factory installed console shifter when the Powerglide transmission is replaced ....
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO. #C351. #C401.
Shiftworks ® products are made in the USA
NEW PRODUCTS
Neutral Safety & Back-up Switch Re-Location Conversion 3-speed and 4-speed Automatics 1969-81 Pontiacs and 1973-81 Chevy’s Does your shifter look like this? GM used a rod linkage from the transmission to operate the neutral safety and back-up switch located on the column for many of its center console equipped cars. Headers and OverDrives and many owners have in many cases lost or caused to be lost this valuable safety item. We know, we got the calls. So finally here is a solution. You can now put it on the shifter where it belongs.
For all TH350 and TH400 #SW652 $49.50
Use Column switch for 1968 Firebird. Switch not included.
For all OverDrive applications using SHIFTWORKS® shifter conversion #SW653 $94.50 Switch IS included.
2
www.shiftworks.com
PowerGlide Range Select & Kickdown Shaft
The Powerglide transmission uses several different range (gear) select shafts. Most are specific to the application and because the levers are usually welded onto the shaft, not easily changed. We have now replicated the 68 and up shaft design, including the kickdown shaft which is unique among aftermarket suppliers.
649-120
649-161
649-1500
#649-120
Range Select and Kickdown Shafts
#649-161
Rod Linkage Lever
$19.50
#649-1500
Cable Linkage
$19.50
$125.00
4L60E, 4L65E, 4L70E & 4L80E
Our 4LX fix-it kits resolve rod linkage conflicts with the electric neutral safety/backup light switch located on the exterior of the transmission and for cable applications straighten out the cable alignment if the transmission has the long Range-Select lever.
4LE Rod Linkage fix-it 4LE-C Cable fix-it kit
Use with the non-E overdrive conversion for your car.
4LE Rod Linkage fix-it
$18.50 $18.50
4LE-C Cable fix-it kit
www.shiftworks.com
3
1964-67 CHEVELLE
Powerglide Shifter Conversion Kit
The purpose of this kit is to allow the use of the 1964-67 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it our cable #K100. Kit includes cable.
1964-65 CHEVELLE #SC2031-C TH350, TH400 #SC2041-C TH700-R4, TH200-4R, or 4L60 As Installed
$175.00 $175.00
1966-67 CHEVELLE
#SC2031-C
#SC2032-C TH350, TH400 #SC2042-C TH700-R4, TH200-4R, or 4L60
$175.00 $175.00
1964-67 CHEVELLE #S500*
1965-67 Backup and Safety Switch
$52.50
*Recommended for all conversions.
As Installed
#SC2042-C
#S502
1966-67 Console Lens Bezel
#4160 #S501 #S530 #S531
Button Button Spring TH350 Kickdown Cable TH350 Kickdown Bracket (Small Block)
$75.00 $14.50 $4.50 $44.50 $14.50
1964-67 POWERGLIDE PARTS #S502
4
#S500
www.shiftworks.com
#SW421 #SW419
Rod Linkage Trans. Select Lever
$41.00 $42.00
1964 IMPALA
Powerglide Shifter Conversion Kit
The purpose of this kit is to allow the use of the 1964 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable.
1964 IMPALA #SC2051-C TH350, TH400 #SC2061-C TH700-R4, TH200-4R, or 4L60 #S500* Back-Up & Safety Switch
$175.00 $175.00 $52.50
*Recommended for all conversions.
#S530 TH350 Kickdown Cable $44.50 #S531 Kickdown Bracket (Small Block) $14.50 #4160 Button $14.50 #S501 Button Spring $4.50
#SC2051-C
#S500
#SC2061-C
#S530
#S531
#S501
#4160
www.shiftworks.com
5
1965-67 NOVA & IMPALA Powerglide Shifter Conversion Kit
Use your factory-installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200 4R, or 4L60) transmission. This kit retains the rod linkage.
