www.intertek.com. Energy Saving Mark CERTIFICATE. Certificate Holder. Name
& Address. : Yuyao Simen Town Wanji Electrics Factory. Simen Industrial Zone ...
Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487
Energy Saving Mark CERTIFICATE Based on the compliance results of product evaluation and surveillance program, this authorizes the Certificate Holder to apply of the Energy Saving Mark shown below to the product; when made in accordance with the descriptions under the conditions set forth in the Certification Agreement and Compliance Test Report herein:
Certificate Holder Name & Address
:
Yuyao Simen Town Wanji Electrics Factory Simen Industrial Zone, Yuyao city, Zhejiang, P.R.China
Manufacturing Site Name & Address
:
Yuyao Simen Town Wanji Electrics Factory Simen Industrial Zone, Yuyao city, Zhejiang, P.R.China
Energy Saving Mark Control No. :
ESM00008
Product Description
:
Single voltage external power supply
Trademark
:
None
Model/Type/Part Number (s)
:
WJA-Y41075500D
Test Report Reference Number
:
SH09031035-014
Relevant Standard(s) / Specification(s)
:
AS/NZS 4665.1:2005
Certificate Reference Number
:
ESM00008-017-00
Certificate Issue Date
:
20-Apr-2009
Certificate Expiry Date
:
19-Apr-2010
NOTE 1: This document is the property of Intertek Testing Services Hong Kong Ltd. and is not transferable. Only the Certificate Holder may reproduce this document. This Certificate is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this certificate. Only the Client is authorized to permit copying or distribution of this certificate and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the agreement. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
