Plating code 4: black anodize in accordance with MIL-A-8625 Type II Class 2 ....
GRPM-CBR Condensed Board Right Angle, Rear Panel Mount Connector. C-4.
Micro-d Hi g h -Pe r form a n c e
C O N N ECT O R S AN D CA BL ES
October 2013
mIL-DTL-83513 AND COMMERCIAL
MICRO−D
mICRO-d
High Performance TwistPin Equipped Connectors and Cables
QPL T
he Glenair family of TwistPin equipped Micro-d connectors offer outstanding mating performance, durability and minimal contact resistance. Micro-D Connectors feature High density micro TwistPin contacts set on .050 centers in arranngements from 9 to 130 contacts. They are availlable with insulated and uninsulated wire, PCB, solder cup and flex terminations and are supplied as QPL or commercial variations. Our Micro-D connectors provide a solution to meet your high–performance requirements including high temperature and hermetic applications and are in stock and available for immediate same day shipment.
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Table of Introduction Contents
Section A High-Performance Micro-D Connectors and Cables Table of Contents Introduction
Micro-D Standard
Materials and
Finishes
Aluminum Alloy 6061 In Accordance Plating code With SAE AMS-QQ-A-250/11: 1: cadmium with yellow accordance chromate conversion with SAE-AMS-QQ-P-416, Plating code coating in Type II, Class 2: electroless 3 nickel in accordance Plating code Arrangements 4: black anodizeContact Plating code Micro-D in accordance with ASTM B733 5: gold nickel in accordance plated in accordance with MIL-A-8625 Type II Class 2 with ASTM B733-90. with ASTM B488 over Plating code electroless 6: chem film Arrangements in accordance Plating code with MIL-C-5541 – Micro-D Contact 33: nickel-ptfe Connector Class 3 in accordance Socketwith Face View M83513. Stainless Steel, 1 300 Series: 5 4 3 2 9 8 7 6 Plating Code 13 12 11 10 3 2 1 7 6 5 4 3: Passivated 11 10 9 8 In Accordance 4 3 2 1 8 7 6 5 1 With SAE AMS 5 4 3 2 17 16 15 14 2700 21 20 19 18 polymer, 30% 25 24 23 22 13 12 glass-filled, 17 16 15 14 21 20 19 18 in accordance 11 10 9 25 socket 15 14 13 12 with MIL-M-24519 7 6 rubber9 in8 accordance 21 socket 15 socket Terminal Block, with A-A-59588 9 socket PCB (LCP & Liquid crystal PPS) polymer, 30% 2 1 6 5 4 3 10 9 8 7 24 23 22 21 20 19 accordance glass-filled or 14 13 12 11 25 18 17 16 1532 31 30 29 28 27 26 with MIL-M-24519 polyphenyl 35 34 33 sulfide, 40% glass-filled in 2 1 Pin Contact 3 7 6 5 4 Beryllium copper, (TwistPin) 11 10 9 8 15 14 13 12 19 18 17 16 1 plated (50 Microinches gold 5 4 3 2 6 accordance 39 38 37 36 9 8 7 in 43 42 41 40 13 12 11 10 47 46 45 44 16 15 14minimum) with ASTM B 51 50 49 48 Code C, over SAE AMS-QQ-N-290, 488 Type II28 Class 23 22 21 20 27 26 25 24 nickel underplate 29 1.27 33 32 31 30 class 2, (30-150 37 36 35 34 in accordance microinches). 19 18 17 23 22 21 20 27 26 25 24 51 socket 37 socket with 31 30 29 28 Socket Contact Phos bronze in accordance 31 socket with ASTM 139 B 488 Type II Class 1.27 (50 gold plated Microinches in accordance in accordance 1 5 4 3 2 with ASTM with SAE-AMS-QQ-N-290,minimum) Code 9 8 7 6 13 12 1 1 10 1 7 16 1 5 14 C, Encapsulant 2 1 20 1 9 18 2 5 24 2 3 22 Class 2, (30-150 over nickel underplate 29 28 2 7 26 (Potting) 33 32 3 1 30 34 microinches). 2 1 Epoxy resin, 6 5 4 3 10 9 8 7 35 14 13 12 11 hysol EE4215/HD3561 39 3 8 37 3 6 18 17 16 15 Jackscrews, 43 42 41 40 22 21 20 19 47 46 45 44 26 25 24 23 Jackposts, 51 50 49 48 55 54 53 52 Float 59 58 57 56 Mounts 63 6 2 61 60 67 6 6 65 6 4 28 27 67 socket 32 31 30 29 Stainless steel, 36 35 34 33 40 39 38 37 44 43 42 41 300 series, 48 47 46 45 51 50 49 passivated in accordance 2 row) with SAE AMS 51 socket (special 2700 Wire Type E: silver-coated 3 2 1 7 6 5 4 copper wire, 200°c., In accordance 11 10 9 8 33 32 31 30 29 28 27 12 14 13 extruded ptfe 18 17 16 1540 39 38 37 36 35 34 Pigtail Wire, 22 21 20 19 41 with NEMA 26 25 24 2348 47 46 45 44 43 42 4 3 2 1 insulation, AS 22759/11 Insulated Hookup 8 7 6 5 HP3 (Replaces 51 50 49 600 12 11 10 9 volts rms, 16 15 14 13 26 25 MIL-W-16878/4) 20 19 18 17 30 29 28 27 24 23 22 21 Wire Type K: 34 33 32 31 with SAE Silver-Coated47 46 45 44 43 42 41 40 39 38 37 36 35 Copper Wire, 200° C., in accordance 55 54 53 52 Extruded PTFE 59 58 57 56 63 62 61 60 with SAE AS 67 66 65 64 insulation, 60 Wire Type J: 71 70 69 68 22759/11 75 74 73 72 high-strength volts RMS, 50 49 48 silver-coated ETFE insulation, 54 53 52 51 75 socket 58 57 56 55 copper 62 61 60 59 600 volts rms, 63 alloy 67 66 65 64 69 68 200° c., In accordance wire, crosslinked modified Pigtail Wire, Wire Finish Code Uninsulated 69 socketwith SAE AS 22759/33 3 2 1 solder dipped 3: solid copper wire in 8 7 6 5 4 13 12 11 10 9 accordance in 35 34 18 17 16 15 14 40 39 38 37 36 23 22 21 20 19 with A-A-59551, Wire Finish Code 63/37 tin-lead 45 44 43 42 41 28 27 26 25 24 50 49 48 47 46 33 32 31 30 29 55 54 53 52 51 gold-plated, 4: solid copper 3 2 1 60 59 58 57 56 7 6 5 4 65 64 63 62 61 11 10 9 8 wire in 20accordance 15 14 13 12 28 27 19 18 17 16 32 31 30 29 22 21 36 35 34 33 26 25 24 23 39 38 37A-A-59551, 41 40 with 45 44 43 42 49 48 47 46 gold-plated 51 50 41
Introduction
Micro-D Specifications
A B
C
Specifications, Arrangements and References
A
Section B
Metal Shell Micro-D for Harnessing Applications
B
Section C
Metal Shell Micro-D for Printed Circuit Boards
C
Section D
Single Row Low Profile Metal Shell Micro-D
D
Section E
Low Profile Metal and Plastic Shell Micro-D
E
Section F
Combo Micro-D for High Power
F
Section G
Micro-D Filter Connectors
G
Section H
Micro-D Hermetic Connectors
H
Section J
Well-Master™ 260 High Temperature Micro-D
J
Section K
Micro-D Special Applications and Modifications
K
Section L
MIL-DTL-83513 Connectors and Hardware
L
Section M
Micro-D Backshells
M
Section N
Micro-D Sav-Con® Connector Savers and Hardware
N
Section P
Micro EdgeBoard / Micro Circular Connectors
P
Latching MicroStrips
Q
Connector
Shell, Metal
D
Section A Introduction
E F
Connector
Shell, Plastic
Interfacial Seal
G H J K L M N P Q INDEX
© 2013 Glenair,
Inc.
GLENAIR, INC.
www.glenair.com
High Performance
• 1211 AIR WAY
Liquid crystal
Fluorosilicone
Micro-D Connectors
• GLENDALE,
and Cables
55 54 53 52 59 58 57 56 63 62 61 60 76 67 66 65 64 80 79 78 77 71 70 69 68 84 83 82 81 75 74 73 72 88 87 86 85 92 91 90 89 96 95 94 93 100 99 98 97
U.S. CAGE
Code
06324 CA 91201-2497 100 socket • 818-247-6000 A-10 • FAX
A B C D E F G H J K L M
68 67 66 73 72 71 70 69 78 77 76 75 74 100 99 83 82 81 80 79 105104103102 101 88 87 86 85 84 110109 108107 106 93 92 91 90 89 115 114 113 112 111 98 97 96 95 94 120119 118 117 116 125 124 123122121 130129128127126
130 socket
N P Q
Printed in U.S.A.
818-500-9912
E-Mail:
[email protected]
INDEX
© 2013 Glenair,
Inc.
GLENAIR, INC.
High Performance
• 1211 AIR WAY
U.S. CAGE Code
06324
Printed in U.S.A.
and Cables • FAX 818-500-9912 • 818-247-6000 CA 91201-2497 E-Mail:
[email protected] • GLENDALE, A-17
Micro-D Connectors
www.glenair.com
Section Q Index Micro-D Hermetic
Page M-10
500-017 500-037 500-047 500-107 507-035
D
507-088 507-142 507-145
E
Index
507-146 507-175
F
507-178 507-198 507-296
G
507-297 780-555
H
2470-1048 GHTM GHTM
J
Entry Backshell Sock Round Cable EMI/RFI Shield Relief Backshell Qwik-Ty Strain Rubber Gasket Mounted Micro-D Covers with Silicone for Rear Panel Metal Protective Rubber Gasket Covers with Silicone Metal Protective Banding Backshell EMI/RFI Elliptical Rubber Gaskets Covers with Silicone Metal Protective Potting Shell Backshell Round Cable Entry Composite EMI/RFI Backshell Round Cable Banding EMI/RFI Dual Entry with Screwlocks Banding Backshell Clamps EMI/RFI Split Shell with Saddle Bar Strain Relief Backshell Backshell Round Cable Entry Elliptical Banding 45° Entry EMI/RFI Straight, Top, and Backshell Split Shell Banding EMI/RFI Elliptical Backshell Saddle Bar Strain-Relief Metal Shell Backshell EMI/RFI Elliptical Shell Backshell Lightweight Metal Rope Side Entry EMI/RFI Covers with Tether Protective Rubber “Marshal Bean” Filter connector Combo Micro-D Assemblies Back-To-Back Cable Circuit Board Headers Right Angle Printed
GHTM GHTM
K
GMDE GMDR GMLM
L N P Q
N-5 N-7 M-26 M-12
GMPM GMPM GMR 7580 GMR 7580C GMR 7590
M-9 M-24
Part No. M-15
GRPM-CBS GSWM MLDM MLDM MLDM MLDM MLDM MWDL MWDL MWDL MWDL
GMR 7590C GMSM GMSM GRPM GRPM GRPM
INDEX
GRPM-CBR
MWDL MWDM MWDM MWDM MWDM
Solder Cup Pre-Wired Board Connector Printed Circuit Connector Vertical Mount Connector Vertical Mount Compact Flange Connector Right Angle Mount Right Angle Mount Compact Flange Wire Connectors Wire and Insulated Solder Cup, Solid Connectors Right Angle PCB Connector Rear Panel Mount Solder Cup Terminated Rear Panel Connector Insulated-Wire Connector Connector Wire Rear Panel Uninsulated Solid Panel Mount Connector Right Angle, Rear Condensed Board
MWDM MWDM -BR MWDM2L MWDM-BS MWDM-CBR MWDM-CBS MWDM-SMR MWEB-128P MWEB-128S MWEB-128S MWEB-184P MWEB-184S MWEB-184S MWEB2L 06324
U.S. CAGE Code
© 2013 Glenair,
Inc.
GLENAIR, INC.
High Performance
• 1211 AIR WAY
Index
M-8
Solder Cup Connectors Connectors Insulated Wire Mount Connector Sealed Rear Panel Environmentally Exit Connector with Right Angle Insulated Wire Connector Latching Micro-D MasterLatch™
GMPM
M
N-5 M-14
Description
Condensed Board Straight, Rear Panel Mount Connector M-23 Spacewire Cable Assembly with Back-to-Back or Single Ended Wiring M-19 Solder Cup Contacts M-17 Metal Shell Insulated Wire Pigtails N-9 Metal Shell Solid Wire Termination G-34Metal Shell Back-To-Back Cables
M-21
B
E-3 E-5 E-7
C D
E-19
E
E-21 E-23
F
B-8
Back-To-Back F-6 Unshielded Cable Assemblies Shielded F-9 Cable Assemblies, Untwisted and Twisted Pair Uninsulated C-32 Wire Connector Board C-40Right Angle, Thru-Hole Connector Sav-Con® C-36 Connector Saver Board C-44 Straight, Vertical Mount Thru-Hole Connector Condensed D-2 Board Right Angle Mount, Thru-Hole Connector Condensed D-5 Board Straight .075 Inch Spacing Connector Right B-2 Angle Surface Mount Connector Vertical B-4 Mount Backplane Connector Straddle B-6Mount Card-Edge Connector Right Angle C-4 Board Connectors
B-10 B-12
G
B-14 B-19
H
C-10 N-2 C-6
P-3 P-4 P-5 P-6 P-7 P-8 P-9 P-10 N-4 N-12 N-10
INDEX
Part Number Index
J
C-14 C-20 C-28
Vertical Mount Backplane Connector Straddle Mount Card-Edge Connector Right Angle Board Connector Printed in U.S.A. Pre-Wired and Solder
Kits, Rear Panel or Rear Panel PCB for Mil Spec and Commercial Parts Stainless Steel Jackscrew Kits with E-Rings for Mil Spec and Commercial Parts
www.glenair.com
A
C-2 B-27
E-9 E-11 E-15 E-17
Plastic Shell Back-To-Back B-23 Cables Plastic Shell Right Angle B-21 PCB Solder Cup Connector B-29 Insulated F-3 Wire Connector
Cup Connectors and Cables MWKQ2L6 •thru FAX 2L9 818-500-9912 Quick Disconnect Micro Circular Connectors • 818-247-6000 CA 91201-2497 E-Mail:
[email protected] Anti-Static Thermoplastic • GLENDALE, Dust Caps and Fluorosilicone Interfacial Seals Index-2 Stainless Steel Jackpost
Micro-D Connectors
Page
J-10Metal Shell Right Angle Printed Circuit Board J-13Plastic Shell Solder Cup Termination J-3Plastic Shell Insulated Wire Pigtails J-7Plastic Shell Solid Wire Termination
INDEX
500-012
C
Micro-D Hermetic
500-011
B
M-25
Description
Part No.
A
K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D
Connectors
and Cables U.S. CAGE Code 06324 GLENAIR, INC. • 1211 Printed in U.S.A. AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Index-3
www.glenair.com
E-Mail:
[email protected]
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-1 E-Mail:
[email protected]
Introduction
Product Selection Guide
High-Performance Micro-D Connectors and Cables Section B: Metal Shell Micro-D for Harnessing Applications
A B
GRPM Solder Cup B-2
GRPM Insulated Wire B-4
Shielded Cable Assembly B-14
MWDM Uninsulated Wire B-19
GRPM Uninsulated MWDM Solder Cup Wire B-6 B-8
MWDM Insulated Wire B-10
MWDM Back-ToBacks B-12
C D E
GMDR Insulated Wire B-21
GMDE GSWM SpaceWire Environmental B-23 B-27
GMLM MasterLatch B-29
Section C: Metal Shell Micro-D for Printed Circuit Boards
F G H
GRPM-CBS C-2
GRPM-CBR C-4
MWDM-BS C-6
MWDM-BR C-10
MWDM-CBR C-14
MWDM-CBS C-20
90° Surface Mount C-28
GMR7580 C-32
J K L M N
GMR7590 C-36
P
GMR7580C C-40
GMR7590C C-44
Section D: Single Row Low Profile Metal Shell Micro-D
Q INDEX
GMSM Solder Cup D-2 © 2013 Glenair, Inc.
GMSM Pre-Wired D-2
GMSM Solid Leads D-3
High Performance Micro-D Connectors and Cables
GMSM Board Mount D-5
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-2 E-Mail:
[email protected]
Introduction
Product Selection Guide
High-Performance Micro-D Connectors and Cables Section E: Low Profile Metal and Plastic Shell Micro-D
A MLDM Metal Shell Solder Cup E-3
MLDM Metal Shell PreWired E-5
MLDM Metal Shell Solid MLDM Metal Shell Back- MLDM Metal Shell Right Wire E-7 to-Back E-9 Angle PCB E-11
B C D
MWDL Plastic Shell Solder Cup E-15
MWDL Plastic Shell Pre-Wired E-17
MWDL Plastic Shell Solid Wire E-19
MWDL Plastic Shell Back-to-Back E-21
MWDL Plastic Shell Right Angle PCB E-23
E F
Section F: Combo Micro-D for High power
G GMPM Solder Cup F-3
GMPM Pre-Wired F-6
GMPM Printed Circuit Board F-9
H J
Section G: Micro-D Filter Connectors
K Solder Cup Filter Connector G-7
Vertical PCB Micro-D Filter Connector G-9
Insulated Wire Filter Connector G-14
L In-Line Filter Adapter G-16
25S Receptacle Assembly
Right Angle PCB Micro-D Filter Connector G-18
Rear Panel Mount Solder Cup Filter Connector G-22
Rear Panel Mount Vertical PCB Filter Connector G-24
ylbmessA elcatpeceR S52
Rear Panel Mount Insulated Wire Filter Connector G-26
© 2013 Glenair, Inc.
N P Q
ylbmessA elcatpeceR S52
Rear Panel Mount Condensed Board Right Angle Filter Connector G-28
M
Edge Board Micro-D Filter Connector G-30
Combo Micro-D Filter connector G-34
High Performance Micro-D Connectors and Cables
EMI Troubleshooter Kit for Micro-D Connectors G-35
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-3 E-Mail:
[email protected]
INDEX
Introduction
Product Selection Guide
High-Performance Micro-D Connectors and Cables Section H: Micro-D Hermetic Connectors
A B
Solder Cup, PC Tail, Insulated Wire H-6
C
Shell Size 9-21, Front Mount H-8
Shell Size 37, Front Mount H-9
Solder Cup, PC Tail, Insulated Wire H-11
Section J: Well-Master™ High Temperature Micro-D
D E
Pre-Wired J-7
Back-to-Back J-10
F
Right Angle PCB Header J-13
Section K: Micro-D Special Applications and Modifications
G
NASA/TP—
H
2003–
21224
2
,
ication
ing, Qualif
ion, Screen
Instructions ST-002: EEE-IN ing and Derat
for EEE
Parts Select
d by: Prepare Sahu Dr. Kusum ed by: er Review g Leideck Dr. Hennin ed by: Approv Lakins Darryl utics and l Aerona stration Nationa Admini Space Center Flight d Space d 20771 Goddar elt, Marylan Greenb
May 2003
J
Mod 474 Keying Option K-2
K
Mod 497 Ground Spring K-4
Mod 428 200°C K-6
Mod 429 Space Grade K-8
Section L: MIL-DTL-83513 Solder Cup and Pre-Wired Connectors and Hardware
L M
Metal Shell L-4
N
Plastic Shell L-7
Board Mount L-10
Hardware L-26
Section M: Micro-D Backshells
P Q INDEX
Round Entry M-6
© 2013 Glenair, Inc.
Round Entry Split Shell Banding Backshell M-9
Round Entry Braid Terminated Backshell M-10
High Performance Micro-D Connectors and Cables
Round Entry Composite Backshell M-12
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-4 E-Mail:
[email protected]
Introduction
Product Selection Guide
High-Performance Micro-D Connectors and Cables Section M: Micro-D Backshells (continued)
A Elliptical Split Banding Backshell M-21
Elliptical Entry M-14
Strain Relief Backshell M-23
Potting Shell M-26
B C
Section N: Micro-D Sav-Con® Connector Savers and Accessories
D Uni-Savers N-2
Shorting Plug Assemblies N-3
Anti-Static Dust Caps N-4
Interfacial Seals N-4
E F G
Metal Covers N-5
Rubber Covers N-9
Hardware N-10
Section P: Micro EdgeBoard and Micro Circular
H J K
MWEB P-2
L
MWKQ P-10 Section Q: Latching MicroStrips
M N
Solder Cup Q-4
Solid Wire Q-6
Pre-Wired Q-7
Right Angle PCB Q-9
P Q
90° Staggered PCB Q-9 © 2013 Glenair, Inc.
Vertical PCB Q-9
Surface PCB Q-13
High Performance Micro-D Connectors and Cables
Back-to-Back Q-15
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-5 E-Mail:
[email protected]
INDEX
Introduction
Six Reasons
A B C D E F G H J K L M N P Q INDEX
To Select a Glenair High- Performance Micro-D Connector...
1
Recognized performance standards.
3
5
The flexibility of easy customization.
Trouble-free mating and un-mating.
Every element of the MIL-DTL-83513 Micro-D is exactly controlled—from terminal spacing to approved wire termination methods. The military standard defines contact resistance, dielectric withstanding voltage, corrosion resistance, shock and vibration tolerances and a wide range of other electrical, mechanical and environmental performance standards. Standardized measurement and test methodologies ensure consistent, predictable performance throughout this broad family of ruggedized, miniature connectors.
Manufacturers of satellite communications systems, geophysical exploration devices, medical diagnostics and industrial equipment face many of the same packaging requirements for reduced size, weight and shape as do their military counterparts. And the ability to design-in a wide range of custom modifications which fit the unique packaging requirements of these specialized applications is a distinct advantage of the Glenair Micro-D —making it the connector of choice for many unique or small quantity applications.
Glenair has perfected a nickel underplating combined with a proprietary duplex gold overplating which provides optimal contact lubricity (anti-galling) and effectively eliminates the oxidation common to copper flash underplating. Glenair’s advanced plating process contributes to the overall durability of the connector by reducing contact engaging and separating forces.
2
4
6
Proven reliability under tough operating conditions.
For applications where interconnect failure is simply not an option, the Glenair high-reliability Micro-D offers a wealth of performance benefits which far outweigh any potential cost savings realized by specifying a lesser caliber connector. If downtime is a critical concern, other connectors cannot match the long-term durability and performance advantages of the MIL-DTL-83513 Micro-D, which include:
Higher current ratings Lower circuit resistance Superior vibration and shock Optimized EMI/RFI shielding Broader operating temperature Better damage resistance Enhanced corrosion resistance Better environmental sealing
© 2013 Glenair, Inc.
Advanced, high temperature tolerance.
Heat from electrical or environmental sources can soften mated contacts over time and reduce contact retention force. Under extreme conditions of shock and vibration this loss of normal retention can result in unstable resistance across the interconnect. This is the case for all types of contacts—machined, drawn, stamped and twisted. But materials selection, fabrication and heat treating techniques enable Glenair’s TwistPin contact to resist high temperature stress relaxation for up to 1000 hours at 125º C and thus perform at levels unmatched by other contact designs .
High Performance Micro-D Connectors and Cables
Fast Turnaround and SameDay Availability.
Are the Micro-D connectors and accessories you need either in stock or able to be manufactured in a short period of time? Glenair has built its reputation on fast turnaround andcan deliver TwistPin products—from discrete connectors to completeassemblies—faster than anyone else inour business.We maintainthe world’slargest inventory of Micro-D connectors and accessories, all available for immediate shipment with no quantity or price minimums.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-6 E-Mail:
[email protected]
S even Points of Electrical Contact
W
hat sets our pins apart This unretouched photograph shows important differences between the TwistPin and stamped pins.
A
Stronger Front End Both types of contacts meet the requirements of MIL-DTL-83513. But only the TwistPin offers a stronger frontend with its seven points of contact, high normal force and better resistance to vibration.
Stamped Pin
The TwistPin size #24 contact has seven strands of BeCu wire surrounding three filler strands . Each strand makes contact with the socket, assuring low resistance, plenty of contact wipe, and excellent shock and vibration performance.
Glenair TwistPin
The MIL-DTL-83513 and MIL-DTL-32139 specifications define the minimum acceptable performance levels for Micro-D and Nanominiature connectors. While the specs are rigid in their performance benchmarks, manufacturers are given considerable leeway when it comes to contact design, crimp fabrication, contact finish and material selection. Stamped and formed contacts, for example, are widely used in Micro-d connectors due to their lowcost and ease of manufacture. But independent testing clearly shows that TwistPin style contacts provide superior performance in such areas as high temperature tolerance, contact retention and crimp strength. If you have already made the decision to use either a Micro-D or Nano sized connector because its ruggedized performance outweighs the potential cost-savings realized in a lesser-caliber connector, then you owe it to yourself to understand the very real differences between stamped pins and the Glenair TwistPin Contact System.
A
Better Crimp Joint Micro-D connectors are factoryterminated to wire. Board mount and insulated wire pigtails have crimp joints where the wire attaches to the contact. Micro-D crimp joints are concealed with epoxy potting. The Micro-D is unique among high reliability mil spec connectors because the mil spec allows stamped crimp barrels and does not specify that the crimping process must use mil spec crimp tools. The thin sheet metal in the stamped pin cannot produce a satisfactory gas-tight crimp joint, so spot welding is required to reduce the chance of failure. 8 Indent Mil Spec Crimp Joint
“B” Crimp With Spot Weld
Split-Tine Contact Systems M39029 Split Tine Contact System
© 2013 Glenair, Inc.
The socket contact is made by machining a copper alloy tube, then cutting a longitudinal slot. The contact is then crimped to bend the tines together. The smallest split tine contact systems are used in connectors with .075 inch spacing. The TwistPin offers improved vibration performance and higher contact density. High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-7 E-Mail:
[email protected]
Introduction
Not All Micro-D’s Are Created Equally
A B C D E F G H J K L M N P Q INDEX
Introduction
A B
The Glenair TwistPin Contact At-a-Glance
C D E F G H J
MicroPin NanoPin
Q A
uestion: Why choose a TwistPin connector?
nswer: Design Flexibility and Reliable Performance If reliability and performance were the only considerations in the design of a micro contact system, everyone would opt for a TwistPin contact and a machined socket and crimp sleeve. But cost and ease of manufacture are significant issues as well, which is why stamped and formed contacts, as well as split-tine M39029 contacts, are still widely used. The Glenair TwistPin Contact System provides a superior wire attachment which translates to lower contact resistance—and it does so under extreme conditions of vibration, shock and high heat. An additional key benefit of the TwistPin contact is the ease of designing a custom package to fit your exact needs. The precision machined components can be readily integrated into a wide range of connector package envelopes.
Inside a Micro-D TwistPin Connector
K L M N P
Connector Shell Socket Contact
T
wistPin Contacts
The TwistPin contact is made with a bundle of beryllium copper wires welded at the tip to form a semispherical radius and “bulged” to create a spring.
Rubber Seal Insulator Rigid Epoxy Encapsulant Connector Shell Rigid Epoxy Encapsulant #24 to #30 AWG Wire
Q
TwistPin Contact
INDEX
Insulator
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-8 E-Mail:
[email protected]
Unsurpassed Experience in Micro/ Nano Flex Circuit Production Glenair has been integrating Micro-D and Nanominiature connectors into flex circuitry for over 30 years. Our technical capabilities include design and layout of turnkey assemblies as well as the production of custom-configured micro and nano interconnects for maximum size and weight savings.
2
Full Spectrum Product Offering Glenair offers a complete range of miniaturized printed circuit board connectors with highreliability TwistPin contacts. We supply both through-hole and surface mount designs in every angle and mounting style for integration into single-sided, double-sided and multilayered flex circuitry.
4
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
A B C D E F G H J K L
3 Termination Expertise Glenair’s experienced workforce is trained and qualified to produce consistently reliable circuit terminations using the most advanced techniques and technologies, including automated solder reflow systems.
Introduction
Four Reasons to Select Glenair for Your Next Micro/ Nano Flex Circuit Project 1
Application Design Our turnkey Micro-D and Nanominiature flex circuit assemblies are produced to exacting specifications. Customer-supplied designs are reviewed and revised to insure the most advantageous utilization of EMI shielding, polarization, strain-relief and connector packaging technologies. At Glenair, the final design solution is optimized to meet the exact mechanical and electronic requirements of the application environment.
M N P Q INDEX
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-9 E-Mail:
[email protected]
Introduction
Micro-D Specifications
Micro-D Standard Materials and Finishes
A B C
Connector Shell, Metal
D E F G H J K L M
Stainless Steel, 300 Series: Plating Code 3: Passivated In Accordance With SAE AMS 2700 Connector Shell, Plastic
Liquid crystal polymer, 30% glass-filled or polyphenyl sulfide, 40% glass-filled in accordance with MIL-M-24519
Terminal Block, PCB (LCP & PPS)
Liquid crystal polymer, 30% glass-filled or polyphenyl sulfide, 40% glass-filled in accordance with MIL-M-24519
Interfacial Seal
Fluorosilicone rubber in accordance with A-A-59588
Pin Contact (TwistPin)
Beryllium copper, gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 Microinches minimum) Code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30-150 microinches).
Socket Contact
Phos bronze in accordance with ASTM 139 gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 Microinches minimum) Code C, over nickel underplate in accordance with SAE-AMS-QQ-N-290, Class 2, (30-150 microinches).
Encapsulant (Potting)
Epoxy resin, hysol EE4215/HD3561
Jackscrews, Jackposts, Float Mounts
Stainless steel, 300 series, passivated in accordance with SAE AMS 2700
Pigtail Wire, Insulated Hookup
Wire Type E: silver-coated copper wire, Extruded PTFE insulation, 600 volts rms, 200°c., In accordance with NEMA HP3 (Replaces MIL-W-16878/4) with SAE AS 22759/11 Wire Type K: Silver-Coated Copper Wire, Extruded PTFE insulation, 60 volts RMS, 200° C., in accordance with SAE AS 22759/11 Wire Type J: high-strength silver-coated copper alloy wire, crosslinked modified ETFE insulation, 600 volts rms, 200° c., In accordance with SAE AS 22759/33
Pigtail Wire, Uninsulated
Wire Finish Code 3: solid copper wire in accordance with A-A-59551, gold-plated, solder dipped in 60/40 tin-lead Wire Finish Code 4: solid copper wire in accordance with A-A-59551, gold-plated
N P
Aluminum Alloy 6061 In Accordance With SAE AMS-QQ-A-250/11: Plating code 1: cadmium with yellow chromate conversion coating in accordance with SAE-AMS-QQ-P-416, Type II, Class 3 Plating code 2: electroless nickel in accordance with ASTM B733 Plating code 4: black anodize in accordance with MIL-A-8625 Type II Class 2 Plating code 5: gold plated in accordance with ASTM B488 over electroless nickel in accordance with ASTM B733-90. Plating code 6: chem film in accordance with MIL-C-5541 Class 3 Plating code 33: nickel-ptfe in accordance with M83513.
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-10 E-Mail:
[email protected]
Introduction
Micro-D Specifications
Micro-D Performance Specifications
A
1
SCOPE
1.1
Scope. This specification covers performance requirements for Glenair Micro-D connectors manufactured in accordance with MIL-DTL-83513.
1.2
Description. MWDL plastic and MWDM metal shell Micro-D connectors on .050 inch (1.27 mm) centers, with TwistPin contacts.
2
ORDER OF PRECEDENCE
2.1
Order of precedence. In the event of a conflict between the requirements of this specification and the references cited herein, this document takes precedence.The requirements set forth in customer specifications and Glenair detail drawings shall take precedence over this document.
3
REQUIREMENTS
3.1
Electrical Performance Requirements.
3.1.1
Insulation resistance. 5,000 megohms minimum between any pair of contacts and any contact and the shell when tested in accordance with EIA-364 Procedure 21, which specifies 500 volts DC.
3.1.2
Dielectric withstanding voltage.
3.1.2.1
Dielectric withstanding voltage (sea level). 600 volts ac, rms 60 Hz. Connectors shall show no evidence of breakdown or flashover when subjected to the DWV test of EIA-364 Procedure 20.
J
3.1.2.2
Dielectric withstanding voltage (70,000 feet). 150 volts ac, rms 60 Hz. Connectors shall show no evidence of breakdown or flashover when subjected to the DWV test of EIA-364 Procedure 20.
K
3.1.3
Contact resistance
3.1.3.1
Contact resistance (M83513 Group C qualification). The voltage drop of a mated pair of contacts attached to wires shall not exceed the values shown when tested in accordance with MIL-DTL-83513F Paragraph 4.5.8, using 2.5 amps test current.
C D E F G H
L M
Wire M22759/11-26 M22759/33-26
Voltage Drop (mV) 65 Maximum 75 Maximum
N
A-A-59551 25 gage
60 Maximum
P
3.1.3.2
Contact resistance (lot acceptance testing). The voltage drop across a mated pair of contacts shall not exceed 8 millivolts when tested in accordance with EIA-364-06, using a test current of one ampere ± 2%. If the connector under test is wired, the calculated resistance across the contacts shall not exceed 8 milliohms when the maximum specified wire resistance per foot is subtracted from the total resistance.
3.1.4
Low signal level contact resistance. When tested with a micro-ohmeter using a test current of 100 milliamperes maximum and 20 millivolts open circuit maximum, the resistance of a mated pair of contacts shall be 32
© 2013 Glenair, Inc.
B
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-11 E-Mail:
[email protected]
Q INDEX
Introduction
Micro-D Specifications
Micro-D Performance Specifications
A
milliohms maximum. Test procedure shall be in accordance with EIA-364-23.
B
3.1.5
C
Contact current capability. Contacts shall be capable of carrying 3.0 amperes in continuous duty operation from -55° C. to +150° C. when tested in accordance with EIA-364-70.
3.1.6
Shell-to-shell conductivity. A mated pair of nickel-plated metal shell Micro-D connectors fitted with an optional grounding spring on the plug shell mating face, shall not exceed 10 millivolts maximum voltage drop when tested in accordance with EIA-364-83.
3.1.7
Shielding effectiveness. A mated pair of metal shell Micro-D connectors fitted with an optional grounding spring on the plug shell mating face shall meet a requirement of 65 dB minimum attenuation when tested in accordance with EIA-364-66.
3.1.8
Magnetic permeability. Magnetic permeability, when tested in accordance with EIA-364-54, shall not exceed 2 mu.
3.2
Mechanical Requirements
3.2.1
Contact engaging and separation force. Maximum engaging force shall be 6.0 ounces when tested in accordance with EIA-364-37, except with a .0221 ± .0001 diameter sleeve with a 6-10 microfinish. Minimum separation force shall be 0.5 ounces when tested in accordance with EIA-364-37, except with a .0230 ± .0001 diameter sleeve with a 6-10 microfinish.
3.2.2
Connector mating and unmating force. The maximum mating and unmating force shall not exceed a value equal to 10 ounces times the number of contacts, when tested per EIA-364-13. Mate connectors three times before initial measurements are taken.
K
3.2.3
Contact retention. Contacts, when tested in accordance with EIA-364-29, shall withstand a 5 pound axial load for a minimum of 5 seconds, with a maximum allowable displacement of .005 inch.
L
3.2.4
Crimp tensile strength. Wire shall not break or pull out of crimp joints at less than the specified force when tested in accordance with EIA-364-08.
D E F G H J
M
Wire M22759/11 M22759/11 M22759/11 M22759/33 M22759/33 M22759/33 M22759/33
N P Q INDEX
Gage 24 26 28 24 26 28 30
Force in Pounds 8 5 4 12 10 6 4
3.2.5
Insert retention. Inserts shall not be dislodged or moved from their original position when subjected to an axial load of 50 pounds per square inch when tested in accordance with EIA-364-35
3.2.6
Resistance to soldering heat. Connectors with solder cup contacts shall not be damaged following soldering with a 360° C. solder iron for at least 4 seconds in accordance with EIA-364-56 Procedure 1. Connectors with printed circuit board terminations shall withstand immersion in a solder bath for 9-11 seconds at 260° C. when
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-12 E-Mail:
[email protected]
Introduction
Micro-D Specifications
Micro-D Performance Specifications
A
tested in accordance with EIA-364-56 Procedure 3 Test Condition B. Connectors, after cooling, shall not exhibit damage or warpage when examined at 10X magnification. .
B
3.2.7
Solderability. Solder cup and printed circuit terminals shall meet the solderability requirements of MIL-STD-202 Method 208.
3.2.8
Durability. Micro-D connectors shall be capable of 500 cycles of mating with no damage or degradation to electrical performance. Engaging and separation force and mating forces shall not exceed the requirements of 3.2.1 and 3.2.2.
D
3.3
Environmental Requirements
3.3.1
Salt spray (corrosion). Connectors shall show no exposure of base metal due to corrosion when subjected to the salt spray test of EIA-364-26. In addition, connectors shall meet contact resistane, lw circuit level contact resistance and mating force requirements.
E
Shell material, finish (code) Aluminum, cadmium plating (01) Aluminum, electroless nickel plating (02) Aluminum, black anodize (04) Aluminum, chem film (06) Aluminum, gold (05) Stainless steel, passivated (03) Nickel, PTFE (33)
3.3.2 3.3.3
EIA-364-26 test condition A B B B B D T
Duration (hours) 96 (48 for M83513) 48 48 48 48 1000 (48 for M83513) 500 (48 for M83513)
Fluid immersion. Connectors shall meet mating force requirements following 20 hours immersion in synthetic lubricating oil and 1 hour immersion in coolanol 25, when tested in accordance with MIL-DTL-83513F paragraph 4.5.18. Thermal vacuum outgassing. The assembled connector mass excluding metallic parts shall not exceed 1.0% total mass loss (TML) or 0.1% total volatile condensible materials (CVCM) when tested in accordance with ASTM E595. NOTE: the interfacial seal on metal shell MWDM receptacle connectors slightly exceeds the allowable CVCM unless it is specially processed. This is acceptable per MIL-DTL-83513 but may not be permissible for specific space programs.
C
F G H J K L M N P Q INDEX
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-13 E-Mail:
[email protected]
Introduction
Micro-D Specifications
Micro-D Performance Specifications
A
Outgassing properties of Micro-D conponents
B
Component
C
Thermoplastic Insulators and, PCB Trays
D E F
Material Liquid Crystal Polymer or Polyphenyl Sulfide
Brand Name
%Toatal Mass Loss (TML)
%Collected Volatile Condensable material (CVCM)
Test Report
Vectra® C-130
0.03
0.00
NASA Test #GSC174 78
Potting Compound Interfacial Seal “as received”
Epoxy Fluorosilicone
Hysol C9-4215 (none)
0.48 0.99
0.01 0.13
Glenair Test Glenair Test
Interfacial Seal with Oven Bakeout 8 hrs. 400° F.
Fluorosilicone
(none)
0.03
0.01
Glenair Test
Interfacial Seal with Thermal Vacuum Bakeout24 hrs. 125° C.
Fluorosilicone
(none)
0.08
0.02
Glenair Test
Tefzel®
Tefzel®
0.22
0.01
NASA Test #GSC19998
Wire
G
3.3.4
Thermal shock. Unmated connectors shall withstand 5 cycles of thermal shock with a minimum temperature of -65° C. and a maximum temperature of 150° C. when tested in accordance with EIA-364-32, Condition IV. Connectors shall not exhibit any detrimental damage or degradation of electrical performance.
H
3.3.5
Humidity
J K L M
3.3.5.1 Humidity, MWDM connectors with interfacial seals. Wired, mated connectors shall be subjected to humidity conditioning in accordance with EIA-364-31, Test Condition IV. After a minimum of 3 hours of step 7a of the final cycle, and while the connectors are still subjected to high humidity, the insulation resistance shall be measured when the chamber temperature reaches 20° ± 5° C. Insulation resistance shall not be less than 100 megohms, and connectors shall pass a DWV test of 360 volts (rms 60 hertz ac). 3.3.5.2 Humidity, MWDL plastic connectors without interfacial seals. Wired, mated connectors shall be subjected to humidity conditioning in accordance with EIA-364-31, Test Condition IV. On completion of step 6 of the final cycle, connectors shall be removed from the chamber, unmated and surface moisture removed. Connectors shall meet 1 megohm minimum and shall pass a DWV test of 100 volts (rms 60 hertz ac). 3.3.6
Vibration (sine). Connectors, when mated, wired in series and fixtured in accordance with MIL-DTL-83513F, shall not exhibit any discontinuity longer than 1 microsecond when tested in accordance with EIA-364-28 Test Condition IV, which specifies 12 hour duration, 10 Hz to 2000 Hz, and amplitude of 20 gn peak. Connectors shall not be damaged and no loosening of parts shall occur.
3.3.7
Shock. Connectors, when mated, wired in series and fixtured in accordance with MIL-DTL-83513F, shall not exhibit any discontinuity longer than 1 microsecond when tested in accordance with EIA-364-27, Test Condition E, which specifies an amplitude of 50 g peak. Connectors shall not be damaged and no loosening of parts shall occur.
3.3.8
Marking Permanency. Connector marking shall meet the requirements of MIL-STD-202 Method 215.
3.3.9
Fungus resistance. Connector materials shall meet the requirements of MIL-STD-810 Method 508.5.
N P Q INDEX
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-14 E-Mail:
[email protected]
Introduction
Micro-D Weights
Micro-D Metal Shell Weights In Grams1 Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 75P 75S 100P 100S 130P 130S
Solder Cup 1.7 1.7 2.3 2.2 3.0 2.6 3.3 3.0 3.9 3.6 4.4 4.1 5.1 4.8 5.0 4.7 5.7 5.4 6.2 5.9 7.4 7.1 9.1 8.2 13.0 11.8
Pigtail2 1.6 1.6 2.2 2.1 2.9 2.5 3.2 2.9 3.8 3.5 4.2 3.9 4.9 4.7 4.8 4.4 5.5 5.3 6.0 5.8 7.1 6.9 8.6 7.9 12.4 11.4
PCB “CBR” 3.9 3.9 4.8 4.7 5.6 5.4 6.1 6.0 7.6 7.5 8.4 8.4 11.0 10.9 10.9 10.8 13.4 13.2 14.0 13.5 17.3 17.1 26.6 26.4 34.2 33.9
PCB “BR” 5.9 5.9 6.8 6.7 7.7 7.6 8.3 8.2 9.5 9.4 11.1 11.0 12.7 12.8 12.5 12.4 13.6 13.4 14.1 13.9 19.5 19.3 27.5 27.1 37.0 36.5
PCB “BS” 4.1 4.1 4.7 4.7 5.7 5.6 5.9 6.1 7.2 7.3 8.5 8.3 9.6 9.5 9.5 9.4 10.6 10.5 11.1 11.0 14.7 14.6 25.4 24.8 32.6 32.1
PCB “CBS” 3.1 3.1 3.3 3.4 4.1 4.8 5.3 5.5 6.5 6.6 7.7 7.5 8.6 8.6 8.5 8.5 9.5 9.4 10.0 9.9 12.6 12.5 22.9 22.3 29.4 28.9
1. Nominal weight shown. Add 10% for maximum weight. 2. Weight is connector only. See table below for wire weight calculation.
Stainless Steel Micro-D Weight Adders Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 75P 75S 100P 100S 130P 130S
Stainless Steel Adder in Grams 1.9 2.0 2.4 2.4 2.9 2.8 3.2 2.9 3.4 3.2 3.6 4.1 4.0 3.8 6.2 6.0 7.1 6.8 7.3 7.0 7.7 7.4 8.3 8.0 11.8 11.5
© 2013 Glenair, Inc.
How To Calculate Weights for Different Wire Types and Lengths Wire Type
Wire Gage (AWG)
M22759/11 M22759/11 M22759/11 M22759/33 M22759/33 M22759/33 M22759/33
24 26 28 24 26 28 30
Maximum Wire Weight Per Inch in Grams .098 .072 .052 .076 .053 .034 .025
EXAMPLE CALCULATION: MWDM2L-37P-6K7-54B (54 inches of M22759/11 #26 gage wire) 1. Find the connector weight in the “Pigtail” column above............................................................. 4.2 g. 2. Find the wire weight in grams per inch.....................................................................................0.072 g./in. 3. Multiply the # of conductors times length and weight 37 wires x 54 inches x .072 g./in. =........................................................................................................144 g. 4. Add the connector weight to the wire weight.............................................................................. 148.2 g.
B C D E F G H J K L M N P Q
1. Nominal weight shown. Add 10% for maximum weight. 2. Weight includes 18 inches of M22759/11-26 insulated #26 AWG copper wire.
High Performance Micro-D Connectors and Cables
A
INDEX U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-15 E-Mail:
[email protected]
Introduction
Micro-D Contact Arrangements
Face View Pin Connector – Micro-D Contact Arrangements
A B
1
2
6
C
3
7
4
8
5
9
1
2
3
4 5
6 7 8
1
9 10 11 12 13 14 15
9 pin
2
3
4 5
6 7 8
9 10 11
12 13 14 15 16 17 18 19 20 21
15 pin
21 pin
3
4 5
6 7 8
9 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 1
E
2
3
4 5
6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
1
2
3
4 5
6 7 8
9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
31 pin
F H
2
25 pin
D
G
1
1
2 3
4
5 6
7 8
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
37 pin
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
1
2 3
4
51 pin
5 6
7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67
67 pin
51 pin (special 2 row)
J 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
K L M
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
69 pin
1
2 3
4
5 6
7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
75 pin
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2728 29 30 31 32 33
49 50 51 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 41
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
99 100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130
N P
100 pin
130 pin
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-16 E-Mail:
[email protected]
Introduction
Micro-D Contact Arrangements
Face View Socket Connector – Micro-D Contact Arrangements 5
4
9
3
8
2
7
1
8
6
7
6
5
4
3
2
1
11 10 9
15 14 13 12 11 10 9
9 socket
8
7
6
5
4
3
2
1
13 12 11 10 9
21 20 19 18 17 16 15 14 13 12
15 socket
8
7
6
5
4
3
2
A B
1
25 24 23 22 21 20 19 18 17 16 15 14
21 socket
C
25 socket
D
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 16 15 14 13 12 11 10 9
8
7
6
5
4
3
2
19 18 17 16 15 14 13 12 11 10 9
1
8
7
6
5
3
2
37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
37 socket
31 socket
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
4
8
7
6
5
4
3
2
E
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36
F
51 socket
34 33 32 3 1 30 29 28 2 7 26 2 5 24 2 3 22 2 1 20 1 9 18 1 7 16 1 5 14 13 12 1 1 10 9
1
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27
8
7
6
5
4
3
2
1
67 6 6 65 6 4 63 6 2 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 3 8 37 3 6 35
51 socket (special 2 row)
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
1
67 socket
8
7
6
5
4
3
2
1
47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27
69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52
75 socket
69 socket
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
51 50 41 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27
65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52
98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76
130129128127126125 124 123122121 120119 118 117 116 115 114 113 112 111 110109 108107 106105104103102 101 100 99
100 socket
130 socket
G H J K L M N P Q INDEX
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-17 E-Mail:
[email protected]
Introduction
Micro-D Panel Cutouts
Recommended Micro-D Panel Cutouts
A B
A
A
B
B
C D
G H J K L M N
4 x R .062 (1.6)
ØC
4 x R .062 (1.6)
ØF
Front Panel Mounting
E F
E
D
Rear Panel Mounting
Plastic Shell MWDL Connectors (M83513/06 Thru /09) A Layout 9 15 21 25 31 37 51
In .
B
C
D
E
mm. ± 0.08
In .
mm.
In .
± .003
± .002
± 0.05
± .002
mm. ± 0.05
± .002
In .
mm. ± 0.05
.565 .715 .865 .965 1.115 1.265 1.215
14.35 18.16 21.97 24.51 28.32 32.13 30.86
.410 .560 .710 .810 .960 1.110 1.060
10.41 14.22 18.03 20.57 24.38 28.19 26.92
.091 .091 .091 .091 .091 .091 .091
2.31 2.31 2.31 2.31 2.31 2.31 2.31
.174 .174 .174 .174 .174 .174 .217
4.42 4.42 4.42 4.42 4.42 4.42 5.51
F
In . + .005 - .000 .219 .219 .219 .219 .219 .219 .261
mm. + 0.13 - 0.00 5.56 5.56 5.56 5.56 5.56 5.56 5.56
In . ± .002
mm. ± 0.05
.126 .126 .126 .126 .126 .126 .126
3.20 3.20 3.20 3.20 3.20 3.20 3.20
Metal Shell MWDM Connectors A Layout 9 15 21 25 31 37 51 51-2 67 69 75 100 130
In . ± .003 .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.705 1.800 2.150
B mm. ± 0.08 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 43.31 45.72 54.61
In . ± .002 .410 .560 .710 .810 .960 1.110 1.060 1.460 1.858 1.360 1.460 1.455 1.799
C mm. ± 0.05 10.41 14.22 18.03 20.57 24.38 28.19 26.92 37.08 47.19 34.54 37.08 36.96 45.69
In . ± .002 .091 .091 .091 .091 .091 .091 .091 .091 .091 .091 .120 .120 .120
D mm. ± 0.05 2.31 2.31 2.31 2.31 2.31 2.31 2.31 2.31 2.31 2.31 3.05 3.05 3.05
In . ± .002 .277 .277 .277 .277 .277 .277 .317 .277 .277 .317 .317 .363 .363
E mm. ± 0.05 7.04 7.04 7.04 7.04 7.04 7.04 8.05 7.04 7.04 8.05 8.05 9.22 9.22
In . ± .005 .256 .256 .256 .256 .256 .256 .300 .256 .256 .300 .300 .338 .338
F mm. ± 0.13 6.50 6.50 6.50 6.50 6.50 6.50 7.62 6.50 6.50 7.62 7.62 10.31 10.31
In . ± .002 .126 .126 .126 .126 .126 .126 .126 .126 .126 .126 .147 .147 .147
mm. ± 0.05 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.79 3.73 3.73
a Recommended Mating Dimension
P Q
.195/.216 (5.08 ± 0.127)
Metric dimensions (mm) are indicated in parentheses.
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-18 E-Mail:
[email protected]
Introduction
MIL-STD-681 Color Code Chart
MIL-STD-681 Color Code Chart for Micro-D Connectors PIN NO.
MIL-STD-681 NO NUMBER
Base Color
First Stripe
PIN NO.
MIL-STD-681 NUMBER.
Base Color
First Stripe
1
0
2
1
BLK
51
957
WHT
GRN
VIO
BRN
52
958
WHT
GRN
GRY
3
2
4
3
RED
53
967
WHT
BLU
VIO
ORN
54
968
WHT
BLU
GRY
5
4
YEL
55
978
WHT
VIO
GRY
6
5
GRN
56
9012
WHT
BLK
BRN
RED
7
6
BLU
57
9013
WHT
BLK
BRN
ORN
8
7
VIO
58
9014
WHT
BLK
BRN
YEL
9
8
GRY
59
9015
WHT
BLK
BRN
GRN
10
9
WHT
11
90
WHT
BLK
Second Stripe
Second Stripe
Third Stripe
B
60
9016
WHT
BLK
BRN
BLU
61
9017
WHT
BLK
BRN
VIO
12
91
WHT
BRN
62
9018
WHT
BLK
BRN
GRY
13
92
WHT
RED
63
9023
WHT
BLK
RED
ORN
14
93
WHT
ORN
64
9024
WHT
BLK
RED
YEL
15
94
WHT
YEL
65
9025
WHT
BLK
RED
GRN
16
95
WHT
GRN
66
9026
WHT
BLK
RED
BLU
17
96
WHT
BLU
67
9027
WHT
BLK
RED
VIO GRY
18
97
WHT
VIO
68
9028
WHT
BLK
RED
19
98
WHT
GRY
69
9034
WHT
BLK
ORN
YEL
20
901
WHT
BLK
BRN
70
9035
WHT
BLK
ORN
GRN
21
902
WHT
BLK
RED
71
9036
WHT
BLK
ORN
BLU
22
903
WHT
BLK
ORN
72
9037
WHT
BLK
ORN
VIO
23
904
WHT
BLK
YEL
73
9038
WHT
BLK
ORN
GRY
24
905
WHT
BLK
GRN
74
9045
WHT
BLK
YEL
GRN BLU
25
906
WHT
BLK
BLU
75
9046
WHT
BLK
YEL
26
907
WHT
BLK
VIO
76
9047
WHT
BLK
YEL
VIO
27
908
WHT
BLK
GRY
77
9048
WHT
BLK
YEL
GRY BLU
28
912
WHT
BRN
RED
78
9056
WHT
BLK
GRN
29
913
WHT
BRN
ORN
79
9057
WHT
BLK
GRN
VIO
30
914
WHT
BRN
YEL
80
9058
WHT
BLK
GRN
GRY
31
915
WHT
BRN
GRN
81
9067
WHT
BLK
BLU
VIO
32
916
WHT
BRN
BLU
82
9068
WHT
BLK
BLU
GRY
33
917
WHT
BRN
VIO
83
9078
WHT
BLK
VIO
GRY
34
918
WHT
BRN
GRY
84
9123
WHT
BRN
RED
ORN
35
923
WHT
RED
ORN
85
9124
WHT
BRN
RED
YEL
36
924
WHT
RED
YEL
86
9125
WHT
BRN
RED
GRN
37
925
WHT
RED
GRN
87
9126
WHT
BRN
RED
BLU
38
926
WHT
RED
BLU
88
9127
WHT
BRN
RED
VIO GRY
39
927
WHT
RED
VIO
89
9128
WHT
BRN
RED
40
928
WHT
RED
GRY
90
9134
WHT
BRN
ORN
YEL
41
934
WHT
ORN
YEL
91
9135
WHT
BRN
ORN
GRN BLU
42
935
WHT
ORN
GRN
92
9136
WHT
BRN
ORN
43
936
WHT
ORN
BLU
93
9137
WHT
BRN
ORN
VIO
44
937
WHT
ORN
VIO
94
9138
WHT
BRN
ORN
GRY
45
938
WHT
ORN
GRY
95
9145
WHT
BRN
YEL
GRN
46
945
WHT
YEL
GRN
96
9146
WHT
BRN
YEL
BLU
47
946
WHT
YEL
BLU
97
9147
WHT
BRN
YEL
VIO
48
947
WHT
YEL
VIO
98
9148
WHT
BRN
YEL
GRY
49
948
WHT
YEL
GRY
99
9156
WHT
BRN
GRN
BLU
50
956
WHT
GRN
BLU
100
9157
WHT
BRN
GRN
VIO
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-19 E-Mail:
[email protected]
C D E F G H J K L M N P Q INDEX
Introduction
A B C D E F
Reference Data
Table 3: Standard Wire Specifications Wire Code
E
J
K
Specification
NEMA HP3-EXB
M22759/33
Insulation
Extruded PTFE
Extruded cross-linked modified ETFE
Extruded PTFE
M22759/11
Conductor
Silver-coated copper
Silver-coated high-strength copper alloy
Silver-coated copper
G H J
Wire Code
J
N Q INDEX
-65° to +200°C
-65° to +200°C
600 volts RMS
600 volts RMS
600 volts RMS
AWG
Strands
Max. Conductor Diameter (Inches)
DC Resistance Ohms/1000 Ft.
Max. Finished Wire Dia.
#24
7/32
.025
24.5
.048
#26
7/34
.020
39.7
.043
#28
7/36
.016
63.6
.039
#30
7/38
.013
100
.036
#24
19/36
.025
28.4
.037
#26
19/38
.020
44.8
.034
#28
7/36
.016
74.4
.029
#30
7/38
.012
117.4
.026
#24
19/36
.025
24.3
.045
#26
19/38
.020
38.4
.040
#28
7/36
.015
63.8
.035
Color Code
Wire Insulation Color
1
White
2
Yellow
5
White with MIL-STD-681 color stripes
7
10 Color Repeat
1
White
2
Yellow
5
White with MIL-STD-681 color stripes
7
10 Color Repeat
1
White
not available
2
Yellow
not available
5
White with MIL-STD-681 color stripes
7
10 Color Repeat
#24 AWG
#26 AWG
#28AWG
#30 AWG
not available
not available
not available
not available
E
L
P
-65° to +200°C
Voltage Rating
Table 4: Stocked Wire Sizes and Colors
K M
Operating Temp.
K
not available
not available not available
= Stocked wire. = Stocked wire through 51 colors only. Connectors with more than 51 contacts are not available with striped wire. 10 color repeating is the recommended alternate.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-20 E-Mail:
[email protected]
Introduction
RoHS Compliance Information
TwistPin Connectors and RoHS Compliance
A
European Union Directive 2002/95/EC on Restriction of the use of certain Hazardous Substances (“RoHS”) states that certain types of equipment (primarily consumer electronic products such as personal computers) shall not contain lead, mercury, cadmium, hexavalent chromium, PBB’s or PBDE’s. For the record, Glenair does not produce any OEM products of this type. Furthermore, our interconnect components are either free of the substances RoHS controls, or specifically intended for use in military-aerospace applications that are exempt. Makers of consumer products should refer to the following guidelines to insure Glenair interconnect components are correctly specified when used in in RoHS regulated electronic equipment. Are Micro-D Connectors RoHS compliant? The products in this catalog can be ordered with various plating finishes. Some of these finishes such as cadmium and chem film, along with solder-dipping, do not comply with the RoHS directive. Why doesn’t Glenair eliminate non-RoHS products? Glenair products are typically used in defense and aerospace equipment exempt from RoHS requirements. Glenair will continue to offer cadmium and chromate finishes in accordance with DoD and aerospace specifications. Our part numbers contain a broad range of plating finish ordering codes. Customers can easily specify RoHS compliant finishes if desired.
Products that do not comply with RoHS regulations:
D E F
1
1
Specify electroless nickel plating on the connector shell. Or, choose stainless steel shells for maximum corrosion protection and RoHS compliance.
G
2
2
H
Cadmium platingis available on metal shell connectors in this catalog. Note that cadmium plating does not currently comply with RoHS rules. Chem film is available on metal shell connectors.This coating contains hexavalent chromium which does not currently comply with RoHS rules.
3
Tin-lead solder dipped printed circuit board tails.Board mount M83513 Micro-D’s and other products are normally solder dipped in 63% tin 37% lead molton solder. RoHS compliance for consumer products requires elimination of solder coatings containing lead.
Use Mod Code 513 on Micro-D board mount connectors. Board mount Micro-D’s and other products are normally solder dipped in 63% tin 37% lead molton solder. Any solder-dipped part can be supplied with RoHS compliant gold-plating instead simply by adding Mod Code 513 as a suffix to the standard part number.
Problem
Solution
RoHS Compliant Part Number
Plating code 1 specifies cadmium plating.
Change to electroless nickel plating (code 2).
MWDM2L-37PSB
MWDM2L-25SCBRP-.110
CBR style PCB connectors are solderdipped in tin-lead.
Add Mod Code 513 to change the PC tail finish to gold plating.
MWDM2L-25SCBRP-.110-513
MWDM6L-9S-6K7-18L
Plating code 6 specifies chem film.
Change to electroless nickel plating (code 2).
MWDM2L-9S-6K7-18L
M83513/03-E07C
Cadmium plated shell and solderdipped contacts.
Change to nickel plating and gold contacts
M83513/03-E05N
High Performance Micro-D Connectors and Cables
J K L M
MWDM1L-37PSB
© 2013 Glenair, Inc.
C
RoHS compliance made easy
Micro-D ROHS Compliance Examples Part Number
B
U.S. CAGE Code 06324
N P Q INDEX
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-21 E-Mail:
[email protected]
Introduction
A B C D E F G H
RoHS Compliance Information
Micro-D Connector Plating Codes: ROHS Compliance Micro-D Plating Code
Plating Type
RoHS Compliance
1, A
Cadmium with yellow chromate conversion coating over electroless nickel
No
2, B
Electroless nickel
First choice for RoHS compliance. Good corrosion resistance, excellent conductivity, M83513 approved, always in stock.
3, F
Stainless steel shell, passivated
Higher cost but unsurpassed corrosion resistance, not conductive enough for typical EMI needs. Build-to-order.
4, D
Black anodize over aluminum
Economical, non-reflective, non-conductive. Build-to-order.
5, E
Gold over aluminum
Low volume, higher cost, excellent conductivity. Build-to-order.
6, C
Chem film
33, T
Nickel-PTFE
No
Notes Electroless nickel is the preferred alternate.
Electroless nickel is the preferred alternate. Glenair’s 500 Hour Grey™ meets the need for a cadmium replacement with excellent conductivity, wear resistance and corrosion protection, M83513 approved.
Micro-D Backshell Plating Codes: ROHS Compliance Plating Code
Plating Type
RoHS Compliance
Notes
J
J
Cadmium with yellow chromate conversion coating over electroless nickel
K
M
Electroless nickel
First choice for RoHS compliance. Good corrosion resistance, excellent conductivity, M83513 approved, always in stock.
L
C
Black anodize
Inexpensive, non-reflective, not suitable for EMI (poor conductivity), build-to-order.
M
Z2
Gold
Low volume, higher cost, excellent conductivity, build-to-order.
E
Chem film
MT
Nickel-PTFE
NF
Cadmium with olive drab chromate conversion coating over electroless nickel
N P
No
No
Electroless nickel is the preferred alternate.
Electroless nickel is the preferred alternate. Glenair’s 1000 Hour Grey™ meets the need for a cadmium replacement with excellent conductivity, wear resistance and corrosion protection, M83513 approved.
No
Electroless nickel is the preferred alternate.
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-22 E-Mail:
[email protected]
Micro-D Harness
Section B Micro-D Metal Shell Connectors for Harness Application Product Selection Guide GRPM Solder Cup Page B-2
A
GRPM Solder Cup Rear Panel Mount Connector
GRPM-Insulated Wire Page B-4 GRPM Uninsulated Wire Page B-6
MWDM Solder Cup Page B-8
GRPM Insulated Wire Rear Panel Mount Connector GRPM Uninsulated Wire Rear Panel Mount Connector
MWDM Insulated-Wire Connector
MWDM Back-To-Back Page B-12
MWDM Back-To-Back Unshielded Cable
GMDE Environmental Page B-23
K MWDM Uninsulated Wire Connector
L
GMDR Right Angle Exit with Insulated Wire Connector
M
GMDE Environmentally Sealed Connector
N P
GSWM SpaceWire Assembly
GMLM MasterLatch™ Insulated Wire B-29
GMLM MasterLatch™
High Performance Micro-D Connectors and Cables
H J
MWDM Shielded Cable Assemblies
GSWM SpaceWire Assembly Page B-27
© 2013 Glenair, Inc.
G
U.S. CAGE Code 06324
Q INDEX
GMDR Insulated Wire Page B-21
D F
MWDM Insulated Wire Page B-10
MWDM Uninsulated Wire Page B-19
C E
MWDM Solder Cup Connector
MWDM Shielded Cable Page B-14
B
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-1 E-Mail:
[email protected]
Micro-D Harness
Micro-D GRPM Solder Cup Terminated Rear Panel Mount Connectors with Wide Flange
Micro-D Solder Cup Termination – These connectors feature gold-plated TwistPin contacts for best performance. Use with #26 AWG or smaller wire. Specify nickel-plated shells or cadmium plated shells for best availability.