#S1031
As Installed
1965-67 NOVA #S1031 TH350, TH400 #S1041 TH700-R4, TH200-4R, or 4L60 #4160 Shifter Release Button #S501 Release/Spring Button
$59.50 $59.50 $14.50 $4.50
1965 IMPALA #S1042
As Installed
#S103 TH350, TH400 #2441 3-Speed Lens #S1043 TH700-R4, TH200-4R, or 4L60
$49.00 $56.50
#S103 TH350, TH400 #2592 3-Speed Lens #S1042 TH700-R4, TH200-4R, or 4L60
$49.00 $44.50
1966-67 IMPALA
$59.50
$59.50
1965-67 NEUTRAL SAFETY AND BACK-UP SWITCH #2441
#2592
#S500*
Rod Linkage #SW423 #SW425 #SW427 #SW431 #SW404
*Recommended for all conversions.
65-67 Impala PG & TH350 65-67 Impala TH400 65-67 Nova 65-67 Nova (O.D.) Swivel Kit #SW425 pictured
6
www.shiftworks.com
$52.50 $42.00 $58.00 $41.00 $41.00 $10.00
1967 CAMARO & FIREBIRD, 1968-72 NOVA Shifter Conversion Kit
The purpose of this kit is to allow the use of the factory installed automatic floor shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4 or TH200-4R) transmission. This kit retains the rod linkage. #S105A #S105B #SW429 #SW404 #S530 #S531 #6724 #S501 #S504 #S636 #S635 #SW442 #SW443 #SW441 #SW435 #S519
#S635
TH350, TH400 TH200-4R, TH700-R4, 4L60 67 Rod Linkage with swivel Swivel Kit TH350 Kickdown Cable Kickdown Bracket (Small Block) Shifter Release Button Release Button Spring Plastic (Delrin) Bushings Flexi-Rod (inside handle) NSS & Back-up Light Lever Bottom Spring Bottom Spring (cotter pin style) Main Shaft Washers 1968-72 Nova TH Rod Linkage Neutral Safety/Back-up Switch
$59.50 $59.50 $41.00 $10.00 $44.50 $14.50 $14.50 $4.50 $15.25 $54.50 $15.25 $4.50 $4.50 $6.50 $63.50 $38.50
#S504
#S105A
#S519
#SW435
#S636
www.shiftworks.com
7
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO 3-Speed Installations
All 1968-72 factory “Horseshoe” style shifters have a universal detent for both 2-speed and 3-speed automatic transmissions. They also use the same cable. However, these models do require a cable installation kit when swapping out a Powerglide transmission for a TH350 or TH400, or when installing a factory console shifter in car originally equipped as a column shift.
NEW!! 3-Speed Detent Good for replacing a worn or damaged unit and for Reverse Valve Bodies too. #S640 #S150 #S151 #S152 #C351
#S640
3-Speed Detent 68-69 Camaro RVB Lens 68-70 Chevelle RVB Lens 71-72 Chevelle RVB Lens
$30.00 $19.50 $19.50 $19.50
1968-72 CAMARO, CHEVELLE, IMPALA, & MONTE CARLO Universal Kit
#C351
(All Models) TH350, TH400
$37.50
1968 CHEVELLE,1968-69 CAMARO #C401
#C401 TH400 GM Factory Parts #C354 TH350
$45.00 $42.50
1969-72 CHEVELLE, 1970-72 CAMARO, 1968-72 IMPALA
#C3511
#C3511 TH350, TH400 #C402 TH400 GM Factory Parts #4582 1968-70 3-speed Lens #4584 1971-72 3-speed Lens #S530 TH350 Kickdown Cable #S531 TH350 Kickdown Bracket
(Small Block)
See Cables 8
www.shiftworks.com
$42.50 $45.00 $19.50 $19.50 $44.50 $14.50
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO 3-Speed Ratchet Shift Detent
A new Thomson Performance product. This detent will enable positive shifts from low to drive. #DT3 Powerglide, TH350, TH400 $75.00 #DT4* GM Overdrives $75.00
#DT3
#DT4
DT4 MUST be used with a SHIFTWORKS® overdrive conversion kit series SC224X.
