driving wheels at different speeds, mainly while turning of the vehicle. The split AC induction motor comprising of stator windings and two independent rotors is utilized to generate the flux and the torque required for running the vehicle as well as providing the differential action required for turning the vehicle. No. of Pages : 19 No. of Claims : 7

20948 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.2473/MUM/2012 A

(19) INDIA (22) Date of filing of Application :27/08/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : A PROCESS FOR PREPARATION OF COBICISTAT INTERMEDIATE.

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :C07D277/00, 1)SEQUENT SCIENTIFIC LIMITED A61P31/18 Address of Applicant :116 VARDHMAN INDUSTRIAL :NA COMPLEX, L.B.S MARG, THANE (W), MUMBAI - 400 601, :NA Maharashtra India :NA (72)Name of Inventor : :NA 1)MANJATHURU, MAHALINGA :NA 2)MAYEKAR, ANIL NARAYAN : NA 3)DERAMBALA, YOGEESH :NA 4)CHANDRAPPA, PRASHANTHA NERLIKERE :NA 5)VASUDEVA, PEJAKALA KAKRANNAYA :NA 6)ARULMOLI, THANGAVEL :NA 7)DAS, GAUTAM KUMAR

(57) Abstract : The present invention discloses a novel process for the preparation of (2S, 3S, 5S)-5-amino-2-(N-((5-thiazolyl)methoxycarbonyl)amino)-l,6-diphenylhexane hydrochloride of formula II, which is a key intermediate in the preparation of cobicistat, a drug under experimental investigation for use in the treatment of infection with the human immunodeficiency virus (HIV). No. of Pages : 12 No. of Claims : 9

20949 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.2902/MUM/2012 A

(19) INDIA (22) Date of filing of Application :01/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : A PROCESS FOR PREPARATION OF BIS-(2,4-DICUMYLPHENYL) PENTAERYTHRITOL DIPHOSPHITE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :C07F9/6574 1)SEQUENT SCIENTIFIC LIMITED :NA Address of Applicant :116 VARDHMAN INDUSTRIAL :NA COMPLEX, L.B.S MARG, THANE(W), MUMBAI - 400 601, :NA Maharashtra India :NA (72)Name of Inventor : :NA 1)KAREGOUDAR, PRAKASH : NA 2)HARIKRISHNA, NANDAM :NA 3)KALURKATTE, DIVYA SEETHARAM :NA 4)KRISHNA, BETTADAPURA GUNDAPPA :NA 5)ARULMOLI, THANGAVEL :NA 6)DAS, GAUTAM KUMAR

(57) Abstract : The present invention relates to a novel, cost-effective process for preparation of an Antioxidant bis (2,4-dicumyIphenyI) pentaerythritol diphosphite commonly known as Doverphos-S-9228 of formula I by condensing pentaerythritol with 2,4dicumylphenol using a reagent and catalyst in presence of a solvent. No. of Pages : 10 No. of Claims : 9

20950 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3180/MUM/2010 A

(19) INDIA (22) Date of filing of Application :05/08/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : A SYSTEM FOR PROTECTION OF EMBEDDED SOFTWARE CODES (51) International classification

:G06F12/14, G06F21/00 :NA :NA :NA :NA :NA :N/A :NA :NA :NA :NA

(71)Name of Applicant : 1)KPIT CUMMINS INFOSYSTEMS LTD Address of Applicant :35 AND 36, RAJIV GANDHI INFOTECH PARK, PHASE 1, MIDC, HINJAWADI, PUNE-411 057, Maharashtra India (72)Name of Inventor : 1)DR. VINAY VAIDYA 2)SUDHAKAR SAH 3)CHAITANYA RAJGURU 4)VAISHNAVI POHARKAR

(31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date (57) Abstract : A system for securing embedded software codes having an industrial application from unauthorized access and use is disclosed. The system for code security according to the present invention provides protection for embedded software codes implemented in an automated application. According to the disclosed invention, the code is divided into plurality of segments and parts of the algorithm are distributed and executed in multiple environments, thereby preventing hacking of the code. No. of Pages : 12 No. of Claims : 7

20951 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.343/MUM/2012 A

(19) INDIA (22) Date of filing of Application :06/02/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : 1-ARYL-3-(3,4,5-TRIMETHOXYPHENYL)-2-PROPEN-1-ONES AS ANTIMALARIALS (51) International classification

:A61P33/06, A61K31/00 :NA :NA :NA :NA :NA :N/A :NA :NA :NA :NA

(71)Name of Applicant : 1)MAHAJAN, SUPRIYA SUDHAKAR Address of Applicant :HIMGIRI-B-307, LOKHANDWALA COMPLEX, ANDHERI(WEST), MUMBAI-400 053, Maharashtra India 2)VAIDYA, SHALAKA SAINATH (72)Name of Inventor : 1)MAHAJAN, SUPRIYA SUDHAKAR 2)VAIDYA, SHALAKA SAINATH

(31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date (57) Abstract : The present invention discloses l-aryl-3-(3,4,5-trimethoxyphenyl)-2-propen-i-one compounds of formula I as ideal candidates for development of new antimalarials. These two compounds have shown good in vitro antimalarial activity against chloroquine-sensitive and chloroquine-resistant strains of Plasmodium falciparum and chloroquine-sensitive strains of P. berghei. wherein, R and R selected independently of each other from H, phenyl or methoxy. No. of Pages : 26 No. of Claims : 10

20952 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1316/CHE/2012 A

(19) INDIA (22) Date of filing of Application :02/04/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD AND SYSTEM FOR MULTIVIEW DISTRIBUTED VIDEO CODING WITH ADAPTIVE SYNDROME BIT RATE CONTROL (51) International classification :F24C (71)Name of Applicant : (31) Priority Document No :NA 1)WIPRO LIMITED (32) Priority Date :NA Address of Applicant :DODDAKANNELLI, SARJAPUR (33) Name of priority country :NA ROAD, BANGALORE - 560 035 Karnataka India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)VIJAY KUMAR KODAVALLA (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A method and device for multiview distributed video coding with adaptive syndrome bit rate control are disclosed. In one embodiment, multiple groups, including video frames coming from associated digital cameras, are formed. Further, video frames coming from a predetermined number of the digital cameras are declared as key video frames. Furthermore, video frames coming from remaining digital cameras are declared as non-key video frames. In addition, the key video frames are encoded to obtain encoded bits. Moreover, the non-key video frames are encoded to obtain syndrome bits. Also, the encoded key video frames are decoded, to obtain decoded bits and the encoded non-key video frames are decoded, to obtain decoded bits and CRC bits. Further, an optimal number of syndrome bits in each non-key video frame are determined. Furthermore, the encoded bits and determined optimal number of syndrome bits are sent to multiple receivers. No. of Pages : 53 No. of Claims : 28

20953 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1488/CHE/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : A PULP WOOD DEBARKING AND DELIMBING MACHINE (51) International classification :B27L (71)Name of Applicant : (31) Priority Document No :NA 1)HYPRO AB Address of Applicant :SMALATORP 882, 280 70 (32) Priority Date :NA (33) Name of priority country :NA LONSBODA Sweden (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)TOMMY KARLSSON (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : Disclosed is a pulp wood delimbing and debarking machine with sets of feeder wheels and cutting knives. The primary and secondary feeder wheels have diagonally set bar patterns to create a rotating motion, while the bottom (tertiary) feeder wheel creates a straight feeding motion that counteracts the rotation. The cutting knives clasp upon the wooden log to perform the shearing or debarking of the pulp wood. The machine can be easily transported to the site of operation by mounting on tractor like vehicles and provides a less labor intensive and more economical method of debarking. No. of Pages : 13 No. of Claims : 9

20954 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.2195/CHE/2012 A

(19) INDIA (22) Date of filing of Application :31/05/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : SYSTEM AND METHOD FOR MOBILE INTERNET OFFLOADING IN A WIRELESS COMMUNICATION NETWORK (51) International classification :H04L (71)Name of Applicant : (31) Priority Document No :NA 1)Wipro Limited (32) Priority Date :NA Address of Applicant :Doddakannelli Sarjapur Road (33) Name of priority country :NA Bangalore Karnataka India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)SAPTARSHI CHAUDHURI (87) International Publication No : NA 2)SUBHODEEP SARKAR (61) Patent of Addition to Application Number :NA 3)SOUMYA SHANKAR SARDAR Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A system and method for mobile Internet offloading in a wireless communication network are disclosed. In one embodiment a session is established through an Internet offload gateway (IOGW) with a mobile operator network to establish a communication with a mobile device. A packet coming from the mobile device is received by an intelligent policy manager (IPM) residing in the IOGW during the session. If the received packet is a signaling packet offload rule flags are generated and operator defined offload policy rules are then enabled. If the received packet is a data packet it is determined whether the operator defined offload policy rules match with session information associated the data packet. If the operator defined offload policy rules match the data packet is offloaded to the Internet. If the operator defined offload policy rules do not match the data packet is sent to a home gateway. No. of Pages : 38 No. of Claims : 15

20955 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1314/CHE/2012 A

(19) INDIA (22) Date of filing of Application :02/04/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : ARCHITECTURE FOR ENERGY MANAGEMENT OF MULTI CUSTOMER MULTI TIME ZONE DISTRIBUTED FACILITIES (51) International classification :G06Q (71)Name of Applicant : (31) Priority Document No :NA 1)WIPRO LIMITED (32) Priority Date :NA Address of Applicant :DODDAKANNELLI, SARJAPUR (33) Name of priority country :NA ROAD, BANGALORE-560035 Karnataka India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)RAVI MEGHANI (87) International Publication No : NA 2)ROHIT SRIVASTAVA (61) Patent of Addition to Application Number :NA 3)SUBHASIS MANDAL Filing Date :NA 4)SUDIPTA GHOSH (62) Divisional to Application Number :NA 5)DR. ANURAG SRIVASTAVA Filing Date :NA (57) Abstract : A system and method for energy management for multi customer multi time zone distributed facilities are disclosed. In one embodiment, data associated with the energy management of the multi customer distributed facilities located in different time zones is obtained based on associated energy models by a data acquisition/integration layer. Further, the obtained data for energy management of the multi customer distributed facilities is transformed by a data management layer. Furthermore, control commands are generated using the transformed data and associated one or more predefined thresholds and set-points by an energy transaction layer. Also, energy of the multi customer distributed facilities is substantially simultaneously managed using the generated control commands by the energy transaction layer. No. of Pages : 82 No. of Claims : 28

20956 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3139/CHE/2011 A

(19) INDIA (22) Date of filing of Application :14/09/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : STEPS IN BUSES AS PNEUMATIC LIFTER IN MOST EFFICIENT WAY

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : 1)A. VIJAY RAJ Address of Applicant :DEPARTMENT OF MECHANICAL ENGINEERING KALASLINGAM UNIVERSITY ANAND NAGAR KRISHNANKOIL SRIVILLIPUTHUR - 626190 Tamil Nadu India :F15B 2)V.VIGNESHWARAN :NA 3)S.VIGNESH RAJA :NA 4)L.VIGNESH :NA 5)S.VIGNESHWARAN :NA 6)V.TAMILSELVAM :NA 7)SRIPRIYAN.K : NA 8)HEAD OF THE MECHANICAL DEPARTMENT :NA (72)Name of Inventor : :NA 1)A. VIJAY RAJ :NA 2)V.VIGNESHWARAN :NA 3)S.VIGNESH RAJA 4)L.VIGNESH 5)S.VIGNESHWARAN 6)V.TAMIL SELVAM 7)SRIPRIYAN. K 8)HEAD OF THE MECHANICAL DEPARTMENT

(57) Abstract : A bladder arrangement is setup under the steps of the vehicle. When normal people climb the steps the bladder compresses the air. The compressed air is stored in a reservoir. Similarly compressor in the bus also further compresses the air in the cylinder to attain the required pressure in air. Further this compressed air is used in actuating a piston which helps in rising the steps up and down for the physically challenged people. It could also be used to raise heavy load in to the vehicle. The main aim is utilizing the pneumatic power rather than hydraulic and electronic which are costly in most efficient way. No. of Pages : 15 No. of Claims : 10