A B
Now Available with #24 AWG Contact – 24 AWG wire offers increased mechanical strength and lower voltage drop. Glenair Micro-D solder cup connectors are now compatible with 24 AWG stranded or solid wire. Specify “N” for 24 AWG pin contacts or “T” for 24 AWG socket contacts
C D E F
How To Order Solder Cup Rear Panel Mount Connector Sample Part Number
GRPM
Series
GRPM Glenair Rear Panel Micro
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-filled liquid crystal polymer PPS - 40% Glass-filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51-2, 51, 69, 75, 100, 130 (See Table I)
Contact Type
Standard Sizes P – Pin S – Socket
K
Termination Type
S - Solder Cup
Rear Panel Mount Hardware Option
B - No hardware R3 - .062 panel
L
O-Ring
C - Conductive N - Non Conductive (Nitrile)
G H J
M N P Q
2
L-
15
S
S
R3
N
Stainless Steel Shell 3 - Passivated
Size #24 Solder Cup N - Pin T - Socket R1 - .032 panel R2 - .047 panel R4 - .093 panel R5 - .125 panel
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator
Liquid Crystal Polymer (LCP) or Polyphenylene Sulffide (PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
R6 - .080 panel
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Notes:
INDEX
1. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification 2. Performance data per MIL-DTL-83513 3. Interface dimensions per MIL-DTL-83513 © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-2 E-Mail:
[email protected]
Micro-D Harness
Micro-D GRPM Solder Cup Terminated Rear Panel Mount Connectors with Wide Flange
Table I: Dimensions
H
A
K
B G
L
C
.110 Max. Size 9-37 And 51-100 Outer Rows .200 Max Size 51-100 Inner Rows
D
C Max
F
A
Pin 1
E
Skt 1
B
J
E Max
F
D
G B
C Max
Layout
in. mm. in. mm. ±.005 ±.13 ±.003 ±.08
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51-2P 51-2S 51P 51S 69P 69S 75P 75S 100P 100S 130P 130S
.960 .960 1.110 1.110 1.260 1.260 1.360 1.360 1.510 1.510 1.660 1.660 2.010 2.010 1.660 1.660 1.960 1.960 2.150 2.150 2.385 2.385 2.735 2.735
24.38 24.38 28.19 28.19 32.00 32.00 34.54 34.54 38.35 38.35 42.16 42.16 51.05 51.05 42.16 42.16 49.78 49.78 54.61 54.61 60.58 60.58 69.47 69.47
.565 .565 .715 .715 .865 .865 .965 0.965 1.115 1.115 1.265 1.265 1.615 1.615 1.215 1.215 1.515 1.515 1.705 1.705 1.800 1.800 2.150 2.150
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 41.02 41.02 30.86 30.86 38.48 38.48 43.31 43.31 45.72 45.72 54.61 54.61
D
in.
mm.
in. mm. ±.005 ±.13
.334 .400 .484 .550 .634 .700 .734 .800 .884 .950 1.034 1.100 1.384 1.450 .984 1.050 1.284 1.350 1.384 1.450 1.384 1.451 1.735 1.795
8.48 10.16 12.29 13.97 16.10 17.78 18.64 20.32 22.45 24.13 26.26 27.94 35.15 36.83 24.99 26.67 32.61 34.29 35.15 36.83 35.15 36.86 44.07 45.60
.480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 480 .525 .525 .525 .525 .525 .525 0.600 0.600 .600 .600
12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 13.34 13.34 13.34 13.34 13.34 13.34 15.24 15.24 15.24 15.24
E Max
F
G
H Max
in.
mm.
in. mm. in. mm. ±.003 ±.08 ±.005 ±.13
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 0.184 0.250 .224 .293 .224 .293 .224 .293 0.270 0.333 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 5.69 7.44 5.69 7.44 6.86 8.46 6.86 8.46
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
High Performance Micro-D Connectors and Cables
.529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541
13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74
J Max
K Ref
L Max
in.
mm.
in.
mm.
in.
mm.
in.
mm.
.790 .790 .940 .940 1.090 1.090 1.190 1.190 1.340 1.340 1.490 1.490 1.840 1.840 1.440 1.440 1.740 1.740 2.085 2.085 2.230 2.230 2.425 2.425
20.07 20.07 23.88 23.88 27.69 27.69 30.23 30.23 34.04 34.04 37.85 37.85 46.74 46.74 36.58 36.58 44.20 44.20 52.96 52.96 56.64 56.64 61.59 61.59
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .351 .351 .351 .351 .394 .394 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 8.92 8.92 8.92 8.92 10.01 10.01 10.01 10.01
.210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .280 .280 .300 .300 .340 .340
5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 7.11 7.11 7.65 7.65 8.64 8.64
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 0.416 0.429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-3 E-Mail:
[email protected]
H J K L M N P Q INDEX
A
Micro-D Harness
Micro-D GRPM Insulated-Wire Rear Panel Mount Connector with Wide Flange
Micro-D Pre-Wired Pigtails–These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. Specify nickelplated shells or cadmium plated shells for best availability. 100% tested and backpotted, ready for use.
B
Choose the Wire Type and Size To Fit Your Application–If on-hand availability is most important, choose #26 AWG Type K mil spec fluoropolymer wire or M22759/33 Type J for space applications. How To Order Insulated Wire Rear Panel Mount Connector Sample Part Number
GRPM
Series
GRPM Glenair Rear Panel Micro
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass-Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51-2, 51, 69, 75, 100, 130 (See Table I)
Contact Type
P – Pin S – Socket
Wire Gage
4 - #24 6 - #26 8 - #28 0 - #30 (ETFE) Wire Only
Stranded Wire Type
K – M22759/11 - 600 VRMS Fluoropolymer (TFE) J – M22759/33 - 600 VRMS Modified Cross-Linked Tefzel® E – NEMA HP3-EB - 600 VRMS (M16878/4)
Stranded Wire Color
1 - White
Stranded Wire Length
18 - 18 inches
Rear Panel Mount Hardware Option
B - No Hardware R3 - .062 panel
O-Ring
C - Conductive N - Non Conductive (Nitrile)
2 - Yellow
2
L
-15
P
-6
K
7
18
R3
N
Stainless Steel Shell 3 - Passivated
5 - Full Color
7 - 10 Color Repeat
R1 - .032 panel R2 - .047 panel R4 - .093 panel R5 - .125 panel
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator
Liquid Crystal Polymer (LCP) or Polyphenylene Sulffide (PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
R6 - .080 panel
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Notes:
1. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification 2. Performance data per MIL-DTL-83513 3. Interface dimensions per MIL-DTL-83513 © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-4 E-Mail:
[email protected]
Micro-D Harness
Micro-D GRPM Insulated-Wire Rear Panel Mount Connector with Wide Flange
Table I: Dimensions
Layout
B
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51-2P 51-2S 51P 51S 69P 69S 75P 75S 100P 100S 130P 130S
A
B
C Max
in. mm. in. mm. ±.005 ±.13 ±.003 ±.08 .960 .960 1.110 1.110 1.260 1.260 1.360 1.360 1.510 1.510 1.660 1.660 1.66 1.66 1.660 1.660 1.960 1.960 2.150 2.150 2.385 2.385 2.735 2.735
24.38 24.38 28.19 28.19 32.00 32.00 34.54 34.54 38.35 38.35 42.16 42.16 42.16 42.16 42.16 42.16 49.78 49.78 54.61 54.61 60.58 60.58 69.47 69.47
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.215 1.215 1.515 1.515 1.705 1.705 1.800 1.800 2.150 2.150
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 30.86 30.86 38.48 38.48 43.31 43.31 45.72 45.72 54.61 54.61
in. .334 .400 .484 .550 .634 .700 .734 .800 .884 .950 1.034 1.100 .984 1.05 .984 1.050 1.284 1.350 1.384 1.450 1.384 1.451 1.735 1.795
D
E Max
in. mm. mm. ±.005 ±.13 8.48 10.16 12.29 13.97 16.10 17.78 18.64 20.32 22.45 24.13 26.26 27.94 24.99 26.67 24.99 26.67 32.61 34.29 35.15 36.83 35.15 36.86 44.07 45.60
.480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .525 .525 .525 .525 .525 .525 .525 .525 .600 .600 .600 .600
12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 13.34 13.34 13.34 13.34 13.34 13.34 13.34 13.34 15.24 15.24 15.24 15.24
in. .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .224 .293 .224 .293 .224 .293 .270 .333 .270 .333
F
G
H Max
in. mm. in. mm. mm. ±.003 ±.08 ±.005 ±.13 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 5.69 7.44 5.69 7.44 5.69 7.44 6.86 8.46 6.86 8.46
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
High Performance Micro-D Connectors and Cables
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541
13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 3.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74
J Max
K Ref
in.
mm.
in.
mm.
in.
mm.
.790 .790 .940 .940 1.090 1.090 1.190 1.190 1.340 1.340 1.490 1.490 1.440 1.440 1.440 1.440 1.740 1.740 2.085 2.085 2.230 2.230 2.425 2.425
20.07 20.07 23.88 23.88 27.69 27.69 30.23 30.23 34.04 34.04 37.85 37.85 36.58 36.58 36.58 36.58 44.20 44.20 52.96 52.96 56.64 56.64 61.59 61.59
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .351 .351 .351 .351 .351 .351 .394 .394 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 8.92 8.92 8.92 8.92 8.92 8.92 10.01 10.01 10.01 10.01
.210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .210 .280 .280 .300 .300 .340 .340
5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 7.11 7.11 7.65 7.65 8.64 8.64
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-5 E-Mail:
[email protected]
Micro-D Harness
Micro-D GRPM Uninsulated Wire Rear Panel Mount Connector with Wide Flange
High Performance – These connectors meet the demanding requirements of MIL-DTL-83513. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance
B
How To Order Uninsulated Wire Rear Panel Mount Connector Sample Part Number
GRPM
2
Series
GRPM Glenair Rear Panel Micro
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass-Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51-2, 51, 69, 75, 100, 130 (See Table I)
Contact Type
P – Pin S – Socket
Wire Gage
4 - #24 (.020) 5 - #25 (.018) 6 - #26(.016)
Wire Type
C - Solid Copper
Termination Finish
3 - Solder Dipped 4 - Gold
Wire Length
.125, .250, .375, .500, .750, 1.000
Rear Panel Mount Hardware Option
B - No hardware R3 - .062 panel
O-Ring
C - Conductive N - Non Conductive (Nitrile)
Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
15
P-
4
C
4-
.250 R3
N
Stainless Steel Shell 3 - Passivated
R1 - .032 panel R4 - .093 panel
R2 - .047 panel R5 - .125 panel
Materials and Finishes Connector Shell
L-
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Liquid Crystal Polymer (LCP) or Polyphenylene Sulffide (PPS) Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
R6 - .080 panel
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Notes:
1. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification 2. Performance data per MIL-DTL-83513 3. Interface dimensions per MIL-DTL-83513 © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-6 E-Mail:
[email protected]
Micro-D Harness
Micro-D GRPM Uninsulated Wire Rear Panel Mount Connector with Wide Flange
Table I: Dimensions
B
A
B
C Max
Layout
in. mm. in. mm. ±.005 ±.13 ±.003 ±.08
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S
.960 0.960 1.110 1.110 1.260 1.260 1.360 1.360 1.510 1.510
D
E Max
in.
mm.
in. mm. ±.005 ±.13
.334 .400 .484 .550 .634 .700 .734 .800 .884 .950
8.48 10.16 12.29 13.97 16.10 17.78 18.64 20.32 22.45 24.13
.480 .480 .480 .480 .480 .480 .480 .480 .480 .480
37P 1.660 42.16 1.265 32.13 1.034 26.26 37S 51-2P 51-2S 51P 51S 69P 69S 75P 75S 100P 100S 130P 130S
1.660 2.010 2.010 1.660 1.660 1.960 1.960 2.150 2.150 2.385 2.385 2.735 2.735
24.38 24.38 28.19 28.19 32.00 32.00 34.54 34.54 38.35 38.35 42.16 51.05 51.05 42.16 42.16 49.78 49.78 54.61 54.61 60.58 60.58 69.47 69.47
0.565 0.565 0.715 0.715 0.865 0.865 0.965 0.965 1.115 1.115 1.265 1.615 1.615 1.215 1.215 1.515 1.515 1.705 1.705 1.800 1.800 2.150 2.150
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 41.02 41.02 30.86 30.86 38.48 38.48 43.31 43.31 45.72 45.72 54.61 54.61
1.100 1.384 1.450 0.984 1.050 1.284 1.350 1.384 1.450 1.384 1.451 1.735 1.795
27.94 35.15 36.83 24.99 26.67 32.61 34.29 35.15 36.83 35.15 36.86 44.07 45.60
F
G
H Max
in.
mm.
in. mm. in. mm. ±.003 ±.08 ±.005 ±.13
12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.529 .541 .529 .541 .529 .541 .529 .541 .529 .541
13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74
.480
12.19
.184
4.67
.183
4.65
.480 .480 .480 .525 .525 .525 .525 .525 .525 .600 .600 .600 .600
12.19 12.19 12.19 13.34 13.34 13.34 13.34 13.34 13.34 15.24 15.24 15.24 15.24
.250 .184 .250 .224 .293 .224 .293 .224 .293 .270 .333 .270 .333
6.35 4.67 6.35 5.69 7.44 5.69 7.44 5.69 7.44 6.86 8.46 6.86 8.46
.195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
High Performance Micro-D Connectors and Cables
J Max
K Ref
in.
mm.
in.
mm.
in.
mm.
.790 .790 .940 .940 1.090 1.090 1.190 1.190 1.340 1.340
20.07 20.07 23.88 23.88 27.69 27.69 30.23 30.23 34.04 34.04
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87
.210 .210 .210 .210 .210 .210 .210 .210 .210 .210
5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33 5.33
.529
13.44 1.490 37.85
.310
7.87
.210
5.33
.541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541 .529 .541
13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74 13.44 13.74
.310 .310 .310 .351 .351 .351 .351 .351 .351 .394 .394 .394 .394
7.87 7.87 7.87 8.92 8.92 8.92 8.92 8.92 8.92 10.01 10.01 10.01 10.01
.210 .210 .210 .210 .210 .210 .210 .280 .280 .300 .300 .340 .340
5.33 5.33 5.33 5.33 5.33 5.33 5.33 7.11 7.11 7.65 7.65 8.64 8.64
1.490 1.840 1.840 1.440 1.440 1.740 1.740 2.085 2.085 2.230 2.230 2.425 2.425
37.85 46.74 46.74 36.58 36.58 44.20 44.20 52.96 52.96 56.64 56.64 61.59 61.59
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-7 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Solder Cup Metal Shell Connectors Micro-D Solder Cup Termination–These connectors feature gold-plated TwistPin contacts for best performance. Use with #26 AWG or smaller wire. Specify nickel-plated shells or cadmium plated shells for best availability.
B
Now Available with #24 AWG Contacts–AWG 24 wire offers increased mechanical strength and lower voltage drop. Glenair Micro-D solder cup connectors are now compatible with 24 AWG stranded or solid wire. Specify “N” for 24 AWG pin contacts, or “T” for 24 AWG socket contacts. How To Order Solder Cup Connectors Sample Part Number
MWDM
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130 (See Table II)
Contact Type
Size #26 Solder Cup Contacts (Standard) P - Pin S - Socket
Termination Type
S - Solder Cup
Hardware
B, P, M, M1, S, S1, L, K, F, R, H (See Table I)
2
L-
37
S
S
B
Stainless Steel Shell 3 - Passivated
Size #24 Solder Cup Contacts N - Pin T - Socket
Table I: Mounting Hardware B
P
M
M1
S
S1
L
Thru-Hole
Jackpost
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
Hex Head Jackscrew NonRemovable
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
K
F
R
H
Slot Head Float Mount Float Mount Jackscrew For Front For Rear NonPanel Panel Removable Mounting Mounting Extended
U.S. CAGE Code 06324
Threaded Insert
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-8 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Solder Cup Metal Shell Connectors Table II: Dimensions A B C E
.110 (2.79) MAX
F G
D
9-69 CONTACTS: .096/.088 (2.43/2.23) DIA. 75-130 CONTACTS: .151/.145 (3.81/3.68) DIA. A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48
.093 ± .005 (2.36 ± 0.13)
H D Max.
E Max.
F
mm.
In.
mm.
In.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 45.31 46.99 32.61
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .184 .250 .184 .250 .228
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 4.67 6.35 4.67 6.35 5.79 7.52 5.79
.308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .310 .310 .310 .310 .351 .351 .351
7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.87 7.87 7.87 7.87 8.92
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183
8.92 8.91
.351 .394 .394 .394 .394
69S
1.735 44.07 1.515 38.48 1.350 34.29
.296
2.080
52.8
1.705
43.3
1.384
35.2
.228
75S
2.080
52.8
1.705
43.3
1.450
36.8
.296
100P
2.170 55.12 1.800 45.72 1.383 35.13
.270
7.52 6.86
100S 130P 130S
2.170 55.12 1.800 45.72 1.451 36.86 2.520 64.00 2.160 54.86 1.735 44.07 2.520 64.00 2.160 54.86 1.795 45.60
.333 .270 .333
8.46 6.86 8.46
© 2013 Glenair, Inc.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310
4.95
.429
34.29
.310
.183
4.6
.416
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350 1.350 1.440
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.83 36.83 36.83 36.83 34.29
.195
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 7.87
8.91
.195
5.0
.429
10.01
.183
4.65
.416
10.01 10.01 10.01
.195 .183 .195
4.95 4.65
.429 .416
4.95
.429
Performance Specifications 3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
.200 (5.08) MAX
G Max.
In. mm. mm. ± .003 ± 0.08
In.
75P
Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
B
J
36.58
.310
10.90 1.440 36.58 10.57 1.442 36.63
.310
.360
7.87 9.14
10.90 1.442 36.63 10.57 1.780 45.21 10.90 1.780 45.21
.360 .360 .360
9.14 9.14 9.14
Materials and Finishes Aluminum Alloy 6061 or Stainless Steel, 300 Series, Connector Shell passivated. See Ordering Info for Plating Options Insulator
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide(PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-9 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Insulated Wire Metal Shell Connectors Micro-D Insulated Wire Pigtails–These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. Specify nickel-plated shells or cadmium plated shells for best availability. 100% tested and backpotted, ready for use.
B
Choose the Wire Type and Size To Fit Your Application–If on-hand availability is most important, choose #26 AWG Type K mil spec Teflon® wire. Select M22759/33 Type J for space applications.
How To Order Insulated Wire Connector Sample Part Number
MWDM
2
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130 (See Table II)
Contact Type
P - Pin S - Socket
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J wire type only)
Wire Type
K – M22759/11 600 VRMS Teflon® (TFE)
L-
25
S-
4
K
7-
18
B
Stainless Steel Shell 3 - Passivated
E – NEMA HP3-EB 600 VRMS Type E M16878/4 (TFE)
J – M22759/33 600 VRMS Modified CrossLinked Tefzel® (ETFE)
Wire Color
1 – White 2 – Yellow 5 – Color-Coded Stripes Per MIL-STD-681 (up to 51 colors) 7 – Ten Color Repeating
Wire Length Inches
18 - Wire Length In Inches. “18” Specifies 18 Inches.
Hardware
B, P, M, M1, S, S1, L, K, F, R, H (See Table I)
Table I: Mounting Hardware B
P
M
M1
S
S1
Thru-Hole
Jackpost
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
© 2013 Glenair, Inc.
L
K
F
R
H
Hex Head Slot Head Float Mount Float Mount Jackscrew Jackscrew For Front For Rear NonNonPanel Panel Removable Removable Mounting Mounting Extended
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Threaded Insert
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-10 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Insulated Wire Metal Shell Connectors Table II: Dimensions A B C E
WIRE LENGTH 1.0/-0.0 (+.254/-0.0)
F G
D
9-69 CONTACTS: .096/.088 (2.43/2.23) DIA. 75-130 CONTACTS: .151/.145 (3.81/3.68) DIA. A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48
.093 ± .005 (2.36 ± 0.13)
H D Max.
E Max.
F
mm.
In.
mm.
In.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 45.31 46.99 32.61
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .184 .250 .184 .250 .228
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 4.67 6.35 4.67 6.35 5.79 7.52 5.79
.308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .310 .310 .310 .310 .351
7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.87 7.87 7.87 7.87 8.92
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183
69S
1.735 44.07 1.515 38.48 1.350 34.29
.296
2.080
52.8
1.705
43.3
1.384
35.2
.228
75S
2.080
52.8
1.705
43.3
1.450
36.8
.296
100P
2.170 55.12 1.800 45.72 1.383 35.13
100S 130P 130S
2.170 55.12 1.800 45.72 1.451 36.86 2.520 64.00 2.150 54.61 1.735 44.07 2.520 64.00 2.150 54.61 1.795 45.60
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65
.351
8.92
.195
0.351
8.92
.183
0.351
8.92
.195
.270
7.52 6.86
.394
10.01
.183
4.95 4.65
.333 .270 .333
8.46 6.86 8.46
.394 .394 .394
10.01 10.01 10.01
.195 .183 .195
4.95 4.65 4.95
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.83 36.83 36.83 36.83 34.29
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310
.429
10.90 1.350 34.29
.310
.416
10.6
1.440
36.6
.310
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 7.87
.429
10.9
1.440
36.6
.310
.416
10.57 1.442 36.63
.360
7.87 9.14
.429 .416 .429
10.90 1.442 36.63 10.57 1.780 45.21 10.90 1.780 45.21
.360 .360 .360
9.14 9.14 9.14
Materials and Finishes
Performance Specifications
© 2013 Glenair, Inc.
G Max.
In. mm. mm. ± .003 ± 0.08
In.
75P
Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
B
J
Aluminum Alloy 6061 or Stainless Steel, 300 Series, Connector Shell passivated. See Ordering Info for Plating Options Insulator
Liquid Crystal Polymer (LCP)/ Polyphenyl Sulfide(PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-11 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Back-To-Back Metal Shell Unshielded Cable Assembly
Save Time and Money With Back-To-Back Cables– these Micro-D connectors feature crimp wire terminations and epoxy encapsulation. The installed cost is lower than terminating solder cup connectors.
B
100% Certified– All back-to-back assemblies are 100% checked for continuity, resistance, voltage and insulation resistance. Hardware Note– If jackposts are required on one end and jackscrews on the other, use hardware designator “B” (no Hardware installed), and order hardware kits separately. How To Order Back-to-Back Cable Assembly Sample Part Number
MWDM
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130
Connector Type
GP – Pin (Plug) Connector Both Ends GS – Socket (Receptacle) Connector Both Ends CS – Pin Connector to Socket Connector
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J wire type only)
Wire Type
K – M22759/11 600 VRMS Fluoropolymer (TFE)
2
L-
25
GS-
4
K
7-
18
B
Stainless Steel Shell 3 - Passivated
E – NEMA HP3-EB 600 VRMS Type E M16878/4 (TFE)
J – M22759/33 600 VRMS Modified CrossLinked Tefzel® (ETFE)
Wire Color
1 – White 2 – Yellow 5 – Color-Coded Stripes Per MIL-STD-681 (up to 51 colors) 7 – Ten Color Repeating
Wire Length Inches
18 - Wire Length In Inches. “18” Specifies 18 Inches. (2” Min. for 2 row, 3” Min. for 3 row, 4” Min. for 4 row)
Hardware
B, P, M, M1, S, S1, L, K, F, R, H
Table I: Mounting Hardware B
P
M
M1
S
S1
Thru-Hole
Jackpost
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
© 2013 Glenair, Inc.
L
K
F
R
H
Hex Head Slot Head Float Mount Float Mount Jackscrew Jackscrew For Front For Rear NonNonPanel Panel Removable Removable Mounting Mounting Extended
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Threaded Insert
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-12 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Back-To-Back Metal Shell Unshielded Cable Assembly
Table II: Dimensions A B C E
WIRE LENGTH +1.0/-0.0 (+25.4/-0.0)
F
9-69 CONTACTS: .096/.088 (2.43/2.23) DIA. 75-130 CONTACTS: .151/.145 (3.81/3.68) DIA. A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P
B
G
D
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48
.093 ± .005 (2.36 ± 0.13)
H D Max.
E Max.
F
G Max.
In. mm. mm. ± .003 ± 0.08
In.
mm.
In.
mm.
In.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 45.31 46.99 32.61
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .184 .250 .184 .250 .228
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 4.67 6.35 4.67 6.35 5.79
.308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .310 .310 .310 .310 .351
7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.87 7.87 7.87 7.87 8.92
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183
J
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.83 36.83 36.83 36.83 34.29
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310
.429
10.90 1.350 34.29
.310
.416
10.6
1.440
36.6
.310
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 7.87
10.9
1.440
36.6
.310
69S
1.735 44.07 1.515 38.48 1.350 34.29
.296
7.52
.351
8.92
.195
75P
2.080
52.8
1.705
43.3
1.384
35.2
.228
5.8
.351
8.9
.183
75S
2.080
52.8
1.705
43.3
1.450
36.8
.296
7.5
.351
8.9
.195
100P
2.170 55.12 1.800 45.72 1.383 35.13
.270
6.86
.394
10.01
.183
4.95 4.65
.429
.416
10.57 1.442 36.63
.360
7.87 9.14
100S 130P 130S
2.170 55.12 1.800 45.72 1.451 36.86 2.520 64.00 2.160 54.86 1.735 44.07 2.520 64.00 2.160 54.86 1.795 45.60
.333 .270 .333
8.46 6.86 8.46
.394 .394 .394
10.01 10.01 10.01
.195 .183
4.95 4.65
.429 .416
.195
4.95
.429
10.90 1.442 36.63 10.57 1.780 45.21 10.90 1.780 45.21
.360 .360 .360
9.14 9.14 9.14
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force © 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator
Liquid Crystal Polymer (LCP)/ Polyphenyl Sulfide(PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-13 E-Mail:
[email protected]
Micro-D Harness
MWDM Micro-D Shielded Cable Assembly Single-Ended or Double-Ended–These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 100% tested and ready for use.
B
Now With Twisted Pairs–No need to create a procurement specification for Micro-D cables with twisted pairs. Glenair 177-740 cables are furnished with a full complement of white/blue twisted pair wires. Integral Shield Termination–The connector shell has a platform to accept Band-It shield termination bands. The cable shield braid is attached directly to the connector.
Save Labor, Reduce Weight and Improve EMI Shielding with Glenair’s Micro-D Shielded Cable Assemblies Aerospace electronics systems require higher and higher levels of protection from radiated emissions. Glenair’s fully shielded Micro-D cable assemblies meet this need. The cable shield is attached directly onto the onepiece connector shell and secured with a stainless steel Band-Master™ ATS clamp. These pre-wired, 100% tested assemblies meet the requirements of MIL-DTL-83513. An optional ground spring on the pin connector assures low shell-to-shell resistance. Available with a variety of wire types and shields, Micro-D shielded assemblies can be ordered in any length, either single-ended or “back-to-back”. Ground Spring and EMI Shielding Effectiveness A gold-plated stainless steel ground spring on the pin connector mating face offers substantial improvement in EMI protection. The graphs compare identical connectors tested with and without ground springs.
EMI Performance without Ground Spring
100 90 80 70 60 50 40 30 20 10 0 1.00E+03
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
SHIELDING EFFECTIVENESS (Db)
SHIELDING EFFECTIVENESS (Db)
EMI Performance with Ground Spring
100 90 80 70 60 50 40 30 20 10 0 1.00E+03
frequency (Hz)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
frequency (Hz)
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-14 E-Mail:
[email protected]
Micro-D Harness
MWDM Micro-D Shielded Cable Assembly
177-710 (Untwisted Wire) and 177-740 (Twisted Wire Pairs) How To Order Shielded Micro-D Cable Assemblies Sample Part Number
177-710
-2
-25
P
4
K
1
-18
M
Series
177-710 - Untwisted Wire 177-740 - Twisted Pair Wire
Shell Material and Finish
Aluminum Shell 1 - Cadmium
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130
Contact Type
P – Pin (Single End Plug) S – Socket (Single End Receptacle) GP – Double End Cable, Pin Connectors Both Ends GS – Double End Cable, Socket connectors Both Ends CS – Double End Cable, Pin and Socket
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J wire type only)
Wire Type
K – Fluoropolymer Wire Per MIL-W-22759/11 (Not available in #30 gage) J – Cross-Linked Tefzel® Wire Per MIL-W-22759/33
Wire Color
1 – White (177-710 only) or White/Blue Twisted Pairs (177-740 Only) 5 – Color-Coded Per MIL-STD-681 (177-710 only)(#24 and #26 gage only) White/Blue Twisted Pairs (177-740 only) 7 – Ten Color Repeating (177-710 only)
Overall Length (In.)
Example “18” = 18 inches
Mounting Hardware
B – No Mounting Hardware Installed F – Float Mount, for Front Panel L – Male Jackscrew, Allen Head, Non-Removable M – Male Jackscrew, Allen Head, Low Profile Mounting P – Female Jackpost R – Float Mount, for Rear Panel Mounting S – Male Jackscrew, Slot Head, Low Profile
Shield and Jacket Option
N – No Shield, No Jacket A – Braided Shield Installed (Nickel over Copper) C – Braided Shield Installed (Nickel over Copper) With E-CTFE Halar “Expando” Jacket (+150° C.) D – No Shield, With E-CTFE Halar “Expando” Jacket Installed (+150° C.) S – 100% Braided AmberStrand® Shield Installed T – 100% Braided AmberStrand® Shield Installed with E-CTFE Halar “Expando” Jacket (+150° C.) V – 75% Braided AmberStrand® Shield Installed Z – 75% Braided AmberStrand® Shield Installed with E-CTFE Halar “Expando” Jacket (+150° C.) W – ArmorLite™ Braided Microfiliment Stainless Steel Shield Installed X – ArmorLite™ Braided Microfiliment Stainless Steel Shield Installed with E-CTFE Halar “Expando” Jacket (+150° C)
Ground Spring Option*
N – No Ground Spring
2 - Electroless Nickel
A
G
B
5 - Gold
6 Inch (152 mm.) Minimum
G – Ground Spring Installed (Pin Connectors Only)
*Ground spring cannot be used with cadmium plating Table I: Mounting Hardware B
P
M
S
L
F
R
Thru-Hole, No Mounting Hardware
Female Jackpost
Hex Head Jackscrew
Slot Head Jackscrew
Hex Head Jackscrew Non- Removable
Float Mount for Front Panel Mounting
Float Mount for Rear Panel Mounting
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Rec. 090117
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-15 E-Mail:
[email protected]
Micro-D Harness
MWDM Micro-D Shielded Cable Assembly
177-710 (Untwisted Wire) and 177-740 (Twisted Wire Pairs) Materials and Finishes
Performance Specifications
B
Current Rating 3 AMP Dielectric Withstanding Voltage 600 VAC Sea Level Voltage 150 VAC 70,000 Feet Insulation Resistance 5000 Megohms Minimum Contact Resistance 8 Milliohms Maximum Low Level Contact Resistance 32 Milliohms Maximum Magnetic Permeability 2 µ Maximum Operating Temperature -55° C. to +150° C. Shock 50 g. Vibration 20 g. Outgassing Meets NASA Outgassing Requirements Mating Force (10 Ounces) X (# of Contacts) EMI Shielding Effectiveness 50 dB Attenuation, 100 MHz to 1000 MHz For additional performance requirements, please refer to MIL‑DTL‑83513
.645 (16.4)
.093 ± .005 (2.36 ± 0.13)
F
Connector Shell
Plating Code 1: Cadmium With Yellow Chromate Plating Code 2: Electroless Nickel, Plating Code 5: Gold
Insulator
Liquid Crystal Polymer (LCP)/Polyphenylene Sulfide (PPS)
Interfacial Seal
Fluorosilicone Rubber, Blue
Pin Contact
Copper Alloy With 50 Microinches Gold over Nickel Plating
Socket Contact
Copper Alloy With 50 Microinches Gold Over Nickel Plating
Shield Braid
#36 AWG Nickel-Coated Copper per ASTM B355 Class 4 OFHC 100% AmberStrand® EMI/RFI Conductive Composite Thermoplastic Braided Shielding 75% AmberStrand© Conductive Composite Thermoplastic EMI/RFI Shielding Blended with 25% NiCu EMI/RFI Braided Shielding ArmorLite™ Lightweight Stainless Steel EMI/RFI Shielding
Wire
Type K: per MIL-W-22759/11. Silver-Plated Copper Conductor, Extruded TFE fluoropolymer Insulation Type J: per MIL-W-22759/33. Silver-Plated .Copper Conductor, Extruded Crosslinked Tefzel® Insulation
Hardware
.300 Series Stainless Steel
Jacket
Type B: PET Expando Braided Jacket, +125° C. Type C: E-CTFE (EthyleneChlorotriflourethylene) Halar Expando Braided Jacket, +150° C.
Encapsulant
Epoxy Resin Hysol EE4215
A B C Wire Length E
(H) (K)
D (G) (J)
9-69 CONTACTS .096/.088 (2.43/2.23) DIA 75-130 CONTACTS .151/.145 (3.81/3.68)DIA
Table II: Dimensions Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 75P 75S 100P 100S 130P 130S
A Max. In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.080 2.080 2.160 2.160 2.520 2.520
19.94 19.94 23.7 23.7 27.56 27.56 30.10 30.10 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07 44.07 52.8 52.8 54.86 54.86 64.00 64.00
© 2013 Glenair, Inc.
In . ± .003 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.705 1.705 1.800 1.800 2.160 2.160
B
mm. ± 0.08 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48 38.48 43.3 43.3 45.72 45.72 54.86 54.86
C Max.
D Max.
E Max.
In.
mm.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284 1.350 1.384 1.450 1.383 1.451 1.735 1.795
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.97 24.97 26.70 35.15 36.83 45.31 46.99 32.61 34.29 35.15 36.83 35.13 36.86 45.59 45.59
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .184 .250 .184 .250 .228 .296 .224 .293 .270 .333 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 4.67 6.35 4.67 6.35 5.79 7.52 5.68 7.44 6.86 8.46 6.86 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .310 .310 .310 .310 .351 .351 .351 .351 .394 .394 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 7.87 7.87 7.87 7.87 8.92 8.92 8.91 8.91 10.01 10.01 10.00 10.00
F In . mm. ± .003 ± 0.08 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95
High Performance Micro-D Connectors and Cables
(G) In.
mm.
.340 .340 .490 .490 .640 .640 .740 .740 .890 .890 1.040 1.040 .990 .990 1.390 1.390 1.790 1.790 1.290 1.290 .416 .429 1.385 1.385 1.712 1.712
8.64 8.64 12.45 12.45 16.26 16.26 18.80 18.80 22.61 22.61 26.42 26.42 25.15 25.15 35.31 35.31 45.47 45.47 32.77 32.77 10.6 10.9 35.18 35.18 43.48 43.48
(H) In.
mm.
.214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .257 6.53 .257 6.53 .214 5.44 .214 5.44 .214 5.44 .214 5.44 .257 6.53 .257 6.53 1.440 36.6 1.440 36.6 .307 7.80 .307 7.80 .307 7.80 .307 7.80
U.S. CAGE Code 06324
(J)
(K)
In.
mm.
In.
mm.
.450 .450 .600 .600 .750 .750 .850 .850 1.000 1.000 1.150 1.150 1.100 1.100 1.460 1.460 1.900 1.900 1.400 1.400 .310 .310 1.495 1.495 1.822 1.822
11.43 11.43 15.24 15.24 19.05 19.05 21.59 21.59 25.40 25.40 29.21 29.21 27.94 27.94 37.08 37.08 48.26 48.26 35.56 35.56 7.87 7.87 38.00 38.00 46.28 46.28
.324 .324 .324 .324 .324 .324 .324 .324 .324 .324 .324 .324 .367 .367 .324 .324 .324 .324 .367 .367 .367 .367 .417 .417 .417 .417
8.23 8.23 8.23 8.23 8.23 8.23 8.23 8.23 8.23 8.23 8.23 8.23 9.32 9.32 8.23 8.23 8.23 8.23 9.32 9.32 9.32 9.32 10.59 10.59 10.59 10.59
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-16 E-Mail:
[email protected]
Micro-D Harness
MWDM Micro-D Shielded Cable Assembly
177-710 (Untwisted Wire) and 177-740 (Twisted Wire Pairs)
177-740 9 THRU 51 CONTACT TWISTED PAIR WIRING DIAGRAM 1 6 2 7 3 8 4 9 5
WHT BLU WHT BLU WHT BLU WHT BLU WHT
9 Contacts
1 9 2 10 3 11 4 12 5 13 6 14 7 15 8
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
15 Contacts
1 12 2 13 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 11
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
21 Contacts 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
25 Contacts
1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 35 10 26 11 27 12 28 13 29 14 30 15 31 16
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
1 27 2 28 3 29 4 30 5 31 6 32 7 33 8 34 9 35 10 36 11 37 12 38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 51 26
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
31 Contacts
51 Contacts 2 Row special
1 20 2 21 3 22 4 23 5 24 6 25 7 26 8 27 9 28 10 29 11 30 12 31 13 32 14 33 15 34 16 35 17 36 18 37 19
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
37 Contacts 1 19 2 20 3 21 4 22 5 23 6 24 7 25 8 26 9 27 10 28 11 29 12 30 13 31 14 32 15 33 16 34 17 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 18
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
51 Contacts © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-17 E-Mail:
[email protected]
B
Micro-D Harness
MWDM Micro-D Shielded Cable Assembly
177-710 (Untwisted Wire) and 177-740 (Twisted Wire Pairs)
177-740 67 THRU 130 CONTACT TWISTED PAIR WIRING DIAGRAM
B
1 35 2 36 3 37 4 38 5 39 6 40 7 41 8 42 9 43 10 44 11 45 12 46 13 47 14 48 15 49 16 50 17 51 18 52 19 53 26 54 21 55 22 56 23 57 24 58 25 59 26 60 27 61 28 62 29 63 30 64 31 65 32 66 33 67 34
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
67 Contacts
1 25 2 26 3 27 4 28 5 29 6 30 7 31 8 32 9 33 10 34 11 35 12 36 13 37 14 38 15 39 16 40 17 41 18 42 19 43 20 44 21 45 22 46 23 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 24
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
69 Contacts
1 27 2 28 3 29 4 30 5 31 6 32 7 33 8 34 9 35 10 36 11 37 12 38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 26
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT
75 Contacts
1 27 2 28 3 29 4 30 5 31 6 32 7 33 8 34 9 35 10 36 11 37 12 38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 51 26 100 52 76 53 77 54 78 55 79 56 80 57 81 58 82 59 83 60 84 61 85 62 86 63 87 64 88 65 89 66 90 67 91 68 92 69 93 70 94 71 95 72 96 73 97 74 98 75 99
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU
1 34 2 35 3 36 4 37 5 38 6 39 7 40 8 41 9 42 10 43 11 44 12 45 13 46 14 47 15 48 16 49 17 50 18 51 19 52 20 53 21 54 22 55 23 56 24 57 25 58 26 59 27 60 28 61 29 62 30 63 31 64 32 65 66 99 67 100
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU
WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU WHT BLU
68 101 69 102 70 103 71 104 72 105 73 106 74 107 75 108 76 109 77 110 78 111 79 112 80 113 81 114 82 115 83 116 84 117 85 118 86 119 87 120 88 121 89 122 90 123 91 124 92 125 93 126 94 127 95 128 96 129 97 130 33 98
130 Contacts
100 Contacts © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-18 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Metal Shell Uninsulated Wire Connector Micro-D Uninsulated Pigtails–These connectors feature gold-plated TwistPin contacts and mil spec crimp termination to gold-plated solid copper wire. Suitable for soldering or splicing applications, the wire leads can be ordered either gold-plated or solder-dipped. New One-Piece Socket Contact–An “integral tail” socket contact is now standard on all socket connectors ordered with 24 AWG or 25 AWG, up to one inch of wire. This phospher bronze contact eliminates the crimp joint and offers greater rigidity.
mwdm
2
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130 (See Table II)
l-
37
p-
5
c
4-
.250
m
Stainless Steel Shell 3 - Passivated
2 - Nickel 5 - Gold
Wire Type
C – Solid Copper
Wire Finish
3 – Solder-Dipped Sn 60/40 4 – Gold
Wire Length (Inches)
.125, .250, .375, .500, .750, 1.000, 2.000 Wire Length In Inches. “.500” Specifies Half Inch.
Hardware
B, P, M, M1, S, S1, L, K, F, R, H (See Table I)
K L
Table I: Mounting Hardware M1
S
F
J
P – Pin S – Socket 4 – #24 (.020”) 5 – #25 (.018”) 6 – #26 (.016”)
M
D
H
Contact Type
P
C
G
Wire Gage (AWG)
B
B
E
How To Order Uninsulated Wire Micro-D Connectors Sample Part Number
A
S1
L
K
F
R
H
M N
Jackpost
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
Hex Head Jackscrew NonRemovable
Slot Head Jackscrew NonRemovable Extended
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
Threaded Insert
P Q INDEX
Thru-Hole
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-19 E-Mail:
[email protected]
Micro-D Harness
Micro-D MWDM Metal Shell Uninsulated Wire Connector Table II: Dimensions
A B
A B C E
C D E F G H J K L M N P Q
F
LENGTH +0.2/-0.0 (+5.08/-0.0)
G
D
J .093 ± .005 (2.36 ± 0.13)
9-69 CONTACTS: .096/.088 (2.43/2.23) DIA. 75-130 CONTACTS: .151/.145 (3.81/3.68) DIA.
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 75P 75S 100P 100S 130P 130S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.08 2.08 2.170 2.170
19.9 19.9 23.8 23.8 27.6 27.6 30.0 30.0 33.9 33.9 37.7 37.7 36.5 36.5 46.6 46.6 56.8 56.8 44.1 44.1 52.8 52.8 55.1 55.1
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.705 1.705 1.800 1.800
14.4 14.4 18.2 18.2 22.0 22.0 24.5 24.5 28.3 28.3 32.1 32.1 30.9 30.9 41.0 41.0 51.2 51.2 38.5 38.5 43.3 43.3 45.7 45.7
2.52 2.52
64.0 64.0
2.15 2.15
54.6 54.6
In.
mm.
H D Max.
E Max.
F
In.
mm.
In.
mm.
.333 8.5 .400 10.2 .483 12.3 .551 14.00 .633 16.0 .701 17.8 .733 18.6 .801 20.4 .883 22.4 .951 24.2 1.033 26.2 1.101 28.0 .983 28.0 1.051 27.0 1.384 35.0 1.450 36.8 1.784 45.3 1.850 46.99 1.284 32.61 1.350 34.29 1.384 35.154 1.45 36.83 1.383 35.13 1.451 36.86
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .184 .250 .184 .250 .228 .296 .228 .296 .270 .333
4.7 6.35 4.7 6.4 4.7 6.4 4.7 6.4 4.7 6.4 4.7 6.4 5.8 7.5 4.7 6.4 4.7 6.4 5.8 7.5 5.8 7.5 6.9 8.5
.308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .308 .308 .310 .310 .351 .351 .351 .351 .394 .394
7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.82 7.82 7.87 7.87 8.92 8.92 8.9 8.9 10.01 10.01
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
1.735 1.795
.270 .333
6.86 8.5
.394 .394
10.01 10.01
0.183 0.195
44.1 45.6
Performance Specifications
INDEX
Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
© 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
G Max.
In. mm. ± .003 ± 0.08
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.6 5.0 4.65 4.95
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.6 10.9 10.57 10.90
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350 1.350 1.44 1.44 1.442 1.442
10.2 10.2 14.0 14.0 17.8 17.8 20.3 20.3 24.1 24.1 27.9 27.9 26.7 26.7 36.8 36.8 36.8 36.8 34.3 34.3 36.6 36.6 36.6 36.6
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310 .310 .310 .310 .360 .360
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 7.9 7.9 9.14 9.14
4.65 4.95
.416 .429
10.57 10.90
1.780 1.780
45.21 45.21
.360 .360
9.14 9.14
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, _Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-20 E-Mail:
[email protected]
Micro-D Harness
Micro-D Metal Shell GMDR Insulated Wire with Right Angle Exit
Micro-D Right Angle –These connectors feature a space saving right angle exit on either the long or short row and incorporate gold-plated TwistPin contacts and mil spec crimp termination. Specify nickel-plated shells or cadmium plated shells for best availability. 100% tested and backpotted, ready for use.
gmdr
s
2
Series
GMDR Glenair Micro-D Right Angle
Wire Exit
S - Exit Towards Short Row L - Exit Towards Long Row (See Table I)
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130 (See Table III)
Contact Type
P – Pin S – Socket
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J Wire Only)
Wire Type
K - M222759/11 J - M22759/33 E - NEMA HP3-EB
Wire Color
1 - White 2 - Yellow 5 - Color Coded (Full Color) 7 - 10 Color Repeat
Wire Length Inches
18 = 18 inches
Hardware
B, P, M, M1, S, S1, L, K, F, R, H, G (See Table II)
l-
37
s
6
k
7-
18
b
F G H J K
GMDRL
GMDRS
L
PIN 1
M
PIN 1
Table II: Mounting Hardware P
M
M1
S
D E
Stainless Steel Shell 3 - Passivated
Table I: GMDR Wire Exit
B
B C
How To Order GMDR Right Angle Exit Connector Sample Part Number
A
S1
L
K
F
R
H
N P
Jackpost
© 2013 Glenair, Inc.
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
Hex Head Jackscrew NonRemovable
High Performance Micro-D Connectors and Cables
Slot Head Float Mount Jackscrew For Front NonPanel Removable Mounting Extended
U.S. CAGE Code 06324
Float Mount For Rear Panel Mounting
Threaded Insert
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-21 E-Mail:
[email protected]
Q INDEX
Thru-Hole
Micro-D Harness
A
Micro-D Metal Shell GMDR Insulated Wire with Right Angle Exit
Table III: Dimensions H
.094
A
D
B
C
G
F
J
B C
Length L +0.2/-0.0 (+5.08-0.0)
(GMDRS) .250 max potting size 51, 69, 75, 100 and 130
9-69 contacts: .096/.088 (2.43/2.23) Dia. 75-130 contacts: .151/.145 (3.81/3.68) Dia.
E
D E F G H J K L M N P Q
Shell Size 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67P 69P 69S 75P 75S 100P 100S 130P 130S
A Max in 0.785 0.785 0.935 0.935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.080 2.080 2.170 2.170 2.520 2.520
mm 19.9 19.9 23.7 23.7 27.6 27.6 30.1 30.1 33.9 33.9 37.7 37.7 36.4 36.4 46.6 46.6 56.8 56.8 44.1 44.1 52.8 52.8 55.1 55.1 64.0 64.0
B ±.003 in 0.565 0.565 0.715 0.715 0.865 0.865 0.965 0.965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.705 1.705 1.800 1.800 2.150 2.150
mm 14.4 14.4 18.2 18.2 22.0 22.0 24.5 24.5 28.3 28.3 32.1 32.1 30.9 30.9 41.0 41.0 51.2 51.2 38.5 38.5 43.3 43.3 45.7 45.7 54.6 54.6
C Max in 0.333 0.400 0.483 0.551 0.633 0.701 0.733 0.801 0.883 0.951 1.033 1.101 0.983 1.051 1.384 1.450 1.784 1.850 1.284 1.350 1.384 1.450 1.383 1.451 1.735 1.795
mm 8.5 10.2 12.3 14.0 16.1 17.8 18.6 20.3 22.4 24.2 26.2 28.0 25.0 26.7 35.2 36.8 45.3 47.0 32.6 34.3 35.2 36.8 35.1 36.9 44.1 45.6
D Max in 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.228 0.296 0.184 0.250 0.184 0.250 0.228 0.296 0.228 0.296 0.270 0.333 0.270 0.333
mm 4.7 6.4 4.7 6.4 4.7 6.4 4.7 6.4 4.7 6.4 4.7 6.4 5.8 7.5 4.7 6.4 4.7 6.4 5.8 7.5 5.8 7.5 6.9 8.5 6.9 8.5
E Max in 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.351 0.351 0.308 0.308 0.308 0.308 0.351 0.351 0.351 0.351 0.394 0.394 0.394 0.394
mm 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 8.9 8.9 7.8 7.8 7.8 7.8 8.9 8.9 8.9 8.9 10.0 10.0 10.0 10.0
F±.003 in 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195
INDEX
© 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
G Max in 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429 0.416 0.429
mm 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9 10.6 10.9
H Max in 0.400 0.400 0.550 0.550 0.700 0.700 0.800 0.800 0.950 0.950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350 1.350 1.440 1.440 1.442 1.442 1.780 1.780
J Max
mm 10.2 10.2 14.0 14.0 17.8 17.8 20.3 20.3 24.1 24.1 27.9 27.9 26.7 26.7 36.8 36.8 47.0 47.0 34.3 34.3 36.6 36.6 36.6 36.6 45.2 45.2
in 0.270 0.270 0.270 0.270 0.270 0.270 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.270 0.270 0.270 0.270 0.310 0.310 0.310 0.310 0.360 0.360 0.360 0.360
mm 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 7.9 7.9 6.9 6.9 6.9 6.9 7.9 7.9 7.9 7.9 9.1 9.1 9.1 9.1
Materials and Finishes
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
mm 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0 4.6 5.0
Connector Shell Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
High Performance Micro-D Connectors and Cables
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Liquid Crystal Polymer (LCP) Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-22 E-Mail:
[email protected]
Micro-D Harness
Micro-D Metal Shell GMDE Environmentally Sealed Rear Panel Mount With O-Ring
RMI
RMI Style Blind tapped mounting holes with stainless steel inserts accomodate either #4-40 or M3 mounting screws. Connectors are supplied with jackposts installed. Socket connectors feature integral jackposts. CMI Style Space-saving design uses rear panel mount jackposts to attach connectors to the panel.
Choose the Style That Meets Your Needs– RMI version features blind tapped mounting holes, allowing secure installation on panels. CMI version saves space by using rear panel jackposts to attach the connector. Mates to Standard M83513 Connectors– GMDE connectors meet the requirements of MIL-DTL-83513 and feature TwistPin contacts for best performance. Meets MIL-STD-810 Immersion– The nitrile O-ring and a special epoxy wire sealing process allow GMDE connectors to meet immersion requirements.
CMI
Protect Your Equipment with Ruggedized Micro-D Connectors Tactical communications boxes must be sealed to prevent water ingress. Standard M83513 type Micro connectors can be difficult to seal to a bulkhead. The flange is too narrow for a gasket, and sealing with RTV can be time-consuming and messy. The Glenair GMDE connector with O-rings provide a better way to seal the connector. How To Order GMDE Connectors Sample Part Number
GMDE
2
25
S-
RMI
Series
GMDE Glenair Micro-D Environmental
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2, 67, 100 (See Table I)
Contact Type
P - Pin S - Socket
Flange Style
RMI - Blind Tapped Mounting CMI - Space Saving Rear Panel Mount with Jackposts
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 – #30 (J type only)
Wire Type
K – M22759/11 600 VRMS fluoropolymer (TFE)
J – M22759/33 600 VRMS Modified CrossLinked Tefzel® (ETFE)
Wire Color
Wire Length Inches
18 - Wire Length In Inches. “18” Specifies 18 Inches.
© 2013 Glenair, Inc.
K
7-
18
SM
Stainless Steel Shell 3 - Passivated
1 - White 2 - Yellow 5 - Color Coded, Stripes Per MIL-STD-681 (Up to 51 colors) 7 – Ten Color Repeating
Hardware
4
RMI Style Only SM - Furnished with Jackposts and M3 Mounting Holes SU - Furnished with Jackposts and #4-40 Mounting Holes
High Performance Micro-D Connectors and Cables
E – NEMA HP3-EB 600 VRMS Type E M16878/4 (TFE)
CMI Style Only Jackposts for Rear Panel Mount T - .094 (2.4) V - .062 (1.6) W - .047 (1.2) X - .031 (0.8)
U.S. CAGE Code 06324
Y - .023 (0.65)
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-23 E-Mail:
[email protected]
B
Micro-D Harness
Micro-D Metal Shell GMDE Environmentally Sealed Rear Panel Mount With O-Ring
Table I: RMI Dimensions A B C
B
J
M3 FEMALE THREADS OR #4-40 UNC THREADS 2 PLCS
E
WIRE LENGTH +1.0/-0.0 (+25.4/-0.0)
D INTEGRAL JACKPOST (SOCKET) 9-67 CONTACTS #2-56 UNC-2B 100 CONTACTS #4-40 UNC-2B
F
G
094 . ± .002 (2.39 ± 0.05)
.526 (13.36) MAX 9-67 CONTACTS .599 (15.21) MAX 100 CONTACTS
Socket RMI Style Connector
H A B C M3 FEMALE THREADS OR #4-4 0 UNC THREADS 2 PL CS
D E
J JACKPOST 9-67 CONTACTS #2-56 UNC-2B 100 CONTACTS #4-40 UNC-2B G
F 094. ± .002 (2.39 ± 0.05)
WIRE LENGTH +1.0/-0.0 (+25.4/-.00)
.510 (12.95 ) MA X 9-67 CONTACT S .584 (14.83 ) MA X 100 CONTACTS
Pin RMI Style Connector
H F
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 100P 100S
In.
mm.
1.488 1.488 1.638 1.638 1.788 1.788 1.888 1.888 2.038 2.038 2.188 2.188 2.138 2.138 2.538 2.538 2.938 2.938 2.820 2.820
37.79 37.79 41.60 41.60 45.41 45.41 47.95 47.95 51.76 51.76 55.57 55.57 54.30 54.30 64.46 64.46 74.62 74.62 71.62 71.62
© 2013 Glenair, Inc.
B In . ± .003 1.011 1.011 1.161 1.161 1.311 1.311 1.411 1.411 1.561 1.561 1.711 1.711 1.661 1.661 2.061 2.061 2.461 2.461 2.312 2.312
C mm. ± 0.08 25.69 25.69 29.50 29.50 33.31 33.31 35.85 35.85 39.66 39.66 43.47 43.47 42.40 42.40 52.36 52.36 62.52 62.52 58.72 58.72
In . ± .003 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.800 1.800
D Max. mm. ± 0.08 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 45.72 45.72
E Max.
F Max.
In.
mm.
In.
mm.
In.
mm.
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .184 .250 .184 .250 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 4.67 6.35 5.69 7.44 6.86 8.46
.675 .675 .675 .675 .675 .675 .675 .675 .675 .675 .675 .675 .714 .714 .675 .675 .675 .675 .875 .875
17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 18.13 18.13 17.13 17.13 17.13 17.13 22.13 22.13
.333 .728 .483 .878 .633 1.028 .733 1.128 .883 1.278 1.033 1.428 .983 1.378 1.384 1.778 1.783 2.178 1.383 2.002
8.46 18.48 12.27 22.29 16.08 26.10 18.62 28.64 22.43 32.45 26.24 36.26 24.97 34.99 35.15 45.15 45.28 55.31 35.13 50.85
High Performance Micro-D Connectors and Cables
G In. mm. ± .003 ± 0.08 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95 .183 4.65 .195 4.95
H Max.
J Max.
In.
mm.
In.
mm.
1.193 1.193 1.343 1.343 1.532 1.532 1.593 1.593 1.743 1.743 1.893 1.893 1.843 1.843 2.243 2.243 2.643 2.643 2.493 2.493
30.29 30.29 34.10 34.10 38.91 38.91 40.45 40.45 44.26 44.26 48.07 48.07 46.80 46.80 56.96 56.96 67.12 67.12 63.32 63.32
.358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .555 .555
9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 14.10 14.10
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-24 E-Mail:
[email protected]
Micro-D Harness
Micro-D Metal Shell GMDE Environmentally Sealed Rear Panel Mount With O-Ring
Table II: CMI Dimensions A B C
E
B
J
D
WIRE LENGTH +1.0/-0.0 (+25.4/-0.0)
REAR PANEL JACKPOST 9-67 CONTACTS #2-56 UNC-2B 100 CONTACTS #4-40 UNC-2B F
G
H A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 100P 100S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
1.025 1.025 1.135 1.135 1.325 1.325 1.430 1.430 1.580 1.580 1.725 1.725 1.675 1.675 2.075 2.075 2.465 2.465 2.600 2.600
26.03 26.03 28.83 28.83 33.63 33.63 36.33 36.33 40.09 40.09 43.83 43.83 42.53 42.53 52.63 52.63 62.63 62.63 63.50 63.50
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.800 1.800
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 45.72 45.72
D Max.
E Max.
In.
mm.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.284 1.350 1.383 1.451
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 32.61 34.29 35.13 36.86
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .184 .250 .184 .250 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 4.67 6.35 5.69 7.44 6.86 8.46
.675 .675 .675 .675 .675 .675 .675 .675 .675 .675 .675 .675 .714 .714 .675 .675 .675 .675 .875 .875
17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 17.13 18.14 18.14 17.13 17.13 17.13 17.13 22.13 22.13
High Performance Micro-D Connectors and Cables
F Max. In. mm. ± .003 ± 0.08 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
G Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
.510 .526 .510 .526 .510 .526 .510 .526 .510 .526 .510 .526 .510 .526 .510 .526 .510 .526 .585 .600
12.95 13.36 12.95 13.36 12.95 13.36 12.95 13.36 12.95 13.36 12.95 13.36 12.95 13.36 12.95 13.36 12.95 13.36 14.83 15.24
.835 .835 .950 .950 1.090 1.090 1.190 1.190 1.345 1.345 1.505 1.505 1.445 1.445 1.835 1.835 2.250 2.250 2.135 2.135
21.21 21.21 24.13 24.13 27.63 27.63 30.13 30.13 34.13 34.13 38.13 38.13 36.63 36.63 46.63 46.63 57.13 57.13 54.13 54.13
.358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .358 .555 .555
9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 9.10 14.10 14.10
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-25 E-Mail:
[email protected]
Micro-D Harness
Micro-D Metal Shell GMDE Environmentally Sealed Panel Mount With O-Ring
Table III: GMDE Panel Cutout Dimensions
RMI Version
B
A B
0.4x45° Chamf
Connector Enters From This Side
C Full Radius Ø .134 ± .004 (3.40 ± 0.10) 2 Plcs
Section Thru Cut Out
CMI Version D E
G ØF
.062 (1.57) RADIUS 4 PLACES A
B
C
Layout
In . ± .003
mm. ± 0.08
In . ± .005
mm. ± 0.13
9 15 21
1.011 1.161 1.311 1.411 1.561 1.711 1.661 2.061 2.461 2.312
25.69 29.50 33.31 35.85 39.66 43.47 42.20 52.36 62.52 58.72
.731 .881 1.031 1.131 1.281 1.431 1.381 1.781 2.181 2.005
18.56 22.37 26.18 28.72 32.53 36.34 35.07 45.23 55.39 50.93
25 31 37 51 51-2 67 100
© 2013 Glenair, Inc.
D
In . mm. + .005/-0 + 0.13/-0 .252 .252 .252 .252 .252 .252 .295 .252 .252 .333
6.40 6.40 6.40 6.40 6.40 6.40 7.50 6.40 6.40 8.47
E
F
G
In . ± .005
mm. ± 0.13
In . ± .005
mm. ± 0.13
In. ± .002
mm. ± 0.05
In . ± .005
mm. ± 0.13
.565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.800
14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 45.72
.406 .556 .706 .806 .956 1.106 1.056 1.456 2.606 1.520
10.31 14.12 17.93 20.47 24.28 28.09 26.82 36.98 66.19 38.61
.126 .126 .126 .126 .126 .126 .126 .126 .126 .148
3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.76
.256 .256 .256 .256 .256 .256 .300 .256 .256 .406
6.50 6.50 6.50 6.50 6.50 6.50 7.62 6.50 6.50 10.31
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-26 E-Mail:
[email protected]
Micro-D Harness
Micro-D GSWM SpaceWire Cable Assembly
in Back-to-Back or Single Ended Wire Configurations Single-Ended or Double-Ended–These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 100% tested and ready for use. High Performance Insulation–Expanded polytetrafluoroethylene (EPTFE) allows for the support of LVDS technology to significantly reduce data loss while allowing for the implementation of standard hardware protocols, thus eliminating the need for design customizations while reducing costs.
Cost Saving, Easy Integration and High-Performance for Flight and Lab Grade Data Transmission. The success of any space mission begins with reliable data transmission and Glenair SpaceWire cables, built to meet the strict standards set forth by ECSS-E-ST-50-12C, make this a reality. Our SpaceWire cables offer bidirectional, high speed data transmission rates up to 400 Mbits/s while significantly reducing cross talk, skew, and signal attenuation. By incorporating a serial, point-to-point cable, with low voltage differential signaling (LVDS) reduced costs are realized through an easily integrated data transmission cable. These features allow SpaceWire cables to be incorporated across various satellite programs without the expense of costly design customization. How To Order SpaceWire Cable Assembly Sample Part Number
GSWM
Product Series
GSWM Glenair SpaceWire Micro-D
Shell Plating
2 - Electroless Nickel 5 - Gold
Insulator Material
L - LCP
Shell Size
9
Connector Type
P - Single Ended Pin (Plug) GP - Pin (Plug) Connector Both Ends
Wire Gauge
6 - 26 AWG 8 - 28 AWG 0 - 30 AWG (30 AWG–Lab Only)
Cable Type
F - Flight Grade L - Lab Grade
Termination Option
B - Backshell
Cable Length In Inches
16 - 16 inches (12 inches minimum)
Hardware
S - Male Slotted Jackscrew P - Female Jackpost
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
2
L
-9
GP
U.S. CAGE Code 06324
-6
F
B
-16
S
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-27 E-Mail:
[email protected]
B
Micro-D Harness
Micro-D GSWM SpaceWire Cable Assembly
in Back-to-Back or Single Ended Wire Configurations
Single Ended Wiring
Back To Back Wiring
B
Diagram (P)
Diagram (GP)
P1
P2
P1 1
9
1
6
5
6
2
8
2
7
4
7
3
3
3
8
2
8
4
7
4
9
1
9
5
6
5
+3.00" L -0.00" Glenair Backshell
Pin 1
Pin 1
Jackscrew Hardware
Notes:
1. Flight grade (cable Type F) assemblies to be screened IAW NASA EEE-INST-002, Table 2. Level 1 with 100% thermal vacuum outgassing (24 hours/+125°C/10-6 torr). Reference Glenair Mod Code 429C. 2. Operating temperature - 200°C to +180°C. Reference Glenair Mod Code 428. 3. Electrical performance: Dielectric withstanding voltage: 600 VAC. Insulation resistance: 5000 megohms @500 VDC. 4. Assembly to be identified with Glenair’s name, Part Number, Cage Code and Date Code or ESCC Component Part Marking Standards.
© 2013 Glenair, Inc.