4-Speed Overdrive Kit 1968-69 CAMARO #SC2244 TH700-R4, TH200-4R, 4L60
#SC2244
$92.50
1970-72 CAMARO #SC2245 TH700-R4, TH200-4R, 4L60
$92.50
1968-72 IMPALA (No Lens) #SC2240 TH700-R4, TH200-4R, 4L60
68-69
$81.25
70-72 As Installed – Camaro
1968 CHEVELLE #SC2241 TH700-R4, TH200-4R, 4L60
$92.50
1969-70 CHEVELLE #SC2242 TH700-R4, TH200-4R, 4L60
$92.50
#SC2243
1971-72 CHEVELLE #SC2243 TH700-R4, TH200-4R, 4L60
$92.50
CABLES
#C100
#C100 Shifter Cable (GM #3956765) #K100 Shifter Cable #S532 Retainer
$97.75 $74.50 $5.50
(clips cable to shifter handle)
See our video on cables:
www.shiftworks.com/video/cable.htm
RVB Lens #S151
#K100
www.shiftworks.com
9
1968-1969 FIREBIRD & GTO 3-Speed Installations
T he 1968-69 Firebird Powerglide (2-speed) shifter can be used with the TH350 or TH400 (3-speed) transmission without modification. The only difference in the factory shifter detent is an additional hard stop for 2nd gear, not present with the 2-speed detent. This stop is unnecessary.
#C352 #C353 #C101 #K100 #C352
1968-69 Firebird TH350 $37.75 1968-69 Firebird TH400 $37.75 Shifter Cable (GM #498467) $114.75 Shifter Cable $74.50
Note: See page 2 for Neutral Safety/Backup Switch
1968-81 FIREBIRD, GTO, & LE MANS, 1973-81 CAMARO 4-Speed Overdrive Kit
The purpose of this kit is to allow the use of the factory installed shifter when installing a newer overdrive transmission. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original cable.
1973-78 CAMARO #SC2261 TH700-R4, TH200-4R, or 4L60
$92.50
1968 FIREBIRD #2262-8 TH700-R4, TH200-4R, or 4L60
#SC2262
$92.50
1979-81 CAMARO, 1969-81 FIREBIRD, 1968-75 GTO & LE MANS #SC2262 TH700-R4, TH200-4R, or 4L60
As Installed
10
As Installed 73-78 Camaro
www.shiftworks.com
#C101 #K100
Shifter Cable (GM #498467) Shifter Cable
$92.50 $114.75 $74.50
Note: See page 2 for Neutral Safety/Backup Switch
1965-67 CORVETTE Shifter Conversion Kit
The purpose of this kit is to allow the use of the factory installed automatic shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60, or TH200-4R) transmission. The kit retains the rod linkage. $97.25
#SC2405 1965-67
A new laser cut, die stamped aluminum console insert with black anodized letters for the above kit. #S141 #S142
Console Insert (TH350/400) Console Insert (Overdrive)
$44.50 $44.50
Note: New shifters available. See page 22.
#S141
#S142
#SC2405
1968-81 CORVETTE Shifter Conversion Kit
This kit enables the use of the factory installed shifter when installing a newer overdrive transmission, such as the TH200-4R, TH700-R4, and the 4L60. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original cable. Also included is an overdrive console lens adapter. #SC2401 1968-71 $97.25 #SC2402 1972-76 $97.25 #SC2403 1977-81 $97.25
Lens Indicator Adapters L to R: 68-71, 72-76, 77-81
GM Cables #C103 1968-76 $90.00 #C102 1977-81 $120.00 #K103 1968-81 $78.50
www.shiftworks.com
11
1964-65 GTO & LE MANS Use your factory-installed 2-speed shifter to retain the original appearance when replacing the Powerglide transmission with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH2004R, or 4L60) transmission. This kit eliminates the rod linkage and replaces it with a cable. Kits include new cable. #SC2152 TH350 & TH400 #SC2162 TH700-R4, TH200-4R or 4L60
$175.00 $175.00
As Installed #SC2152
1966-67 GTO & LE MANS This kit allows the use of the factory 2-speed shifter when converting to a fully functional 3-speed shifter with installation of a new TH350, TH400, TH200-4R, TH700-R4, or 4L60 transmission. Kits include our cable #K100. #SC2101-C TH350 & TH400
$175.00
#SC2121-C TH700-R4, TH200-4R, or 4L60
$175.00
#K100
#SC2101-C
12
www.shiftworks.com
Shifter Cable
$74.50
DUAL GATE SHIFTERS Use the original His & Hers Shifter with a new 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. Kits include all necessary hardware for installation.