20957 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.2502/CHE/2011 A

(19) INDIA (22) Date of filing of Application :21/07/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : RUNNING OF VEHICLE THROUGH SPRING TENSION

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : 1)A. MOTHILAL Address of Applicant :DEPARTMENT OF MECHANICAL ENGINEERING, KALASALINGAM UNIVERSITY ANAND :B60H NAGAR, KRISHNAN KOIL SRIVILLIPUTHUR 626190 Tamil :NA Nadu India :NA 2)J. VIGNESH :NA 3)C. VIGNESHWAR KIRAN BOSE :NA 4)K. VIJAYA RAGHUNATH :NA 5)L. NAGAPPAN : NA 6)HEAD OF THE MECHANICAL DEPARTMENT :NA (72)Name of Inventor : :NA 1)A. MOTHILAL :NA 2)J. VIGNESH :NA 3)C. VIGNESHWAR KIRAN BOSE 4)K. VIJAYA RAGHUNATH 5)L. NAGAPPAN 6)HEAD OF THE MECHANICAL DEPARTMENT

(57) Abstract : The Invention relates to the Field of Automobile. More specifically, can say as to vehicle moving through spring mechanism. No. of Pages : 10 No. of Claims : 3

20958 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3945/CHE/2012 A

(19) INDIA (22) Date of filing of Application :24/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : INTELLIGENT LOCATION IDENTIFICATION AND PASSENGER-ALERT SYSTEM IN RAILWAYS USING GPS RECEIVER (51) International classification :G08G1/00 (71)Name of Applicant : (31) Priority Document No :NA 1)MR. ANISH NK (32) Priority Date :NA Address of Applicant :18, LAL BAHADUR SASTRI ST., (33) Name of priority country :NA PONDICHERRY - 605 001 India (86) International Application No :NA 2)DR. S. MOORTHI Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)MR. ANISH NK (61) Patent of Addition to Application Number :NA 2)DR. S. MOORTHI Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : Todays railway schedules are associated with a lot of unexpected delays and hence the estimated time of arrival cannot be predicted with high accuracy. Hence, there arises the need for a passenger alert system which would alert the passenger when the train is within a pre-specified distance to a mentioned destination. The aim of this work is to develop an intelligent real-time interactive information system which senses the location of the train and calculates the distance of the train to the destination railway station which is taken as input from the user. An alarm is activated once the distance is within a certain pre-specified limit, thereby functioning as a passengeralert system. The purpose of this alert system is to make sure that the passenger, travelling in the train, alights comfortably at the intended destination. An embedded system has been designed interfacing a GPS receiver with a host Field Programmable Gate Array (FPGA) board. No. of Pages : 19 No. of Claims : 10

20959 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3963/CHE/2012 A

(19) INDIA (22) Date of filing of Application :24/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : PAB REACTOR (51) International classification :C02F3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)DR. A.K.SABHAPATHY Address of Applicant :M/S. KRISHNA HOSPITAL (32) Priority Date :NA CHITTOOR ROAD, COCHIN - 11, ERNAKULAM DIST Kerala (33) Name of priority country :NA India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA (87) International Publication No : NA 1)DR. A.K. SABHAPATHY (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The PAB reactor is designed to overcome the problems with the treatment of the bio-waste from the hospitals and for the management, degradation and safe disposal of the placenta, anatomical materials, organs and body parts without bones. The reactor incorporates the technique of the deep burial process along with improved engineering concepts for the effective disposal, of the biowaste from the hospitals. The reactor is well controlled for quick degradation of the anatomical waste material with a high degree of protection to the environment and most suitable for all hospital atmospheres. The placenta anaerobic bio-reactor (PAB reactor) for the management, degradation and safe disposal of anatomical body parts and organs with a high degree of protection to the environment comprises an outer chamber (1) enclosing the reactor for digesting the anatomical body parts, a flush tank (2) connected to the inlet pipe (4) for transporting the degradable waste material into the said digester enclosed by the said outer chamber (1), a perforated discharge pipe (6) and an effluent overflow outlet pipe (7) connected to the said digester through the said chamber (1) at a predetermined distance from the bottom end for transporting the excess effluent and water from the said digester to the settling container, a gas discharge pipe (9) connected to the digester through a perforated portion (11) of the pipe (14) at the diagonally opposite end to the said effluent overflow outlet pipe (7) . for letting out the generated gas in the said PAB reactor and the said pipe (14) comprises provisions (15) at the bottom end and effluent adding device (12) at the top end for enabling the bacterial culture to reach the said reactor. No. of Pages : 16 No. of Claims : 10

20960 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3503/CHE/2011 A

(19) INDIA (22) Date of filing of Application :12/10/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : SCOOTER TYPE VEHICLE (51) International classification :B60N (71)Name of Applicant : (31) Priority Document No :NA 1)TVS MOTOR COMPANY LIMITED Address of Applicant :JAYALAKSHMI ESTATES NO.29 (32) Priority Date :NA (33) Name of priority country :NA (OLD NO.8) HADDOWS ROAD, CHENNAI 600 006 Tamil (86) International Application No :NA Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)R. SASIKUMAR (61) Patent of Addition to Application Number :NA 2)VENKATA MANGARAJU K Filing Date :NA 3)KRISHNABHATTA NAGARAJA (62) Divisional to Application Number :NA 4)RENGARAJAN BABU Filing Date :NA (57) Abstract : The present invention provides a motorcycle having a low framework structure body frame having a floor board portion; an automated manual transmission equipped engine; a front panel disposed in front portion of body frame ; and an airflow regulating means on the front panel at low floor board portion. No. of Pages : 12 No. of Claims : 8

20961 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3901/CHE/2012 A

(19) INDIA (22) Date of filing of Application :20/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : PROCESS FOR THE CONVERSION OF DYE MOLECULES INTO DYE GAS TO ERADICATE THE DYE EFFLUENT POLLUTION (51) International classification :b01j20/00 (71)Name of Applicant : (31) Priority Document No :NA 1)CHELLAPANDIAN KANNAN (32) Priority Date :NA Address of Applicant :DR.C. KANNAN, M.SC., PH.D., (33) Name of priority country :NA ASSOCIATE PROFESSOR, DEPARTMENT OF CHEMISTRY, (86) International Application No :NA MANONMANIAM SUNDARANAR UNIVERSITY, Filing Date :NA TIRUNELVELI - 627 012 Tamil Nadu India (87) International Publication No : NA (72)Name of Inventor : (61) Patent of Addition to Application Number :NA 1)CHELLAPANDIAN KANNAN Filing Date :NA 2)KUMARASAMY MUTHURAJA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The toxic and energetic dye molecules have been adsorbed on a mixture of adsorbent from dye effluent. The adsorbents are environmentally and thermally stable. Equal amount of all adsorbents are mixed together to form the mixture of adsorbent. The mixture of adsorbents composition will be altered with respect to the dye effluent nature. All the dye molecules present in the effluent will adsorb on the mixture of adsorbents. The dye adsorbed adsorbents are dried and heated above 150°C for producing dye gas. The chemisorbed dyes are cracked at this low temperature and produce the non-toxic dye gas products like hydrogen, methane, ethane, ethylene, acetylene and nitrogen. Dye gas composition will vary with respect to the dye composition of the effluent. This dye gas is a fuel gas. The toxic dye molecule become a non toxic fuel gas is the main application of this invention. No. of Pages : 8 No. of Claims : 8

20962 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3988/CHE/2012 A

(19) INDIA (22) Date of filing of Application :26/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : LAXMI - NARAYAN FLYING CAR (51) International classification :B60S3/00 (71)Name of Applicant : (31) Priority Document No :NA 1)MAHAJAN MAHESH DATTATRAY Address of Applicant :R.S. NO.112/1, DATT KAJU NAGAR, (32) Priority Date :NA MURGUD ROAD, NIPANI - 591 237 Karnataka India (33) Name of priority country :NA (72)Name of Inventor : (86) International Application No :NA Filing Date :NA 1)MAHAJAN MAHESH DATTATRAY (87) International Publication No : NA (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : Lax mi - Narayan Flying Car is based on Inlet and Outlet Air blower system Air blower fan motor is operate on electric motor or any fuel engine Pulling Air from upper side holes and Pushing Air to bottom side from bottom side holes of the Car for Floating (Flying) Car in the Air To move forward , the Air Pulled from front side holes and Push that Air to back side from back side holes of the Car Flying Car can Turn easily Left and Right side when Flying This function is shown in figure (No.3) Flying Car can also Move to Left side and Right side easily Flying Car can go backside by using reverse function of forward function Laxmi - Narayan Flying Car is fully safety For safety purpose, The Car have 1 Netcap on the Inlet holes for avoiding any object comes with Pulling Air to inside blower system 2 Window Glass on bottom side is looking for groundfloor area of the Car 3 Rubber Sole Coating on bottom side of the Car is to protect from electric current and touching any object 4 Maximum weight is on the center of bottom side that helps to make balance while Car Flying in the Air No. of Pages : 22 No. of Claims : 12

20963 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3913/CHE/2011 A

(19) INDIA (22) Date of filing of Application :15/11/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : PEDALING INFLUENCED SPUR GEAR MECHANISM FOR POWER GENERATION (51) International classification :F03B (71)Name of Applicant : (31) Priority Document No :NA 1)NATESAN KANNUSMAY RAMALINGAM Address of Applicant :NO. 37, ANNA STREET, (32) Priority Date :NA (33) Name of priority country :NA KANAGAM, TARAMANI, CHENNAI, POSTAL CODE:600 (86) International Application No :NA 113 Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)NATESAN KANNUSMAY RAMALINGAM (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : Upon pedaling, as usual the crank(2) is driven and the same drives the Free Wheel(3) mounted over Rotating Shaft(4J. And as in case of existing Bi-cycle technique, the rear wheel is mounted on the other end of the Rotating Shaft(4J. But here in fact I have replaced the actual rear wheel with a Spur Gear(5). And this Spur Gear [5), is driven as the Free Wheel(3) rotates! here a Sprocket can also be used instead of Free Wheel). Rotating Shaft is usually a rotating one, and as Rotating Shaft(4) rotates the Free Wheel(3) and Spur Gear(5) are being driven in parallel where all these three make same number of rotation counts. Assume and refer the Figure. I so the Free Wheel|3j and Spur Gear{5) are mounted on the Rotating Shaft(4). And obviously as Rotating Shaft(4J rotates the Spur Gear(5) also rotates in parallel. And the Spur Gear ( S) is actually x-times bigger than the Free Wheel(3). The Free wheel(5) in turn rotates the RPM multiplying Gear Box|6) connected to it. The Gear Box|6), transmits the multiplied rotations to the Elelctricity Generator(8), where the Electricity Generator(8) and Gear Box(6) are connected through Pulleys(7). Hence the resultant RPM towards the Electricity Generator|8) is very much higher and hence that results in excessive Electricity. No. of Pages : 9 No. of Claims : 8

20964 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.3319/CHE/2011 A

(19) INDIA (22) Date of filing of Application :26/09/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : CYBOKNEE - ACTIVE KNEE BRACE WITH INTELLIGENT MOVEMENT DETECTION (51) International classification

:A61H, A61F5/00 :NA :NA :NA :NA :NA : NA :NA :NA :NA :NA

(71)Name of Applicant : 1)S.THIRU MURUGA VEERABAHU Address of Applicant :PLOT NO 70, FIRST LAYOUT TEACHERS COLONY, KOLATHUR CHENNAI - 99 Tamil Nadu India (72)Name of Inventor : 1)S.THIRU MURUGA VEERABAHU

(31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date (57) Abstract : The method of controlling knee movement by active powered knee brace by sensing the users initial movement through motion sensors, force sensors, angle detectors placed with the knee brace itself. This device is designed to serve the purpose of aiding in rehabilitation, proving support to weak muscle thereby in mobility. No. of Pages : 21 No. of Claims : 23

