Dubai Municipality- Dubai Centrel Laboratory Department-Dubai.pdf

‫إدارة اعتماد تقييم المطابقة‬

DUBAI ACCREDITATION DEPARTMENT

SCOPE OF ACCREDITATION Construction Materials Testing- Green Building Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 03 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Physical/ Mechanical

Accreditation Certificate No: LB-014-TEST Issued by (Head of Section):

Materials/Products

Task Name

Construction Materials

Fire classification of construction products and building elements

Standard method BS EN 13501-1

Classification using test data from reaction to fire tests Light reflectance value (LRV) of a surface. Method of test

BS 8493

Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces

ASTM E1980

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

ASTM C518

Standard Test Methods for Water Vapor Transmission of Materials

ASTM E96

Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 1 of 11 DAC-70-02/F34-A, rev. a (18-09-2012)




Materials/Products Construction Materials


Task Name Thermal insulating products for building applications

Standard method BS EN 1603 AMD-9742

Determination of dimensional stability under constant normal laboratory conditions (23°C/50% relative humidity) Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

ASTM C272

Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

ASTM E136

Thermal insulating products for building applications. Determination of bending behaviour

BS EN 12089

Standard Test Method for Determining the Water Vapour Sorption of Un faced Mineral Fiber Insulation

ASTM C1104/1104M

Method B






Materials/Products

Task Name

Standard method


Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

ASTM C303

Standard Test Method for Measuring Compressive Properties of Thermal Insulations

ASTM C165

Standard Test Methods of Testing Cellular Glass Insulation Block

ASTM C240

Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

ASTM C1139 Clause 11.4

Procedure-A

Clause 11.4: Binder Content Methods of test for inorganic thermal insulating materials

BS 2972 Section 3

Section 3: Bulk Density Preformed flat material







Task Name Methods of test for thermal insulating materials

Standard method BS 2972 Section 14

Section 14: Coarse Shot Content Thermal insulating products for building applications.

BS EN 824

Determination of squareness Thermal insulating products for building applications. Determination of flatness

BS EN 825

Methods of test for thermal insulating materials

BS 2972 Section 18

Section 18: Flexural Strength Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

ASTM C1616


BS 2972 Section 11

Section 11: Moisture content as received






Materials/Products

Task Name

Standard method


Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

ASTM C1335

Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

ASTM C1304

Thermal insulating products for building applications. Determination of tensile strength parallel to faces

BS EN 1608

Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

ASTM C550


BS 2972

Section 12

Section 12: Water Absorption Total Immersion






Materials/Products

Task Name


Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

Standard method ASTM C578 Clause 9

Clause 9: Workmanship, Finish & Appearance Standard Test Method for Apparent Density of Rigid Cellular Plastics

ASTM D1622

Standard Test Method for Compressive Properties of Rigid Cellular Plastics

ASTM D1621

(Forces greater than 20kN) Thermal insulating products for building applications. Determination of the apparent density

BS EN 1602

Thermal insulating products for building applications. Determination of thickness

BS EN 823

Thermal insulating products for building applications. Determination of length and width

BS EN 822







Task Name Thermal insulating products for building applications.

Standard method BS EN 12087

Method 1A & 2A

Determination of long term water absorption by immersion Method 1A: Long term water absorption by partial immersion (drainage) Method 2A: Long term water absorption by total immersion (drainage) Thermal insulating products for building applications.

BS EN 1609

Method A

Determination of short term water absorption by partial immersion Method A: Drainage Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions

BS EN 1604






Materials/Products

Task Name


Standard Test Methods for Cellulosic Fiber Insulating Board

Standard method ASTM C209

Clause: 14

ASTM C302

Procedure A

Clause 14: Water Absorption Standard Test Method for Density and Dimensions of Preformed Pipe-CoveringType Thermal Insulation Procedure A: One piece pipe section Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations Thermal insulating products for building applications.

ASTM C167

BS EN 826

Determination of compression behaviour Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Single-flame source test

BS EN ISO 11925-2






Materials/Products

Task Name


Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

ASTM D2863

Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

ASTMD2126

Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

ASTMC203

Standard Test Method for Determination of Thickness of Aluminum Composite Panel (ACP)

DMS 030

Standard Test Method for Determination of Length and Width of Aluminum Composite Panel (ACP)

DMS 028

Standard Test Method for Determination of Mass Per Unit Area of Aluminum Composite Panel (ACP)

DMS 029

Aluminium composite cladding panels

Standard method

Cl 11.1.7




SCOPE OF ACCREDITATION Construction Materials Testing- Green Building Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 03 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical

Materials/Products Paints & Sealants


Task Name

Standard method

Determination of Volatile Organic Compounds (VOC) content in various materials or coatings by difference method"

DMS 0033

Paints and varnishes

BS EN ISO 11890 Part: 1

Part 1: Determination of volatile organic compound (VOC) content. Difference method Paints and varnishes


Part 2: Determination of volatile organic compound (VOC) content. Gaschromatographic method Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings

ASTM D6191




SCOPE OF ACCREDITATION Construction Materials Testing- Green Building Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 03 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical

Materials/Products Paints & Sealants


Task Name Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

Standard method ASTM E1613

The witnessed test includes the following elements (Arsenic, Cadmium & Mercury) in addition to Lead Thermal


Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

ASTM C177

Thermal insulation

ISO 8302

Determination of steadystate thermal resistance and related properties. Guarded hot plate apparatus




SCOPE OF ACCREDITATION Cosmetics & Personal Care Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Microbiology

Chemical

Materials/Products Cosmetic & Personal Care Products

Cosmetics & Personal Care Products

Task Name

Standard method

Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria

BS EN ISO 21149

Cosmetics. Microbiology. Detection of Escherichia coli

BS EN ISO 21150

Cosmetics. Microbiology. Detection of Pseudomonas aeruginosa

BS EN ISO 22717

Cosmetics. Microbiology. Detection of Staphylococcus aureus

BS EN ISO 22718

Cosmetics. Microbiology. Detection of Candida albicans

BS EN ISO 18416

Cosmetics. Microbiology. Enumeration of yeast and mould

BS ISO 16212

Determination of 1,4 dioxane in cosmetic products by GC-MS

SOP-CP-2001

Determination of toxic metals in cosmetic products by ICP-MS

SOP-CP-2002




SCOPE OF ACCREDITATION Cosmetics & Personal Care Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Chemical

Materials/Products Cosmetics & Personal Care Products

Task Name

Standard method

Determination of preservatives (benzoic acid, methyl, 4hydroxybenzoate, ethyl, 4hydroxybenzoate, npropyl, 4hydroxybenzoate, and nbutyl, 4- hydroxybenzoate) in cosmetic products by HPLC

DMS 1007

Determination of Hydroquinone in cosmetic products by High performance liquid chromatography (HPLC)

DMS 1009

Determination of Hydrogen Peroxide in cosmetic products

EU Directive 82 / 434 / EEC. IC (Edition 2000)

Determination of Free Caustic Alkali in Cosmetics by Potentiometric Titration

DMS 1010

Determination of Total Fluoride in Dental Creams by Ion Selective Electrode

DMS 1011

Determination of Free Formaldehyde in Cosmetic Product

EU Directive 82 / 434 / EEC IV.4 (Edition 2000)






Task Name

Standard method

Determination of zinc in cosmetic products by Inductively Coupled Plasma - Mass Spectroscopy (ICP-MS)

DMS 1012

Determination of Certain Oxidative Colorants in Hair Dyes

DMS 1015

)Phenylenediamines (Ortho, Meta, Para) Determination of Diethylene Glycol in Toothpastes by GC-MS

SOP-CP-2012

Determination of Bitrex (Denatonium Benzoate) in Perfumery Products By High Performance Liquid Chromatography (HPLC)

DMS 1018

Determination of Methanol, Ethanol, Propan-1-ol and Diethyl Phthalate in Perfumery Products By Gas Chromatography Flame Ionization Detector (GCFID)

DMS 1019






Task Name

Standard method

Determination of Allergens (Limonene, Benzyl Alcohol, Linalool, Methyl 2Octynoate, Citronellol, Citral, Geraniol, Cinnamal, Hydroxy-Citronellal, Anisyl Alcohol, Cinnamyl Alcohol, Eugenol, Coumarin, Isoeugenol, Isomethyl Ionone, Lilial, Amyl Cinnamal, Lyral, Amylcinnamyl Alcohol, Farnesol, Hexyl Cinnamaldehyde, Benzyl Benzoate, Benzyl Salicylate, Benzyl Cinnamate) in Perfumery Products By Gas Chromatography-Mass Spectrometry (GC-MS)

DMS 1017

Determination of Water Content in Perfumery Products By Karl Fischer Titration

DMS 1020

Turbidity and Visual Inspection of Perfumery Products

UAE.S GSO 1047/2001

Essential Oil & Fragrance Compounds

By Calculations




SCOPE OF ACCREDITATION Cosmetics & Personal Care Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Chemical Testing

Materials/Products Cosmetic Products

Anti-Dandruff shampoos

Task Name

Standard method

Determination of mercury by ICP-MS

In-House Method

Determination of selenium disulfide by ICP-MS

In-House Method

SOP-CP-2017

SOP-CP-2019




SCOPE OF ACCREDITATION Construction Materials Testing Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Physical/ Mechanical

Materials/Products Aggregate / Soil


Task Name Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of particle size distribution

Standard method BS 1377 Part 2 Clause 9.3 AMD 9027

Clause 9.3: Dry Sieving Method Aggregate

Testing aggregates. Methods for Determination of Ten Per Cent Fines Value (TFV)

BS 812 Part 111 Test: 7.1 (AD-04)

Test 7.1: Aggregates in dry condition Testing aggregates. Methods for Determination of Ten Per Cent Fines Value (TFV)

BS 812 Part 111 Test: 7.2

Test 7.2: Aggregates in a soaked condition Tests for geometrical properties of aggregates

BS EN 933 Part: 1 AMD 20121

Part 1: Determination of particle size distribution. Sieving method Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C136





Materials/Products Aggregate


Task Name Testing aggregates

Standard method BS 812 Part 110 AD-03

Part 110: Methods for determination of aggregate crushing value (ACV) Standard Test Method for Materials Finer than 75µm (No. 200) Sieve in Mineral Aggregates by Washing

ASTM C117

Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

ASTM C127

Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

ASTM C88

Standard Test Method for Sand equivalent value of soils and fine aggregate

ASTM D2419

Testing aggregates

BS 812 Part 105 Section 105.1

Part 105: Methods for determination of particle shape Section 105.1: Flakiness index Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 2 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)






Task Name

Standard method

Testing aggregates

BS 812 Part 105 Section 105.2

Part 105: Methods for determination of particle shape Section 105.2: Elongation index of coarse aggregate Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