1967-68 GTO #C362 TH400 #C363 TH350 #C361 TH700-R4, TH200-4R, or 4L60 #K100 Shifter Cable
$37.50 $37.50 $45.00 $74.50
1970-72 442 #C371 TH700-R4, TH200-R4, or 4L60 $110.00 (includes cable) #C361
The overdrive conversion puts overdrive in a neutral position. Low, second, and drive are normally located.
442
#C371
www.shiftworks.com
13
1967-72 CUTLASS Shifter Conversion Kit
Use your factory-installed automatic floor shifter with a newer 3-speed (TH350 or TH400) or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission.
1967-69 CUTLASS #SC2302 TH350 & TH400
$150.00
1967-72 CUTLASS #SC2312 TH700-R4, TH200-4R, or 4L60
#SC2312
$150.00
#SC2302
1964-66 CUTLASS Shifter Conversion Kit
The purpose of this kit is to allow the use of the factory shifter and console when the 2-speed transmission is replaced with a TH350 or TH400 3-speed or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the Rod Linkage and replaces it with a cable.
1965-66 CUTLASS #SC2320 TH350 & TH400 #SC2322 TH700-R4, TH200-4R or 4L60 #SC2322
14
www.shiftworks.com
$135.00 $135.00
1968-72 BUICK 4-Speed Overdrive Kit
Use your factory-installed automatic floor shifter with a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, console lens indicator (68-69 only), new cable, all necessary hardware, and instructions.
1968-72 BUICK #SC2072 TH700-R4, TH200-4R, or 4L60 $150.00 As Installed (’68-’69)
#SC2072
1964-66 BUICK 4-Speed Overdrive Kit
Use your factory-installed automatic floor shifter with a newer 3-speed (TH350, TH400) or 4-speed (TH700-R-4, TH200-4R or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, new cable, all necessary hardware, and instructions. #SC2082 TH350, TH400 $150.00 #SC2092 TH200-4R, TH700-R4 or 4L60 $150.00
#SC2322
#SC2082
#SC2092
www.shiftworks.com
15
COLUMN SHIFT CONVERSIONS Transmission Shift Arm Connection Kit For column shifters TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L80.
The Kugel Komponents Kit connects the column or floor shifter to most GM transmissions. It also allows for gear pointer alignment. A splined adapter button allows the arm to be positioned at any angle. A slot positions to pivot joint for longer or shorter sweep and pointer alignment. The rod assembly is 17” – 23 1/2” pivot to pivot. #KK02
Column Shift Linkage
$45.00
#KK02
Do you have a: 4L60E, 4L70E, or 4L80E with the neutral safety switch on the outside? Then you will need out 4LE Fix it kit. This allows you to connect the linkage and not have any conflicts with the switch. #4LE Kit
#4LE KIT
16
www.shiftworks.com
$18.50
COLUMN SHIFT CONVERSIONS Column Lens Indicators
1962-65 NOVA, 1961-64 IMPALA, 1964-65 CHEVELLE & GTO/TEMPEST
#S138 & S139
#S138 #S139
Indicator (TH) Indicator (OD)
$19.50 $19.50
1967 NOVA & 1967-68 CAMARO #S143 #S144
#S143 & S144
Indicator (TH) Indicator (OD)
$19.50 $19.50
1966 NOVA #S153 #S154
Indicator TH Indicator OD
#S153
$19.50 $19.50
#S154
1968-74 NOVA #S155 #S156
Indicator TH Indicator OD
$19.50 $19.50 #S153 AS INSTALLED
#S155 #S156
1968 & 1969 CHEVELLE
#S145 #S146 #S147 #S148
These cleverly designed adaptors fit over the existing raised letter indicators for a permanent and factory appearing solution at an affordable cost. 68 Chevelle TH 3-speed $19.50 68 Chevelle OD 4-speed $19.50 69 Chevelle TH 3-speed $19.50 69 Chevelle OD 4-speed $19.50
1966-67 CHEVELLE (use with clear floor shift lens) #S158
Indicator OD 4-speed
#S146 AS INSTALLED
#S158 66-67 Chevelle Indicator
$19.50
1970-1972 MALIBU SWEEP DASH #S157
Indicator OD 4-speed
$19.50 www.shiftworks.com
17
1966-67 CHEVELLE & NOVA SS GAUGE CONVERSIONS
Super Sport Gauge Conversion
This new SHIFTWORKS® conversion kit will allow anyone with the standard Chevelle or Nova in-dash gauges to convert to the Super Sport style gauge package. #S505
Use the voltmeter with one-wire alternators and non-GM wiring.