Materials/finish: • • • •
Shells/backshells - aluminum alloy/electroless nickel. Insulators - high grade rigid dielectric/N.A. Contacts - copper alloy, gold plated. Hardware - stainless steel/passivated.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-28 E-Mail:
[email protected]
Micro-D Harness
Micro-D GMLM MasterLatch® Pre-Wired Latching Micro-D Connector with Insulated Wire
MasterLatch® Micro-D (GMLM) Quick-release locking Micro-D connector pairs are equipped with a precision latching and locking mechanism. The single thumb latch on the plug side actuates a pair of locking latches that mate quickly and reliably to GMLM receptacles. These TwistPin equipped, low-insertion-force connectors meet all the standard performance requirements of MIL-DTL-8513 including vibration, shock, and mating durability. Choose from 6 different insert arrangements from 9 to 37 contacts. The unique ergonomic latching mechanism can be easily activated with a thumb and forefinger grip even when wearing gloves, or when difficult access to connector pairs makes the use of jacking hardware and tools impossible. How To Order GMLM MasterLatch® Sample Part Number
GMLM
2
L
-25
P
-6
Product Series
GMLM Glenair MasterLatch® Micro-D
Shell Plating
1- Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS
Contact Layout
9, 15, 21, 25, 31, 37
Connector Type
P - Pin (Plug) S - Socket (Receptacle)
Wire Gauge
4 - 24 AWG 6 - 26 AWG 8 - 28 AWG 0 - 30 AWG (J Wire Only)
Wire Type
K - M22759/11 60 Vrms Fluoropolymer J - M22759/33 600 Vrms Modified Cross-Linked Tefzel (ETFE)
Wire Color Code
1 - White 2 - Yellow 5 - Color Coded 7 - Ten Color Repeating
Cable Length In Inches
18 - 18 inches
Materials and Finishes Connector Shell Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Liquid Crystal Polymer (LCP) or Polyphenylene Sulffide (PPS) Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
© 2013 Glenair, Inc.
K
7
-18
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
High Performance Micro-D Connectors and Cables
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-29 E-Mail:
[email protected]
B
Micro-D Harness
Micro-D GMLM MasterLatch® Pre-Wired Latching Micro-D Connector with Insulated Wire
GMLM MasterLatch Dimensions Plug
B
Receptacle WIRE LENGTH +1.0/-0.0
WIRE LENGTH +1.0/-0.0
G
A
A
B
B
C
C
E E
D
F
F
Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
A Max In mm 0.785 19.94 0.785 19.94 0.935 23.75 0.935 23.75 1.085 27.56 1.085 27.56 1.185 30.10 1.185 30.10 1.335 33.91 1.335 33.91 1.485 37.72 1.485 37.72
© 2013 Glenair, Inc.
D
B Max In mm 0.333 8.46 0.342 8.69 0.483 12.27 0.492 12.50 0.633 16.08 0.642 16.31 0.733 18.62 0.742 18.85 0.883 22.43 0.892 22.66 1.033 26.24 1.042 26.47
C In 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320
mm 8.13 8.13 8.13 8.13 8.13 8.13 8.13 8.13 8.13 8.13 8.13 8.13
D Max In mm 0.610 15.49 0.429 10.90 0.610 15.49 0.429 10.90 0.610 15.49 0.429 10.90 0.610 15.49 0.429 10.90 0.610 15.49 0.429 10.90 0.610 15.49 0.429 10.90
High Performance Micro-D Connectors and Cables
E Max In mm 0.290 7.37 0.295 7.49 0.290 7.37 0.295 7.49 0.290 7.37 0.295 7.49 0.290 7.37 0.295 7.49 0.290 7.37 0.295 7.49 0.290 7.37 0.295 7.49
F Max In mm 0.400 10.16 0.400 10.16 0.550 13.97 0.550 13.97 0.700 17.78 0.700 17.78 0.800 20.32 0.800 20.32 0.950 24.13 0.950 24.13 1.100 27.94 1.100 27.94
U.S. CAGE Code 06324
G In 0.183 N/A 0.183 N/A 0.183 N/A 0.183 N/A 0.183 N/A 0.183 N/A
mm 4.65 N/A 4.65 N/A 4.65 N/A 4.65 N/A 4.65 N/A 4.65 N/A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-30 E-Mail:
[email protected]
Micro-D PCB
Section C Micro-D Metal Shell Printed Circuit Board Connectors Product Selection Guide GRPM Condensed Board, Rear Panel Mount Connector GRPM CBS, Condensed Board Straight, .100" x .075" Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-2 GRPM CBR, Condensed Board Right Angle, .100" x .100" Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . Page C-4
C MWDM Thru-Hole MWDM BS, Vertical, .100" X .100" Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-6 MWDM BR, Right Angle, .100" X .100" Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-10
MWDM Condensed Board, Thru-Hole MWDM CBS, Condensed Board Straight, .100" X .075" Pitch . . . . . . . . . . . . . . . . . . . . . . . . . Page C-14 MWDM CBR, Condensed Board Right Angle, .100" X .100" Pitch. . . . . . . . . . . . . . . . . . . . . . Page C-22
MWDM Surface Mount MWDM Right Angle, .025” Between PCB Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-28
GMR75 Condensed Board, Thru-Hole GMR7580 Vertical, .075" X .075" Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-32 GMR7590 Right Angle, .075" X .075" Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-36
GMR75C Compact Flange GMR 7580 Vertical, .075" X .075" Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-40 GMR 7590 Right Angle, .075" X .075" Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page C-44
GMLM MasterLatch® GMLMR CBS Condensed Board Straight, Vertical, .100” X .075” Pitch. . . . . . . . . . . . . . . . . . Page C-48 GMLMR CBR Condensed Board Right Angle, .100" X .100" Pitch. . . . . . . . . . . . . . . . . . . . . . Page C-50
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-1 E-Mail:
[email protected]
Micro-D PCB
MIcro-D GRPM-CBS Condensed Vertical Rear Panel Mount
Wide Flange Printed Circuit Board Connectors Save Space On Your Circuit Board – These Micro-D connectors feature .075 inch row spacing. The board footprint is reduced to match the size of the connector body. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance.
C
High Performance – These connectors meet the demanding requirements of MIL-DTL-83513. How To Order GRPM Condensed Vertical Connector Sample Part Number
Grpm
2
l-
15
Series
GRPM Glenair Rear Panel Mount
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51-2, 51, 69, 75, 100, 130 (See Table I)
Contact Type
P – Pin S – Socket
Termination Type
CBS - Condensed Board Straight
Rear Panel Mount Hardware Option
B - No hardware R3 - .062 panel
Threaded Insert Option
T - Threaded Insert in Board Mount Hole Omit for none 9-69 Contacts - 2-56 75-130 Contacts - 4-40
O-Ring
C - Conductive
Lead Length
.080, .110, .125, .140, .150, .172, .190, .250
Gold-Plated Terminal Mod Code
T hese connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
t
n
-.110
513
N - Non–Conductive (Nitrile)
Materials and Finishes
Insulator
Liquid Crystal Polymer (LCP) or Polyphenylene Sulffide (PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
© 2013 Glenair, Inc.
r3
R1 - .032 panel R2 - .047 panel R4 - .093 panel R5 - .125 panel R6 - .080 panel
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
1. Performance data per MIL-DTL-83513 2. Interface dimensions per MIL-DTL-83513
cbs
Stainless Steel Shell 3 - Passivated
Connector Shell
Notes:
p
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resistance Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
3. PCB layout per Glenair MWDMCBS catalog data. See Section C
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-2 E-Mail:
[email protected]
Micro-D PCB
MIcro-D GRPM-CBS Condensed Vertical Rear Panel Mount
Wide Flange Printed Circuit Board Connectors Table I: Dimensions H B
24 AWG (ø.020) SOLDER DIPPED LEADS
C
J
.025 PIN 1
A B
SKT 1 E MAX
G .093
D
F
C MAX
A
B
C Max
Layout
in. ± .005
mm. ± .13
in. ± .003
mm. ± .08
in.
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P
0.960 0.960 1.110 1.110 1.260 1.260 1.360 1.360 1.510 1.510 1.660
24.38 24.38 28.19 28.19 32.00 32.00 34.54 34.54 38.35 38.35 42.16
0.565 0.565 0.715 0.715 0.865 0.865 0.965 0.965 1.115 1.115 1.265
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13
0.334 0.400 0.484 0.550 0.634 0.700 0.734 0.800 0.884 0.950 1.034
D
E Max
mm.
in. ± .005
mm. ± .13
in.
8.48 10.16 12.29 13.97 16.10 17.78 18.64 20.32 22.45 24.13 26.26
0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480
12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19
0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.184
F ± .003
G Max
H Max
J Max
mm.
in. ± .003
mm. ± .08
in.
mm.
in.
mm.
in.
mm.
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67
0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183 0.195 0.183
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65
0.555 0.555 0.555 0.555 0.555 0.555 0.555 0.555 0.555 0.555 0.555
14.10 14.10 14.10 14.10 14.10 14.10 14.10 14.10 14.10 14.10 14.10
0.785 0.785 0.935 0.935 1.085 1.085 1.185 1.185 1.335 1.335 1.485
19.94 19.94 23.75 23.75 27.56 27.56 30.10 30.10 33.91 33.91 37.72
0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87
37S
1.660
42.16
1.265
32.13
1.100
27.94
0.480
12.19
0.250
6.35
0.195
4.95
0.555
14.10
1.485
37.72
0.310
7.87
51-2P 51-2S 51P 51S 69P 69S 75P 75S
2.010 2.010 1.660 1.660 1.960 1.960 2.150 2.150
51.05 51.05 42.16 42.16 49.78 49.78 54.61
1.615 1.615 1.215 1.215 1.515 1.515 1.705
41.02 41.02 30.86 30.86 38.48 38.48 43.31
1.384 1.450 0.984 1.050 1.284 1.358 1.384
35.15 36.83 24.99 26.67 32.61 34.49 35.15
0.480 0.480 0.525 0.525 0.525 0.525 0.525
12.19 12.19 13.34 13.34 13.34 13.34 13.34
0.184 0.250 0.224 0.293 0.224 0.293 0.224
4.67 6.35 5.69 7.44 5.69 7.44 5.69
0.183 0.195 0.183 0.195 0.183 0.195 0.183
4.65 4.95 4.65 4.95 4.65 4.95 4.65
0.555 0.555 0.555 0.555 0.555 0.555 0.555
14.10 14.10 14.10 14.10 14.10 14.10 14.10
1.835 1.835 1.435 1.435 1.735 1.735 2.080
46.61 46.61 36.45 36.45 44.07 44.07 52.83
0.310 0.310 0.400 0.400 0.400 0.400 0.400
7.87 7.87 10.16 10.16 10.16 10.16 10.16
100P 100S 130P 130S
2.385 2.385 2.735 2.735
54.61 60.58 60.58 69.47 69.47
1.705 1.800 1.800 2.150 2.150
43.31 45.72 45.72 54.61 54.61
1.450 1.384 1.451 1.735 1.795
36.83 35.15 36.86 44.07 45.60
0.525 0.600 0.600 .600 .600
13.34 15.24 15.24 15.24 15.24
0.293 0.270 0.333 .270 .333
7.44 6.86 8.46 6.86 8.46
0.195 0.183 0.195 .183 .195
4.95 4.65 4.95 4.65 4.95
0.555 0.640 0.640 .640 .640
14.10 16.26 16.26 16.26 16.26
2.080 2.170 2.170 2.520 2.520
52.83 55.12 55.12 64.01 64.01
0.400 0.510 0.510 .510 .510
10.16 12.95 12.95 12.95 12.95
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-3 E-Mail:
[email protected]
Micro-D PCB
Micro-D GRPM-CBR Right Angle Rear Panel Mount
Wide Flange Printed Circuit Board Connectors Save Space On Your Circuit Board – These Micro-D connectors feature .100 inch row spacing. The board footprint is reduced to match the size of the connector body. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance.
C
High Performance – These connectors meet all MIL-DTL-83513 requirements. How To Order GRPM Right Angle Connectors Sample Part Number
Grpm
2
l-
15
p
cbr
r3
T
Series
GRPM - Glenair Right Angle Rear Panel Micro
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or Ryton LCP - 30% Glass-Filled Liquid Crystal Polymer PPS - 40% Glass-Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51-2, 51, 69, 75, 100, 130 (See Table I)
Contact Type
P – Pin S – Socket
Termination Type
CBR - Condensed Board Right Angle
Rear Panel Mount Hardware Option
B - No hardware R3 - .062 panel
Threaded Insert Option
T - Threaded Insert in Board Mount Hole; 9 thru 69 Contacts use 2-56; 75-130 Contacts use 4-40 Omit for none
O-Ring
C - Conductive N - Non Conductive (Nitrile)
Lead Lentgth
.080, .110, .125, .140, .150, .172, .190, .250
Gold-Plated Terminal Mod Code
T hese connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
R1 - .032 panel R2 - .047 panel R4 - .093 panel R5 - .125 panel
Materials and Finishes Connector Shell Insulator
Liquid Crystal Polymer (LCP) or Polyphenylene Sulffide (PPS)
Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
1. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification 2. Performance data per MIL-DTL-83513 © 2013 Glenair, Inc.
-.110
513
Stainless Steel Shell 3 - Passivated
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Notes:
n
R6 - .080 panel
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
3. Interface dimensions per MIL-DTL-83513 4. PCB layout per Glenair MWDM CBR catalog data except for dimension shown. See Section C
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-4 E-Mail:
[email protected]
Micro-D PCB
Micro-D GRPM-CBR Right Angle Rear Panel Mount
Wide Flange Printed Circuit Board Connectors Table I: Dimensions K B
G
.093
H
F
C
J
C MAX
A
PIN 1
24 AWG (ø.020) SOLDER DIPPED LEADS
SKT 1
B
E MAX D
L
Layout
A B ± .003 in. mm. in. mm. ± .005 ± .13 ± .003 ± .08
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51-2P 51-2S 51P 51S 69P 69S 75P 75S 100P 100S 130P 130S
.960 .960 1.110 1.110 1.260 1.260 1.360 1.360 1.510 1.510 1.660 1.660 2.010 2.010 1.660 1.660 1.960 1.960 2.150 2.150 2.385 2.385 2.735 2.735
24.38 24.38 28.19 28.19 32.00 32.00 34.54 34.54 38.35 38.35 42.16 42.16 51.05 51.05 42.16 42.16 49.78 49.78 54.61 54.61 60.58 60.58 69.47 69.47
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.615 1.615 1.215 1.215 1.515 1.515 1.705 1.705 1.800 1.800 2.150 2.150
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 41.02 41.02 30.86 30.86 38.48 38.48 43.31 43.31 45.72 45.72 54.61 54.61
C Max in. .334 .400 .484 .550 .634 .700 .734 .800 .884 .950 1.034 1.100 1.384 1.450 0.984 1.050 1.284 1.350 1.384 1.450 1.384 1.451 1.735 1.795
D in. mm. mm. ± .005 ± .13
8.48 10.16 12.29 13.97 16.10 17.78 18.64 20.32 22.45 24.13 26.26 27.94 35.15 36.83 24.99 26.67 32.61 34.29 35.15 36.83 35.15 36.86 44.07 45.60
.480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .480 .525 .525 .525 .525 .525 .525 .600 .600 .600 .600
12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 13.34 13.34 13.34 13.34 13.34 13.34 15.24 15.24 15.24 15.24
E Max in. .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .224 .293 .224 .293 .270 .333 .270 .333
F in. mm. mm. ± .003 ± .08 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 5.69 7.44 5.69 7.44 6.86 8.46 6.86 8.46
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
High Performance Micro-D Connectors and Cables
G Max in. .625 .625 .625 .625 .625 .625 .625 .625 .725 .725 .725 .725 .725 .725 .860 .860 .860 .860 .920 .920 1.210 1.210 1.210 1.210
H J in. mm. in. mm. mm. ± .010 ± .25 ± .010 ± .25
15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 18.42 18.42 18.42 18.42 18.42 18.42 21.84 21.84 21.84 21.84 23.37 23.37 30.73 30.73 30.73 30.73
K Max in.
mm.
L Max in.
mm.
.421 10.69 .441 11.20 .787 19.99 .310 7.87 .421 10.69 .441 11.20 .787 19.99 .310 7.87 .321 8.15 .441 11.20 .937 23.80 .310 7.87 .321 8.15 .441 11.20 .937 23.80 .310 7.87 .321 8.15 .441 11.20 1.087 27.61 .310 7.87 .321 8.15 .441 11.20 1.087 27.61 .310 7.87 .321 8.15 .441 11.20 1.187 30.15 .310 7.87 .321 8.15 .441 11.20 1.187 30.15 .310 7.87 .321 8.15 .441 11.20 1.337 33.96 .310 7.87 .321 8.15 .441 11.20 1.337 33.96 .310 7.87 .321 8.15 .441 11.20 1.487 37.77 .310 7.87 .321 8.15 .441 11.20 1.487 37.77 .310 7.87 .321 8.15 .441 11.20 1.837 46.66 .310 7.87 .321 8.15 .441 11.20 1.837 46.66 .310 7.87 .341 8.66 .491 12.47 1.435 36.45 .351 8.92 .341 8.66 .491 12.47 1.435 36.45 .351 8.92 .341 8.66 .491 12.47 1.740 44.20 .351 8.92 .341 8.66 .491 12.47 1.740 44.20 .351 8.92 .391 9.93 .591 15.01 2.090 53.09 .351 8.92 .391 9.93 .591 15.01 2.090 53.09 .351 8.92 .391 9.93 .591 15.01 2.175 55.25 .394 10.01 .391 9.93 .591 15.01 2.175 55.25 .394 10.01 .391 9.93 .591 15.01 2.520 64.01 .394 10.01 .391 9.93 .591 15.01 2.520 64.01 .394 10.01
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-5 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-BS Vertical Mount Thru-Hole
Printed Circuit Board Connectors High Performance – These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance.
C
Rear Mountable – Can be installed through panels up to .125 inch thick. Specify rear panel mount jackposts. How To Order BS Vertical Style PCB Micro-D Connectors Sample Part Number
mwdm
1
l
-15
p
bs
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1- Cadmium 2- Nickel 4- Black Anodize 5- Gold 6- Chem Film
Insulator Material
L- LCP or PPS LCP - 30% Glass-filled liquid crystal polymer PPS- 40% Glass-filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 100 (See Table II)
Contact Type
P- Pin S- Socket
Termination Type
BS - Board Straight
Jackpost Option
Omit- None P- Jackpost Jackposts for Rear Panel Mounting R1 - .032” Panel R2 - .047” Panel R3 - .062” Panel (See Table I) R4 - .093” Panel R5 - .125” Panel R6 - .080" Panel
Threaded Insert Option
T- Threaded Insert In Board Mount Hole Omit- for Thru-Hole
Terminal Length in Inches
.080, .110, .125, .140, .150, .172, .190, .250 Length in Inches ± .015 (0.38) (See Table II)
Gold-Plated Terminal Mod Code
T hese connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
r3
T
-.110 513
Stainless Steel Shell 3 - Passivated
Table I: Jackpost Options No Designator
P
R1 Thru R6 Panel
THREADED INSERT
Thru-Hole For use with Glenair jackposts only. Order hardware separately. Install with threadlocking compound. © 2013 Glenair, Inc.
Standard Jackpost Factory installed, not intended for removal.
High Performance Micro-D Connectors and Cables
Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compund.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-6 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-BS Vertical Mount Thru-Hole
Printed Circuit Board Connectors Table II: Dimensions
A C
J H B
F
C
K G
ED 2 X PCB MTNG HOLES 9-51 CONTACTS .096 ± .005 (2.43 ± 0.13) 100 CONTACTS .125 ± .005 (23.18 ± 0.13)
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
In. .790 .790 .940 .940 1.180 1.180 1.275 1.275 1.575 1.575 1.875 1.875 1.775 1.775 2.585 2.585
B
C Max.
In. mm. mm. ±.003 ± 0.08 20.07 20.07 23.88 23.88 29.97 29.97 32.39 32.39 40.01 40.01 47.63 47.63 45.09 45.09 65.66 65.66
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
D Max.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46
E Max. In.
F
G
© 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
H
In. mm. In. mm. In. mm. mm. ±.004 ±0.10 ±.010 ±0.25 ±.007 ±0.18
.310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .351 8.92 .183 .351 8.92 .195 .460 11.68 .183 .460 11.68 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
TAIL LENGTH ± .015 (0.38)
.020 ± .002 (0.51± 0.05)
.333 8.46 1.150 .333 8.46 1.150 .333 8.46 1.150 .333 8.46 1.150 .333 8.46 1.450 .333 8.46 1.450 .333 8.46 1.500 .333 8.46 1.500 .333 8.46 1.800 .333 8.46 1.800 .333 8.46 2.100 .333 8.46 2.100 .333 8.46 2.000 .333 8.46 2.000 .525 13.34 2.800 .525 13.34 2.800
29.21 29.21 29.21 29.21 36.83 36.83 38.10 38.10 45.72 45.72 53.34 53.34 50.80 50.80 71.12 71.12
J Max. In. 1.390 1.390 1.390 1.390 1.690 1.690 1.740 1.740 2.040 2.040 2.340 2.340 2.270 2.270 3.250 3.250
K
In. mm. mm. ±.010 ±0.25 35.31 35.31 35.31 35.31 42.93 42.93 44.20 44.20 51.82 51.82 59.44 59.44 57.64 57.64 82.55 82.55
.155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .293 .293
3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 7.44 7.44
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-7 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-BS Vertical Mount Thru-Hole
Printed Circuit Board Connectors
MICRO-D BS Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter 2.000 (50.80) 1.150 (29.21) CL
.050 (1.27)
C
9 5
.100 (2.54) TYP
8 4
.100 (2.54) TYP .050 (1.27) TYP
7
51
6
3
2
CL
.100 (2.54) TYP
35
1
18
.375 (9.53)
50 34
17
.100 (2.54) TYP .050 (1.27) TYP
49 33
48 32
16
15
47
46
31 14
45
30
29
13
44 28
12
43 27
11
26
10
.050 (1.27) 14
.100 (2.54) TYP
13
12
6
5
11 4
10 3
31 1
16
30 15
29 14
28
27
13
26
12
11
25 10
24
11
10
9
18 8
7
4
20
19
3
2
.150 (3.81)
1
6
20 5
19 4
18
17
3
2
1
.150 (3.81)
1.500 (38.10)
16 6
21
22 7
31 PIN
15 5
14 4
.100 (2.54) TYP
13 3
12 2
25 1
.225 (5.72)
CL
.050 (1.27)
.100 (2.54) TYP .050 (1.27) TYP
17
23 8
.100 (2.54) TYP
CL
19
5
.100 (2.54) TYP
9
1.450(36.8)
20
36
21
22
6
37
38
.050 (1.27) TYP
15 PIN
21
23
7
CL
.050 (1.27)
9 2
.225 (5.72)
.050 (1.27)
24
8
39
1.800 (45.72) .100 (2.54) TYP .050 (1.27) TYP
7
40
51 PIN
CL
15
41 25
9
9 PIN 1.150 (29.21)
8
42
13
24 12
23
21
22
11
9
10
.100 (2.54) TYP
20 8
21 PIN
.100 (2.54) TYP .050 (1.27) TYP 19
7
18 6
17 5
16 4
15 3
14 2
.150 (3.81)
1
25 PIN 2.100 (53.34)
Connector Orientation
CL
.050 (1.27) 37
Pin #1
19
.050 (1.27) TYP
36 18
.100 (2.54) TYP
35 17
34 16
.100 (2.54) TYP
33 15
32 14
31 13
30 12
29 11
28 10
27 9
26 8
25 7
24 6
23 5
21
22 4
3
20 2
.150 (3.81)
1
37 PIN 2.800(71.12B ) CL
.100 (2.54) TYP 100
99
75 51
.050 (1.27)
26
50 25
97 73
49 24
.150 (3.81)
.050 (1.27) TYP
98 74
.100 (2.54) TYP
96 72
48 23
95 71
47 22
94 70
46 21
93 69
45 20
92 68
44 19
91 67
43 18
42 17
90
66
89 65
41 16
88 64
40 15
87 63
39 14
86 62 37
38 13
85 61
12
84 60
36 11
83 59
35 10
82 58
34 9
81 57
33 8
80 56
32 7
79 55
31 6
78 54
30 5
77 53
29 4
76 52
28 3
27 2
1
100 PIN
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-8 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-BS Vertical Mount Thru-Hole
Printed Circuit Board Connectors
MICRO-D BS Board Mount Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter 2.000 (50.80) 1.150 (29.21) CL
.050 (1.27) 6 1
.100 (2.54) TYP
7 2
.100 (2.54) TYP .050 (1.27) TYP
8 3
36
9 4
CL
.100 (2.54) TYP
5
1
.375 (9.53)
.050 (1.27) TYP
37
19
20 2
38 21
3
39 22
40 23
4
41 24
5
42 25
6
43 26
7
8
9
.100 (2.54) TYP .050 (1.27) TYP
.050 (1.27)
1
2
.100 (2.54) TYP
12
3
13
4
5
10
14 6
7
1
8
.225 (5.72)
1
2
14 3
15 4
.100 (2.54) TYP
16
18 2
19
20
3
21
4
22
5
23
18
6
19
7
6
7
8
8
20 9
21 10
14 11
.225 (5.72)
.050 (1.27)
1
2
2
9
27
10
11
18
28 12
29
30
13
14
31 15
16
17
3
18
4
19
5
.100 (2.54) TYP .050 (1.27) TYP 20
6
79 54
21
7
22
8
9
23 10
24 11
25 12
.150 (3.81)
13
25 SOCKET
21 2
.100 (2.54) TYP
22 3
23 4
.100 (2.54) TYP
24 5
25 6
26
27
7
8
28 9
29 10
30 11
32
31 12
13
33 14
80 55
30
81 56
57 32
31 5
82
6
83 58
33 7
84 59
34 8
85 60
35 9
86 61
36 10
87 62
37 11
34 15
35 16
36 17
37 18
.150 (3.81)
19
37 SOCKET
.100 (2.54) TYP
.150 (3.81)
.050 (1.27) TYP
4
17
.050 (1.27) TYP
2.800(71.12B ) CL
29 3
26
CL
.100 (2.54) TYP
53
16
35
2.100 (53.34)
20
28
16
.100 (2.54) TYP
1
52
15
.150 (3.81)
CL
15
1
Socket #1
27
25
.050 (1.27)
.050 (1.27)
78
14
51 34
31 SOCKET
Connector Orientation
77
13
50 33
.150 (3.81)
21 SOCKET
76
12
49 32
.100 (2.54) TYP
24
.100 (2.54) TYP
.100 (2.54) TYP .050 (1.27) TYP 17
5
48 31
1.500 (38.10)
CL
13
11
30
.050 (1.27) TYP 17
15
1.450(36.8)
12
29
47
CL
.050 (1.27)
15 SOCKET
.050 (1.27)
28
46
1.800 (45.72)
CL
11
45
51 SOCKET
1.150 (29.21)
10
44 27
9 SOCKET
9
.100 (2.54) TYP
88 63
38 12
64 39
13
89
90 65
40 14
91 66
41 15
92 67
42 16
93 68
43 17
94 69
44 18
95 70
45 19
96 71
46 20
97 72
73 48
47 21
98
22
99 74
49 23
100 75
50 24
51 25
26
100 SOCKET © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-9 E-Mail:
[email protected]
C
Micro-D PCB
Micro-D MWDM-BR Right Angle Thru-Hole
Printed Circuit Board Connectors High Performance – These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance.
C
Rear Mountable – Can be installed through panels up to .125 inch thick. Specify rear panel mount jackposts.
How To Order Micro-D BR Style Board Mount Connectors Sample Part Number
MWDM
2
l
-15
p
br
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-filled liquid crystal polymer PPS - 40% Glass-filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 100 (See Table II)
Contact Type
P - Pin S - Socket
Termination Type
BR - Board Right Angle
Jackpost Option
Omit for None P - Jackpost Jackposts for Rear Panel Mounting R1 - .032” Panel R2 - .047” Panel R3 - .062” Panel (See Table I) R4 - .093” Panel R5 - .125” Panel R6 - .080" Panel
Threaded Insert Option
T - Threaded Insert In Board Mount Hole Omit - for Thru-Hole
r3
T
-.110
513
Stainless Steel Shell 3 - Passivated
Printed Circu Connect
Terminal Length (Inches)
.080, .110, .125, .140, .150, .172, .190, .250 Length in Inches ± .015 (0.38) (See Table II)
Gold-Plated Terminal Mod Code
These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
Table I: Jackpost Options No Designator
P
R1 Thru R6 Panel
THREADED INSERT
Thru-Hole For use with Glenair jackposts only. Order hardware separately. Install with threadlocking compound.
© 2013 Glenair, Inc.
Standard Jackpost Factory installed, not intended for removal.
High Performance Micro-D Connectors and Cables
Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compund.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-10 E-Mail:
[email protected]
uit Board tors
Micro-D PCB
Micro-D MWDM-BR Right Angle Thru-Hole
Printed Circuit Board Connectors Table II: Dimensions A F B C E
D .020 (0.5) ± .002 (0.1 ) F
H
C
Tail Length ± .015 (0.38)
J K
G
2 X PCB MTNG HOLES 9-51 CONTACTS .096 ± .005 (2.43 ± 0.13) 100 CONTACTS .125 ± .005 (23.18 ± 0.13)
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
In. 1.390 1.390 1.540 1.540 1.690 1.690 1.790 1.790 2.040 2.040 2.340 2.340 1.875 1.875 2.780 2.780
B
C Max.
In. mm. mm. ±.003 ± 0.08 35.31 35.31 39.12 39.12 42.93 42.93 45.47 45.47 51.82 51.82 59.44 59.44 47.63 47.63 70.60 70.60
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
D Max.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46
E Max. In.
F
G Max.
In. mm. mm. ±.007 ± 0.18
.310 7.87 1.150 .310 7.87 1.150 .310 7.87 1.300 .310 7.87 1.300 .310 7.87 1.450 .310 7.87 1.450 .310 7.87 1.550 .310 7.87 1.550 .310 7.87 1.800 .310 7.87 1.800 .310 7.87 2.100 .310 7.87 2.100 .351 8.92 1.600 .351 8.92 1.600 .394 10.01 2.500 .394 10.01 2.500
29.21 29.21 33.02 33.02 36.83 36.83 39.37 39.37 45.72 45.72 53.34 53.34 40.64 40.64 63.50 63.50
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
© 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
H
J
K
In. mm. In. mm. In. mm. mm. ±.003 ±0.08 ±.015 ±0.38 ±.010 ±0.25
In. .465 .465 .465 .465 .465 .465 .465 .465 .465 .465 .465 .465 .565 .565 .765 .765
11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 14.35 14.35 19.43 19.43
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .225 .225
3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 5.72 5.72
.150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150
3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-11 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-BR Right Angle Thru-Hole
Printed Circuit Board Connectors
MICRO-D BR Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter 1.150 (29.21)
C
.150 (3.81) 9
.100 (2.54) TYP
7
4
CL
.050 (1.27) TYP 51
6
3
2
50
35
1
.375 (9.53)
.100 (2.54) TYP
18
34
49 33
17
48 32
16
47
46
31
15
30
14
45
44
29
13
43
28
12
11
9
8
7
6
12 5
11 4
10 3
2
16
1
.300 (7.62)
10
19 9
18 8
17 7
4
3
19 2
.050 (1.27)
1
.100 (2.54) TYP
30 15
29 14
28
27
13
12
26 11
25 10
24 9
23 8
21
22 7
6
20 5
19 4
18 3
17 2
1
.150 (3.81)
.100 (2.54) TYP
31 PIN 1.550 (39.37) .150 (3.81)
CL
20
5
36 20
.050 (1.27) TYP 31
9
15 PIN
21
6
21
22
CL
1.450(36.8)
.150 (3.81)
7
37
38
23
.150 (3.81)
.150 (3.81)
.100 (2.54) TYP
8
39
24
51 PIN
.100 (2.54) TYP .050 (1.27) TYP 13
40
25
1.800 (45.72)
CL
14
41
26
10
9 PIN
15
42
27
1.300 (33.02)
11
.100 (2.54) TYP
.100 (2.54) TYP .050 (1.27) TYP
8
5
1.600 (40.64)
.150 (3.81)
CL
CL
.100 (2.54) TYP .050 (1.27) TYP 16
6
15 5
14 4
.100 (2.54) TYP
13 3
12 2
.225 (5.72)
25 1
13
24 12
23 11
.100 (2.54) TYP
21
22 10
9
.100 (2.54) TYP .050 (1.27) TYP
20 8
19 7
21 PIN
18 6
17 5
16 4
15 3
14 2
.175 (4.45)
1
25 PIN 2.100 (53.34)
.150 (3.81) CL
.100 (2.54) TYP .050 (1.27) TYP
37 19
36 18
35 17
34 16
.100 (2.54) TYP
33 15
32
31
14
13
30 12
29 11
28
27
10
9
26 8
25 7
24 6
23 5
21
22 4
3
20 2
.150 (3.81)
1
37 PIN 2.500 (63.50) CL
.150 (3.81)
.100 (2.54) TYP .050 (1.27) TYP
100
.100 (2.54) TYP
99
75 51 26
98 74
50 25
97 73
49 24
96 72
48 23
95 71
47 22
94 70
46 21
93 69
45 20
92 68
44 19
91 67
43 18
66 42
17
90
89 65
41 16
88 64
40 15
87 63
39 14
86 62
61 37
38 13
85
12
84 60
36 11
83 59
35 10
82 58
34 9
57 33
8
.050
81
80 56
32 7
79 55
31 6
78 54
30 5
77 53
29 4
76 52
28 3
27 2
1
100 PIN © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-12 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-BR Right Angle Thru-Hole
Printed Circuit Board Connectors
MICRO-D BR Board Mount Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter
CL
.150 (3.81) 6
8
2
CL
.100 (2.54) TYP .050 (1.27) TYP
7
1
.100 (2.54) TYP
1.600 (40.64)
.150 (3.81)
1.150 (29.21)
.050 (1.27) TYP 36
9
3
4
19
5
.100 (2.54) TYP
.375 (9.53)
1
9 SOCKET
37 20
2
38 21
3
39 22
4
40 23
41 24
5
6
42 25
7
43
8
27 9
1
2
12
3
13
4
12
5
1
2
3
15 4
12
13
49 32
14
50 33
15
C
51 34
16
.050 (1.27)
35 17
18
14
15
6
7
1
8
.300 (7.62)
18
19
2
20
3
21
4
22
5
23
6
5
24
7
25
8
26
9
10
27 11
28 12
29 13
30 14
31 15
16
.150 (3.81)
.100 (2.54) TYP
31 SOCKET 1.550 (39.37)
.150 (3.81)
.100 (2.54) TYP .050 (1.27) TYP
16
.100 (2.54) TYP .050 (1.27) TYP
17
CL
14
48 31
CL
1.450(36.8)
13
11
30
51 SOCKET
15 SOCKET .150 (3.81)
29
47
.150 (3.81)
.150 (3.81)
.100 (2.54) TYP
28
46
1.800 (45.72) .100 (2.54) TYP .050 (1.27) TYP
11
45
10
CL
10
44
26
1.300 (33.02)
9
.100 (2.54) TYP
17 6
18 7
19 8
.100 (2.54) TYP
20 9
CL
21 10
14
11
.225 (5.72)
15
1
16
2
17
3
18
4
.100 (2.54) TYP
.050 (1.27) TYP
19
5
20
6
21 SOCKET
.100 (2.54) TYP 21
7
8
22 9
23 10
24 11
25 12
.175 (4.45)
13
25 SOCKET 2.100 (53.34)
.150 (3.81) CL
.100 (2.54) TYP .050 (1.27) TYP
20 1
21 2
22 3
23 4
.100 (2.54) TYP
24 5
25 6
26 7
27 8
28 9
29 10
30 11
32
31 12
13
33 14
34 15
35 16
36 17
37 18
.150 (3.81)
19
37 SOCKET 2.500 (63.50) CL
.150 (3.81)
.100 (2.54) TYP .050 (1.27) TYP
76
.100 (2.54) TYP
77 52
27 1
78 53
28 2
79 54
29 3
80 55
30 4
81 56
57 32
31 5
82
6
83 58
33 7
84 59
34 8
85 60
35 9
86 61
36 10
87 62
37 11
88 63
38 12
89 64
39 13
90 65
40 14
91 66
41 15
92 67
42 16
93 68
43 17
94 69
44 18
70 45
19
.050
95
96 71
46 20
97 72
73 48
47 21
98
22
99 74
49 23
100 75
50 24
51 25
26
100 SOCKET © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-13 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount
Printed Circuit Board Connector High Performance – These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance.
C
Rear Mountable – Can be installed through panels up to .125 inch thick. Specify rear panel mount jackposts.
How To Order CBS Style PCB Micro-D Connectors Sample Part Number
mwdm
Series
MWDM - MIcro-D Metal Shell
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film Stainless Steel Shell 3 - Passivated
Insulator Material
L - LCP or PPS LCP - 30% Glass-filled liquid crystal polymer PPS - 40% Glass-filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 69, 75, 100, 130 (See Table I)
Contact Type
P - Pin S - Socket
Termination Type
CBS - Condensed Board Straight
Hardware Option
NN – No Jackpost, No Threaded Insert PN – Extended Jackpost for .062" (1.6) PCB, No Threaded Insert RN – Extended Jackpost for .196" (5.0) PCB, No Threaded Insert NU – Threaded Insert Only, No Jackposts PU – Short Jackpost and Threaded Insert
1
l-
Rear Panel Jackposts With Threaded Inserts R7U – .080" (2.0) Panel R6U – .125" (3.2) Panel R5U – .094" (2.4) Panel R4U – .062" (1.6) Panel R3U – .047" (1.2) Panel R2U – .031" (0.8) Panel
PC Tail Length
.080, .110, .140, .172, .190, .250 Length in Inches ± .015 (0.38)
Gold-Plated Terminal Mod Code
These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
31
p
cbs
nn
-.110 513
Jackscrew Options M – Hex Head Jackscrews S – Slot Head Jackscrews
HARDWARE OPTIONS See Pages C-22 and C-23
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-14 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount
Printed Circuit Board Connector Table I: Dimensions F
A
TAIL LENGTH ± .015 (0.38)
B C E
.025 (0.6)
G
D
Ø .020 (0.51) ± .002 (0.05)
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 69P 69S 75P 75S 100P 100S 130P 130S
B
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.735 1.735 2.080 2.080 2.170 2.170 2.520 2.520
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 44.07 44.07 52.83 52.83 55.12 55.12 64.00 64.00
C Max.
D Max.
± .005
mm. ± 0.13
In .
mm.
In .
mm.
In .
mm.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.515 1.515 1.705 1.705 1.800 1.800 2.150 2.150
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 38.48 38.48 43.31 43.31 45.72 45.72 54.61 54.61
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.284 1.50 1.384 1.450 1.383 1.451 1.735 1.795
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 32.61 34.29 35.15 36.83 35.13 36.86 44.07 45.59
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .224 .293 .228 .296 .270 .333 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 5.69 7.44 5.79 7.52 6.86 8.46 6.86 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .400 .400 .400 .400 .400 .400 .510 .510 .510 .510
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 10.16 10.16 10.16 10.16 10.16 10.16 12.95 12.95 12.95 12.95
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
© 2013 Glenair, Inc.
E Max.
In .
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
F
G Max.
In .
± .003
mm. ± 0.08
In .
mm.
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .430 .430 .430 .430
9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 10.92 10.92 10.92 10.92
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-15 E-Mail:
[email protected]
C
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount Hardware
MICRO-D CBS Board Mount Connector Hardware Options
C
A DIAMETER 9-69 CONTACTS .096/.088 (2.44/2.24) 75, 100, 130 CONTACTS .150/.145 (3.81/3.68)
9-69 CONTACTS NO. 2-56 UNC-2B 75-130 CONTACTS NO. 4-40 UNC-2B
A
NN Style
NU Style
Thru-Hole, No Hardware
Threaded Insert
9 – 69 Contacts
75 – 130 Contacts
.125 (3.2) HEX
2-56 UNC-2B
.185 / .175 (4.7 / 4.5)
.190 / .185 (4.8 / 4.7)
.190 (4.8) MAX.
2-56 UNC-2A
.160 (4.1) MIN. (9-69 PINS) .225 (5.7) MIN. (75 - 130 PIN)
PU Style
.187 (4.8) HEX
4-40 UNC-2B
.190 (4.8) MAX.
4-40 UNC-2A
Kit Part Number 500-063-1
Kit Part Number 500-063-2
Kit Consists of Two Jackposts
Kit Consists of Two Jackposts
9 – 69 Contacts
75 – 130 Contacts
Jackpost with Threaded Insert
.156 (4.0) DIA .188 ± .005 (4.8 ± 0.13) .380/.350 (9.65/8.89)
A
.187 (4.7) DIA
.050 (1.3)
.180 ± .005 (4.6 ± 0.13)
.086 (2.2)-56 UNC-2B
.375/.345 (9.53/8.76)
.119 (3.0)
.050 (1.3)
A
.140 (3.6) .112 (2.8)-40 UNC-2A
.086 (2.2)-56 UNC-2A
.160 (4.1) MIN. (9-69 PINS) .225 (5.7) MIN. (75 - 130 PINS)
RU Style Jackpost For Rear Panel Mounting, with Threaded Insert
© 2013 Glenair, Inc.
Hardware Panel Option Thickness
Part Number
.112 (2.8)-40 UNC-2B
A ± .003 (0.08)
Hardware Panel Option Thickness
Part Number
A ± .003 (0.08)
R2U
1/32 (0.8)
177-505-A-2-2
.024 (0.6)
R2U
1/32 (0.8)
177-505-D-4-2
.024 (0.6)
R3U
3/64 (1.2)
177-505-A-2-3
.041 (1.0)
R3U
3/64 (1.2)
177-505-D-4-3
.041 (1.0)
R4U
1/16 (1.6)
177-505-A-2-4
.055 (1.4)
R4U
1/16 (1.6)
177-505-D-4-4
.055 (1.4)
R5U
3/32 (2.4)
177-505-A-2-5
.086 (2.2)
R5U
3/32 (2.4)
177-505-D-4-5
.086 (2.2)
R6U
1/8 (3.2)
177-505-A-2-6
.118 (3.0)
R6U
1/8 (3.2)
177-505-D-4-6
.118 (3.0)
R7U
5/64 (2.0)
177-505-A-2-7
.073 (1.9)
R7U
5/64 (2.0)
177-505-D-4-7
.073 (1.9)
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-16 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount Hardware
MICRO-D CBS Board Mount Connector Hardware Options 9 – 69 Contacts .190 / .185 (4.8 / 4.7) PN .595/.565 (15.1/14.4) RN .685/.655 (17.4/16.6)
PC BOARD
PN Style for .062" PCB RN Style for .196" PCB Jackpost Kit
.125 (3.2) HEX
2-56 UNC-2A LOCKWASHER NUT .154 (3.9) HEX
PN Kit Part Number 500-069-2-6 RN Kit Part Number 500-069-2-7 Kit Consists of 2 Jackposts, 2 Nuts, 2 Washers
9 – 69 Contacts .063 HEX
75 - 130 Contacts 4-40 UNC-2B
2-56 UNC-2B
.125 (3.2) DIA.
.185 / .175 (4.7 / 4.4) PN .685/.655 (17.4/16.6) RN .785/.755 (19.9/19.2)
.084 (2.1)
Kit Consists of 2 Jackposts, 2 Nuts, 2 Washers
75 - 130 Contacts .063 HEX
Kit Part Number 500-080-2
Kit Consists of 2 Jackscrews and 2 E-Rings
9 – 69 Contacts
.027 (0.7) SLOT
.125 (3.2) DIA.
.140 (3.6) .606 (15.4) E-RING
4-40 UNC-2A
Kit Part Number 500-080-4
Kit Consists of 2 Jackscrews and 2 E-Rings
75 - 130 Contacts
.035 (0.9) SLOT
.084 (2.1)
.140 (3.6) .606 (15.4) E-RING
E-RING
S Style
© 2013 Glenair, Inc.
4-40 UNC-2A
2-56 UNC-2A
Slot Head Jackscrew with E-Ring
Kit Part Number 500-081-2
Kit Consists of 2 Jackscrews and 2 E-Rings
High Performance Micro-D Connectors and Cables
.187 (4.7) DIA. .098 (2.5)
.085 (2.2) .503 (12.8)
.187 (4.7) DIA. .098 (2.5)
2-56 UNC-2A
Hex Head Jackscrew with E-Ring
LOCKWASHER NUT
PN Kit Part Number 500-069-4-7 RN Kit Part Number 500-069-4-8
E-RING
M Style
4-40 UNC-2A
.187 (4.7) HEX
.085 (2.2) .503 (12.8)
.187 (4.7) HEX
Kit Part Number 500-081-4
Kit Consists of 2 Jackscrews and 2 E-Rings
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-17 E-Mail:
[email protected]
C
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount PCB Layouts
MICRO-D CBS Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board.
C
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.075 (1.91) 8
.038 (0.96) REF
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP
9 5
7
6
3
4 2 .200 (5.08) .565 (14.35)
.075 (1.91)
.183(4.65) TYP
14 12 10
.225(5.72)
1
8
9 PIN .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.075 (1.91) 20 18 16 14 12 21 19 17 15 13 11 9 7 5 3 1 10 8 6 4 2 .500 (12.7) REF
24 22 25 13
.038 (0.96) REF
23 11
12
.096 (2.44) DIA TYP
20
21
7
9 10
18 19
8
16 17
5 6
.600(15.24) REF
14
3 4
.225 (5.72)
15 1 2
.096 (2.44) DIA TYP
.965 (24.5)
21 PIN
.038 (0.96) REF
.096 (2.44) DIA TYP
.075 (1.91)
.225 (5.72)
.865 (21.97)
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
1
15 PIN
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.038 (0.96) REF
.225 (5.72)
9 2
7 5 3 .350(8.89) REF .715 (18.16)
.038 (0.96) REF
.096 (2.44) DIA TYP
15 13 11 6 4
25 PIN .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.075 (1.91) 30 28 26 24 22 20 18 31 29 27 25 23 21 19 17 16 14 12 10 8 6 4 2 15 13 11 9 7 5 3 1 .750(19.05) REF 1.115 (28.32)
.075 (1.91) 36 34 32 30 28 26 24 22 20 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
.225 (5.72)
.038 (0.96) REF
.096 (2.44) DIA TYP
18 16 14 12 10 8 6 .900(22.86) REF 1.265 (32.13)
31 PIN
4
2
.225 (5.72) .096 (2.44) DIA TYP
37 PIN .075 (1.91) TYP .0375 (0.95) TYP .096 (2.44) DIA TYP
.075 (1.91)
51 49 46 44 42 41 39 38 37 36 50 48 47 45 43 25 40 22 21 19 35 33 31 30 29 27 26 24 23 20 1 34 32 14 12 28 9 8 6 4 2 18 17 16 15 13 11 10 7 5 3 .2325 (5.91) TYP
(.750)(19.05) 1.215 (30.86)
51 PIN © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-18 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount PCB Layouts
MICRO-D CBS Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. .0375 (.95) 4X.075 (1.91)
.075 (1.91) TYP 69 67 66 65 64 63 62 60 58 56 54 52 50 48 68 44 42 40 38 36 61 59 57 55 53 51 49 47 45 43 41 39 37 35 34 33 31 30 28 27 26
46 22 20 18 16 14 12 10 32
.075 (1.91) TYP
24 23 21 19 17 15 13 11
.251 (6.38)
7 9
29 4 8
6
2 5
3
C
.096 (2.44) DIA TYP
25 1
1.515 (38.48)
69 PIN .037 (.94) .075 (1.91) 75 73 70 68 67 66 65 64 63 61 59 57 55 53 50 74 71 69 44 42 40 38 36 62 60 58 56 54 52 51 49 72 46 45 43 41 39 37 35 34 32 31 29 28 27 26 48 47 22 20 18 16 14 12 10 33 7 30 4 2 25 24 23 21 19 17 15 13 11 9 8 6 5 3 1
.309 (7.85)
4X.075 (1.91)
1.705 (43.31)
.125 (3.18) DIA TYP
75 PIN 1.800 (45.72) .040 (1.016) DIA TYP 99 97 96 94 93 91 90 88 87 85 84 82 81 79 78 76 75 98 72 95 69 92 66 89 63 86 60 83 57 80 54 77 100 74 73 71 70 68 67 65 64 62 61 59 58 56 55 53 52 51 49 48 46 45 43 42 40 39 37 36 34 33 31 30 28 27 26 50 23 47 20 44 17 41 14 38 11 35 8 32 5 29 2 .125 (3.18) DIA TYP
.1875 (4.76)
25 24 22 21 19 18 16 15 13 12 10 9 7 6 4 3 1 .0375 (0.95) TYP .075 (1.91) TYP .075 (1.91)
.2812 (7.14)
100 PIN .0375 (.95) .075 (1.91)
.125 (3.18) DIA TYP
5X.075 (1.91)
128 127 126 124 123 121 120 118 117 115 114 112 111 109 108 106 105 103 102 100 99 129 96 94 125 91 122 88 119 85 116 82 113 79 110 76 107 73 104 70 101 67 130 97 95 93 92 90 89 87 86 84 83 81 80 78 77 75 74 72 71 69 68 66 98 64 62 61 59 58 56 55 53 52 50 49 47 46 44 43 41 40 38 37 35 34 65 32 63 29 60 26 57 23 54 20 51 17 48 14 45 11 42 33 31 30 28 27 25 24 22 21 19 18 16 15 13 12 10
8 9
2.150 (54.61)
39 5 7
6
36 2 4
3 1
.1875 (4.76) .269 (6.83)
130 PIN © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-19 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount PCB Layouts
MICRO-D CBS Board Mount Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board.
C
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP
.075 (1.91) 7 6 1
.038 (0.96) REF
9 8 3
2 4 .200 (5.08) .565 (14.35)
.075 (1.91)
.183(4.65) TYP
10 12 14
.225(5.72) .038 (0.96) REF
.096 (2.44) DIA TYP
9 SOCKET
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
13 15 17 19 21 12 14 16 18 20 1 3 5 11 2 4 6 8 10 .500 (12.7) REF
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.038 (0.96) REF .096 (2.44) DIA TYP
18 20 22 24 26 28 30 17 19 21 23 25 27 29 31
038 (0.96) REF
2
5
7
8
9
.096 (2.44) DIA TYP
.075 (1.91)
1
17 16
3 2
19 18
5 4
21 20 9
7 6
8
25
23 22
.600(15.24) REF
24 11
10
.225 (5.72)
13
12
.096 (2.44) DIA TYP
25 SOCKET
.075 (1.91)
3
2 4 6 .350(8.89) REF .715 (18.16)
.225 (5.72)
.965 (24.5)
21 SOCKET
1
15 7
15 14
.225 (5.72)
.865
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
9
15 SOCKET
.075 (1.91)
.038 (0.96) REF
11 13 3 5
1
5
.225 (5.72)
13 15 4 6 8 10 12 14 16 .750(19.05) REF 1.115 (28.32)
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
11
.096 (2.44 DIA TYP
31 SOCKET
.038 (0.96) REF
.075 (1.91) 21 23 25 27 29 31 33 35 37 20 22 24 26 28 30 32 34 36 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 .900(22.86) REF 1.265 (32.13)
.225 (5.72) .096 (2.44) DIA TYP
37 SOCKET
.075 (1.91) TYP .0375 (0.95) TYP .096 (2.44) DIA TYP
.075 (1.91)
36 37 39 40 42 44 45 47 48 50 20 38 23 41 43 28 46 31 49 51 19 21 22 24 26 27 29 30 32 34 35 2 4 6 25 9 11 12 14 33 17 1 .2325 (5.91) TYP
3
5 7 8 10 13 15 16 18 (.750)(19.05) 1.215 (30.86)
51 SOCKET
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-20 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBS Vertical Board Mount PCB Layouts
MICRO-D CBS Board Mount Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. .0375 (.95) 4X.075 (1.91)
.075 (1.91) TYP 48 50
52 54 56 58 60 62 63 64 65 66 67 69
C
49 51 53 55 57 59 61 36 38 40 42 44 68 26 27 28 30 31 33 34 35 37 39 41 43 45 47
.075 (1.91) TYP
9 11 13 15 17 19 21 23 24
8
6
5
3
1
.096 (2.44) DIA TYP
4 29 7 32 10 12 14 16 18 20 22 46
2
25
.251 (6.38)
1.515 (38.48)
69 SOCKET .037 (.94) .075 (1.91) 53 55 57 59 61 63 64 65 66 67 68 70 73 75 52 54 56 58 60 62 36 38 40 42 44 69 71 74 50 27 28 29 31 32 34 35 37 39 41 43 45 46 72 49 51 2 4 30 7 33 10 12 14 16 18 20 22 47 48 26 1
3
5 6
8
9 11 13 15 17 19 21 23 24 25
.309 (7.85)
4X.075 (1.91)
1.705 (43.31)
2Xø.125 (3.18)
75 SOCKET 1.800 (45.72 )
77
76
79 78
52 53
54 29
27
56
4 3
2
82 81
30
28
1
80 55
57 32
31 5
83
85 84
58 59 33 7
60 35
34
6
8
86
88
62
9
38 37
11
65 39
13 12
91
92
90
64 63
36 10
89
87
61
66 41
40 14
68 42
16 15
94
44
71 45
19 18
97 96
70 69
43 17
95
93
67
72 47
46 20
98
74 48
22 21
100
.1875 (4.76)
99
73
75 50
49 23
51 25
24
26
.0375 (0.95) TYP
.125 (3.18) DIA TYP
.075 (1.91) TYP
.075 ( 1.91 )
.2812 (7.14)
100 SOCKET .0375 (.95) 2Xø.125 (3.18)
5X.075 (1.91)
.075 (1.91)
100 102 103 105 106 108 109 111 112 114 115 117 118 120 121 123 124 126 127 129 130 99 101 70 104 73 107 76 110 79 113 82 116 85 119 88 122 91 125 94 128 66
67 69 71 72 74 75 34 68 37 38
1 35 2
36 3
5 4
40 41 43 44 46 39
6
77 78 80 81
8 7
42 11 45 14 9
10
83 84 86
47 49
50
52 53 55
48 17 51 20
12 13 15 16
87 89 90 92 93
18 19
56 58 59
54 23 57 21 22 24 25
97
95 96 98 61 62 64 65
26 60 29
63 32
27 28 30 31 33
.1875 (4.76) .269 (6.83)
2.150 (54.61)
130 SOCKET
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-21 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBR Right Angle Thru-Hole
Printed Circuit Board Connectors High Performance – These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance.
C
Rear Mountable – Can be installed through panels up to .125 inch thick. Specify rear panel mount jackposts. How To Order CBR Style PCB Micro-D Connectors Sample Part Number
Mwdm
2
l
-15
p
cbr
r3
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Insulator Material
L - LCP or PPS LCP - 30% Glass-filled liquid crystal polymer PPS - 40% Glass-filled polyphenylene sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51, 69, 75, 100, 130 (See Table II)
Contact Type
P – Pin S – Socket
Termination Type
CBR - Condensed Board Right Angle
Jackpost Option
(Omit for None) P – Jackpost Jackposts for Rear Panel Mounting R1 – .032” Panel R2 – .047” Panel R3 – .062” Panel (See Table I) R4 – .093” Panel R5 – .125” Panel R6 – .080" Panel
Threaded Insert Option
T - Threaded Insert In Board Mount Hole Omit for Thru-Hole
Terminal Lentgth in Inches
.080, .110, .125, .140, .150, .172, .190, .250 Length in Inches ± .015 (0.38)
Gold-Plated Terminal Mod Code
These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
t
-.110 513
Stainless Steel Shell 3 - Passivated
Table I: Jackpost Options No Designator
P
R1 Thru R6 Panel
THREADED INSERT
Thru-Hole For use with Glenair jackposts only. Order hardware separately. Install with threadlocking compound. © 2013 Glenair, Inc.
Standard Jackpost Factory installed, not intended for removal.
High Performance Micro-D Connectors and Cables
Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compound.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-22 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBR Right Angle Thru-Hole
Printed Circuit Board Connectors Table II: Dimensions CONFIGURATION FOR 9-25 CONTACTS F A B C E
H
Tail Length ± .015 A Max.
B C Max. In. mm. In. mm. In. mm. ±.003 ± 0.08 .787 19.94 .565 14.35 .333 8.46 .787 19.94 .565 14.35 .400 10.16 .937 23.75 .715 18.16 .483 12.27 .937 23.75 .715 18.16 .551 14.00 1.087 27.56 .865 21.97 .633 16.08 1.087 27.56 .865 21.97 .701 17.81 1.187 30.01 .965 24.51 .733 18.62 1.187 30.01 .965 24.51 .801 20.35 1.337 33.91 1.115 28.32 .883 22.43 1.337 33.91 1.115 28.32 .951 24.16 1.487 37.72 1.265 32.13 1.033 26.24 1.487 37.72 1.265 32.13 1.101 27.96 1.435 36.45 1.215 30.86 .983 24.97 1.435 36.45 1.215 30.86 1.051 26.70 1.740 44.20 1.515 38.48 1.283 32.59 1.740 44.20 1.515 38.48 1.351 34.32 2.080 52.83 1.705 43.31 1.384 35.15 2.080 52.83 1.705 43.31 1.450 36.83 2.175 55.12 1.800 45.72 1.383 35.13 2.175 55.12 1.800 45.72 1.451 36.86 2.520 64.01 2.150 54.61 1.735 44.07 2.520 64.01 2.150 54.61 1.735 44.07
G
2X MOUNTING HOLES PCB MOUNTING HOLES 9-51 CONTACTS .096 DIA. ± .003 (2.44 ± 0.08) 100 CONTACTS .125 DIA. ± .003 (3.18± 0.08) 75-130 .125 DIA ± .003 (3.18± 0.08)
9-51 CONTACTS �#2-56 UNC-2B THREADS 100 CONTACTS �#4-40 UNC-2B THREADS
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 69P 69S 75P 75S 100P 100S 130P 130S
H J
G
D
Layout
CONFIGURATION FOR 31-130 CONTACTS
D Max.
E Max.
In.
mm.
In.
mm.
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .228 .296 .228 .296 .270 .333 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 5.79 7.52 5.79 7.52 6.86 8.46 6.86 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .351 .351 .351 .351 .394 .394 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 8.92 8.92 8.92 8.92 10.01 10.01 10.01 10.01
L
F G Max. H J In. mm. In. mm. In. mm. In. mm. ±.003 ± 0.08 ±.010 ±0.25 ±.010 ±0.25 .183 4.65 .425 10.80 .230 5.84 .250 6.35 .195 4.95 .425 10.80 .230 5.84 .250 6.35 .183 4.65 .425 10.80 .130 3.30 .250 6.35 .195 4.95 .425 10.80 .130 3.30 .250 6.35 .183 4.65 .425 10.80 .130 3.30 .250 6.35 .195 4.95 .425 10.80 .130 3.30 .250 6.35 .183 4.65 .425 10.80 .130 3.30 .250 6.35 .195 4.95 .425 10.80 .130 3.30 .250 6.35 .183 4.65 .525 13.34 .130 3.30 .250 6.35 .195 4.95 .525 13.34 .130 3.30 .250 6.35 .183 4.65 .525 13.34 .130 3.30 .250 6.35 .195 4.95 .525 13.34 .130 3.30 .250 6.35 .183 4.65 .660 16.76 .150 3.81 .300 7.62 .195 4.95 .660 16.76 .150 3.81 .300 7.62 .183 4.65 .750 19.05 .150 3.81 .300 7.62 .195 4.95 .750 19.05 .150 3.81 .300 7.62 .183 4.65 .800 20.32 .200 5.08 .400 10.16 .195 4.95 .800 20.32 .200 5.08 .400 10.16 .183 4.65 1.010 25.65 .200 5.08 .400 10.16 .195 4.95 1.010 25.65 .200 5.08 .400 10.16 .183 4.65 1.010 25.65 .200 5.08 .400 10.16 .195 4.95 1.010 25.65 .200 5.08 .400 10.16
© 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
K Max. In. –– –– –– –– –– –– –– –– .450 .450 .450 .450 .450 .450 .450 .450 .590 .590 .590 .590 .620 .620
mm.
L Max. In.
–– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 11.43 1.085 11.43 1.085 11.43 1.185 11.43 1.185 11.43 1.225 11.43 1.225 11.43 1.530 11.43 1.530 14.99 1.650 14.99 1.650 14.99 1.820 14.99 1.820 15.75 2.160 15.75 2.160
mm. –– –– –– –– –– –– –– –– 27.56 27.56 30.10 30.10 31.12 31.12 38.86 38.86 41.91 41.91 46.23 46.23 54.86 54.86
Materials and Finishes
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
J
K
Aluminum Alloy 6061 or Stainless Steel, 300 Series, Connector Shell passivated. See Ordering Info for Plating Options Insulator, Tray
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-23 E-Mail:
[email protected]
C
Micro-D PCB
Micro-D MWDM-CBR Right Angle Thru-Hole
Printed Circuit Board Connectors
MICRO-D CBR Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 69 Contacts .096 (2.44) Diameter Mounting Holes, 75-130 Pin .125 (3.18) Diameter
.050 (1.27)
C
CONNECTOR FLANGE
.100 (2.54) .100 (2.54)
.050 (1.27)
.250 (6.35) 1
2
6
4
7
CONNECTOR FLANGE
.100 (2.54) 2X.100 (2.54) 2
5
3
8
4
1
9 9
.020 (.51)
.083 (2.11)
11
3
5
14
12
6
4
13
15
16
10
7 18
13
14
15
.020 (.51)
15 PIN
8
17
.250 (1.27) 8
.715 (18.16)
.050 (1.27)
CONNECTOR FLANGE
2
6
.109 (2.77)
9 PIN
1
7
12
10
.565 (14.35)
.050 (1.27) .100 (2.54) 2X.100 (2.54)
5
3
9
.250 (6.35)
CONNECTOR FLANGE
.100 (2.54) 2X.100 (2.54) 2
11
19
1
20
3
21
6
17
14
.020 (.51)
.083 (2.11)
4
15 16
8
5
7
18
19
10
11
9
22
20
21
12 24
23
.250 (6.35) 13
25
.083 (2.11)
.865 (21.97)
.020 (.51)
.965 (24.51)
21 PIN
25 PIN
.050 (1.27)
.050 (1.27)
CONNECTOR FLANGE
.100 (2.54) 3X.100 (2.54)
2
4
1
6
3
8
5
17
19 18
7 21
20
9 24
23
11 10
25
22
13
12 27
26
15 14
29 28
.100 (2.54) .250 (6.35)
CONNECTOR FLANGE
3X.100 (2.54)
1
16
3
5
2
30
20
31
.020 (.508)
.158 (4.01) 1.115 28.32
7
4 22
21
9
6 24
23
26
25
.183 (4.65)
11
8
10 28
13 12
29
27
15 14
31 30
17 16
33 32
19
.250
18 35
34
37 36
.020
1.265 (32.13)
31 PIN
37 PIN .050 (1.27) .100 (2.54) TYP
.050 (1.27)
2 1 19
4X.100 (2.54)
6
3 21
20 36
4
25 24
38
27
7
23 22
37
5
8 9 41 26
39
10 43
42 40
11 12 46 45
44
13
15 14
29 28
47
31 30
48
49
.300 (7.62)
18 33
32 50
51
1 2
3 4
25
35
34
.050 (1.27)
1.215 (30.86)
51 PIN High Performance Micro-D Connectors and Cables
5 6
27 26
49
7 8 31 30
53 50
9 10
29 28
51 48
.108 (2.74)
© 2013 Glenair, Inc.
