Engine

21 downloads 14217 Views 2MB Size Report
Imprinted and color-coded to specify gas. Highly polished ... Note: Requires bonding wire to ..... 180067 (B734) Johnson / Evinrude 1.5-225 1956-72. 180068  ...
Sec 17_Engine_DMM2012__ 2/14/12 3:12 PM Page 51

New EPA & CARB CERTIFIED. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Low permeation tank virtually eliminates fuel evaporation and fuel loss. Compatible with 1/4" NPT fuel fittings. Ethanol and Alcohol compatible. For use with Attwood Fuel Kits. EPA & Carb Certified. Fuel Gauge.

3 Gallon Fuel Tank

59.88

$

6 Gallon Fuel Tank

69.98

$

333630 (8803LPG2) Perfect for use with small outboards.

333635 (8806LPG2) Adapts to virtually any outboard engine.

12 Gallon Fuel Tank

132.98

$

333645 (8812LPG2) Ideal for pontoon boats where more fuel capacity is needed.

Ultra Gas Tank

59.99

$

481981 (620003LP) 3 Gallon 17" L x 9" W x 10" H Also Available: 482002 (620049LP) 6 Gallon 21.18" L x 13.50" W x 10.00" H $69.99 • Includes 90° fuel withdrawal assembly that rotates 360° to reduce fuel line kinks and a direct sight fuel gauge with glass lens for years of clear viewing. • Seamless one-piece polyethylene construction, 2-stage self-venting fuel cap required by EPA/CARB for 2011. • Non-corrosive and light-weight with a built-in fuel reserve capacity. • Complies with industry requirements. • Meets ABYC standards.

Topside Fuel Tank

Engine

12 Gallon Topside Fuel Tanks

129

$

.98

482019 (8668) Tall Also Available: 482021 (8669) Low $134.98 Manufactured from a sturdy, high-density polyethylene. Lightweight, with stout handles for easy transport, tanks are non-corroding, unbreakable, and dent resistant. Designed with UV-stabilized resin. Certified and comply with industry requirements. Tested for use with blended fuels.

51

218.98

$

806387 (031620) 20 Gallon, 15 W x 28 L x 12.37 H 806440 (031526) 26 Gallon, 19 W x 29.25 L x 12.25 H $287.98 Add fuel capacity without changing existing tanks. Seamless construction, leakproof, and corrosion resistant. Rotationally molded polyethylene for maximum strength and reliability. Comes with aluminum withdrawal fittings and plastic fill cap, with gauge and vent.

Cap Assembly

13.98

$

482505 (621501-10) with dipstick

Sec 17_Engine_DMM2012__ 2/14/12 3:13 PM Page 52

engine 1-1/2" Deck Fills Enhanced 316 Stainless Steel

24.98

$

333628 (66061-3) Replacement Cap & Chain

Chromalex Gas Fill with Non-Locking Cap

Combination Gas Fill and Tank Vent

18.98

26.98

$

$

534431 (1313 DP0 CHR)

534467 (1319 DPG BLK)

Chrome plated zinc. Black plastic flange and cap. Complete with grounding screw, cap retainer and gasket. Locking cap has a cover for the key hole. Hose size 1-1/2". Flange OD 3-1/8". Neck length 1-7/8".

Black plastic. Integral tank vent with flame arrestor. Flip top cap. No deck plate key or ground wire required. Marked “Gas”. Fuel hose size 1-1/2". Vent hose size 5/8". Neck length 2-7/16".

Imprinted and color-coded to specify gas. Highly polished finish. Flush cap is slotted for separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately. Note: Requires bonding wire to prevent sparking when nozzle is inserted.

Flanged “Gas” Deck Fill

24.98

$

7-0892 with Spill Guard Stamped stainless steel. Designed for use with 1-1/2" hose.

Fuel Vent

22.98

$

7-1020 Straight 5/8" Includes stainless steel nut

5 Hole Gasket

13.98

$

808494 (035728-10) for Electric and Mechanical Sending Units

3-Way Brass Valve

24.98

$

Permanent Below Deck Fuel Tank

7-6944 1/4 FNPT NMMA Fire Test Approved. Connects motor to two permanent tanks. Withdrawals from one tank at a time

239.98

$

806515 (032518) 18 Gallon, 18-1/4 W x 36-1/2 L x 7-1/4 H 806503 (032512) 12 Gallon, 18-1/2 W x 24-1/2 L x 7-1/4 H $169.98

Seamless construction, leakproof and corrosion resistant. Rotationally molded polyethylene for maximum strength and reliability. Tanks complete with fill adapters, vents and fuel level senders.