20965 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4058/CHE/2012 A

(19) INDIA (22) Date of filing of Application :28/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : DROWNING VULNERABILITY ASSESSMENT AND INTELLIGENT LIFE GUARD COMMAND CONTROL SYSTEM BASED ON LINEAR STATE SPACE MODELS USING REAL-TIME COMPUTATIONAL VIDEO ANALYTICS (51) International classification :G08B (71)Name of Applicant : (31) Priority Document No :NA 1)VENKATRAMAN BALAJI Address of Applicant :FLAT D 101, ITTINA ABBY (32) Priority Date :NA (33) Name of priority country :NA APARTMENTS, L B SASTRY NAGAR, AIRPORT ROAD, (86) International Application No :NA BANGALORE - 560 017 Karnataka India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)VENKATRAMAN BALAJI (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The present invention provides system and method for drowning accident vulnerability assessment and intelligent life guard system using linear state space models using real-time video computational analytics. The system includes high definition digital video cameras and sensors with embedded video analytics modules deployed in and around the water body, above and below the water surface in the water body. Video analytics modules and sensor modules compute drowning accident vulnerability risk level of swimmers at various levels based on the captured high resolution video images for recognizing, identifying, measuring and computing state space variables of swimmers dynamic state system and water body segment dynamic state system. A drowning accident alert is triggered in case drowning risk level beyond a predetermined threshold value is detected. Continuously drowning vulnerably assessment is performed and appropriate emergency response is applied with rescue management using intelligent life guard system to provide emergency response at various scales. No. of Pages : 80 No. of Claims : 29

20966 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4165/CHE/2012 A

(19) INDIA (22) Date of filing of Application :05/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : WEATHER PROOF SOLAR REFLECTIVE INDEX ROOF TILES (51) International classification :C04B (71)Name of Applicant : (31) Priority Document No :NA 1)MR. VIJAY SHANKAR SHARMA Address of Applicant :IRIS HOUSE, 16 BUSINESS (32) Priority Date :NA (33) Name of priority country :NA CENTRE, NANGAL RAYA, NEW DELHI - 110 046 India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)MR. C.S. MURTHY (87) International Publication No : NA 2)MR. ANIL AGARWAL (61) Patent of Addition to Application Number :NA 3)MR. ALAKESHMAHATA Filing Date :NA 4)MR. R. VINOTHAN (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A weather proof cool roof tile comprising: a) Plastic clay raw materials from about 70 to 80% and minerals from about 20 to 30% and chemical compound of the tile is expressed by Si.sub20 from about 60 to 65% by weight, A1.sub2 0.sub3 from about 16 to 20% by weight, Fe.sub2 0.sub3 from about 6 to 10% by weight, CaO from about 1 to 2% by weight, MgO from about 1 to2 % by weight, Na.sub20 from about 0.5 to 1% by weight, K.sub20 from about 1.5 to 2.5% by weight and LOI is from about 6 to 8% by weight; b) A specialopaque engobe with fine particles of white burning first grade burned ballclay, super white burning vitrofinecalcined clay from EICC, china clay.a snow white burning special gradezir clay as a primary coating and c) A special opaque base glaze with Boron silicate fine particles embedded with nano particles of zirconium and zinc oxide admixtures as a secondary coating. No. of Pages : 24 No. of Claims : 24

20967 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4051/CHE/2012 A

(19) INDIA (22) Date of filing of Application :28/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : REMOTE ASSET MANAGEMENT SYSTEM (51) International classification :G06Q (71)Name of Applicant : (31) Priority Document No :NA 1)SRIKRISHNA M.V. Address of Applicant :102, BRINDAVAN APTS, 117/3 LB (32) Priority Date :NA (33) Name of priority country :NA ROAD, ADAYAR, CHENNAI - 20 Tamil Nadu India (86) International Application No :NA 2)L.N. RAJARAM Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)SRIKRISHNA M.V. (61) Patent of Addition to Application Number :NA 2)L.N. RAJARAM Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The present invention provides a remote asset management system through skilled/semi¬skilled personnel located at different locations in the world to manage a plurality of the remote assets whether stationary or mobile by providing security and restricting unauthorized access and misuse of the remote assets in real time specified operations. No. of Pages : 24 No. of Claims : 9

20968 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4134/CHE/2012 A

(19) INDIA (22) Date of filing of Application :04/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : GUST CHARGER - SELF POWER GENERATING MOBILE CHARGER (51) International classification :H02J (71)Name of Applicant : (31) Priority Document No :NA 1)DIVYA KRISHNAMOORTHY Address of Applicant :603, VTH CROSS STREET, (32) Priority Date :NA (33) Name of priority country :NA KALAIVANAR NAGAR, VANUR TK, VILLUPURAM - 605 (86) International Application No :NA 111 Tamil Nadu India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)DIVYA KRISHNAMOORTHY (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : Mobile chargers are commonly used to charge the mobile phones. We have lot of problems for charging the mobile phones when there is a power cut and absence of mind to put charge for mobile phones. At that time we might be in situation to go out for any other places with low battery which might be lead to switch off conditions for mobiles. In this time important or emergency communications cannot be done. During traveling some vehicles are only provided with chargers. Whenever the battery is low in mobiles during traveling, we depend only on these electrical source chargers. But in this Gust charger, we can generate the power to charge the mobile phones without the external electrical source. The Gust charger is a device, used to charge the mobile phones with the help of the wind energy. In this device, a fan is rotated by the force of wind. This fan in turn rotates the dynamo and the electrical energy is produced. The obtained power is regulated using the PCB regulator. The power that is produced is sent to the mobile phones using the charger pins. Multiple mobile phones can be charged using this gust charger. This device is very simple, compact and can be easily carried from one place to another as like the existing external power source chargers. No. of Pages : 8 No. of Claims : 10

20969 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4049/CHE/2012 A

(19) INDIA (22) Date of filing of Application :28/09/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : NON-WOVEN FABRIC FILTER CARTRIDGE FOR WATER PURIFICATION SYSTEM AND METHOD OF PREPARING THE SAME (51) International classification

:B32B, B01D :NA :NA :NA :NA :NA : NA :NA :NA :NA :NA

(71)Name of Applicant : 1)EUREKA FORBES LIMITED Address of Applicant :SCHEDULE NO.42P-3/C1, MUNESHWARA LAYOUT, HARALUKUNTE, KUDLU, BANGALORE - 560 068 Karnataka India (72)Name of Inventor : 1)DR. RAMAN VENKATESH 2)MR. SURYAKANT GIDDE

(31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date (57) Abstract : The present invention relates to a non-woven fabric filter cartridge for water purification system. More particularly, the present invention relates to a non-woven fibrous media which may be utilized in drinking water purifiers that works on water supply fed through plumbing or gravity. Further this invention also relates to non-woven fabric filter cartridge in which the variants include multilayers of pleated or flat Nonwoven media in various shape, size and configuration. Further this invention also relates to a method of preparing the non-woven fabric filter cartridge for water purification system. No. of Pages : 25 No. of Claims : 10

20970 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4196/CHE/2012 A

(19) INDIA (22) Date of filing of Application :09/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : A PROCESS FOR EXTRACTION OF NEUROSPORENE FROM A NOVEL PHOTOTROPHIC BACTERIUM RHODOBACTER VIRIDS JA 737 AND UTILIZATION THEREOF

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:C12N :NA :NA :NA :NA :NA : NA :NA :NA :NA :NA

(71)Name of Applicant : 1)EEDERA VEERA VENKATA RAMAPRASAD Address of Applicant :RESEARCH SCHOLAR (CSIR-SRF), BACTERIAL DISCOVERY LABORATORY, CENTRE FOR ENVIRONMENT, INSTITUTE OF SCIENCE AND TECHNOLOGY, J.N.T. UNIVERSITY HYDERABAD, KUKATPALLY, HYDERABAD - 500 085 Andhra Pradesh India 2)CHINTALAPATI SASIKALA 3)CHINTALAPATI VENKATA RAMANA (72)Name of Inventor : 1)EEDERA VEERA VENKATA RAMAPRASAD 2)CHINTALAPATI SASIKALA 3)CHINTALAPATI VENKATA RAMANA

(57) Abstract : Neurosporene is a tetraterpenoid found in plants, photosynthetic bacteria, fungi, and algae and serves as a precursor for more than six hundred carotenoids. The yield of this pigment in above organisms is very low and sofar they are no methods were reported on commercial production of neurosporene. However in the many field there is exists a very great demand for neurosporene in feed, food, cosmetic and pharmaceutical sector. This invention related to cultivation of Rhodobacter viridis JA737 for production, extraction and purification of neurosporene in large scale from a novel phototrophic bacterium, Rhodobacter viridis JA737 by simple steps with high purity, which is considered to be suitable for mass production. The final product is a fine crystalline powder with low residual solvents. The process provides pure neurosporene (98%). A sunscreen oil was prepared with neurosporene in coconut oil or vegetable oil. No. of Pages : 23 No. of Claims : 10

20971 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4199/CHE/2012 A

(19) INDIA (22) Date of filing of Application :09/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : NUTRACEUTICAL COMPOSITION FOR REDUCING OBESITY (51) International classification :A23L (71)Name of Applicant : (31) Priority Document No :NA 1)CARE BIOLOGICALS PRIVATE LIMITED Address of Applicant :PLOT NO.2-22-4/5, FLAT NO.103, (32) Priority Date :NA (33) Name of priority country :NA SIKHARADRI TOWERS, VIVEKANANDANAGAR COLONY, (86) International Application No :NA KUKATPALLY, HYDERABAD - 500 072 Andhra Pradesh India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)BRAMHANADA SINGH GHAN SINGH (61) Patent of Addition to Application Number :NA 2)NARSIMHA REDDY BOMMINENI Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A method of preparing a nutraceutical powdered beverage composition comprises a soy protein isolate with a milk/casein protein isolate, adding predetermined amount of carbohydrates (fruit concentrate in dextrose, fructose, barley malt extract and/or other carbohydrates.,), a predetermined amount of soluble dietary fiber and citri fiber to the admixture, incorporating a predetermined amount of potent sweetener, multivitamins, minerals and a predetermined amount of natural fat burners along with the natural flavor in the blender. The powdered beverage composition is then milled to obtain a homogenized powdered beverage composition and the homogenized powdered beverage composition is dried at a predefined temperature under vacuum to obtain a dried powdered beverage composition. The dried powdered beverage composition is further subjected to granular filtration to obtain the protein rich powdered beverage. No. of Pages : 18 No. of Claims : 10

20972 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4326/CHE/2012 A

(19) INDIA (22) Date of filing of Application :17/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : SYSTEM AND METHOD FOR EVALUATING A VIDEO RESUME AND CONDUCTING A VIDEO BASED INTERVIEW OF A JOB SEEKER (51) International classification :G06Q (71)Name of Applicant : (31) Priority Document No :NA 1)SURYANARAYANA GANNE (32) Priority Date :NA Address of Applicant :1ST CROSS, 6TH LANE, SRI RAM (33) Name of priority country :NA NAGAR, ELURU - 534 003 Andhra Pradesh India (86) International Application No :NA 2)SAROJA AKKINENI Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)SAROJA AKKINENI (61) Patent of Addition to Application Number :1614/CHE/2012 2)SURYANARAYANA GANNE Filed on :24/04/2012 (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A system and method for evaluating a video resume and conducting a video based interview of a job seeker is disclosed. The system further includes a centralized database for storing a video resume, a plurality of interview questions, a plurality of job requirements, a recorded video of an interview. An authenticating server for enabling a secured login to the plurality of job seekers through a network device. An automated interview management module and an automated interview reviewing module in communication with the centralized database and the authenticating server configured to conduct and record the interview of the job seeker and enabling the plurality of employers to evaluate the video based resume and to review the recorded video of an interview respectively. No. of Pages : 28 No. of Claims : 22