These gauges are designed to fit into the EXISTING openings in the back of the dash. They include the Temperature sensing device and the mechanical Oil Pressure line and fittings. An ammeter is standard, as was used by GM.
1966-67 CHEVELLE #S505 SS Gauges Kit with Ammeter $215.00 #S505-V SS Gauges Kit with Voltmeter $215.00 #S505-ADP Adaptors For Shiftworks® Gauges In Factory SS Dash $25.00
1966-67 NOVA #S507-V
SS Gauges Kit with Voltmeter $215.00
HIGH OIL PRESSURE?
#S507-V
18
www.shiftworks.com
Midrange for the HOP series is 60 pounds, versus the normal 30 pounds oil pressure gauge. The upper scale of the HOP series oil pressure gauge is 100+ pounds. #S505-HOP $215.00 #S505-VHOP $215.00 #S507-HOP $215.00
CHEVELLE IN-DASH TACHOMETER CONVERSIONS In-Dash Tachometer
SHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock. All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look. #S510-1 Installed
1964-65 CHEVELLE #S510-1
1964-65 Chevelle In-Dash Tachometer
$146.25
1968 CHEVELLE #S512
1968 Chevelle In-Dash Tachometer
$146.25
#S510-1
#S512 #S512 Installed
1968 CHEVELLE IN-DASH TACHOMETER AND GAUGES #S508-VT Gauges Conversion with Tachometer Replaces Idiot Lights
Before
$325.00
After
www.shiftworks.com
19
CHEVELLE IN-DASH TACHOMETER CONVERSIONS
In-Dash Tachometer
SHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock.
#S513 Installed
All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look.
1969 CHEVELLE #S513
#S514 Installed
#S513
1969 Chevelle In-Dash Tachometer
$141.25
1970-72 CHEVELLE SS #S514-G #S514-W
1970 Chevelle In-Dash Tachometer 1971-72 Chevelle In-Dash Tachometer
$141.25 $141.25
1970-72 CHEVELLE MALIBU #S514-W
#S518 Installed
20
www.shiftworks.com
#S518-G #S518-W
1970 Malibu In-Dash Tachometer 1971-72 Malibu In-Dash Tachometer
$141.25 $141.25
#S518-G
NOVA IN-DASH TACHOMETER CONVERSIONS
#S515 Installed
1963-65 NOVA #S515
1963-65 Nova In-Dash Tachometer
$146.25
1968-72 NOVA #S517-G #S517-W
1968-70 Nova In-Dash Tachometer 1971-72 Nova In-Dash Tachometer
$141.25 $141.25
#S515
#S517 Installed
#S517
www.shiftworks.com
21
TRANS-STORMER TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80 Trans-Stormer
The Trans-stormer shifter is a universal design suitable for many applications and specific to none. It is available as either a rod linkage or cable shifter, with a full neutral safety/back-up light switch, and with several knob and handle options. Same shifter for all TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80.
1963-64 NOVA & 1963 IMPALA Installed in early Nova/Impala console.