.100 (2.54) TYP
.300 (7.62)
17 16
CONNECTOR FLANGE
.183 (4.65)
CONNECTOR FLANGE
.100 (2.54)
33 32
55 52
11 12 35 34
57 54
13 14 37
36 59
56
15 18 39 38
61 58
17
16
41 40
63 60
19 20 43 42
65 62
21 24 45 44
67 64
23
22
46
47
.050 (1.27)
69 66
68
1.515 (38.48)
69 PIN U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-24 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBR Right Angle Thru-Hole
Printed Circuit Board Connectors
MICRO-D CBR Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 69 Contacts .096 (2.44) Diameter Mounting Holes, 75-130 Pin .125 (3.18) Diameter
CONNECTOR FLANGE 1
3
2
5
4
7
6
27
8
29 28
52
31 32
54
56 55
58
13 14
35 34
57
11 12
33
30
53
9 10
37 36
60
59
62
41
40 64
63
17 18
39 38
61
15
16
43 42
66 65
19
21
20
22 45
67
46 70
69
49 48
72
71
26
.400 (10.16)
25
47
44 68
23 24
C
.200 (5.08)
51 50
2XØ.125 (3.18)
74 73
75
.100 (2.54) TYP .228 (5.79) .050 (1.27) TYP 1.705 (41.31)
5X.100 (2.54)
75 PIN CONNECTOR FLANGE
.025
1
.400 (10.16)
3
5
2 27
76
78
56 80
79
37
34
58 82
81
38
59
61 60
84
83
86
17 16
41 40
63
62
85
15 14
39
36
57
13 12
35
32 55
54
77
10
33
30
11
8
31
53 52
9
6
29 28
7X.100 (2.54)
7
4
88
42
45 46 69 68
90
92 91
94
50
73
72 96
26
51
48
95
25
24 49
71 70
93
23
22 47
44 67
66
89
21 20
43
65 64
87
19 18
75
74 98
97
100 99
.275 (6.99) .100 (2.54) TYP .100 (2.54) TYP 1.800 (45.72)
100 PIN CONNECTOR FLANGE
.400 (10.16)
1
3
5
2
4 35
37
34 66
7X.100 (2.54)
.275 (6.99)
36 68
67
9 8
70
11 10
39 38
69
100 99
7 6
41 40
72 71
102 104
43 42
74 73
13 12 45 44
76 75
106
101 103 105 107
15 17 14
16 47 49
46 78
77
19 18 51
48 80
79
21 20
50
83
25 24
53 52
82 84 81
23 22 55 54
86 85
57 56
88 87
115 117 119
59
90 89
29 28
58
108 110 112 11 4 116 118 120 122 109 111 113
27
26
63 62
94 93
124 126
33
32
61 60
92 91
31 30
65 64
96 95
98 97
128 130
121 123 125 127
129
.100 (2.54) TYP .050 (1.27) TYP 2.150 (54.61)
130 PIN
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-25 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBR Right Angle Thru-Hole
Printed Circuit Board Connectors
MICRO-D CBR Board Mount Connector PCB Layouts – Socket Connectors
Patterns shown are for connector mounting side of PC board. 9 Thru 69 Contacts .096 (2.44) Diameter Mounting Holes, 75-130 Pin .125 (3.18) Diameter
.050 (1.27)
CONNECTOR FLANGE
.100 (2.54)
C
.100 (2.54)
.050 (1.27)
.250 (6.35) 5
4
9
2
8
CONNECTOR FLANGE
.100 (2.54)
1
3
7
7
6
8 15
.020 (.058)
.083 (2.11)
5
4
6
2
12
14
13
.250 (6.35)
3
1
11
10
9
2X.100 (2.54)
.020 (.51)
.109 (2.77) .565 (14.35)
.715 (18.16)
9 SOCKET .050 (1.27)
15 SOCKET
10
8
11 21
6
9 20
5
7 19
3
17 18
2
4 16
.100 (2.54)
13
1
13
11
22 23
6
21
4
7
5
20
19
3
2
17 18
15 16
.250 (6.35) 1
14
.020 (.51)
.083 (2.11)
.020 (.51)
.965 (24.51)
21 SOCKET
25 SOCKET
CONNECTOR FLANGE
.100 (2.54)
.050 (1.27)
3X.100 (2.54)
15
13
16
11
14
30
9
12
29 31
10
27 28
25
8
6
24
7
23
26
4
2
5
21
22
3
19 20
.250 (6.35)
1
CONNECTOR FLANGE
.100 (2.54) 3X.100 (2.54)
19
17
17 18
18
37
.020 (.51)
.158 (4.03)
15
16
35 36
13
11
14 33
34
9
12 31
32
7
10 29
5
8 28
30
3
6
4
26 27
24 25
1
.250 (6.35)
2 22
23
20 21
.020 (.51)
.183 (4.65) 1.115 (28.32)
1.265 (32.13)
31 SOCKET
.050
37 SOCKET .050 (1.27) .100 (2.54) TYP .183 (4.65)
CONNECTOR FLANGE
.100 17 18 35
4X.100
8 9
2X.100 (2.54)
.865 (1.97)
.050 (1.27)
10
24 25
12
2X.100 (2.54) .083 (2.11)
12
.250 (6.35)
14 15
CONNECTOR FLANGE
.050 (1.27)
CONNECTOR FLANGE
.100 (2.54)
16 33
34 51
.108
15 14
11 12
31 32
50
13
29 30
49
8
10 46
28 48
27
47
9 43
45
6 7
5
41 42
44
25 26
40
4
23 24
39
.300
1 21
22 38
.300 (7.62)
2 3
19 20
37
36
23 24
21 22
47
.050
High Performance Micro-D Connectors and Cables
19 20
45 46
69
17 18
43 44
67 68
1.215
51 SOCKET © 2013 Glenair, Inc.
CONNECTOR FLANGE
41 42
65 66
15 16 39 40
63 64
13 14 37 38
61 62
11 12 35 36
59 60
9 10 33 34
57 58
7 8 31 32
55 56
5 6 29 30
53 54
3 4
52
1 2
27 28
51
.100 (2.54) TYP
25 26
.050 (1.27)
49 50
48
1.515 (38.48)
69 SOCKET U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-26 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-CBR Right Angle Thru-Hole
Printed Circuit Board Connectors
MICRO-D CBR Board Mount Connector PCB Layouts – Socket Connectors
Patterns shown are for connector mounting side of PC board. 9 Thru 69 Contacts .096 (2.44) Diameter Mounting Holes, 75-130 Pin .125 (3.18) Diameter
CONNECTOR FLANGE 25
23
26
24 51
21 22
49 50
74
19
75
45 46
39 38
64
62
67
63
5
8
31 32
58
56 59
1
4
33 34
61
3
6
35 36
60
65
7
10 37
40
66
9
12
41 42
69
11
14
43
68 71
13
16
44
70 73
15
18
47 48
72
17
20
2 29
27
30 54
57
C
.400 (10.16) .200 (5.08)
28
2XØ.125 (3.18)
52 55
53
.100 (2.54) TYP .228 (5.79) .050 (1.27) TYP 1.705 (41.31)
5X.100 (2.54)
75 SOCKET
.025 (.635) CONNECTOR FLANGE 25
.400 (10.16)
26
23
21
24 51
22 49
50 75
7X.100 (2.54)
47
73
99
96 97
42
69
70
67
68
93
39
65
92
11
91
37
61
89
87
84 85
55
56
53
80 81
27 28
54
82 83
29 30
57 58
1 2
31 32
59
86
4
33 34
60
3
6
35
62
5
8
36
63
88
7
10
38
64 90
9
12
40
66
94 95
13 14
41
44
71
98
15 16
43
46
72
17
18
45
48
74 100
19 20
52 78
79
76 77
.100 (2.54) TYP
.275
.050(1.27) TYP 1.800 (45.72)
100 SOCKET .200 (5.08)
7X.100 (2.54) CONNECTOR FLANGE 33
31 32
65
30 63
64 98
29
61 60 94
97
95
130 128
26 59
93
23 24
57
58 92
126
127
25
28
62
96
129
27
22 55
56 90
91
21 20
53 54
88 89
19 18 51 52
86 87
17
48 82
83
121 119 117 115
11 12
79
76 77
112 110
7 8
43 44
78
9 10
45 46
80
81
124 122 120 118 116 114
125 123
13 14
49 47 50
84 85
15
16
41 42
39 40
74 75
73
3
1
4 37
38 72
108 106
113 111 109
5 6
2 35
36 70
71
.400 (10.16)
34 68
69
66
67
104 102 100
107 105 103
101
.100 (2.54) TYP .050 (1.27) TYP
99
.275 (6.99)
2.150 (54.61)
130 SOCKET
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-27 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-SMR Surface Mount Right Angle
Printed Circuit Board Connectors Surface Mount Micro-D – These connectors feature .025 inch terminal spacing and an alignment strip for accurate registration. The integral mounting legs provide a ground path. 9 To 51 Contacts – These compact connectors are lighter and smaller than comparable thru-hole versions.
C
Mil Spec Reliability – Suitable for mission-critical requirements, These high performance connectors meet the requirements of MIL-DTL-83513. TwistPin Contact
Aluminum Shell Epoxy Potting
Aluminum Shell
Socket Contact
Epoxy Potting Plastic Alignment Strip
Plastic Alignment Strip
Insulator
Integral Mounting Leg
Flourosilicone Interfacial Seal
Pin Connector
Insulator
Integral Mounting Leg
Socket Connector
How To Order Surface Mount PCB Micro-D Connectors Sample Part Number
mwdm
Series
MWDM Glenair Micro-D
Shell Material and Finish
Aluminum–Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Insulator Material
2 - Nickel 5 - Gold
2
l
51-2
P
smr
p
n
Stainless Steel Shell 3 - Passivated
L – LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer/ PPS - 40% Glass Filled Polyphenylene Sulfide
Contact Layout
9, 15, 21, 25, 31, 37, 51-2 (See Table I)
Contact Type
P - Pin S - Socket
Termination Type
SMR - Surface Mount Right Angle
Jackpost or Jackscrew Option
N - Thru-Hole P - Jackpost M - Jackscrew, Hex Head T - Threaded Insert
Jackposts for Rear Panel Mounting R1 – .032” Panel R4 – .093” Panel R2 – .047” Panel R5 – .125 Panel R3 – .062” Panel R6 – .080” Panel
N - Thru-Hole, No Insert T - Threaded Inserts Board Mounting Threaded Insert Option
.160 (4.06) Max #2-56 Insert
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-28 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-SMR Surface Mount Right Angle Dimensions
Table I: Dimensions
A B C .324 (8.23)
.070 Max
C
.177 (4.50)
D
.094 (2.39) .008±.005 (0.20± 0.08)
JACKPOST, THREADED INSERT: #2-56 UNC-2B THREADS THRU-HOLE: .096 ± .005 (2.43 ± 0.13) F .224 (5.69)
.581 (14.76)
.492 (12.47)
.093 ± .005 (2.36 ± 0.13) .200 (5.08) TYP
.025 (0.64) TYP
Ø.008 ± .001 (0.20 ± 0.03)
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51-2P 51-2S
In.
B mm.
.785
19.94
.785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.840 1.840
19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 46.74 46.74
© 2013 Glenair, Inc.
C Max.
D Max.
In. ±.005
mm. ± 0.13
In.
mm.
In.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.615 1.615
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 41.02 41.02
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 1.375 1.444
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 34.93 36.68
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250
High Performance Micro-D Connectors and Cables
F mm.
In. ±.003
mm. ± 0.08
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-29 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-SMR Surface Mount Right Angle Hardware
Surface Mount MICRO-D Hardware Options N
P
R1 Thru R6
C
Thru-Hole
Standard Jackpost
Jackpost for Rear Panel Mounting
No jackpost supplied
Factory installed with nut and lockwasher
Shipped loosely installed. Install with permanent threadlocking compund.
M
T
T
Jackscrew, Hex Drive
Threaded Insert
Board Mount Threaded Insert
Attached with e-ring
#2-56 Thread
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
© 2013 Glenair, Inc.
1 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Materials And Finishes Connector Shell
Aluminum Alloy 6061.See Ordering Info for Plating Options
Insulators
Liquid Crystal Polymer (LCP)/Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-30 E-Mail:
[email protected]
Micro-D PCB
Micro-D MWDM-SMR Surface Mount Right Angle PCB Layouts
SMR Surface Mount Connector PCB Layouts FRONT OF CONNECTOR FLANGE
Suggested Printed Circuit Board Layout
B .025 (0.64) TYP
.492(12.47)
C
.160 (4.06)
.012 (0.30
Socket
9 Contacts
.174 (4.42)
5 9 4 8 3 7 2 6 1
.017 (0.43) Ø.093 (2.36) A
1 6 2 7 3 8 4 9 5
Pin
15 Contacts
Socket
Layout
8 15 7 14 6 13 5 12 4 11 3 10 2 9 1
9 15 21
1 9 2 10 3 11 4 12 5 13 6 14 7 15 8
Pin
25 31 37 51-2
Socket
21 Contacts
11 21 10 20 9 19 8 18 7 17 6 16 5 15 4 14 3 13 2 12 1
A In. .565 .715 .865 .965 1.115 1.265 1.615
B mm. 14.35 18.16 21.97 24.51 28.32 32.13 41.02
In. .200 .350 .500 .600 .750 .900 1.250
mm. 5.08 8.89 12.70 15.24 19.05 22.86 31.75
1 12 2 13 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 11
Pin
Socket
25 Contacts
13 25 12 24 11 23 10 22 9 21 8 20 7 19 6 18 5 17 4 16 3 15 2 14 1
1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13
Pin
Socket
31 Contacts
16 31 15 30 14 29 13 28 12 27 11 26 10 25 9 24 8 23 7 22 6 21 5 20 4 19 3 18 2 17 1
1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16
Pin
Socket
37 Contacts
19 37 18 36 17 35 13 16 34 15 33 14 32 13 31 12 30 11 29 10 28 9 27 8 26 7 25 6 24 5 23 4 22 3 21 2 20 1
1 20 2 21 3 22 4 23 5 24 6 25 7 26 8 27 9 28 10 29 11 30 12 31 13 32 14 33 15 34 16 13 35 17 36 18 37 19
Pin
51 Contacts
Socket
26 51 25 50 24 49 23 48 22 47 21 46 20 45 19 44 18 43 17 42 13 16 41 15 40 14 39 13 38 12 37 11 36 10 35 9 34 8 33 7 32 6 31 5 30 4 29 3 28 2 27 1
1 27 2 28 3 29 4 30 5 31 6 32 7 33 8 34 9 35 10 36 11 37 12 38 13 39 14 40 15 41 13 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 51 26
Pin
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-31 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580 Vertical Mount
Printed Circuit Board Connectors Save Space On Your Circuit Board – These Micro-D connectors feature .075 X .075 inch terminal spacing. Glenair's GMR7580 offers significant size and weight savings compared to traditional .100" pitch connectors. High Performance – GMR7580 connectors meet the performance requirements of MIL-DTL-83513. Gold-plated TwistPin contacts assure best performance.
C
How To Order GMR7580 Vertical Mount Connectors Sample Part Number
GMR7580
-31
S
Series
GMR7580 - Micro-D Vertical Mount Connector
Contact Layout
9, 15, 21, 25, 31, 37, 51, 100 (See Table II)
Contact Type
P - Pin S - Socket
Tail Length Inches (mm)
1 - .109" (2.76) 2 - .150" (3.81) 3 - .190" (4.83) 4 - .250" (6.35) 5 - Staggered Tail Length Length in Inches ± .015 (0.38)
Shell Plating Finish
Aluminum Shell A - Cadmium B - Nickel C - Allochrome D - Black Anodize
Hardware Option
NN - No Jackpost, No Threaded Insert PN - Extended Jackpost For .062" (1.6) PCB, No Threaded Insert RN - Extended Jackpost For .196" (5.0) PCB, No Threaded Insert NU - Threaded insert only, no jackposts NM - Metric Threaded Insert Only, No Jackposts SU - Short Jackpost and Threaded Insert SM - Short Jackpost and Metric Threaded Insert (See Table I)
Gold-Plated Terminal Mod Code
These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder-dip and change to gold-plated terminals, add code 513
2
b
nn
513
Stainless Steel Shell F - Passivated E - Gold
Rear Panel Mount Jackposts and Threaded Inserts UN Threads Metric Threads Panel Thickness TU TM .094" (2.4) VU VM .062" (1.6) WU WM .047" (1.2) XU XM .031" (0.8) YU YM .023" (0.6)
Table I: Jackpost Options NN
PN and RN
NU, NM
SU, SM
TU, VU, WU, XU, YU TM, VM, WM, XM, YM
Threaded Inserts
Jackpost With Threaded Insert
Jackpost for Rear Panel Mounting
PC BOARD
Thru-Hole
© 2013 Glenair, Inc.
Jackpost Kit PN – .062 (1.6) PCB RN – .196 (5.0) PCB
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-32 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580 Vertical Mount
Printed Circuit Board Connectors GMR7580 Connector Dimensions F
A
H
STAGGERED LEADS
B C E
.150 (3.81) ± .015 (0.38)
G
D
Ø .020 (0.51) ± .002 (0.05)
A Max.
9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
B
C Max.
D Max.
E Max.
© 2013 Glenair, Inc.
F
In .
± .005
mm. ± 0.13
In .
mm.
In .
mm.
In .
mm.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.335 .400 .485 .550 .635 .700 .735 .800 .885 .950 1.035 1.100 .985 1.050 1.384 1.451
8.51 10.16 12.32 13.97 16.13 17.78 18.67 20.32 22.48 24.13 26.29 27.94 25.02 26.67 35.15 36.86
.185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .228 .296 .271 .333
4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 5.79 7.52 6.88 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .470 .470
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 11.94 11.94
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
.050 (1.27) .050 (1.27)
SIZES 9 THRU 51 THREAD SIZE IS #2-56 UNC OR M2 SIZE 100 THREAD SIZE IS #4-40 OR M3
SIZES 9 THRU 51 MOUNTING HOLE ARE .088/096 (2.24/2.39) SIZE 100 MOUNTING HOLE IS .145/.151 (3.68/3.81)
Layout
TAIL LENGTH ± .015 (0.38)
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
G Max.
H Max.
In .
± .003
mm. ± 0.08
In .
mm.
In .
mm.
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .430 .430
9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 10.92 10.92
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .470 .470
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 11.94 11.94
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Tin Plated Copper Alloy (100% Tin) 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-33 E-Mail:
[email protected]
C
Micro-D PCB
Micro-D GMR7580 Vertical Mount
Printed Circuit Board Connectors
GMR7580 Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. CL .133 (3.38)
C
2
1 6
.0375 (0.95)
4
3 7
8
.0375 (0.95)
.170 (4.32) CL 1
5 9
.0375 (0.95)
.075 (1.91)
.075 (1.91)
.096 (2.44) DIA TYP
.565 (14.35)
2
4
8
10 11
18 9
2
21
1
.0375 (0.95) .075 (1.91)
.865 (21.97)
3
5
18 4
6
8
2
11 12 14 15
.0375 (0.95) .075 (1.91)
1.115 (28.32)
1
3
.183 .120 (4.65) (3.05) 19 3
4
5
6
8
22 23 7
9
11 12 14 15 17 18
.075 (1.91) 1.265 (32.13)
1
2 27 3
29 12 31 32 16 35
4
5 30 6
.125 (3.18) DIA TYP
CL 7
8
10 11 13 14 16 17 19 20 22 23 25 26
33 9
36 12 39 15 42 18 45 21 48 24 51
28 29 31 32 34 35 37 38 40 41 43 44 46 47 49 50
20 21 39 24 42 26 28 45 30 48 33 34
52 53 55 56 58 59 61 62
65 66 68 69 71 72 74 75
77 54 80 57 83 60 86 63 64 90 67 93 70 96 73 99
.0375 (0.95)
1.215 (30.86)
9
27 10 30 13 33 16 36 19
.0375 (0.95)
.263 (6.68)
10 11 13 14 15 17 18
.075 (1.91)
8
37 PIN
36 37 38 40 41 43 27 44 46 47 49 50 51
.075 (1.91)
6 24 7
20 22 23 25 26 28 29 31 32 34 35 37
.0375 (0.95)
25
5
21 4
.096 (2.44) DIA TYP
CL
.075 (1.91)
.096 (2.44) DIA TYP
.096 (2.44) DIA TYP
2
11 12
.075 (1.91)
31 PIN
CL
9
21 10 24 13
.0375 (0.95)
.183 (4.65) 9
8
25 PIN
17 19 20 22 23 25 26 28 29 31
1
6 18 7
.965 (24.51)
24 10 27 13 30 16
.075 (1.91)
5
14 16 17 19 20 22 23 25
CL
21 7
.096 (2.44) DIA TYP
.096 (2.44) DIA TYP
CL
.075 (1.91)
.096 (2.44) DIA TYP
21 PIN
2
3 15 4
13 14 16 17 19 20
1
8 15
.075 (1.91) .715 (18.16)
.183 (4.65) 7
6
.075 (1.91)
.183 (4.65)
7
15 PIN
5
3 15
5 12 6
.0375 (0.95)
.170 (4.32) CL 12
4 3
10 11 13 14
.075 (1.91)
9 PIN
1
2 9
.0375 (0.95)
76 78 79 81 82 84 85 87 88 89 91 92 94 95 97 98 100
.0375 (0.95)
.075 (1.91)
.075 (1.91) 1.800 (45.72)
51 PIN © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
100 PIN U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-34 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580 Vertical Mount
Printed Circuit Board Connectors
GMR7580 Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. CL .133 (3.38) 5
4
3
9
8
.0375 (0.95)
.0375 (0.95)
2 7
.170 (4.32) CL 8
1 6
.0375 (0.95)
.075 (1.91)
.075 (1.91)
.096 (2.44) DIA TYP
.565 (14.35)
8 9
20
7
5
4
2
12 11
1
.0375 (0.95)
8
6
5
3
18 17 15 14 12 11 37 35 34 32
.096 (2.44) DIA TYP
.075 (1.91) 1.115 (28.32)
34 33 48 30 51 50 49 47
.075 (1.91)
6
5
4
2
1
.075 (1.91)
3
2
4 21
1
31 29 28 26 25 23 22 20
.0375 (0.95)
.125 (3.18) DIA TYP
CL
26 25 23 22 20 19 17 16 14 13 11 10
8
51 24 48 21 45 18 42 15 39 12 36
9 33
99 73 96 70 93 67 100 98 97 95 94 92
.075 (1.91)
1.215 (30.86)
51 SOCKET © 2013 Glenair, Inc.
5
.075 (1.91)
75 74 72 71 69 68 66 65
44 27 43 41 40 38 37 36
.0375 (0.95)
6
7
5 6 30
4
2
1
3 27
50 49 47 46 44 43 41 40 38 37 35 34 32 31 29 28
3 19
45 28 26 42 24 39 21 20 46
8
1.265 (32.13)
.263 (6.68)
.0375 (0.95)
7 23 22
9
37 SOCKET .096 (2.44) DIA TYP
8
.096 (2.44) DIA TYP
30 10 27 7 24
.075 (1.91)
31 SOCKET
25
1
CL
19 36 16 33 13
1
.0375 (0.95)
9
2
.965 (24.51)
2
4 18
31 29 28 26 25 23 22 20 19 17
35 16 32 31 12 29
3 4 15
25 SOCKET
7 21
CL
5
.0375 (0.95)
CL 9
6 7 18
.183 (4.65)
.075 (1.91)
18 17 15 14 13 11 10
8
.075 (1.91)
21 SOCKET
15 14 12 11
.096 (2.44) DIA TYP
CL
.075 (1.91)
.096 (2.44) DIA TYP
.865 (21.97)
16 30 13 27 10 24
.096 (2.44) DIA TYP
25 23 22 20 19 17 16 14
.075 (1.91)
.120 (4.65) (3.05) .183
9
13 24 10 21
12
19 17 16 14 13
.183 (4.65)
C
1 9
15 SOCKET
15 3
.075 (1.91)
2 3
.075 (1.91) .715 (18.16)
.183 (4.65)
18 6
4
.0375 (0.95)
.170 (4.32) CL 21
5 6 12
14 13 11 10
.075 (1.91)
9 SOCKET
11 10
7 15
High Performance Micro-D Connectors and Cables
62 61 59 58 56 55 53 52
90 64 63 86 60 83 57 80 54 77 91
.0375 (0.95)
89 88 87 85 84 82 81 79 78 76
.0375 (0.95) .075 (1.91)
1.800 (45.72)
100 SOCKET U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-35 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590 Right Angle Mount
Printed Circuit Board Connectors Save Space On Your Circuit Board – These Micro-D connectors feature .075 X .075 inch terminal spacing. Glenair's GMR7590 offers size and weight savings compared to traditional .100" pitch connectors. High Performance – GMR7590 connectors meet the performance requirements of MIL-DTL-83513. Gold plated TwistPin contacts assure best electrical and mechanical performance.
C
How To Order GMR7590 Connectors Sample Part Number
gmr7590
-31
s
2
b
Series
GMR7590 Right Angle Mount Connector
Contact Layout
9, 15, 21, 25, 31, 37, 51, 100,
Contact Type
P- Pin S- Socket
Tail Length in Inches (mm.)
1 - .109" (2.76) 2 - .150" (3.81) 3 - .190" (4.83) 4 - .250" (6.35) 5 - Staggered Tail Length Length in Inches ± .015 (0.38)
Shell Plating Finish
Aluminum Shell A- Cadmium B- Nickel D- Black Anodize E- Gold
Jackpost Options
NN - No Jackpost, No Threaded Insert NU - Threaded Insert Only, No Jackposts NM - Metric Threaded Insert Only, No Jackposts SU - Short Jackpost and threaded Insert SM - Short Jackpost and Metric Threaded Insert SN - Short Jackpost, No Threaded Insert (See Table I)
Gold-Plated Terminal Mod Code
T hese connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
su
513
Stainless Steel Shell F- Passivated
C- Allochrome
ear Panel Mount Jackposts and Threaded Inserts R UN Threads Metric Threads Panel Thickness TU TM .094" (2.4) VU VM .062" (1.6) WU WM .047" (1.2) XU XM .031" (0.8) YU YM .023" (0.6)
Table I: Jackpost Options NN
NU, NM
SN
SU, SM
TU,VU,WU,XU,YU TM,VM,WM,XM,YM
No Jackpost, No Threaded Insert In PCB Mtng Hole
No Jackpost, Threaded Insert In PCB Mounting Hole
Jackpost Installed, No Threaded Insert in PCB Mounting Hole
Jackpost With Threaded Insert
Jackpost for Rear Panel Mounting
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-36 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590 Right Angle Mount
Printed Circuit Board Connectors Table II: Dimensions A B C
.150 (3.81) ± .015 (0.38)
D
E
C
TAIL LENGTH ± .015 (0.38)
F
.050 (1.27) .050 (1.27) G
H
STAGGERED LEADS
SIZES 9 THRU 51 THREAD SIZE IS #2-56 UNC OR M2. SIZE 100 THREAD SIZE IS #4-40 OR M3.
SIZES 9 THRU 51 MOUNTING HOLE IS .088/096 (2.24/2.39) SIZE 100 MOUNTING HOLE IS .145/.151 (3.68/3.81) A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
B
C Max.
D Max.
E Max.
± .005
mm. ± 0.13
In .
mm.
In .
mm.
In.
mm.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.335 .400 .485 .550 .635 .700 .735 .800 .885 .950 1.035 1.100 .985 1.050 1.384 1.451
8.51 10.16 12.32 13.97 16.13 17.78 18.67 20.32 22.48 24.13 26.29 27.94 25.02 26.67 35.15 36.86
.185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .228 .296 .271 .333
4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 5.79 7.52 6.88 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 10.00 10.00
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
© 2013 Glenair, Inc.
F
In .
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
G Max.
In .
± .003
mm. ± 0.08
In.
mm.
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .490 .490 .660 .660
10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 12.45 12.45 16.76 16.76
H
In.
mm.
.250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .300 .300 .400 .400
6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.62 7.62 10.16 10.16
± .010
±0.25
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Tin Plated Copper Alloy Sn60/Pb40 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-37 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590 Right Angle Mount
Printed Circuit Board Connectors
GMR7590 Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. CONNECTOR FLANGE
CONNECTOR FLANGE
CL .133 (3.38)
C
1
2 6
3
.250 (6.35)
4
7
8
.170 (4.32) CL
.0375 (0.95) 1
5
2
4
9
9
.0375 (0.95)
.075 (1.91)
.075 (1.91)
.096 (2.44) DIA TYP
.565 (14.35)
5
3
.0375 (0.95)
CONNECTOR FLANGE .096 (2.44) DIA TYP .250 (6.35) CL
CONNECTOR FLANGE
2
4
5
.183 (4.65)
.250 (6.35) 7
3 15
6
8
2
10 11
18 9
1
21
3
5
15 4
6
8
18 7
.0375 (0.95)
.865 (21.97)
.075 (1.91) .965 (24.51)
21 PIN
25 PIN
CONNECTOR FLANGE .096 (2.44) DIA TYP .250 (6.35)
CONNECTOR FLANGE
2 1
3
5
18 4
6
8
.183 (4.65)
.250 (6.35)
CL
21 7
9
2
11 12 14 15
1
24 10 27 13 30 16
.0375 (0.95)
1.115 (28.32)
5
6
8
24 7
9
.0375 (0.95) .075 (1.91)
1.265 (32.13)
31 PIN
37 PIN CONNECTOR FLANGE
CONNECTOR FLANGE CL
.120 (3.05) 1
2
4
19 3
5
6
22 23 7
8
9 25
.0375 (0.95)
1
2 27 3
29 12 31 32 16 35
20 21 39 24 42 26 28 45 30 48 33 34
.0375 (0.95) .075 (1.91)
4
5 30 6
7
.400 (10.16)
8
10 11 13 14 16 17 19 20 22 23 25 26
33 9
36 12 39 15 42 18 45 21 48 24 51
.0375 (0.95)
28 29 31 32 34 35 37 38 40 41 43 44 46 47 49 50
.096 (2.44) DIA TYP
52 53 55 56 58 59 61 62
65 66 68 69 71 72 74 75
77 54 80 57 83 60 86 63 64 90 67 93 70 96 73 99 76 78 79 81 82 84 85 87 88 89 91 92 94 95 97 98 100
.075 (1.91)
1.215 (30.86)
51 PIN
© 2013 Glenair, Inc.
CL
.263 (6.68)
.300 (7.62)
10 11 13 14 15 17 18
36 37 38 40 41 43 27 44 46 47 49 50 51
.075 (1.91)
11 12 14 15 17 18
27 10 30 13 33 16 36 19
.075 (1.91)
.096 (2.44) DIA TYP
.075 (1.91)
3 21 4
CL
20 22 23 25 26 28 29 31 32 34 35 37
17 19 20 22 23 25 26 28 29 31
.075 (1.91)
11 12
.0375 (0.95)
.075 (1.91)
.096 (2.44) DIA TYP
.075 (1.91)
.183 (4.65)
9
21 10 24 13
14 16 17 19 20 22 23 25
13 14 16 17 19 20
.075 (1.91)
.096 (2.44) DIA TYP
.075 (1.91) .715 (18.16)
15 PIN
.170 (4.32) CL 12
8 15
11 13 14
9 PIN
1
7
12 6
10
.075 (1.91)
.250 (6.35)
High Performance Micro-D Connectors and Cables
.0375 (0.95) .075 (1.91)
.125 (3.16) DIA TYP
1.800 (45.72)
100 PIN
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-38 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590 Right Angle Mount
Printed Circuit Board Connectors
GMR7590 Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. CONNECTOR FLANGE
CONNECTOR FLANGE
CL .133 (3.38) 5
4
3
9
8
.250 (6.35)
2
.170 (4.32) CL
.0375 (0.95) 8
1
7
7
5
15
6
.0375 (0.95)
.075 (1.91)
.075 (1.91)
.096 (2.44) DIA TYP
.565 (14.35)
8
.0375 (0.95)
20
7
5
4
CONNECTOR FLANGE .096 (2.44) DIA TYP .250 (6.35) CL
2
15 3
1
12 11
12
9
8
6
13 24 10 21
19 17 16 14 13
5
7 18
.865 (21.97)
.075 (1.91)
25 SOCKET
CONNECTOR FLANGE
15 14 12 11 31 29 28
.183 (4.65)
.250 (6.35)
CL 9
8
6
5
7 21
3
2
4 18
CONNECTOR FLANGE .096 (2.44) DIA TYP .250 (6.35)
CL
18 17 15 14 12 11 1
9
8
19 36 16 33 13 30 10 27
26 25 23 22 20 19 17
37 35 34 32
.0375 (0.95)
.075 (1.91)
1
.965 (24.51)
21 SOCKET
16 30 13 27 10 24
2
.0375 (0.95)
.075 (1.91)
.096 (2.44) DIA TYP
.075 (1.91)
.183 (4.65)
3 4 15
25 23 22 20 19 17 16 14
.0375 (0.95)
.075 (1.91)
.096 (2.44) DIA TYP
.075 (1.91) .715 (18.16)
.183 (4.65)
.250 (6.35)
18 6
C
1 9
14 13 11 10
.075 (1.91)
CONNECTOR FLANGE
9
2 3
15 SOCKET
.170 (4.32) CL 21
4
6 12
9 SOCKET
11 10
.250 (6.35)
.096 (2.44) DIA TYP
.075 (1.91) 1.115 (28.32)
6
5
3
7 24
2
4 21
1
31 29 28 26 25 23 22 20
.0375 (0.95)
.075 (1.91)
.075 (1.91) 1.265 (32.13)
31 SOCKET
37 SOCKET CONNECTOR FLANGE .263 (6.68)
CONNECTOR FLANGE CL
.120 (3.05)
18 17 15 14 13 11 10 35 16 32 31 12 29
.0375 (0.95) 9
8
25
6
5
7 23 22
4
2
51 50 49 47 46 44 27 43 41 40 38 37 36
.075 (1.91)
.0375 (0.95)
.300 (7.62)
8
51 24 48 21 45 18 42 15 39 12 36
9 33
75 74 72 71 69 68 66 99 73 96 70 93 67
.096 (2.44) DIA TYP .075 (1.91)
100 98 97 95 94 92
.075 (1.91) 1.215 (30.86)
51 SOCKET
© 2013 Glenair, Inc.
.400 (10.16)
26 25 23 22 20 19 17 16 14 13 11 10
7
5 6 30
4
2 3 27
1
.0375 (0.95)
50 49 47 46 44 43 41 40 38 37 35 34 32 31 29 28
1
3 19
34 33 48 30 45 28 26 42 24 39 21 20
CL
High Performance Micro-D Connectors and Cables
65
62 61 59 58 56 55 53 52
90 64 63 86 60 83 57 80 54 77 91 89 88 87 85 84 82 81 79 78 76
.0375 (0.95) .075 (1.91)
.125(3.18) DIA TYP
1.800 (45.72)
100 SOCKET
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-39 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580C Compact Flange Vertical Mount Printed Circuit Board Connector
Innovative Design for Flex Circuits – These Micro-D connectors answer the need for a compact flex circuit connector. Featuring .075 X .075 inch row spacing. Glenair's GMR7580C accepts standard jackscrews and jackposts, making it ideal for flex-to-board applications. High Performance – GMR7580C connectors meet the performance requirements of MIL-DTL-83513. Gold-plated TwistPin contacts assure best electrical and mechanical performance.
C
How To Order GMR7580 Vertical .075" Pitch Connectors Sample Part Number
GMR7580C
-31
Series
GMR7580C Micro-D Metal Shell, Vertical Mount PCB, Compact
Contact Layout
9, 15, 21, 25, 31, 37, 51, 100 (Table II)
Contact Type
P - Pin S - Socket
Tail Length in Inches (mm.)
1 - .109" (2.76) 2 - .150" (3.81) 3 - .190" (4.83) 4 - .250" (6.35) 5 - Staggered Tail Length Length in Inches ± .015 (0.38)
Shell Plating Finish
Aluminum Shell A - Cadmium B - Nickel C - Allochrome D - Black Anodize E - Gold
Mounting Hardware
B, P, M, M1, S, S1, L, K, F, R (See Table I)
Gold-Plated Terminal Mod Code
These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
s
2
b
s1
513
Stainless Steel Shell F - Passivated
Table I: Mounting Hardware B
P
M
M1
S
S1
L
K
F
R
Thru-Hole Order Hardware Separately
Jackpost Removable Includes Nut and Washer
Jackscrew Hex Head Removable E-ring
Jackscrew Hex Head Removable E-ring Extended
Jackscrew Slot Head Removable E-ring
Jackscrew Slot Head Removable E-ring Extended
Jackscrew Hex Head NonRemovable
Jackscrew Slot Head NonRemovable Extended
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-40 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580C Compact Flange Vertical Mount Printed Circuit Board Connector
Table II: Dimensions STAGGERED LEADS
H
A B C
F G
E D
.150 (3.81) ± .015 (0.38)
.100 (25.4)
C
Ø .020 (0.51) ± .002 (0.05) SIZES 9 THRU 51 MOUNTING HOLE IS .088/096 (2.24/2.39) SIZE 100 MOUNTING HOLE IS .145/.151 (3.68/3.81) A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
B
C Max.
D Max.
E Max.
© 2013 Glenair, Inc.
F
In .
± .005
mm. ± 0.13
In .
mm.
In .
mm.
In .
mm.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.335 .400 .485 .550 .635 .700 .735 .800 .885 .950 1.035 1.100 .985 1.050 1.384 1.451
8.51 10.16 12.32 13.97 16.13 17.78 18.67 20.32 22.48 24.13 26.29 27.94 25.02 26.67 35.15 36.86
.185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .228 .296 .271 .333
4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 5.79 7.52 6.88 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 10.00 10.00
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32v Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
.050 (1.27)
SIZES 9 THRU 51 THREAD SIZE IS #2-56 UNC SIZE 100 THREAD SIZE IS #4-40
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
.050 (1.27)
G Max.
H Max.
In .
± .003
mm. ± 0.08
In .
mm.
In .
mm.
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .430 .430
9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 10.92 10.92
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .470 .470
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 11.94 11.94
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Tin Plated Copper Alloy (100% Tin) 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-41 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580C Compact Flange Vertical Mount Printed Circuit Board Connector
GMR7580C Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board.
CL
C
CL 1
1
2
3
6
7
4 8
5 9
4
11 13 14
.0375 (0.95)
15 PIN
CL 2
4
CL
5
3 15
7 6
8
2
10 11
18 9
1
21
3
5
15 4
6
8
18 7
.0375 (0.95)
.075 (1.91)
21 PIN
25 PIN
CL 3
5
18 4
6
8
21 7
CL 9
2
11 12 14 15 1
24 10 27 13 30 16
3
5
6
21 4
24 7
.0375 (0.95)
.075 (1.91)
37 PIN CL
CL
19 3
4
5
6
22 23 7
8
9
1
7
8
10 11 13 14 16 17 19 20 22 23 25 26
33 9
36 12 39 15 42 18 45 21 48 24 51 65 66 68 69 71 72 74 75
77 54 80 57 83 60 86 63 64 90 67 93 70 96 73 99
.0375 (0.95)
76 78 79 81 82 84 85 87 88 89 91 92 94 95 97 98 100
.075 (1.91)
51 PIN
© 2013 Glenair, Inc.
5 30 6
52 53 55 56 58 59 61 62
20 21 39 24 42 26 28 45 30 48 33 34
.075 (1.91)
4
28 29 31 32 34 35 37 38 40 41 43 44 46 47 49 50
29 12 31 32 16 35
36 37 38 40 41 43 27 44 46 47 49 50 51
.075 (1.91)
2 27 3
10 11 13 14 15 17 18
25
11 12 14 15 17 18
.0375 (0.95)
31 PIN
2
9
27 10 30 13 33 16 36 19
.075 (1.91)
.075 (1.91)
1
8
20 22 23 25 26 28 29 31 32 34 35 37
17 19 20 22 23 25 26 28 29 31
.075 (1.91)
11 12
.0375 (0.95)
.075 (1.91)
.075 (1.91)
2
9
21 10 24 13
14 16 17 19 20 22 23 25
13 14 16 17 19 20
.075 (1.91)
1
8 15
.075 (1.91)
9 PIN
12
7
12 6
.075 (1.91)
.075 (1.91)
1
5
3 10
.0375 (0.95)
.075 (1.91)
2 9
High Performance Micro-D Connectors and Cables
.0375 (0.95) .075 (1.91)
100 PIN
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-42 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7580C Compact Flange Vertical Mount Printed Circuit Board Connector
GMR7580C Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board.
CL
CL 8
5
4 9
3 8
2 7
1
7 15
6
.0375 (0.95)
.075 (1.91)
8
20
15 SOCKET
CL
7
5
18 6
4
2
15 3
12 11
1
9
8
6
13 24 10 21
12
.0375 (0.95)
CL
9
8
6
5
10 24 7 21
3
18 17 15 14 12 11
2
4 18
19 36 16 33 13
1
.0375 (0.95)
.075 (1.91)
31 SOCKET
6
5
7 24
3
2
4 21
1
.075 (1.91)
37 SOCKET
CL
CL
.0375 (0.95) 9 25
8
6
5
4
7 23 22
2
1
44 27 43 41
.0375 (0.95) .075 (1.91)
40
26 25 23 22 20 19 17 16 14 13 11 10
8
51 24 48 21 45 18 42 15 39 12 36
9 33
7
5 6 30
4
2
1
3 27
50 49 47 46 44 43 41 40 38 37 35 34 32 31 29 28
3 19
75 74 72 71 69 68 66 65
34 33 48 30 45 28 26 42 24 39 21 20
99 73 96 70 93 67
38 37 36
100 98 97 95 94 92
.075 (1.91)
51 SOCKET
© 2013 Glenair, Inc.
8
.0375 (0.95)
.075 (1.91)
.075 (1.91)
18 17 15 14 13 11 10
9
30 10 27
37 35 34 32 31 29 28 26 25 23 22 20
31 29 28 26 25 23 22 20 19 17
.075 (1.91)
1
25 SOCKET
CL
51 50 49 47 46
2
.075 (1.91)
21 SOCKET
35 16 32 31 12 29
3 4 15
.0375 (0.95)
.075 (1.91)
15 14 12 11
5
7 18
25 23 22 20 19 17 16 14
19 17 16 14 13
.075 (1.91)
16 30 13 27
C
1 9
.075 (1.91)
CL 9
2 3
.0375 (0.95)
.075 (1.91)
9 SOCKET
21
4
6 12
14 13 11 10
.075 (1.91)
11 10
5
High Performance Micro-D Connectors and Cables
62 61 59 58 56 55 53 52
90 64 63 86 60 83 57 80 54 77 91 89 88 87 85 84 82 81 79 78 76
.0375 (0.95) .075 (1.91)
100 SOCKET
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-43 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590C Compact Flange Right Angle Mount Printed Circuit Board Connector
Innovative Design for Flex Circuits – These Micro-D connectors answer the need for a compact flex circuit connector. Featuring .075 X .075 inch row spacing. Glenair's GMR7590C accepts standard jackscrews and jackposts, making it ideal for flex-to-board applications.
C
High Performance – GMR7590C connectors meet the performance requirements of MIL-DTL-83513. Gold plated TwistPin contacts assure best electrical and mechanical performance.
How To Order GMR7590 Connectors Sample Part Number
gmr7590c
Series
GMR7590C Micro-D Right Angle Mount Connector
Contact Layout
9, 15, 21, 25, 31, 37, 51, 100 (See Table Ii)
Contact Type
P - Pin S - Socket
Tail Length in Inches (mm.)
1 - .109" (2.76) 2 - .150" (3.81) 3 - .190" (4.83) 4 - .250" (6.35) 5 - Staggered Tail Length Length in Inches ± .015 (0.38)
Shell Plating Finish
Aluminum Shell A - Cadmium B - Nickel C - Allochrome D - Black Anodize E - Gold
Hardware
B, P, M, M1, S, S1, L, K, F, R (See Table I)
Gold-Plated Terminal Mod Code
These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513
-31
s
2
b
s1
513
Stainless Steel Shell F - Passivated
Table I: Mounting Hardware B
P
M
M1
S
S1
L
K
F
R
Thru-Hole Order Hardware Separately
Jackpost Removable Includes Nut and Washer
Jackscrew Hex Head Removable E-ring
Jackscrew Hex Head Removable E-ring Extended
Jackscrew Slot Head Removable E-ring
Jackscrew Slot Head Removable E-ring Extended
Jackscrew Hex Head NonRemovable
Jackscrew Slot Head NonRemovable Extended
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-44 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590C Compact Flange Right Angle Mount Printed Circuit Board Connector Table II: Dimensions A B C
.150 (3.81) ± .015 (0.38)
E D Ø .020 (0.51) ± .002 (0.05) F
SIZES 9 THRU 51 MOUNTING HOLE IS .088/096 (2.24/2.39) SIZE 100 MOUNTING HOLE IS .145/.151 (3.68/3.81)
J
SIZES 9 THRU 51 THREAD SIZE IS #2-56 UNC SIZE 100 THREAD SIZE IS #4-40
H A Max.
9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
B
In.
mm.
In . ± .005
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
C Max.
D Max.
E Max.
mm. ± 0.13
In .
mm.
In .
mm.
In.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.335 .400 .485 .550 .635 .700 .735 .800 .885 .950 1.035 1.100 .985 1.050 1.384 1.451
8.51 10.16 12.32 13.97 16.13 17.78 18.67 20.32 22.48 24.13 26.29 27.94 25.02 26.67 35.15 36.86
.185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .185 .251 .228 .296 .271 .333
4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 4.70 6.38 5.79 7.52 6.88 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .394 .394
© 2013 Glenair, Inc.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
F
G Max.
mm.
In . ± .003
mm. ± 0.08
In.
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 10.00 10.00
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .490 .490 .660 .660
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
C
.050 (1.27)
STAGGERED LEADS
G
Layout
.050 (1.27)
.100 (25.4)
H
mm.
In. ± .010
mm. ±0.25
10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 12.45 12.45 16.76 16.76
.400 .400 .530 .530 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.500 1.500
10.16 10.16 13.46 13.46 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 38.13 38.13
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options
Insulator, Tray
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant
Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Tin Plated Copper Alloy (100% Tin) 300 Series Stainless Steel Epoxy Resin Hysol EE4215
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-45 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590C Compact Flange Right Angle Mount Printed Circuit Board Connector
GMR7590C Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. CONNECTOR FLANGE
CONNECTOR FLANGE
C
CL 1
2
3
6
7
4
1
5
8
2
9
3
4
5
7
8
6
CONNECTOR FLANGE
10 11
18 9
.175 (4.45)
CL 2
21
1
13 14 16 17 19 20
3
5
15 4
6
8
18 7
9
.0375 (0.95)
.075 (1.91)
.075 (1.91)
.075 (1.91)
21 PIN
25 PIN
CONNECTOR FLANGE
2
3
5
18 4
6
8
21 7
CONNECTOR FLANGE
.175 (4.45)
CL 1
9
.175 (4.45)
CL 2
11 12 14 15 1
24 10 27 13 30 16
3
5
21 4
6
8
24 7
9
11 12 14 15 17 18
27 10 30 13 33 16 36 19
20 22 23 25 26 28 29 31 32 34 35 37
17 19 20 22 23 25 26 28 29 31
.0375 (0.95)
.075 (1.91)
11 12
21 10 24 13
14 16 17 19 20 22 23 25
.0375 (0.95)
.075 (1.91)
13 14
.075 (1.91)
.175 (4.45)
CL 3 15
8 15
15 PIN
CONNECTOR FLANGE
2
7
.0375 (0.95)
.075 (1.91)
9 PIN
12
5 12 6
10 11
.075 (1.91)
.075 (1.91)
1
4
9
.0375 (0.95)
.175 (4.45)
CL
.212 (5.40)
.0375 (0.95)
.075 (1.91)
.075 (1.91)
31 PIN
37 PIN
.075 (1.91)
CONNECTOR FLANGE CONNECTOR FLANGE CL 1
2 19 3
4
5
6
22 23 7
8
9 25
1
10 11 13 14 15 17 18 29 12 31 32 16 35
5 30 6
7
8
10 11 13 14 16 17 19 20 22 23 25 26
33 9
36 12 39 15 42 18 45 21 48 24 51
52 53 55 56 58 59 61 62
65 66 68 69 71 72 74 75
77 54 80 57 83 60 86 63 64 90 67 93 70 96 73 99
.0375 (0.95)
76 78 79 81 82 84 85
.075 (1.91)
51 PIN
© 2013 Glenair, Inc.
4
28 29 31 32 34 35 37 38 40 41 43 44 46 47 49 50
20 21 39 24 42 26 28 45 30 48 33 34
.075 (1.91)
2 27 3
36 37 38 40 41 43 27 44 46 47 49 50 51
.075 (1.91)
.212 (5.38)
CL
.187 (4.75)
High Performance Micro-D Connectors and Cables
87 88 89 91 92 94 95 97 98 100
.0375 (0.95) .075 (1.91)
100 PIN
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-46 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMR7590C Compact Flange Right Angle Mount Printed Circuit Board Connector
GMR7590C Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. CONNECTOR FLANGE
CONNECTOR FLANGE CL .212 (5.40) .133 (3.38) 5
4 9
3 8
2 7
8
1
20
7 18
6 12
5 6
4
2
15 3
1
.075 (1.91)
12 11
12
9
13 24 10 25 23
21 SOCKET
31 29 28
6
3
2
4 15
1
.0375 (0.95)
CONNECTOR FLANGE
5
7 21
3
18 17 15 14 12 11 19 36 16 33 13
1
37 35 34 32
.0375 (0.95)
31 SOCKET
9
8
30 10 27
6 7 24
5
3
2
4 21
1
31 29 28 26 25 23 22 20
.0375 (0.95)
.075 (1.91)
.075 (1.91)
.175(4.45)
CL
2
4 18
26 25 23 22 20 19 17
.075 (1.91)
5
25 SOCKET
CL 8
6
.075 (1.91)
.175(4.45)
9
8
22 20 19 17 16 14
CONNECTOR FLANGE
10 24
.175(4.45)
21 7 18
.075 (1.91)
.075 (1.91)
15 14 12 11
9
CL
.0375 (0.95)
16 30 13 27
3
CONNECTOR FLANGE
19 17 16 14 13
.075 (1.91)
C
1
.0375 (0.95)
.175(4.45)
CL 8
2
15 SOCKET
CONNECTOR FLANGE
9
4
.075 (1.91)
9 SOCKET
21
5
14 13 11 10
.075 (1.91)
.075 (1.91)
11 10
7 15
6
.0375 (0.95)
.175 (4.45)
CL
.075 (1.91)
37 SOCKET CONNECTOR FLANGE
CL 18 17 15 14 13 11 10 35 16 32 31 12 29 34 33 48 30 51 50 49 47
.075 (1.91)
.187 (4.75) 9
8
25
6
5
7 23 22
4
2
1
8
51 24 48 21 45 18 42 15 39 12 36
9 33
75 74 72 71 69 68 66 65 99 73 96 70 93 67
46 44 27 43 41 40 38 37 36
.0375 (0.95)
100 98 97 95 94 92
.075 (1.91)
51 SOCKET
© 2013 Glenair, Inc.
26 25 23 22 20 19 17 16 14 13 11 10
7
5 6 30
4
2
1
3 27
50 49 47 46 44 43 41 40 38 37 35 34 32 31 29 28
3 19
45 28 26 42 24 39 21 20
.075 (1.91)
.212 (5.38)
CL
CONNECTOR FLANGE
High Performance Micro-D Connectors and Cables
62 61 59 58 56 55 53 52
90 64 63 86 60 83 57 80 54 77 91 89 88 87 85 84 82 81 79 78 76
.0375 (0.95) .075 (1.91)
100 SOCKET
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-47 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMLM MasterLatch® Rear Panel Mount, Condensed Board Straight, Vertical Printed Circuit Board Receptacle Master Latch Rear Panel Mount Receptacle – These Micro-D’s provide excellent shock and vibration performance thanks to our innovative MasterLatch® design. Once mated the latching mechanism prevents unwanted separation of mated GMLM connectors. High Performance – GMLMR connectors meet the performance requirements of MIL-DTL-83513. Gold plated TwistPin contacts assure best electrical and mechanical performance.
C
How To Order GMLMR Connectors
Sample Part Number
gmlmr
2
Series
GMLMR Micro-D MasterLatch®
Shell Material and Finish
1 = Cadmium 4 = Black Anodize 6 = Chem Film
Insulator Material
L = LCP or PPS
Contact Layout
9 thru 37 See Table II
Contact Type
S = Socket
Termination Type
CBS = Condensed Board Straight
Rear Panel Mount Hardware Option
B = No Hardware R3 = .062 panel
R1 = .032 panel R4 = .093 panel
O-Ring Type
C = Conductive
N = Nitrile
Threaded Insert
T = Threaded Insert
Lead Length
.080, .110, .125, .140, .150, .172, .190, .250
Table I: Jackpost Options Panel
Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compound.
© 2013 Glenair, Inc.
-25
s
cbs
R3
N
t
-.125
2 = Nickel 5 = Gold
R2 = .047 panel, R5 = .125 panel
R6 = .080 panel
Materials and Finishes
Performance Specifications Current Rating DWV
R1 Thru R6
l
3 AMP 600 VAC Sea level 5000 Megohms Insulation Resistance Minimum Contact Resistance 8 Milliohms Maximum Low Level Contact 32 Milliohms Resist. Maximum Magnetic 2 µ Maximum Permeability Operating -55° C. to +150° C. Temperature Shock, Vibration 50 g., 20g. (10 Ounces) X (# of Mating Force Contacts)
High Performance Micro-D Connectors and Cables
Connector Shell
Aluminum alloy, see ordering info for plating options
Insulator
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Phos Bronze/Gold Plate Stainless Steel/Passivate Epoxy Resin Hysol EE4215
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-48 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMLM MasterLatch® Rear Panel Mount, Condensed Board Straight, Vertical Printed Circuit Board Receptacle Table II: Dimensions Shell Size .094 (2.39) .735 (18.67)
.290 (7.37)
9 15 21 25 31 37
B ±.003 (.08)
A
D E ±.003 (.08) Max. 0.565 (14.35) 0.785 (19.94) 0.715 (18.16) 0.935 (23.75) 0.865 (21.97) 1.085 (27.56) 0.965 (24.51) 1.185 (30.10) 1.115 (28.32) 1.335 (33.91) 1.265 (32.13) 1.485 (37.72)
C
1.410 (35.81) 0.965 (24.51) 0.745 (18.92) 1.560 (39.62) 1.115 (28.32) 0.895 (22.73) 1.710 (43.43) 1.265 (32.13) 1.045 (26.54) 1.810 (45.97) 1.365 (34.67) 1.145 (29.08) 1.960 (49.78) 1.515 (38.48) 1.295 (32.89) 2.110 (53.59) 1.665 (42.29) 1.445 (36.70)
A B
E
C
.268 (6.81)
2x 2-56 Thread
24 Awg (Ø.020) Solder Dipped Leads
D
.310 Max.
.525 (13.33)
Patterns shown are for connector mounting side of PC board. .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.038 (0.96) REF
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP
.075 (1.91) 7
9
6 1
8
10 12 14
.225(5.72)
3 2
.075 (1.91)
.183(4.65) TYP
5 4
.200 (5.08) .565 (14.35)
.038 (0.96) REF
.096 (2.44) DIA TYP
9 SOCKET .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
13 15 17 19 21 12 14 16 18 20 1 3 5 11 2 4 6 8 10 .500 (12.7) REF
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.038 (0.96) REF
.096 (2.44) DIA TYP
038 (0.96) REF
2
7
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
9
13 15 4 6 8 10 12 14 16 .750(19.05) REF 1.115 (28.32)
.225 (5.72)
11
.096 (2.44 DIA TYP
31 SOCKET © 2013 Glenair, Inc.
.096 (2.44) DIA TYP
1
17 16
3 2
19 18
5 4
21 20
22 9
7 6
8
25
23
.600(15.24) REF
24 11
10
.225 (5.72)
13
12
.096 (2.44) DIA TYP
25 SOCKET
.075 (1.91)
5
8
.965 (24.5)
18 20 22 24 26 28 30 17 19 21 23 25 27 29 31 3
2 4 6 .350(8.89) REF .715 (18.16)
.225 (5.72)
.075 (1.91)
14
21 SOCKET
1
15 7
15
.225 (5.72)
.865
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
9
15 SOCKET
.075 (1.91)
.038 (0.96) REF
11 13 3 5
1
High Performance Micro-D Connectors and Cables
.038 (0.96) REF
.075 (1.91) 21 23 25 27 29 31 33 35 37 20 22 24 26 28 30 32 34 36 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 .900(22.86) REF 1.265 (32.13)
.225 (5.72) .096 (2.44) DIA TYP
37 SOCKET U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-49 E-Mail:
[email protected]
C
Micro-D PCB
Micro-D GMLM MasterLatch® Rear Panel Mount, Condensed Board Right Angle Printed Circuit Board Receptacle Master Latch Rear Panel Mount Receptacle – These Micro-D’s provide excellent shock and vibration performance thanks to our innovative MasterLatch® design. Once mated the latching mechanism prevents unwanted separation of mated GMLM connectors. High Performance – GMLM connectors meet the performance requirements of MIL-DTL-83513. Gold plated TwistPin contacts assure best electrical and mechanical performance.
C
How To Order GMLMR Connectors
Sample Part Number
gmlmr
2
Series
GMLMR Micro-D MasterLatch®
Shell Material and Finish
1 = Cadmium 4 = Black Anodize 6 = Chem Film
Insulator Material
L = LCP or PPS
Contact Layout
9 thru 37 See Table II
Contact Type
S = Socket
Termination Type
CBS = Condensed Board Right Angle
RPM Hardware Option
B = No Hardware R4 = .093 panel
Threaded Insert Option
T = Threaded Insert in Board Mount Hardware Option
O-Ring Type
C = Conductive
Lead Length
.080, .110, .125, .140, .150, .172, .190, .250
l
-37
s
cbr
b
t
n
-.150
2 = Nickel 5 = Gold
R1 = .032 panel R5 = .125 panel
R2 = .047 panel R6 = .080 panel
R3 = .062 panel
N = Nonconductive (Nitrile)
Table I: Jackpost Options No Designator
R1 Thru R6 Panel
THREADED INSERT
Threaded Hole Jackpost for Rear Panel Mounting For use with Glenair jackposts only. Order hardware Shipped loosely installed. Install with permanent separately. Install with threadlocking compound. threadlocking compound.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-50 E-Mail:
[email protected]
Micro-D PCB
Micro-D GMLM MasterLatch® Rear Panel Mount, Condensed Board Right Angle Printed Circuit Board Receptacle Skt #1
B
.310 Max.
.268
.525 2x 2-56 Thread
24 AWG (Ø.020) Solder Dipped Leads
A .710 (18.03) .445 (11.30)
C
.480 (12.19)
.325 (8.25)
A
9
1.410 (35.81)
.965 (24.51)
.745 (18.92)
15
1.560 (39.62)
1.115 (28.32)
21
1.710 (43.43)
25
.195 (4.95) Mounting Holes 2x Ø.096±.003 (Ø2.44±.008)
E F
E.
F
.565 (14.35)
.785 (19.94)
1.180 (29.97)
.895 (22.73)
.715 (18.16)
.935 (23.75)
1.330 (33.78)
1.265 (32.13)
1.045 (26.54)
.865 (21.97)
1.085 (27.56)
1.480 (37.59)
1.810 (45.97)
1.365 (34.67)
1.145 (29.08)
.965 (24.51)
1.185 (30.10)
1.580 (40.13)
31
1.960 (49.78)
1.515 (38.48)
1.295 (32.89)
1.115 (28.32)
1.335 (33.91)
1.730 (43.94)
37
2.110 (53.59)
1.665 (42.29)
1.445 (36.70)
1.265 (32.13)
1.485 (37.72)
1.880 (47.75)
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force
Table II: Dimensions B Ref. C D
Shell Size
.094 (2.39)
D
Lead Length ±.015
Materials and Finishes
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Connector Shell
Aluminum alloy, see ordering info for plating options
Insulator, Tray
Liquid Crystal Polymer (LCP) Polyphenylene Sulfide (PPS)
Interfacial Seal Socket Contact Hardware Encapsulant
Fluorosilicone Rubber, Blue Phos Bronze/Gold Plate Stainless Steel/Passivate Epoxy Resin Hysol EE4215
GMLM PCB Footprints 9 Position
6 1
7 2
8 3
15 Position
10
9 4
9
5 1
2
21 Position
13 12 1
15 14
2
16 4
3
17 6
5
18 8
7
9
10
17 21 11
1
19 18
2
3
21 20
4 3
© 2013 Glenair, Inc.
13 12
14
14 6
1
15
5
7
16 15
2
8
23 22
6 5
8 7
25 24
4
9
11 10
19 17
5
20 7
6
21 9
8
23
25
22 10
12
11
24
13
37 Position
27 26
18 3
31 Position
20 19
11 4
25 Position
29 28 13
12
20
31 30
16
15 14
High Performance Micro-D Connectors and Cables
22 21
1
24
23 3
2
26
25 5
4
28 27
7 6
U.S. CAGE Code 06324
9 8
29
10
31
30 11
33
32 13
12
35
34 15
14
17 16
37 36 19
18
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-51 E-Mail:
[email protected]
C
sERIES gmsm
Low profile micro-D
MICRO−D For compact applications
T
urn to Glenair when board space is at a premium. Our Low Profile single Row Metal Shell Microminiature connectors feature machined aluminum or stainless steel shells with gold plated TwistPin contacts for superior performance and a reduced footprint. Our low profile connectors are available with solder cups, insulated or solid wire pigtails in straight and right angle orientations. All of our low profile Micro–D rectangular connectors are available with flex circuit terminations, as well as turnkey point-to-point cordsets.
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Micro-D Single Row
Section D Low Profile Single Row
Metal Shell Microminiature Product Selection Guide
A
Connector height is a priority for miniaturized electronics modules. These GMSM connectors are shorter and occupy less board real estate than comparable two row Micro-D connectors. Solder Cup, Pre-wired and PCB Versions feature gold-plated TwistPin contacts, machined aluminum shells, and are fully potted with epoxy. The glass-filled thermoplastic LCP trays will withstand soldering heat without damage. Eight Contact Arrangements – Choose from 4 to 35 contacts. Available in a variety of finishes, the socket connectors are fitted with Fluorosilicone interfacial seals.
GMSM Solder Cup Connectors Page D-2
GMSM Insulated Wire Pigtails Page D-2
GMSM Solder Cup Connectors Nonremovable solder cup contacts for termination to #26 AWG or smaller wire, .050" contact spacing, eight layouts from 4 to 35 contacts.
B C D E F G H
GMSM Pre-Wired Pigtails Crimp contacts are terminated to insulated Teflon® wire. Connectors are backpotted with epoxy, providing strain relief and environmental protection.
J K L
GMSM Solid Wire Pigtails Page D-3
GMSM RIght Angle Printed Circuit Board .075 inch by .100 inch terminal spacing, for thru-hole rigid or flexible circuits. One piece threaded inserts provide a ground path from the jackpost to the board.