20973 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.433/CHE/2011 A

(19) INDIA (22) Date of filing of Application :15/02/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : DISCOVERY OF ECO FRIENDLY BIO-DEGRADABLE PAPER CUP BLANKS & PAPER CUPS COATED WITH ECO CLASSICS 60 (M2960 ETHYLENE ACRYLIC) WHICH IS A WATER BASE FOOD GRADE COATING (51) International classification :B31B (71)Name of Applicant : (31) Priority Document No :NA 1)CHANDRAGANTI SUBBA RAO (32) Priority Date :NA Address of Applicant :25-F, RANJITH ROAD, (33) Name of priority country :NA KOTTURPURAM, CHENNAI - 600 085 Tamil Nadu India (86) International Application No :NA 2)HAMSINI SUBBA RAO Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)CH.SUBBA RAO (61) Patent of Addition to Application Number :NA 2)HAMSINI SUBBA RAO Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : We claim that Eco Classics 60 (M 2960 Ethylene Acrylic) is our discovery to obtain an Eco friendly Bio degradable paper cup when coated. No. of Pages : 5 No. of Claims : 2

20974 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4158/CHE/2012 A

(19) INDIA (22) Date of filing of Application :05/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : SMART COCONUT PLUCKING MACHINE

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : 1)R.I. VIGNESH :A23N Address of Applicant :KS-01, NIRMAL BLOCK, AGRINI :NA APPARTMENTS, ANDALPURAM, MADURAI - 625 003 :NA Tamil Nadu India :NA 2)S. VIGNESH RAJA :NA 3)M. MUTHURAJESH :NA 4)C. KARTHIK : NA 5)T. MANOJ :NA (72)Name of Inventor : :NA 1)R.I. VIGNESH :NA 2)S. VIGNESH RAJA :NA 3)M. MUTHURAJESH 4)C. KARTHIK 5)T. MANOJ

(57) Abstract : I claim, the usage of frustum rollers may be more efficient and I may have a consideration of changing the shape of the rollers in future. The shape rollers may be changed as per the requirements. No. of Pages : 12 No. of Claims : 5

20975 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4274/CHE/2012 A

(19) INDIA (22) Date of filing of Application :12/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : PROCESSED SWEET CORN WITH EXTENDED SHELF LIFE IN RETORT POUCHES STORABLE UNDER AMBIENT CLIMATE OF 32°C (51) International classification :A23L (71)Name of Applicant : (31) Priority Document No :NA 1)JANARDHAN LINGA SWAHAR HARIHARAN (32) Priority Date :NA Address of Applicant :SWAYAM FOODS, NO: 16, KAVERI (33) Name of priority country :NA AVENUE, SALEM 636 004 Tamil Nadu India (86) International Application No :NA (72)Name of Inventor : Filing Date :NA 1)JANARDHAN LINGA SWAHAR HARIHARAN (87) International Publication No : NA 2)VIJAY REDDY. H (61) Patent of Addition to Application Number :NA 3)VIJAY KUMAR. R Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A process for preparing edible corn in retort pouches with extended shelf life without loosing its original taste and texture. The process begins right from seed selection, sowing, manuring, harvesting, travel, pre-processing, quality inspection involving microbial inspection and other parameters, packaging , retorting in customized pouches and shipment. The process does not make use of any chemical additives, preservatives, artificial flavouring agents or colour enhancers and is carried within customized retort pouches which are highly resistant to stress cracks. Further they have a shelf life of about 12 months and can be stored at 32°C without any spoilage. No. of Pages : 13 No. of Claims : 13

20976 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.4325/CHE/2012 A

(19) INDIA (22) Date of filing of Application :17/10/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : SYSTEM AND METHOD UTILIZED FOR PROPELLING A SOLAR POWERED WHEELED MOTOR VEHICLE (51) International classification :B60L (71)Name of Applicant : (31) Priority Document No :NA 1)PUTTA HIMAVANTH REDDY (32) Priority Date :NA Address of Applicant :PLOT NO. 6, GREENHILLS (33) Name of priority country :NA COLONY, STREET NO. 8, HABSIGUDA, HYDERABAD - 500 (86) International Application No :NA 007 Andhra Pradesh India Filing Date :NA 2)RAJURI RAVITEJA (87) International Publication No : NA 3)ANUGULA ARUN KUMAR (61) Patent of Addition to Application Number :NA (72)Name of Inventor : Filing Date :NA 1)PUTTA HIMAVANTH REDDY (62) Divisional to Application Number :NA 2)RAJURI RAVITEJA Filing Date :NA 3)ANUGULA ARUN KUMAR (57) Abstract : System and method utilized for propelling a solar powered wheeled motor vehicle are disclosed. The wheeled motor vehicle includes multiple photo voltaic panels for generating an electric power, a current control unit converts the electric power into first predetermined power level, multiple electrical energy storage banks comprising multiple electrical energy storage devices stores the first predetermined power level and generates second predetermined power level, a first converter unit reconverts the second predetermined power level to first predetermined power level, a brake sensor determines position of multiple windings and calculates return electro motive force, a second converter unit converts the first predetermined power level to third predetermined power level, a motion position sensor to sense the multiple windings positioned nearer to the ground, a buck converter converts the third predetermined power level to second predetermined power level and a master current break switch automatically controls the electric power transmitted to the multiple electronically commutated motors attached to the wheels. No. of Pages : 27 No. of Claims : 10

20977 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1426/KOL/2010 A

(19) INDIA (22) Date of filing of Application :22/12/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : A CHEMILUMINESCENCE IMMUNOASSAY KIT FOR THE EARLY DETECTION OF DENGUE IGM ANTIBODIES IN HUMAN SERUM OR PLASMA (51) International classification :G01N35/00 (71)Name of Applicant : (31) Priority Document No :NA 1)MAHAJAN, LALIT (32) Priority Date :NA Address of Applicant :1-D, MANHAR MAHAL, 4 BAKUL, (33) Name of priority country :NA BAGAN ROA, BEHIND LANSDOWNE MKT, KOLKATA-700 (86) International Application No :NA 025, West Bengal India Filing Date :NA (72)Name of Inventor : (87) International Publication No : NA 1)MAHAJAN, LALIT (61) Patent of Addition to Application Number :NA Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : The present invention, Chikungunya IgM CLIA kit designed for the in vitro qualitative detection of Chikungunya IgM in human serum or plasma is used as a screening test for the testing of collected blood prior to the transfusion. It is an in vitro qualitative chemiluminescence immunoassay for the detection of Chikungunya IgM antibody in human serum or plasma. It is a highly sensitive technique which detects the chikungunya IgM antibody present in human serum or plasma. The diagnostic kit comprises of a microwell which is immobilized with CHIK-E1 antigen or CHIK - E2 antigen or a combination there of. The kit also includes enzyme conjugate, conjugate diluent, diluent buffer, luminol substrate, substrate diluent, positive control, negative control, calibrator, sample diluent and wash buffer. No. of Pages : 21 No. of Claims : 7

20978 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.729/KOL/2012 A

(19) INDIA (22) Date of filing of Application :03/07/2012

(43) Publication Date : 09/11/2012

(54) Title of the invention : DEVELOPMENT OF ELASTOMERIC BASED ANTICORROSIVE COATING AND METHOD OF APPLICATION ON OUTER SURFACE OF METAL PIPES LAID UNDERGROUND / SURFACE TO AUGMENT SERVICE LIFE IN CONVEYING DRINKING WATER, OILS, GASES, CHEMICALS AND MUNICIPAL SEWERAGE (51) International classification :C08L23/16 (71)Name of Applicant : (31) Priority Document No :NA 1)BANERJEE BIRESWAR Address of Applicant :B - 12/3, KARUNAMOYEE ESTATE, (32) Priority Date :NA SALT LAKE, KOLKATA - 700 091, West Bengal India (33) Name of priority country :NA (86) International Application No :NA 2)PAL DR. SAMIR KUMAR (72)Name of Inventor : Filing Date :NA (87) International Publication No : NA 1)BANERJEE BIRESWAR (61) Patent of Addition to Application Number :NA 2)PAL DR. SAMIR KUMAR Filing Date :NA (62) Divisional to Application Number :NA Filing Date :NA (57) Abstract : A new improved elastomer based durable cement composition for application in anticorrosive coating on metal pipes lay underground / surface for conveying drinking water, chemicals, oils, natural gases and municipal sewerage. The selection of polychloroprene elastomer blended with whole tyre reclaim (WTR) offer excellent adhesion with metal surface and outstanding paintability property with covering of higher surface area that have excellent flexibility and good mechanical property, and high abrasion resistance when the coated film is dried. The basic polychloroprene elastomer formula; [-CH2 CH=Cr Cl)CH2 -]n Wherein The elastomer contains a halogen in molecular backbone provides the properties of flame and heat resistance. No. of Pages : 13 No. of Claims : 9

20979 The Patent Office Journal 09/11/2012

Publication After 18 Months: The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.10002/DELNP/2011 A (19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD FOR MONITORING A VICINITY USING SEVERAL ACOUSTIC SENSORS (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :G08B 13/16 :10 2009 034 444.6 1)SIEMENS AKTIENGESELLSCHAFT Address of Applicant :WITTELSBACHERPLATZ 2, 80333 :23/07/2009 MUNCHEN, GERMANY. :Germany :PCT/EP2010/057518 (72)Name of Inventor : :31/05/2010 1)GERDES; CHRISTOPH :WO 2011/009666 2)HOFER; JOACHIM 3)SOMMER; ELMAR :NA :NA :NA :NA

(57) Abstract : The invention relates to a method for monitoring a vicinity using a plurality of acoustic sensors (1, 2, 3, 4), which form a decentralized net (N), in which the sensors (1, 2, 3, 4) communicate with one another, at least in part, wherein the respective sensors (1, 2, 3, 4) register acoustic signals based on noises in the vicinity, and reprocess the registered signals to conduct a situation recognition. According to the method of the invention, a respective sensor (1, 2, 3, 4) of at least some of the sensors (1, 2, 3, 4) accesses, via the decentralized net (N), the registered and/or reprocessed signals of one, or several, adjacent sensors (1, 2, 3, 4), and takes these signals into account for the situation recognition, wherein an adjacent sensor (1, 2, 3, 4) registers signals, which, at least in part, are based on the same noises as the ones registered by the respective sensor (1, 2, 3,4). Figure 1

No. of Pages : 20 No. of Claims : 19

20980 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10003/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : RESOURCE ALLOCATION METHOD FOR DYNAMIC MULTIPLEXING OF MULTIMEDIA BROADCAST MULTICAST SERVICE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H04W 28/00 :200910150616.6 :19/06/2009 :China :PCT/CN2009/076335 :31/12/2009 :WO 2010/145185 :NA :NA

(71)Name of Applicant : 1)ZTE CORPORATION Address of Applicant :ZTE PLAZA, KEJI ROAD SOUTH, HI-TECH INDUSTRIAL PARK, NANSHAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE 518057, P.R. CHINA. (72)Name of Inventor : 1)AL, JIANXUN 2)MA, ZIJIANG 3)MAO, LEI

:NA :NA

(57) Abstract : A resource allocation method for dynamic multiplexing of Multimedia Broadcast Multicast Service (MBMS) can be used to improve resource utilization efficiency when multimedia multicast services share a channel. A network side device configures a Modulation and Coding Scheme (MCS) for said logical channels or the Multicast/Broadcast over Single Frequency Network (MBSFN) subframes bearing said logical channels according to the transmission requirements of logical channels, and implements modulation and coding processing for the data of Physical Multicast Channel (PMCH) borne by MBSFN subframes bearing said logical channels by using said MCS. The network side device can employ different modulation and coding in the physical layer according to different Quality of Service (QoS) requirements of different logical channels of MBMS services, thereby achieving the purpose of improving resource utilization efficiency and satisfying different service requirements.