UNIVERSAL ELECTRIC FUEL SENDERS

7-2030 Fits Tank Depth: 4" to 24" • Ideal for diesel and gasoline application! • Direct OEM replacement. • Rotates in 90° increments to avoid baffles and tank wall interference. • 100% Pre-ispected to ensure full range of calibration from empty to full. • 33 to 240 Ohm’s an industry standard.

7-6960 Fits Tank Depth: 6" to 12" Also Available: 7-6961 Fits Tank Depth: 6" to 24" $26.98

Engine

33.98

$

25.98

$

• Calibrated for 33 to 240 ohms-an industry standard • 100% pre-inspected to ensure full range of calibrated reading from empty to full • Complete kit includes gasket and screws • For use with gasoline or diesel (with separate return line) applications • Not for use in water • Made in USA

52

Sec 17_Engine_DMM2012__ 2/14/12 3:13 PM Page 53

Fuel Line & Tank Connecters • Plated brass for corrosion protection • Viton® balls & stainless steel springs

• Specifically designed for use with Ethanol E10 & E85 fuel blends

7-6890

EPA Certified Primer Bulb YOUR $ .98 CHOICE!

22

7-6925

Yamaha Connectors Order No. Description

Honda Connectors Price

7-6925 Blue, Female Fuel Line, 5/16" Barb $15.98 7-6926 Blue, Female Fuel Line, 3/8" Barb $17.98

Order No. Description

Price

7-6890 Female - Gray Square Peg Hole, 3/8" Barb

$7.98

7-6898

7-6936

Suzuki Large (75 HP & Up) Connectors

Tohatsu Connectors

Order No. Description

Order No. Description

7-6936 Male Tank, 1/4 NPT

333615 (93014LP7) 1/4" I.D. 333620 (93038LP7) 3/8" I.D. 333624 (93516LP7) 5/16" I.D.

Price

$7.98

The Attwood multi-layer primer bulb allows you to prime with almost half the strokes of the leading competitor. It is designed for high performance priming in harsh marine environments. This non permeation material design prevents fuel evaporation saving fuel and money. It is engineered to maintain flexibility in cold temperatures and prevent collapse or bursting in hot conditions. Compatible with ethanol blended fuels they meet all of the EPA and CARB requirements in addition to the requirements of the USCG and ABYC.

Price

7-6898 Male Tank, 1/4 NPT

$7.98

Fuel Demand Valve

Universal Sprayless Connector

10.98

$

333680 (8838US6) Eliminate spraying fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. Includes male and female connectors for use with all standard marine fuel tanks – 1/4 NPT fittings. High-strength check valves seal automatically when disconnected. Convenient one-button release. Compatible with Ethanol blended fuels.

Brass Male Tank Fitting

10.98

$

7-0913 1/4 NPT Mercury (Newer Larger Style)

28.98

$

333685 (9300FDV7) The fuel demand valve keeps pressurized fuel from reaching and flooding your engine. It helps to eliminate engine performance issues that could result. Compatible with ethanol blended fuels.

As Seen On

EPA Primer Bulbs

YOUR CHOICE!

7-6718 3/8" Black 7-6722 5/16" Black

Blue Fuel Hose

26.98

$

Meets EPA low permeation mandates. Long life and dependable. Ethanol resistant, use with ethanol enriched fuels.Prevents back flow with built-in check valve.

7-6799 3/8 (9mm) ID x 10' Meets EPA Low Permeation Mandates and the Stringent Requirements of SAE J1527 B1-15 & ISO 8469. Ethanol E10 & E85 compatible. Flexible, Kink Free Performance.

Engine

Grey Fuel Hose

24

$

.98

7-6798 3/8 (9mm) ID x 10' Meets EPA Low Permeation Mandates. Ethanol resistant, 3/8 double walled hose. E10 & E85 Compatible. Kink free performance.

53

22.98

$

YOUR CHOICE! 7-6728 3/8" Blue

27.98

$

7-6732 5/16" Blue

Meets EPA Low Permeation Mandates & the Stringent Requirements of SAE J1527 B1-15 & ISO 8469. Specifically designed for use with ethanol E10 & E85 fuel blends. Works with both gasoline or diesel fuels. Rapid prime with dual big bore check valves. Viton® balls & stainless steel springs for greater longevity and better prime every time. Stainless steel clamps. Specially formulated blue material stays pliable, even in cold weather.