M N P Q INDEX
GMSM Right Angle PCB Page D-5
GMSM with Solid Uninsulated Wire Gold-plated or solder-dipped solid copper wire, crimp termination, backpotted with epoxy. Can be terminated to flexible circuits.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-1 E-Mail:
[email protected]
Micro-D Single Row
GMSM Solder Cup, Pre-Wired and Solid Wire Single Row Connector Low Profile Metal Shell Microminiature
GMSM Connectors offer mil spec design and performance in a smaller form factor. These GMSM single row connectors are reduced in height compared to two-row Micro-D connectors.
A B
GMSM Connectors feature gold plated TwistPin contacts, machined aluminum shells, and are fully potted with epoxy. Choose from 4 to 35 contacts. Available in a variety of finishes, socket connectors are fitted with Fluorosilicone interfacial seals.
C D
How To Order Solder Cup Connectors Sample Part Number
E F G
Solder Cup
H
GMSM
Series
GMSM Glenair Metal Shell Microminiature
Shell Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Contact Layout
04, 06, 10, 15, 20, 25, 30, 35 (See Table II)
Contact Type
P - Pin S - Socket
Termination Type
S - Solder Cup
Hardware
B, P, M, M1, S, S1, L, K, F, R (See Table I)
1-
15
P
S
B
6
K
1–
18
B
Stainless Steel Shell 3 - Passivated
How To Order Insulated Wire Connector
J
Sample Part Number
GMSM
2–
10
P–
K
Series
GMSM Glenair Metal Shell Microminiature
L
Shell Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodized 5 - Gold 6 - Chem Film
Number of Contacts
04, 06, 10, 15, 20, 25, 30, 35 (See Table II)
Contact Type
P - Pin, S - Socket
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 AWG
Wire Type
K - M22759/11 600 Vrms Teflon (TFE)® J - M22759/33600 Vrms Modified Cross-Linked Tefzel (ETFE)® E - NEMA HP3-EB 600 Vrms Type E M16878/4 (TFE)
Wire Color Code
1 - White 2 - Yellow 5 - Color-Coded Stripes Per MIL-STD-681 7 - 10 Color Repeating
Wire Length Inches
18 - Wire Length In Inches. “18” Specifies 18 Inches.
Hardware
B, P, M, M1, S, S1, L, K, F, R (See Table I)
M N
Insulated Wire Pigtails
P Q
Stainless Steel Shell 3 - Passivated
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-2 E-Mail:
[email protected]
Micro-D Single Row
GMSM Solder Cup, Pre-Wired and Solid Wire Single Row Connector Low Profile Metal Shell Microminiature
How To Order Uninsulated Wire Connector Sample Part Number
Gold Plated or Solder Dipped Solid Leads
GMSM
2–
10
P–
Series
GMSM Glenair Metal Shell Microminiature
Shell Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodized 5 - Gold 6 - Chem Film
Number of Contacts
04, 06, 10, 15, 20, 25, 30, 35 (See Table II)
Contact Type
P - Pin, S - Socket
Wire Gage (AWG)
4 - #24 5 - #26 6 - #26
Wire Type
C - Copper Wire
Wire Finish
3 - Solder Dipped (60/40/Tin/lead) 4 - Gold Plated
Wire Length Inches
.125, .250, .375, .500, .750, 1.000, 2.000 Wire Length In Inches. “.500” Specifies Half Inch.
Hardware
B, P, M, M1, S, S1, L, K, F, R (See Table I)
5
C
4-
.250
P
B
Stainless Steel Shell 3 - Passivated
C D E F
Table I: Mounting Hardware B
P
M
M1
S
S1
L
A
K
F
R
G H
Thru-Hole Order Hardware Separately
Jackpost Removable Includes Nut and Washer
Jackscrew Hex Head Removable E-ring
Jackscrew Hex Head Removable E-ring Extended
Jackscrew Slot Head Removable E-ring
Jackscrew Slot Head Removable E-ring Extended
Jackscrew Hex Head NonRemovable
Jackscrew Slot Head NonRemovable Extended
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
J K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-3 E-Mail:
[email protected]
Micro-D Single Row
GMSM Solder Cup, Pre-Wired and Solid Wire Single Row Connector Dimensions
Table II: Dimensions
A
A B
B C
.194 (4.94) MAX. D
.122± .005 (3.10 ± 0.05)
D
D
E
F
0.177(4.5) REF.
2 x Mounting Holes ø . 088/.094 (2.24/2.39)
0.083 (2.11) NOM. .194 (4.94) MAX.
E F
0.083 (2.11) NOM.
C
J
D
G
.098(2.5)Max
G
F INSULATED WIRE LENGTH +1.00/-0.00 (+2.54/-0.00) UNINSULATED WIRE LENGTH ± 0.030 (0.76)
H
H J
Pin 1
K L M N P Q
Socket 1
Face View of Pin (Plug) Connector A Max. Layout 04P 04S 06P 06S 10P 10S
15P 15S
INDEX
20P 20S 25P 25S 30P 30S 35P 35S
B
C Max.
In.
mm.
In. mm. ±.003 ± 0.08
.648 .648 .748 .748 .948 .948 1.198 1.198 1.448 1.448 1.698 1.698 1.948 1.948 2.198 2.198
16.45 16.45 19.00 19.00 24.07 24.07 30.42 30.42 36.77 36.77 43.12 43.12 49.47 49.47 55.82 55.82
.478 .478 .578 .578 .777 .777 1.027 1.027 1.277 1.277 1.527 1.527 1.777 1.777 2.027 2.027
© 2013 Glenair, Inc.
12.11 12.11 14.65 14.65 19.73 19.73 26.08 26.08 32.43 32.43 38.78 38.78 45.13 45.13 51.48 51.48
Face View of Socket (Receptacle) Connector
D Max.
E Max.
F Max.
G Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.250 .309 .350 .409 .550 .609 .800 .859 1.050 1.109 1.300 1.359 1.550 1.609 1.800 1.859
6.37 7.85 8.91 10.40 13.99 15.47 20.34 21.82 26.69 28.17 33.04 34.52 39.39 40.87 45.74 47.22
.135 .194 .135 .194 .135 .194 .135 .194 .135 .194 .135 .194 .135 .194 .135 .194
3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54
.041 .012 .041 .012 .041 .012 .041 .012 .041 .012 .041 .012 .041 .012 .041 .012
1.03 0.30 1.03 0.30 1.03 0.30 1.03 0.30 1.03 0.30 1.03 0.30 1.03 0.30 1.03 0.30
.358 .370 .358 .370 .358 .370 .358 .370 .358 .370 .358 .370 .358 .370 .358 .370
9.10 9.40 9.10 9.40 9.10 9.40 9.10 9.40 9.10 9.40 9.10 9.40 9.10 9.40 9.10 9.40
.309 .309 .409 .409 .609 .609 .859 .859 1.109 1.109 1.359 1.359 1.609 1.609 1.859 1.859
7.85 7.85 10.40 10.40 15.47 15.47 21.82 21.82 28.17 28.17 34.52 34.52 40.87 40.87 47.22 47.22
.184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197
4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-4 E-Mail:
[email protected]
Micro-D Single Row
GMSM Right Angle Single Row PCB Connector
Low Profile Metal Shell Microminiature Low Profile GMSM Single Row Micro Connectors offer mil spec design and performance in a smaller form factor for space savings. These GMSM connectors are shorter and occupy less board real estate than comparable two row Micro-D connectors. GMSM Connectors feature gold-plated TwistPin contacts, machined aluminum shells, and are fully potted with epoxy. Choose from 4 to 35 contacts. Available in a variety of finishes, socket connectors are fitted with Fluorosilicone interfacial seals. How To Order GMSM Right Angle PCB Connector Sample Part Number
GMSM
2-
10
P
CBR
SU
1
B C D E F
Series
GMSM
Shell Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Contact Layout
04, 06, 10, 15, 20, 25, 30, 35 (See Table II)
Contact Type
P - Pin S - Socket
Termination Style
CBR - Right Angle PCB
Hardware Option
NU - Threaded Insert Only, No Jackposts SU - Jackpost and Threaded Insert (See Table I)
Tail Length
1 - .109 (2.8) 2 - .150 (3.8) 3 - .190 (4.8) 4 - .250 (6.3)
Stainless Steel Shell 3 - Passivated
G H J
Rear Panel Jackposts with Threaded Inserts TU - 0.093" (2.4) Panel VU - 0.062" (1.6) Panel WU - 0.047" (1.2) Panel XU - 0.031" (0.8) Panel YU - 0.023" (0.6) Panel
K L
Table I: Mounting Hardware NU
A
SU
TU, VU, WU, XU, YU
M N P
Jackpost With Threaded Insert
Jackpost
for Rear Panel Mounting
Q INDEX
No Jackpost, Threaded Insert In PCB Mounting Hole
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-5 E-Mail:
[email protected]
Micro-D Single Row
GMSM Right Angle Single Row PCB Connector
Low Profile Metal Shell Microminiature
A
Table II: Dimensions A B C
B C
D
E
.140 (3.55)
D
E
TAIL LENGTH ± .015 (0.38)
.020 ( 0.51) Diameter
E J
F
Pin 1
G
L
G
H
#2-56 UNC 2B THDS. 2 PLCS.
K
Face View of Pin (Plug) Connector
.100 (2.54) RADIUS
J
Socket 1
Face View of Socket (Receptacle) Connector
K L M N P Q
A Max. Layout 4P 4S 6P 6S 10P 10S
15P 15S
INDEX
20P 20S 25P 25S 30P 30S 35P 35S
B
C Max.
In.
mm.
In. mm. ±.003 ± 0.08
.648 .648 .748 .748 .948 .948 1.198 1.198 1.448 1.448 1.698 1.698 1.948 1.948 2.198 2.198
16.45 16.45 19.00 19.00 24.07 24.07 30.42 30.42 36.77 36.77 43.12 43.12 49.47 49.47 55.82 55.82
.478 .478 .578 .578 .777 .777 1.027 1.027 1.277 1.277 1.527 1.527 1.777 1.777 2.027 2.027
© 2013 Glenair, Inc.
12.11 12.11 14.65 14.65 19.73 19.73 26.08 26.08 32.43 32.43 38.78 38.78 45.13 45.13 51.48 51.48
D Max.
E Max.
G Max.
J Max.
K
L
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In. mm. In. mm. ±.004 ± 0.10 ±.010 ± 0.25
.250 .309 .350 .409 .550 .609 .800 .859 1.050 1.109 1.300 1.359 1.550 1.609 1.800 1.859
6.37 7.85 8.91 10.40 13.99 15.47 20.34 21.82 26.69 28.17 33.04 34.52 39.39 40.87 45.74 47.22
.135 .194 .135 .194 .135 .194 .135 .194 .135 .194 .135 .194 .135 .194 .135 .194
3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94 3.42 4.94
.241 .241 .241 .241 .241 .241 .241 .241 .241 .241 .241 .241 .241 .241 .241 .241
6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13 6.13
.364 .364 .364 .364 .364 .364 .364 .364 .364 .364 .364 .364 .364 .364 .364 .364
9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25
.184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197
4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00 4.67 5.00
.250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35
.213 .213 .213 .213 .213 .213 .213 .213 .213 .213 .213 .213 .213 .213 .213 .213
5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41 5.41
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-6 E-Mail:
[email protected]
Micro-D Single Row
GMSM Right Angle Single Row PCB Connector
Low Profile Metal Shell Microminiature
GMSM PCB Layouts – Pin Connectors
3
.096 (2.44) DIA.
1
4
.163(4.15) .100 (2.54)
5
.096 (2.44) DIA.
2
6
.075 (1.91)
.250 (6.35) TO FRONT FACE OF FLANGE
.163(4.15) .100 (2.54)
5
7 6
.250 (6.35) TO FRONT FACE OF FLANGE
.0375 (0.95)
.050 (1.27) 8
C
6 PIN
4 PIN
9
B
1 2
.578 (14.65)
.478 (12.11)
10
3 4
.163(4.15) .100 (2.54)
.075 (1.91)
.096 (2.44) DIA.
A
.250 (6.35) TO FRONT FACE OF FLANGE .0375 (0.95) .050 (1.27)
.250 (6.35) TO FRONT FACE OF FLANGE .0375 (0.95) .050 (1.27)
3
1
14
.096 (2.44) DIA.
2
4
.0375 (0.95)
.050 (1.27)
.163(4.15) .100 (2.54)
.075 (1.91) .777 (19.73)
9
11
13
6
8
10
12
15
7
2
4 5
3
1
.075 (1.91) 1.027 (26.08)
10 PIN
20
.163(4.15) .100 (2.54)
15
17
19
.096 (2.44) DIA.
14
9
11
13
16
18
G
.0375 (0.95)
.050 (1.27) 7
3
6
8
10
12
5
1 2
4
H
.075 (1.91) 1.277 (32.43)
20 PIN .250 (6.35) TO FRONT FACE OF FLANGE
23
25
.163(4.15) .100 (2.54)
20
22
24
.096 (2.44) DIA.
21
14
16
18 19
J
.0375 (0.95)
.050 (1.27) 17
8
10
12 11
13
15
9
6
K
2
4
1
3
5
7
.075 (1.91)
L
1.527 (38.78
25 PIN .250 (6.35) TO FRONT FACE OF FLANGE
.163(4.15) .100 (2.54)
15
17
19 20
22
24
26
28
30
21
23
25
27
29
M
.0375 (0.95)
.050 (1.27) .096 (2.44) DIA.
13 14
16
18
11 12
7
9 10
6
8
3
5 4
1 2
N
.075 (1.91) 1.777 (45.13)
30 PIN
P
.250 (6.35) TO FRONT FACE OF FLANGE
.0375 (0.95)
.050 (1.27)
.163(4.15) .100 (2.54)
35
33
31
29
27
25
20
22
24
26
28
30
23
21
14
16
18 19
17
15
8
10
12 13
11
9
6 7
Q
2
4 5
3
1
.075 (1.91)
INDEX
32
34
.096 (2.44) DIA.
2.027 (51.48)
35 PIN © 2013 Glenair, Inc.
E F
15 PIN
.250 (6.35) TO FRONT FACE OF FLANGE
D
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-7 E-Mail:
[email protected]
Micro-D Single Row
GMSM Right Angle Single Row PCB Connector
A B C D E
Low Profile Metal Shell Microminiature
GMSM PCB Layouts – Socket Connectors .250 (6.35) TO FRONT FACE OF FLANGE .0375 (0.95) .050 (1.27) 2
.096 (2.44) DIA.
4
.075 (1.91)
.250 (6.35) TO FRONT FACE OF FLANGE .0375 (0.95)
.050 (1.27) 6
4 3
1
.163(4.15) .100 (2.54)
8
5
10
2
.096 (2.44) DIA.
9
7
1
8
6
4 5
3
7
12
10 9
11
.163(4.15) .100 (2.54)
14 13
15
.075 (1.91) 1.027 (26.08)
.777 (19.73)
15 SOCKET
10 SOCKET .250 (6.35) TO FRONT FACE OF FLANGE
.0375 (0.95)
.050 (1.27) 2
.096 (2.44) DIA.
H
.0375 (0.95)
.050 (1.27)
.075 (1.91)
G
6
4
8
5
3
1
.163(4.15) .100 (2.54)
12
10
7
11
9
14
20
18
16 15
13
19
17
.075 (1.91) 1.277 (32.43)
20 SOCKET
J
.250 (6.35) TO FRONT FACE OF FLANGE
.0375 (0.95)
.050 (1.27)
K
2
.096 (2.44) DIA.
1
.163(4.15) .100 (2.54)
6
4 3
8
12
10
7
5
9
14
16
21
19
24
22
20
18 17
15
13
11
23
25
.075 (1.91) 1.527 (38.78
L
25 SOCKET .250 (6.35) TO FRONT FACE OF FLANGE
.0375 (0.95)
.050 (1.27) 2
.096 (2.44) DIA.
N
6
4
1
8
5
3
7
12
10 11
9
14 13
20
18
16 15
17
19
24
22 21
23
30
28
26 27
25
.163(4.15) .100 (2.54)
29
.075 (1.91) 1.777 (45.13)
30 SOCKET
P Q
.075 (1.91)
6 SOCKET
.250 (6.35) TO FRONT FACE OF FLANGE
2
6 5
.578 (14.65)
4 SOCKET
.096 (2.44) DIA.
4 3
1
.163(4.15) .100 (2.54)
.478 (12.11)
F
M
2
.096 (2.44) DIA.
3
1
.163(4.15) .100 (2.54)
.250 (6.35) TO FRONT FACE OF FLANGE .0375 (0.95) .050 (1.27)
.250 (6.35) TO FRONT FACE OF FLANGE
.0375 (0.95)
.050 (1.27) 2
.096 (2.44) DIA. .163(4.15) .100 (2.54)
1
4 3
6 5
12
10
8 7
9
11
14 13
17
22
20
18
16 15
19
21
26
24 23
25
32
30
28 27
29
31
34 33
35
.075 (1.91)
INDEX
2.027 (51.48)
35 SOCKET © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-8 E-Mail:
[email protected]
Micro-D Double and Triple Row
Section E Low Profile Metal and Plastic Shell Micro-D Product Selection Guide
A
MLDM Metal Shell Solder Cup Page E-3
MLDM Metal Shell, Solder Cup
Solder cup gold plated contacts accept #24-30 AWG solid or stranded wire. Available in 9 to 51 positions. High performance M83513 TwistPin contact system. Contacts are factoryinstalled, non-removable and epoxy encapsulated. 3 Amp, 600 Vac,-55°C to +150°C.
B
MLDM Metal Shell Stranded Wire Page E-5
MLDM Metal Shell, Stranded Wired
C
MLDM Metal Shell Solid Wired Page E-7
MLDM Metal Shell, Solid Wire
Pre-wired with #24 to #30 solid wire. Available in 9 to 51 positions. High performance M83513 TwistPin contact system. 3 Amp, 600 Vac,-55°C to +150°C.
E
MLDM Metal Shell Back-to-Back Page E-9
MLDM Back-To-Back Unshielded Cables
F
MLDM Metal Shell Right Angle PCB Page E-11
MLDM Metal Shell, Right Angle PCB
Pre-wired with #24 to #30 stranded wire. Available in 9 to 51 positions. High performance M83513 TwistPin contact system. 3 Amp, 600 Vac,-55°C to +150°C.
If a simple jumper cable is required, these cable assemblies simplify ordering. No special part numbers are necessary. Available in all sizes. Wiring is #1 to #1, etc. Backto-backs are built to order in any length
9 to 51 positions. High performance M83513 TwistPin contact system. Factoryinstalled contacts, non-removable and are encapsulated with epoxy. PCB terminal spacing is .100" x .100" for easy board fabrication. 3 Amp, 600 Vac,-55°C to +150°C.
MWDL Plastic Shell Solder Cup Page E-15
MWDL All-Plastic, Solder Cup
MWDL Plastic Shell Pre-Wired Page E-17
MWDL All-Plastic, Stranded Wire
MWDL Plastic Shell Solid Wire Page E-19
MLDM All Plastic, Solid Wire
MWDL Plastic Shell Right Angle PCB Page E-23 © 2013 Glenair, Inc.
These crimp-terminated pre-wired assemblies offer an alternative to the timeconsuming job of soldering wires. #24 – #30 AWG wire size. 3 Amp, 600 Vac,-55°C to +150°C.
G H J K L M
Pre-wired with #24 to #30 solid wire. Available in 9 to 51 positions. High performance M83513 TwistPin contact system. 3 Amp, 600 Vac,-55°C to +150°C.
N
MWDL All-Plastic Low Profile Back-to-Back Jumper Cables
P
Facory-terminated, contacts crimped to wire and potted with epoxy. High performance gold-plated TwistPin contacts recessed into insulator top prevent damage. 9 to 51 contacts, 3 A., 600 Vac, -55°C to +150°C. IAW MIL-DTL-83513.
MWDL All-Plastic, Right Angle PCB
9 to 51 positions. High performance M83513 TwistPin contact system. Factoryinstalled gold-plated PC tails, non-removable and epoxy encapsulated. PCB terminal spacing is .100" x .100" for easy board fabrication. 3 Amp, 600 Vac,-55°C to +150°C.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-1 E-Mail:
[email protected]
Q INDEX
MWDL Plastic Low Profile Back-to-Back Page E-21
Available in 9 to 51 contacts. High performance M83513 TwistPin contact system, the MWDL all-plastic connector is an economical alternative to metal shell connectors. Goldplated solder cups accept #24 – #30 AWG wire. 3 Amp, 600 Vac,-55°C to +150°C.
D
Micro-D Double and Triple Row
A
Low Profile Metal and Plastic Shell Micro-D Product Information
MLDM
MWDL
Low Profile Metal Shell Connector
Low Profile All-Plastic Connector
B
Metal Shell or One-Piece Plastic High Reliability TwistPin Contact System .050" Pitch Contact Spacing Solder Cup, Pre-Wired or PCB 3 Amps, +150°C, 600 Vac
C D E F G H J K L M N P Q
Low Profile Metal Shell and Plastic Shell Micro-D's Save Space Compared to MWDM Metal Shell Connectors size comparison
Low profile MLDM metal shell and MWDL plastic shell connectors are intended for high reliability board-to-wire I/O and wire-to-wire applications. Gold-plated TwistPin contacts provide excellent performance when subjected to high levels of shock and vibration. Plastic and metal versions are intermateable. Flange height is reduced by 33% compared to MWDM standard Micro-D connectors.
MLDM 51 Pin Low Profile
MWDM 51 Pin Standard Height
NOTE: Not intermatable with Standard MWDM Interface Low Profile MLDM and MWDL Contact Arrangements 1 2 3 4 5
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 10 11
1 2 3 4 5 6 7 8 9 10 11 12 13
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
6 7 8 9
9 10 11 12 13 14 15
12 13 14 15 16 17 18 19 20 21
14 15 16 17 18 19 20 21 22 23 24 25
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
9
15
21
25
31
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
37
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
51-2
51
Mating face of pin connector. Socket connector contact numbers are reversed. Specifications
Materials and Finishes
INDEX
Contacts Insulator, MWDL Body MLDM Shell Mounting Hardware Potting Compound Insulated Wire Solid Wire, PC Tails
© 2013 Glenair, Inc.
Copper alloy, 50 µInch gold over nickel Liquid crystal polymer (LCP) Aluminum alloy Stainless Steel Epoxy Per MIL-W-22759/11 and /33 Per A-A-59551, gold plated or tinned
Current Rating Contact Resistance Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration
High Performance Micro-D Connectors and Cables
3 Amps 8 milliohms maximum 600 Vac sea level 5000 megohms minimum -55°C. to +150°C. 50 g. 20 g.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-2 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Solder Cup Contact Termination Low profile MLDM connectors have reduced flange height compared to standard MWDM Micro-D connectors. These .050" pitch solder cup Micro-D connectors accept #26 to #30 gage wire with standard contacts and up to size #24 wire with “large bore” contacts. Contacts are factory-installed and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Machined aluminum shell. Glass-filled high temperature LCP thermoplastic insulators withstand soldering heat. Meets performance requirements of MIL-DTL-83513. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C. How To Order Solder Cup Connector Sample Part Number
Series
mldm2l MLDM1L Low Profile Metal Shell Micro-D with Yellow Chromate over Cadmium Shell Finish (Good corrosion protection, not RoHS compliant)
MLDM32L Low Profile Metal Shell Micro-D with Black Zinc Nickel Shell Finish (RoHS compliant, preferred for tactical equipment where a black finish and good corrosion protection are required)
MLDM2L Low Profile Metal Shell Micro-D with Electroless Nickel Shell Finish (RoHS compliant, preferred for space vehicles and protected environments)
MLDM33L Low Profile Metal Shell Micro-D with NickelFluorocarbon Shell Finish (RoHS compliant, excellent corrosion protection, grey color)
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2 (See Table II)
Contact Type
Size #26 Solder Cup Contacts (Standard) PS, - Pin SS, - Socket Size #24 Solder Cup Contacts TS, - Socket NS, - Pin
Mounting Hardware
B, P, M, M1, S, S1, L, K, F, R, H (See Table I)
-25
ps
b
A B C D E F G H J K L
Table I: Mounting Hardware P
M
M1
S
S1
L
Thru-Hole
Jackpost
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
Hex Head Jackscrew NonRemovable
K
F
R
H
Slot Head Float Mount Float Mount Jackscrew For Front For Rear NonPanel Panel Removable Mounting Mounting Extended
Threaded Insert
M N P Q INDEX
B
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-3 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Solder Cup Contact Termination Table II: Dimensions
A
2Xø.096/.088 (2.44/2.23)
A B C
B C
E
D
D
J K L M N
SOLDER CUP TERMINATION
G
F H
.200 MAX. (INNER ROW OF 3 ROW 51)
F
.094±.005 (2.39±0.13)
E G
H .100 MAX.
J
A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438 1.835 1.835
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53 46.61 46.61
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02
In.
mm.
.292 7.42 .380 9.65 .442 11.23 .530 13.46 .592 15.04 .680 17.27 .692 17.58 .780 19.81 .842 21.39 .930 23.62 .992 25.20 1.080 27.43 .942 23.93 1.030 26.16 1.340 34.04 1.425 36.20
D Max.
E Max.
F
G Max.
In.
mm.
In.
mm.
In . mm. ± .003 ± 0.08
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260 .134 .218
3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60 3.40 5.54
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260 .218 .218
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60 5.54 5.54
.199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180
5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57
H Max.
J Max.
In.
mm.
In.
mm.
.390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377
9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58
.175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .220 .220 .175 .175
4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 5.59 5.59 4.45 4.45
In.
mm.
.405 10.29 .405 10.29 .555 14.10 .555 14.10 .705 17.91 .705 17.91 .805 20.45 .805 20.45 .955 24.26 .955 24.26 1.105 28.07 1.105 28.07 1.058 26.87 1.058 26.87 1.455 36.96 1.455 36.96
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-4 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination Low profile MLDM connectors have reduced flange height compared to standard MWDM Micro-D connectors. These .050" pitch Micro-D connectors are supplied with stranded mil spec hookup wire. Contacts are crimped to wire and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Machined aluminum shell. Glass-filled high temperature LCP thermoplastic insulators. M22759/11 standard wire, or M22959/33 lightweight, high strength space grade wire. Meets performance requirements of MIL-DTL-83513. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C.
mldm2l
-31
Series
MLDM1L Low Profile Metal Shell Micro-D With Yellow Chromate Over Cadmium Finish MLDM32L Low Profile Metal Shell Micro-D With Black Zinc Nickel Shell Finish
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2 (See Table II)
Contact Type
P - Pin S - Socket
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J wire type only)
Wire Type
K Standard Wire Extruded PTFE per M22759/11, Silver-Plated Conductors
Wire color Code
1 - White 5 - Color-Coded per MIL-STD-681 7 - 10 Color Repeat (Wires are solid color per MIL-STD-681 color code system.)
Wire Length
Wire Length In Inches Example: 18 = 18 inches;
Mounting Hardware
B, M, M1, S, S1, L, F, H, P, K, R
p
-6
k
5
-18
m
MLDM2L Low Profile Metal Shell Micro-D With Electroless Nickel Shell Finish MLDM33L Low Profile Metal Shell Micro-D With Nickel-Fluorocarbon Shell Finish
P
M
M1
S
C E F G H
J Space Grade Wire High Strength, Lightweight, Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors
J K L
Table I: Mounting Hardware B
B D
How To Order Insulated Wire Connector Sample Part Number
A
S1
L
K
F
R
H
M N
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
Hex Head Jackscrew NonRemovable #2-56
Slot Head Jackscrew NonRemovable Extended #2-56
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
Threaded Insert #2-56
P Q INDEX
Thru-Hole
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-5 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination Table II: Dimensions
A B C
E
D
D
H
F
.094±.005 (2.39±0.13)
E
H J K L M N
STRANDED WIRE TERMINATION
G
F G
Length +1.00/-0.0
2Xø.096/.088 (2.44/2.23)
A B C
J A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S
In. .788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438 1.835 1.835
mm.
B
C Max.
In . mm. ± .003 ± 0.08
20.02 .565 20.02 .565 23.83 .715 23.83 .715 27.64 .865 27.64 .865 30.18 .965 30.18 .965 33.99 1.115 33.99 1.115 37.80 1.265 37.80 1.265 36.53 1.215 36.53 1.215 46.61 1.615 46.61 1.615
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02
D Max.
E Max.
In.
mm.
In.
mm.
In.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030 1.340 1.425
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16 34.04 36.20
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260 .134 .218
3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60 3.40 5.54
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260 .218 .218
F
G Max.
In .
mm.
.199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180
5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57
mm. ± .003 ± 0.08 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60 5.54 5.54
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
.390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377
9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58
.175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .220 .220 .175 .175
4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 5.59 5.59 4.45 4.45
.405 .405 .555 .555 .705 .705 .805 .805 .955 .955 1.105 1.105 1.058 1.058 1.455 1.455
10.29 10.29 14.10 14.10 17.91 17.91 20.45 20.45 24.26 24.26 28.07 28.07 26.87 26.87 36.96 36.96
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-6 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Solid Wire Termination Low profile MLDM connectors have reduced flange height compared to standard MWDM Micro-D connectors. These .050" pitch Micro-D connectors are supplied with solid copper wire. Contacts are crimped to wire and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Machined aluminum shell. Glass-filled high temperature LCP thermoplastic insulators. Meets performance requirements of MILDTL-83513. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C.
mldm2l
Series
MLDM1L Low Profile Metal Shell Micro-D With Yellow Chromate Over Cadmium Finish MLDM32L Low Profile Metal Shell Micro-D With Black Zinc Nickel Shell Finish
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2,
Contact Type
P - Pin S - Socket
Wire Gage (AWG)
4 - #24 5 - #25 6 - #26
Wire Type
C - Solid Copper
Wire Finish
3 - Solder Dipped (Sn60/Pb40) 4 - Gold-plated
Wire Length
Wire Length In Inches .125, .250, .500, 1.000, 1.500, 2.000
Mounting Hardware
B, M, M1, S, S1, L, F, H, P, K, R,
-31
s
-4
c
4
-.250
b
MLDM2L Low Profile Metal Shell Micro-D With Electroless Nickel Shell Finish MLDM33L Low Profile Metal Shell Micro-D With NickelFluorocarbon Shell Finish
P
M
M1
D E F G H J
Table I: Mounting Hardware B
B C
How To Order Solid Wire Connector Sample Part Number
A
S
S1
L
K
F
R
H
K L
Thru-Hole
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
Hex Head Jackscrew NonRemovable #2-56
Slot Head Jackscrew NonRemovable Extended #2-56
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
Threaded Insert #2-56
M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-7 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Solid Wire Termination Table II: Dimensions
A
2Xø.096/.088 (2.44/2.23)
A B C
B C
D
E
H
D
F
.094±.005 (2.39±0.13)
E
H J K L M N
SOLID WIRE TERMINATION
G
F G
LENGTH +0.2/-0.0 (±0.51)
J A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S
In. .788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438 1.835 1.835
mm.
B
C Max.
In . mm. ± .003 ± 0.08
20.02 .565 20.02 .565 23.83 .715 23.83 .715 27.64 .865 27.64 .865 30.18 .965 30.18 .965 33.99 1.115 33.99 1.115 37.80 1.265 37.80 1.265 36.53 1.215 36.53 1.215 46.61 1.615 46.61 1.615
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02
D Max.
E Max.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030 1.340 1.425
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16 34.04 36.20
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260 .134 .218
3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60 3.40 5.54
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260 .218 .218
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60 5.54 5.54
F
G Max.
In . mm. ± .003 ± 0.08 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180 .199 .180
5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57 5.05 4.57
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
.390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377
9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58
.175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .175 .220 .220 .175 .175
4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 5.59 5.59 4.45 4.45
.405 .405 .555 .555 .705 .705 .805 .805 .955 .955 1.105 1.105 1.058 1.058 1.455 1.455
10.29 10.29 14.10 14.10 17.91 17.91 20.45 20.45 24.26 24.26 28.07 28.07 26.87 26.87 36.96 36.96
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-8 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Back-To-Back Cables Factory terminated MLDM "back-to-back" jumper cables simplify ordering and reduce assembly labor. Contacts are crimped to wire and potted with epoxy. Pin contacts are goldplated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Aluminum alloy shell. Glass-filled high temperature LCP thermoplastic insulator. M22759/11 standard wire, or M22959/33 lightweight, high strength space grade wire. Meets performance requirements of MILDTL-83513. Available with 9 to 51 contacts. 3 A., 600 VAC, -55°C to +150°C. How To Order Back-to-Back Connector Sample Part Number
mldm32l MLDM1L Low Profile Metal Shell Micro-D With Yellow Chromate Over Cadmium Finish MLDM32L Low Profile Metal Shell Micro-D With Black Zinc Nickel Shell Finish
Series
-37 gp
-6
k
1
-18
p
MLDM2L Low Profile Metal Shell Micro-D With Electroless Nickel Shell Finish MLDM33L Low Profile Metal Shell Micro-D With Nickel-Fluorocarbon Shell Finish
A B C D E F
Contact Layout
9, 15, 21, 25, 31, 37, 51, 51-2 (See Table II)
Contact Type
GP - Pin Connector Both Ends GS - Socket Contacts Both Ends CS - Pin Connector to Socket Connector
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J wire only)
Wire Type
K - Standard Wire Extruded PTFE per M22759/11, Silver-Plated Conductors J - Space Grade Wire High Strength, Lightweight, Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors
Wire Color Code
1 - White 5 - Color-Coded per MIL-STD-681 7 - 10 color repreat wires are solid color per MIL-STD-681 color code system.
K
Wire Length (inches)
18 - 18 inches (2" minimum for 2 rows, 3" minimunm for 3 rows).
Mounting Hardware
B, M, M1, S, S1, L, F, H, P, K, R (See Table I)
L
G H J
M
Table I: Mounting Hardware B
P
M
M1
S
S1
L
K
F
R
H
N P
Jackpost #2-56
© 2013 Glenair, Inc.
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
Hex Head Jackscrew NonRemovable #2-56
High Performance Micro-D Connectors and Cables
Slot Head Jackscrew NonRemovable Extended #2-56
Float Mount For Front Panel Mounting
U.S. CAGE Code 06324
Float Mount For Rear Panel Mounting
Threaded Insert #2-56
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-9 E-Mail:
[email protected]
Q INDEX
Thru-Hole
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Back-To-Back Cables Table II: Dimensions
A
Wire Length +1.00/-0.00 (+25.4/-0.0)
B
2Xø.096/.088 (2.44/2.24)
D
C D E
G
F
E
J
F
G H J K
H A Max. Layout 9P 9S 15P 15S 21P 21S 25P
L
25S
M
37P
N
A
B
C
31P 31S 37S 51P 51S 51-2P 51-2S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438 1.835 1.835
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53 46.61 46.61
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02
D Max.
E Max.
F Max.
G Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030 1.340 1.425
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16 34.04 36.20
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260 .218 .218
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60 5.54 5.54
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .214 .214
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.44 5.44
.395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .199 .180
10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 5.05 4.57
.408 .408 .558 .558 .708 .708 .808 .808 .958 .958 1.108 1.108 1.058 1.058 .390 .377
10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87 9.91 9.58
.173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220 .175 .175
4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59 4.45 4.45
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260 .134 .218
3.40 5.54 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 4.50 6.60 3.40 5.54
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-10 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Right Angle PCB Termination
MLDM2L-25SCBRPT-.110
Low profile MLDM connectors have reduced flange height compared to standard MWDM Micro-D connectors. These thru-hole “CBR” style Micro-D connectors have goldplated PC tails on .100" centers. Connectors are backfilled with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Gold-plated PC tails. Machined aluminum shell, stainless steel hardware. Optional #2-56 threaded inserts in board mounting holes. Glass-filled LCP thermoplastic insulators and tray withstand immersion in +260°C solder for 10 seconds. Meets performance requirements of MILDTL-83513. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C.
MLDM2L
-21
S
CBR
Series
MLDM1L Low Profile Metal Shell Micro-D With Yellow Chromate Over Cadmium Finish MLDM32L Low Profile Metal Shell Micro-D With Black Zinc Nickel Shell Finish
Contact Layout
9, 15, 21, 25, 31, 37, 51 (See Table II)
Contact Type
P - Pin Contacts
Termination Type
CBR - Condensed Board Right Angle
Hardware Option
(Omit for None) Jackposts for Rear Panel Mounting P – Jackpost R1 – .032” Panel R2 – .047” Panel R3 – .062” Panel (See Table I) R4 – .093” Panel R5 – .125” Panel R6 – .125" Panel
Threaded Insert Option
Omit - For Thru-Holes T - Threaded Inserts in Board Mounting Holes. #2-56 Female Thread. M - Threaded Inserts in Board Mounting Holes. M2 Metric Thread.
PC Tail Length
-.110, -.125, -.150, -.190, -.250
Gold-Plated Terminal Mod Code
Omit - These connectors are solder-dipped in 60/40 tin lead solder. To delete the solder dip and change to gold-plated terminal add code 513
P
T
-.110
-513
MLDM2L Low Profile Metal Shell Micro-D With Electroless Nickel Shell Finish MLDM33L Low Profile Metal Shell Micro-D With Nickel-Fluorocarbon Shell Finish
E G H
S - Socket Contacts
J K L M
P
R1 Thru R6
N
Panel
P
THREADED INSERT
Q Standard Jackpost Factory installed, not intended for removal.
High Performance Micro-D Connectors and Cables
Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compound.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-11 E-Mail:
[email protected]
INDEX
Thru-Hole For use with Glenair jackposts only. Order hardware separately. Install with threadlocking compound. © 2013 Glenair, Inc.
C
F
Table I: Jackpost Options No Designator
B D
How To Order Right Angle PCB Connector Sample Part Numberv
A
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Right Angle PCB Termination Table II: Dimensions
A
A
B
B
D
C J
D
PC TAIL LENGTH ±.015 (0.38)
E
H
E
F
F
Ø.094 (2.39) #2-56 UNC-2B or 2mm
G H J K L M N
ø.022/.018 (0.56/0.46)
G
C
A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
B
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
D Max.
E
F Max.
G Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .300 .300
6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.62 7.62
.425 .425 .425 .425 .425 .425 .425 .425 .525 .525 .525 .525 .660 .660
10.80 10.80 10.80 10.80 10.80 10.80 10.80 10.80 13.34 13.34 13.34 13.34 16.76 16.76
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
H
J Max.
In . mm. ± .010 ± 0.25 .230 .230 .130 .130 .130 .130 .130 .130 .130 .130 .130 .130 .150 .150
5.84 5.84 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.81 3.81
In.
mm.
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 4.50 6.60
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-12 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Right Angle PCB Termination MLDM CBR PCB Layouts — Pin Connectors .565 (14.35) .250 (6.35) .020 (0.51)
.250 (6.35)
.020 (0.51) 4
2
1 6
7
1 9
.083 (2.11) .100 (2.54)
3
2
5 8
3
15 14
.100 (2.54) TYP
16
18
10
8
5
7
9
19
11
22
20 21
12 24
13
.050 (1.27) TYP
.250 (6.35)
.250 (6.35) .020 (0.51)
.020 (0.51)
4
2 1 10
9
5
4
1 8
6 13
11
2
7
12
3
14
15
8
5 19
18
.100 (2.54) TYP
6
3 17
2X .100 (2.54)
7 21
20
22
.250 (6.35)
1 12
14 13
4 15
7
17 18
.020 (0.51)
28
1
3
20
21
5 4
22 21
7 6
24 23
9 8
26 25
11 10
28
13 12
29 31
27
21 PIN
2
4
1 19
3 21
20
6 5
23 22
37
25 24
38
8
41 26
39
27 9
7
40
13
11 10 12
43 42
46 45
44
17 16
33 32
18 35
34
K
37 36
Notes
15 14
29 28
47 48
17 16
31 30
1. Patterns shown are for connector mounting side of PC board. 2. Board mounting holes are .094" (2.39) diameter. 3. PC tails are .022" (0.56) maximum diameter.
34 50
51
High Performance Micro-D Connectors and Cables
N
INDEX
51 PIN
© 2013 Glenair, Inc.
M
Q
.100 (2.54) TYP .050 (1.27) TYP
4X .100 (2.54)
L
P
35
33 32
49
.300 (7.62)
18
H J
19
37 PIN
1.215 (30.86)
.050 (1.27)
G
.100 (2.54) TYP .050 (1.27) TYP
3X .100 (2.54)
.050 (1.27) TYP
30
15 14
E F
31
.250 (6.35)
.100 (2.54) TYP
.108 (2.74)
16 30
.100 (2.54) TYP
2
11
9 19 20
2X .100 (2.54)
36
26
14 29
1.265 (321.13)
10
8
6
16
12 27
15
.050 (1.27) TYP
.183 (4.65)
.083 (2.11)
5
10 25
13
31 PIN
.865 (21.97)
3
11
24 23
15 PIN
2
9
3X .100 (2.54)
.050 (1.27) TYP
.020 (0.51)
D
25 PIN 1.115 (28.32)
.158 (4.01)
B C
23 25
.100 (2.54) TYP
9 PIN .715 (18.16)
.108 (2.74)
6
4 17
2X .100 (2.54)
.050 (1.27) TYP
A
.965 (24.51)
.083 (2.11)
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-13 E-Mail:
[email protected]
Micro-D Double and Triple Row
MLDM Low Profile Metal Shell Micro-D Right Angle PCB Termination MLDM CBR PCB Layouts — Socket Connectors
A
.565 (14.35)
.250 (6.35)
B C
.020 (0.51) 8
M N P Q
12
1
3
7
13
6
11 24
25
.100 (2.54) TYP .050 (1.27) TYP
10
23
6
9
4
7
21
20
3
5
2
17
19
18
15
16
1
14
.100 (2.54) TYP
2X .100 (2.54)
.050 (1.27) TYP
25 Socket
.715 (18.16)
.108 (2.74)
8
22
9 Socket
1.115 (28.32)
.158 (4.01)
.250 (6.35)
.250 (6.35) .020 (0.51)
.020 (0.51)
7
5
8 15
4
6 14
2
12 13
3 11
15 16
1 10
9
2X .100 (2.54)
13 14
30
.050 (1.27) TYP
11
12
29 31
.100 (2.54) TYP
27 28
.865 (21.97)
8
11 21
9
20
6 7
19
5 17
18
3 4
25
23
2 3
19
21
22
20
3X .100 (2.54)
1 17
18
.050 (1.27) TYP
1.265 (321.13)
.020 (0.51)
.250 (6.35) 19
17 18
1
13
15
37 12
.050 (1.27) TYP
15
16 35
36
.100 (2.54) TYP
2X .100 (2.54)
4 5
.100 (2.54) TYP
2 14
16
6 7
26
.183 (4.65) .250 (6.35)
10
8 24
31 Socket
.083 (2.11)
.020 (0.51)
9
10
15 Socket
K L
2
.083 (2.11) .100 (2.54)
F
J
4
9
E
H
.250 (6.35)
.020 (0.51) 5
D
G
.965 (24.51)
.083 (2.11)
13
14 33
34
11
12 31
32
29 30
7
9
10 28
26 27
4 24
25
1 2
22 23
20 21
.100 (2.54) TYP .050 (1.27) TYP
3X .100 (2.54)
21 Socket
3
5 6
8
37 Socket
1.215 (30.86)
.108 (2.74) .050 (1.27)
17 18 35
16
51
14 31
33 34
32 50
13
15
12 29
30 49
4X .100 (2.54)
11
48
9
10 46
28
43 45
47
8
27
44
5
7 25
41 42
26 40
4
6
3 23
24 39
.300 (7.62)
1 21
22 38
Notes
2
19 20
37
1. Patterns shown are for connector mounting side of PC board. 2. Board mounting holes are .094" (2.39) diameter. 3. PC tails are .022" (0.56) maximum diameter.
36
.100 (2.54) TYP .050 (1.27) TYP
INDEX
51 Socket
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-14 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Solder Cup Termination These .050" pitch all-plastic solder cup Micro-D connectors accept #26 to #30 gage wire with standard contacts and up to size #24 wire with “large bore” contacts. Contacts are factory-installed and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Glass-filled high temperature thermoplastic insulators withstand soldering heat. Meets performance requirements of MIL-DTL-83513, Class P. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C. How To Order Solder Cup Connector Sample Part Number
MWDL
Series
MWDL - Low Profile Plastic Shell Micro-D
Contact Layout
9, 15, 21, 25, 31, 37, 51 (See Table II)
Contact Type
Size #26 Solder Cup Contacts (Standard) PS - Pin SS - Socket
Mounting Hardware
B, P, M, M1, S, S1 (See Table I)
-25
SS
B
P
M
B C D E
Size #24 Solder Cup Contacts NS - Pin TS - Socket
F G
Table I: Mounting Hardware B
A
M1
S
S1
H J
Thru-Hole
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-15 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Solder Cup Termination Table II: Dimensions
A
A B C
B
.096/.088 (2.43/2.23) DIA.
D
J K L M N P
.200 (5.08) MAX INNER ROW OF 3 ROW 51
PIN CONNECTOR
.100/.088 (2.54/2.24)
F
F
J
H
SOCKET CONNECTOR
E
E
H
J
D
C
G
.110 (2.79) MAX
G A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S
In.
mm.
.788 20.02 .788 20.02 .938 23.83 .938 23.83 1.088 27.64 1.080 27.64 1.188 30.18 1.185 30.18 1.338 33.99 1.338 33.99 1.488 37.80 1.488 37.80 1.438 36.53 1.438 36.53
B
In .
C Max.
mm.
± .003 ± 0.08
.565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86
D Max.
E Max.
F Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53
.408 .408 .558 .558 .708 .708 .808 .808 .958 .958 1.108 1.108 1.058 1.058
10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87
.173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220
4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 4.50 6.60
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force
G Max.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Materials and Finishes Insulator Pin Contact Socket Contact Hardware Encapsulant
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide(PPS) Beryllium Copper, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-16 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Insulated Wire Termination MWDL connectors are supplied with stranded mil spec hookup wire. Contacts are crimped to wire and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Glass-filled high temperature thermoplastic connector body. M22759/11 standard wire, or M22959/33 lightweight, high strength space grade wire. Meets performance requirements of MIL-DTL-83513, Class P. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C.
A
How To Order Stranded Wire Connector
D
Sample Part Number
MWDL
-37
P
-6
K
Series
MWDL - Low Profile Plastic Shell Micro-D
Contact Layout
9, 15, 21, 25, 31, 37, 51 (See Table II)
Contact Type
P - Pin Contacts S - Socket Contacts
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (See Table II)
Wire Type
K - Standard Wire Extruded PTFE per M22759/11, Silver-Plated Conductors (#30 AWG not available) J - Space Grade Wire High Strength, Lightweight, Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors
Wire Color Code
1 - White 5 - Color-Coded per MIL-STD-681. 7 - 10 Color Repeat Wires are solid color per MIL-STD-681 color code system.
Wire Length (Inches)
18 = 18 inches
Mounting Hardware
B, M, M1, S, S1, P (See Table I)
5
-18
M
P
M
C E F G H J K
Table I: Mounting Hardware B
B
M1
S
S1
L M
Thru-Hole
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-17 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Insulated Wire Termination Table II: Dimensions
A
A B C
B
J D
D
C
LENGTH + 1.0/-0.0 (+25.4/-0.0) H
.096/.088 (2.43/2.23) DIA.
D
SOCKET CONNECTOR
.100/.088 (2.54/2.24) E
E
LENGTH + 1.0/-0.0 (+25.4/-0.0) H
J
F
PIN CONNECTOR
F G
G H J K L M N P Q
A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
In.
14.35 .292 14.35 .380 18.16 .442 18.16 .530 21.97 .592 21.97 .680 24.51 .692 24.51 .780 28.32 .842 28.32 .930 32.13 .992 32.13 1.080 30.86 .942 30.86 1.030
D Max.
E Max.
F Max.
mm.
In.
mm.
In.
mm.
In.
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
G Max.
mm.
In.
10.03 .408 9.53 .408 10.03 .558 9.53 .558 10.03 .708 9.53 .708 10.03 .808 9.53 .808 10.03 .958 9.53 .958 10.03 1.108 9.53 1.108 10.03 1.058 9.53 1.058
H Max.
J Max.
mm.
In.
mm.
In.
mm.
10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87
.173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220
4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 4.50 6.60
Materials and Finishes Insulator Pin Contact Socket Contact Hardware Encapsulant
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide(PPS) Beryllium Copper, Gold Over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-18 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Solid Wire Termination MWDL connectors are supplied with solid copper wire. Contacts are crimped to wire and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Glass-filled high temperature thermoplastic connector body. Choose goldplated wire or pre-tinned with Sn60/Pb40 tin-lead solder. Meets performance requirements of MIL-DTL-83513, Class P. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C.
A B C
How To Order Solid Wire Connector Sample Part Number
MWDL
Series
MWDL - Low Profile Plastic Shell Micro-D
Contact Layout
9, 15, 21, 25, 31, 37, 51,
Contact Type
P - Pin Contacts S - Socket Contacts
Wire Gage (AWG)
4 - #24 5 - #25 6 - #26
Wire Type
C - Solid Copper
Wire Finish
3 - Solder Dipped (Sn60/Pb40) 4 - Gold-plated
Wire Length (Inches)
.125, .250, .500, 1.000, 1.500, 2.000 Wire Length In Inches
Mounting Hardware
B, M, M1, S, S1, P, See Table I
-31
S
-4
C
4
-.250
B
E F G H J
Table I: Mounting Hardware B
P
D
M
M1
S
S1
K L M
Thru-Hole
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-19 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Solid Wire Termination Table II: Dimensions
A
A B C
B
D
C
D J .096/.088 (2.43/2.23) DIA.
D
J K L M N P Q
SOCKET CONNECTOR
LENGTH + 0.2/-0.0 (+5.08/-0.0)
E F
J
H
PIN CONNECTOR
F H
H
.100/.088 (2.54/2.24)
E G
LENGTH + 0.2/-0.0 (+5.08/-0.0)
G A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
D Max.
E Max.
F Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53
.408 .408 .558 .558 .708 .708 .808 .808 .958 .958 1.108 1.108 1.058 1.058
10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87
.173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220
4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 3.40 5.64 4.50 6.60
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force
G Max.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Materials and Finishes Insulator Pin Contact Socket Contact Hardware Encapsulant
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide(PPS) Beryllium Copper, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-20 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Back-To-Back Cables Factory terminated "back-to-back" jumper cables simplify ordering and reduce assembly labor. Contacts are crimped to wire and potted with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Glassfilled high temperature thermoplastic connector body. M22759/11 standard wire, or M22959/33 lightweight, high strength space grade wire. Meets performance requirements of MIL-DTL-83513, Class P. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C. How To Order Sample Part Number
MWDL
-37
GP
-6
K
1
-18
P
A B C D
Series
MWDL - Low Profile Plastic Shell Micro-D
Contact Layout
9, 15, 21, 25, 31, 37, 51 (See Table II)
E
Connector Type
GP - Pin Connector Both Ends GS - Socket Contacts Both Ends CS - Pin Connector to Socket Connector
F
Wire Gage (AWG)
4 - #24 6 - #26 8 - #28 0 - #30 (J Wire Only)
G
Wire Type
K Standard Wire Extruded PTFE per M22759/11, Silver-Plated Conductors (#30 AWG not available) J - Space Grade Wire High Strength, Lightweight, Crosslinked Modified ETFE per M22759/33 Silver-Plated Conductors
Wire Color Code
1 - White 5 - Color-Coded per MIL-STD-681. Wires 1-10 are solid color, 11 and up are striped 7 - 10 Color Repeat, wires are solid color per MIL-STD-681color code system.
Wire Length (Inches)
18 - 18 inches (2" minimum for 2 rows, 3" minimunm for 3 rows).
Mounting Hardware
B, M, M1, S, S1, P (See Table I)
H J K
Table I: Mounting Hardware B
P
M
M1
S
S1
L M N
Thru-Hole
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-21 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Back-To-Back Cables Table II: Dimensions
A
Wire Length +1.00/-0.00 (+25.4/-0.0)
B
2Xø.096/.088 (2.44/2.24)
D
C D E
G
E
F
J
F
G H J K L M N P Q
A
B
C
H A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S
In.
mm.
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
B
C Max.
In .
mm.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
± .003 ± 0.08
D Max.
E Max.
F Max.
INDEX
© 2013 Glenair, Inc.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53
.408 .408 .558 .558 .708 .708 .808 .808 .958 .958 1.108 1.108 1.058 1.058
10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87
.173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220
4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60
Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force
G Max.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
Materials and Finishes Insulator Pin Contact Socket Contact Hardware Encapsulant
High Performance Micro-D Connectors and Cables
Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide(PPS) Beryllium Copper, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-22 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Right Angle PCB Termination Low profile MWDL connectors have reduced flange height compared to standard MWDM Micro-D connectors. These thru-hole “CBR” style Micro-D connectors have solder dipped leads, gold-plated leads optional on .100" centers. Connectors are backfilled with epoxy. Pin contacts are gold-plated high performance TwistPin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Stainless steel hardware. Optional #2-56 threaded inserts in board mounting holes. Glass-filled LCP thermoplastic insulators and tray withstand immersion in +260C solder for 10 seconds. Meets performance requirements of MIL-DTL-83513, Class P. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +150°C.
How To Order Right Angle PCB Connector Sample Part Number
MWDL
-21
S
CBR
P
T
.110 -513
B C D E F
Series
MWDL - Low Profile Plastic Shell Micro-D
Contact Layout
9, 15, 21, 25, 31, 37, 51
Contact Type
P- Pin Contacts S - Socket Contacts
Termination Type
CBR - Condensed Board Right Angle
Hardware Option
(Omit for None) P – Jackpost Jackposts for Rear Panel Mounting R1 – .032” Panel R2 – .047” Panel R3 – .062” Panel (See Table I) R4 – .093” Panel R5 – .125” Panel R6 – .125" Panel
Threaded Insert Option
Omit - For Thru-Holes T - Threaded Inserts in Board Mounting Holes. #2-56 Female Thread. M - Threaded Inserts in Board Mounting Holes. M2 Metric Thread.
PC Tail Length
.110, .125, .150, .190, .250
Gold-Plated Terminal Mod Code
Omit - These connectors are solder-dipped in 60/40 tin lead solder. To delete the solder dip and change to gold-plated terminal add code 513
G H J K L
Table I: Jackpost Options No Designator
A
P
R1 Thru R5
M
Panel
N
THREADED INSERT
Standard Jackpost Factory installed, not intended for removal.
Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compound.
Q INDEX
Thru-Hole For use with Glenair jackposts only. Order hardware separately. Install with threadlocking compound.
P
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-23 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Right Angle PCB Termination Table I: Dimensions
A
A
B
B
D
C
J PC TAIL LENGTH ±.015 (0.38)
D E
F
Ø.094 (2.39) #2-56 UNC-2B or 2mm
G J K L M N P Q
ø.022/.018 (0.56/0.46)
G
C
E
F H
H
A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
B
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.788 .788 .938 .938 1.088 1.080 1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
20.02 20.02 23.83 23.83 27.64 27.64 30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
D Max.
E
F Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030
7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .300 .300
6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.62 7.62
.425 .425 .425 .425 .425 .425 .425 .425 .525 .525 .525 .525 .660 .660
10.80 10.80 10.80 10.80 10.80 10.80 10.80 10.80 13.34 13.34 13.34 13.34 16.76 16.76
.202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
Performance Specifications
INDEX
Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force
© 2013 Glenair, Inc.
G Max.
3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts)
H
J
In . mm. ± .010 ± 0.25 .230 .230 .130 .130 .130 .130 .130 .130 .130 .130 .130 .130 .150 .150
5.84 5.84 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.81 3.81
In.
mm.
.134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60
Materials and Finishes Connector Body Pin Contact Socket Contact Hardware Encapsulant
High Performance Micro-D Connectors and Cables
Liquid Crystal Polymer (LCP), Glass-filled Beryllium Copper, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating 300 Series Stainless Steel Epoxy
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-24 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Right Angle PCB Termination MWDL CBR PCB Layouts — Pin Connectors .565 (14.35) .250 (6.35)
1.115 (28.32)
.158 (4.01)
.250 (6.35)
.020 (0.51)
.020 (0.51) 4
2
1 6
7
1
8
3
2
5
19 18
.100 (2.54) TYP .050 (1.27) TYP
6
8
5
17
9
.083 (2.11) .100 (2.54)
4 3
7 21
20
23
4
1 9
3 10
5 12
11
29 28
16
.100 (2.54) TYP
D
6
1.265 (321.13) .250 (6.35)
.020 (0.51)
1
3 2
8 14
20
15
.050 (1.27) TYP
22 21
.100 (2.54) TYP
2X .100 (2.54)
5 4
7
9
6 24
23
11
8
10
26 25
28
13 12
29
27
15 14
31 30
17 16
33 32
35
G
37 36
.100 (2.54) TYP .050 (1.27) TYP
3X .100 (2.54)
15 PIN
37 PIN
.865 (21.97)
K
.250 (6.35) 2 1 12
3 14
5 4 16
15
13
7
17
19 20
1 19
21
.050 (1.27) TYP
36
.250 (6.35) 3
2 1 14
2X .100 (2.54)
© 2013 Glenair, Inc.
5
17
15 16
6
4
18
7 19
10
8 9 20
5 23
22 37
25
41 26
39
27 9
7
24 38
8
10 43
42 40
12 46
45 44
13
11
15 14
29 28
47
16 31
30 48
17
35
33
32 49
.300 (7.62)
18
34 50
51
.100 (2.54) TYP .050 (1.27) TYP
22 21
11
12 24
L M
51 PIN
N
1. Patterns shown are for connector mounting side of PC board. 2. Board mounting holes are .094" (2.39) diameter. 3. PC tails are .022" (0.56) maximum diameter.
P
Notes
.965 (24.51)
.020 (0.51)
21
6
4X .100 (2.54)
21 PIN .083 (2.11)
4 3
20
.100 (2.54) TYP
2X .100 (2.54)
2
11
9
18
.050 (1.27)
10
8
6
13
23 25
.100 (2.54) TYP .050 (1.27) TYP
25 PIN
High Performance Micro-D Connectors and Cables
Q INDEX
.020 (0.51)
H J
1.215 (30.86)
.108 (2.74)
.083 (2.11)
E F
19 18
34
B C
30 31
.050 (1.27) TYP
.183 (4.65)
7
13
27 26
15 14
31 PIN
.250 (6.35) 2
25
13 12
3X .100 (2.54)
.715 (18.16)
.020 (0.51)
11 10
22
9 PIN
.108 (2.74)
9 24
A
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-25 E-Mail:
[email protected]
Micro-D Double and Triple Row
MWDL Low Profile Plastic Shell Micro-D Right Angle PCB Termination MWDL CBR PCB Layouts — Socket Connectors
A B C D E F G
K L M
.020 (0.51)
.020 (0.51) 5
4
9
2
8
15 16
1
3
7
13 14
30
6
.083 (2.11) .100 (2.54)
.050 (1.27) TYP
11
12
29 31
.100 (2.54) TYP
9
10
27 28
7
5
8 15
4
6 14
13
3 11
10
19
9
17
37
15
16 35
36
13
14
.250 (6.35)
21
9
20
7 19
3
17 18
33 34
31 32
10 29
28
26 27
30
14
24 25
12
17
35
51
14 31
33 32 50
13
15 16
34
.050 (1.27) TYP
29 30
49
11 12 46 28
48
9 43
45 47
8
27 10
21 Socket
44
25
41 42
26 40
Q
25
INDEX
2X .100 (2.54)
11
10 22
23
8 9
21
6 7
20
4
3
5 19
4
2
5
3 23
24 39
21 22
38
.300 (7.62)
1 19 20 37
36
.100 (2.54) TYP .050 (1.27) TYP
Notes .250 (6.35)
24
20 21
51 Socket
.965 (24.51)
12
22 23
6 7
3X .100 (2.54)
13
2
1.215 (30.86)
18
.100 (2.54) TYP
.020 (0.51)
1
4
.100 (2.54) TYP .050 (1.27) TYP
.108 (2.74)
1
13
15
2X .100 (2.54)
.083 (2.11)
3
5 6
8
3X .100 (2.54)
.050 (1.27)
2
4 16
18
7
9
11
12
.865 (21.97)
11
20
37 Socket
.083 (2.11)
5
22
1 17
.250 (6.35)
15 Socket
6
3 19
1.265 (321.13)
.100 (2.54) TYP
8
5 21
.050 (1.27) TYP
18
.050 (1.27) TYP
10
2
.100 (2.54) TYP
.183 (4.65)
1
2X .100 (2.54)
.020 (0.51)
7 23
3X .100 (2.54)
.020 (0.51)
2
12
4
31 Socket
.250 (6.35) .020 (0.51)
6
24
26
.715 (18.16)
.108 (2.74)
8
25
9 Socket
N P
.250 (6.35)
.250 (6.35)
H J
1.115 (28.32)
.158 (4.01)
.565 (14.35)
17 18
16
2 15
1. Patterns shown are for connector mounting side of PC board. 2. Board mounting holes are .094" (2.39) diameter. 3. PC tails are .022" (0.56) maximum diameter.
1
14
.100 (2.54) TYP .050 (1.27) TYP
25 Socket © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-26 E-Mail:
[email protected]
Micro-D Combo
Product Selection Guide Glenair’s Combo Micro-D's combine the size and weight advantages of a Micro -D connector with the added ability to handle higher power needs. These connectors feature combinations of .079 inch (2mm) power contacts and TwistPin signal contacts.
New and now available: Right angle GMPM combo power and signal PCB Micro-D connectors. Consult factory for ordering information.
13 Amp Current Rating – Available in three styles: solder cup, pre-wired pigtails or printed circuit board, these Micro-D connectors handle up to #16 AWG wire. Introducing The GMPM Right Angle Combo Micro-D – our newest addition adds right angle mount PCB board mount capability to our combo high power and signal offerings. Consult the factory for ordering information.
GMPM Combo Solder Cup Page F-4
Combo Micro-D Solder Cup Connectors Nonremovable solder cup #16 power contacts for termination to #16 AWG or smaller wire. Micro pins accept #26 AWG or smaller wire. Gold plated contacts are backfilled with rigid epoxy.
GMPM Combo Pre-Wired Page F-7
Combo Micro-D Pre-Wired Pigtails Crimp contacts are terminated to insulated Teflon® wire. Connectors are backpotted with epoxy, providing strain relief and environmental protection.
GMPM Combo Vertical Mount PCB Page F-10
Combo Micro-D Printed Circuit Board Ideal for flexible or rigid circuits, these vertical mount connectors feature high temperature materials to withstand soldering heat. A full range of hardware options is available.
GMPM Combo 90° mount PCB Page F-13
Combo Micro-D Printed Circuit Board Ideal for flexible or rigid circuits, these 90° mount plug and receptacle connectors feature high temperature materials to withstand soldering heat. A full range of hardware options is available.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-1 E-Mail:
[email protected]
A B C D E F G H J K L M N P Q INDEX
Setion F Combo Micro-D for High Power Applications
Micro-D Combo
GMPM Combo Micro-D for High Power Applications
Shell Size and Contact Arrangements - Mating Face View
A
PLUG
B
A
C D
B112
B
B
C
1
2
3
A
D112
3 POWER CONTACTS
5
G
A
B
C
D
H
1
2
3
4
A
J
B
5
K
E112
2
1
4
3
2
1
C
B
8 15 9 8
7
M
2
A4 B C5 D E 6 F
N P
22
2
1
E D C B A 6
5
4
8 9 10 11 12 13
13 12 11 10 9 8 7 6 5 4 3 2 1
14
16 15
INDEX
© 2013 Glenair, Inc.