No. of Pages : 33 No. of Claims : 20

20981 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10006/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : LEVELING FEET FOR HOUSEHOLD APPLIANCES (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:F16M 7/00 (71)Name of Applicant : :MU 8901408-1 1)ELECTROLUX DO BRASIL SA :10/06/2009 Address of Applicant :RUA MINISTRO GABRIEL PASSOS, :Brazil 360, GUABIROTUBA, 81.520-900 CURITIBA-PR, BRAZIL :PCT/BR2010/000195 (72)Name of Inventor : :10/06/2010 1)AMARAL, GUSTAVO GNOATTO :WO 2010/142010 2)DAVIN, ADRIANO 3)PAGNOZZI, RODRIGO MARGE :NA :NA :NA :NA

(57) Abstract : Leaving feet with embedded castors (3) allowing the leveling by the plastic thread to fasten the product, enabling remove the castor (3) from the floor. They have one base (2), preferably metallic connected to the internal ring (6), which contains the thread in the external surface. There is also the external ring (1) moving vertically on the thread of said internal ring (6), delimiting the height where the base (2) is supported, enabling therefore the leveling of the household appliance smoothly in view of the low ration step/diameter

No. of Pages : 13 No. of Claims : 5

20982 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10013/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : A METHOD OF TERMITE PROOFING A BUILDING STRUCTURE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:E04 1/72 (71)Name of Applicant : :2009902838 1)TERMORTAR PTY LTD :19/06/2009 Address of Applicant :75 LAMBTON ROAD, :Australia BROADMEADOW, NSW 2292, AUSTRALIA. :PCT/AU2010/000750 (72)Name of Inventor : :17/06/2010 1)SADDINGTON, DAVID LEES :WO 2010/144963 :NA :NA :NA :NA

(57) Abstract : A method of termite proofing a building structure (1, 101), the building structure (1, 101) has a foundation (3) located below an adjacent finished ground level (5) and an external wall (2, 102) formed on the foundation (3) and defining an exterior surface (4, 104) of the building structure (1, 101). The exterior surface (4, 104) is defined at least in part by a cementitious material. The method comprises applying a curable composition (9) to the cementitious material throughout a lower region (8, 108) of the exterior surface (4, 104) extending from the foundation (3) to a predetermined height above the finished ground level (5), such that the composition (9) penetrates into and is retained within the cementitious material. The composition is allowed to cure within the cementitious material throughout the lower region (8). The said composition (9) cures within the cementitious material, thereby protecting the cementitious material against intrusion by termites.

No. of Pages : 14 No. of Claims : 17

20983 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10022/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : PERSISTENT MEDIA PLAYBACK (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:G06Q 50/00 (71)Name of Applicant : :12/488,195 1)MICROSOFT CORPORATION :19/06/2009 Address of Applicant :ONE MICROSOFT WAY, :U.S.A. REDMOND, WASHINGTON 98052-6399, U.S.A. :PCT/US2010/039112 (72)Name of Inventor : :18/06/2010 1)GIBSON, CHAD, C. :WO 2010/148270 2)TAHIR, SARA 3)EVANS, CHRISTOPHER, A. :NA 4)PINA, MARCUS E. :NA 5)MAINS, RICHARD L. :NA :NA

(57) Abstract : Persistent media playback techniques are described. In an implementation, a media player is served via a network for display by a browser of a device. Web pages are served via the network for display by the browser of the device. Each of the web pages is configured for integration with the media player so that the media player is persistently displayed by the browser during navigation among the web pages. The media player may be configured to play media files providing a variety of different media types. The media player may also provide contextual suggestions of media.

No. of Pages : 25 No. of Claims : 14

20984 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10023/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : CONTROLLING AD DELIVERY TO MOBILE CLIENTS (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:G06Q 30/00 (71)Name of Applicant : :12/487,118 1)MICROSOFT CORPORATION :18/06/2009 Address of Applicant :ONE MICROSOFT WAY, :U.S.A. REDMOND, WASHINGTON 98052-6399, U.S.A. :PCT/US2010/039011 (72)Name of Inventor : :17/06/2010 1)JAFFRI, TAQI :WO 2010/148210 :NA :NA :NA :NA

(57) Abstract : Systems and methods for controlling ad delivery to mobile clients while maintaining user privacy are herein provided. One exemplary method involves a location broker service. The method includes receiving, at an ad delivery service, a location use token from a mobile client, which may be a single use token. The method includes sending, from the ad delivery service, the location use token to the location broker service for verification at the location broker service. The method includes receiving, at the ad delivery service, the mobile client location from the location broker service based on the verification. The method includes delivering, from the ad delivery service, a location-targeted ad to the mobile client at the mobile client location, where the delivering is further based on a geographic density of a plurality of mobile clients. An advertiser using the ad delivery service may be billed based on location use token history.

No. of Pages : 24 No. of Claims : 15

20985 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10026/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD FOR ENCODING AND DECODING IMAGES, ENCODING AND DECODING DEVICES, CORRESPONDING DATA STREAM AND COMPUTER PROGRAM (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :H04N 7/26 :0954289 1)FRANCE TELECOM Address of Applicant :6 PLACE D' ALLERAY, 75015 :23/06/2009 PARIS, FRANCE :France :PCT/FR2010/051213 (72)Name of Inventor : :17/06/2010 1)CAMMAS NATHALIE :WO 2010/149900 2)AMONOU ISABELLE 3)PATEUX STEPHANE :NA :NA :NA :NA

(57) Abstract : The invention relates to a method for encoding an image sequence, including the following steps, for at least one group of blocks of an image: determining (21), for each block, at least one parameter characteristic of said block; forming at least one cluster including the blocks having at least one similar characteristic parameter; encoding (24) the blocks of said cluster, the similar characteristic parameter(s) associated with said cluster being encoded only once; encoding (23) the blocks that do not belong to any cluster, the characteristic parameter(s) associated with each of said blocks not being encoded. Such a method also includes the steps of generating (25) a data stream and inserting (26), into said stream, at least one piece of information on the partitioning of the group(s), in order to identify the outer block(s) within a group.

No. of Pages : 34 No. of Claims : 10

20986 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10244/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :26/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : COMPOSITE A1 MATERIAL FOR DRAWN AND IRONED CAN (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:B32B 15/08 (71)Name of Applicant : :JP2009-144257 1)TOYO KOHAN CO., LTD. :17/06/2009 Address of Applicant :2-12, YONBAN-CHO, CHIYODA-KU, :Japan TOKYO 102-8447, JAPAN. :PCT/JP2010/002163 (72)Name of Inventor : :26/03/2010 1)TAKAAKI OKAMURA :WO 2010/146755 2)HIROAKI TOGO 3)TAKASHI SUGIMURA :NA :NA :NA :NA

(57) Abstract : Provided is a composite Al material for a drawn and ironed can from which a drawn and ironed can having brightness can be formed. In a resin coated metal plate used for forming a drawn and ironed can, a first resin layer (20) having a thickness of 0.02 to 2µm is formed on a surface of an Al plate 10 which forms an outer surface of the can, and a second resin layer 30 having a thickness of 1 to 40µm is formed on a surface of the Al plate 10 which forms an inner surface of the can. In a penetration test using a TMA device, an insertion amount of a quartz pin when a load of 5g is applied to the first resin layer at a temperature of 100°C is 20% or less of a film thickness of the first resin layer. Further, the first resin layer has a room temperature of 10N/mm2 or more.

No. of Pages : 32 No. of Claims : 5

20987 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10050/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :20/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : TRANSMITTING APPARATUS, TRANSMITTING METHOD, RECEIVING APPARATUS, AND RECEIVING METHOD (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :H04N 13/00 :2010-102347 1)SONY CORPORATION Address of Applicant :1-7-1 KONAN, MINATO-KU, :27/04/2010 TOKYO 1080075, JAPAN. :Japan :PCT/JP2011/060196 (72)Name of Inventor : :26/04/2011 1)IKUO TSUKAGOSHI :WO 2011/136239 :NA :NA :NA :NA

(57) Abstract : To allow the receiver side that receives a transport stream TS including a first video stream having two-dimensional image data inserted thereinto and a second video stream having the three-dimensional image data inserted thereinto in a time multiplexed manner to perform an appropriate and efficient process. [Solution] First identification information and second identification information are inserted into the transport stream TS. The first identification information is identification information indicating whether a video stream included in the stream TS is the first video stream or the second video stream. The second identification information is identification information indicating whether the first identification information has been inserted or not. 3D signaling information including the first identification information is inserted into a user data area of one of a picture header and a sequence header. The second identification information is included in a video stream descriptor inserted and placed under a video elementary loop of a PMT.

No. of Pages : 92 No. of Claims : 18

20988 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10135/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :22/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : IMAGE PROCESSING DEVICE AND IMAGE PROCESSING METHOD (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H04N 13/02 (71)Name of Applicant : :P2009-156562 1)SONY CORPORATION :01/07/2009 Address of Applicant :1-7-1 KONAN, MINATO-KU, :Japan TOKYO 1080075, JAPAN. :PCT/JP2010/060604 (72)Name of Inventor : :23/06/2010 1)YOSHITOMO TAKAHASHI :WO 2011/001864 2)TERUHIKO SUZUKI 3)TAKUYA KITAMURA :NA 4)YOICHI YAGASAKI :NA :NA :NA

(57) Abstract : The present invention relates to an image processing device and an image processing method whereby encoding efficiency of image prediction encoding can be improved. A horizontal processing unit 31 performs horizontal packing as horizontal processing to manipulate the horizontal-direction array of pixels of each of a first thinned-out image and a second thinned-out image arrayed in checkerboard fashion, obtained by thinning out the pixels of each of a first image and a second image different from the first image every other line in an oblique direction, wherein pixels of first and second thinned-out images are packed in the horizontal direction. A combining unit 33 generates a combined image which is combined by adjacently arraying the post-horizontal processing first and second thinned-out images after horizontal processing, as an image to serve as the object of prediction encoding. The present invention can be applied to a case of performing prediction encoding on a fist and second image, such as an L (Left) image and R (Right) image making up a 3D image or the like, for example.

No. of Pages : 228 No. of Claims : 20

20989 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1209/DEL/2010 A

(19) INDIA (22) Date of filing of Application :25/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : PROCESS FOR PREPARING PURE ARGATROBAN (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61K :NA :NA :NA :NA :NA :NA :NA :NA :NA :NA

(71)Name of Applicant : 1)IND-SWIFT LABORATORIES LIMITED Address of Applicant :S.C.O. NO. 850, SHIVALIK ENCLAVE, NAC MANIMAJRA, CHANDIGARH-160 101 INDIA. (72)Name of Inventor : 1)BHIRUD SHEKHAR BHASKAR 2)AGGARWAL ASHVIN KUMAR 3)MISHRA SUSHANTA 4)SHARMA AJAY KUMAR

(57) Abstract : The present invention provides a process for preparing pure argatroban of formula I, having reduced level of impurities by optimizing the reaction conditions of different stages. The present invention also provides novel impurities of argatroban and methods of identifying as well quantifying impurities.

No. of Pages : 35 No. of Claims : 10

20990 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1219/DEL/2010 A

(19) INDIA (22) Date of filing of Application :26/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : VIBRIOCIDAL FORMULATION CONTAINING RED ALGA FALKENBERGIA HILLEBRANDII EXTRACT FOR PREVENTION/CONTROL OF VIBRIOSIS IN SHRIMP AQUACULTURE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61K (71)Name of Applicant : :NA 1)DEPARTMENT OF BIOTECHNOLOGY Address of Applicant :BLOCK-2, 7TH FLOOR, CGO :NA COMPLEX, LODI ROAD, NEW DELHI-110 003. India :NA :NA 2)BHARATHIDASAN UNIVERSITY (72)Name of Inventor : :NA :NA 1)JOSEPH SELVIN :NA :NA :NA :NA

(57) Abstract : This invention relates to a Newly developed product which includes methanolic extract of F. hillebrandii characterized as broadspectrum antimicrobial agent with potential shrimp Vibriocidal activity and the process comprising steps of extraction of antimicrobial agents wherein a definite quantity 500 g of dried algal powder is submerged in 2000 ml of methanol and placed at 35°C on a shaker at 120 rpm for two weeks, followed by filtering after 2 days using what man fitter paper No 1, collecting the supernatant and concentrating the solvent in a rotary vacuum evaporator at 40 °C, purification and chemical elucidation of highly active fraction.