Sec 17_Engine_DMM2012__ 2/14/12 3:14 PM Page 54

EPA Primer Bulb

21.99

$

Jerry Cans

B766488 (766488) 3/8" B766492 (766492) 5/16" B766493 (766493) 1/4" (Oil) $21.40

26.98

$

481952 (005096) 5 Gallon, Spill Proof Also Available: 481954 (005898) 5 Gallon, Diesel - Spill Proof $25.98 Scepter Jerry Cans are manufactured from high density, unbreakable polyethylene that is rustproof, crushproof and non-corroding. Features a reversible self-venting spout for simple and safe pouring. Durable, molded-in handle provides for comfortable carrying. Features an automatic shut-off spout that stops overflows, closes reflexively after use, and self-seals to guard against vapor emission while not in use. Special funnel permits convenient and safe filling of on-road vehicles.

3/8" x 6' Fuel Line Kits with Universal Sprayless Connector & Fuel Demand Valve YOUR $ .88 CHOICE!

64

J/E Fuel Line Assemblies

53.98

$

B766489 (766489) 5/16" x 8' with Engine & Tank Connectors Also Available: B766490 (766490) 3/8" x 8' with Engine Connector $49.98 B766491 (766491) 3/8" x 10' $54.98 B766494 (766494) 3/8" x 10' with Engine & Tank Connectors $57.98

Our new low permeation fuel line kits meet all EPA requirements. A re-engineered primer bulb along with new barbs and stepless clamps add strength and leak resistance. EPA certified compliant hose and fuel line. Ethanol compatible. 2 year warranty. 333650 (93806AUSD7) Mercury, Mercury pre-1998 & Mercury/Mariner 333655 (93806EUSD7) Evinrude 333660 (93806HUSD7) Honda 333665 (93806MUSD7) Mercury & Mercury/Mariner 333670 (93806UUSD7) Universal & Non-Marine 333675 (93806YUSD7) Yamaha

LIMITED QUANTITIES AVAILABLE

Why Blue?

- Kink-Free Performance! - Proven Fuel Hose Barb Design Some manufacturers have strayed from tried and true hose barb solutions to meet new EPA mandates. This new hose barb design is their work-around to seal the internal liner of some EPA-certified hoses to avoid fuel leakage.

Marpac Premier Fuel Line Assemblies Order No. Description

7-6802 J/E, BRP replaces OEM #398549 7-6805 Mercury Bayonet Style with aluminum fittings, replaces OEM #32-80188A 2 7-6806 Mercury Clip Style 7-6808 Yamaha, replaces OEM #6Y2-24306-05-00 7-6809 Universal fit end assembly 7-6810 Universal fit end assembly, Extra Long

Price

$32.98

• Meets EPA Low Permeation Mandates and the Stringent Requirements of SAE J1527 B1-15 & ISO 8469 • Ethanol resistant • Kink Free Performance • Rapid Prime with Dual Big Bore Check Valves • Viton® and stainless steel components for greater longevity and better prime every time • Stainless steel clamps • Special blue bulb stays pliable even in cold weather • Available with color coded connectors where applicable • Fuel line assemblies include 3/8" fuel line, primer bulb, clamps and engine & tank connectors (except universal assemblies do not include connectors)

Engine

EPA CERTIFIED

$38.98 $32.98 $33.98 $26.98 $38.98 54

Sec 17_Engine_DMM2012__ 2/14/12 3:14 PM Page 55

Racor Inside Fuel / Water Separator Kit with Bowl

67.98

$

7-0846 with Composite Head Also Available: 7-0842 with Stainless Steel Head $102.98 7-6879 with Nichronium Head $86.98 7-0843 Filter with Clear Bowl $59.98 7-0844 Replacement Filter $27.98 7-0845 Replacement Clear Bowl $39.98 •Kit includes Universal Filter Head, Hose Barbs, Plugs, Thread Sealant, & Fuel Filter • For all 2 & 4 Cycle engines • High Efficiency 10 Micron Media filters out 99% of water and 98% of contaminates • Clear bowl extends the life of the filter by allowing water to be drained from the fuel system • 3/8 NPT ports provides high fuel flow • Meets OEM specs • Maximum Media surface area for high dirt holding capacity • Filter media sheds water instead of absorbing it • E-10 Ethanol Compatible • For Vacuum (Suction Side) Applications. • Water collecting bowl is reusable • For Portable Marine Fuel System Only