20 19 18 17 16 13 11
21
F
G103
6 POWER CONTACTS 6 MICRO CONTACTS
C D
B
14 12 10 6 5 4 3 2 1
7
1 2 3 4 5 6 7
A B
A
5
D C B A
G101
4 POWER CONTACTS 22 MICRO CONTACTS
3
A 6
3 1
4
A
15
22
5
B
8 9
21
A
C
E113
8
7
16 17 18 19 20 11 13
3
D
3 POWER CONTACTS 8 MICRO CONTACTS
A B C D
L
Q
7
10 12 14 1 2 3 4 5 6
A
6
4 POWER CONTACTS
C
6
B
B
2 POWER CONTACTS 6 MICRO CONTACTS
6
A
C
D113
B
4
B
2 POWER CONTACTS
A
E F
RECEPTACLE
C
18 17
20 19
D
D C
G111
4 POWER CONTACTS 20 MICRO CONTACTS
E
F
J112
6 POWER CONTACTS
High Performance Micro-D Connectors and Cables
B A 20
18 19
F
E
16 17
D
U.S. CAGE Code 06324
14 15
C
B
A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-2 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Panel Mount Cutouts
Recommended Panel Cutout for Shell Sizes B, D, E, and J
A
B
B
R
Full Radius
+ 0.002 (+ 0.05) Ø 0.125(3.18) − 0.000 (− 0.00)
C
+ 0.004 (+ 0.10) 0.316 (8.02) − 0.000 (− 0.00)
D
+ 0.002 (0.05) R 0.100 (2.54) − 0.000 (0.00)
E
Dimensions B
F
R
Shell Size
In . ± .003
mm. ± 0.08
In. + .004 - .000
B D E J
.715 .965 1.115 1.615
18.16 24.51 28.32 41.02
.550 .800 .949 1.449
mm. +0.06 -0.00 13.95 20.30 24.11 36.81
G H J K
Recommended Panel Cutout for Shell Size G
L
1.215±0.003 (30.86±0.08) Ø0.126 ±0.002 (Ø3.20 ±0.05)
M
1.060 ±0.002 (26.92 ±0.05)
N R0.063(1.60) (4 Pos)
0.300±0.005 (7.62±0.13)
P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-3 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Solder Cup
13 Amp Current Rating– Combo Micro-D's combine the size and weight advantages of a Micro -D connector with the added ability to handle higher power needs.
A B
Solder Cup Contacts– Gold plated beryllium copper power contacts accommodate up to #16 AWG stranded wire. Signal contacts accept up to #26 AWG wire.
C
Mil Spec Performance– Glenair combo Micro-D connectors comply with the requirements of MILDTL-83513 and feature excellent resistance to high temperatures, shock and vibration.
D E F G
How To Order Combo Solder Cup Micro-D Sample Part Number Series
K L
-G111
P
S
B
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Shell Finish
G103P
Plug Connector with TwistPin signal contacts and socket 2mm power contacts
Stainless Steel Shell 3 - Passivated
Shell Size and Insert Arrangement
B112, D112, D113, E112, E113, G101, G103, G111, J112 See Insert Arrangements on Page F-2
Shell Style
P - Plug R - Receptacle
Termination Type
S - Solder Cup
Hardware
B, P, M, M1, S, S1, L, K, F, R, H
M N
2
GMPM
H J
GMPM
G103R
Receptacle Connector with socket TwistPin signal contacts and male 2mm power contacts Table I: Mounting Hardware
B
P
M
M1
S
S1
L
K
F
R
H
Thru-Hole
Jackpost #2-56
Hex Head Jackscrew #2-56
Hex Head Jackscrew, Extended #2-56
Slot Head Jackscrew #2-56
Slot Head Jackscrew, Extended #2-56
Hex Head Jackscrew NonRemovable #2-56
Slot Head Jackscrew NonRemovable Extended
Float Mount For Front Panel Mounting
Float Mount For Rear Panel Mounting
Threaded Insert #2-56
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-4 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Solder Cup
Table II: Dimensions for Shell Size G Connectors
A
0.093 (2.36)
B C
.110 (2.79) Max.
A
Section A-A
1.44 (36.45) Max
E
A
0.310 (7.87) Max
D
0.2 (5.08) Max
E
1.215 (30.86) (0.351) 8.92
C Max.
F G D Max. C Max Layout G101P G101R G103P G103R G111P G111R
D Max
H
E ±0.10
In.
mm.
In.
mm.
In.
mm.
0.983 1.051 0.983 1.051 0.983 1.051
24.97 26.70 24.97 26.70 24.97 26.70
0.228 0.296 0.228 0.296 0.228 .296
5.79 7.52 5.79 7.52 5.79 7.52
0.183 0.195 0.183 0.195 0.183 0.195
4.65 4.95 4.65 4.95 4.65 4.95
Performance Specifications
Materials and Finishes
3 AMP Signal Contacts 13 AMP .079" (2mm) Power Contacts
Connector Shell
Aluminum Alloy 6061. See Ordering Info for Plating Options.
Dielectric Withstanding Voltage
600 VAC Sea Level 150 VAC 70,000 Feet
Insulator Interfacial Seal
Liquid Crystal Polymer (LCP) Fluorosilicone Rubber, Blue
Insulation Resistance Contact Resistance
5000 Megohms Minimum 8 Milliohms Maximum Signal Contacts
Pin Contact, TwistPin
Copper Alloy with 50 Microinches Gold over Nickel Plating
Low Level Contact Resistance
32 Milliohms Maximum Signal Contacts
Socket Contact
Copper Alloy with 50 Microinches Gold Over Nickel Plating
Magnetic Permeability Operating Temperature Shock Vibration Mating Force Power Contacts
2 µ Maximum -55° C. to +150° C. 50 g. 20 g. (10 Ounces) X (# of Contacts) (28 oz) x (# of contacts)
© 2013 Glenair, Inc.
K L M N P
Pin Contact, 2mm. Power
Brass With 50 Microinches Gold Over Nickel Plating
Skt. Contact. 2mm. Power
Beryllium Copper With 50 Microinches Gold Over Nickel Plating
Q
Hardware PCB Terminals Encapsulant
300 Series Stainless Steel Gold-Plated Copper Alloy, Solder Dipped Epoxy
INDEX
Current Rating
J
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-5 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Solder Cup
Table III: Dimensions for Shell Size B, D, E and J Connectors
A
0.093 (2.36)
G Max
B C D
J Max
A Max B
0.315 (8.00) Max
E
0.276 (7.0) Max
0.11 (2.8) max
C Max
D Max
F G H J K L M
A Max. Layout B112P B112R D112P D112R D113P D113R E112P E112R E113P E113R J112P J112R
B
In.
mm.
In . ± .003
.935 .935 1.185 1.185 1.185 1.185 1.335 1.335 1.335 1.335 1.835 1.835
23.75 23.75 30.10 30.10 30.10 30.10 33.91 39.91 33.91 33.91 46.61 46.61
.715 .715 .965 .965 .965 .965 1.115 1.115 1.115 1.115 1.615 1.615
C Max.
D Max.
G Max.
J Max.
mm. ± 0.08
In.
mm.
In.
mm.
In.
mm.
In.
mm.
18.16 18.16 24.51 24.51 24.51 24.51 28.32 28.32 28.32 28.32 41.02 41.02
.481 .547 .731 .798 .731 .798 .881 .948 .881 .948 1.381 1.448
12.21 13.92 18.56 20.27 18.56 20.27 22.37 24.08 22.37 24.08 35.07 36.78
.242 .315 .242 .315 .242 .315 .242 .315 .242 .315 .242 .315
6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90
.184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197
4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01
N P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-6 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Pre-Wired
13 Amp Current Rating– Combo Micro-D's combine the size and weight advantages of a Micro -D connector with the added ability to handle higher power needs. Pre-Wired And Potted with Epoxy– Gold plated power contacts accommodate up to #16 AWG stranded wire. Signal contacts accept up to #24 AWG wire. Mil Spec Performance– Glenair combo Micro-D connectors comply with the requirements of MIL-DTL-83513 and feature excellent resistance to high temperatures, shock and vibration. How To Order Pre-wired Micro-D Power Connectors Sample Part Number
GMPM
Series
GMPM
Shell Finish
Stainless Steel Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Shell Size and Insert Layout
B112, D112, D113, E112, E113, J112
Shell Style
P = Plug R = Receptacle
Cable Entry Style
T - Top Entry
2 - Nickel 5 - Gold
2-
B112
P
T
4
-18
K
7-
460
B
Wire Type
Wire Color
1 - White 2 - Yellow 5 - Color-Coded per MIL-STD-681 7 - 10 Color Repeat Wires are solid color per MIL-STD-681 color code system. Note: #16 and #18 wire is always white. Wire colors apply to signal wire only.
Wire Length (mm)
460 - Wire length In millimeters, rounded up to the nearest 10 mm.
Hardware
B, P, M, M1, S, S1, L, K, F, R, H
M1
D E
H
K - M22759/11 600 Vrms Teflon® (TFE)
M
C
G J
Wire Gage for #16 Contacts 16, 18, 20 (AWG)
P
B
F
Stainless Steel Shell 3 – Passivated
Wire Gage for #24 Contacts 4 - #24 6 - #26 8 - #28 0 - #30 (AWG) Omit for D112 and B112 layouts containing power contacts only.
B
A
J - M22759/33 600 Vrms Modified Cross-Linked Tefzel® (ETFE)
E - NEMA HP3-EB 600 Vrms Type E M16878/4 (TFE)
Table I: Mounting Hardware S S1 L
F - NEMA HP3-ETB Type ET M16878/6 250 Vrms
K
Note: power contacts supplied white only
L M
K
F
R
H
N P
Jackpost
© 2013 Glenair, Inc.
Hex Head Jackscrew
Hex Head Jackscrew, Extended
Slot Head Jackscrew
Slot Head Jackscrew, Extended
Hex Head Jackscrew NonRemovable
High Performance Micro-D Connectors and Cables
Slot Head Jackscrew NonRemovable Extended
Float Mount For Front Panel Mounting
U.S. CAGE Code 06324
Float Mount For Rear Panel Mounting
Threaded Insert
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-7 E-Mail:
[email protected]
Q INDEX
Thru-Hole
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Pre-Wired
Table II: Dimensions for Shell Size G Connectors
A
1.040 (26.42) Max.
Wire Length
B C D
0.378 (9.60)
E F
1.44 (36.45) Max 1.215 (30.86)
D Max.
C Max.
0.351 (8.92)
PRE-WIRED CONNECTOR DIMENSIONS FOR SHELL SIZE G
G H
C Max Layout
J
G101P G101R G103P G103R G111P G111R
K L M N P Q
D Max
In.
mm.
In.
mm.
0.983 1.051 0.983 1.051 0.983 1.051
24.97 26.70 24.97 26.70 24.97 26.70
0.228 0.296 0.228 0.296 0.228 .296
5.79 7.52 5.79 7.52 5.79 7.52
Performance Specifications
Materials and Finishes
INDEX
Current Rating
3 AMP Signal Contacts 13 AMP .079" (2mm) Power Contacts
Connector Shell
Aluminum Alloy 6061. See Ordering Info for Plating Options.
Dielectric Withstanding Voltage
600 VAC Sea Level 150 VAC 70,000 Feet
Insulator Interfacial Seal
Liquid Crystal Polymer (LCP) Fluorosilicone Rubber, Blue
Insulation Resistance Contact Resistance Low Level Contact Resistance Magnetic Permeability Operating Temperature Shock Vibration Mating Force Power Contacts
5000 Megohms Minimum 8 Milliohms Maximum Signal Contacts 32 Milliohms Maximum Signal Contacts 2 µ Maximum -55° C. to +150° C. 50 g. 20 g. (10 ounces) x (number of contacts) (28 ounces) x (number of contacts)
Pin Contact, TwistPin
Copper Alloy with 50 Microinches Gold over Nickel Plating
© 2013 Glenair, Inc.
Socket Contact,
Copper Alloy with 50 Microinches Gold Over Nickel Plating
Pin Contact, 2mm. Power
Brass With 50 Microinches Gold Over Nickel Plating
Skt. Contact. 2mm. Power
Beryllium Copper With 50 Microinches Gold Over Nickel Plating
Hardware PCB Terminals Encapsulant
300 Series Stainless Steel Gold-Plated Copper Alloy, Solder Dipped Epoxy Resin
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-8 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications Pre-Wired
Table III: Dimensions for Shell Size B, D, E and J
A
H Max
0.093 (2.36) G Max
0.270(6.86) Max
Wire Length
0.378 (9.60) Potting
B C D
J Max
E
A Max 0.315 (8.00) Max
B
D Max
F
C Max
G A Max. Layout B112P B112R D112P D112R D113P D113R E112P E112R E113P E113R J112P J112R
B
In.
mm.
In . ± .003
.935 .935 1.185 1.185 1.185 1.185 1.335 1.335 1.335 1.335 1.835 1.835
23.75 23.75 30.01 30.01 30.01 30.01 33.91 39.91 33.91 33.91 46.61 46.61
.715 .715 .965 .965 .965 .965 1.115 1.115 1.115 1.115 1.615 1.615
C Max.
D Max.
G Max.
H Max.
J Max.
mm. ± 0.08
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
18.16 18.16 24.51 24.51 24.51 24.51 28.32 28.32 28.32 28.32 41.02 41.02
.481 .547 .731 .798 .731 .798 .881 .948 .881 .948 1.381 1.448
12.21 13.92 18.56 20.27 18.56 20.27 22.37 24.08 22.37 24.08 35.07 36.78
.242 .315 .242 .315 .242 .315 .242 .315 .242 .315 .242 .315
6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90
.550 .550 .800 .800 .800 .800 .950 .950 .950 .950 1.450 1.450
13.97 13.97 20.32 20.32 20.32 20.32 24.13 24.13 24.13 24.13 36.83 36.83
.184 .197 .184 .197 .184 .197 .184 .197 .184 .197 .184 .197
4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01
H J K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-9 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications
Vertical Mount Printed Circuit Board 13 Amp Current Rating – Combo Micro-D's combine the size and weight advantages of a Micro -D connector with the added ability to handle higher power needs.
A B
Printed Circuit Board Terminals– Ideal for flexible circuits or rigid boards, these gold plated PC tail contacts are sealed with epoxy encapsulant and are non-removable.
C D E F
How To Order Vertical Mount PCB Combo Micro-D Connectors Sample Part Number Series
GMPM
Shell Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Shell Size and Insert Arrangement
B112, D112, D113, E113, G103
G H J K
P – Plug
N
2
B112
R
CBS
PN
-.109
Stainless Steel Shell 3 – Passivated
R – Receptacle
Shell Style
Termination Style
CBS - Compact Vertical Mount
Hardware
NN – No Jackpost, No Threaded Insert PN – Extended Jackpost for .062" (1.6) PCB, No Threaded Insert RN – Extended Jackpost for .196" (5.0) PCB, No Threaded Insert NU – 2-56 UNC Threaded Insert, No Jackposts NM – Metric M2 Threaded Insert, No Jackposts SU – Short Jackpost, 2-56 UNC Threaded Insert SM – Short Jackpost, M2 Metric Threaded Insert
PC Tail Length
.109, .150, .172, .190, .250 Length in Inches ± .015 (0.38)
L M
GMPM
Rear Panel Jackposts Supplied either with U style 2-56 UNC or M style M2 Threaded Inserts TU or TM – 0.094" (2.4) Panel VU or VM – 0.062" (1.6) Panel WU or WM – 0.047" (1.2) Panel XU or XM – 0.031" (0.8) Panel XU or XM – 0.023" (0.6) Panel
Table I: Jackpost Options NN
PN and RN
NU, NM
SU, SM
TU,VU,WU,XU,YU TM,VM,WM,XM,YM
Threaded Inserts
Jackpost With Threaded Insert
Jackpost for Rear Panel Mounting
P Q
PC BOARD
INDEX
Thru-Hole
© 2013 Glenair, Inc.
Jackpost Kit PN – .062 (1.6) PCB RN – .196 (5.0) PCB
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-10 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications
Vertical Mount Printed Circuit Board Table II: Dimensions For Shell Size B, D, E and G
A
A
B
B C
C
D
E
D .096/.088 (2.44/2.24) (See Table I) DIA. 2 PLCS.
E
J
F
G
G
Tail Length .172 (4.37) ± .015 (0.38)
H
.079 (2.0) ± .002 (0.05) .020 (0.51) ± .002 (0.05)
A Max. Layout B112P B112R D112P D112R D113P D113R E113P E113R G103P G103R
In.
mm.
.935 .935 1.185 1.185 1.185 1.185 1.335 1.335 1.435 1.435
23.75 23.75 30.01 30.01 30.01 30.01 33.91 33.91 36.45 36.45
B
J
C Max.
D Max.
E Max.
G Max.
J Max.
In .
± .003
mm. ± 0.08
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.715 .715 .965 .965 .965 .965 1.115 1.115 1.215 1.215
18.16 18.16 24.51 24.51 24.51 24.51 28.32 28.32 30.86 30.86
.481 .547 .731 .798 .731 .798 .881 .949 .983 1.051
12.21 13.92 18.56 20.27 18.56 20.27 22.37 24.11 24.97 26.70
.242 .315 .242 .315 .242 .315 .242 .315 .228 .296
6.15 8.00 6.15 8.00 6.15 8.00 6.15 8.00 5.79 7.52
.315 .315 .315 .315 .315 .315 .315 .315 .351 .351
8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.92 8.92
.355 .355 .355 .355 .355 .355 .355 .355 .355 .355
9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02
.184 .197 .184 .197 .184 .197 .184 .197 .184 .195
4.68 5.01 4.68 5.01 4.68 5.01 4.68 5.01 4.68 4.95
K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-11 E-Mail:
[email protected]
Micro-D Combo
Power and Combo Micro-D for High Power Applications
A
Vertical Mount Printed Circuit Board
Power and Combo Micro-D PCB Layouts
Patterns shown are for connector mounting side of PC board.
Plated thru-holes to accept .081 (2.06) maximum diameter power pins marked A - C, and .022(.56) maximum diameter signal pins marked 1 – 8.
B C
Plug Connectors .108 (2.74)
.096 (2.44) DIA REF
.096 (2.44) DIA REF
C L
A
C L
.216 (5.49)
B
C
C
.096 (2.44) DIA REF
.096 (2.44) DIA REF C L
.098 (2.49)
3
2
1
C L
.108 (2.74)
.108 (2.74)
A 4 .216 (5.49) 2 PLCS
5
B
.108 (2.74)
.108 (2.74)
6
1
2
3 B
6
5 A
.965 (24.51)
.096 (2.44) DIA REF
.096 (2.44) DIA REF C L
L
.098 (2.49)
E113
C L .108 (2.74) 2 PLC S
.216 (5.49) 1
2
3
A 6 B 5 .216 (5.49) .216 (5.49) 2 PLCS
.098 (2.49)
4 C
7
8
.108 (2.74) 2 PLC S
.216 (5.49) 3
4
G103
Q
A
B
C
D 5
.150 (3.81) .075 (1.91)
5
.276 (7.00) .276 (7.00)
INDEX
1.215 (30.86)
E
3 F
F
.13 (3.18) C .13 (3.18) L 2 1 E
6
6 .150 (3.81) .150 (3.81)
.242 (6.14)
.096 (2.44) DIA REF
© 2013 Glenair, Inc.
A
6
1.115 (28.32 ) .096 (2.44) DIA REF
.13 (3.18) C .13 (3.18) L 2 3
4
B
1
.216 (5.49) .216 (5.49) 2 PLCS
.276 (7.00) .276 (7.00)
1
2
C 7
8
1.115 (28.32 ) .096 (2.44) DIA REF
N
4
.216 (5.49) 2 PLCS
.965 (24.51)
K
A
.965 (24.51)
.965 (24.51)
D113
B
.216 (5.49)
.216 (5.49)
H
P
.715 (18.16)
D112
.098 (2.49)
A
B
.715 (18.16)
.216 (5.49)
G
M
.108 (2.74)
B
A
E
J
C L
.108 (2.74)
.108 (2.74)
B112
D F
Receptacle Connectors
C L
High Performance Micro-D Connectors and Cables
D
C 5
.150 (3.81) 0.075 (1.91) 1.215 (30.86)
B
A 4 .150 (3.81) .150 (3.81)
.242 (6.14)
.096 (2.44) DIA REF
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-12 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications 90° Mount Printed Circuit Board
13 Amp Current Rating – Combo Micro-D's combine the size and weight advantages of a Micro -D connector with the added ability to handle higher power needs. Printed Circuit Board Terminals– Ideal for flexible circuits or rigid boards, these gold plated PC tail contacts are sealed with epoxy encapsulant and are non-removable. How To Order 90° Mount PCB Combo Micro-D Connectors Sample Part Number
GMPM
2
D112
R
CBRT
TU
.109
A B C D
Series
GMPM
Shell Finish
Aluminum Shell 1 - Cadmium 2 - Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film
Shell Size and Insert Arrangement
B112, D112, D113, E112, E113, J112
Shell Style
P – Plug R – Receptacle
Termination Style
CBRT – 90° with Encapsulating Tray Note all combo (power/signal connectors are supplied as CBRT Style)
G
NU – 2-56 UNC Mounting Threads, No Jackposts NM – M2 Metric Mounting Threads, No Jackposts SU – Hex Jackpost, 2-56 UNC Mounting Threads SM – Hex Jackpost, M2 Mounting Threads
H
Stainless Steel Shell 3 – Passivated
F
Hardware
PCB Thickness Power Contacts (Pin)
E
Rear Panel Mount Supplied either with U style 2-56 UNC Mount or M style metric mount, M2 Threaded Inserts TU or TM – 0.094" (2.4) Panel VU or VM – 0.063" (1.6) Panel WU or WM – 0.047" (1.2) Panel XU or XM – 0.031" (0.8) Panel YU or YM – 0.025" (0.65) Panel ZU or ZM – 0.079" (2.0) Panel RU or RM – 0.059" (1.5) Panel
J K
.109(2.77), .150(3.81), .190(4.83), .250(6.35) Length in Inches(mm) ± .015 (0.38)
L
Table I: Jackpost Options NU, NM
SU, SM
TU,VU,WU,XU,YU,ZU,RU TM,VM,WM,XM,YM,ZM,RM
M N P
Jackpost With Threaded Insert
Jackpost for Rear Panel Mounting with PCB Mounting Thread
Q INDEX
Threaded Inserts
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-13 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications 90° Mount Printed Circuit Board
Table II: Dimensions For Shell Size B, D, E and J
A B
Plug Shown : 0.242 (6.15) Max. Receptacle: 0.346 (8.80) Max. 0.346 (8.80) Max.
C
C D
0.184 (4.68)
A Max. B
.197 (5.00) .118 (3.00)
.189 (4.80)
.029 (.750)
Section View Showing Mounting Holes
PCB Thickness
E F
.256
(6.50)
G H
R 0.098 (2.50)
.409 (10.40)
J K L M N
A Max. Layout B112P B112R D112P & D113P D112R & D113R E112P & E113P E112R & E113R J112P J112R
B
In.
mm.
.935 .935 1.185 1.185 1.335 1.335 1.835 1.835
23.75 23.75 30.10 30.10 33.91 33.91 46.61 46.61
C Max.
In .
± .003
mm. ± 0.08
In.
mm.
.715 .715 .965 .965 1.115 1.115 1.615 1.615
18.16 18.16 24.51 24.51 28.32 28.32 41.02 41.02
.481 .550 .731 .800 .881 .950 1.381 1.450
12.21 13.92 18.56 20.27 22.37 24.08 35.07 36.81
P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-14 E-Mail:
[email protected]
Micro-D Combo
GMPM Power Micro-D for High Power Applications 90° Mount Printed Circuit Board
A
Power Micro-D 90° PCB Layouts Patterns shown are for connector mounting side of PC board. Plated thru-holes to accept .081(2.06) maximum diameter power pins marked A - F
Plug Connectors
Ø.096 (2.44) Mount Hole (2 pos)
B
.715 (18.16)
Ø.096 (2.44) Mount Hole (2 pos)
.217 (5.50) .249 (6.33) Ref Only
0.256(6.50)
Ø0.096(2.44) Mount Holes (2 Pos)
C
B
0.965(24.50)
0.266(6.76) Ref Only
D112
0.108 (2.75) Ø.096 (2.44) Mount Holes (2 Pos)
D
B
A
E
D112
Ø.096 (2.44) Mount Holes (2 Pos)
L
1.615 (41.02)
C
0.217 (5.50) Pitch 0.266 (6.76) Ref Only
J112
6.50 (0.256)
A
B
C
D
0.217 (5.50) Pitch 0.233 (5.91) Ref Only
L
1.115 (28.32)
0.256 (6.50)
D
0.217(5.50) 0.266(6.76) Ref Only
E112
0.108 (2.75)
F
C
L
E112
Ø0.096 (2.44) Mount Holes (2 Pos)
B
0.108 (2.75)
0.217 (5.50) Pitch 0.233 (5.91) Ref Only
1.115 (28.32)
0.256(6.50)
0.965(24.50)
A
L
.217 (5.50) .249 (6.33) Ref Only
B112
0.217(5.50)
6.50 (0.256)
C
B L
Ø0.096(2.44) Mount Holes (2 Pos)
A
L
A
.715 (18.16)
B112
D
.256 (6.50)
.108 (2.75)
A
L
C
Receptacle Connectors
.256 (6.50)
.108 (2.75)
B
B
A
0.256 (6.50)
0.108 (2.75) Ø0.096 (2.44) Mount Holes (2 Pos) 1.615 (41.02)
A
B
C
D
E
F
E F G H J K L M N
L
0.217 (5.50) Pitch 0.266 (6.76) Ref Only
P
J112
INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-15 E-Mail:
[email protected]
Micro-D Combo
GMPM Combo Micro-D for High Power Applications 90° Mount Printed Circuit Board
A B
Combo Micro-D 90° PCB Layouts Patterns shown are for connector mounting side of PC board. Plated thru-holes to accept .081(2.06) maximum diameter power pins marked A - F and .022 maximum diameter signal pins marked 1 – 10.
C D E
Plug Connectors Ø.096 (2.44) Mount Hole (2 pos)
6 3
H
Ø.096 (2.44) Mount Hole (2 pos)
4 A
2
4
0.108(2.75) 0.217(5.50)
J
7 C
3
6 B
2
A
E113
0.098(2.50)
D113
5
1
1
0.256(6.50) 1.115(28.32)
0.965(24.51)
Ø.096 (2.44) Mount Hole (2 pos)
5
3
0.256(6.50)
0.098(2.50)
D113
2
6 B
0.108(2.75)
0.256(6.50)
8
5 A
1
0.965(24.51)
Ø.096 (2.44) Mount Hole (2 pos)
4
1
0.108(2.75)
F G
5 B
Receptacle Connectors
0.108(2.75) 0.217(5.50)
0.098(2.50)
6 A
2
7 B
3
8 C
4
0.256(6.50) 1.115(28.32)
E113
0.098(2.50)
K L M N P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-16 E-Mail:
[email protected]
C and Pi filter connectors
Micro-D Filtered connectors
MICRO−D For improved signal quality
O
ur Micro-D filter connectors serve double duty by also eliminating unwanted high–frequency noise. These connectors feature a precision milled aluminum shell and thermally conductive epoxy potting to prevent damage to filters during soldering. Configuration options include vertical and 90° printed circuit board orientations as well as time and cost saving solutions such as prewired pigtail filter connectors and in-line filter adapters. Glenair Micro-D connectors are in stock and available for immediate shipment.
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Micro-D Filter
Section G Micro-D MIL-DTL-83513 Type Filter Connectors Product Selection Guide
A
240-030 Page G-7
Solder Cup Filter Connector
240-031 Page G-9
Vertical PCB Micro-D Filter Connector
B C D
240-032 Page G-14
Insulated Wire Filter Connector
240-033 Page G-16
In-Line Filter Adapter
240-034 Page G-18
Right Angle PCB Micro-D Filter Connector
240-075 Page G-22
Rear Panel Mount Solder Cup Filter Connector
240-076 Page G-24
Rear Panel Mount Vertical PCB Filter Connector
K
Rear Panel Mount Insulated Wire Filter Connector
L
E F G H J
25S Receptacle Assembly
240-077 Page G-26 ylbmessA elcatpeceR S52
Rear Panel Mount Condensed Board Right Angle Filter Connector
M
247-379 Page G-30
Edge Board Micro-D Filter Connector
N
2470-1048 Page G-34
Combo Micro-D Filter connector
240-078 Page G-28 ylbmessA elcatpeceR S52
© 2013 Glenair, Inc.
Q
EMI Troubleshooter Kit for Micro-D Connectors
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
INDEX
249-EMITS-MICRO Page G-35
P
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-1 E-Mail:
[email protected]
Micro-D Filter
About Micro-D filter connectors
A
Glenair Filter Micro-D connectors are low-pass filters, transmitting DC and low frequency signals while attenuating unwanted high frequency noise. These connectors are available with C filter elements or Pi filters. The filter substrates are constructed with a ceramic planar capacitor array.
B
Glenair Filter Micro-D's meet the demanding performance requirements of MIL-DTL-83513, except for a reduction in the dielectric withstanding voltage rating to 250 volts DC (higher voltages available on request). The TwistPin contact system assures superior performance in the most demanding applications.
C
D
C Filter Single capacitor with low self inductance. This configuration is generally used to attenuate high frequency signals. The simple design allows high-frequency EMI to discharge to ground via the surrounding electromagnetic field. C filters occupy the least amount of space and offer lower cost compared to other filter types.
E
F
H
J
Micro-D Filter Connectors General Information
G
Pi Filter Dual capacitors with a ferrite inductor positioned between them. The Pi filter provides excellent high-frequency performance due to its sharper rolloff. Micro-D C Filter Attenuation and Capacitance Values C Filter
K
L
M
N
Filter Class
Capacitance pF
A B C D E F G J
19,000 — 28,000 16,000 — 22,500 9,000 — 16,500 4,000 — 6,000 1,650 — 2,500 400 — 650 200 — 300 35 — 60
1 MHz 6 5 3 — — — — —
No Load Insertion Loss (dB Minimum) 10 MHz 100 MHz 500–1000 MHz 24 41 50 23 39 49 16 35 46 8 28 41 4 21 34 — 10 23 — 5 17 — 1 8
Micro-D Pi Filter Attenuation and Capacitance Values Pi Filter
P
INDEX
Q © 2013 Glenair, Inc.
Filter Class
Capacitance pF
A B C D E F G J
38,000 — 56,000 32,000 — 45,000 18,000 — 33,000 8,000 — 12,000 3,300 — 5,000 800 — 1,300 400 — 600 70 — 120
High Performance Micro-D Connectors and Cables
No Load Insertion Loss (dB Minimum) 1 MHz 10 8 5 1 — — — —
10 MHz 40 35 25 14 8 2 0.8 —
100 MHz 62 60 57 50 40 15 13 4
U.S. CAGE Code 06324
500–1000 MHz 66 62 60 58 52 32 22 15
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-2 E-Mail:
[email protected]
Micro-D Filter
Micro-D Filter Connectors General Information Micro-D Filter Connector Contact Arrangements (Face View Pin Connector) 1
2
6
3
7
4
8
5
1
2
3
3
4
5
6
7
8
1
9 10 11 12 13 14 15
9
9 Contacts
1
2
2
5
6
7
8
4
5
6
7
8
B
9 10 11
C
12 13 14 15 16 17 18 19 20 21
21 Contacts
15 Contacts
4
3
9 10 11 12 13
1
14 15 16 17 18 19 20 21 22 23 24 25
2
3
4
5
6
7
8
D
9 10 11 12 13 14 15 16
E
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
31 Contacts
25 Contacts
F
CONTACT SPACING 1
2
3
4
5
6
7
8
.050 (1.27)
9 10 11 12 13 14 15 16 17 18 19
G
.0433 (1.01)
H
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
37 Contacts
J
.050 (1.27)
K
* Consult factory for filtered Micro-D connectors in other arrangements
Performance Specifications
© 2013 Glenair, Inc.
3 AMP 250 VDC 100 VDC 5000 Megohms Minimum 8 milliohms Maximum 32 milliohms Maximum 2 µ Maximum -55° C to +125° C 50 g. 20 g. (10 oz) x (# of Contacts) (See Table on Preceding Page)
Materials and Finishes Connector Shell
Aluminum Alloy 6061 or Stainless Steel, 300 Series, Passivated. See Ordering Info for Aluminum Plating Options.
Insulator Seals
Liquid Crystal Polymer (LCP) Fluorosilicone Rubber, Blue
Pin Contact
Beryllium Copper With 50 microinches Gold over Nickel Plating
Socket Contact
Copper Alloy With 50 microinches Gold Over Nickel Plating
Hardware
300 Series Stainless Steel
PCB Terminals
Gold-Plated Copper Alloy, Solder Dipped
Capacitors Inductors
Planar Ceramic Array Ferrite
EMI Ground Spring
Beryllium Copper, Gold Plated
Encapsulant
Thermally Conductive Epoxy
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
L M N P Q INDEX
Current Rating Dielectric Withstanding Voltage Working Voltage Insulation Resistance Contact Resistance Low Level Contact Resistance Magnetic Permeability Operating Temperature Shock Vibration Mating Force Capacitance and Attenuation
A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-3 E-Mail:
[email protected]
Micro-D Filter
Micro-D Filter Connectors Recommended Panel Cutouts
A
B
C
B
.062 (1.6) RADIUS 4 PLACES
A B
F
D
C
E FULL RADIUS TYP. 2 PLCS.
FULL RADIUS TYP. 2 PLCS.
Front Panel Mounting
D
E
A Layout
F
H
.010 (0.25) .010(0.25) MAX RADIUS 4 PLACES
A
G
9 15 21 25 31 37
In. ± .003 .565 .715 .865 .965 1.115 1.265
Rear Panel Mounting
B mm. ± 0.08 14.35 18.16 21.97 24.51 28.32 32.13
In. ± .002 .410 .560 .710 .810 .960 1.110
mm. ± 0.05 10.41 14.22 18.03 20.57 24.38 28.19
Metal Shell Mwdm Connectors C D In. mm. In. mm. ± .002 ± 0.05 ± .002 ± 0.05 .091 2.31 .290 7.37 .091 2.31 .290 7.37 .091 2.31 .290 7.37 .091 2.31 .290 7.37 .091 2.31 .290 7.37 .091 2.31 .290 7.37
E In. ± .005 .256 .256 .256 .256 .256 .256
F mm. ± 0.13 6.50 6.50 6.50 6.50 6.50 6.50
In. ± .002 .126 .126 .126 .126 .126 .126
mm. ± 0.05 3.20 3.20 3.20 3.20 3.20 3.20
Note: For front panel mounting, filtered connectors require a larger cut-out than standard MIL-DTL-83513 connectors.
J
K
L
M
N
P
INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-4 E-Mail:
[email protected]
Micro-D Filter
MIL-STD-681 Color Code Chart
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
© 2013 Glenair, Inc.
Base Color BLK BRN RED ORN YEL GRN BLU VIO GRY WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT
Mil-Std-681 Color Code Chart For Micro-D Connectors Second First Stripe PIN NO. MIL-STD-681 NO. Base Color Stripe 51 957 WHT 52 958 WHT 53 967 WHT 54 968 WHT 55 978 WHT 56 9012 WHT 57 9013 WHT 58 9014 WHT 59 9015 WHT 60 9016 WHT BLK 61 9017 WHT BRN 62 9018 WHT RED 63 9023 WHT ORN 64 9024 WHT YEL 65 9025 WHT GRN 66 9026 WHT BLU 67 9027 WHT VIO 68 9028 WHT GRY 69 9034 WHT BLK BRN 70 9035 WHT BLK RED 71 9036 WHT BLK ORN 72 9037 WHT BLK YEL 73 9038 WHT BLK GRN 74 9045 WHT BLK BLU 75 9046 WHT BLK VIO 76 9047 WHT BLK GRY 77 9048 WHT BRN RED 78 9056 WHT BRN ORN 79 9057 WHT BRN YEL 80 9058 WHT BRN GRN 81 9067 WHT BRN BLU 82 9068 WHT BRN VIO 83 9078 WHT BRN GRY 84 9123 WHT RED ORN 85 9124 WHT RED YEL 86 9125 WHT RED GRN 87 9126 WHT RED BLU 88 9127 WHT RED VIO 89 9128 WHT RED GRY 90 9134 WHT ORN YEL 91 9135 WHT ORN GRN 92 9136 WHT ORN BLU 93 9137 WHT ORN VIO 94 9138 WHT ORN GRY 95 9145 WHT YEL GRN 96 9146 WHT YEL BLU 97 9147 WHT YEL VIO 98 9148 WHT YEL GRY 99 9156 WHT GRN BLU 100 9157 WHT
High Performance Micro-D Connectors and Cables
First Stripe GRN GRN BLU BLU VIO BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN
U.S. CAGE Code 06324
Second Stripe VIO GRY VIO GRY GRY BRN BRN BRN BRN BRN BRN BRN RED RED RED RED RED RED ORN ORN ORN ORN ORN YEL YEL YEL YEL GRN GRN GRN BLU BLU VIO RED RED RED RED RED RED ORN ORN ORN ORN ORN YEL YEL YEL YEL GRN GRN
Third Stripe
A B
RED ORN YEL GRN BLU VIO GRY ORN YEL GRN BLU VIO GRY YEL GRN BLU VIO GRY GRN BLU VIO GRY BLU VIO GRY VIO GRY GRY ORN YEL GRN BLU VIO GRY YEL GRN BLU VIO GRY GRN BLU VIO GRY BLU VIO
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-5 E-Mail:
[email protected]
C D E F G H J K L M N P Q INDEX
PIN NO.
MIL-STD-681 NUMBER 0 1 2 3 4 5 6 7 8 9 90 91 92 93 94 95 96 97 98 901 902 903 904 905 906 907 908 912 913 914 915 916 917 918 923 924 925 926 927 928 934 935 936 937 938 945 946 947 948 956
Micro-D Filter
Micro-D Filter Connectors Special Products
A
filter connectors for space flight
B
Cadmium and silver plating are prohibited in space.
Connector Material and Finish Options for Space Applications
C
Specify electroless nickel or gold for connector finish
D
Outgassing
E
Standard filter connectors require thermal vacuum bakeout to meet outgassing requirements
F G
NASA screened filter connectors meet outgassing requirements
H
J
K
L
Some flight equipment requires low-outgassing components in order to prevent degradation to optics and other sensitive instruments. The space industry has adopted a standardized test procedure, ASTM E595, to evaluate outgassing properties. In order to be considered outgassing compatible, a material must exhibit a total mass loss (TML) of less than 1.0% and a collected volatile condensable material (CVCM) of less than 0.1%. Some of the materials used in filter connectors, like fluorosilicone interfacial seals, must go through special processing to meet TML and CVCM requirements. Per EEE-INST-002, filter connectors subjected to +125° C as part of voltage conditioning do not require additional processing to meet the outgassing requirements. If processing is required, Glenair offers a 24 hour thermal vacuum outgassing at 125° C for filter connectors. NASA Screening
NASA recommends that connectors for space flight be specially screened. EEE-INST-002 “Mission critical” connectors for space flight contains three levels of screening: Level 1 for highest reliability with the lowest level of risk, Level 2 for high reliability with low to moderate risk, and Level 3 for standard reliability. should undergo rigorous 100% final inspection. NASA Screening Levels and Modification Codes
Modification codes are available to invoke special screening.
M
Nasa Screening Level
Screening & X-Ray Inspection
Screening
Level 1: Highest Reliability
Mod 429B
Mod 429R
Level 2: High Reliability
Mod 429
Mod 429S
Level 3: Standard Reliability
Mod 429L
Mod 429T
X-Ray Inspection
N
To reduce risk even further for mission critical applications, x-ray inspection on a real-time x-ray system is available. Samples subject to x-ray inspection per Mod code 844 will be screened for foreign object debris (FOD) and if applicable, broken strands. A minimum of two views for each sample will be stored and are available upon request. Add the MOD codes listed in the table below to the end of a part number to invoke special test or processing requirements.
P
Q
INDEX
Some types of metals are prohibited for space flight. “Cadmium, zinc, chemically coated cadmium or zinc, or silver shall not be used as a connector or contact finish” (NASA EEEINST-002: Instructions for EEE Parts Selection, Screening, Qualification, and Derating). NASA recommends electroless nickel or gold plating on connector shells and gold plating for contacts.
Thermal Vacuum Outgassing
Mod 186M
X-Ray Inspection
Mod 844
Real-Time X-Ray Machine
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-6 E-Mail:
[email protected]
Micro-D Filter
240-030 Micro-D Filter Connectors Solder Cup
Glenair Filtered Solder Cup Micro-D'sprovide EMI solutions in a miniaturized M83513 type connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru #30 AWG wire, or specify oversize contacts for #24 gage wire. Choose Pi or C Filter Arraysin eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors. Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film.
How To Order Filter Micro-D Connectors with Solder Cups Sample Part Number
240-030
Series
240-030
Shell Finish
Aluminum Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Contact Layout
9, 15, 21, 25, 31, 37 (See Table III)
Contact Type
Solder Cup Contacts for #24 AWG or Smaller Wire P - Pin S - Socket
Filter Type
C - C Filter P - Pi Filter (See Table II)
Filter Class
A, B, C, D, E, F, G, J (See Table II)
Hardware
B, P, M, M1, S, S1, L, K, H (See Table I)
2 - Nickel 5 - Gold
-2
-25
p
p
b
b
Stainless Steel Shell 3 - Passivated
Thru-Hole Order Hardware Separately
P
M
Jackpost Removable Includes Nut and Washer
Jackscrew Hex Head Removable E-ring
M1
Jackscrew Hex Head Removable E-ring Extended
B C D E F G H J
Table I: Micro-D Mounting Hardware B
A
S
Jackscrew Slot Head Removable E-ring
S1
L
Jackscrew Slot Head Removable E-ring Extended
Jackscrew Hex Head NonRemovable
K
Jackscrew Slot Head NonRemovable Extended
H
Threaded Insert
K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-7 E-Mail:
[email protected]
Micro-D Filter
240-030 Micro-D Filter Connectors
A
Solder Cup
Table II: Micro-D Filter Classes and Performance
B
Filter Class
A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
C
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
400-650 800-1300
200-300 400-600
35–60 70–120
C
E
D .287 (7.3) MAX.
.096/.088 (2.43/2.23) DIA. PI FILTER .800 (20.32) MAX PI FILTER .600 .800 (15.24) (20.32) MAX MAX. C FILTER C FILTER .500 (12.70) MAX.
G
F
.093 ± .005 (2.36 ± 0.13)
J
K
H A Max Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S
In.
mm.
B
In .
.785
19.94
± .003 .565
.785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485
19.94 23.75 23.75 27.56 27.56 30.10 30.10 33.91 33.91 37.72 37.72
.565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265
C Max. mm. ± 0.08 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13
D Max.
E Max.
In.
mm.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35
.322 .322 .322 .322 .322 .322 .322 .322 .322 .322 .322 .322
8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18
F
In.
± .003 .183
.195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
H Max. mm. ± 0.08 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
In.
mm.
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94
INDEX
Q
1650-2500 3300-5000
.125 (3.18) MAX.
H
P
J
B
F
N
G
A
E
M
F
Table III: Dimensions
D
L
E
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-8 E-Mail:
[email protected]
Micro-D Filter
240-031 PCB Micro-D Filter Connectors Vertical Mount
Vertical Mount Printed Circuit Board Micro-D Filter Connectors. These vertical mount PCB connectors are ideal for flexible circuit or motherboard applications. Key Features includegold plated TwistPin contacts, machined aluminum shells, and either Pi or C filter elements. These environmentally sealed connectors are designed to meet the requirements of MIL-DTL-83513. Integral Board Standoffs and Pre-Tinned Tails—These connectors are solder dipped (63/37 SnPb) and feature a full complement of mounting hardware options.
240-031
-2
-25
Series
240-031
Shell Finish
Aluminum Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Contact Layout
9, 15, 21, 25, 31, 37 (See Table II)
Contact Type
P - Pin S - Socket
Filter Type
C - C Filter P - Pi Filter (See Table I)
Filter Class
A, B, C, D, E, F, G, J (See Table I)
PC Tail Length
1 - .110 Inches (2.79) 2 - .250 Inches (6.35) Length in Inches ± .015 (0.38)
Hardware Option
PCB Hardware Options NN - No Jackpost, No Threaded Insert PN - Extended Jackpost for .062” (1.6) PCB, No Threaded Insert RN - Extended Jackpost for .196” (5.0) PCB, No Threaded Insert NU - Threaded Insert Only, No Jackposts PU - Short Jackpost and Threaded Insert
2 - Nickel 5 - Gold
p
c
d
1
pN
Stainless Steel Shell 3 - Passivated
A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
C D F G H J
Jackscrew Options M - Hex Head Jackscrews S - Slot Head Jackscrews
Rear Panel Jackposts with Threaded Inserts R6U - 0.125” (3.2) Panel R5U - 0.094” (2.4) Panel R4U - 0.062” (1.6) Panel R3U - 0.047” (1.2) Panel R2U - 0.031” (0.8) Panel
K L M
Table I: Micro-D Filter Classes and Performance Filter Class
B
E
How To Order Micro-D Filter Vertical Mount PCB Connectors Sample Part Number
A
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-9 E-Mail:
[email protected]
Micro-D Filter
240-031 PCB Micro-D Filter Connectors Vertical Mount
A
Table II: Dimensions
B
A B C
C
E
D
Ø.018 ± .002 (0.46 ± 0.05)
D .096/.088 (2.43/2.23) DIA.
E
F
PI FILTER .930 (23.62) MAX. C FILTER .530 (13.46) MAX. F
G
H
.025 (0.64)
J
K
L
M
N
P
A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
In.
B mm.
In . ± .003
C Max. mm. ± 0.08
In.
D Max.
E Max.
F
mm.
In.
mm.
In.
mm.
In. ± .004
mm. ± 0.10
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.785
19.94
.565
14.35
.333
8.46
.785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485
19.94 23.75 23.75 27.56 27.56 30.10 30.10 33.91 33.91 37.72 37.72
.565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265
14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13
.400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101
10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96
INDEX
Q
TAIL LENGTH ± .015 (± 0.38)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-10 E-Mail:
[email protected]
Micro-D Filter
240-031 Vertical Mount PCB Micro-D Filter Connectors Hardware Options
A
Micro-D Filter Vertical PCB Hardware Options
9-51 CONTACTS NO. 2-56 UNC-2B 100 CONTACTS NO. 4-40 UNC-2B
A DIAMETER 9-51 CONTACTS .096/.088 (2.44/2.24) 100 CONTACTS .150/.145 (3.81/3.68)
B C D
A
NN Style
E
NU Style
Connector Supplied Without Hardware Thru-Hole, No Hardware
Connector Supplied With Threaded Inserts
F G H
.160 (4.1) MIN. (9-51 PINS) .225 (5.7) MIN. (100 PIN)
J
.160 (4.1) MIN. (9-51 PINS) .225 (5.7) MIN. (100 PIN)
PU Style
RU Style
Jackpost with Threaded Insert
Rear Panel Jackpost with Threaded Insert
K L M N
PC BOARD
P
PN Style
for .062" PCB
RN Style
for .196" PCB © 2013 Glenair, Inc.
M Style
Hex Head Jackscrew with E-Ring
High Performance Micro-D Connectors and Cables
S Style
Slot Head Jackscrew with E-Ring
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-11 E-Mail:
[email protected]
INDEX
Q
Extended Jackpost
Micro-D Filter
240-031 Vertical Mount PCB Micro-D Filter Connectors PCB Layouts
Micro-D Filter Vertical PCB Layouts — Pin Connector Shown
A
PC Tail Diameter .018 ± .002 (0.46 ± 0.05) Contact numbers shown are for pin connectors.
B
C
D
.050 (1.27) TYP .025 (0.64) TYP
E
1
.050 (1.27) TYP .025 (0.64) TYP
5
6
1
9
.050 (1.27) TYP .565 (14.35)
F
9
.096 (2.44) DIA TYP
8
.050 (1.27) TYP .715 (18.16)
9 CONTACTS
G
15
.096 (2.44) DIA TYP
15 CONTACTS
H
J
.050 (1.27) TYP .025 (0.64) TYP 1 12
K
.050 (1.27) TYP .025 (0.64) TYP
11
.050 (1.27) TYP .865 (21.97)
L
1
21
14
.096 (2.44) DIA TYP
13 25
.050 (1.27) TYP
.096 (2.44) DIA TYP
.965 (24.51)
21 CONTACTS
25 CONTACTS
M
N
P
1 17
.050 (1.27) TYP .025 (0.64) TYP
16
1
31
.050 (1.27) TYP
.096 (2.44) DIA TYP
20
1.115 (28.32
INDEX
Q
.050 (1.27) TYP .025 (0.64) TYP
31 CONTACTS
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
19 37
.050 (1.27) TYP
.096 (2.44) DIA TYP 1.265 (32.13)
37 CONTACTS
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-12 E-Mail:
[email protected]
Micro-D Filter
240-031 Vertical Mount PCB Micro-D Filter Connectors PCB Layouts
Micro-D Filter Vertical PCB Layouts — Socket Connector Shown
A
PC Tail Diameter .018 ± .002 (0.46 ± 0.05) Contact numbers shown are for socket connectors.
B C D
.050 (1.27) TYP .025 (0.64) TYP
.050 (1.27) TYP .025 (0.64) TYP
1
5
.050 (1.27) TYP .565 (14.35)
15
.096 (2.44) DIA TYP
E
1
8
6
9
.050 (1.27) TYP .715 (18.16)
9 CONTACTS
9
.096 (2.44) DIA TYP
15 CONTACTS
F G H
.050 (1.27) TYP .025 (0.64) TYP 1
11 21
.050 (1.27) TYP .865 (21.97)
J
.050 (1.27) TYP .025 (0.64) TYP 13
12
25
.096 (2.44) DIA TYP
1
.050 (1.27) TYP
14
.096 (2.44) DIA TYP
.965 (24.51)
21 CONTACTS
K L
25 CONTACTS
M N .050 (1.27) TYP .025 (0.64) TYP
.050 (1.27) TYP
37
.096 (2.44) DIA TYP
1.115 (28.32
31 CONTACTS
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
P
1
19
17
20
.050 (1.27) TYP
.096 (2.44) DIA TYP 1.265 (32.13)
37 CONTACTS
U.S. CAGE Code 06324
Q INDEX
1
16 31
.050 (1.27) TYP .025 (0.64) TYP
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-13 E-Mail:
[email protected]
Micro-D Filter
240-032 Pre-Wired Micro-D Filter Connectors Insulated Wire
Glenair Filtered Pigtail Micro-D's provide EMI solutions in a miniaturized M83513 Micro-D connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Insulated wire is factory precision-crimped to TwistPin contacts for superior reliability in the most demanding environments.
A
B
Choose Pi or C Filter Arrays in eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors.
C
D
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film.
E
How To Order Filter Micro-D Connectors with Insulated Wire Pigtails
F
H
J
K
L
M
N
Sample Part Number
G
240-032
-2
-25
p
p
b
6
k
Series
240-032
Shell Finish
Aluminum Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Contact Layout
9, 15, 21, 25, 31, 37 (See Table III)
Contact Type
Solder Cup Contacts for #24 AWG or Smaller Wire P - Pin S - Socket
Filter Type
C - C Filter P - Pi Filter (See Table II)
Filter Class
A, B, C, D, E, F, G , J (See Table I)
Wire Gage (AWG)
4 - #24 6 - #26
Wire Type
K - M22759/11 600 Vrms Teflon® (TFE) J - M22759/33 600 Vrms Modified Cross-Linked Tefzel® (ETFE)
Wire Color
1 - White 2 - Yellow 5 - Color-Coded Stripes Per MIL-STD-681(#24 and #26 gage only) 7 - Ten Color Repeat
Wire Length Inches
18 wire Length In Inches. “18” Specifies 18 Inches.
Hardware
B, P, M, M1, S, S1, L, K, H (See Table I)
2 - Nickel 5 - Gold
1
-18
b
Stainless Steel Shell 3 - Passivated
Table I: Micro-D Mounting Hardware B
P
M
M1
S
S1
L
K
H
Thru-Hole Order Hardware Separately
Jackpost Removable Includes Nut and Washer
Jackscrew Hex Head Removable E-ring
Jackscrew Hex Head Removable E-ring Extended
Jackscrew Slot Head Removable E-ring
Jackscrew Slot Head Removable E-ring Extended
Jackscrew Hex Head NonRemovable
Jackscrew Slot Head NonRemovable Extended
Threaded Insert
P
INDEX
Q
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-14 E-Mail:
[email protected]
Micro-D Filter
240-032 Pre-Wired Micro-D Filter Connectors Insulated Wire
A
Table II: Micro-D Filter Classes and Performance A
B
C
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
Table III: Dimensions
C
A
WIRE LENGTH +1.0/-0.0 (+25.4/-0.0)
B C
E
F
.096/.088 (2.43/2.23) DIA.
G
PI FILTER .950 1.000(24.13) (25.40)MAX. MAX C FILTER .700 .650 (17.78) (16.51) MAX MAX.
H
F
J
.093 ± .005 (2.36 ± 0.13)
K L
H A Max Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
B
C Max.
D Max.
E Max.
F
H Max.
In.
mm.
In . ± .003
mm. ± 0.08
In.
mm.
In.
mm.
In.
mm.
In. ± .004
mm. ± 0.10
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485
19.94 19.94 23.75 23.75 27.56 27.56 30.10 30.10 33.91 33.91 37.72 37.72
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35
.322 .322 .322 .322 .322 .322 .322 .322 .322 .322 .322 .322
8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18 8.18
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94
© 2013 Glenair, Inc.
D E
.310 (7.87) MAX.
D
B
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-15 E-Mail:
[email protected]
M N P Q INDEX
Filter Class
Micro-D Filter
240-033 Micro-D Pin-Socket In-Line Filter Adapters Avoid Costly Redesign with Micro-D Filter Adapters.Upgrade your existing cables and boxes to meet EMI requirements. These pin-socket adapters can be plugged into any standard M83513 connectors. Simply unplug your existing cable, install the filter adapter, and plug the cable into the adapter.
A
B
In-Line Filter Adaptersfeature gold plated TwistPin contacts, machined aluminum shells, and either Pi or C filter elements. These environmentally sealed adapters are designed to meet the requirements of MIL-DTL-83513.
C
D
How To Order Micro-D In-Line Filter Adapters
E
Sample Part Number
F
H
G
240-033
Series
240-033
Shell Finish
Aluminum Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film
Contact Layout
9, 15, 21, 25, 31, 37 (See Table II)
Contact Type
PS - Pin/Socket
Filter Type
C - C Filter P - Pi Filter (See Table I)
Filter Class
A, B, C,D, E, F, G, J (See Table I)
Hardware
N - No Hardware P - Combination Jackscrew and Jackpost
J
K
2 - Nickel 5 - Gold
-2
-21
ps
c
d
p
Stainless Steel Shell 3 - Passivated
Micro-D In-Line Filter Adapter Contact Arrangements 1
2
6
L
3
7
4
8
1
5
2
3
4
5
6
7
8
9 10 11 12 13 14 15
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9 10 11
1
1
2
3
4
5
3
4
5
6
7
8
9 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25
12 13 14 15 16 17 18 19 20 21
9 10 11 12 13 14 15 16
2
6
7
8
9 10 11 12 13 14 15 16 17 18 19
31
M
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Mating Face View of Pin Connector. Socket connectors have reversed cavity numbers.
N
Filter Class
A
B
P
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
Table I: Micro-D Filter Classes and Performance C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-16 E-Mail:
[email protected]
Micro-D Filter
240-033 Micro-D Pin-Socket In-Line Filter Adapters
A
Table II: Dimensions
B B
GLENAIR 06324
A
SOCKET
C
A Max.
9PS 15PS 21PS 25PS 31PS 37PS
mm.
.785 .935 1.085 1.185 1.335 1.485
19.94 23.75 27.56 30.10 33.91 37.72
B
C Max.
In.
mm.
± .003
± 0.08
.565 .715 .865 .965 1.115 1.265
14.35 18.16 21.97 24.51 28.32 32.13
D Max.
mm.
In.
mm.
In.
mm.
.400 .531 .701 .801 .951 1.101
10.16 14.00 17.81 20.35 24.16 27.96
.250 .250 .250 .250 .250 .250
6.35 6.35 6.35 6.35 6.35 6.35
.310 .310 .310 .310 .310 .310
7.87 7.87 7.87 7.87 7.87 7.87
F
G Max.
In.
mm.
± .004
± 0.10
.195 .195 .195 .195 .195 .195
4.95 4.95 4.95 4.95 4.95 4.95
H
F
K
#2-56 UNC THDS
H
E Max.
In.
D
J
E
G
E
In.
PIN
F
D
Layout
C
G
J Max.
In.
mm.
mm. ± .004 ± 0.10
1.400 1.400 1.400 1.400 1.400 1.400
35.56 35.56 35.56 35.56 35.56 35.56
.183 .183 .183 .183 .183 .183
In.
4.65 4.65 4.65 4.65 4.65 4.65
K Max.
In.
mm.
In.
mm.
.333 .483 .633 .733 .883 1.033
8.46 12.27 16.08 18.62 22.43 26.24
.184 .184 .184 .184 .184 .184
4.67 4.67 4.67 4.67 4.67 4.67
H J K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-17 E-Mail:
[email protected]
Micro-D Filter
240-034 PCB Micro-D Filter Connectors Right Angle
Right Angle Board Mount Filtered Micro-D's. These connectors feature low-pass EMI filtering in a right angle header for PCB termination.
A
B
Key Featuresinclude gold plated TwistPin contacts, machined aluminum shells, and either Pi or C filter elements. These environmentally sealed connectors are designed to meet the requirements of MIL-DTL-83513.
C
.100" x .100" Board Spacing- These connectors are similar to “CBR” style Micro-D's and share the same board footprint, allowing retrofit to existing boards.
D
E
How To Order Micro-D Filtered Right Angle PCB Connectors Sample Part Number
F
H
J
K
240-034
Series
Contact Layout Contact Type Filter Type Filter Class
Hardware
PC Tail Length
L
PN/PU
p
e
PU
-.080
R2U Thru R6U Panel
HEX NUT EPOXY FILL
Thru-Hole: For use with Glenair jackposts only. Order Standard Jackpost: Factory Jackpost for Rear Panel Mounting: Shipped loosely hardware separately. Install w/ threadlocking compound. installed, not intended for removal. installed. Install w/ permanent threadlocking compound.
Q
Filter Class
A
B
INDEX
P
s
Micro-D Jackpost options NN/NU
M
N
-37
240-034 Aluminum Shell Stainless Steel Shell 1 - Cadmium 2 - Nickel 3 - Passivated 4 - Black Anodize 5 - Gold 6 - Chem Film 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter (See Table I) A, B, C,D, E, F, G, J (See Table I) PCB Hardware Options Rear Panel Jackposts with Threaded Inserts NN - No Jackpost, No Threaded Insert R6U - 0.125” (3.2) Panel PN - Jackpost, No Threaded Insert R5U - 0.094” (2.4) Panel NU - Threaded Insert Only, No Jackposts R4U - 0.062” (1.6) Panel PU - Jackpost and Threaded Insert R3U - 0.047” (1.2) Panel R2U - 0.031” (0.8) Panel .080 .110 .125 .150 .190 .250 Length in Inches ± .015(0.38)
Shell Finish
G
-2
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
Table I: Micro-D Filter Classes and Performance
© 2013 Glenair, Inc.
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
High Performance Micro-D Connectors and Cables
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-18 E-Mail:
[email protected]
Micro-D Filter
240-034 PCB Micro-D Filter Connectors Right Angle
Table II: Dimensions
A B
A B C
C
D
TAIL TailLENGTH length± .015 ±.015(0.38) (0.38) #2-56 UNC-2B THREADS
E PI FILTER FILTER1.205 1.140(30.61) (28.96)MAX MAX. C FILTER FILTER.865 .840(21.97) (21.34) MAX. MAX
PI FILTER 1.300 (33.02) MAX C FILTER .960 (24.38) MAX
F
F
H
G
H
CONFIGURATION FOR 9-25 CONTACTS
CONFIGURATION FOR 31-37 CONTACTS
J
J
K
2X MOUNTING HOLES.096 DIA. ± .003 (2.44 ± 0.08) OR OPTIONAL 2-26 UNC 2B THREADED INSERTS
C Filter A Max.
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
B
C Max.
In.
mm.
In. mm. ±.003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485
19.94 19.94 23.75 23.75 27.56 27.56 30.10 30.10 33.91 33.91 37.72 37.72
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265
© 2013 Glenair, Inc.
In.
D Max.
E Max.
mm.
In.
mm.
In.
mm.
14.35 .333 8.46 14.35 .400 10.16 18.16 .483 12.27 18.16 .551 14.00 21.97 .633 16.08 21.97 .701 17.81 24.51 .733 18.62 24.51 .801 20.35 28.32 .883 22.43 28.32 .951 24.16 32.13 1.033 26.24 32.13 1.101 27.96
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87
F
K Max.
In. mm. ±.004 ± 0.10 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
High Performance Micro-D Connectors and Cables
H J
K
K
Layout
D
In.
mm.
.335 .335 .335 .335 .335 .335 .335 .335 .430 .430 .430 .430
8.51 8.51 8.51 8.51 8.51 8.51 8.51 8.51 10.92 10.92 10.92 10.92
H
L
Pi Filter J
H
J
In. mm. In. mm. In. mm. In. mm. ±.010 ±0.25 ±.010 ±0.25 ±.010 ±0.25 ±.010 ±0.25 .440 .440 .340 .340 .340 .340 .340 .340 .340 .340 .340 .340
11.18 11.18 8.64 8.64 8.64 8.64 8.64 8.64 8.64 8.64 8.64 8.64
.460 .460 .460 .460 .460 .460 .460 .460 .460 .460 .460 .460
11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68
U.S. CAGE Code 06324
.740 .740 .640 .640 .640 .640 .640 .640 .640 .640 .640 .640
18.80 18.80 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.26
.760 .760 .760 .760 .760 .760 .760 .760 .760 .760 .760 .760
19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-19 E-Mail:
[email protected]
M N P Q INDEX
E
Micro-D Filter
240-034 PCB Micro-D Filter Connectors Right Angle
Micro-D Filter Right Angle PCB Layouts — Pin Connector
A
PC Tail Diameter .018 ± .002 (0.46 ± 0.05) Contact numbers shown are for pin connectors. Patterns shown are for connector mounting side of PC board.