ASTM C128

Standard test method for Resistance to degradation of small –size coarse aggregate by abrasion and impact in the los Angeles machine

ASTM C131

Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

ASTM C535

Standard Test Method for Clay Lumps and Friable Particles in Aggregates

ASTM C142







Task Name Tests for geometrical properties of aggregates

Standard method BS EN 933 Part: 7

Part 7: Determination of shell content. Percentage of shells in coarse aggregates Determination of percentage of fully crushed particles in coarse aggregate

DMS-7 (R-07)

Determination of percentage of partially crushed particles in coarse aggregate

DMS-8 (R-07)

Testing aggregates

BS 812 Part: 2 Test: 5.7

Part 2: Methods for determination of density

AMD 10397:1999

Test 5: Determination of particle densities and water absorption- Method for determination of particle density of filler Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

ASTM D546







Task Name Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

Standard method ASTM C29/C29M Clause 10 & 12

Clause 10 - Rodding Procedure Clause 12 - Shoveling Procedure Asphalt

Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

ASTM D2041/ D2041M

Determination of loss of stability of compacted bituminous mixtures using Marshall Apparatus

DMS-10 (R-07)

Computation of voids in compacted bituminous paving mixture

DMS-9 (R-07)

Determination of loss of stability of compacted bituminous mixtures using Marshall Apparatus Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

DMS-10 (R-07)

ASTM D6931





Materials/Products Metallic


Task Name Standard Test Methods and Definitions for Mechanical Testing of Steel Products

Standard method ASTM A370 Clause: 6 to 14 Annex A1

Tensile Test: Clause: 6 to 14 and Annex A1

Concrete / Blocks

Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method

BS EN ISO 2178

Testing hardened concrete .

BS EN 12390 Part: 8

Part 8: Depth of penetration of water under pressure Testing concrete

BS 1881 Part 122

Part 122: Method for determination of water absorption Testing hardened concrete

BS EN 12390 Part: 3 and Part: 7

Part 3: Compressive strength of test specimens Part 7: Density of hardened concrete





Materials/Products Concrete / Blocks


Task Name Testing concrete

Standard method BS 1881 Part 111, Part 114 and Part 116

Part 111: Method of normal curing of test specimens (20°C method) Part 114: method for determination of density of hardened concrete Part 116: Method for determination of compressive of concrete cubes Testing hardened concrete

BS EN 12390 Part: 1

Part 1: Shape, dimensions and other requirements for specimens and moulds Precast concrete masonry units

BS 6073

Part 2 App. B

AMD 4508

Part 2: Method for specifying precast concrete masonry units App. B: Routine rapid control test of compressive strength of blocks by manufacturer (fibre board test) Compressive strength of masonry blocks







Task Name Precast concrete masonry units Part 2: Method for specifying precast concrete masonry units App. A: Information to be given by the purchaser with his inquiry and order Dimension of Masonry Blocks Precast concrete masonry units

Standard method BS 6073 Part: 2 App A AMD 4508

BS 6073 Part: 2

App C

AMD 4508

Part 2: Method for specifying precast concrete masonry units App. C: Determination of block density, concrete density and net area of hollow blocks Density of Filler Blocks Testing hardened concrete

BS EN 12390 Part: 2

Part 2: Making and curing specimens for strength tests Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

ASTM C140 Clause 6: Annex A4.2

Clause 6: Measurement of Dimensions Annex A4.2: Dimension of Paving Blocks Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 8 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)






Task Name Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

Standard method ASTM C140 Clause 8 Annex A4

Clause 8: Absorption Annex A4.4: Absorption Testing Water absorption of blocks Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

ASTM C140 Clause 7, Annex A4 and

Clause 7: Compressive Strength Annex A4.3: Compressive Strength Testing DMS 1: Specification of precast concrete blocks

DMS 1 Part 4 Annex A

Part 4: Paving blocks Annex A: Measurement of dimensions and plan area Compressive strength of paving blocks





Materials/Products Cement


Task Name Methods of testing cement

Standard method BS EN 196 Part: 3 Clause 5

Part 3: Determination of setting times and soundness Clause 5: Standard consistence test Consistency of cement Methods of testing cement

BS EN 196 Part: 3 Clause 6

Part 3: Determination of setting times and soundness Clause 6: Setting time test Setting time of cement Methods of testing cement.

BS EN 196 Part: 6

Part 6: Determination of fineness Methods of testing cement.

BS EN 196 Part: 6 NC

Part 6: Determination of fineness National Annex NC (informative): Method of testing cement for density





Materials/Products Cement


Task Name Methods of testing cement.

Standard method BS EN 196 Part: 1 Clause: 9.2

Part 1: Determination of strength Clause 9.2: Compressive strength Methods of testing cement.

BS EN 196 Part: 1 Clause: 9.1

Part 1: Determination of strength Clause 9.1: Flexural strength Methods of testing cement

BS EN 196 Part: 3 Clause 7

Part 3: Determination of setting times and soundness Clause 7: Soundness test Geotextile

Standard Test Method for Grab Breaking Load and Elongation of Geo textiles

ASTM D4632

Ceramics/ Tiles

Concrete paving blocks

BS EN 1338

Requirements and test methods Measurement of abrasion resistance (wide wheel test)




SCOPE OF ACCREDITATION Construction Materials Testing Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task

Materials/Products

Physical/ Mechanical


Task Name Ceramic tiles

Standard method BS EN ISO 10545 Part: 3

Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density- boiling method Ceramics/ Tiles

Ceramic tiles


Part 4: Determination of modulus of rupture and breaking strength Pre-Stressed Strands

Standard Test Methods for Testing Multi-Wire Steel Strand

ASTM A1061/A1061M

Tensile Strength

Soil

High tensile steel wire and strand for the prestressing of concrete. Specification

BS 5896

Methods of test for soils for civil engineering purposes

BS 1377 Part: 4 Clause: 7 AMD 13925

Part 4: Compaction-related tests . Clause 7: Determination of the California Bearing Ratio (CBR)





Materials/Products Soil


Task Name Methods of test for soils for civil engineering purposes Part 9: In-situ tests

Standard method BS 1377 Part 9, Clause: 2.2 AMD 8246 AD -09

Clause 2.2: Sand replacement method suitable for fine, medium and coarse grained soils (large pouring cylinder method) Methods of test for soils for civil engineering purposes

BS 1377 Part 2 Clause: 9.2 AMD 9027

Part 2: Classification tests Clause 9.2: Determination of particle size distribution- Wet sieving method Methods of test for soils for civil engineering purposes Part 4: Compaction-related tests.

BS 1377 Part 4 Clause: 3.5 AMD 13925 AMD 8259

Clause 3.5: Determination of dry density/moisture content relationshipMethod using 4.5 kg rammer for soils with particles up to mediumgravel size Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 13 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)






Task Name Methods of test for soils for civil engineering purposes .

Standard method BS 1377 Part 2 Clause: 4.5 AMD 9027

Part 2: Classification tests Clause 4.5: Determination of the liquid limit Casagrande apparatus method Methods of test for soils for civil engineering purposes

BS 1377 Part: 4 Clause 3.6 Amd 13925; AMD 8259

Part 4: Compaction-related tests . Clause 3.6: Determination of dry density/moisture content relationshipMethod using 4.5 kg rammer for soils with some coarse gravel-size particles Methods of test for soils for civil engineering purposes

BS 1377 Part: 4 Clause: 3.7 Amd 8259 and Amd 13925

Part 4: Compaction-related tests. Clause 3.7: Determination of dry density/moisture content relationshipMethod using vibrating hammer Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 14 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)






Task Name Methods of test for soils for civil engineering purposes-

Standard method BS 1377 Part: 2 Clause: 6.5 Amd 9027

Part 2: Classification tests Clause: 6.5 Determination of shrinkage characteristics- Linear Shrinkage Methods of test for soils for civil engineering purposes-


Part 2: Classification tests Clause 5.3: Determination of the plastic limit and plasticity index - Method for plastic limit Methods of test for soils for civil engineering purposes-


Part 2: Classification tests Clause 5.4: Determination of the plastic limit and plasticity index - Derivation of plasticity index and liquidity index







Task Name Methods of test for soils for civil engineering purposes

Standard method BS 1377 Part: 7 Clause 7.2

Part 7: Shear strength tests (total stress) Clause 7.2: Determination of the unconfined compressive strength Load frame method Methods of test for soils for civil engineering purposes

BS 1377 Part: 2 Clause: 3.2

Part 2: Classification tests Clause 3.2: Determination of moisture contentOven-drying method Steel Reinforcing Bars

Standard Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM A370 Annex A9

Annex A9: Methods for testing steel reinforcing bars Tensile test of carbon steel bar for concrete





Materials/Products Steel Reinforcing Bars


Task Name Steel for the reinforcement and prestressing of concrete. Test methods. Reinforcing bars, wire rod and wire

Standard method BS EN ISO 15630 Part: 1

Clause 10

Part 1 : Reinforcing bars, wire rod and wire Clause 10: Measurement of the geometrical characteristics Measurement of geometrical characteristics and relative rib area Specification for Carbon steel Bars for reinforcement of Concrete

BS 4449 Clause 9.2

Clause 9.2: Bond classification by surface shape Measurement of projected rib area Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

ASTM A615/A615M Clause 7 & Clause 8

Clause 7: Requirements for Deformations Clause 8: Measurement of Deformations Rib geometry Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 17 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)




Materials/Products Masonry Units


Task Name Methods of test for masonry units


Part 16: Determination of dimensions Methods of test for masonry units

BS EN 772 Part: 1

Part 1: Determination of compressive strength Methods of test for masonry units

BS EN 772 Part: 13

Clause: 7.3

Part:13: Determination of net and gross dry density of masonry units (except for natural stone) Clause 7.3: Gross dry density Methods of test for masonry units

BS EN 772 Part: 13 Clause: 7.2

Part 13: Determination of net and gross dry density of masonry units (except for natural stone) Clause 7.2: Net dry density Bituminous Material

Standard Test Method for Asphalt Content of HotMix Asphalt by Ignition Method

ASTM D6307 Method A





Materials/Products Bituminous Material


Task Name

Standard method

Standard Test Method for Penetration of Bituminous Materials

ASTM D5

Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

ASTM D70

Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

ASTM D6927

Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

ASTM D2726 / D2726M

Computation of voids in compacted bituminous paving mixture

DMS 9 Rev. 2007

Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

ASTM D3549

Standard Test Method for Ductility of Bituminous Materials

ASTM D113







Task Name Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene Standard Test Method for Flash Point of Cutback Asphalt with Tag OpenCup Apparatus