Stainless Steel Filter Bracket

MarPlate Filter Bracket

55.98

$

23.98

$

7-6876 Universal

Fuel/Water Separating Filter Kit with Racor Filter

129.98

$

7-0879

• 10 Micron filtration ensures fuel arrives at the outboard engine(s) clean of contaminants & water • Stainless steel filter head increases corrosion protection • High flow filter head design with 3/8 NPT ports • Clear contaminate collection bowl with drain valve included • Can be used with all 2 & 4 stroke engines • Kit includes Universal Filter Head, Hose Barbs, Plugs, Thread Sealant, Clear Contaminate Collection Bowl & 10 Micron Water Separating Fuel Filter • For portable fuel systems only

7-0870 Universal

11/16" threads, 3/8" ports for maximum fuel flow.

11/16" threads, 3/8" ports for maximum fuel flow.

Fuel / Water Separator Filter Kits Kit includes Universal Filter Head, Hose Barbs, Plugs, Thread Sealant, & One or Two 10 Micron Water Separating Fuel Filter • Corrosion resistant filter head choices • High flow filter head design with 3/8 NPT ports • 10 Micron filtration ensures fuel arrives at the outboard engine(s) clean of contaminants & water

Engine

with Stainless Steel Head

61.98

$

• E-10 ethanol compatible • Will not separate 2-cycle oil from gasoline • Can be used with all 2 & 4 stroke engines

with Marplate Head

32.98

$

with Composite Head

27.98

$

7-0878 1 Filter 7-0871 1 Filter 7-0847 1 Filter Also Available: Also Available: Also Available: 7-0874 2 Filter Value Pack $64.98 7-0873 2 Filter Value Pack $37.98 7-0858 2 Filter Value Pack $33.98 55

with Nichronium Head

55.98

$

7-6874 2 Filter Value Pack

Sec 17_Engine_DMM2012__ 2/14/12 3:14 PM Page 56

• Designed for use with Portable Marine Fuel Systems • Clear bowl for quick checks on fuel quality, remove water or change filter before there is a problem • 10 Micron filter cartridge is replaceable (Order # 7-6858) & disposable • Ethanol fuel compatible with Viton® Seals that won’t shrink • Red float indicates water that needs to be drained (on drain models)

Filter Assembly with Drain (No Head)

40.98

Composite Head & Filter Assembly Kit without Drain

47.98

$

51.98

$

7-6856

$

7-6854

Mercury Fuel Filter Replacement

34.88

$ Fuel / Water Separator Filter

8

$ .98

4-7981 Fits Mercury outboard engines. Direct OEM replacement. 2 Micron.

Nichronium Head & Filter Assembly Kit with Drain

76.98

$

7-6864

7-6862

E.Z. View In-Line Filter

9

$ .98 7-0875 Universal In-Line Fuel Filter Also Available: 7-0876 Replacement Filter Elements $5.98

Engine

Filter Assembly without Drain (No Head)

Superior filtering. Transparent housing. Fits all boats, cars & trucks using carbureted fuel systems. Replaces any 1/4", 5/16" and 3/8" inline filter. For portable fuel systems only.

7-0860 56

Sec 17_Engine_DMM2012__ 2/14/12 3:14 PM Page 57

Engine Tune-Up

Carb X™

10.49

17.99

$

$

Fuel Stabilizer

6

$ .99

B765740 (765740) 13 oz. spray

B765735 (765735) 12 oz. • Formulated minimize carbon deposit build up in 2-Cycle and 4-Cycle marine engines • Protects Engine Parts • Reduces the possibility of piston ring sticking • Helps keep valves free of carbon

B765732 (765732) 8 oz. Formulated to protect fuel system components and extends the useful life of fresh gasoline. Recommended year-round use and off-season storage.

Removes gum, varnish & excessive carbon deposits from rings, pistons, valves & ports. Spray intake for improved performance.

Star Tron Gas Additive

9

$ .98 675848 (93008) 8 fl. oz., Treats 128 Gallons Also Available: 675849 (93016) 16 fl. oz., Treats 256 Gallons $14.98 675851 (93032) 32 fl. oz., Treats 512 Gallons $24.98 • Reduces all emissions. • Prevents fuel oxidation and stabilizes fuel chemistry for at least 1 year. • Lowers fuel system maintenance. • Eliminates carbon build-up in fuel delivery system and on exhaust components. • Increases fuel economy.