B
C
D
CONNECTOR CONNECTOR FLANGE FLANGE CONNECTOR FLANGE C CLL CL .100 (2.54)TYP .100 (2.54)TYP
.020 .020 (0.51) (0.51) .083 .020 (0.51) .083 (2.11) (2.11) .083 (2.11)
E
.100 .100 (2.54) (2.54) .100 (2.54)
66 6
F
H
J
K
22 44 55 2 4 5 77 33 88 99 7 .050 3 (1.27)TYP 8 9 .050 (1.27)TYP
G .100 .100 (2.54) (2.54) .083.100 (2.11) (2.54) .083 (2.11) .083 (2.11)
.100 .100 (2.54) (2.54) .100 (2.54)
12 12 12
22 2
11 1
14 14 14
33 3
44 4
55 5
17 17 17
77 7
.050 (1.27)TYP .865 .865 (21.97) (21.97) .865 (21.97)
88 8 19 19 19
99 9
10 10 10 20 20 20
11 11 11
21 21 21
.100 .100 (2.54) (2.54) .100 (2.54)
11 1
22 2 17 17 17
33 3
44 4 19 19 19
55 5
66 6 21 21 21
77 7
88 8 23 23 23
24 24 24
18 20 22 18 .050 20 (1.27)TYP 22 18 .050 20 (1.27)TYP 22
99 9 25 25 25
10 10 10 26 26 26
1.115 .050 (1.27)TYP 1.115 (28.32) (28.32) 1.115 (28.32)
11 11 11 27 27 27
12 12 12 28 28 28
.020 .020 (0.51) (0.51) .020 (0.51)
88 8
.020 (0.51) (0.51) .020 .020 (0.51)
15 15 15
.050 (1.27)TYP .715 .715 (18.16) (18.16) .715 (18.16)
13 13 13 29 29 29
CONNECTOR CONNECTOR FLANGE FLANGE CONNECTOR FLANGE
CL C L CL
11 1
.100 .100 (2.54) (2.54) .100 (2.54)
14 14 14 31 31 31
15 15 15 30 30 30
16 16 16
.100 (2.54) (2.54) .100 .100 (2.54) .158 .158 (4.01) (4.01) .158 .183 (4.01) (4.65) .100 .100 (2.54) (2.54) .020 (0.51) (0.51) .100 (2.54) .020 .020 (0.51)
31 CONTACTS
© 2013 Glenair, Inc.
66 6
77 7
22 2 14 14 14
15 15 15
33 3
17 17 17
44 4
66 6
55 5
77 7
88 8
16 18 18 19 19 20 20 16 16 18 19 20 .050 (1.27)TYP
99 9
10 10 10 21 21 21
22 22 22
.050 (1.27)TYP .965 .050 (1.27)TYP .965 (24.51) (24.51) .965 (24.51)
11 11 11 23 23 23
24 24 24
12 12 12 25 25 25
13 13 13
.020 .020 (0.51) (0.51) .020 (0.51)
25 CONTACTS
CONNECTOR CONNECTOR FLANGE FLANGE CONNECTOR FLANGE
CL C L CL
12 12 12
55 5
10 11 11 13 13 14 14 10 .050 (1.27)TYP 10 .050 11 (1.27)TYP 13 14
.083 (2.11)
66 6
13 15 15 16 16 18 18 13 .050 (1.27)TYP 13 .050 15 (1.27)TYP 16 18
.158 .158 (4.01) (4.01) .158 (4.01)
33 3
44 4
.100 .100 (2.54) (2.54) .083 (2.11) (2.54) .083.100 (2.11)
21 CONTACTS
.100 .100 (2.54) (2.54) .100 (2.54)
11 1
22 2
15 CONTACTS
CONNECTOR CONNECTOR FLANGE FLANGE CONNECTOR FLANGE
C CLL CL
INDEX
Q
99 9
.565 (14.35) .050 (1.27)TYP .565 (14.35) .565 (14.35)
M
P
.100 .100 (2.54) (2.54) .100 (2.54)
9 CONTACTS
L
N
.100 .100 (2.54) (2.54) .108 (2.74) (2.74) .100 (2.54) .108 .108 (2.74)
.100 (2.54)TYP
11 1
CONNECTOR CONNECTOR FLANGE FLANGE CONNECTOR C CLL FLANGE CL
High Performance Micro-D Connectors and Cables
CONNECTOR CONNECTOR FLANGE FLANGE CONNECTOR FLANGE
CL C L CL 11 1 20 20 20
22 2 21 21 21
33 3 22 22 22
44 4
55 5 24 24 24
66 6
77 7 26 26 26
88 8
99 9 28 28 28
23 25 23 25 27 27 .050 (1.27)TYP (1.27)TYP .050 23 25 27
10 10 10
11 11 11 29 29 29
12 12 12 30 30 30
1.265 .050 (1.27)TYP 1.265 (32.13) (32.13) 1.265 (32.13)
13 13 13 31 31 31
14 14 14 32 32 32
15 15 15 33 33 33
16 16 16 34 34 34
17 17 17 35 35 35
18 18 18 36 36 36
19 19 19 37 37 37
.020 (0.51) (0.51) .020 .020 (0.51)
37 CONTACTS
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-20 E-Mail:
[email protected]
Micro-D Filter
240-034 PCB Micro-D Filter Connectors Right Angle
Micro-D Filter Right Angle PCB Layouts — Socket Connector
A
PC Tail Diameter .018 ± .002 (0.46 ± 0.05) Contact numbers shown are for socket connectors. Patterns shown are for connector mounting side of PC board.
B
CONNECTOR FLANGE .020 (0.51) .083 (2.11) 5
4
9
8
2
7 8
.100 (2.54)
1
3
7
15
6
14
.050 (1.27)TYP
11
.100 (2.54) 21
9 20
5
7
3
17
19
18
12
2
4
14
16
13
.100 (2.54)
1 13
15
.050 (1.27)TYP
10
E
.020 (0.51)
9
F
12
.020 (0.51)
11 24
25
10 22
23
8
6
9 21
7 20
G H
CONNECTOR FLANGE
CL
.083 (2.11)
6
11
1
.050 (1.27)TYP
.100 (2.54)
CL 8
13
2 3
15 CONTACTS
CONNECTOR FLANGE
10
4 12
.715 (18.16)
9 CONTACTS
.083 (2.11)
5 6
.565 (14.35)
.100 (2.54)
D
.108 (2.74)
.100 (2.54)TYP
.100 (2.54)
CL
.100 (2.54)
CL
C
CONNECTOR FLANGE
4 5
19
3 17
18
J
2 15
16
1
.020 (0.51)
14
.050 (1.27)TYP .965 (24.51)
.865 (21.97)
21 CONTACTS
K L
25 CONTACTS
M .158 (4.01) 15
.100 (2.54)
16
13 14
30
11 12
29 31
28
10
8 24
25 26
6 7
23
4 5
21 22
.050 (1.27)TYP 1.115 (28.32)
2 3
19 20
(4.65)
1 17
.020 (0.51)
19
18
High Performance Micro-D Connectors and Cables
17 18
.100 (2.54)
31 CONTACTS
© 2013 Glenair, Inc.
CONNECTOR FLANGE
CL
.100 (2.54)
N
.158 .183 (4.01) 9
27
CONNECTOR FLANGE
CL
37
15 16
35 36
13 14
33 34
11 12
31 32
10 29
30
9
7 8
28
5 6
26 27
.050 (1.27)TYP 1.265 (32.13)
3 4
24 25
1 2
22 23
20
.020 (0.51)
Q
21
37 CONTACTS
U.S. CAGE Code 06324
P INDEX
.100 (2.54)
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-21 E-Mail:
[email protected]
Micro-D Filter
240-075 Rear Panel Mount Micro-D Filter Connectors Solder Cup
Glenair Rear Panel Mount Solder Cup Filter Micro-D'sprovide EMI solutions in a miniaturized M83513 type connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru #30 AWG wire, or specify oversize contacts for #24 gage wire.
A
B
C
Choose Pi or C Filter Arraysin eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors.
D
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film.
E How To Order Rear Panel Mount Micro-D Filter connectors with Solder Cups
F
H
J
K
Sample Part Number
240-075
Series
G
240-075 Aluminum Shell 1 - Cadmium 2 - Nickel 5 - Gold 6 - Chem Film 33 - Nickel/PTFE 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter A, B, C, D, E, F, G, J (See Table I) Rear Panel Mount Hardware Option R1 - 0.032” (.08) Panel R2 - 0.047” (.12) Panel R4 - 0.093” (.12) Panel R5 - 0.125” (.32) Panel
Shell Finish Contact Layout Contact Type Filter Type Filter Class Hardware Option See Note 1 Plug EMI Ground Spring See Note 2 O-Ring
N
-25
s
c
f
-r1
-n
n
R3 - 0.062” (.16) Panel R6 - 0.080” (.20) Panel
G - Ground spring installed N - No ground spring (N applies to all receptacle assemblies) C - Conductive N - Non-Conductive (Nitrile)
L
M
-2
Table I: Micro-D Filter Classes and Performance Filter Class
A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
P
INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-22 E-Mail:
[email protected]
Micro-D Filter
240-075 Rear Panel Mount Micro-D Filter Connectors Solder Cup
A
Table II: Dimensions G
B
.800 MAX PI FILTER .600 MAX C FILTER
F
PIN 1
C
.125 MAX
D
C MAX
A
E
SKT 1
B
E MAX D
F
H
G 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
Notes
A ±.005 in. mm 0.960 0.960 0.960 0.960 1.110 1.110 1.110 1.110 1.260 1.260 1.260 1.260 1.360 1.360 1.360 1.360 1.510 1.510 1.510 1.510 1.660 1.660 1.660 1.660
B ±.003 in. mm 0.565 14.35 0.565 14.35 0.715 18.16 0.715 18.16 0.865 21.97 0.865 21.97 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13
C Max in. mm 0.334 8.48 0.400 10.16 0.484 12.29 0.550 13.97 0.634 16.10 0.700 17.78 0.734 18.64 0.800 20.32 0.884 22.45 0.950 24.13 1.034 26.26 1.100 27.94
D ±.005 in. mm 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19
1. Mounting holes fitted with 2x .086-56 threaded insert, .15 min thread. (T3585-02CPF129). 2. Ground spring not available on cadmium plated assemblies. 3. Interface dimensions per MIL-DTL-83513. 4. Electrical performance: I.R.: 5000 Megohms min at 100 VDC D.W.V.: 200 VDC 5. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification.
E Max in. mm 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35
F±.003 in. mm 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95
G±.005 in. mm .790 20.07 .790 20.07 .940 23.88 .940 23.88 1.090 27.69 1.090 27.69 1.190 30.23 1.190 30.23 1.340 34.04 1.340 34.04 1.490 37.85 1.490 37.85
H Max in. mm 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87
K L M P
Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone
© 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables, Rev 6.13.17
J
N
Materials / Finishes • • • • •
H
Q INDEX
Shell Size
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-23 E-Mail:
[email protected]
Micro-D Filter
240-076 Rear Panel Mount PCB Micro-D Filter Connectors Vertical Mount Style
Glenair Rear Panel Mount Micro-D, PCB Filter Connector These vertical mount PCB connectors are ideal for flexible circuit or motherboard applications.
A
B
Key Features includegold plated TwistPin contacts, machined aluminum shells, and either Pi or C filter elements. These environmentally sealed connectors are designed to meet the requirements of MIL-DTL-83513.
C
D
25S Receptacle Assembly
E
How To Order Rear Panel Mount Micro-D Filtered Vertical Mount PCB Sample Part Number
F
H
J
K
L
M
N
Integral Board Standoffs and Pre-Tinned Tails These connectors are solder dipped (63/37 SnPb) and feature a full complement of mounting hardware options.
240-076
Series
G
240-076 Aluminum Shell 1 - Cadmium 2 - Nickel 5 - Gold 6 - Chem Film 33 - Nickel/PTFE 9, 15, 21, 25, 31, 37 (See Table II) P - Plug/Pin S - Receptacle/Socket C - C Filter P - Pi Filter A, B, C, D, E, F, G, J (See Table I) Rear Panel Mount Hardware Option R1 - 0.032” (.08) Panel R2 - 0.047” (.12) Panel R4 - 0.093” (.12) Panel R5 - 0.125” (.32) Panel .080, .110, .125, .140, .150, .190, .250 G - Ground Spring Installed N - No Ground Spring (N applies to all receptacle assemblies) C - Conductive N - Non-Conductive (Nitrile)
Shell Finish Contact Layout Contact Type Filter Type Filter Class Hardware Option See Note 1 Lead Length Plug EMI Ground Spring See Note 2 O-Ring
-2
-25
s
c
f
r1
.110
n
n
R3 - 0.062” (.16) Panel R6 - 0.080” (.20) Panel
Table I: Micro-D Filter Classes and Performance Filter Class
A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
P
INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-24 E-Mail:
[email protected]
Micro-D Filter
240-076 PCB Rear Panel Mount Micro-D Filter Connectors Vertical Mount Style
A
Table II: Dimensions
B
G (J) .210 (5.33) Ref
C
.930 Max Pi Filter .730 Max C Filter
F
D
C Max
25 Awg (Ø.018) Solder Dipped Pin 1
A
Skt 1
B
Tail Length ±.015
B
2x .086-56 Threaded Insert (See Note 1)
E Max
H
D
E F G
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
Notes
A ±.005 in. mm 0.960 24.38 0.960 24.38 1.110 28.19 1.110 28.19 1.260 32.00 1.260 32.00 1.360 34.54 1.360 34.54 1.510 38.35 1.510 38.35 1.660 42.16 1.660 42.16
B ±.003 in. mm 0.565 14.35 0.565 14.35 0.715 18.16 0.715 18.16 0.865 21.97 0.865 21.97 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13
C Max D ±.005 in. mm in. mm 0.334 364.52 0.480 12.19 0.400 364.52 0.480 12.19 0.484 461.29 0.480 12.19 0.550 461.29 0.480 12.19 0.634 558.06 0.480 12.19 0.700 558.06 0.480 12.19 0.734 622.58 0.480 12.19 0.800 622.58 0.480 12.19 0.884 719.35 0.480 12.19 0.950 719.35 0.480 12.19 1.034 816.13 0.480 12.19 1.100 816.13 0.480 12.19
1. Mounting holes fitted with 2x .086-56 threaded insert, .15 min thread. (T3585-02CPF129). 2. Ground spring not available on cadmium plated assemblies. 3. Interface dimensions per MIL-DTL-83513. 4. Electrical performance: I.R.: 5000 Megohms min at 100 VDC D.W.V.: 200 VDC 5. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification. 6. See 240-031 for PCB layout
E Max in. mm 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35
F±.003 in. mm 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95
G±.005 in. mm .790 20.07 .790 20.07 .940 23.88 .940 23.88 1.090 27.69 1.090 27.69 1.190 30.23 1.190 30.23 1.340 34.04 1.340 34.04 1.490 37.85 1.490 37.85
H Max in. mm 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87
Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone
© 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables Rev 6.13.17
J K L M N
Materials / Finishes • • • • •
H
P Q INDEX
Shell Size
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-25 E-Mail:
[email protected]
Micro-D Filter
240-077 Rear Panel Mount Micro-D Filter Connectors Insulated Wire
Glenair Filtered Insulated Wire Micro-D's provide EMI solutions in a miniaturized M83513 Micro-D connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Insulated wire is factory precisioncrimped to TwistPin contacts for superior reliability in the most demanding environments.
A
B
C
Choose Pi or C Filter Arrays in eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors.
D
E
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film.
ylbmessA elcatpeceR S52
F
H
J
K
L
M
N
P
Sample Part Number
240-077
Series
-2
-25
s
c
f
-6
k
7
-18 r1
N
N
240-077 Aluminum Shell 1 - Cadmium 2 - Nickel 5 - Gold 6 - Chem Film 33 - Nickel/PTFE 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter A, B, C,D, E, F, G, J (See Table I) 4 - 24 6 - 26 8 - 28 0 - 30 K - M22759/11 J - M22759/33 E - NEMA HP3-EB (M16878/4) 1 - White 2 - Yellow 5 - Full Color 7 - 10 Color Repeat 18 - 18 Inches Rear Panel Mount Hardware Option (See Note 1) B - No Hardware R1- 0.032” (.08) Panel R2 - 0.047” (.12) Panel R3 - 0.062” (.16) Panel R4 - 0.093” (.12) Panel R5 - 0.125” (.32) Panel R6 - 0.080” (.20) Panel G - Ground spring installed N - No ground spring (N applies to all receptacle assemblies) (See Note 2) C - Conductive N - Non-Conductive (Nitrile)
Shell Finish Contact Layout Contact Type Filter Type Filter Class Wire Gauge Wire Type Wire Color/Type Wire Length Hardware Option Plug EMI Ground Spring O-Ring
Table I: Micro-D Filter Classes and Performance Filter Class
A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
INDEX
Q
G
How To Order Rear Panel Mount Filter Connectors with Insulated Wire
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-26 E-Mail:
[email protected]
Micro-D Filter
240-077 Rear Panel Mount Micro-D Filter Connectors Insulated Wire
A
Table II: Dimensions
B
G Pi = .750 Max C = .500 Max
F
PIN 1
C D
C Max
A B
E
Wire Length
SKT 1
F
E MAX D
G
H
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
Notes
A ±.005 in. mm 0.960 24.38 0.960 24.38 1.110 28.19 1.110 28.19 1.260 32.00 1.260 32.00 1.360 34.54 1.360 34.54 1.510 38.35 1.510 38.35 1.660 42.16 1.660 42.16
B ±.003 in. mm 0.565 14.35 0.565 14.35 0.715 18.16 0.715 18.16 0.865 21.97 0.865 21.97 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13
C Max in. mm 0.334 8.48 0.400 10.16 0.484 12.29 0.550 13.97 0.634 16.10 0.700 17.78 0.734 18.64 0.800 20.32 0.884 22.45 0.950 24.13 1.034 26.26 1.100 27.94
D ±.005 in. mm 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.4 80 12.19 0.480 12.19
1. Mounting holes fitted with 2x .086-56 threaded insert, .15 min thread. (T3585-02CPF129). 2. Ground spring not available on cadmium plated assemblies. 3. Interface dimensions per MIL-DTL-83513. 4. Electrical performance: I.R.: 5000 Megohms min at 100 VDC D.W.V.: 200 VDC 5. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification.
E Max in. mm 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35
F±.003 in. mm 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95
G±.005 in. mm .790 20.07 .790 20.07 .940 23.88 .940 23.88 1.090 27.69 1.090 27.69 1.190 30.23 1.190 30.23 1.340 34.04 1.340 34.04 1.490 37.85 1.490 37.85
H Max in. mm 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87
K L M P
Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone
© 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables Rev 6.13.17
J
N
Materials / Finishes • • • • •
H
Q INDEX
Shell Size
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-27 E-Mail:
[email protected]
Micro-D Filter
240-078 Rear Panel Mount Micro-D Filter Connectors Condensed Board Right Angle Type
Glenair Filtered Right Angle Micro-D's provide EMI solutions in a miniaturized M83513 Micro-D connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors.
A
B
Choose Pi or C Filter Arrays in eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors.
C
D
ylbmessA elcatpeceR S52
How To Order Micro-D Filtered Right Angle PCB Sample Part Number
E
J
240-078
Series
G
Contact Layout Contact Type Filter Type Filter Class Hardware Option Insert Lead Length Plug EMI Ground Spring O-Ring
K
L
M
N
P
-25
s
c
f
-r1
t
-.110
N
N
(See Note 2)
Specific Dimensions per Filter Type Shell Size 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
G MAX in. 0.865 0.865 0.865 0.865 0.865 0.865 0.865 0.865 0.960 0.960 0.960 0.960 1.090 1.090
mm. 21.97 21.97 21.97 21.97 21.97 21.97 21.97 21.97 24.38 24.38 24.38 24.38 27.69 27.69
C FILTER H ± .010 in. mm. 0.440 11.18 0.440 11.18 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.340 8.64 0.360 9.14 0.360 9.14
J ± .010 in. 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.510 0.510
mm. 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 12.95 12.95
G MAX in. 1.205 1.205 1.205 1.205 1.205 1.205 1.205 1.205 1.300 1.300 1.300 1.300 1.440 1.440
mm. 30.61 30.61 30.61 30.61 30.61 30.61 30.61 30.61 33.02 33.02 33.02 33.02 36.58 36.58
PI FILTER H ± .010 in. mm. 0.740 18.80 0.740 18.80 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.640 16.26 0.660 16.76 0.660 16.76
J ± .010 in. 0.760 0.760 0.760 0.760 0.760 0.760 0.760 0.760 0.760 0.760 0.760 0.760 0.810 0.810
mm. 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 20.57 20.57
INDEX
Q
-2
240-078 Aluminum Shell 1 - Cadmium 2 - Nickel 5 - Gold 6 - Chem Film 33 - Nickel/PTFE 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter A, B, C,D, E, F, G, J (See Table I) Rear Panel Mount Hardware Option (See Note 1) R1 - 0.032" (0.8) Panel R2 - 0.047" (1.2) Panel R3 - 0.062" (1.6) Panel R4 - 0.093" (2.4) Panel R5 - 0.125" (3.2) Panel R6 - 0.080" (2.0) Panel T - Threaded insert in board mount hole N - No threaded insert .080 .110 .125 .140 .150 .172 .190 .250 G - Ground spring installed N - No ground spring (N applies to all receptacle assemblies) C - Conductive N - Non-Conductive (Nitrile)
Shell Finish
F
H
.100” x .100” Board Spacing- These connectors are similar to “CBR” style Micro-D’s and share the same board footprint, allowing retrofit to existing boards.
Rev. Oct. 14 2015 © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-28 E-Mail:
[email protected]
Micro-D Filter
240-078 Rear Panel Mount Micro-D Filter Connectors Condensed Board Right Angle Type
Table II: Dimensional Table Dimensional Table
A
M B .094 (2.39) G
B
K H
F
J
C
C Max A
Pin 1
B
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
A MAX in. mm. 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.365 34.67 1.365 34.67 1.515 38.48 1.515 38.48 1.665 42.29 1.665 42.29 1.665 42.29 1.665 42.29
E
D Max
E
Shell Size
D
25 AWG (Ø.018) Solder Dipped Leads
Skt 1
L
B ± .003 in. mm. 0.565 14.35 0.565 14.35 0.715 18.16 0.715 18.16 0.865 21.97 0.865 21.97 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86
C MAX in. mm. 0.333 8.46 0.400 10.16 0.483 12.27 0.551 14.00 0.633 16.08 0.701 17.81 0.733 18.62 0.801 20.35 0.883 22.43 0.951 24.16 1.033 26.24 1.101 27.97 1.033 26.24 1.101 27.97
D MAX in. mm. 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.224 5.69 0.293 7.44
E MAX in. mm. 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.485 12.32 0.530 13.46 0.530 13.46
F ± .004 in. mm. 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95
K MAX in. mm. 0.335 8.51 0.335 8.51 0.335 8.51 0.335 8.51 0.335 8.51 0.335 8.51 0.335 8.51 0.335 8.51 0.430 10.92 0.430 10.92 0.430 10.92 0.430 10.92 0.560 14.22 0.560 14.22
L MAX in. mm. 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.394 10.01 0.394 10.01
M MAX in. mm. .790 20.07 .790 20.07 .940 23.88 .940 23.88 1.090 27.69 1.090 27.69 1.190 30.23 1.190 30.23 1.340 34.04 1.340 34.04 1.490 37.85 1.490 37.85 1.440 36.58 1.440 36.58
Table I: Micro-D Filter Classes and Performance A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
Notes
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
1. Mounting holes fitted with 2x .086-56 threaded insert, .15 min thread. (T3585-02CPF129). 2. Ground spring not available on cadmium plated assemblies. 3. Interface dimensions per MIL-DTL-83513. 4. Electrical performance: I.R.: 5000 Megohms min at 100 VDC D.W.V.: 200 VDC 5. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification. 6. See 240-034 for PCB layout
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
Materials / Finishes: • • • • •
H J K L M N P
Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone
© 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables Rev 6.13.17
G
Q INDEX
Filter Class
F
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-29 E-Mail:
[email protected]
Micro-D Filter
247-379 Edge Board Micro-D Filter Connector Glenair Edge Board Micro-D Filter Connectors provide EMI solutions in a miniaturized M83513 Micro-D connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors.
A
B
Choose Pi or C Filter Arrays in eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors.
C
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film.
D
E
How To Order Edge Board Micro-D Filter Connector Sample Part Number
F
H
J
K
L
M
N
247-379
Series
247-379 Aluminum Shell 1 - Cadmium 2 - Electroless Nickel 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter N - No Filter A, B, C, D, E, F, G, N, J (See Table I) NN - No Jackpost, No Threaded Insert PN - Jackpost, No Threaded Insert NU - Threaded Insert Only, No Jackpost (see Table III)
Shell Finish
G
Contact Layout Contact Type Filter Type Filter Class
Hardware Option (See Note 1)
-2
-21
p
c
a
pn
5 - Gold
Rear Panel Mount Jackpost: R2U - 0.031” (0.6) Panel R3U - 0.047” (1.2) Panel R4U - 0.062” (1.6) Panel R5U - 0.094 (2.4) Panel R6U - 0.125” (3.2) Panel
Jackscrew Option: M - Hex Head Jackscrews S - Slot Head Jackscrews (See Table IV)
Table I: Micro-D Filter Classes and Performance Filter Class
A
B
C Filter Pi Filter
19000-28000 38000-56000
16000-22500 32000-45000
Notes
C
D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000
1. PC tail configuration intended for use with .062 board thickness 2. Electrical Performance: • Insulation Resistance: 5000 megohms Min at 100 vdc • Dielectric Withstanding Voltage: 200 vdc
P
E
F
G
J
1650-2500 3300-5000
400-650 800-1300
200-300 400-600
35–60 70–120
Materials / Finishes • • • • •
Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone
INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-30 E-Mail:
[email protected]
Micro-D Filter
247-379 Edge Board Micro-D Filter Connector
A
Table II: Dimensions A C
.325 Max
B
Ø.096 .088
C
.292 Max
D
.070 Min.
H
See Note 1
.050 ±.010
.200 ±.020
E
.290 .260
F G
F
H
.093
Pi Filter .800 Max C Filter .600 Max
J
B
K
D
L 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S
© 2013 Glenair, Inc.
A ±.010 in. mm 0.785 19.94 0.785 19.94 0.935 23.75 0.935 23.75 1.085 27.56 1.085 27.56 1.185 30.10 1.185 30.10 1.335 33.91 1.335 33.91 1.485 37.72 1.485 37.72
B Max in. mm 0.333 8.46 0.400 10.16 0.483 12.27 0.551 14.00 0.633 16.08 0.701 17.81 0.733 18.62 0.801 20.35 0.883 22.43 0.951 24.16 1.033 26.24 1.101 27.97
C ±.003 in. mm 0.565 14.35 0.565 14.35 0.715 18.16 0.715 18.16 0.865 21.97 0.865 21.97 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13
High Performance Micro-D Connectors and Cables
D Max in. mm 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35
F ±.004 in. mm 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95
U.S. CAGE Code 06324
H Max in. mm 0.400 10.16 0.400 10.16 0.550 13.97 0.550 13.97 0.700 17.78 0.700 17.78 0.800 20.32 0.800 20.32 0.950 24.13 0.950 24.13 1.100 27.94 1.100 27.94
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-31 E-Mail:
[email protected]
M N P Q INDEX
Shell Size
Micro-D Filter
247-379 Edge Board Micro-D Filter Connector
A
Micro-D Filtered Edge Board Connector - Plug .600
B
.025 .050
.026 Typ. Pad Width
1 2 3 4 5 6 7 8 9 10 11 12 13
C
14 15 16 17 18 19 20 21 22 23 24 25
.080 Typ. Pad Height
D
Flex Side A 6 7 8 9
H
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Flex Side B
Flex Side A Size 31P Flex Side B
.700
Size 31P .900 .025 .050
.350
.025 .050
1 2 3 45 6 7 8
Flex Side A Size 15P
9 10 11 12 13 14 15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Flex Side A Size 37P Flex Side B
Flex Side B
M
.300
.850
Size 15P
N
Size 37P
.500 .025 .050 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Flex Side A Size 21P Flex Side B
INDEX
Q
Size 9P
Size 9P
L
P
1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16
.150
J
K
Size 25P
.025 .050
1 2 3 4 5
G
Flex Side B
.750
.200 .025 .050
F
Size 25P
.550
Pad Height and Width
E
Flex Side A
.450
Size 21P
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-32 E-Mail:
[email protected]
Micro-D Filter
247-379 Edge Board Micro-D Filter Connector
A
Micro-D Filtered Edge Board Connector - Socket .600
B
.025 .050 .026 Typ. Pad Width
13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14
.080 Typ. Pad Height
Flex Side A
C
Size 25S Flex Side B
D
.550
Pad Height and Width
Size 25S
E
.750
.200 .025 .050
.025 .050
5 4 3 2 1 9 8 7 6
F
Flex Side A
Flex Side A
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Size 9S
31 30 29 28 27 26 25 24 23 22 21 2019 18 17
Flex Side B
Size 31S
G
Flex Side B
H
.700
.150
Size 9S
Size 31S
J
.900 .025 .050
.350
.025 .050
K
Flex Side A 8 7 6 5 4 3 2 1
Flex Side A Size 15S
15 14 13 12 11 10 9
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
Size 37S
L
Flex Side B
Flex Side B .300
M
.850
Size 15S
Size 37PS
N
.500 .025 .050 11 10 9 8 7 6 5 4 3 2 1 21 20 19 18 17 16 15 14 13 12
P
Flex Side A
Q
Size 21S Flex Side B
INDEX
.450
Size 21S
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-33 E-Mail:
[email protected]
Micro-D Filter
2470-1048 Combo Micro-D Filter Connector for Power Applications 2470-1048 Combo Micro-D Filter Connectors combine the size and weight advantages of a Micro-D connector with the added ability to handle higher power needs. Available in C filter configurations, with solder cup contact termination, PC tails or pre-wired.
A
B
C
D
E
4x Solder Cup To Accept 24 AWG Stranded Wire
F
4X .100 Max
G
4X .280 Max
.800 Max
.094
H .198 .192
J
1.430
K
L
4x Solder Cup To Accept 16 AWG Stranded Wire
1.215 D
C
5
3
B
A
A
.096 2xø .088
P
INDEX
Q
5
3
C
D
.350 Max
.381 Max
12
9
Notes
1.050 Max
1. Electrical Performance: • Insulation Resistance: 5000 megohms Min at 100 Vdc • Dielectric Withstand Voltage: 250 vdc • Capacitance: pins A, B, C, D, 3, 5, 9 and 12 to be 38–56 nF Pi filter (filter class A). All remaining signal lines are fitted with dummy contacts with no termination. Signal current rating: 3 Amps Max Power current rating: 7.5 Amps Max 2. Assembly to be identified with Glenair’s name, part number and date code space permitting.
© 2013 Glenair, Inc.
12
9
M
N
B
Materials / Finishes • • • • •
Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-34 E-Mail:
[email protected]
Micro-D Filter
249-EMITS-MICRO EMITS EMI Troubleshooter Micro-D Edition EMITS is designed for fast troubleshooting of EMI issues. Reduce time and money spent at test labs debugging EMI problems with this portable kit. Lightweight, high-strength anodized aluminum case comes supplied with low, medium, and high capacitance filters in size 9 through 37 position Micro-Ds, and a hand-held LCR meter.
A B C
19
Sample Part Number Series Plating
249-EMITS-MICRO
-2
4
7
10
13
16
2
5
8
11
14
17
3
6
9
12
15
18
249-EMITS-MICRO 2 - Aluminum / Electroless Nickel 5 - Aluminum / Gold
EMI TroubleShooter Micro-D Edition
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
Item Part Number* 1 240-033-X-9PSCEN 2 240-033-X-9PSCAN 3 240-033-X-9PSPAN 4 240-033-X-15PSCEN 5 240-033-X-15PSCAN 6 240-033-X-15PSPAN 7 240-033-X-21PSCEN 8 240-033-X-21PSCAN 9 240-033-X-21PSPAN 10 240-033-X-25PSCEN 11 240-033-X-25PSCAN 12 240-033-X-25PSPAN 13 240-033-X-31PSCEN 14 240-033-X-31PSCAN 15 240-033-X-31PSPAN 16 240-033-X-37PSCEN 17 240-033-X-37PSCAN 18 240-033-X-37PSPAN 19 738X CASE 20 U1733C LCR METER 21 7278A35 TOOL 22 5274T62 VIAL 23 249-033 JACK SCREW/JACK POST * See 240-033 for filter connector details
U.S. CAGE Code 06324
E F
20 21 22 23
G Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 18
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-35 E-Mail:
[email protected]
H J K L M N P Q INDEX
How To Order EMITS
1
D
glass-to-metal seal
MIL-DTL-83513
Micro-D hermetic connectors for high pressure/low leakage applications
M
IL-DTL-83513 type Micro-D hermetic connectors feature machined Kovar® shells and contacts with moisture resistant plating and paired with high performance contacts that make these connectors an excellent solution for high pressure and low leakage applications where vibration and shock are a concern. Hermetic Micro-D Connectors are rated at 1 x 10-7 cc/helium per second and are available in solder cup, PC tail and prewired pigtail termination options. Choose from 9 shell sizes to accomodate 9 to 100 sockets. Glenair Micro-D hermetic connectors are in stock and available for immediate shipment.
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Micro-D Hermetic
Section H Micro-D Glass-Sealed Hermetic Connectors Product Selection Guide Glenair’s Hermetic Micro-D Connectorsfeature fused glass insulators to provide an airtight seal. These connectors are 100% tested to meet a maximum leak rate of 1 X 10-7 cc's per second of helium. Matched Kovar® Seal– The shells and contacts are machined from Kovar®, an iron-nickel-cobalt alloy which forms a chemical bond with the vitreous glass insulator. The contacts are goldplated and the shell is nickel-plated. Choose Solder Cup, PC Tails or Pre-Wiredin two styles: panel mount for soldering or o-ring mount.
Solder Mount Hermetic PC Tail Contacts Page H-6
Front Panel Mount Shell Size 9-21 Hermetic Page H-9 Front Panel Mount Shell Size 37 Hermetic Page H-8
© 2013 Glenair, Inc.
C D E F
Solder Mount Hermetic These Kovar® alloy connectors are available in three styles: solder cup contacts, PC tail contacts or pre-wired and epoxysealed. Socket contacts are Kovar® alloy with gold plating. These connectors can be front- or rear-panel mounted. Installation requires soldering, brazing or welding to the bulkhead. Helium leak rate is 1 X 10-7 cc's per second.
G H J K L
Front Panel Mount Hermetic These Kovar® alloy connectors are available with 2 or 3 row solder cup or PC tail, and socket termination options
M N P
Hermetic for Rear-Panel Mounting RPM Hermetic Page H-10
B
Avoid the expense of soldering with this o-ring version. Blind tapped mounting holes and integral jackposts provide easy installation. Three termination options are available: solder cup, PC tails, or pre-wired to protect and insulate the solder joints. High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-1 E-Mail:
[email protected]
Q INDEX
Solder Mount Hermetic Solder Cup Contacts Page H-6
A
Micro-D Hermetic
Micro-D Hermetic Connectors General Information
A B C D E F G H J K L M N P Q
A Full Range of MIL-DTL-83513 Type Micro-D Hermetic Connectors Product Applications
Glenair MIL-DTL-83513 type Micro-D hermetic connectors are ideal for high-pressure/ low-leakage applications where size, weight and vibration resistance are a critical concern. Sophisticated electronics enclosures, vacuum chambers and cryogenic equipment all benefit from the airtight seal and moisture resistant plating found on Glenair hermetic Micro-D connectors. Solder mount, and rear panel O-ring shell styles are available to meet a variety of design requirements.
Materials
Kovar®—an iron nickel alloy—is used in both the shells and contacts, and provides a chemical bond with the glass insulator for maximum hermeticity. Shells are then plated with nickel after the glass insulator is fired to enhance corrosion resistance. Contacts are plated with gold to ensure superior electrical conductivity.
Solder Mount and Rear Panel Sealing Options 9 to 100 Sockets in 9 Shell Sizes Space Grade Special Screening Available
Connectors are offered with a minimum of 9 sockets, up to a maximum of 100 sockets—in two, three and four row solder cup and pigtail configurations. Fluorosilicone rubber interfacial seals and O-rings ensure positive sealing with plug connectors and panels. Gold plated Kovar® socket contacts boast superior vibration resistance when used in conjunction with Glenair’s innovative TwistPin contact system in the plug.
1 x 10-7 cc/Helium per Second Leakage Rate
Same-Day Inventory
Machined Kovar® Shells and Contacts with Moisture Resistant Plating
Because Glenair makes all its hermetic connectors in-house, including the machining of shells, molding of interfacial seals and firing of hermetic components, we can offer you outstanding availability on stock products and fast turnaround on special orders.
Solder Cup, PC Tail and PreWired Pigtail Termination Options
INDEX
Catalog contents—including part numbers, materials and dimensions—are accurate to the best of our ability when we go to print. Even so, customers are advised to consult the factory for the latest specifications, particularly to confirm critical dimensions such as connector lengths, threads, and so on. Corrected content is posted immediately to www.glenair.com © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-2 E-Mail:
[email protected]
Micro-D Hermetic
Micro-D Hermetic Connectors General Information
Micro-D Hermetic Connectors Hermeticity is defined as "the state or condition of being airtight". Sophisticated military electronics enclosures can experience electrical failure from ingress of moisture. System engineers can design the enclosure to withstand exposure to moisture and condensation by using "moisture-hardened" components and conformal coatings, but often the most practical approach is to install hermetically sealed electrical I/O connectors. Glass-to-metal seals provide assurance that, over the life of the enclosure, the accumulated amount of water vapor inside the box will not exceed the amount necessary to form condensation. Other applications for Micro-D hermetic connectors include vacuum chambers, cryogenics, and enclosures filled with inert gas. Kovar® Alloy Glenair's hermetic Micro-D shells and contacts are made from a special alloy called Kovar®, an iron-nickel-cobalt alloy consisting of 54% Fe, 29% Ni, and 17% Co. This alloy is covered by SAE specification AMS-I-23011. Kovar has a relatively low coefficient of thermal expansion.
Micro-D Hermetic Plating Options Unlike regular connectors which are plated as components prior to assembly, hermetic connectors are electroplated after the parts are fired and cleaned of oxides. Typically the contacts are gold-plated and the connector shell is nickel-plated.
Matched Glass-To-Metal Seals Matched seals rely on a chemical bond between the metal and the glass. Kovar contacts and shells are first exposed to high temperatures in order to develop an oxide coating. Then, the borosilicate glass and metal components are assembled with fixtures and are fused in a firing furnace at 900° C. A strong chemical bond is created between the metal and glass. Unlike compression seals which rely on different thermal coefficients of expansion between the glass and metal, a matched seal offers better resistance to stress from thermal extremes.
Connector Installation Hermetic connectors are typically soldered or welded into panels or bulkheads. Laser welding is a good option if the connector is mounted onto a Kovar or stainless steel panel. If the panel is aluminum alloy, then soldering is recommended. Micro-D's with o-ring seals offer another alternative. O-rings, when installed properly, will provide a very low permeability seal. The seating surface must be free from scratches or imperfections. A 32 finish is acceptable, but a 16 finish is preferred. The o-ring can be coated with a light coat of vacuum grease.
He
B C D E F G H J K L M N
Helium Leak Tester
P Q
Helium Tank
INDEX
Hermetic Testing All Micro-D hermetic connectors are 100% tested prior to shipment. A helium leak test is performed to certify the hermetic seal. This test is conducted by inducing a 1 ATM vacuum on one side of the connector. Helium gas is released on the other side, and a mass spectrometer "counts" the number of helium molecules that penetrate the connector seal. Helium leak testing takes advantage of the small size of a helium molecule compared to air or water vapor. Helium is inert, rare in our atmosphere, and is easy to detect with a mass spectrometer.
Hermetic Connector
A
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-3 E-Mail:
[email protected]
Micro-D Hermetic
Micro-D Hermetic Connectors General Information
A B C D E F G H J
Micro-D Hermetic Connector Design Notes
beryllium copper. The Micro-D socket contact is a cylinder and does not provide any spring force, so Micro-D hermetic connectors are always receptacle connectors with socket contacts.
“Why can't I get a hermetic Micro-D with pin contacts instead of sockets?”
“What about high pressure?” “What is the maximum recommended pressure rating for a hermetic Micro-D?”
The Micro-D TwistPin contact cannot be made from the materials that are required for hermetic contacts. Hermetic contacts are made from ferrous alloys such as Kovar® or Alloy 52. These alloys do not have spring properties. The Micro-D TwistPin contact is made from spring-temper
MICRO-D CONTACT ARRANGEMENTS (FACE VIEW SOCKET CONNECTOR) 5
4
9
3
8
P Q
7
1
6
8
7
6
5
4
3
2
15 Socket 8
7
6
5
4
3
2
11 10 9
1
15 14 13 12 11 10 9
16 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
21 Socket
1
13 12 11 10 9
21 20 19 18 17 16 15 14 13 12
8
7
6
5
4
3
2
25 24 23 22 21 20 19 18 17 16 15 14
25 Socket
19 18 17 16 15 14 13 12 11 10 9
8
7
6
5
4
3
2
37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
31 Socket
37 Socket 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
8
7
6
1
1
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
5
4
3
2
1
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27
51 Socket (Special 2 Row)
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36
51 Socket (Standard 3 Row) 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
51 50 41 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27
L N
2
9 Socket
K M
Glenair hermetic Micro-D's are built to safely withstand 1000 PSI of hydrostatic pressure in an open face (unmated) condition.
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76
100 Socket
INDEX
Performance Specifications
Materials and Finishes
1.5 AMP 150 VAC 100 VDC 5000 Megohms Minimum 40-50 Milliohms Maximum Maximum Helium Leak Rate 1 X 10-7 cc's per Hermeticity Second at One Atmosphere Operating Temp. -55° C. to +125° C. Shock 50 g. Vibration 20 g. Meets NASA Outgassing Requirements Outgassing (mod code 429) Mating Force (10 Ounces) X (# of Contacts) For additional performance requirements, please refer to MIL‑DTL‑83513
Kovar® Alloy in Accordance With SAE AMS-I-23011 Class 1, Plated with Electrodeposited Nickel In Connector Shell Accordance With SAE-AMS-QQ-N-290 Class 2, 0.00020.0003 Inches Thick. Insulator Borosilicate Glass Interfacial Seal Fluorosilicone Rubber, Blue Kovar® Alloy in Accordance With SAE AMS-I-23011 Class 1, Gold Plated In Accordance With ASTM B 488 Socket Contact Type II, Class 1.27 (50 microinches minimum) over Nickel Underplate in Accordance With SAE-AMS-QQ-N-290 Class 2. O-Ring Fluorosilicone Rubber, Blue Encapsulant Epoxy
Current Rating DWV Working Voltage IR Contact Resistance
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-4 E-Mail:
[email protected]
Micro-D Hermetic
Micro-D Hermetic Connectors General Information MICRO-D PCB FOOTPRINTS (COMPONENT SIDE OF BOARD) .050 (1.27) TYP .200 (5.08) Ref 9
.050 (1.27) TYP
6
.050 (1.27) TYP
.043 (1.09) Ref .022 (.56) Ref
1
11
.050 (1.27) TYP
13
12
21
.050 (1.27) TYP
.050 (1.27) TYP .025 (.64)
ø.023 (.58) MIN
.050 (1.27) TYP
.050 (1.27) TYP
.050 (1.27) TYP
1
37
.050 (1.27) TYP
1.250 (31.75) Ref 1
36
51
.050 (1.27) TYP .050 (1.27) TYP
.050 (1.27) TYP
.050 (1.27) TYP
26
.050 (1.27) TYP
1 27
51
.050 (1.27) TYP
ø.023 (.58) MIN
51 Socket (Standard 3 Row)
.022 (.56) Ref
.025 (.64)
.050 (1.27) TYP
26
19
.043 (1.09) Ref ø.023 (.58) MIN
51 Socket (Special 2 Row) 1.250 (31.75) Ref .025 (.64) .050 (1.27) TYP
51 75
.022 (.56) Ref
27 52
100
76
.050 (1.27) TYP
ø.023 (.58) MIN
© 2013 Glenair, Inc.
K
N
Connector Weights For 177-140H Hermetic Solder Mount
Hermetic Leak Rate Mod Codes Designator
Required Leak Rate
–585A
1 x 10-10 cc Helium per second
–585B
1 x 10-9 cc Helium per second
–585C
1 x 10-8 cc Helium per second
PCB 4.5 6.8 8.0 8.4 9.2 10.4
High Performance Micro-D Connectors and Cables
P Q INDEX
Layout 9 15 21 25 31 37
J
M
.043 (1.09) Ref .043 (1.09) Ref
100 Socket
Maximum Weight In Grams Solder Cup 4.7 7.1 8.2 8.7 9.5 10.8
H
L
.043 (1.09) Ref 1
F G
20
.025 (.64) ø.023 (.58) MIN
37 Socket
.850 (21.59) Ref .025 (.64) .050 (1.27) TYP
ø.023 (.58) MIN
.043 (1.09) Ref .022 (.56) Ref
19
.050 (1.27) TYP
17
35
.043 (1.09) Ref
E
.050 (1.27) TYP
31 Socket
18
.050 (1.27) TYP .025 (.64)
.900 (22.86) Ref
1
.043 (1.09) Ref
D
25 Socket
16
.022 (.56) Ref ø.023 (.58) MIN
.043 (1.09) Ref .022 (.56) Ref 1 14
25
ø.023 (.58) MIN
.750 (19.05) Ref .025 (.64)
31
C
.600 (15.24) .050 (1.27) TYP
21 Socket
.043 (1.09) Ref
B
.050 (1.27) TYP
15 Socket
.500 (12.7) .050 (1.27) TYP
.022 (.56) Ref
9
15
ø.023 (.58) MIN
9 Socket
A
.043 (1.09) Ref 1
8
1
.025 (.64)
.025 (.64) .050 (1.27) TYP
.022 (.56) Ref
5
ø.023 (.58) MIN
.350 (8.89) Ref
.043 (1.09) Ref
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-5 E-Mail:
[email protected]
Micro-D Hermetic
177-140H Solder Cup or PC Tail and 177-704H Insulated Wire Micro-D Hermetic Connectors Solder, Braze or Weld Mount
Solder, Braze, or Weld these 177-140 and 704 Hermetic Micro-D connectors. Featuring a matched glass-to-metal seal, these socket receptacles are designed for panel mounting.
MATES WITH All
Kovar® Shells and Contacts comply with applicable MILDTL-83513 space requirements and are 100% intermateable with standard connectors. Choose 9 to 100 Contacts, with gold-plated contacts and nickel-plated shells. These connectors feature integral female jackposts.
83513
Pin Connectors
How To Order Hermetic Micro-D Connectors with Solder Cups 177-140H
Sample Part Number Series
177-140H Hermetic Micro-D
Number of Contacts
9, 15, 21, 25, 31, 37, 51-3, 51-2, 100 (Table I)
Termination Type
SS - Solder Cup, Socket SP - PC Tail, Socket
Notes
H
1. Use of Threaded helical coil insert manufacturers option 2. Glenair's 177-140 hermetic socket connector mates with all standard MIL-DTL-83513 pin connectors (MWDM series). 3. Connector may be back potted 4. Use threaded helical coil insert manufactures option.
5. Connector may be back potted 6. Performance: • Hermeticity 1 x 10-6 scche/sec @ 1 atmosphere differential • Dielectric withstanding voltage: sea level 150 vac • Insulation resistance: 5000 megohms min.
31
SS
7. Material/finish • Shell: kovar alloy/electro-deposited nickel • Socket contacts: Kovar® alloy/ gold plate • Insulator: borosilicate glass • Interfacial seal, o-ring: fluorosilicone/n.a. • Potting: epoxy
How To Order Hermetic Micro-D Connectors with Insulated Wire 177-704H
Sample Part Number Series
177-704H Hermetic Micro-D with Insulated Wire
Number of Contacts
9, 15, 21, 25, 31, 37, 51-3, 51-2, 100 (Table I)
Contact Type
S - Socket Contacts, Pre–Wired
Wire Gage (AWG)
6 – 26 8 – #28 0 – #30
Wire Type Wire Color Wire Length Inches
Notes
S
6
K
1
-18
K – M22759/11 J – M22759/33 600 Vrms Fluoropolymer (TFE) (Not Available in #30 AWG) 600 Vrms Modified Cross-Linked Tefzel® (ETFE) 1 – White 2 – Yellow 5 – Color-Coded Stripes Per MIL-STD-681 (#26 gage only) 7 – Ten Color Repeat 18 – Wire Length In Inches. “18” Specifies 18 Inches.
1. Glenair 177-704 hermetic socket connector mates with all standard MIL-DTL-83513 pin connectors (MWDM series). 2. Performance: • Hermeticity 1 x 10-6 scche/sec @ 1 atmosphere differential • Dielectric withstanding voltage: sea level 150 vac • Insulation resistance: 5000 megohms min. 3. Connector may be back potted. 4. Use threaded helical coil insert manufactures option.
© 2013 Glenair, Inc.
25
5. Material/finish • Shell: kovar alloy/electro-deposited nickel • Socket contacts: Kovar® alloy/ gold plate • Insulator: borosilicate glass • Interfacial seal, o-ring: fluorosilicone/n.a. • Potting: epoxy
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-6 E-Mail:
[email protected]
Micro-D Hermetic
177-140H Solder Cup or PC Tail and 177-704H Insulated Wire Micro-D Hermetic Connectors Solder, Braze or Weld Mount
Table I: Dimensions A C B
.125 ± .015 (3.18 ± 0.38)
D
E
.021/.018 (0.53/0.46) PC TAIL
2-56 UNC Thread 9-69 CONTACTS #2-56 THREADS 100 CONTACTS #4-40 THREADS See Note 4
TWO ROW .180 (4.57) MAX. THREE & FOUR ROW .260 (6.60) MAX.
F G .076 ± .005 (1.93 ± 0.13)
SOLDER CUP
H
WIRE LENGTH +1.0 (2.54)/-0.0 .500 (12.7) MAX.
H
J
PRE-WIRED
.025 (0.64) RADIUS 4 PLCS.
A Max. Layout 9S 15S 21S
25S 31S 37S 51S 2 Row 51S 3 Row 100S
In. .785 1.030 1.180 1.280 1.430 1.580 1.930 1.530 2.260
B
C MAX.
In . mm. In. mm. mm. ± .005 ± 0.13 ± .005 ± .013 19.94
26.16 29.97 32.51 36.32 40.13 49.02 38.86 57.40
.565 .715 .865 .965 1.115 1.265 1.615 1.215 1.800
14.35 18.16 21.97 24.51 28.32 32.13 45.08 30.86 45.72
.695 .855 1.005 1.105 1.255 1.425 1.775 1.361 2.010
14.35 21.71 25.53 28.06 31.88 36.20 45.09 34.57 51.05
D Max.
E Max.
F
G Max.
In. mm. mm. ± .004 ± 0.10
In.
mm.
In.
.250 .250 .250 .250 .250 .250 .250 .310 .330
6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.87 8.38
.310 .425 .425 .425 .425 .425 .425 .468 .517
7.87 10.80 10.80 10.80 10.80 10.80 10.80 11.89 13.13
.195 .195 .195 .195 .195 .195 .199 .199 .199
EPOXY POTTING
4.95 4.95 4.95 4.95 4.95 4.95 5.05 5.05 5.05
In. .394 .394 .394 .394 .394 .394 .394 .394 .394
10.01 10.01 10.01 10.01 10.01 10.01 10.01 10.01 10.01
TABLE II SIZE 9 15 21 25 31
F DIM in .410/.405 .550/.545 .765/.760 .800/.795 .950/.945
© 2013 Glenair, Inc.
G DIM
mm 10.41/10.29 13.97/13.84 20.32/20.19 20.32/20.19 24.13/ 24.00
in .280/.275 .270/.265 .270/.265 .270/.265 .270/.265
mm 7.11/ 6.99 6.86/ 6.73 6.86/6.73 6.86/ 6.73 6.86/ 6.73
SIZE 37 51 51-2 100
H
J
In. mm. In. mm. mm. ± .004 ± 0.10 ± .004 ± 0.10 .398 .535 .750 .785 .935 1.085 1.435 1.032 1.765
10.11 13.59 19.05 19.94 23.75 27.56 36.45 33.101 44.8
.268 .255 .255 .255 .255 .255 .250 .300 .355
6.81 6.48 6.48 6.48 6.48 6.48 6.35 7.62 9.0
F
F DIM in 1.100/1.095 1.045/1.040 1.450/1.445 1.780/1.775
mm 27.94/ 27.81 26.54/ 26.42 36.83/ 36.70 45.21/45.09
High Performance Micro-D Connectors and Cables
G DIM in .270/.265 .310/.305 .270/.265 .370/.365
mm 6.86/ 6.73 7.87/ 7.75 6.86/ 6.73 9.40/ 9.271
U.S. CAGE Code 06324
PANEL CUT-OUT (PER TABLE II)
R.035/.030 TYP 4 PL
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-7 E-Mail:
[email protected]
G
Micro-D Hermetic
177-232 MIL-DTL-83513 Type Micro-D Hermetic Connectors Size 37 Front Mount
A
Conductive Elastomer O-Ring eliminates the cost of soldering the connector to a bulkhead.
B
Kovar® Shells and Contacts comply with applicable MILDTL-83513 requirements and are 100% intermateable with standard connectors.
How To Order PC Tail Connectors Series 177-232 Micro-D Hermetic Socket Shell, Size 37, Front Mount
Sample Part Number
C
177-232
D E
.198 (5.03) .192 (4.8 8
1.656 (42.06) .500 (12.7)
F
1.265 (32.13)
Ø.033/.032 (0.84/0.81)
1 37
20
INTERFACIAL SEAL
Ø.022/.018 (0.56/0.46)
.173 (4.39) .165 (4.19)
#2-56 INTEGRAL JACKPOST MOUNT
H
.379 (9.63)
1.622 (41.20)
J
1.446 (36.73)
K
1.104 (28.04)
1.265 (32.13)
L
.466 (11.84)
R.100 TYP 4 PL
.255 (6.48)
.290 (7.37)
M
#2-56 MOUNTING HOLES
N Q
.210 (5.33)
.065/.051 (1.65/1.30) TYP 37 PL
19
G
P
.092 (2.34)
Notes
INDEX
1. Glenair's 177-232 hermetic socket connector mates with all standard MIL-DTL-83513 37 pin connectors (MWDM series). 2. Performance: hermeticity: 1 x 10-8scche/sec @ 1 atmosphere differential dielectric withstanding voltage: sea level 150 vac insulation resistance: 5000 megohms max. 3. Assembly to be identified with Glenair's name, part number and date code space permitting. 4. Assembly to be identified with Glenair's name, part number, and date code, space permitting
© 2013 Glenair, Inc.
Material/finish
5. Shell: Kovar® alloy/electro-deposited nickel Socket contacts: Kovar® alloy/ gold plate Interfacial seal: fluorosilicone elastomer 6. O-ring: conductive elastomer, chomerics 10-00-2068-1215 7. Mounting screws: 18-8 Cres, #2-56 x .187 Button-head socket head cap screw supplied with connector (2 each)
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-8 E-Mail:
[email protected]
Micro-D Hermetic
177-859 MIL-DTL-83513 Type Micro-D Hermetic Connectors Shell Size 9-21 Front Panel Mount
Fluorosilicone O-Ring eliminates the cost of soldering the connector to a bulkhead. Kovar ® Shells and Contacts comply with applicable MILDTL-83513 requirements and are 100% intermateable with standard connectors.
How To Order Hermetic Micro-D Connectors with Solder Cup or PC Tail 177-859
Sample Part Number
15
Series
177-859 Micro-D Hermetic
Number of Contacts
-9, -15, -21 (Table II)
O-Ring Material
-1 - Viton -02 - Nitrile -3 - Fourosilicone -4 - Silicone -5 - Conductive
R.100 TYP 4 PL
F
A
E D
H
1
19
.255
37
20
#2-56 INTEGRAL JACKPOST MOUNT
.198 (5.03) .192 (4.88)
.110 (2.79) MAX.
.065/.051 (1.65/1.30)
2Xø.093 ± .003 (2.36 ± 0.08) MOUNTING HOLE
Layout. 9 15 21
INTERFACIA L SEAL .173 .165
G ±.020
F RECOMMENDED PANEL CUT-OUT
A 1.176 1.326 1.416
Table II: Contact Dimensions B C D E 0.565 0.380 0.600 0.776 0.715 0.530 0.750 0.926 0.865 0.680 0.840 1.016
F 0.976 1.126 1.216
G 0.500 0.650 0.725
Notes
.379
#2-56 UNC-2B TYP 2 PL
© 2013 Glenair, Inc.
B
.500 (12.7)
C
.466 .290
R.030 TYP
-1
.250 .220
1. Conductive o-ring material - chomerics 1215 or equivalent. 2. Glenair's 177-859 hermetic socket connector mates with all standard MILDTL-83513 pin connectors (mwdm series). 3. Performance: • Hermeticity: 1 x 10-8 Scche/sec @ 1 atmosphere differential • Dielectric withstanding voltage: sea level 150 vac • Insulation resistance: 5000 megohms max. • Assembly to be identified with Glenair's name, part number and date code space permitting.
Material/finish
• Shell: Kovar alloy/electro-deposited nickel socket coantacts: Kovar® alloy/ gold plate interfacial • Seal: fluorosilicone elastomer
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-9 E-Mail:
[email protected]
Micro-D Hermetic
177-705H Solder Cup or PC Tail and 177-706H Insulated Wire Micro-D Hermetic Connectors Rear Panel Mount
Fluorosilicone O-Ringeliminates the cost of soldering the connector to a bulkhead. Kovar® Shells and Contactscomply with applicable MILDTL-83513 requirements and are 100% intermateable with standard connectors.
MATES WITH All
83513
Pin Connectors
Solder Cup, PC Tail or Pre-Wired and Fully PottedSuitable for #26 gage wire or smaller, solder cup versions feature gold-plated contacts. Choose PC tails for attachment to flex circuits or rigid boards. Solder cup versions are also available pre-wired and potted.
How To Order Hermetic Micro-D Connectors with Solder Cup or PC Tail 177-705 H
Sample Part Number Series
177-705H Hermetic Micro-D
Number of Contacts
9, 15, 21, 25, 31, 37, 51-2, 51-3, 100 (Table I)
Contact Type
SS - Solder Cup, Socket
Mounting Threads
U – #4 - 40 UNC M – M3 Metric
H
15
SS
U
K
1
-18
SP - PC Tail, Socket
How To Order Hermetic Micro-D Connectors with Insulated Wire 177-706H
Sample Part Number Series
177-706H Hermetic Micro-D
Number of Contacts
9, 15, 21, 25, 31, 37, 51-2, 51-3, 100 (Table I)
Contact Type
S - Socket Contacts, Pre-Wired
Wire Gage (AWG) Wire Type
Wire Color Wire Length Inches
© 2013 Glenair, Inc.
25
S
6
6 – #26 8 – #28 0 – #30 K – M22759/11 600 Vrms Fluoropolymer (TFE) (Not Available in #30 AWG) J – M22759/33 600 Vrms Modified Cross-Linked Tefzel (ETFE) 1 – White , 2 – Yellow, 5 – Color-Coded Stripes Per MIL-STD-681 (#26 gage only) 7 – Ten Color Repeat 18 – Wire Length In Inches. “18” Specifies 18 Inches.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-10 E-Mail:
[email protected]
Micro-D Hermetic
177-705H Solder Cup or PC Tail and 177-706H Insulated Wire Micro-D Hermetic Connectors Rear Panel Mount
Table I: Dimensions
A B C D E
TWO ROW .180 (4.57) MAX.
F 9-69 CONTACTS #2-56 THREADS 100 CONTACTS #4-40 THREADS
THREE, FOUR ROW .260 (6.60) MAX.
BLIND TAPPED MTNG HOLES #4-40
SOLDER CUP
EPOXY
WIRE LENGTH +1.0 (2.54)/-0.0
.094 ± .005 (2.39 ± 0.13)
G
.575 (14.60) MAX.
H
PRE-WIRED
H
J .125 ± .015 (3.18 ± 0.38) .021/.018 (0.53/0.46) PC TAIL
LK
A Max. Layout In. 9S 15S 21S 25S 31S 37S 51S 2 Row 51S 3 Row 100 S
mm.
B Max In.
mm.
C Max.
D In .
In .
mm.
1.488 37.80 1.011 25.67
.728
18.49
.565
1.638 41.61 1.161 29.48
.878
22.30
.715
1.788 45.42 1.311 33.29 1.028 32.51 1.888 47.96 1.411 35.83 1.128 28.65
E Max. mm.
F Max.
G In.
In.
mm.
In.
mm.
14.35
.250
6.35
.675
17.14
.195
18.16
.250
6.35
.675
17.14
.195
.865
21.97
.250
6.35
.675
17.14
.965
24.51
.250
6.35
.675
2.038 51.76 1.561 39.64 1.278 32.46 1.115 28.32
.250
6.35
2.188 55.57 1.711 43.45 1.428 36.27 1.265 32.13
.250
6.35
2.538 64.47 2.061 52.35 1.778 45.16 1.615 41.02
.250
2.138 54.30 1.661 42.19 1.378 35.00 1.215 30.86 2.820 71.63 2.312 58.72 2.002 50.85 1.800 45.72
© 2013 Glenair, Inc.
± .005 ± 0.13
± .003 ± 0.08
H Max. mm.
J
mm.
4.95
.526
13.36 1.254 31.85
.257
4.95
.526
13.36 1.414 36.91
.257
.195
4.95
.526
13.36 1.564 39.72
17.14
.195
4.95
.526
.675
17.14
.195
4.95
.675
17.14
.195
4.95
6.35
.675
17.14
.195
.310
7.87
.715
18.16
.330
8.38
.795
20.19
High Performance Micro-D Connectors and Cables
mm.
In.
In.
L Max. mm.
In.
mm.
6.89
.358
9.09
6.89
.358
9.09
.257
6.89
.358
9.09
13.36 1.664 42.26
.257
6.89
.358
9.09
.526
13.36 1.814 46.07
.257
6.89
.358
9.09
.526
13.36 1.984 50.39
.257
6.89
.358
9.09
4.95
.526
13.36 2.334 59.28
.257
6.89
.358
9.09
.195
4.95
.526
13.36 1.920 48.77
.257
6.89
.358
9.09
.195
4.95
.599
15.21 2.569 65.25
.257
6.89
.358
9.09
± .004 ± 0.10
In.