Standard method ASTM D2042

ASTM D3143

Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

ASTM D95

Standard Test Method for Distillation of Cutback Asphalt

ASTM D402

Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

ASTM D2170

Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

ASTM D4402/D4402M

Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

ASTM D7405






Bitumen


Task Name

Standard method

Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

ASTM D6084/D6084M

Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

ASTM D2872

Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

ASTM D6521 and/or AASHTO R 28

Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

ASTM D7175 and/or AASHTO T 315

Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

ASTM D92

Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

ASTM D36/D36M

Standard Test Method for Residue by Evaporation of Emulsified Asphalt

ASTM D6934





Materials/Products Bituminous sheeting


Task Name Flexible sheets for waterproofing


Part 1: Determination of tensile properties. Bitumen sheets for roof waterproofing Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

ASTM D4073

Aggregate/ Bituminous Material

Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

ASTM D5444

Concrete

Testing hardened concrete

BS EN 12390 Part: 5

Part 5: Flexural strength of test specimens Testing concrete

BS 1881 Part: 208

Part 208: Recommendations for the determination of the initial surface absorption of concrete Hardened concrete

Testing concrete in structures

BS EN 12504 Part: 1

Part 1: Cored specimens. Taking, examining and testing in compression





Materials/Products


Task Name

Standard method

Hardened concrete

Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

ASTM C496/496M

Fresh concrete

Testing concrete

BS 1881 Part 125

Part 125: Methods for mixing and sampling fresh concrete in the laboratory Fresh concrete

Testing fresh concrete

BS EN 12350 Part: 7

Part 7: Air content. Pressure methods Standard Test Method for Bleeding of Concrete

ASTM C232/C232M

Testing fresh concrete

BS EN 12350 Part: 2

Part 2: Slump test Testing concrete

BS 1881 Part 108

Part 108: Method for making test cubes from fresh concrete Testing concrete

BS 1881 Part 110

Part 110: Method for making test cylinders from fresh concrete





Materials/Products Fresh concrete

Concrete products (paving blocks)


Task Name

Standard method

Testing hardened concrete Part 2: Making and curing specimens for strength tests

BS EN 12390 Part: 2

Testing fresh concrete Part 1: Sampling

BS EN 12350 Part: 1

Precast concrete paving blocks Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex A.1.2.2: Determination of thickness, length & width Non Rectangular blocks

BS 6717 Part: 1 , and

Precast concrete paving blocks Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex A.2.2: Determination of plan area- Non-Rectangular paving blocks Annex B – Determination of Compressive strength

BS 6717 Part: 1 ; and

DMS 1 Part 4 Annex A.1.2.2

DMS 1 Part 4: Annex A.2.2 & Annex B





Materials/Products Concrete products (paving blocks)


Task Name Precast concrete paving blocks

Standard method BS 6717 Part: 1; and

Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks

DMS 1 Part 4 Annex A.1.2.1

Part 4: Paving blocks Annex A.1.2.1: Determination of thickness, length & width Rectangular blocks Precast concrete paving blocks

BS 6717 Part: 1: ; and

Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks

DMS 1 Part 4 Annex A.2.1 & Annex B

Part 4: Paving blocks Annex A.2.1: Determination of plan area- Rectangular paving blocks Annex B: Determination of Compressive strength DMS 1: Specification for precast concrete blocks

DMS 1 Part 4 Annex C

Part 4: Paving blocks Annex C: Water absorption





Materials/Products Tile adhesives


Task Name Adhesives for tiles

Standard method BS EN 1346

Determination of open time Ceramic tiles. Grouts and adhesives

ISO 13007 Part: 2 Clause 4.1

Part 2: Test methods for adhesives Clause 4.1: Determination of open time Adhesives for tiles. Determination of slip

BS EN 1308

Ceramic tiles. Grouts and adhesives


Part 2: Test methods for adhesives Clause 4.2: Determination of slip Adhesives for tiles

BS EN 1348

Determination of tensile adhesion strength for cementitious adhesives Ceramic tiles. Grouts and adhesives


Part 2: Test methods for adhesives Clause 4.4: Determination of tensile adhesion strength (C) Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 26 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)




Materials/Products Carbon Steel Bars


Task Name Steel for the reinforcement and prestressing of concrete

Standard method BS EN ISO 15630 Part: 1 Clause 5

Part 1: Test methods. Reinforcing bars, wire rod and wire (Tensile properties) Clause 5 – Tensile test Steel for the reinforcement and prestressing of concrete

BS EN ISO 15630 Part: 1 Clause 7

Part 1: Test methods. Reinforcing bars, wire rod and wire (Rebend Test of Steel Bars) Clause 7: Rebend test Steel for the reinforcement and prestressing of concrete

BS EN ISO 15630 Part: 1 Clause 6

Part 1: Test methods. Reinforcing bars, wire rod and wire (Bend Test of Steel Bars) Clause 6: Bend test Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product Specification

BS 4449





Materials/Products Thermoplastic Road Marking


Task Name Methods of test for petroleum and its products

Standard method BS 2000, Part 58

Part 58: Determination of softening point of bitumen. Ring and ball method Hot-applied thermoplastic road marking materials

BS 3262 Part 3 Appendix C

Part 3: Specification for application of material to road surfaces Appendix C : Determination of relative density Hot-applied thermoplastic road marking materials

BS 3262 Part 1 App. C and App. D

Part 1: Specification for constituent materials and mixtures Appendix C: Determination of binder content Appendix D: Determination of the grading of constituents and glass bead content




SCOPE OF ACCREDITATION Construction Materials Testing Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical



Task Name Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests

Standard method BS 1377 Part 3 Clause 3 AMD 9028

Clause 3: Determination of the organic matter content Methods of test for soils for civil engineering purposes

BS 1377 Part 3

Clause 6

AMD 9028

Part 3: Chemical and electro-chemical tests Clause 6: Carbonate content of soil Methods of test for soils for civil engineering purposes

BS 1377 Part 3 Clause 5.2 and Clause 5.5 Amd. 9028

Part 3: Chemical and electro-chemical tests Clause 5.2: Preparation of soil and its acid extract Clause 5.5: Gravimetric method for analysis of acid or water extract or ground water Acid Soluble Sulphate Of Soil








Standard method BS 1377 Part: 3 Clause 7.3 AMD 9028

Part 3: Chemical and electro-chemical tests Clause 7.3: Determination of acid-soluble chloride content Methods of test for soils for civil engineering purposes

BS 1377

Part: 3 Clause 7.2

AMD 9028

Part 3: Chemical and electro-chemical tests Clause 7.2: Determination of water-soluble chloride content Methods of test for soils for civil engineering purposes

BS 1377 Part: 3 Clause 5.3 and Clause 5.5 AMD 9028

Part 3: Chemical and electro-chemical tests Clause 5.3: Preparation of soil and its water extract Clause 5.5: Gravimetric method for analysis of acid or water extract or ground water Water Soluble Sulphate Of Soil Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 30 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)







Standard method BS 1377 Part 3 Clause 9 AMD 9028

Part 3: Chemical and electro-chemical tests Clause 9: Determination of the pH value Cement

Method of testing cement

BS EN 196 Part: 2

Part 2: Chemical analysis of cement Cement - Test Methods Part 2: Chemical analysis by X-ray fluorescence Methods of testing cement

BS ISO 29581 Part: 2

BS EN 196 Part: 2 Clause 4.5.16

Part 2: Chemical analysis of cement Clause 4.5.16: Determination of chloride Concrete

Testing concrete

BS 1881 Part 124 clause 10.2

Part 124: Methods for analysis of hardened concrete

AD-06

Clause 10.2: Determination of chloride content





Materials/Products


Task Name

Standard method

Concrete admixtures

Surface Active Agents – Determination of pH of Aqueous Solutions – Potentiometric Method

GSO ISO 4316: 1994

Water

Standard Test Methods for Chloride Ion In Water

ASTM D512

Standard Test Methods for pH of Water

ASTM D1293

Methods of test for soils for civil engineering purposes

BS 1377 Part 3 Clause 8 AMD 9028

Part 3: Chemical and electro-chemical tests Clause 8: Determination of total dissolved solid

Aggregate

Standard Test Method for Sulfate Ion in Water

ASTM D516

Testing aggregates

BS 812 Part 117 Appendix C

Part 117: Method for determination of watersoluble chloride salts Appendix C: Test method for determination of chloride content of aggregates using a nitric acid extract, for aggregate containing chloride not extracted water Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 32 of 34 DAC-70-02/F34-A, rev. a (18-09-2012)






Task Name Tests for chemical properties of aggregates

Standard method BS EN 1744 Part 1 Clause 12

Part 1: Chemical analysis Clause 12: Determination of acid soluble sulfates Carbon Low Alloy Steel

Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

ASTM E415

Elements : C, Si, Mn, P, S Stainless Steel

Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

ASTM E1086

Elements : C, Si, Mn, P, S, Cr, Mo, Ni, Cu, V, N Physical

Bituminous sheeting

Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

ASTM D5147

Clause 15

Clause 15: Compound Stability Construction Materials

Thermoplastics pipes – Longitudinal reversion – Test method and parameters

BS EN ISO 2505




SCOPE OF ACCREDITATION Construction Materials Testing Dubai Municipality-Dubai Central Laboratory Department- Construction Material Laboratory Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Physical


Materials/Products

Task Name


Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT General quality requirements and testing

Standard method DIN 8078 Clause 5.1

Clause 5.1: Surface Condition Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT General quality requirements and testing

DIN 8078

Clause 5.2

DIN 8078

Clause 5.3

Clause 5.2: Dimensions Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT General quality requirements and testing Clause 5.3: Out-ofroundness (ovality)




SCOPE OF ACCREDITATION Electrical Appliances Testing Dubai Municipality- Dubai Central Laboratory Department- Renewable Energy and Electromechanical Laboratories Section Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task

Materials/Products

Electrical Testing- Household and Similar Household Electrical Appliances Appliances (HOUS)


Task Name

Standard method

General Safety Requirements for Household and Similar Electrical Appliances

IEC 60335-1+ A1 Ed. 4.1

Vacuum cleaners & similar appliance

Particular requirements for vacuum cleaners and water-suction cleaning appliance

IEC 60335-2-2

Electric Irons

Particular Requirements for Electric Irons

IEC 60335-2-3

Spin Extractors & similar appliances

Particular requirements for spin extractors

IEC 60335-2-4

Washing Machines & similar appliances

Particular requirements for washing machines

IEC 60335-2-7

Shavers, clippers and similar appliances

Particular requirements for shavers, hair clippers and similar appliances

IEC 60335-2-8

Grills and Similar Portable Cooking Appliances

Particular Requirements for Grills, Toasters and Similar Portable Cooking Appliances