5

$ .98 290546 (05343) 12 fl. oz.

Engine Tune-Up & Decarbonizer

Removes water from gasoline. Cleans and protects fuel system. Prevents fuel line freezing. Inhibits corrosion. Assures faster starting and quicker pickup. Sold each. Standard pack 12.

7

$ .98

Star Tron Diesel Additive

12

$

CRC Gas Additive for Gas Tanks

.98

675807 (06121) 13 fl. oz.

675846 (93108) 8 fl. oz., Treats 256 Gallons Also Available: 675850 (93116) 16 fl. oz., Treats 512 Gallons $17.98 Uses unique enzyme formula to make all diesel engines start more easily and run more smoothly. Reduces all emissions, including carcinogenic, particulate smoke and soot. Prevents fuel oxidation and stabilizes fuel chemistry for up to 2 years. Lowers fuel system maintenance. Eliminates carbon build-up from burners, injectors and exhaust components. Increases fuel economy and engine performance. Enzymes disperse moisture throughout fuel so that it can be eliminated as the engine operates. Can improve cetane of old, substandard diesel fuel. An ideal alternative to traditional biocides.

Star Tron Tank Cleaner

31.50

$

675852 (93664) 64 fl. oz. • Exceptional in cleaning sludge and algae from gasoline and diesel tanks. • Removes water that encourages microbial growth in diesel fuel. • Enzyme will clean tanks better than any tank cleaning service. • Exceptional at eliminating varnish and gum "gel" from E-10 gas after a water phase-separation occurrence.

STAR TRON® Shooters

5

$ .98 Engine 57

431328 (14301) 2 Pack / 1 fl. oz. • Blister card holds two 1 fl. oz. bottles • Each bottle treats up to 6 gallons • Cures & prevents ethanol fuel problems • Disperses water throughout fuel so that it can be eliminated while the engine runs to help prevent phase separation; improves performance • Ideal for outboards, snowmobiles, ATVs, generators, motorcycles and all gas-powered equipment • Compact size; fits in toolbox, saddlebag, tackle box or glove compartment • Works in all engines and in all fuel

Gold Eagle Sta-Bil Fuel Stabilizer

6

$ .98 289466 (22206) 10 oz., Treats Up To 25 Gallons Also Available: 289478 (22214) 32 oz., Treats Up To 80 Gallons $19.98 • Keeps fuel fresh for quick, easy starts after storage. • Removes water to prevent corrosion and cleans carburetors and fuel injectors. • Protects engine from gum, varnish, rust, and corrosion. • Prolongs engine life. • Eliminates the need to drain fuel before storage. • For all 2-cycle and 4-cycle gasoline engines.

Gold Eagle Marine Formula Sta-Bil

11.98

$

289492 (22241) 10 oz. 289505 (22240) 32 oz., Treats Up To 320 Gallons $25.98 • Best Ethanol Problem Fighter. • More than four times the fuel systemcleaner than in regular STA-BIL. • Prevents corrosion from moisture and ethanol-induced water attraction. •Improves marine engine performance year-round, not just for seasonal storage.

Diesel Formula STA-BIL

25.98

$

289555 (22254) 32oz - Treats up to 320 Gallons • Prevents sludge and sediment formation. • Cleans & Lubricates fuel injectors to improve performance. • Helps remove water that microbes and algae require for growth. • Recommended for Use at Every Fill Up. • Safe for ALL Diesel Fuels, and ALL Diesel Engines, including Agricultural and Marine.