No. of Pages : 31 No. of Claims : 2

20991 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1206/DEL/2010 A

(19) INDIA (22) Date of filing of Application :24/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : A CONTINUOUS FLOW IRRIGATION ENDOSCOPE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61B (71)Name of Applicant : :NA 1)ATUL KUMAR Address of Applicant :11 RATHORE NAGAR, QUEENS :NA :NA ROAD, VAISHALI NAGAR, JAIPUR 302 021, Rajasthan India :NA 2)ALKA KUMAR :NA (72)Name of Inventor : :NA 1)ATUL KUMAR :NA 2)ALKA KUMAR :NA :NA :NA

(57) Abstract : The present invention is a system of reducing the outer diameter or the outer cross sectional size of continuous flow irrigation endoscope without reducing the outer diameter or the cross sectional size of any or all of the components such as the telescope, the endoscopic instrument/s, the inflow fluid channel and the outflow fluid channel. The endoscope related to the present invention comprises of only a single sheath only which simultaneously performs the dual function of both, the inflow fluid channel and the outflow fluid channel. The inflow and the outflow fluid flow channels are fluidly separated by a rigid sheet whose free parallel edges make a fluid tight approximation or contact with the said single sheath of the endoscope.

No. of Pages : 37 No. of Claims : 20

20992 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1207/DEL/2010 A

(19) INDIA (22) Date of filing of Application :24/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : SAFELY DISPOSABLE CANNULA DEVICE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61B :NA :NA :NA :NA :NA :NA :NA :NA :NA :NA

(71)Name of Applicant : 1)MALHOTRA, SAMARTH Address of Applicant :C/O WELLMED INTERNATIONAL INDUSTRIES PVT. LTD., 712 ARUNACHAL BUILDING, 19 BARAKHAMBA ROAD, NEW DELHI-11001, INDIA (72)Name of Inventor : 1)MALHOTRA, SAMARTH

(57) Abstract : Embodiments of a safety module for a needle in a disposable cannula device are disclosed. Accordingly, the safety module includes two arms inclined to each other and defining a cavity between one end of each of the two arms. The cavity slidably rests against an outer surface of the needle disposed between the two arms thereby defining a first contact surface between the two arms and the needle. The safety module further includes a connecting member joining the other two ends of the arms, the connecting member having a circular through hole such that the center of the through hole and the first contact surface define an axis along which the needle moves while passing through the hole. The safety module also includes two flange components extending from the two ends of the arms from the first contact surface and two module locking components extending from the two flange components configured to securely engage the safety module to the disposable cannula device. The safety module further includes a lance fixed at one of the arms, having a semi-cylindrical cavity resting against the needle defining a second contact surface. The lance can be configured to securely engage in a slot on the other arm. The safety module also includes a base component attached to the two arms and the connecting member in such a manner that a first tension acts at the first contact surface between the two arms and the needle and a second tension acts at the second contact surface between the lance and the needle.

No. of Pages : 48 No. of Claims : 21

20993 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1207/DEL/2011 A

(19) INDIA (22) Date of filing of Application :25/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD AND SYSTEM FOR LOADING AND UNLOADING CARTRIDGES INTO A MAGAZINE FOR FIREARMS (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :B27N :TO2010A000352 1)OTO MELARA SPA Address of Applicant :VIA VALDILOCCHI, 15-19136 LA :27/04/2010 SPEZIA, ITALY :Italy (72)Name of Inventor : :NA :NA 1)ANDREA CHIAPPINI :NA 2)MICHELE SCHETTINI :NA :NA :NA :NA

(57) Abstract : System for loading and unloading cartridges into/from a magazine for firearms. Said firearm comprising a breech or firing chamber 101 where the cartridge is made to explode, and a mouth portion 102 adapted to cause the cartridge to pass from the magazine to the breech. Said magazine being engaged to said breech and comprising a plurality of chambers 21 sequentially mobile with respect to breech 101 itself so as to present one after another in the loading position in which a charging mechanism 7 inserts the cartridge into breech 101, in which each single chamber 21 can slide independently on at least one track 22 placed on the magazine longitudinally with respect to the axis X of breech 101.

No. of Pages : 33 No. of Claims : 12

20994 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1221/DEL/2010 A

(19) INDIA (22) Date of filing of Application :26/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : PROCESS FOR PREPARING PREGABALIN (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filed on (62) Divisional to Application Number Filing Date

:C07C :NA :NA :NA :NA :NA :NA :1614/DEL/2009 :03/08/2009 :NA :NA

(71)Name of Applicant : 1)HELVETICA INDUSTRIES (P) LIMITED Address of Applicant :A-1, COMMUNITY CENTER, NARAINA INDUSTRIAL AREA-PHASE II, NEW DELHI 110028 India (72)Name of Inventor : 1)DR.B.S. PRADHAN

(57) Abstract : A process for preparation of resolved (±)-3-Aminomethyl-5-methylhexanoic or pregablin

No. of Pages : 10 No. of Claims : 6

20995 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10033/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : NANOEMULSION VACCINES (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61K :61/187,529 :16/06/2009 :U.S.A. :PCT/US2010/038854 :16/06/2010 :NA :NA :NA

(71)Name of Applicant : 1)THE REGENTS OF THE UNIVERSITY OF MICHIGAN Address of Applicant :2ND FLOOR, 1214 SOUTH UNIVERSITY AVENUE, ANN ARBOR, MICHIGAN 481042592, U.S.A. (72)Name of Inventor : 1)LUKACS, NICHOLAS W. 2)LINDELL, DENNIS M. 3)BAKER, JR., JAMES R.

:NA :NA

(57) Abstract : The present invention provides methods and compositions for the stimulation of immune responses. Specifically, the present invention provides immunogenic nanoemulision compositions and methods of using the same to induce immune responses (e.g., immunity (e.g., protective immunity)) against a pathogenic virus of the paramyxoviridae family (e.g., a Paramyxovirinae virus (e.g., Paramyxovirus, Rubulavirus and/or Morbillivirus) and/or a Pneumovirinae virus (e.g., respiratory syncytial virus))). Compositions and methods of the present invention find use in, among other things, clinical (e.g. therapeutic and preventative medicine (e.g., vaccination)) and research applications.

No. of Pages : 121 No. of Claims : 27

20996 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10034/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :19/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD AND APPARATUS FOR MAPPING MULTI-STANDARD IQ DATA BASED ON CPRI (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H04B 7/26 :201010186638.0 :25/05/2010 :China :PCT/CN2010/079289 :30/11/2010 :WO 2011/147172 :NA :NA

(71)Name of Applicant : 1)ZTE CORPORATION Address of Applicant :ZTE PLAZA, KEJI ROAD, SOUTH, HI-TECH INDUSTRIAL PARK, NANSHAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE 518057, P.R. CHINA. (72)Name of Inventor : 1)LIN, YUPING 2)DU, CHAO 3)GUO, DANDAN

:NA :NA

(57) Abstract : The invention provides a method for IQ data mapping, including the following steps of: mapping IQ data of one or more standards to a CPRI radio frame, wherein, the CPRI radio frame includes multiple multi-frames, and boundaries of the multi-frames are aligned with the header of the CPRI radio frame, and each multi-frame includes K basic frames, and each basic frame includes a plurality of IQ sub-containers, and one IQ sub-container constitutes one time slot, and the number K of the basic frames and bit widths Naxc of the IQ sub-containers included in each multi-frame are identical for different standards, and the length of the CPRI radio frame is 1 Oms. The invention also provides an IQ data mapping apparatus.

No. of Pages : 35 No. of Claims : 15

20997 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10368/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :28/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : WORKING LIQUID AND DEVICE UTILIZING SAME (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:C01M (71)Name of Applicant : :2009-144620 1)BRIDGESTONE CORPORATION :17/06/2009 Address of Applicant :10-1, KYOBASHI 1-CHOME, CHUO:Japan KU, TOKYO 104-8340, JAPAN. :PCT/JP2010/004057 (72)Name of Inventor : :17/06/2010 1)UEKI AKIRA :WO 2010/146868 2)NAGASHIMA YASUYUKI 3)YANAGIDA MOTOHIRO :NA 4)SUZUKI YASUHIRO :NA 5)ISHIYAMA TATSUROU :NA 6)TASHIRO KATSUMI :NA

(57) Abstract : Provided is a working fluid which is sealed in a liquid-sealed space in a device to be used, including: a first liquid and a second liquid which are insoluble with each other, wherein a weight of the second liquid contained is smaller than that of the first liquid, and the second liquid has a higher vapor pressure than that of a main component of the first liquid at the same temperature.

No. of Pages : 27 No. of Claims : 9

20998 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1217/DEL/2010 A

(19) INDIA (22) Date of filing of Application :26/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : DEVICE FOR POWER CONTROL AND STORM SECURITY FOR SAVONIUS WIND TURBINE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:F03D :NA :NA :NA :NA :NA :NA :NA :NA :NA :NA

(71)Name of Applicant : 1)INDIAN INSTITUTE OF TECHNOLOGY , KANPUR. U.P. Address of Applicant :DEAN RESEARCH AND DEVELOPMENT, 255, FACULTY BUILDING, IIT KANPUR. KANPUR 208016 Uttar Pradesh India (72)Name of Inventor : 1)PROF. KUNAL GHOSH

(57) Abstract : A novel device for power control and storm security of Savonius wind turbine is proposed that is simple in use, inexpensive in construction, and extremely effective in turbine protection. The proposed built-in device provides automatic power control and storm security. The power control device consists of a window on each cup of the Savonius turbine and its spring-loaded shutter that opens centrifugally when a certain rpm is exceeded. The open shutter releases wind pressure and also offers aerodynamic braking, and thereby limits rpm and controls power. The open shutter also reduces wind thrust on turbine. This simple mechanism offers protection from centrifugal forces and wind thrust in the event of a powerful storm.

No. of Pages : 25 No. of Claims : 8

20999 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1226/DEL/2010 A

(19) INDIA (22) Date of filing of Application :28/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : AUTHENTICATION DEVICE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H04L (71)Name of Applicant : :NA 1)MOSER BAER INDIA LIMITED Address of Applicant :43B, OKHLA INDUSTRIAL ESTATE :NA :NA NEW DELHI-110020. INDIA :NA (72)Name of Inventor : :NA 1)VIJAY MALHI :NA :NA :NA :NA :NA

(57) Abstract : An authentication device is provided for enabling access to a network resource hosted on a remote server over a network. The authentication device enables access through an electronic device. The authentication device includes a Universal Serial Bus connector for connecting the authentication device to the electronic device and a printed circuit board. The printed circuit board includes an identity-unit configured to store an identity information associated with the authentication device, and a network circuitry operatively coupled to the identity-unit. The network circuitry is capable of transmitting the identity information to the remote server when a predefine condition is satisfied, such that, a substantial access to the network resource is allowed when the identity information is verified by the remote server. The identity-unit and the network circuitry are directly mounted on the printed circuit board in a Chipon-Board (CoB) construction.

No. of Pages : 28 No. of Claims : 13

21000 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10106/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :21/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : REGISTER MAPPING TECHNIQUES FOR EFFICIENT DYNAMIC BINARY TRANSLATION (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:G06F :12/815,023 :14/06/2010 :U.S.A. :PCT/US2011/040406 :14/06/2010 :NA :NA :NA

(71)Name of Applicant : 1)INTEL CORPORATION Address of Applicant :2200 MISSION COLLEGE BOULEVARD, MS: RNB-4-150, SANTA CLARA, CALIFORNIA 95052, U.S.A. (72)Name of Inventor : 1)OTTONI, GUILHERME D. 2)WANG, HONG 3)LI, WEI

:NA :NA

(57) Abstract : Generally, the present disclosure provides a system and method for mapping registers from a system with more registers to a system with fewer registers. Regions may be formed that include one or more blocks of code with relatively frequent register accesses. The most frequently accessed source registers may be mapped to target registers. Each block in the region may be bounded by a prologue and at least one epilogue. The prologue may be configured to implement register mapping and the epilogue(s) may be configured to manage program flow from a block in the region to another block in the region or to a block not in the region.