UAE.S/IEC 60335-2-9

Tumble dryers and similar appliances

Particular requirements for tumble dryers

IEC 60335-2-11

IEC 60335-1 Ed. 5.0 IEC 60335-1 Ed. 5.1

IEC 60335-2-9





Materials/Products

Electrical Testing- Warming plates and Household similar appliances Appliances (HOUS)


Task Name

Standard method

Particular requirements for warming plates and similar appliances

IEC 60335-2-12

Deep Fat Fryers and Similar Appliances

Particular Requirements for Deep Fat Fryers, Frying Pans and Similar Appliances

IEC 60335-2-13

Kitchen Machine and Similar Appliances

Particular Requirements for Kitchen Machine

UAE.S/IEC 60335-2-14

Appliances for Heating Liquids

Particular Requirements for Appliances for Heating Liquids

IEC 60335-2-15

Storage Water Heaters

Particular Requirements for Storage Water Heaters

UAE.S/IEC 60335-2-21

Skin or hair care appliances

Particular Requirements for Appliances for Skin or Hair Care

UAE.S/IEC 60335-2-23

Refrigerating Appliances-Ice-Cream Appliances and IceMakers

Particular requirements for Refrigerating AppliancesIce-Cream Appliances and Ice-Makers

UAE.S/IEC 60335-2-24

IEC 60335-2-14

IEC 60335-2-21

IEC 60335-2-23

IEC 60335-2-24





Materials/Products

Electrical Testing- Microwave Ovens, Household Including Combination Appliances Microwave Ovens (HOUS)


Task Name

Standard method

Particular Requirements for Microwave Ovens, Including Combination Microwave Ovens

UAE.S GSO/IEC 60335-2-25

Commercial dispensing appliances and vending machines

Particular requirements for commercial dispensing appliances and vending machines

IEC 60335-2-75

Electrical Fans

Particular requirements for fans

UAE.S/IEC 60335-2-80

Commercial refrigerating appliances

Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

IEC 60335-2-89

Gas, oil and solid-fuel burning appliances having electrical connections

Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections

UAE.S/ IEC 60335-2-102

Particular requirements for room heaters

IEC 60335-2-30 : 2009

Electrical Testing- Room heaters and Home Appliances similar appliances (HOUS)

IEC 60335-2-25

IEC 60335-2-80

IEC 60335-2-102





Materials/Products

Electrical Testing- Portable heating tools Home Appliances and similar appliances (HOUS)


Task Name

Standard method

Particular requirements for portable heating tools and similar appliances

IEC 60335-2-45: Edition 3.2 2012-01

Insect Killers

Particular requirements for insect killers

IEC 60335-2-59 : Edition 3.2 2009-11

Humidifiers and similar appliances

Particular requirements for humidifiers

IEC 60335-2-98 : Edition 2.2 2008-09-09

Stationary cooking ranges, hobs, ovens and similar appliances

Particular requirements for Stationary cooking ranges, hobs, ovens and similar appliances

IEC 60335-2-6:2014 Edition 6.0

Fabric streamers

Particular requirements for Fabric streamers

IEC 60335-2-85:2002-11 2nd Ed.

Electrical TestingPerformance

Energy Efficiency of Water storage heaters

Methods for measuring the performance of electric storage water heaters for household purposes

IEC 60379

Electrical Testing- Ingress of Protection

Ingress of protection

Degree of protection against water

IEC 60529

Electrical

Switches and similar

Switches for household

IEC 60669-1





Materials/Products


Task Name

Standard method

TestingInstallation (INST)

electrical installation

and similar fixed-electrical installations

Electrical Testing- Material Testing

Material testing (Resistance to fire)

Glow- wire apparatus and common test procedure

IEC 60695-2-10

Ball pressure test

IEC 60695-10-2

Hand held electrical tools and similar appliances

Hand-held motor-operated electric tools –Safety General requirements

UAE.S/IEC 60745-1

Hand held electrical tools and similar appliances

Particular requirements for drills and impact drills

IEC 60745-2-1

Particular requirements for screwdrivers and impact wrenches

IEC 60745-2-2

Particular requirements for grinders, polishers and disk-type sanders

IEC 60745-2-3

Particular requirements for sanders and polishers other than disk type

IEC 60745-2-4

Particular requirements for

IEC 60745-2-5

Electrical Testing- Tools (TOOLS)

Electrical

Hand held electrical

IEC 60745-1




SCOPE OF ACCREDITATION Electrical Appliances Testing Dubai Municipality- Dubai Central Laboratory Department- Renewable Energy and Electromechanical Laboratories Section Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Testing- Tools (TOOLS)

Electrical

Materials/Products tools and similar appliances

Hand held electrical


Task Name

Standard method

circular saws Particular requirements for hammers

IEC 60745-2-6

Particular requirements for spray guns for nonflammable liquids

IEC 60745-2-7

Particular requirements for shears and nibblers

IEC 60745-2-8

Particular requirements for tappers

IEC 60745-2-9

Particular requirements for reciprocating saws (jig and sabre saws)

IEC 60745-2-11

Particular requirements for concrete vibrators

IEC 60745-2-12

Particular requirements for chain saws

IEC 60745-2-13

Particular requirements for planers

IEC 60745-2-14

Particular requirements for

IEC 60745-2-15




SCOPE OF ACCREDITATION Electrical Appliances Testing Dubai Municipality- Dubai Central Laboratory Department- Renewable Energy and Electromechanical Laboratories Section Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Testing- Tools (TOOLS)

Electrical TestingInstallation (INST)

Electrical Testing-

Materials/Products tools and similar appliances

Plugs & socket outlets and similar appliances

Plugs & socket outlets


Task Name

Standard method

hedge trimmers Particular requirements for tickers

IEC 60745-2-16

Particular requirements for routers and trimmers

IEC 60745-2-17

Particular requirements for strapping tools

IEC 60745-2-18

Particular requirements for jointers

IEC 60745-2-19

Particular requirements for band saws

IEC 60745-2-20

Particular requirements for drain cleaners

IEC 60745-2-21

Plugs and socket-outlets for household and similar purposes

UAE.S/GSO IEC 60884-1

Particular requirements for fused plugs

UAE.S/IEC 60884-2-1

Particular requirements for socket outlets for

IEC 60884-2-2

IEC 60884-1

IEC 60884-2-1




SCOPE OF ACCREDITATION Electrical Appliances Testing Dubai Municipality- Dubai Central Laboratory Department- Renewable Energy and Electromechanical Laboratories Section Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Installation (INST)

Materials/Products and similar appliances


Task Name

Standard method

appliances Particular requirements for switched socket-outlets without interlock for fixed Installations

IEC 60884-2-3

Particular requirements for plugs and socket-outlets for SELV

IEC 60884-2-4

Particular requirements for adaptors

UAE.S/IEC 60884-2-5

Particular requirements for switched socket-outlets with interlock for fixed electrical installations

IEC 60884-2-6

Particular requirements for cord extension sets

IEC 60884-2-7

IEC 60884-2-5

Electrical TestingAccessibility to Live Parts

Accessibility to live parts

Protection of persons and equipment by enclosuresProbes for verification

IEC 61032

Luminaries and Lamps

Safety Requirements for Luminaries

General requirements and tests

IEC 60598-1: Edition 8.0 2014-05-26




SCOPE OF ACCREDITATION Electrical Appliances Testing Dubai Municipality- Dubai Central Laboratory Department- Renewable Energy and Electromechanical Laboratories Section Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task (LITE)

Materials/Products

Task Name

Standard method

Fixed general purpose luminaries

Particular requirements Fixed general purpose luminaries

IEC 60598-2-1: Edition 1.0 1979-01-01

Recessed luminaries

Particular requirements Recessed luminaries

IEC 60598-2-2: Edition 3.0 2011-11-08

Luminaries for road and street lighting

Particular requirements Luminaries for road and street lighting

IEC 60598-2-3: Edition 3.1 2011-11-17

Portable luminaries

Portable ge-neral purpose luminaries

IEC 60598-2-4: Edition 2.0 1997-04-28

Flood lights

Particular requirements Floodlights

IEC 60598-2-5: Edition 3.0 2015-08-06

Self ballasted LED lamps

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications

IEC 62560 Edition 1.1 2015-04-17

Self-ballasted lamps for general lighting services Safety requirements

IEC 60968 Edition 3.0 2015-02

Self ballasted CFL lamps

Self-ballasted lamps for general lighting services Performance requirements

IEC 60969 Edition 1.2 2001-03-22

Electro static discharge test for electrical and electronics equipment

Testing and Measurement Techniques – Electrostatic Discharge Immunity Test

IEC 61000-4-2: Edition 2.0 2008-12-09

Self ballasted CFL lamps

Electromagnetic Compatibility





SCOPE OF ACCREDITATION Electrical Appliances Testing Dubai Municipality- Dubai Central Laboratory Department- Renewable Energy and Electromechanical Laboratories Section Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task (EMC)

Battery (BATT)


Materials/Products

Task Name

Standard method

Fast Transient test for electrical and electronics equipment

Testing and measurement techniques – Electrical fast transient/burst immunity test

IEC 61000-4-4: Edition 3.0 2012-04-30

Surge immunity test for electrical and electronics equipment

Testing and measurement techniques – Surge Immunity Test

IEC 61000-4-5: Edition 3.0 2014-05-15

Radio frequency disturbance test for electrical and electronics equipment

Testing and measurement techniques – Immunity to conducted disturbances, induced by radiofrequency fields

IEC 61000-4-6: Edition 4.0 2013-10-23

Harmonics current to electrical and electronics equipment

Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

IEC 61000-3-2: Edition 4.0 2014-05-26

Voltage fluctuation and flicker test on electrical and electronic equipment.

Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

IEC 61000-3-3: Edition 3.0 2013-05-14

Secondary cells and batteries containing alkaline or other nonacid electrolytes

Safety requirements for portable sealed secondary cells, and for batteries Amade from them, for use

IEC 62133: Edition 2.0 2012-12





Materials/Products


Task Name

Standard method

in portable applications




SCOPE OF ACCREDITATION Detergents & Disinfectants Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 03 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical

Materials/Products Toiletries & Detergents

Accreditation Certificate No: LB-014-TEST Issued by (Head of Section): Task Name

Standard method

Determination of Aluminum Chips Content in Drain Cleaners

UAE.S/ GSO 804: 2012

Determination of Sodium Hydroxide in Drain Cleaners

UAE.S/ GSO 804: 2012

Determination of Sodium Nitrate in Drain Cleaners

UAE.S/ GSO 804: 2012

Determination of Sodium UAE.S/ GSO 804: 2012 Chloride or Sodium Sulphate Content in Drain Cleaners Determination of Moisture UAE.S/ GSO 200: 1995 And Volatile Matter Content in Laundry Products Measurement of pH in Laundry Products, Soaps and Disinfectants

UAE.S GSO ISO 4316: 1994

Determination of Total Fatty Matter in Soaps

UAE.S GSO 203: 1995

Determination of Total Free Alkali in Soaps

UAE.S GSO 203: 1995




SCOPE OF ACCREDITATION Detergents & Disinfectants Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 03 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical

Materials/Products Toiletries & Detergents


Standard method

Determination of anionic surfactants content in laundry products by potentiometric titration

In-House Method

Determination of active oxygen content in washing powder by potentiometric titration

In-House Method

Determination of soluble silica in toiletries using ICPMS

In-House Method

Determination of toxic elements in toiletries using ICP-MS

In-House Method

Determination of phosphorus in toiletries using ICP-MS

In-House Method

SOP-CP-2015

SOP-CP-2016

SOP-CP-2018

SOP-CP-2020

SOP-CP-2021




SCOPE OF ACCREDITATION Precious Metals Testing and Hallmarking Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 05 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Physical

Chemical

Materials/Products


Standard method

Gold

Analysis method of gold by X-Ray fluorescence spectrometer

DMS 1001

Silver

Analysis method of silver by X-Ray fluorescence spectrometer

DMS 1021

Platinum

Analysis method of platinum by X-Ray fluorescence spectrometer

DMS 1022

Gold

Determination of gold in gold jewellery alloys. Cupellation method (fire assay)

BS EN ISO 11426

Silver

Jewellery. Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using sodium chloride or potassium chloride

BS ISO 13756




SCOPE OF ACCREDITATION Environmental Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 05 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Microbiology

Materials/Products Water


Standard method

Detection and Enumeration SOP-FE-1601 of coliforms and E.coli in water - Quantity –Tray Enumeration Technique Enumeration of Aerobic Colony count for water

SOP-FE-1603

Detection and Enumeration SOP-FE-1604 Pseudomonas Aeruginosa Detection and Enumeration SOP-FE-1605 of Legionella species Detection and Enumeration SOP-FE-1606 Fecal Streptococci

Chemical

Drinking Water

Detection and Enumeration SOP-FE-1609 of sulphite-reducing clostirdia

Water / wastewater

Determination of pH

SOP-FE-1101

Determination of Conductivity

SOP-FE-1102

Determination of Total Suspended Solids

SOP-FE-1104

Determination of Total Dissolved Solids

SOP-FE-1105




SCOPE OF ACCREDITATION Environmental Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 05 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical

Materials/Products Water / wastewater

Water


Standard method

Determination of Oil and Grease

SOP-FE-1121

Determination of Nitrogen Ammonia LOQ=0.2 mg/L

SOP-FE-1112

Determination of Trace elements in wastewater by ICP/OES including:  Copper (0.05 mg/L),  Cadmium (0.05mg/L),  Zinc (0.05 mg/L),  Nickel (0.1 mg/L),  Chromium (0.1 mg/L),  Lead (0.1 mg/L),  Iron (0.1 mg/L),  Manganese 0.1mg/L),  Cobalt (0.1 mg/l),  Silver (0.1 mg/L),  Magnesium (0.05 mg/l),  Calcium (0.05 mg/l)

SOP-FE-1131

Determination of Organochlorine Pesticides in Water By GC-ECDSolvent Extraction, including:  Trifluralin,  lindane,  alachlor,  aldrin,

SOP-FE-1124

Continue……





Materials/Products Water

Water/ Industrial wastewater


Standard method

Determination of Organochlorine Pesticides in Water By GC-ECDSolvent Extraction, including:  pendimethalin,  alpha chlordane,  dieldrin,  endrin ,  o,p-DDT,  p,p-DDT  methoxychlor @ LOQ=0.1 ug/l

SOP-FE-1124

Determination of Anions by ion chromatography including:  Fluoride,  Chloride,  Sulfate,  Nitrate,  Bromide,  Bromate @ LOQ=0.1 mg/l except bromate (3 ug/l)

SOP-FE-1130

Determination of Metals BY Flame Atomic Absorption Spectrometry including:

SOP-FE-1128

 Copper(0.1mg/l),  Cadmium(0.08mg/l),

Continue…..





Materials/Products


Standard method

Water/ Industrial wastewater

Determination of Metals BY Flame Atomic Absorption Spectrometry including:  Zinc(0.05mg/l),  Nickel(0.2mg/l),  Chromium (0.2mg/l),  Lead (0.5mg/l),  Iron (0.1mg/l),  Manganese (0.05mg/l),  Cobalt (0.12mg/l),  Silver (0.1mg/l)

SOP-FE-1128

Ground Water/ wastewater

Determination of

SOP-FE-1122

Biochemical Oxygen Demand

BOD

Soil

Determination of Chemical Oxygen Demand COD

SOP-FE-1123

Metals in Soil, Sediment and Sludge by FAAS including:  Copper (4 mg/kg),  Cadmium (2 mg/kg),  Zinc (4 mg/kg),  Nickel (16mg/kg),  Chromium (9 mg/kg),  Lead (15 mg/kg)

SOP-FE-1304




SCOPE OF ACCREDITATION Gemstones Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 02 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Physical

Materials/Products Diamond


Diamond Grading

Standard method SOP-CP-1007




SCOPE OF ACCREDITATION Textile Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Physical/ Mechanical

Materials/Products Textile

Task Name Textiles. Tests for colour fastness

Standard method BS EN ISO 105-B02

Colour fastness to artificial light: Xenon arc fading lamp test Standard Test Method for Width of Textile Fabric

ASTM D3774

Standard Test Methods for Length of Woven Fabric

ASTM D3773/D3773M

Standard Test Methods for Mass Per Unit Area (Weight) of Fabric

ASTM D3776/D3776M

Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale

ASTM D2616

Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens

BS 5438

Protective clothing. Protection against heat and flame. Method of test for limited flame spread

BS EN ISO 15025




SCOPE OF ACCREDITATION Textile Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Chemical

Materials/Products Textiles

Task Name Textiles

Standard method BS EN ISO 105-X12

Tests for colour fastness. Colour fastness to rubbing

Test Method: Colorfastness to CrockingCrock meter Method

AATCC 8

Standard Test Methods for Identification of Fibers in Textiles

ASTM D276

Standard Test Methods for Quantitative Analysis of Textiles

ASTM D629

Textiles

BS EN ISO 3071

Determination of pH of aqueous extract Textiles

BS EN ISO 105-E04

Tests for colour fastness. Colour fastness to perspiration Test Method: Colorfastness to Perspiration

AATCC 15




SCOPE OF ACCREDITATION Textile Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Chemical

Materials/Products Textiles

Task Name Textiles

Standard method ISO 14184 Part: 1

Part 1: Determination of formaldehyde. Free and hydrolised formaldehyde (water extraction method) Test Method: Colorfastness to Water

AATCC 107

Determination of extractable heavy metals by acid perspiration solution using ICP-MS

In-House Method SOP-CP-2014




SCOPE OF ACCREDITATION Food Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Microbiology

Materials/Products Food and Food Products

Task Name

Standard method

Detection of Cronobacter Sakazakii in powdered Infant formula

SOP-FE-3121

Analysis of Food using Petriflim method 3M:

SOP-FE-3123

 Yeasts & Molds  E.Coli  Coliforms  ACC  Staph. aureus Enumeration of Entrobacteriaceae in Foods

SOP-FE-3124

Enumeration of Mesophilic aerobic bacteria (Aerobic colony count)

SOP-FE-3103

Enumeration of E.coli Bacteria

SOP-FE-3104

Enumeration of Coliforms Bacteria

SOP-FE-3104

Enumeration of Yeasts and Moulds

SOP-FE-3105

based on FDA Bacteriological Analytical Manual, Chapter 3




SCOPE OF ACCREDITATION Food Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Microbiology

Materials/Products Food and Food Products

Task Name

Standard method

Isolation and Identification of Salmonella Species in Food

SOP-FE-3106

Enumeration of Coagulase positive Staphylococcus aureus

SOP-FE-3107

Enumeration of Bacillus cereus in Foods

SOP-FE-3108

Enumeration of Clostridium perfringens

SOP-FE-3109

Isolation and detection of Listeria Species

SOP-FE-3111

Isolation and detection of E.coli O157:H7 in foods

SOP-FE-3113

Analysis of Food Samples using Rapid Automated Bacterial Impedance Technique (RABIT)

SOP-FE-3117

 ACC ,  E.coli  Coliforms ,  Yeasts and Moulds




SCOPE OF ACCREDITATION Food Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task

Materials/Products

Task Name

Standard method

Microbiology

Food

Enumeration of Pseudomonas aeruginosa and Pseudomonas species

SOP-FE-3115

Molecular Microbiology

Food Products

Detection of Salmonella species by using Bax Detection system.

SOP-FE-3122

Analyte No:1 Detection of Listeria monocytogenesusing Bax system.

SOP-FE-3125

Analyte No:1 Detection of Salmonella spp. by VIDAS UP Salmonella (SPT) Method

SOP-FE-3126

Analyte No:1 Detection of E.coli O157:H7 SOP-FE-3130 using Bax system Analyte No:1 Infant Formula

Detection of Cronobacter sakazakii baby food using Bax system.

SOP-FE-3131

Analyte No:1




SCOPE OF ACCREDITATION Food Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Molecular biology

Chemical

Materials/Products

Task Name

Standard method

Cooked Meat, Meat Products

Detection of Meat Species using Enzyme Linked Immunosorbent Assay (ELISA)

SOP-FE-3120

Food Products

Detection of Pork contaminants in food and feed by using Real-time PCR Technique Analyte No:1

SOP-FE-3129

Food contaminates

Determination of Heavy traces elements in Foods by ICP-MS after pressure digestion:  Arsenic,  Cadmium,  Mercury and  Lead

BS EN 13805

Determination of Gamma Radiation by using sodium iodide Gamma Spectrometer

SOP-FE-2401

Fish and Milk

Foods & water

(Using ELISA Kit)

Radionuclides Cs-137, Cs 134 Milk powder, Dairy products, Yoghurt and cheese

Determination of Fat, Protein, Ash and Moisture by FT-NIR spectrometer

SOP-FE-2206




SCOPE OF ACCREDITATION Food Testing Dubai Municipality-Dubai Central Laboratory Department- Food and Environmental Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 06 Accreditation Certificate No: LB-014-TEST Scope Validity Period: 29-05-2016 to 28-05-2019 Issued by (Head of Section): Type of Task Chemical

Materials/Products Honey, milk & milk products

Task Name Determination of sugars by HPLC method

Standard method SOP-FE-2216

Glucose , Fructose & Sucrose, Lactose, Galactose Food contaminates (Mycotoxins) Cereal and related foods

Determination of Mycotoxin in different food Commodities by UPLC-MS/MS

SOP-FE-2324

 Aflatoxin B1  Aflatoxin B2  Aflatoxin G1  Aflatoxin G2  Ochratoxin A  Deoxynivalenol  Zearalenone  Fumonisin B1  Fumonisin B2  T2 Toxin  HT2 Toxin Pesticide residues in Fruits & Vegetable

Determination of NMethylcarbamatesin Pesticide Residues by QuEChERS Technique using LC/MS/MS:  2,3,5-Trimethacarb,

SOP-FE-2343

Continue…..