Sec 17_Engine_DMM2012__ 2/14/12 3:14 PM Page 58

Enjoy the ride! DOEL-FIN® is the original hydrofoil developed by an aeronautical engineer to improve overall performance on any boat with an outboard motor or outdrive unit. Use Doel-Fin on ALL boats, from small dinghies to large ocean cruisers! Doel-Fin was designed to produce maximum lift while minimizing drag. Creating lift in the stern compensates for motor weight for smoother turns, better gas mileage and less stern drag. Molded in 2 pieces of guaranteed unbreakable, high-strength plastic, each foil is designed to flex independently to absorb shock. The positive effects include greater stability, consistent planing at lower RPM, faster out-of-the-hole performance, steadier turns, higher top-end speeds and lower bow rise at all speeds. Doel-Fin improves overall performance, even on boats with well-designed hulls. Save up to 30% on fuel consumption. Faster out-of-the-hole means happier water skiers. Maintain lower planing speeds without constant throttle adjustments for wakeboarding, tubing or beginning skiers. Less bow rise improves visibility and increases The Original safety. Simple 15-minute installation; hardware included. Doel-Fin is Hydrofoil designed for use with small motors, big motors, and inflatable dinghies. Boats with small motors no longer "porpoise" with the bowup when the throttle is applied and achieve planing at lower engine speeds. Big motors benefit from less stern suction, faster planing 322017 (440) Doelfin times and steadier turns. 100% Satisfaction Guaranteed– over 25 years Stable Hydrofoil of testimonials and 1,000,000 customers agree that Doel-Fin delivers. The Doel-Fin stabilizer is sold in sets of left and right fins. Black.

38.98

$

Jabsco Drill Pump

53.98

$ Clymer Motor Repair Manuals

415275 (17215-0000) Complete Kit Also Available: 415287 (17250-0003) Drill Pump Only $31.98

34.98

$

180051 180053 180055 180062 180065 180066 180067 180068 180070 180071 180072 180073 180074 180076 180077 180079 180080 180082 180083 180084 180085 180086 180087 180088 180092 180093 180094 180095 180097 603009 603077

(B781) (B779) (B727) (B740) (B721) (B726) (B734) (B732) (B736) (B783) (B738) (B784) (B785) (B7514) (B714) (B788) (B787) (B7372) (B7352) (B770) (B722) (B723) (B724) (B733) (B786) (B742) (B789) (B744) (B7572) (B7452) (B791)

Suzuki 2-225 1985-91 Suzuki 7.5-22 1992-99 Mercury / Mariner 1975-250 2S Mercury Stern Drive 1964-85 Mercury 3.5-40 1972-89 Mercury 45-225 1972-89 Johnson / Evinrude 1.5-225 1956-72 Johnson / Evinrude 2-40 1973-90 Johnson / Evinrude 48-235 1973-90 Yamaha 2-225 1984-89 OMC CB Stern Drive 1986-93 Yamaha 2-250 1990-95 Yamaha 2-250 1996-98 Force 4-150 1984-99 Mariner 2-220 1976-89 Yamaha 9.9-100 1985-99 Yamaha Stern Drive 1989-91 Johnson / Evinrude 85-300 1995-02 Johnson / Evinrude 2-70 1995-03 Volvo Stern Drive 1968-93 Mercury 3-275 1990-93 Mercury / Mariner 2.5-60 1994-97 Mercury / Mariner 75-225 1994-97 Johnson / Evinrude 2-300 1991-94 Yamaha 2-90 1999-02 Mercury A1,B1,2,3 1986-94 Yamaha 115-250 1999-02 Mercury Stern Drive 1995-97 Honda 4-Stroke 1976-05 Mercury Stern Drive 1998-04 Yamaha 72-225 2000-03

• Pumps up to 3.5 gpm. • Self-priming to 3'. • Provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. • Includes: 3.5 GPM self-priming drill pump that chucks into standard 1/4" or 3/8" drill, (2) 3/4" garden hose thread port adaptors, 3' of 1/2" hose, probe adaptor and 1/4" x 40" dipstick probe. • Not for pumping gasoline or flammable liquids.

Rectangular Cup Universal Motor Flushers Flush away sand, silt, salt and alkali to prevent clogging and corrosion to extend engine life. • Flush away sand, silt, salt and alkali to prevent clogging and corrosion to extend engine life • For use with all lower units that have side water inlets • Improved water flow with rectangular cups will virtually eliminate water leakage for higherpressure flushing. • Installs in seconds, no tools required

5

$ .98 7-0574

Ideal in low-pressure conditions.

Round Cup

4

$ .98 7-0576

Dual Water Feed

22.98

$

7-0573

Engine

• Step-by-step instructions for every job. • Every conceivable part, assembly and system is covered in detail and illustrated by hundreds of photos, drawings and tables prepared specifically for each title. • Also features a 32-page full color section covering lubricants, corrosion prevention, propeller design, tools, test equipment, shop safety and mechanic’s tips. • All manuals are 8-1/2 x 11 in size. Order No. Mfg. No. Description

Ideal for all engines over 50 hp

58