SW230-R22 10 inch w/white knob SW230-R23 10 inch w/black knob
$285.00 $285.00
1964 & EARLIER CORVETTE Complete with Neutral Safety/Back-Up light switch, mounting system, and rod linkage connection kit. Smoothie Knob SW230-R24 6 inch & 1/2 inch diameter w/white knob $285.00 SW230-R23 6 inch & 1/2 inch diameter w/black knob $285.00 SW230-R22
1965-67 CORVETTE Complete with Neutral Safety/Back-Up light switch, mounting system, and rod linkage connection kit. Button Top Knob New body coming to replicate Original PowerGlide Shifter $350.00 SW280-R05 1965-67 6 inch $275.00
SW230-R23
1965-67 CORVETTE CONSOLE INSERTS S141 S142
S141
SW280-R05
22
www.shiftworks.com
TH- 3 speed OD- 4 speed
$44.50 $44.50
S142
PowerGlide Shifter
All Trans-Stormer Shifters can now be ordered for the PowerGlide. Simply add a P to the part number prefix. For example, the SW230-R22 becomes a SW230P-R22. Price is the same. However, some PowerGlide transmissions may require an additional Range Selector Shaft and Lever available seperately. Both cable and rod linkage versions available.
PowerGlide Rod Linkage
649-120 649-161 649-1500
Range Select Shaft Rod Linkage Cable Linkage
PowerGlide Cable Linkage
$125.00 $19.50 $45.00
Range select shaft and kickdown shaft must be installed into the transmission. Cables sold seperately. (See new products.)
1967 CAMARO & FIREBIRD & 1968-72 NOVA Shifter for PowerGlide
Complete with rod linkage, optional off sets and Neutral safety/backup light switch. Uses pre-existing PG range select lever at transmission. Shiftworks will be offering parts to connect to any PowerGlide. SW280P-RCT $325.00 649-120 $125.00 649-161 $19.50
www.shiftworks.com
23
Shifter for all Turbohydramatics TH3650, TH400, TH200-4R, TH700-R4, 4L60, 4L80
1967 CAMARO & FIREBIRD, 1968-72 NOVA Complete with all linkage, optional off sets, mounting system, and Neutral safety/ backup light switch. SW280-RCT $350.00
1964-67 CHEVELLE & IMPALA, 1965-67 NOVA
SW280-CT7
7 inch T-Handle Shifter w/cable
$350.00
New Shifter is complete witih all cable linkage, shiftworks cable, neutral safety switch, and T-handle with Trim-Parts black button.
24
www.shiftworks.com
Curved T-Handle
Straight T-Handle
Button Top Knob
Rod Linkage Kit
Smoothie Knob
Cable Kit
Shifters are available as either Rod Linkage or Cable with choice of knob styles. The SW280 has a 5/8’’ diameter handle and is available in 6, 7 or 8 inch length. The SW230 has a 1/2” diameter handle and is available in 6 or 10 inch length. SW280-R Rod Linkage $275.00 SW280-C Cable $275.00 *Cable purchased seperately SW230-R SW230-C
Rod Linkage Cable
$285.00 $285.00 *Cable purchased seperately
T-handle: Add $75.00 for Curved, and $20.00 for Straight.
www.shiftworks.com
25
TRANS-STORMER
CONSOLE HOUSING, CONSOLE MOUNT, INDICATOR & SLIDER Mounts directly to shifter and can be used with or without the Shfitworks console housing. Great for custom applications. NOTE: These indicators are for STANDARD GATE. They will not line up for the short gate.
SW280-014A SW280-014B
3-speed indicator 4-speed OD indicator
$44.50 $44.50
CONSOLE HOUSING Housing is vacuum molded and about 5 inches high x 16 inches long x 6 inches wide with a 1/2 inch deep recess. It can be cut down as required to fit. SW280-CH $38.50
26
www.shiftworks.com
Rod Linkage Shifter
Cable Linkage Shifter
www.shiftworks.com
27
4005 West Reno Ave. Unit E Las Vegas, NV 89118
Shiftworks®
IN-DASH GAUGE CONVERSIONS