 3,4,5-Trimethacarb, Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 5 of 42 DAC-70-02/F34-A, rev. a (18-09-2012)




Materials/Products Pesticide residues in Fruits & Vegetable

Task Name Determination of NMethylcarbamatesin Pesticide Residues by QuEChERS Technique using LC/MS/MS:  4-Bromo-3,5-dimethyl phenyl-Nmethylcarbamate,


 Acephate,  Aminocarb,  Amitraz,  Azinphos-Ethyl,  Buprofezin,  Butocarboxim  Carbetamide,  Chlorfenvinfos,  Chlorpyrifos-Ethyl,  Chlorpyrifos-Methyl,  Cloethocarb,  Diazinon,  Dichlorvos,  Dimethoate,  Diniconazole,  Demetone-S-methylSulfone,  Ethidimuron,

Continue…..






Task Name Determination of NMethylcarbamatesin Pesticide Residues by QuEChERS Technique using LC/MS/MS:


 Ethiofencarb,  Ethion,  Ethoprophos,  Fenamiphos,  Fenobucarb,  Flusilazole,  Fonofos  Heptenophos,  Isoprocarb,  Malaoxon  Malathion,  Mecarbam,  Methidathion,  Metolcarb,  Mexacarbate,  Monocrotophos,  Omethoate,  Oxamyl,  Phenthoate  Phosalone, Phosmet,  Phosphamidon

Continue…..

 Pirimiphos-Ethyl, Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 7 of 42 DAC-70-02/F34-A, rev. a (18-09-2012)







 Pirimiphos-Methyl,  Profenofos,  Propiconazole,  Pyrazofos,  Pyrimethanil,  Quinalphos,  Tetrachlorvinphos,  ThiofanoxSulfoxide,  Triazophos  Bufencarb,  Butoxycarboxim,  ThiofanoxSulfone,  Methamidophos  Thiofanox ,  Formetanate ,  Fenitrothion  Methacrifos,  D-S-Methyl  Aldicarb sulfone  Bendiocarb  Carbofuran Promecarb

Continue…..

 Methiocarb Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 8 of 42 DAC-70-02/F34-A, rev. a (18-09-2012)







 Aldicarb  Methomyl  Carbaryl  Propoxur  Carbofuran -3- hydroxyl  Ethiofencarb sulfone  Ethiofencarb sulfoxide  Methiocarb sulfone  Aldicarb sulfoxide Methiocarb sulfoxide Multi-residue method for analysis of pesticide residues by Acetonitrile extraction & detection-A QuEChERS Approach GC/ECD , GC/NPD and GCMS:

SOP-FE-2346

 Dichlorvos,  Heptenophos,  Diphenylamine,  Monocrotophos,  Pyrimethanil,  Phosphamidon,

Continue…..






Task Name Multi-residue method for analysis of pesticide residues by Acetonitrile extraction & detection-A QuEChERS Approach GC/ECD , GC/NPD and GCMS:


 Chlorpyrifos,  Malathion,  Chlorpyrifos,  Mecarbam,  Methidathion,  Bromophos-ethyl,  Iodofenfos,  Flusilazole,  Ethion,  Carbophenothion,  Pyrazophos,  Methamidophos,  Methacrifos,  Demeton-S-Methyl,  Omethoate,  Phorate,  Dimethoate,  Fonofos,  Disulfoton,  Parathion-methyl,

Continue…..








 Fenchlorphos,  Pirimiphos-methyl,  Parathion-ethyl,  Quinalphos,  Prothiophos,  Buprofezin,  Triazophos,  Phosalone,  Azinphos-ethyl  Alachlor,  alpha-BHC,  beta-BHC,         

gamma-BHC, delta-BHC, Bifenthrin, Bromopropylate, Chlorfenpyr, Cyfluthrin, Cypermehtrin, Deltamethrin, alph-Endosulfan, beta-Endosulfan,

Continue…..






Task Name Multi-residue method for analysis of pesticide residues by Acetonitrile extraction & detection-A QuEChERS Approach GC/ECD , GC/NPD and GCMS:  Endosulfan-sulfate,  Esfenvalerate,  Fenarimol,  Fenpropathrin,  Fenvalerate,  Heptachlor,  Heptachlor-epoxide,  HCB, Imazilil,  Iprodione,  methoxychlor,  metribuzin,  Pendimethalin,  Pentachlorobenzene,


 Permethrin,  o,p-DDD,  p,p-DDD,  p,p-DDE,  p,p-DDT,  Procymidone,  Propiconazole,  Tecnazene,

Continue…..








 Tetradifon, Trifluralin,  Vinclozolin,  lambda-Cyhalothrin,  Amitraz,  Bromophos-methyl,  Chlorfenviphos,  Cyanophos,  Diazinon,  Diniconazole,  Edifenphos,  Ethoprophos,  Fenamiphos,  Fenitrothion,  Malaoxon,  Mevinphos,  Phenthoate,  Phosmet,  Pirimicarb,  Pirimiphos-ethyl,  Profenophos,

Continue…..








 Tetrachlorvinphos,  Tolclofos methyl,  Ditalimphos, Multiresidue Method for Analysis of pesticide residue by GC-MSD QuEChERS Approach:

SOP-FE-2347

 Alachlor,  Aldrin,  Atrazine,  Azinphos Ethyl,  Azinphos Methyl,  Bifenthrin  Bromophos Ethyl,  Bromophos-Methyl,  Bromopropylate,  Buprofezin,  Carbophenothion  Chlordane-A,  Chlordane-G,

Continue…..






Task Name Multi-residue Method for Analysis of pesticide residue by GC-MSD QuEChERS Approach:


 Chlorfenapyr,  Chlorfenvinphos  Chlorothalonil,  Chlorpropham  Chlorpyrifos Ethyl,  Chlorpyrifos Methyl,  Cyanophos,  Cyfluthrin  Cypermethrin,  DDD-o'p  DDD-p'p,  DDE 2,4,  DDE-p'p,  DDT -o'p,  DDT –p'p  Deltamethrin,  Demeton-S-Methyl,  Diazinon,  Dichlofluanid,  Dicloran,  Dichlorvos,  Dieldrin,  Dimethoate,

Continue…..








 Diniconazole,  Diphenyl- amine,  Disulfoton,  Ditalimfos,  D-S-M-S,  Edifenphos,  Endosulfan Sulfate  Endosulfan-a,  Endosulfan-b,  Es- Fenvalerate,  Endrin, Ethion,  Ethoprophos,  Etridiazole,  Fenamiphos,  Fenarimol,  Fenchlorphos,  Fenitrothion,  Fenpropathrin,  Fenthion,  Fenvalerate,  Flusilazole,  Tau-Fluvalinate,  Fonofos,

Continue…..








 Formothion  Furalaxyl,  HCH- d,  HCH- g,  HCH-a  HCH-b,  Heptachlor,  Heptachlor Exo Epoxide,  Heptenophos,  Hexachlorobenzene,  Imazalil,  Iodofenfos,  Iprodione,  Malaoxon,  Malathion,  Mecarbam,  Metalaxyl,  Methacrifos,  Methamidophos,  Methidathion,  Methoxychlor,  Metribuzin,  Mevinphos,

Continue…..








 Monocrotophos,  Myclobutanil,  Omethoate,  Oxadiazon,  Oxadixyl,  Oxychlordane,  Parathion Ethyl,  Parathion Methyl,  Penconazole,  Pendimethalin,  Pentachlorobenzene,  Permethrin,  Phenthoate,  Phorate,  Phosalone,  Phosmet,  Phosphamidon,  Pirimicarb,  Pirimiphos Ethyl,  Pirimiphos Methyl,  Procymidon,  Profenophos,  Propetamphos,

Continue…..








 Propiconazole,  Prothiofos,  Pyrazophos,  Pyridaben,  Pyrimethanil,  Quinalphos  Simazine,  Tebuconazole,  Tecnazene  Tetrachlorvinphos,  Tetradifon,  Tolclofos Methyl,  Tolyfluanide,  Triadimefon,  Triadiminol,  Triazophos  Trifluralin,  Vinclozolin,  L-Cyhalothrin





Materials/Products Veterinary residues in Milk , Tissues and eggs

Task Name Determination of Tetracyclinein food by LC/MS/MS (CCβ - µg/kg):


 Tetracycline -107.976  Epitetracycline -109.889  Anhydrotetracycline109.168  Oxytetracycline -111.976  4-Epioxytetracycline119.490  Chlortetracycline111.795  4-Epichlortetracycline111.378  doxycycline-111.545  Methacycline-112.508 Determination of Antihelmintic (Averrmectins) Residues in Foods by LC/MS/MS (CCβμg/kg):

SOP-FE-2372

 Abamectin-1.31  Moxidectin-45.23  Emamectin-0.98  Eprinomectin-23.69  Ivermectin-0.69  Doramectin-1.11 Note: For history details of accredited conformity assessment activities, please refer to Dubai Accreditation Department, Dubai Municipality. P.O Box: 67, DUBAI-UAE., TEL: 00971-4-3027445, FAX: 00971-4-3362381 Email: [email protected]  web site: http://www.dac.gov.ae Page 20 of 42 DAC-70-02/F34-A, rev. a (18-09-2012)




Materials/Products Pesticide residues in Milk

Task Name Determination of Pesticide and Polychlorinated Biphenyl Residues in Milk by GC/NPD (Extension of scope for new pesticides) (LOQ-mg/kg):


 Azinphos ethyl (0.01)  Chlorfenvinphos- 2 (0.01)  Chlorpyrifos ethyl (0.01)  Chlorpyrifos methyl (0.01)  Diazinon (0.01)  Dichlorvos (0.01)  Ethion (0.01)  Malaoxon (0.01)  Malathion

(0.01)

 Methacrifos (0.01)  Methidathion (0.01)  Mevinphos (0.01)  Pirimphos methyl (0.01)  Profenophos (0.01)  Propetamphos (0.01)  Pyrazophos (0.01)  Triazophos (0.01)  alpha-BHC,  beta-BHC,  gamma-BHC,

Continue…..








 delta-BHC,  HCB,  Aldrin,  Dieldrin,  Heptachlor,  Heptachlor-epoxide,  alpha-chlordane,  beta-chlordane,  alph-Endosulfan,  beta-Endosulfan,  Endosulfan-sulfate,  o,p-DDE,  p,p-DDE,  o,p-DDD,  p,p-DDD,  o,p-DDT,  p,p-DDT,  PCB 28,  PCB 52,  PCB 101,  PCB 118,

Continue…..