No. of Pages : 40 No. of Claims : 24

21001 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10160/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :22/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : REAL-TIME SPAM LOOK-UP SYSTEM

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : 1)MICROSOFT CORPORATION :G06Q 50/00 Address of Applicant :ONE MICROSOFT WAY, :12/493,046 REDMOND, WASHINGTON 98052-6399, U.S.A. :26/06/2009 (72)Name of Inventor : :U.S.A. 1)WALTER, JASON, D. :PCT/US2010/039190 2)GILLUM, ELIOT, C. :18/06/2010 3)VITALDEVARA, KRISHNA, C. :WO 2010/151493 4)COLVIN, RYAN, CHARLES 5)BIDGOLI, MEHRDAD :NA 6)MILLS, CHAD, W. :NA 7)KORB, JOSHUA, DAVID :NA 8)MCCANN, ROBERT, LEE :NA 9)HINES, DOUGLAS, JOHN 10)DAVIS, MALCOLM, HOLLIS 11)DRINIC, MILENKO

(57) Abstract : A system and method of managing unsolicited email sent to an email system over a network. Email messages are received at a message at an inbound mail transfer agent. A determination is made as to whether the email message is suspected to be an unsolicited suspect message. One or more queries for additional information on one or more characteristics of the message is initiated. Determinations are made based on replies to the queries before issuing a message accepted for delivery indication to a sending server.

No. of Pages : 26 No. of Claims : 15

21002 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10346/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :28/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD AND APPARATUS OF DERIVING SECURITY KEY (S) (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:G06F (71)Name of Applicant : :61/223,360 1)INTEL CORPORATION :06/07/2009 Address of Applicant :2200 MISSION COLLEGE :U.S.A. BOULEVARD, SANTA CLARA, CALIFORNIA 95052, U.S.A. :PCT/US2010/40731 (72)Name of Inventor : :01/07/2010 1)SHARAGA, AVISHAY :WO 2010/005644 2)YANG, XIANGYING :NA :NA :NA :NA

(57) Abstract : A method, apparatus and a wireless communication system to derive security key(s) over an air link in a secure manner by sending by a mobile station over the air a single direction permutation of a mobile station ID, establishing keys with the base station and sending the mobile station real ID in a secure manner.

No. of Pages : 22 No. of Claims : 33

21003 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.10347/DELNP/2011 A

(19) INDIA (22) Date of filing of Application :28/12/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : TECHNIQUES TO NEGOTIATE CAPABILITIES BETWEEN NETWORKED DEVICES (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H04W 28/18 (71)Name of Applicant : :61/275,266 1)INTEL CORPORATION :24/08/2009 Address of Applicant :2200 MISSION COLLEGE :U.S.A. BOULEVARD, SANTA CLARA, CALIFORNIA 95052, U.S.A. :PCT/US2010/046346 (72)Name of Inventor : :23/08/2010 1)AHMADI, SASSAN :WO 2010/028481 :NA :NA :NA :NA

(57) Abstract : Techniques for signaling capabilities of a mobile station using a capabilities index as well as a fall back mechanism in case of system failure. The capabilities index can represent multiple capabilities of the mobile station. A mobile station can signal to the base station the mobile stations capabilities using a capability index. A base station can interpret the capability index from the mobile station to learn the capabilities of the mobile station. The base station can signal to the mobile station the base stations supported capabilities using a capabilities index. The capabilities utilized between the base station and mobile station are set according to the base stations signaled capabilities.

No. of Pages : 17 No. of Claims : 25

21004 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1225/DEL/2010 A

(19) INDIA (22) Date of filing of Application :26/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : A COUNTERWEIGHT HOUSING FOR A VEHICLE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:B66C (71)Name of Applicant : :NA 1)CATERPILLAR INC. Address of Applicant :100 N.E. ADAMS STREET, PEORIA, :NA :NA STATE OF ILLINOIS 61629-6490, U.S.A. :NA (72)Name of Inventor : :NA 1)SUDHAKAR OBULISAMY :NA 2)VENKATESH BALASINGAM :NA 3)BHASKARAN VENKATARAMANI :NA :NA :NA

(57) Abstract : A counterweight housing system for a vehicle is disclosed. The counterweight housing for a vehicle comprises of a unitary panel having a plurality of bends cooperating to define a brace. The brace defines a plurality of chambers with at least one of the plurality of chambers configured to receive a counterweight material.

No. of Pages : 17 No. of Claims : 11

21005 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1239/DEL/2011 A

(19) INDIA (22) Date of filing of Application :27/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : HERBAL DRY COMPOSITION FOR CLEANING AND MOISTURIZING PURPOSE. (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61K (71)Name of Applicant : :NA 1)AMITY UNIVERSITY Address of Applicant :AMITY UNIVERSITY CAMPUS, :NA SECTOR 125, NOIDA-201303, U.P, INDIA . :NA (72)Name of Inventor : :NA :NA 1)DEVI DATT JOSHI :NA 2)PREETI PANTHARI :NA 3)RAJNI SINGH :NA :NA :NA

(57) Abstract : The present invention relates to an herbal composition for cleaning and moisturizing purpose. The composition comprises neem and apamarga. It effectively kills germs, prevents infection, cleanses and ensures total hygiene. The herbal dry composition is cost effective and biodegradable. It protects the skin and acts intensively against dryness. The herbal dry composition is 100 % pure in which no artificial preservative is added as the natural herbs of the present composition themselves act as preservatives.

No. of Pages : 14 No. of Claims : 8

21006 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1232/DEL/2011 A

(19) INDIA (22) Date of filing of Application :27/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : AUTO CHARGING SMART CELL PHONE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:F21L4/00 :NA :NA :NA :NA :NA :NA :NA :NA :NA :NA

(71)Name of Applicant : 1)DR. MOHD. RIZWAN KHAN Address of Applicant :ASSISTEANT PROFESSOR, DEPARTMENT OF ELECTRICAL ENGINEERING, ZAKIR HUSSAIN COLLEGE OF ENGG. & TECH., ALIGARH MUSLIM UNIVERSITY, ALIGARH(U.P)-202002 INDIA 2)DR. EKRAM KHAN (72)Name of Inventor : 1)DR. MOHD. RIZWAN KHAN 2)DR. EKRAM KHAN

(57) Abstract : The present invention relates to mobile/cell phones in general and more particularly, the present invention relates to charging of mobile/cell phones without electric supply/battery operated chargers. The present invention is about the development of charger free cellular phones. The basic concept is that there are number of Radio Frequency (RF) signals in the environment. Most importantly, in mobile context, the mobile tracking signal is almost available everywhere mobile network exist. When mobile is in idle state (not in talking state), even then it communicates with the nearest BTS through some RF signals to keep track of current location of the mobile set. The present invention (Cell Phone inbuilt Interface circuit) shall convert these RF signals into equivalent DC signal of requisite value, which shall be fed to the battery of cell phone to charge it. The RF signal strength is approximately of the order of 2mW. Each cell phone generally receives seven to eight RF signal of different strength for tracking purpose. In addition, there are plenty of RF signals (mostly around 900 MHz and 1800 MHz) available most of the time. The present invention is about utilization of these RF signals to charge batteries of mobiles and other handheld/portable electronic devices.

No. of Pages : 30 No. of Claims : 11

21007 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1242/DEL/2011 A

(19) INDIA (22) Date of filing of Application :27/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : PARKING SYSTEM FOR VEHICLE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :A61H :102010028342.8 1)ROBERT BOSCH GmbH Address of Applicant :POSTFACH 30 02 20, 70442 :29/04/2010 STUTTGART, GERMANY. :Denmark (72)Name of Inventor : :NA :NA 1)STAACK, JOCHEN :NA :NA :NA :NA :NA

(57) Abstract : The present subject matter relates to a parking system for a vehicle (1), comprising a sensor system having a plurality of sensors (2, 3, 4, 5) for measurement of distance data between the vehicle (1) and its surrounding, and comprising a processing unit, which determines a parking space (6) and parking space boundaries (7a, 7b, 7c), on the basis of the measured distance data. The processing unit further calculates a trajectory to be executed during parking process in the parking space (6). At least one of the sensors (4, 5) in intact condition is configured to determine at least one of the determined parking space boundaries (7a, 7c) during execution of the trajectory. Further, if the at least one of the sensors (4) during the execution of the trajectory fails to detect the least one of the determined parking space boundaries (7a, 7c) located in its detection space, the processing unit actuates a warning element to instruct a driver of the vehicle (1) for monitoring the roadway, and/or actuates a brake system that automatically stops the vehicle (1).

No. of Pages : 16 No. of Claims : 10

21008 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1243/DEL/2011 A

(19) INDIA (22) Date of filing of Application :27/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : INTERCHANGEABLE LENS, CAMERA BODY, AND CAMERA SYSTEM (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :G03C :2010/221297 1)NIKON CORPORATION Address of Applicant :12-1, YURAKUCHO 1-CHOME :30/09/2010 CHIYODA-KU TOKYO 100-8331 JAPAN. :Japan (72)Name of Inventor : :NA :NA 1)MAKIGAKI, TARO :NA :NA :NA :NA :NA

(57) Abstract : An interchangeable lens that can be fitted to and removed from a camera body, includes: an optical characteristic transmission unit that transmits to the camera body information relating to optical characteristics of the interchangeable lens, including at least information related to vignetting of the interchangeable lens. And with an image height corresponding to one sixth of an image height from a center of an approximately rectangular photographic field to any of four corners of the photographic field being termed Yl, the optical characteristic transmission unit transmits, as the information related to vignetting of the interchangeable lens, information specifying vignetting at positions for which image heights from the center are integral multiples of Y1 from 2 through 6 inclusive.

No. of Pages : 42 No. of Claims : 11

21009 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1251/DEL/2011 A

(19) INDIA (22) Date of filing of Application :28/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : METHOD FOR DETERMINING A TWIST STRUCTURE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :C07D :10 2010 1)HOMMEL-ETAMIC GMBH Address of Applicant :ALTE TUTTLINGER STRASSE 20, 018 820.478056 VILLINGEN-SCHWENNINGEN, GERMANY. 52 :29/04/2010 (72)Name of Inventor : :Germany 1)JORG SEEWIG :NA :NA :NA :NA :NA :NA :NA

(57) Abstract : In a method according to the invention for determining a twist structure in the surface roughness of a workpiece which is cylindrical at least in part, multiple sampling segments which extend in the axial direction of the workpiece and which are mutually interspaced in the circumferential direction are carried out in a surface region of interest on the workpiece, and the value of at least one parameter of the twist structure is determined based on the measured values obtained using the sampling segments. According to the invention, an estimated value of at least one parameter of the twist structure is determined based on the measured values associated with a first sampling segment, the estimated value being corrected based on the measured values associated with at least one second sampling segment.

No. of Pages : 14 No. of Claims : 5

21010 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1230/DEL/2010 A

(19) INDIA (22) Date of filing of Application :28/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : SYSTEM AND METHOD FOR CONTINUATION OF A WEB SESSION (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H04L (71)Name of Applicant : :NA 1)UNISYS CORPORATION Address of Applicant :801 LAKEVIEW DRIVE, SUITE 100, :NA :NA BLUE BELL, PA 19422, U.S.A. :NA (72)Name of Inventor : :NA 1)SATEESH MANDRE :NA :NA :NA :NA :NA

(57) Abstract : A computer-implemented method (500), executed on a web server, for facilitating continuation of a web session after the web session has been terminated. The method (500) includes initiating a web session having an associated web page with a URL upon receiving a request from a web browser (502). During the web session, the method (500) includes generating session information, including a transaction identifier and state information (508). The generated session information is then transmitted to a web browser (510) followed by termination of the web session (513). After the termination, the web session is resumed by the web server (514) by accepting the session information from the web browser (518), authenticating the transaction identifier (520), and validating the client data (530) corresponding to the authenticated transaction identifier. After validation, the web session may be continued at the web page (542).

No. of Pages : 38 No. of Claims : 26

21011 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1231/DEL/2010 A

(19) INDIA (22) Date of filing of Application :28/05/2010

(43) Publication Date : 09/11/2012

(54) Title of the invention : RADIOLABELED METHODS AND USES THEREOF

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : 1)GE HEALTHCARE LIMITED Address of Applicant :AMERSHAM PLACE, LITTLE, :C07B CHALFONT, BUCKINGHAMSHIRE HP7 9NA, GREAT :NA BRITAIN U.K. :NA (72)Name of Inventor : :NA 1)IAN NEWINGTON :NA 2)DUNCAN WYNN :NA 3)HELEN BETTS :NA 4)R. JAMES NAIRNE :NA 5)REBECCA DAVIS :NA 6)BENEDICTE GUILBERT :NA 7)SUBRATA MANDAL :NA 8)JINTO JOSE 9)SUNDERARAMAN VARADARAJAN 10)CHITRALEKHA RANGASWAMY

(57) Abstract : The present invention relates to radiodiagnostic methods and methods of use thereof as imaging agents for preferably a HA serotonin 5-HT1A receptor for use in PET or SPECT, preferably PET. Compositions comprising an imaging-effective amount of radiolabeled compounds are also disclosed.

No. of Pages : 161 No. of Claims : 10

21012 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1241/DEL/2011 A

(19) INDIA (22) Date of filing of Application :27/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : A NOVEL BASE MATERIAL FOR COMMERCIAL PRODUCTION OF FUNGAL BIOPESTICIDE AND BIOFERTILISER (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A01J (71)Name of Applicant : :NA 1)AMITY UNIVERSITY Address of Applicant :AMITY UNIVERSITY CAMPUS, :NA :NA SECTOR-125-NOIDA-201303, UP. INDIA :NA (72)Name of Inventor : :NA 1)DR. P. BATTACHARYYA :NA :NA :NA :NA :NA

(57) Abstract : The present invention provides a base material comprising Sal seeds for commercial production of fungus for use in biopesticide & biofertiliser. Sal seeds with some support of glucose and yeast extract can contain high population of Trichoderma viride/ Plutorus sajorcaju may be used as substrate in commercial production.

No. of Pages : 9 No. of Claims : 8

21013 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1265/DEL/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : CNG REFUELLING CAP INTERLOCK S NSOR (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:B23B :NA :NA :NA :NA :NA : NA :NA :NA :NA :NA

(71)Name of Applicant : 1)MINDA INDUSTRIES LIMITED Address of Applicant :Village Nawada Fatehpur P.O. Sikanderpur Badda Manesar Distt. Gurgaon Haryana 122004 India (72)Name of Inventor : 1)UDAY VISHWASRAO WASULE 2)AMIT VIKAS SHAH

(57) Abstract : There is disclosed a non-contact magnetic type CNG interlock sensor which provides ignition lock in a vehicle running on duel fuel one of them primarily a CNG vehicle. The special magnetic circuit has been designed and insert moulded inside the CNG refuelling cap in a unique configuration.

No. of Pages : 17 No. of Claims : 12

21014 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1266/DEL/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011 (54) Title of the invention : OUTER

(43) Publication Date : 09/11/2012

EAR-VIEW MIRROR ASSEMBLY

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Fili g Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:G01T :NA :NA :NA :NA :NA : NA :NA :NA :NA :NA

(71)Name of Applicant : 1)MINDA INDUSTRIES LIMITED Address of Applicant :Village Nawada Fatehpur P.O. Sikanderpur Badda Manesar Distt. Gurgaon Haryana 122004 India (72)Name of Inventor : 1)VINOD KUMAR SHARMA 2)MANOJ KUMAR JINDAL 3)NAVAL KISHORE NARANG 4)VEER ABHADRAYYA.K.

(57) Abstract : The present invention provides an improved fold-unfold mechanism for outer rear-view mirror assembly (1) of vehicle. The assembly includes a frame (2), a mounting-pivot (3), an actuator (3), a spring (18) and locking washer (20). A steel washer (19) is disposed between the locking washer (20) and the spring (18) so as to avoid contact between the spring (18) and the locking washer (20) thereby reducing friction between the two components. The fold-unfold mechanism of the present invention is cost effective and has long endurance life.

No. of Pages : 24 No. of Claims : 20

21015 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1267/DEL/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : A CONTROL SYSTEM AND METHOD FOR UNINTERRUPTIBLE POWER SUPPLIES OF DC-AC OR AC-DC CONVERTER/INVERTER OR SOLAR-GRID HYBRID CONVERTER/INVERTER OR ANY OTHER POWER CONVERTER OR POWER BACKUP SYSTEM. (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:H01J (71)Name of Applicant : :NA 1)SU-KAM POWER SYSTEMS LTD., Address of Applicant :306, KIRTI DEEP BUILDING, :NA :NA NANGAL RAYA, NEW DELHI-110046, India :NA (72)Name of Inventor : :NA 1)KUNWER SACHDEV :NA 2)SANJEEV KUMAR SAINI :NA :NA :NA :NA

(57) Abstract : The present invention relates to a control module for power backup system. It provides a control module having a compact and versatile controller for power backup/ power supply/ converter applications. The module includes analog and digital programmable control with signal conditioning and processing circuitry in a single module. The controller provides excellent control, monitoring or entire operation of the system.

No. of Pages : 16 No. of Claims : 10

21016 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1249/DEL/2011 A

(19) INDIA (22) Date of filing of Application :28/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : AN IMPROVED PROCESS FOR THE PREPARATION OF NANO SILVER-COATED CERAMIC CANDLE FILTERS

(51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:C07C :NA :NA :NA :NA :NA :NA :NA :NA :NA :NA

(71)Name of Applicant : 1)INTERNATIONAL ADVANCED RESEARCH CENTRE FOR POWDER METALLURGY AND NEW MATERIALS (ARCI), DEPARTMENT OF SCIENCE AND TECHNOLOGY, GOVT. OF INDIA Address of Applicant :PLOT NO. 102, SECTOR - 44, INSTITUTIONAL AREA, GURGAON, HARYANA - 122003 India (72)Name of Inventor : 1)JANARDHANAN REVATHI 2)KARUPPIAH MURUGAN 3)TATA NARASINGA RAO

(57) Abstract : The present invention relates to an improved environmental friendly process for the preparation of nano silver-coated ceramic candle filters. The antibacterial properties of the nano silver coated ceramic filter candles of the present invention when investigated before and after filteration, it is observed to reduce the bacterial count from 105 cfu/ml to 0 cfu/ml that meets the Indian Standards IS 7402. The amount of silver released in filtered water was observed to be minimal which revealed the strong adhesion of nano silver particles on to the ceramic filter candle. In the process of the present invention environmental friendly chemicals are used.

No. of Pages : 18 No. of Claims : 3

21017 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1261/DEL/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : THREAD FINGER FOR A THREAD-CHANGING DEVICE (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:B23B :10 2010 019 032.2 :03/05/2010 :Germany :NA :NA :NA :NA :NA :NA :NA

(71)Name of Applicant : 1)SIPRA PATENTENTWICKLUNGS-UND BETEILIGUNGSGESELLSCHAFTMBH Address of Applicant :EMIL-MAYER-STRASSE 10-72461 ALBSTADT, GERMANY. (72)Name of Inventor : 1)HANS KONIG 2)BERND BOSS

(57) Abstract : A thread finger (10) for a thread-changing device of a knitting machine, having a finger body (11) in which a guide element (19), which jointly moves a cutting knife (22) and a clamping element (24) for the knitting thread, is mounted longitudinally displaceably.

No. of Pages : 16 No. of Claims : 15

21018 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1263/DEL/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : ENDONASAL FILTER MODIFIED TO SUSTAIN SIMULATED STUD PIERCING (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :B23B :MI2011A000652 1)TALMON, EMILIO Address of Applicant :VIA PAREDA, 52 38032 CANAZEI :18/04/2011 (TN) ITALY :Italy (72)Name of Inventor : :NA :NA 1)TALMON, EMILIO :NA :NA :NA :NA :NA

(57) Abstract : A miniaturized filter comprises two planar endonasal filtering elements glued to the oval endings of a flexible threadlike support of plastic material curved to form a U acting like a spring across the cartilage of the nasal septum. An ellipsoidal element, hanging from the U, contains a central hole into which a brilliant or a pearl can be pressed. The pendant may be of any desired form, for example discoid, or a stud with the brilliant mounted on its end. Connection between the pendant and the U-shaped flexible connecting element can be realized in different ways: one by having both from the same casting; another by integrating two flexible curved pieces in the pendant for an elastic tightening of the threadlike support; a third being to have a separate connecting element provided with a first pair of curved elastic elements to be fixed by pressure to the cylindrical body of the U-shaped element and with a second pair of elastic elements similar to spherical lunes to be pressed onto a substantially ellipsoidal pendant. (Figure 4)

No. of Pages : 16 No. of Claims : 5

21019 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1264/DEL/2011 A

(19) INDIA (22) Date of filing of Application :29/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : TURBOEXPANDER FOR POWER GENERATION SYSTEMS (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :B23B :CO2010A000026 1)NUOVO PIGNONE S.P.A. Address of Applicant :VIA FELICE MATTEUCCI, 2,50127 :14/05/2010 FLORENCE, ITALY :Italy (72)Name of Inventor : :NA :NA 1)LANDI GIACOMO :NA 2)DEL GRECO ALBERTO SCOTTI :NA 3)PALOMBA SERGIO :NA 4)MARIOTTI GABRIELE :NA :NA

(57) Abstract : Systems include using a turboexpander in power generation systems. The system includes: a turboexpander to include an expander section, a pump section and a motor-generator section which are mechanically linked via a shaft. The expander section is fluidly connected to an outlet side of a heat exchanger and configured to receive a vapor stream of a fluid, to rotate the shaft and to generate an expanded vapor stream of the fluid. The pump section is fluidly connected to an outlet side of a condenser and configured to receive a liquid stream of the fluid, to pressurize the liquid stream of the fluid and to circulate the fluid in the power generation system. The motor-generator section is configured to output an electrical current.

No. of Pages : 23 No. of Claims : 12

21020 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1274/DEL/2011 A

(19) INDIA (22) Date of filing of Application :02/05/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : PHARMACEUTICAL FORMULATION COMPRISING ORNIDAZOLE AND RACECADOYRIL FOR THE TREATMENT OF DIARRHOEA CAUSED DUE TO BACTRIAL AND PROTOZOAL INFECTIONS (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

:A61K (71)Name of Applicant : :NA 1)AKUMS DRUGS & PHARMACEUTICALS LIMITED Address of Applicant :304, MOHAN PLACE, LSC, BLOCK:NA C, SARASWATI VIHAR, DELHI-34 :NA (72)Name of Inventor : :NA :NA 1)MR. SANJEEV JAIN :NA :NA :NA :NA :NA

(57) Abstract : A pharmaceutical formulation comprising Ornidazole or its pharmaceutically acceptable salt, present in the range 150 mg to 500 mg, preferably 500mg, and racecadotril or its pharmaceutically acceptable salt, present in the range 75 mg to 250 mg, more preferably 100 mg, useful for managing diarrhoea due to bacterial infections.

No. of Pages : 12 No. of Claims : 9

21021 The Patent Office Journal 09/11/2012

(12) PATENT APPLICATION PUBLICATION

(21) Application No.1245/DEL/2011 A

(19) INDIA (22) Date of filing of Application :27/04/2011

(43) Publication Date : 09/11/2012

(54) Title of the invention : MEDICAL CONFERENCING SYSTEMS AND METHODS (51) International classification (31) Priority Document No (32) Priority Date (33) Name of priority country (86) International Application No Filing Date (87) International Publication No (61) Patent of Addition to Application Number Filing Date (62) Divisional to Application Number Filing Date

(71)Name of Applicant : :G09F :12/778,794 1)GENERAL ELECTRIC COMPANY Address of Applicant :1 RIVER ROAD, SCHENECTADY, :12/05/2010 NEW YORK 12345 U.S.A. :U.S.A. (72)Name of Inventor : :NA :NA 1)VENON MEDHI :NA 2)NACHTIGALL NEAL :NA :NA :NA :NA

(57) Abstract : A contactless power transfer system is proposed. The power transfer system comprises a field-focusing element comprising a dielectric material. The dielectric material comprises a composition that is selected from the family of (Ba,Sr)TiO3 or CaCu3Ti4O12The compositions of the (Ba, Sr)TiO3 include the materials such as Ca1-x_yBaxSryTi1_zCrzO3-8Np, wherein 0