 PCB 138,  PCB 153,  PCB 180. Pesticide residues in Spices & Dry Spices

Analysis of Pesticide Residues by Multi-residue Method -A QuEChERS Approach (LOQ-mg/kg):

SOP-FE-2348

 Dichlorvos (0.025)  Mevinphos (0.025)  Methacrifos (0.025)  Heptanophos (0.025)  Omethoate (0.025)  Tecnazene (TCNB) (0.025)  Demeton-S-methyl (0.025)  Diphenylamine (0.025)  Ethoprophos) (0.025)  Chlorpropham (0.025)  Trifluralin (0.025)  Phorate

(0.025)

 BHC-alpha (0.025)

Continue…..





Materials/Products Pesticide residues in Spices & Dry Spices

Task Name

Standard method


SOP-FE-2348

 Hexachlorobenzene (0.025)  Dicloran (Dichloran) (0.025)  Dimethoate (0.025)  BHC-beta (0.025)  Cyanophos (0.025)  Fonofos

(0.025)

 BHC-gamma (Lindane) (0.025)  Propetamphos (0.025)  Pyrimethanil  Diazinon

(0.025)

(0.025)

 Disulfoton

(0.025)

 Chlorothalonil (0.025)  BHC-delta

(0.025)

 Pirimicarb

(0.025)

 Formothion

(0.025)

 Chlorpyrifos-methyl (0.025)  Heptachlor (0.025)  Vinclozolin  Alachlor

(0.025) (0.025)

Continue…..






Task Name

Standard method


SOP-FE-2348

 Demeton-S-methyl sulfone (0.025)  Ronnel (Fenchlorphos) (0.025)  Metalaxyl

(0.025)

 Fenitrothion

(0.025)

 Pirimiphosmethyl (0.025)  Aldrin

(0.025)

 Chlorpyrifos

(0.025)

 Malathion

(0.025)

 Malaoxon (metabolite of Malathion) (0.025)  Fenthion

(0.025)

 Parathion  Triadimifon

(0.025) (0.025)

 Pirimiphos ethyl (0.025)  Heptachlor exoepoxide (0.025)  Pendimethalin (0.025)  Phenthoate (0.025)  Quinalphos  Procymidone  Mecarbam

(0.025) (0.025) (0.025)

Continue…..






Task Name Analysis of Pesticide Residues by Multi-residue Method -A QuEChERS Approach (LOQ-mg/kg):


 Chlordane-trans (gamma) (0.025)  Methidathion (0.025)  DDE-o,p'

(0.025)

 Bromophos-ethyl (0.025)  Endosulfan I (alpha isomer) (0.025)  Chlordane-cis (alpha) (0.025)  Ditalimfos (0.025)  Prothiofos (0.025)  Iodofenphos (Jodfenphos) (0.025)  DDE-p,p' (0.025)  DDT-co,p (0.025)  Dieldrin (0.025)  Endrin (0.025)  Chlorfenapyr (0.025)  Iprodione (0.025)  Carbophenothion (0.025)  Bromopropylate (0.025)  Bifenthrin (0.025)

Continue…..






Task Name Analysis of Pesticide Residues by Multi-residue Method -A QuEChERS Approach (LOQ-mg/kg):    

Pesticide residues in Tissues

SOP-FE-2348

Tetradifon (0.025) Pyrazophos (0.025) Permethrin I (0.025) Permethrin I I (0.025)

Analysis of Pesticides and PCBs Residues by Multiresidue Method -A QuEChERS Approach (LOQmg/kg):               

Standard method

SOP-FE-2349

Aldrin (0.075) Chlordane-a (0.0075) Chlordane-g (0.0075) DDD-o'p (0.0075) DDD-p'p (0.075) DDE 2,4 (0.0075) DDE-p'p (0.0075) DDT -p'p (0.150) DDT 2,4 (0.075) Dieldrin (0.075) Endosulfan Sulfate (0.150) Endosulfan-a (0.075) Endosulfan-b (0.075) HCH- d (0.150) Continue….. HCH- g (0.075)





Materials/Products Pesticide residues in Tissues

Task Name Analysis of Pesticides and PCBs Residues by Multiresidue Method -A QuEChERS Approach (LOQmg/kg):            

Pesticide residues Honey and Dates syrup


HCH-a (0.075) HCH-b (0.075) Heptachlor (0.075) Heptachlor exo epoxide (0.0075) Hexachlorobenzene (0.0075) PCB 28 (0.0075) PCB 52 (0.0075) PCB 101 (0.0075) PCB 118 (0.0075) PCB 153 (0.0075) PCB 138 (0.0075) PCB 180 (0.0075)

Analysis of Pesticides by GC/MSD and LC/MS/MS (A Multiresidue QuEChERS Approach (LOQ-mg/kg):

SOP-FE-2350

 Methamidophos (0.05)  Dichlorvos

(0.05)

 Mevinphos (0.05)  Heptenophos Chemical

Pesticide residues

(0.05)

Analysis of Pesticides by

Continue….. SOP-FE-2350





Materials/Products

Task Name

Standard method

Honey and Dates syrup

GC/MSD and LC/MS/MS (A Multiresidue QuEChERS Approach (LOQ-mg/kg):  Demeton S Methyl (0.05)  Ethoprofos

(0.05)

 Chlorpropham

(0.05)

 Monocrotophos (0.05)  Dichloran (0.05)  Simazine (0.05)  Atrazine

(0.05)

 Cyanophos

(0.05)

 Pyrimethanil (0.05)  Pirimicarb (0.05)  Formothion

(0.05)

 Metribuzin

(0.05)

 Alachlor (0.05)  Parathion methyl (0.05)  Metalaxyl (0.05)  D-S-M-Sulfone

(0.05)

 Pirimiphos methyl (0.05)  Malathion (0.05)  Triadimefon

(0.05)

 Pirimiphos-ethyl (0.05)  Penconazole Chemical

Pesticide residues

Continue…..

(0.05)

Analysis of Pesticides by

SOP-FE-2350





Materials/Products

Task Name

Standard method

Honey and Dates syrup

GC/MSD and LC/MS/MS (A Multiresidue QuEChERS Approach (LOQ-mg/kg):  Chlorfenvinphos (0.05)  Quinalphos (0.05)  Furalaxyl

(0.05)

 Procymidone

(0.05)

 Triadimenol (0.05)  Bromophos ethyl (0.05)  Methidathion (0.05)  Tetrachlorvinphos (0.05)  Ditalimfos

(0.05)

 Fenamiphos

(0.05)

 Imazalil (0.05)  Prothiophos

(0.05)

 Profenophos (0.05)  Oxadiazon (0.05)  Myclobutanil (0.05)  Flusilazole (0.05)  Diniconazole (0.05)  DDD 4,4

(0.05)

 DDT 2,4

(0.05)

 Oxadixyl

(0.05)

 Ethion

(0.05)

 Triazophos (0.05)

Continue…..





Materials/Products

Task Name

Standard method



SOP-FE-2350

 Carbophenothion (0.05)  Propiconazole

(0.05)

 Tebuconazole (0.05)  Phosmet (0.05)  Bifenthrin

(0.05)

 Bromopropylate (0.05)  Fenpropathrin  Phosalone

(0.05)

(0.05)

 Azinphos methyl (0.05)  Cyhalothrin-lambda (0.05)  Fenarimol

(0.05)

 Pyrazophos

(0.05)

 Azinphos ethyl  Permethrin

(0.05) (0.05)

 Pyridaben

(0.05)

 Cyfluthrin

(0.05)

 Fluvalinate-tau  Fenvalerate

(0.05)

 Deltamethrin  Acephate

(0.05) (0.05)

(0.01)

 DSM-Sulfone (0.01)  Malaoxon (0.01)

Continue…..





Materials/Products

Task Name


Analysis of Pesticides by GC/MSD and LC/MS/MS (A Multiresidue QuEChERS Approach (LOQ-mg/kg):  Dichlorvos


(0.01)

 Mexacarbate (0.01)  235tmc

(0.01)

 Metolcarb

(0.01)

 Isoprocarb

(0.01)

 Fenobucarb

(0.01)

 Cloethocarb

(0.01)

 Carbetamide

(0.01)

 Aminocarb

(0.01)

 Malathion

(0.01)

 Dimethoate (0.01)  Tetrachlorvinphos (0.01)  Fenamiphos  Fonofos

(0.01)

(0.01)

 Pirimiphos-methyl (0.01)  Triazophos

(0.01)

 Heptenophos

(0.01)

 Pyrimethanil

(0.01)

 Phosphamidon  Flusilazole  Pyrazofos

(0.01)

(0.01) (0.01)

Continue…..





Materials/Products

Task Name


Analysis of Pesticides by GC/MSD and LC/MS/MS (A Multiresidue QuEChERS Approach (LOQ-mg/kg):  Oxamyl


(0.01)

 Aldicarb sulfone (0.01)  Carbofuran  Promecarb  Methiocarb  Methomyl

(0.01) (0.01) (0.01) (0.01)

 Carbaryl (0.01)  Propoxur

(0.01)

 Carbofuran 3 hydroxy (0.01)  Ethiofencarb sulfone (0.01)  Ethiofencarb sulfoxide (0.01)  Methiocarb sulfone (0.01)  Aldicarb sulfoxide (0.01)  Aldicarb (0.01)  Methiocarb sulfoxide (0.01)  345 tmc (0.01)  Omethoate

(0.01)

Continue…..





Materials/Products

Task Name




(13 Screening only):              Veterinary Drugs residues in Milk and Tissue

Methacrifos Diphenylamine Propetamphos Mecarbam Chlorpyrifosethyl Chlorpyrifosmethyl Fenchlorfos Fenthion Bromophosmethyl Chlordane-g Chlordane-a Phenthoate Dieldrin

Determination of Sulfonamides & Trimethoprim by LCMS/MS:

SOP-FE-2369

 Sulfaguanidine,  Sulfacetamide,  Sulfapyridine,  Sulfadiazine,  Sulfamethoxazole,

Continue…..





Materials/Products Veterinary Drugs residues in Milk and Tissue

Task Name Determination of Sulfonamides & Trimethoprim by LCMS/MS:


 Sulfathiazole,  Sulfamerazine,  Sulfamoxole,  Sulfamethizole,  Sulfabenzamide  Sulfadimidine  Sulfisomidine  Sulfameter  Sulfamethoxypyridazin  Sulfamonomethoxine  Sulfachloropyridazine  Sulfaquinoxaline  Sulfadimethoxine  Sulfadoxine  Trimethoprim Food contaminates Soy and Oyster sauces and seasonings. Food contaminates Edible Oils and fats

Determination of 3-Mono Chloro -1-2 PropaneDiol (3MCPD)

SOP-FE-2391

Determination of Polycyclic Aromatic Hydrocarbons in Edible Oils and fats (LOQ-µg/kg):

SOP-FE-2392

 Benz (a) anthracene (0.4)

Continue…..





Materials/Products Food contaminates Edible Oils and fats

Task Name Determination of Polycyclic Aromatic Hydrocarbons in Edible Oils and fats (LOQ-µg/kg):


 Benzo (k) fluoranthene (0.4)  Benzo (b) fluoranthene(2)  Benzo (g,h,i) perylene(2)  Dibenz (a,h) anthracene (2)  Benzo(a)pyrene (0.4)  Chrysene (2)  Phenanthrene (Screening only)

Oil vegetable shortenings

Determination of Refractive Index

SOP-FE-2260

Determination of Free Fatty Acids

SOP-FE-2261

Determination of Peroxide Value

SOP-FE-2262

Determination of Melting Point

SOP-FE-2263

Determination of Benzo[a]Pyrene using HPLC

SOP-FE-2390

Determination of Iodine value by FTNIR Spectrometer

SOP-FE- 2265





Materials/Products

Task Name

Standard method

Fish oil supplements, eggs and vegetable oils

Determination of Fatty Acid Profile and omega fatty acids in selected foods and food supplements by GC/FID:  Saturates  mono-unsaturated  Poly-unsaturated  Oleic acid -100  Linoleic acid-50  GLA-50  ALA-50  ARA-50  EPA-50  DHA-50  Erucic acid-50

SOP-FE-2264

Milk and milk based Products

Determination of Melamine and Cyanuric Acid Residues in Foods by LC-MS/MS (LOQ-µg/kg)

SOP-FE-2370

 Melamine : 0.1  Cyanuric Acid:0.1 Starch based fried and baked products

Determination of Acrylamide in Food by LC/MS/MS( LOQ - μg/kg) 25

SOP-FE-2373





Materials/Products

Task Name

Fortified Food Products

Determination of Minerals (Fe, Cu, Zn, Ca, Mg, Na, K, P, Mn) in by ICP-OES after Microwave Digestion

SOP-FE-2231

Food and Food Products

Determination of Moisture /Total Solids in Foods by Air oven method

SOP-FE-2203

Determination of total Protein in Foods (and Protein by calculation)

SOP-FE-2210

Determination of Total Ash in Foods by Incineration method

SOP-FE-2211

Total Acidity in Foods

SOP-FE-2213

Determination of pH Value

SOP-FE-2214

Determination of Total Soluble Solids (Brix° )

SOP-FE-2294

Determination of Rhodamine B by paper chromatography (Qualitative Analysis)

SOP-FE-2403

Determination of Fat Content in Foods by Ammonia Digestion Method

SOP-FE-2207

Infant Foods, Dairy Products

Standard method

Using air oven based on AOAC Official methods

Using Kjeldahl method based on AOAC official methods

Using incineration and gravimetry based on AOAC Official methods

Using ammonia digestion and gravimetry based on AOAC Official methods





Materials/Products Milk and milk products

Task Name Determination of Aflatoxins M1 (LOQ µg/kg)


 Aflatoxin M1- 0.05 Energy Drinks, Soft Drinks Foods Supplements

Determination of water soluble Vitamins Vitamins in foods and food supplements by UPLC (LOQ – mg/kg):

SOP-FE-2282

 Thiamine Hydrochloride-1.0  Pantothenic Acid -1.0  Biotin -1.0  Riboflavin – 0.7  Pyridoxine- 1.0  Cyanocobalamine 1.0  Folic Acid- 1.0  Ascorbic Acid – 20  Nicotinic acid- 1.0  Nicotinamide- 1.0 Foods

Detection and Determination of Titanium dioxide in foods (LOQmg/kg)- 10

SOP-FE-2232

Non-Alcoholic Beverages & Foods

Determination of Ethanol contents in non-Alcoholic beverages and foods

SOP-FE-2270 Using Static Headspace GAS Chromatography-FLAME Ionization Detector





Materials/Products

Task Name

Standard method

Nuts Dried Fruits, Cereals, Oil Seeds and their Products

Determination of Aflatoxins - B1, B2, G1, G2, Total B&G

SOP-FE-2320

Food Contact Materials

Determination of Residual Monomers migrated from food packaging into food Simulants by GC-MS ( LOQµg/kg):

SOP-FE-2450

Using Immuno-affinity Column cleanup/with HPLC-FLD based on AOAC official methods 999.07, 971.22

 Benzene – 0.5  Toluene – 1.5  Ethyl Benzene – 0.5  Styrene – 1.0 Food & Soft Drinks

Determination of Preservatives ,Artificial sweeteners & Caffeine in Foods by UPLC LOQmg/kg:      

Soft Drink Fruits & Vegetables

SOP-FE-2280

Caffeine, Benzoic, Sorbic, Acesulfame, Saccharin – 5 Aspartame - 10

Determination of Vitamins C in Soft drinks and other food stuffs

SOP-FE-2281 using HPLC





Materials/Products Foods

Task Name Water soluble synthetic colors (identification):                

Standard method SOP-FE-2285 Using paper chromatography

Quinoline Yellow Tartrazine Sunset yellow FCF Allura Red Amaranth Carmoisine Ponceau 4R Erythrosine Red 2G Indigo carmine Brilliant Blue Patent Blue Brilliant Black Fast Green Green S Brown HT





Materials/Products

Task Name

Standard method

Sudan Dyes in spices condiments and selected foods

Determination of Sudan dyes:  Sudan I  Sudan II  Sudan III  Sudan IV  Para Red  Sudan Red 7B

SOP-FE-2400 using HPLC

Honey, Royal Jelly, Milk, and Sea Food / Veterinary Drugs

Determination of Chloramphenicol in Foods by LC-MS-MS

SOP-FE-2368




SCOPE OF ACCREDITATION Toys Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Mechanical & Physical

Materials/Products Toys


Task Name

Standard method

Safety of toys

BS EN 71 Part 1 Clause 4

Part 1: Mechanical and physical properties

Except 4.14.1c: Toys which a child can enter

Safety of toys

BS EN 71 Part 1 +A3:2014


Clause 4.23

Clause 4.23: Magnetic flux index Safety of toys

BS EN 71 Part 1 +A3:2014


Clause 4.24

Clause 4.24: Yo-yo balls measurements Physical

Chemical

Toys

Finger paint

Safety of toys

BS EN 71 Part 2

Part 2: Flammability

Except Clause: 4.1 (Flow Tests)

Safety of toys

BS EN 71 Part 7 Clause: 4.3

Part 7: Finger paints. Requirements and test methods

EU Directive 82 / 434 / EEC IV.4

Clause 4.3: Determination of free formaldehyde in finger paint




SCOPE OF ACCREDITATION Toys Testing Dubai Municipality-Dubai Central Laboratory Department- Consumer products and Commodities Laboratories Section Karamah, Za’beel Street, Dubai- United Arab Emirates Scope Issue No: 04 Scope Validity Period: 29-05-2016 to 28-05-2019 Type of Task Chemical

Materials/Products Finger paint


Task Name Safety of toys Part 3: Migration of certain elements using ICP-OES Technique  Al (LOQ 4 -16 mg/kg)  Sb (LOQ 2- 6 mg/kg)  As (LOQ 1 - 5 mg/kg)  Ba (LOQ 2 - 5 mg/kg)  B (LOQ 4 -12 mg/kg)  Cd (LOQ 0.1 – 0.4 mg/kg)  Cr (LOQ 1 – 4 mg/kg)  Co (LOQ 0.2 - 1 mg/kg)  Cu (LOQ 2 – 10 mg/kg)  Pb (LOQ 0.5 - 2 mg/kg)  Mn (LOQ 0.5 - 3 mg/kg)  Hg (LOQ 0.5 – 2 mg/kg)  Ni (LOQ 2 - 10 mg/kg)  Se (LOQ 1 – 5 mg/kg)  Sr (LOQ 1 – 3 mg/kg)  Sn (LOQ 4 -15 mg/kg)  Zn (LOQ 3 - 25 mg/kg)

Standard method BS EN 71 Part 3







Task Name Safety of toys Part 7: Finger paints. Requirements and test methods Clause 4.7: Determination of pH in finger paint General methods of test for pigments and extenders Part 9: Determination of pH value of aqueous suspension Safety of toys

Standard method BS EN 71 Part 7 Clause 4.7


BS EN 71 Part 7 Clause 4.4

Part 7: Finger paints. Requirements and test methods Clause 4.4: Migration of certain Elements  Al (LOQ 4 -16 mg/kg)  Sb (LOQ 2- 6 mg/kg)  As (LOQ 1 - 5 mg/kg)  Ba (LOQ 2 - 5 mg/kg)  B (LOQ 4 -12 mg/kg)  Cd (LOQ 0.1 – 0.4 mg/kg)  Cr (LOQ 1 – 4 mg/kg)  Co (LOQ 0.2 - 1 mg/kg)  Cu (LOQ 2 – 10 mg/kg)  Pb (LOQ 0.5 - 2 mg/kg)

Continue…







Task Name Safety of toys

Standard method BS EN 71 Part 7 Clause 4.4

Part 7: Finger paints. Requirements and test methods Clause 4.4: Migration of certain Elements  Mn (LOQ 0.5 - 3 mg/kg)  Hg (LOQ 0.5 – 2 mg/kg)  Ni (LOQ 2 - 10 mg/kg)  Se (LOQ 1 – 5 mg/kg)  Sr (LOQ 1 – 3 mg/kg)  Sn (LOQ 4 -15 mg/kg) Zn (LOQ 3 - 25 mg/kg) Safety of toys

BS EN 71 Part 7 Clause 4.10

Part 7: Finger paints. Requirements and test methods Clause 4.10: Containers Safety of toys

BS EN 71 Part 7 Clause 5

Part 7: Finger paints. Requirements and test methods Clause 5: Product information