K
U.S. CAGE Code 06324
± .004 ± 0.10
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-11 E-Mail:
[email protected]
Micro-D Hermetic
177-705H Solder Cup or PC Tail and 177-706H Insulated Wire Micro-D Hermetic Connectors Rear Panel Mount
Table II: Panel Cutout Dimensions for 177-705 and 177-706
A B C FULL RADIUS Ø .134 ± .004 (3.40 ± 0.10) 2 PLCS
H
Layout 9 15 21 25 31 37 51 2 row 51 3 row 100
A
B
C
In. ± .003
mm. ± 0.08
In. +.005/-0.0
mm. +0.13/-0.0
In. + .005/-0.0
mm. + 0.13/-0.0
1.011 1.161 1.311 1.411 1.561 1.711 2.061 1.661 2.312
25.69 29.50 33.31 35.85 39.66 43.47 52.35 42.19 58.72
.731 .881 1.031 1.131 1.281 1.431 1.781 1.381 2.005
18.56 22.37 26.18 28.72 32.53 36.34 45.24 35.08 50.93
.252 .252 .252 .252 .252 .252 .252 .310 .330
6.40 6.40 6.40 6.40 6.40 6.40 6.40 7.87 8.38
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-12 E-Mail:
[email protected]
Micro-D Well-Master™ 260
Section J Well–Master™ High Temperature Micro–D Product Selection Guide
GHTM Well-Master™ High Temperature Micro-D Oil, gas ® and geothermal wells can expose electronic equipment to temperatures in excess of 200°, exceeding the recommended operating temperature of standard Micro-D Connectors. For these demanding environments Glenair has developed the WellMaster™ to provide continuous operation in temperatures of 260° or more. With key features such as rugged Passivated Stainless steel shells and hardware, high temperature liquid crystal polymer (LCP) insulators allow these connectors to survive the most demanding high-temperature environments.
GHTM Inulsated Wire Pigtails Page J-3
GHTM PCB Header Page J-6
© 2013 Glenair, Inc.
High Temperature Micro-D with insulated Wire
J High Temperature Back-to-Back Micro-D
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-1 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
+260°C PCB Header
+260°C Cable Connector
Glenair Well-Master 260 Micro-D Withstands Extreme High Temperature TM
J
Standard Micro-D connectors are rated for +125°C. Glenair's MWDM Micro-D can withstand +150°C continuous operating temperature and can be upgraded to +200°C if assembled with special high temperature epoxies. But oil, gas and geothermal wells can subject electronic instruments to temperatures as high as +260°C. The GHTM Series Micro-D meets the need for a high density, high performance connector capable of handling this temperature. The GHTM features contacts made from a special alloy that resists softening when exposed to temperatures up to +260°C (500° F). Rugged passivated stainless steel shells and hardware, high temperature liquid crystal polymer (LCP) insulators allow these connectors to survive the most demanding environments. Unique angled mounting ears allow the Well-Master™ 260° to fit in confined spaces. GHTM High Temperature Contact Arrangements 1 2 3 4 5
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 10 11
1 2 3 4 5 6 7 8 9 10 11 12 13
6 7 8 9
9 10 11 12 13 14 15
12 13 14 15 16 17 18 19 20 21
14 15 16 17 18 19 20 21 22 23 24 25
9
15
21
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
25 1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
31
37
51
Mating face of pin connector. Socket connector contact numbers are reversed. Specifications
Materials and Finishes Contacts Insulators Shell Mounting Hardware
Proprietary nickel alloy, gold plated Liquid crystal polymer (LCP) Stainless steel, passivated Stainless Steel
Insulated Wire
Nickel-coated copper, PTFE insulation per M22759/87 (260°C)
© 2013 Glenair, Inc.
Current Rating Contact Resistance Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration
High Performance Micro-D Connectors and Cables
3 Amps 8 milliohms maximum 600 Vac sea level 5000 megohms minimum -55° C. to +260° C. 50 g. 20 g.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-2 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D Insulated Wire Connectors
GHTM Pre-Wired Connectors with +260°C Mil Spec PTFE/Polyimide Wire GHTM Well-Master™ 260 pre-wired Micro-D connectors withstand +260°C continuous operating temperature. These .050" pitch Micro-D connectors are terminated to #24 AWG insulated wire. Nickel-coated copper wire conforms to M22759/87, PTFE/polyimide insulation. Pin contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. Machined passivated stainless steel shell. Glass-filled high temperature LCP thermoplastic insulators. 100% hi-pot tested. Meets performance requirements of MIL-DTL-83513. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +260°C. How To Order GHTM Pre-Wired Assembly GHTM
Sample Part Number
-31
s
-4
t
1
-18
Series
GHTM Glenair High Temperature Micro
Shell Size
9, 15, 21, 25, 31, 37, 51 See Table II for Thru-Hole and Jackscrew Connector Dimensions and Table III for Integral Jackpost Connector Dimensions
Contact Type
P - Pin/Plug
Wire Gage (AWG)
4 – #24
Wire Type
T – PTFE/Polyimide Insulated Nickel Coated Copper
Wire Color
1 – White
Wire Length (Inches)
18 – Wire Length In Inches. “18” Specifies 18 Inches.
Mounting Hardware
B - Std. Thru-Hole (Ø.089/.095) M - Hex Head Jackscrew S - Slot Head Jackscrew P - Integral Jackpost (See Table I)
B
S - Socket/Receptacle
Table I: GHTM Mounting Hardware B Std. Thru-Hole Mounting .096/.088 (2.43/2.23) Dia. (For dimensions see Table II)
M and S 2-56 Jackscrews # Slot head (S), Hex Head (M) (For dimensions see Table II)
P Integral Jackpost #2-56 (For dimensions see Table III)
Pin
Pin
Pin
Socket
Socket
Socket
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-3 E-Mail:
[email protected]
J
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D Insulated Wire Connectors
Table II:QGHTM Pre-Wired Connector Dimensions for Thru-Hole and Jackscrew Versions
Pin (Plug) Connector
Socket (Receptacle) Connector A
A B .215 (5.46) Max
C 11°
D
B
.215 (5.46) Max
C 11°
D
Pin 1
Skt 1
.094 (2.39)
F
.094 (2.39)
F
G .175 (4.45) Max
G H H
J E .175 (4.45) Max A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435
19.94 19.94 23.75 23.75 27.43 27.43 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
© 2013 Glenair, Inc.
.215 (5.46) Max
Length +1.00/-0.00 (+2.5/-0.0)
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
D
Length +1.00/-0.00 (+2.5/-0.0)
E Max.
In.
mm.
In.
mm.
In.
mm.
.290 .371 .440 .521 .590 .671 .690 .771 .840 .921 .990 1.071 .940 .951
7.37 9.42 11.18 13.23 14.99 17.04 17.53 19.58 21.34 23.39 25.15 27.20 23.88 24.16
.181 .181 .331 .331 .481 .481 .581 .581 .731 .731 .881 .881 .831 .831
4.60 4.60 8.41 8.41 12.22 12.22 14.76 14.76 18.57 18.57 22.38 22.38 21.11 21.11
.131 .215 .131 .215 .131 .215 .131 .215 .131 .215 .131 .215 .178 186
3.33 5.46 3.33 5.46 3.33 5.46 3.33 5.46 3.33 5.46 3.33 5.46 4.52 4.72
High Performance Micro-D Connectors and Cables
F
G Max.
In . mm. ± .003 ± 0.08 .199 .191 .199 .191 .199 .191 .199 .191 .199 .191 .199 .191 .195 .274
5.05 4.85 5.05 4.85 5.05 4.85 5.05 4.85 5.05 4.85 5.05 4.85 4.95 6.96
H Max.
In.
mm.
In.
mm.
.405 .405 .555 .555 .705 .705 .805 .805 .955 .955 1.105 1.105 1.055 1.055
10.29 10.29 14.10 14.10 17.91 17.91 20.45 20.45 24.26 24.26 28.07 28.07 26.80 26.80
.390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .350 .377
9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 8.89 9.58
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-4 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D Insulated Wire Connectors
Table III: GHTM Pre-Wired Connector Dimensions Integral Jackpost Version
Pin (Plug) Connector
Socket (Receptacle) Connector
A B
.215 (5.46) MAX
A
2X .086-56 UNC .190 (4.83) MIN DEEP
C
.215 (5.46) MAX
D
PIN 1 E
C D
11°
.190/.185 .094 (4.83/4.70) (2.39)
F
G
G .175 (4.45) MAX
H
A Max.
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
B
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435
19.94 19.94 23.75 23.75 27.43 27.43 30.01 30.01 33.91 33.91 37.72 37.72 36.4 36.4
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215
© 2013 Glenair, Inc.
In.
mm.
14.35 .290 7.37 14.35 .301 7.65 18.16 .440 11.18 18.16 .451 11.46 21.97 .590 14.99 21.97 .601 15.27 24.51 .690 17.53 24.51 .701 17.81 28.32 .840 21.34 28.32 .851 21.62 32.13 .990 25.15 32.13 1.001 25.43 30.9 .940 23.88 30.9 .951 24.16
J LENGTH +1.00/-0.00 (+2.5/-0.0)
.215 (5.46) MAX
C Max.
In . mm. ± .003 ± 0.08
.175 (4.45) MAX
H
LENGTH +1.00/-0.00 (+2.5/-0.0)
Layout
11°
SKT 1
J
F
2X .086-56 UNC .180 (4.57) MIN DEEP
B
D
E Max.
In.
mm.
In.
mm.
.181 .181 .331 .331 .481 .481 .581 .581 .731 .731 .881 .881 .831 .831
4.60 4.60 8.41 8.41 12.22 12.22 14.76 14.76 18.57 18.57 22.38 22.38 21.11 21.11
.131 .215 .131 .215 .131 .215 .131 .215 .131 .215 .131 .215 .178 .186
3.33 5.46 3.33 5.46 3.33 5.46 3.33 5.46 3.33 5.46 3.33 5.46 4.52 4.72
High Performance Micro-D Connectors and Cables
F
G Max.
In . mm. ± .003 ± 0.08 .199 .274 .199 .274 .199 .274 .199 .274 .199 .274 .199 .274 .195 .274
5.05 6.96 5.05 6.96 5.05 6.96 5.05 6.96 5.05 6.96 5.05 6.96 4.95 6.96
H Max.
J
In.
mm.
In.
mm.
In.
mm.
.405 .405 .555 .555 .705 .705 .805 .805 .955 .955 1.11 1.11 1.06 1.06
10.29 10.29 14.10 14.10 17.91 17.91 20.45 20.45 24.26 24.26 28.07 28.07 26.92 26.92
.390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .390 .377 .350 .377
9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 9.91 9.58 8.89 9.58
.420 N/A .570 N/A .720 N/A .820 N/A .970 N/A 1.120 N/A 1.07 N/A
10.67 N/A 14.48 N/A 18.29 N/A 20.83 N/A 24.64 N/A 28.45 N/A 27.18 N/A
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-5 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers
GHTM Right Angle Printed Circuit Board Headers GHTM Well-Master™ 260 right angle PCB Micro-D connectors withstand +260°C continuous operating temperature. These .050" pitch Micro-D connectors have .020 inch diameter (0.51mm)gold-plated PC terminals. Terminal spacing is .100 inch by .075 inch (2.54 by 1.91mm). Pin contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. Machined passivated stainless steel shell with integral jackpost. Glass-filled high temperature LCP thermoplastic insulators to withstand soldering heat. Meets performance requirements of MIL-DTL-83513. Available with 9 to 51 contacts. 3 A., 600 Vac, -55°C to +260°C.
Pin (plug) connector
J
socket (receptacle) connector
GHTM Right Angle PCB Connector Ordering Information Layout
.080 Inch (2.03mm) PC Terminal Length
.110 Inch (3.18 mm) PC Terminal Length
.150 Inch (3.81 mm) PC Terminal Length
.172 Inch (4.37 mm) PC Terminal Length
.190 Inch (4.83 mm) PC Terminal Length
.205 Inch (5.21 mm) PC Terminal Length
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S
GHTM-9PRAP-.080 GHTM-9SRAP-.080 GHTM-15PRAP-.080 GHTM-15SRAP-.080 GHTM-21PRAP-.080 GHTM-21SRAP-.080 GHTM-25PRAP-.080 GHTM-25SRAP-.080 GHTM-31PRAP-.080 GHTM-31SRAP-.080 GHTM-37PRAP-.080 GHTM-37SRAP-.080 GHTM-51PRAP-.080 GHTM-51SRAP-.080
GHTM-9PRAP-.110 GHTM-9SRAP-.110 GHTM-15PRAP-.110 GHTM-15SRAP-.110 GHTM-21PRAP-.110 GHTM-21SRAP-.110 GHTM-25PRAP-.110 GHTM-25SRAP-.110 GHTM-31PRAP-.110 GHTM-31SRAP-.110 GHTM-37PRAP-.110 GHTM-37SRAP-.110 GHTM-51PRAP-.110 GHTM-51SRAP-.110
GHTM-9PRAP-.150 GHTM-9SRAP-.150 GHTM-15PRAP-.150 GHTM-15SRAP-.150 GHTM-21PRAP-.150 GHTM-21SRAP-.150 GHTM-25PRAP-.150 GHTM-25SRAP-.150 GHTM-31PRAP-.150 GHTM-31SRAP-.150 GHTM-37PRAP-.150 GHTM-37SRAP-.150 GHTM-51PRAP-.150 GHTM-51SRAP-.150
GHTM-9PRAP-.172 GHTM-9SRAP-.172 GHTM-15PRAP-.172 GHTM-15SRAP-.172 GHTM-21PRAP-.172 GHTM-21PRAP-.172 GHTM-25PRAP-.172 GHTM-25SRAP-.172 GHTM-31PRAP-.172 GHTM-31SRAP-.172 GHTM-37PRAP-.172 GHTM-37SRAP-.172 GHTM-51PRAP-.172 GHTM-51SRAP-.172
GHTM-9PRAP-.190 GHTM-9SRAP-.190 GHTM-15PRAP-.190 GHTM-15SRAP-.190 GHTM-21PRAP-.190 GHTM-21SRAP-.190 GHTM-25PRAP-.190 GHTM-25SRAP-.190 GHTM-31PRAP-.190 GHTM-31SRAP-.190 GHTM-37PRAP-.190 GHTM-37SRAP-.190 GHTM-51PRAP-.190 GHTM-51SRAP-.190
GHTM-9PRAP-.205 GHTM-9SRAP-.205 GHTM-15PRAP-.205 GHTM-15SRAP-.205 GHTM-21PRAP-.205 GHTM-21SRAP-.205 GHTM-25PRAP-.205 GHTM-25SRAP-.205 GHTM-31PRAP-.205 GHTM-31SRAP-.205 GHTM-37PRAP-.205 GHTM-37SRAP-.205 GHTM-51PRAP-.205 GHTM-51SRAP-.205
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-6 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers Table I: GHTM Right Angle PCB Dimensions for Pin (Plug) Connector
A
2X .086-56 UNC
B
.190 (4.83) MIN DEEP
C
H
F
D
E
4X.020 (0.51) TERMINAL LENGTH ± .015 (0.38)
.334 (8.48)
11°
PIN 1 G
.020 (0.51) ± .002 (0.05)
.190/.185 (4.83/4.70) .115 (2.92)
.315 (8.00)
F
.444 (11.28) .334 (8.48) 2X .086-56 UNC THRU-HOLE
4Xø.075 (1.91) A Max. Layout 9P 15P 21P 25P 31P 37P 51P
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .935 1.085 1.185 1.335 1.485 1.435
19.94 23.75 27.43 30.01 33.91 37.72 36.45
.565 .715 .865 .965 1.115 1.265 1.215
© 2013 Glenair, Inc.
14.35 18.16 21.97 24.51 28.32 32.13 30.86
D
E Max.
F Max.
G
H Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
.290 .440 .590 .690 .840 .990 .940
7.37 11.18 14.99 17.53 21.34 25.15 23.88
.181 .331 .481 .581 .731 .881 .831
4.60 8.41 12.22 14.76 18.57 22.38 21.11
.134 .134 .134 .134 .134 .134 .178
3.40 3.40 3.40 3.40 3.40 3.40 4.52
.648 .648 .648 .648 .648 .648 .798
16.46 16.46 16.46 16.46 16.46 16.46 20.27
.420 .570 .720 .820 .970 1.120 1.07
10.67 14.48 18.29 20.83 24.64 28.45 27.18
.215 .215 .215 .215 .215 .215 .258
5.46 5.46 5.46 5.46 5.46 5.46 6.55
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-7 E-Mail:
[email protected]
J
Micro-D Well-Master™ 260
Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers Table II: GHTM Right Angle PCB Dimensions for Socket (Receptacle) Connector
A
2X .086-56 UNC .180 (4.57) MIN DEEP
B E
C
G
4X.020 (0.51) F
D
TERMINAL LENGTH ± .015 (0.38)
11° SKT 1 .324 (8.23)
.020 (0.51) ± .002 (0.05)
.115 (2.92)
2X .086-56 UNC THRU-HOLE .444 (11.28) .324 (8.23) .315 (8.00)
4Xø.075 (1.91)
J
A Max. Layout 9S 15S 21S 25S 31S 37S 51S
© 2013 Glenair, Inc.
B
In.
mm.
In . ± .003
.785 .935 1.085 1.185 1.335 1.485 1.435
19.94 23.75 27.43 30.01 33.91 37.72 36.45
.565 .715 .865 .965 1.115 1.265 1.215
C Max.
D
E Max.
F Max.
G
mm. ± 0.08
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
14.35 18.16 21.97 24.51 28.32 32.13 30.86
.301 .451 .601 .701 .851 1.001 .951
7.65 11.46 15.27 17.81 21.62 25.43 24.16
.181 .331 .481 .581 .731 .881 .831
4.60 8.41 12.22 14.76 18.57 22.38 21.11
.142 .142 .142 .142 .142 .142 .186
3.61 3.61 3.61 3.61 3.61 3.61 4.72
.629 .629 .629 .629 .629 .629 .779
15.98 15.98 15.98 15.98 15.98 15.98 19.79
.215 .215 .215 .215 .215 .215 .258
5.46 5.46 5.46 5.46 5.46 5.46 6.55
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-8 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers
GHTM Right Angle PC Board Layouts: Pin (Plug) Connector Patterns shown are for component mounting side of PCB. Terminals are .022 (0.56) max. diameter, mounting holes are .093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations.
.050 (1.27)
.100 (2.54) TYP
.100 (2.54) TYP .075 (1.91) TYP
.315 (8.00) 1
3
2
6
5
4
9 8
7
.175 (4.45) .075 (1.91) TYP
.315 (8.00) 1
.015 (0.38)
.075 (1.91) .025 (0.64)
6 8 3 5 7 9 11 13 15 10 12 14 2
15 PIN
.050 (1.27)
.100 (2.54) TYP .250 (6.35)
.300 (7.62) .315 (8.00)
7
.050 (1.27) .100 (2.54) TYP
.075 (1.91) TYP 5
9
11
2 4 6 8 10 13 15 17 19 21 12 14 16 18 20
.075 (1.91) TYP
.315 (8.00) 1
.015 (0.38)
5
7 9 11 13 2 4 6 8 10 12 15 17 19 21 23 25 14 16 18 20 22 24 3
.075 (1.91) .025 (0.64) .865 (21.97)
21 PIN
© 2013 Glenair, Inc.
.015 (0.38)
.715 (18.16)
9 PIN
3
4
.075 (1.91) .025 (0.64)
.565 (14.35)
1
.050 (1.27)
High Performance Micro-D Connectors and Cables
.015 (0.38) .075 (1.91) .025 (0.64)
.965 (24.51)
25 PIN
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-9 E-Mail:
[email protected]
J
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers
GHTM Right Angle PC Board Layouts: Pin (Plug) Connector Patterns shown are for component mounting side of PCB. Terminals are .022 (0.56) max. diameter, mounting holes are .093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations.
.050 (1.27)
.100 (2.54) TYP .375 (9.53) .075 (1.91) TYP
.315 (8.00) 2 6 8 10 12 14 16 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 18 20 22 24 26 28 30 4
.015 (0.38)
.075 (1.91) .025 (0.64) 1.115 (28.32)
31 PIN .050 (1.27) .100 (2.54) TYP .450 (11.43) .075 (1.91) TYP
J
.315 (8.00) 3
9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 21 23 25 27 29 31 33 35 37 20 22 24 26 28 30 32 34 36 1
5
7
.015 (0.38)
.075 (1.91) .025 (0.64) 1.265 (32.13)
37 PIN
1
3 5 7 9 11 13 15 17 2 4 6 8 10 12 14 16 18 19 21 23 25 27 29 31 33 35 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 37 39 41 43 45 47 49 51
.060 (1.52)
.075 (1.90) TYP .025 (.635) TYP .050 1.27 TYP .075 (1.905) TYP .100 (2.54) TYP
51 PIN © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-10 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers
GHTM Right Angle PC Board Layouts: Socket (Receptacle) Connector Patterns shown are for component mounting side of PCB. Terminals are .022 (0.56) max. diameter, mounting holes are .093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations.
.050 (1.27)
.100 (2.54) TYP
.100 (2.54) TYP .075 (1.91) TYP
.175 (4.45) .075 (1.91) TYP
.315 (8.00) 5
3 4
9
8
1 2 6 7
.315 (8.00) 7 5 3 1 8 6 4 2 15 13 11 9 14 12 10
.015 (0.38)
.075 (1.91) .025 (0.64)
.715 (18.16)
9 SOCKET
.075 (1.91) TYP
15 SOCKET
.050 (1.27)
.050 (1.27) .100 (2.54) TYP
.075 (1.91) TYP
.015 (0.38)
.315 (8.00) 13 11 9 7 5 3 1 12 10 8 6 4 2 24 22 20 18 16 14 25 23 21 19 17 15
.075 (1.91) .025 (0.64) .865 (21.97)
21 SOCKET
© 2013 Glenair, Inc.
J
.300 (7.62) .315 (8.00)
11 9 7 5 3 1 10 8 6 4 2 20 18 16 14 12 21 19 17 15 13
.015 (0.38)
.075 (1.91) .025 (0.64)
.565 (14.35)
.100 (2.54) TYP .250 (6.35)
.050 (1.27)
High Performance Micro-D Connectors and Cables
.015 (0.38) .075 (1.91) .025 (0.64)
.965 (24.51)
25 SOCKET
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-11 E-Mail:
[email protected]
Micro-D Well-Master™ 260
GHTM Well-Master™ 260 High Temperature Micro-D
Right Angle Printed Circuit Board Headers
GHTM Right Angle PC Board Layouts: Socket (Receptacle) Connector Patterns shown are for component mounting side of PCB. Terminals are .022 (0.56) max. diameter, mounting holes are .093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations.
.100 (2.54) TYP .375 (9.53) .075 (1.91) TYP
.050 (1.27)
.315 (8.00) 15 13 11 9 7 5 3 1 16 14 12 10 8 6 4 2 31 29 27 25 23 21 19 17 30 28 26 24 22 20 18
.015 (0.38)
.075 (1.91) .025 (0.64) 1.115 (28.32)
31 SOCKET .050 (1.27) .100 (2.54) TYP .450 (11.43) .075 (1.91) TYP
J
.315 (8.00) 19 17 15 13 11 9 7 5 3 1 18 16 14 12 10 8 6 4 2 36 34 32 30 28 26 24 22 20 37 35 33 31 29 27 25 23 21
.015 (0.38)
.075 (1.91) .025 (0.64) 1.265 (32.13)
37 SOCKET
18 16 14 12 10 8 6 4 2 17 15 13 11 9 7 5 3 1 35 33 31 29 27 25 23 21 19 34 32 30 28 26 24 22 20 51 49 47 45 43 41 39 37 50 48 46 44 42 40 38 36
.060 (1.52)
.075 (1.90) TYP .025 (.635) TYP .050 1.27 TYP .075 (1.905) TYP .100 (2.54) TYP
51 SOCKET © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com J-12 E-Mail:
[email protected]
Special Applications
Glenair mOD-CODES Increase connector performance
G
lenair Mod-Codes offer a variety of customizations to commericial connectors to meet your specific application requirements such as space grade outgassing. Manufacturers of satellite communications systems, geophysical exploration devices, medical diagnostics and industrial equipment face many of the same packaging requirements for reduced size, weight and shape as do their military couterparts. The ability to design-in a wide range of custom modifications which fit the unique packaging requirements of these specialized applications is a distinct advantage of the Glenair Micro-D.
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Micro-D Special Apps and MODs
Section K Micro-D Special Applications and Modifications Micro-D Mod Code List
A
Mod 474 Keying Option Specially modified shells feature keys and keyways for up to five keying positions. Compatible with standard hardware and backshells.
Mod Code 474 Page K-2
B C D
Mod 497 Ground Spring Improve EMI shielding with plug connector ground springs. These gold-plated springs offer lower shellto-shell resistance and are compatible with standard mating receptacles.
Mod Code 497 Page K-4
E F G
Mod 497 Ground Spring Installation Procedure Complete and easy to follow step-by-step installation instructions for Micro-D Ball Ground Spring. Installed in four simple steps, this gold-plated stainless steel ground spring offers substantial improvement in EMI protection.
Mod Code 497 Page K-5
H J K
Mod 428 for 200° C. Continuous Temperature Standard Micro-D connectors are rated for 150° C. maximum continuous temperature. Mod 428 changes the potting compound to provide a 200° C. rating.
Mod Code 428 Page K-6
L M N
Mod Code 429 Page K-7
—2003–2
12242
uctio -002: Instr EEE-INST ting and Dera
ns for EEE
by: Prepared Sahu Dr. Kusum by: Revieweding Leidecker Dr. Henn ved by: Appro Lakins Darryl and Aeronautics tion National Administra Space Center Flight Space 20771 Goddard Maryland Greenbelt,
ening,
ction, Scre
Parts Sele
tion,
Qualifica
Mod 429 Space Grade Micro-D Save time and cost with the Mod 429 solution. Specify special NASA requirements without the expense of having to create special procurement documentation. This section also contains valuable information on Micro-D’s for space applications.
May 2003
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-1 E-Mail:
[email protected]
P Q INDEX
NASA/TP
Micro-D Special Apps and MODs
Micro-D Mod Code 474 Keying Options
Prevent Mis-Mating with Mod Code 474 Keying Option
A B C D
Keyed Micro-D connectors for “fail-safe” circuits feature specially modified shells to prevent mis-mating. The plug shell has a raised key, and the receptacle shell has a keyway. Plug Connector With Mod 474 Keying Option
The nine pin connector accommodates three key positions. All other sizes have five positions available. The letter code following Mod Code 474 specifies the key position. “474A” plugs mate to “474A” receptacles. Keyed plugs will not mate to unkeyed receptacles, but keyed receptacles will plug into standard unkeyed plugs.
E F G
How To Order Micro-D Connectors With Mod 474 Step 1: Find a Standard Micro-D Part Number Mod 474 keying is available on all standard metal shell Micro-D connectors, including solder cup, pre-wired and printed circuit board versions. This feature is not available on plastic Micro-D or M83513 connectors.
Example: MWDM2L-51PCBRP-.110
H
Step 2: Pick a Keying Position A letter code identifies the key position. The table on the following page shows the keying options for each shell size. Mod Code 474A mates to 474A receptacles, and so on.
J
Step 3: Add the Mod Code to the Part Number A letter code identifies the key position. The table on the following page shows the keying options for each shell size. Mod 474A plugs mate to 474A receptacles, and so on.
K L M N P Q
Example: 474B
Example: MWDM2L-51PCBRP-.110-474B
Micro-D Key Positions: Modification Code 474 Plug OFFSET
CL
Fig. 1 Receptacle OFFSET
CL
Fig. 6
Plug
Plug CL
CL
CL
Fig. 2
Fig. 4
Receptacle OFFSET
Receptacle CL
OFFSET
Fig. 5
Receptacle CL
OFFSET
OFFSET
CL
CL
Fig. 7
Plug CL OFFSET
Fig. 3
Receptacle
Figure 1 plug connector mates to Figure 6 receptacle, figure 2 mates to figure 7, and so on. Figure 11 mates to figure 12.
INDEX © 2013 Glenair, Inc.
Plug OFFSET
Fig. 8
Fig. 9
Plug CL
Receptacle CL
Fig. 11
Fig. 12
High Performance Micro-D Connectors and Cables
Fig. 10
Mating face of connector shown.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-2 E-Mail:
[email protected]
Micro-D Special Apps and MODs
Key Position Offsets
Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 75P 75S 100P 100S 130P 130S
Key Position A Offset Figure In. mm. 1 .025 0.64 6 .025 0.64 1 .090 2.29 6 .090 2.29 1 .130 3.30 6 .130 3.30 1 .180 4.57 6 .180 4.57 1 .200 5.08 6 .200 5.08 1 .300 7.62 6 .300 7.62 1 .225 5.72 6 .225 5.72 1 .400 10.16 6 .400 10.16 1 .600 15.24 6 .600 15.24 1 .225 5.72 6 .225 5.72 1 2.75 6.99 6 .275 6.99 1 .500 12.70 6 .500 12.70 1 .500 12.70 6 .500 12.70
Key Position B Offset Figure In. mm. 3 .025 0.64 8 .025 0.64 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00 2 .000 0.00 2 .000 0.00 1 .250 6.35 6 .250 6.35 1 .250 6.35 6 .250 6.35
Key Position C Offset Figure In. mm. 11 .000 0.00 12 .000 0.00 3 .090 2.29 8 .090 2.29 3 .130 3.30 8 .130 3.30 3 .180 4.57 8 .180 4.57 3 .200 5.08 8 .200 5.08 3 .300 7.62 8 .300 7.62 3 .225 5.72 8 .225 5.72 3 .400 10.16 8 .400 10.16 3 .600 15.24 8 .600 15.24 3 .225 5.72 8 .225 5.72 3 .275 6.99 8 .275 6.99 2 .000 0.00 7 .000 0.00 2 .000 0.00 7 .000 0.00
Key Position D Offset Figure In. mm. NA — — NA — — 4 .050 1.25 9 .050 1.27 4 .100 2.54 9 .100 2.54 4 .125 3.18 9 .125 3.18 4 .150 3.81 9 .150 3.81 4 .250 6.35 9 .250 6.35 4 .175 4.45 9 .175 4.45 4 .350 8.89 9 .350 8.89 4 .500 12.70 9 .500 12.70 4 .175 4.45 9 .175 4.45 4 .225 5.72 9 .225 5.72 3 .250 6.35 8 .250 6.35 3 .250 6.35 8 .250 6.35
Key Position E Offset Figure In. mm. NA — — NA — — 5 .050 1.25 10 .050 1.27 5 .100 2.54 10 .100 2.54 5 .125 3.18 10 .125 3.18 5 .150 3.81 10 .150 3.81 5 .250 6.35 10 .250 6.35 5 .175 4.45 10 .175 4.45 5 .350 8.89 10 .350 8.89 5 .500 12.70 10 .500 12.70 5 .175 4.45 10 .175 4.45 5 .225 5.72 10 .225 5.72 3 .500 12.70 8 .500 12.70 3 .500 12.70 8 .500 12.70
Mod Code 474 Rear Panel Mount Panel Cutouts Layout C A
Size 9-130 2XØ D
© 2013 Glenair, Inc.
4XR. .015 MAX. (0.4 MAX.)
B
9 15 21 25 31 37 51 51-2 67 69 75 100 130
A +.004 (0.10) -.000 0.408 10.36 0.558 14.17 0.708 17.98 0.808 20.52 0.958 24.33 1.108 28.14 1.058 26.87 1.458 37.03 4.858 123.39 1.358 34.49 1.458 37.03 1.508 38.30 1.808 45.92
High Performance Micro-D Connectors and Cables
B +.004 (0.10) -.000 0.301 7.65 0.301 7.65 0.301 7.65 0.301 7.65 0.301 7.65 0.301 7.65 0.343 8.71 0.301 7.65 0.301 7.65 0.343 8.71 0.343 8.71 0.386 9.80 0.386 9.80
C +.003 (0.076) -.003 (0.076) 0.565 14.35 0.715 18.16 0.865 21.97 0.965 24.51 1.115 28.32 1.265 32.13 1.215 30.86 1.615 41.02 2.015 51.18 1.515 38.48 1.705 43.31 1.8 45.72 2.150 54.61
U.S. CAGE Code 06324
ØD +.002 (0.051) -.000 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.126 3.20 0.148 3.76 0.148 3.76 0.148 3.76
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-3 E-Mail:
[email protected]
A B C D E F G H J K L M N P Q INDEX
Micro-D Mod Code 474 Keying Options and Rear Panel Mount Panel Cutouts
Micro-D Special Apps and MODs
Micro-D Mod Code 497 EMI Ground Spring
Improve EMI Performance with Mod Code 497 Ground Springs Today’s military and aerospace electronics systems require improved EMI protection. Micro-D connectors are widely used in EMI applications; however, the shell-to-shell resistance of a mated pair can vary, resulting in inconsistent levels of shielding effectiveness. Ground springs assure consistent shell-to-shell resistance for improved EMI protection.
Ground Spring and EMI Shielding Effectiveness– A gold-plated stainless steel ground spring on the pin connector mating face offers substantial improvement in EMI protection. The graphs compare identical connectors tested with and without ground springs.
100 90 80 70 60 50 40 30 20 10 0 1.00E+03
1.00E+04
1.00E+05
1.00E+06
1.00E+07
EMI Performance without Ground Spring
1.00E+08
1.00E+09
SHEILDING EFFECTIVENESS (dB)
K
SHEILDING EFFECTIVENESS (dB)
EMI Performance with Ground Spring
FREQUENCY (Hz)
100 90 80 70 60 50 40 30 20 10 0 1.00E+03
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
FREQUENCY (Hz)
How To Order Micro-D Connectors With Mod 497 Springs Step 1: Find a Standard Micro-D Part Number Ground springs are available on all standard Micro-D plug connectors with solder cups, insulated wire, or printed circuit board. Ground spring usage is limited to pin connectors with electroless-nickel plated shells, or gold plated shells.
Example: MWDM2L-100P-6K7-18B 1. Plugs only (pin connectors) 2. Nickel and gold plated aluminum shells only
Step 2: Add the Mod Code to the Part Number
Example: MWDM2L-100P-6K7-18B-497
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Rev 0917
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-4 E-Mail:
[email protected]
Micro-D Special Apps and MODs
Micro-D Mod Code 497 EMI Ground Spring Installation Procedure
Step 1
Locate weld site on spring, indicated by a deformation in ring and a doubling of coils. Note: When fitting spring to connector ensure that weld sits on the flat faces of the Micro–D™ connector as illustrated in Step 2. Step 2
Place spring into one end of groove on connector plug and stretch spring to sit in channel. Ensure that weld sits on flat face of plug. Complete fitting spring around channel while maintaining position of weld on flat faces of plug. Weld position should be located on top or bottom flat face
Step 3
Ensure that the spring is properly seated in the channel by using a plastic mechanical pencil or similar item to rotate/ manipulate the spring into position. Note: Perform this manipulation carefully and incrementally. Do not simply slide the mechanical pencil/tool across the spring as this can unevenly distribute more of the spring into one area of the slot, resulting in deformation of spring material and lead to binding/crashing when mating connectors.
K
spring channel
Profile View Incorrectly seated spring (pre–manipulation)
Correctly seated spring (post-manipulation)
Step 4
Check for proper fitting and for binding points in mating process. Three mating cycles are recommended to ensure a proper fit. Note: Weld on spring may appear discolored, this is normal. © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-5 E-Mail:
[email protected]
Micro-D Special Apps and MODs
Micro-D Mod Code 428 for +200° C. Operating Temperature
Upgrade to 200° Celcius with Mod Code 428 High Temperature Epoxy The search for oil and gas has led to deeper reservoirs where extreme temperatures and pressures test the limits of electronics design. Oil well logging instruments must be able to withstand temperatures beyond the limits of standard connectors. Micro-D connectors are made from temperature-resistant materials. The Liquid Crystal Polymer (LCP) glass-filled thermoplastic insulators easily withstand 400° F. The Fluorosilicone seals, TwistPin contacts and aluminum shells also are rated for continuous exposure to 400° F. The epoxy potting compound is the only component not rated for high temperature. Mod Code 428 upgrades the standard epoxy with a special 600° F. epoxy.
Potting a Micro-D with Epoxy-Filled Syringe Nickel Plated Aluminum Shell
TwistPin Contact
Special Hi-Temp Epoxy
200° C. Fluoropolymer Wire
K
Nickel Plated Aluminum Shell Socket Contact
LCP Insulator
Special Hi-Temp Epoxy
Flourosilicone Interfacial Seal
Plug
200° C. Fluoropolymer Wire Receptacle
LCP Insulator
How To Order Micro-D Connectors With Mod 428 Hi Temp Step 1: Find a Standard Micro-D part Number Mod 428 is available on all standard metal shell Micro-D connectors, including solder cup, pre-wired and printed circuit board versions. Not available on plastic Micro-D or M83513 connectors.
Example: MWDM2L-37PSL 1. Metal shell only 2. Nickel-plated aluminum or stainless steel shells only.
Step 2: Add the Mod Code to the Part Number
Example: MWDM2L-37PSL-428
Application Notes
1. Shell Material & Finish:
Electroless nickel plated aluminum is commonly used for high temperature connectors. Cadmium plated aluminum is not recommended for temperatures exceeding 175° C. because of discoloration and breakdown of the chromate seal applied to the cadmium. Stainless steel shells provide the best resistance to temperature and corrosive environments, but at the expense of weight and cost.
2. Potting Compound:
200° C Rated Epoxy
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-6 E-Mail:
[email protected]
Micro-D Special Apps and MODs
Micro-D Mod Code 429 Space Grade
Save Time and Cost with Mod Code 429 Space Grade Micro-D’s Detail of the Atmospheric Infrared Sounder Instrument (AIRS) with Glenair Micro-D Cables and Connectors
Micro-D TwistPin connectors are a good choice for all types of orbital and deep space projects. Glenair’s Mod Code 429 upgrades Micro-D’s to NASA requirements without the need for a customer Statement of Work or Specification Control Drawing. This section explains Glenair Mod Code 429 ordering, and provides valuable information on outgassing and other space flight topics. How To Order Space Grade Micro-D’s
Photo courtesy JPL
Six things you should know about Micro-D connectors for space flight
1
Outgassing: What is outgassing,
why is it important, and how does it affect connector selection? Is special processing required to meet outgassing requirements?
2
Screening: What is NASA screening and what level of screening is required?
3 4
Magnetic permeability: Are nonmagnetic connectors required?
Step 1: Find a Standard Micro-D Part Number Electroless nickel plated shells and Tefzel® wire are preferred for space flight. Cadmium plating is prohibited. Step 2: Select a NASA Screening Level The term “Screening Level” refers to the final inspection procedure. Level 1 for mission-critical highest reliability Level 2 for high reliability Level 3 for standard reliability Step 3: Outgassing Processing A detailed explanation of outgassing is on the following pages. The interfacial seal on Micro-D receptacles does not meet NASA outgassing requirements unless it is baked or thermal vacuum outgassed. Some customers specify deleting the seal, some opt for a bakeout, and some customers specify thermal vacuum outgassing. Both the bakeout and thermal vacuum outgassing are extra cost. Step 4: Select the Mod Code 429 that Matches the Desired Level of Screening and Outgassing Use the following table to choose the right modification code. Add the mod code to the connector part number. Example: MWDM2L-37P-6J5-18L-429C
Cryogenic exposure: Are Micro-D connectors suitable for -200° C. exposure?
5
Materials: Micro-D connectors offer a variety of materials and plating finishes. Which ones are recommended for space flight?
6
Wire Corrosion: M22759/33 irradiated Tefzel® wire is preferred for space applications. What about corrosion problems caused by this wire?
© 2013 Glenair, Inc.
Special Screening Only
Special Screening Plus Outgassing Processing
NASA Screening Level
Interfacial Seal is Installed
Interfacial Seal is Deleted
48 Hour Oven Bake 175° C.
Thermal Vacuum Outgassing 24 hrs. 125° C.
Level 1 Highest Reliability
Mod Code 429B
Mod Code 429F
Mod Code 429J
Mod Code 429C
Level 2 High Reliability
Mod Code 429
Mod Code 429D
Mod Code 429K
Mod Code 429A
Level 3 Standard Reliability
(Use standard part number)
Mod Code 432
Mod Code 186
Mod Code 186M
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-7 E-Mail:
[email protected]
K
Micro-D Special Apps and MODs
Micro-D Mod Code 429 Space Grade
1
Outgassing: What is outgassing
and how does it affect connector selection? Is special processing required to meet outgassing requirements?
What is outgassing? Plastic and rubber materials give off gaseous molecules. For example, the smell inside a new car is caused by polymer outgassing. Heat and vacuum increase the rate of diffusion. In a spacecraft the gases coming off polymers can contaminate optical surfaces and instruments. The result is degraded performance.
K
How is outgassing measured? The space industry has adopted a standardized test procedure, ASTM E 595, to evaluate out-gassing properties of polymers. Small samples of material are heated to 125° C. at a vacuum of 5 X 10-5 torr for 24 hours. Then the sample is weighed to calculate the Total Mass Loss (TML). The TML cannot exceed 1.00% of the total initial mass. During the test, outgassed matter condenses on a cooled collector plate. The quantity of outgassed matter is caluclated to determine the Collected Volatile Condensable Material (CVCM). The CVCM cannot exceed 0.10% of the original specimen mass.
MIL-DTL-83513 specifies that Micro-D connectors must meet outgassing requirements, but the interfacial seal exceeds the limit. How can this be? The mil spec allows the TML and CVCM to be calculated based on the total mass of the nonmetallic components. The interfacial seal can exceed outgassing limits as long as the insulator and potting compound are well below maximum outgassing limits. Is special outgassing necessary? It depends on the customer. Some programs specify that all connectors be oven baked or thermal vacuum outgassed. For example, NASA GSFC programs typically require that the interfacial seals are deleted,along with level I screening and thermal vacuum outgassing processing.
Outgassing At-a-Glance
1 2
Fluorosilicone Interfacial Seals
exceed NASA outgassing limits.
NASA recommends removing
the seal or performing a bakeout.
3
An inexpensive oven bakeout
has better results than the more costly thermal vacuum outgassing.
4
Glenair Mod 429 codes provide
an easy ordering solution, whatever the outgassing option.
Why pay extra for bakeout or thermal vacuum outgassing? If the interfacial seal is not removed, NASA recommends a bakeout process. Table 1 demonstrates that a simple oven bake is sufficient to reduce volatile matter. The choice is up to the customer. Whatever level of processing, the Glenair mod 429 codes make ordering easy.
Table 1: Outgassing Properties Of Micro-D Connectors Material
Brand Name
% Total Mass Loss (TML)
% Collected Volatile Condensable Material (CVCM)
Test Report
Liquid Crystal Polymer
Vectra C-130
0.03
0.00
NASA Test #GSC17478
Epoxy
Hysol C94215
0.48
0.01
Glenair Test
Interfacial Seal “as received”
Fluorosilicone
(none)
0.99
0.13
Glenair Test
Interfacial Seal with Oven Bakeout 8 hrs. 400° F.
Fluorosilicone
(none)
0.03
0.01
Glenair Test
Interfacial Seal with Thermal Vacuum Bakeout24 hrs. 125° C.
Fluorosilicone
(none)
0.08
0.02
Glenair Test
Tefzel®
Tefzel®
0.22
0.01
NASA Test #GSC19998
Component Thermoplastic Insulators and PCB Trays Potting Compound
Wire
© 2013 Glenair, Inc.
®
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-8 E-Mail:
[email protected]
Micro-D Special Apps and MODs
Micro-D Mod Code 429 Space Grade
2
screening: What level of screening is required?
What is NASA screening? NASA specification EEE-INST-002 (see figure 2) provides instructions on selecting, screening and qualifying parts for use on NASA GSFC space flight projects. Table 2C in the NASA spec contains specific inspection instructions for MIL-DTL-83513 connectors. These screening requirements exceed the standard mil spec inspection levels. What screening level is required? NASA defines three levels of screening: level 1 for highest reliability, level 2 for high reliability, and level 3 for standard reliability. Level 3 equates to standard M83513 Group A and B lot acceptance testing, and levels 1 and 2 call for additional testing. Why does Glenair perform extra screening tests? Glenair has test procedures that go beyond the letter of the NASA spec. Meeting NASA requirements means not only inspecting per EEE-INST-002, but also building parts in accordance with NASA Technical Standard NASASTD-8739.4 “Crimping, Interconnecting Cables, Harnesses, and Wiring”. Glenair fully meets these requirements and has obtained NASA certification. Our extra inspection steps reflect the fact that pre-wired connectors not only require best practices on the assembly floor, but also require thorough final electrical and mechanical testing. What about qualification requirements? Qualification is not required if the manufacturer has performed qualification testing per MIL-DTL-83513. Qualification by similarity is usually invoked for those Micro-D’s not specifically covered by the mil spec. © 2013 Glenair, Inc.
Due to the dynamic nature of this document, users are advised to check the http://nepp.nasa.gov website prior to every usage to obtain the latest document revision. 1.0
PURPOSE
The purpose of this document is to establish baseline criteria for selection, screening, qualification, and derating of EEE parts for use on NASA GSFC space flight projects. This document shall provide a mechanism to assure that appropriate parts are used in the fabrication of space hardware that will meet mission reliability objectives within budget constraints. 2.0
SCOPE
This document provides instructions for meeting three reliability levels of EEE parts requirements (see 6.0) based on mission needs. The terms “grade” and “level” are considered synonymous; i.e., a grade 1 part is consistent with reliability level 1. Levels of part reliability confidence decrease by reliability level, with level 1 being the highest reliability and level 3 the lowest. A reliability level 1 part has the highest level of manufacturing control and testing per military or DSCC specifications. Level 2 parts have reduced manufacturing control and testing. Level 3 Parts have no guaranteed reliability controls in the manufacturing process and no standardized testing requirements. The reliability of level 3 parts can vary significantly with each manufacturer, part type and LDC due to unreported and frequent changes in design, construction and materials. GSFC projects and contractors shall incorporate this guideline into their Project EEE Parts Program. 3.0
DEFINITIONS
Screening. Screening tests are intended to remove nonconforming parts (parts with random defects that are likely to result in early failures, known as infant mortality) from an otherwise acceptable lot and thus increase confidence in the reliability of the parts selected for use.
Figure 1: Excerpt from NASA EEE-INST-002 Table 2: NASA Screening Requirements Inspection/ Test
NASA Level 1
NASA Level 2
Visual Inspection (3X magnification)
100%
100%
Mechanical
2 pcs.
2 pcs.
Voltage (DWV)
100%
2 pcs.
Insulation Resistance
2 pcs.
2 pcs.
Temperature Cycling
2 pcs.
2 pcs
Low Level Contact Resistance
2 pcs.
2 pcs.
Mating Force
2 pcs.
N/A
Solderability/Resistance to Soldering Heat
2 pcs.
N/A
Notes: 1. NASA screening requirements from Table 2C of EEE-INST-002. 2. Prior to NASA screening, parts are subjected to 100% DWV insulation resistance and continuity testing
High Performance Micro-D Connectors and Cables
Rev. 5.18.15
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-9 E-Mail:
[email protected]
K
Micro-D Special Apps and MODs
Micro-D Mod Code 429 Space Grade
3
Magnetic permeability:
Are nonmagnetic connectors required?
Spacecraft designers generally avoid the use of ferromagnetic materials, which can become magnetized and can interfere with sensitive instruments. Micro-D connectors do not contain ferromagnetic materials, so magnetic permeability is not a concern. MILDTL-83513 requires a maximum permeability of 2 mu. Glenair hermetic Micro-D connectors are made from Kovar® alloy, a highly magnetic material. The stainless steel e-rings commonly used for Micro-D jackscrew attachment also exceed the 2 mu requirement.
4
Cryogenic exposure:
Are Micro-D connectors suitable for -200° C. ?
K
Micro-D connectors are rated to -55° C. Glenair has not performed testing below this temperature. EEE-INST-002 states “...experience has proven it is possible for (non-certified) connector types to be used successfully at cryogenic temperatures. It is recommended that connector samples should be subjected to five cycles of cryogenic temperature...(followed by examination for cracks and DWV)”.
5
Materials: Micro-D connectors offer a variety of materials and plating finishes. Which ones are recommended for space flight? NASA recommends electroless nickel plated connector shells and crosslinked high strength ETFE (Tefzel®) wire. Cadmium plating is prohibited because it sublimates in a vacuum environment. Gold plating is acceptable but rarely used on Micro-D connector shells. NASA recommends electroless nickel plated connector shells and crosslinked high
© 2013 Glenair, Inc.
strength ETFE (Tefzel®) wire. Cadmium plating is prohibited because it sublimates in a vacuum environment. Gold plating is acceptable but rarely used on Micro-D connector shells.
6
Wire Corrosion: M22759/33 irradiated Tefzel® wire is preferred for space applications. What about corrosion problems caused by this wire?
Does M22759/33 wire have an outgassing problem?
Irradiated Tefzel® wire is known to cause tarnishing and corrosion of metal parts in close proximity, usually in sealed bags. Both MIL-DTL-83513 and NASA EEE-INST-002 contain cautionary notes regarding this problem. Wire manufacturers have not been able to eliminate this problem, which might be caused by the insulation extrusion process. This corrosion problem is referred to as “wire outgassing”, which has led to confusion over the term outgassing. This problem has nothing to do with the ability of the wire to meet the TML and CVCM outgassing requirements of ASTM E595. M22759/33 irradiated Tefzel wire continues to be the wire of choice for spacecraft. This wire complies with outgassing requirements.
The corrosion problem
Glenair has adopted a new packaging standard to protect the connector from
High Performance Micro-D Connectors and Cables
“Users are advised that some ETFE insulations are known to outgas trace amounts of corrosive fluorine over time. When this wire is used with nickel coated metal shell connectors and stored in sealed plastic or ESD bags, trapped fluorine can attack exposed metal shells and
Micro-D connectors supplied as prewired assemblies should not be stored in sealed bags for extended periods. NASA recommends that parts be inspected for shell discoloration (“a dull “gun metal” appearance) and contact corrosion (“a flat black appearance”). Connectors with corroded contacts should be scrapped.
New Unit Pack Minimizes Corrosion
Figure 2 Fluoropolymer-wrapped Connector and Perforated Bag
contacts.” Excerpt from Note 9, Table 2, NASA EEE-INST-002 tarnishing or corrosion. Figure 2 shows Glenair’s standard packaging for metal shell connectors supplied with M22759/33 wire. The connector is wrapped in Fluoropolymer tape and placed in a ventilated sulpherfree paper envelope.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com K-10 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
Section L MIL-DTL-83513 Micro-D Connectors Product Selection Guide Glenair’s Complete Micro-D Product Line includes all M83513 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions. Glenair M83513 connectors always use TwistPin Contacts for high performance, made in U.S.A.
Metal Shell M83513/01 & 02 Page L-4
M83513/01, /02, /06, /07 Solder Cup Metal or Plastic Shell These connectors feature gold-plated solder cup contacts for termination to #26 AWG or smaller wire.
Plastic Shell M83513/06 & 07 Page L-7
M83513/03, /04, /08, /09 Pre-Wired Pigtails, Metal or Plastic Shell These crimped, epoxy-potted assemblies are available with insulated 19 strand #26 AWG wire or with #25 AWG uninsulated single strand wire. Insulated wire options include wire type, color code and length. Uninsulated wires are gold-plated or SnPb 60/40 solder dipped.
Metal Shell M83513/03 & 04 Page L-5 Plastic Shell M83513/08 & 09 Page L-8 M83513/10 to 15 Right Angle Narrow PCB Page L-10 M83513/16 to 21 Right Angle Wide Style PCB Page L-14 M83513/22 to 27 Vertical Mount PCB Page L-18 M83513/28 Thru 33 Compact Vertical PCB Page L-22
M83513/22 Thru 33 Vertical Mount Printed Circuit Board These recent additions to the mil spec feature .075 inch by .100 inch PC terminal spacing. The plastic tray does not extend beyond the envelope of the metal connector shell.
M83513/05 Jackscrews and Jackposts These hardware kits contain stainless steel jackscrews in two lengths. Choose slot head or hex head. Jackscrews attach with e-rings. Jackposts also are stainless steel.
B C D E F G H J K L M N P Q INDEX
M83513/05 Hardware Kits Page L-26
M83513/10 Thru 21 Right Angle .100" Pitch Printed Circuit Board Connectors Select vertical or right angle mounting. PC tails are .020 inch (0.50 mm.) diameter on a .100 inch (2.54 mm.) offset grid. Jackposts and threaded inserts are available.
A
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-1 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513 Micro-D Connectors
A MIL-DTL-83513 At-A-Glance B
INCH-POUND MIL-DTL-83513E 29 May 2002 SUPERSEDING MIL-PRF-83513D 22 April 1997
C D E F G H J K L M N P Q
CATION DETAIL SPECIFI TANGULAR, ELECTRICAL, REC SHELL, S, TOR NEC CON E, POLARIZED MICROMINIATUR CIFICATION FOR SPE L ERA GEN ents use by all Departm is approved for This specification of the Department of Defense. and Agencies 1. SCOPE specification 1.1 Scope. This
ectors. e, rectangular conn shell, microminiatur covers polarized
1.2 Classification. 1.2.1 Class
) (shell and insulator P - All plastic ) l (plastic insulator M - Metal shel
1.2.2 Type
e) acts (nonremovabl e) I - Crimp cont acts (nonremovabl II - S older cont NTS DOCUME this standard. ions 3 and 4 of 2. APPLICABLE nded for specified in sect in this section are ions of this standard or recomme of documents listed r sect the completeness re ensu to e 2.1 General. The include documents cited in othe t has been mad ments cited in not . While every effor t all specified requirements docu This section does or as examples mee on t mati mus infor l they additiona are cautioned that not they are listed. s user t men this list, docu , whether or of this standard sections 3 and 4 s, and documents. 2.2 Government ifications, standard ified, the The following spec ss otherwise spec and handbooks. ified herein. Unle x of ions, standards, t to the extent spec of Defense Inde 2.2.1 Specificat ent men artm docu Dep this a part of itation (see 6.2). in the issue of the solic the listed in e handbooks form thos cited nt thereto, documents are ) and suppleme issues of these Standards (DODISS nent data which Specifications and tions) and any perti Supply Center , additions, dele nse (recommendations should be addressed to: Defe ts men 00 by using com l Beneficia s, OH 43216-50 this document g mbu ovin Colu et, impr in Stre at the end d may be of use 3990 East Broa 1426) appearing N: DSCC-VAI, osal (DD Form Columbus, ATT t Improvement Prop men Docu n the Standardizatio by letter. t or of this documen FSC 5935 se; distribution is
ic relea AMSC N/A Approved for publ STATEMENT A. DISTRIBUTION
unlimited.
What is the difference between a Glenair COTS Micro-D and a Glenair Mil Spec Micro-D? Which is less expensive? All Glenair Micro-D's, whether mil spec or COTS, are built with the same components and meet identical requirements. A COTS Micro-D is not a lower cost version of a mil spec part. COTS versions offer more options than the mil spec versions. Which is more readily available: Mil Spec or COTS? All M83513 aluminum shell connectors are in stock. All standard COTS versions are also stocked.
INDEX
What is the difference between a Glenair Mil Spec connector and another brand? MIL-DTL-83513 allows the use of low-cost stamped contacts; however, the Glenair Micro-D connector features the high performanceTwistPin contact system. Glenair M83513 connectors are 100% Made in USA. Glenair's industry-leading Micro-D capacity and capabilities offer quick worldwide access to the full range of QPL items. © 2013 Glenair, Inc.
About The Mil Spec The United States Department of Defense, Defense Logistics Agency, Defense Supply Center, Columbus, Ohio (DSCC, pronounced "Dessy"), maintains a vast library of military specifications covering all kinds of components used in defense equipment. These mil specs simplify system design and procurement, because mil spec parts do not require costly testing for suitability. Easy multiple sourcing is another key advantage of a mil spec part. MIL-DTL-83513 is a detail spec controlling dimensions, materials, performance and testing. This spec covers plastic and metal shell Micro-D connectors. The QPL At-A-Glance Manufacturers are required to perform a series of mechanical, electrical and environmental tests in order to be eligible for listing as an approved supplier. When DSCC approval is granted, the manufacturer is added to the Qualified Products List (QPL). Glenair is QPL approved for all M83513 variations. The "Slash Sheets" At-A-Glance In addition to the general specification, MIL-DTL-83513 contains a total of 33 Detail Specification Sheets, nicknamed "slash sheets" because a forward slash is used in the numbering system. How to get a copy of the spec DSCC specs are available for download. The documents include: MIL-DTL-83513 Detail Specification (the general spec) MIL-DTL-83513 Slash Sheets (33 individual specs) These specs can be found at: http://www.dscc.dla.mil/Programs/MilSpec/DocSearch.asp The QPL can be found at: http://www.dscc.dla.mil/programs/qmlqpl/default.asp Glenair CAGE Codes A CAGE (Commercial And Government Entity) Code is a five position code that identifies companies doing or wishing to do business with the Federal Government. Glenair uses two CAGE codes to identify M83513 products: 06324, Glenair, Glendale , California 0CA77, Glenair Microway Division, Lincolnwood Illinois.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-2 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513 Micro-D Connectors
MIL-DTL-83513 contact arrangements (face view pin connector) 1
2
6
3
7
4
8
5
1
9
9 Contacts A
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9 10 11
1
2
3
4
5
6
7
8
9 10 11 12 13
9 10 11 12 13 14 15
12 13 14 15 16 17 18 19 20 21
14 15 16 17 18 19 20 21 22 23 24 25
15 Contacts B
21 Contacts C
25 Contacts D 1
2
3
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
31 Contacts D 4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 41 50 51 1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
37 Contacts F
51 Contacts G
100 Contacts H
Aluminum alloy 6061 in accordance with SAE-AMS-QQ-A-250/11 Plating Code C: Cadmium with yellow chromate conversion coating in accordance with SAE-AMS-QQ-P-416, Type II, Class 3 Plating Code N: Electroless nickel in accordance with SAE-AMS-26074, Class 3 Plating Code P: Stainless steel, 300 series, passivated in accordance with SAE-AMS-QQ-P-35 Plating Code A: Pure electrodeposited aluminum in accordance with MIL-DTL-83488, type II Plating Code K: Zinc nickel in accordance with ASTM B841 over a suitable underplate Plating Code T: Nickel fluorocarbon polymer, high phosphate nickel with flourocarbon polymer additive over a suitable underplate
Connector Shell, Plastic Liquid crystal polymer, 30% glass-filled or ployphenyl sulfide, 40% flass -filled, in accordance with MIL-M-24519 Insulator
Liquid crystal polymer, 30% glass-filled or ployphenyl sulfide, 40% flass -filled, in accordance with MIL-M-24519
Terminal Block, PCB
Liquid crystal polymer, 30% glass-filled or ployphenyl sulfide, 40% flass -filled, in accordance with MIL-M-24519
Interfacial Seal
Fluorosilicone rubber in accordance with A-A-59588
Pin Contact (TwistPin)
Beryllium copper, gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 Microinches minimum) Code C, over nickel underplate in accordance with SAE-AMS-QQ-N-290, Class 2 (30 microinches minimum)
Socket Contact
Phos bronze in accordance with ASTM 139 gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 Microinches minimum) Code C, over nickel underplate in accordance with SAE-AMS-QQ-N-290, Class 2 (30 microinches minimum)
Encapsulant (Potting)
Epoxy resin, hysol EE4215/HD3561
Jackscrews, Jackposts
Stainless steel, passivated in accordance with SAE-AMS-2700
Pigtail Wire, Insulated Hookup
MIL-W-22759/11: 19 strand silver-coated copper wire, extruded ptfe insulation, 600 volts rms, 200° C. MIL-W-22759/33: 19 strand high-strength silver-coated copper alloy wire, crosslinked modified ETFE insulation, 600 volts rms, 200° C.
Pigtail Wire, Uninsulated
Wire type 07 and 08: solid copper wire in accordance with A-A-59551, tin/lead plated wire type 05 and 06: solid copper wire in accordance with A-A-59551, gold-plated
© 2013 Glenair, Inc.
U.S. CAGE Code 06324
D F G H J K L M
Mil-DTL-83513 Performance Specifications 3 AMP 600 VAC Sea Level, 150 VAC 70,000 Feet 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +125° C. 50 g. 20 g. Meets NASA Outgassing Requirements (10 Ounces Maximum) X (# Of Contacts) 48 Hours Aluminum Shell With Cadmium Plating 500 Mating Cycles Minimum
High Performance Micro-D Connectors and Cables
C
N P Q INDEX
Current Rating Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Low Level Contact Resistance Magnetic Permeability Operating Temperature Shock Vibration Outgassing Mating Force Salt Spray Durability
B
E
MIL-DTL-83513 Materials and Finishes (Specific to Glenair)
Connector Shell, Metal
A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-3 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/01 & /02 Micro-D Solder Cup Terminated, Metal Shell Connector Metal Shell Solder Cup M83513 Connectors feature gold-plated TwistPin non-removable contacts for solder termination to AWG #26 or smaller wire.
A B C D E F
M83513/01 & /02 Solder Cup Part Numbers Layout
Config.
9P 9S 15P 15S 21P 21S 25P 25S
Plug Receptacle Plug Receptacle Plug Receptacle Plug Receptacle
M83513/01 & /02 Solder Cup Part Numbers
Electroless Cadmium Passivated Nickel Plated Plated Stainless Steel Aluminum Shell Aluminum Shell Shell
Layout
Config.
M83513/01-AN M83513/02-AN M83513/01-BN M83513/02-BN M83513/01-CN M83513/02-CN M83513/01-DN M83513/02-DN
31P 31S 37P 37S 51P 51S 100P 100S
Plug Receptacle Plug Receptacle Plug Receptacle Plug Receptacle
M83513/01-AC M83513/02-AC M83513/01-BC M83513/02-BC M83513/01-CC M83513/02-CC M83513/01-DC M83513/02-DC
M83513/01-AP M83513/02-AP M83513/01-BP M83513/02-BP M83513/01-CP M83513/02-CP M83513/01-DP M83513/02-DP
G A B C E
M N P Q
M83513/01-EN M83513/02-EN M83513/01-FN M83513/02-FN M83513/01-GN M83513/02-GN M83513/01-HN M83513/02-HN
M83513/01-EP M83513/02-EP M83513/01-FP M83513/02-FP M83513/01-GP M83513/02-GP M83513/01-HP M83513/02-HP
M83513/01-EC M83513/02-EC M83513/01-FC M83513/02-FC M83513/01-GC M83513/02-GC M83513/01-HC M83513/02-HC
J
G 9-51 CONTACTS .096/.088 (2.43/2.23) DIA. 100 CONTACTS .150/.145 (8.81/3.68) DIA. A Max.
Layout
INDEX
9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
.110 (2.79) MAX
.093 ± .005 (2.36 ± 0.13)
F
D
K L
Passivated Stainless Steel Shell
Dimensions
H J
Electroless Cadmium Nickel Plated Plated Aluminum Shell Aluminum Shell
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
19.94
© 2013 Glenair, Inc.
B
C Max.
In .
mm.
± .003
± 0.08
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
In.
mm.
.333 8.46 .400 10.16 .483 12.27 .551 14.00 .633 16.08 .701 17.81 .733 18.62 .801 20.35 .883 22.43 .951 24.16 1.033 26.24 1.101 27.96 .983 24.97 1.051 26.70 1.383 35.13 1.451 36.86
.200 (5.08) MAX
H D Max.
E Max.
In.
mm.
In.
mm.
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 10.01 10.01
High Performance Micro-D Connectors and Cables
F
G Max.
In.
mm.
± .003
± 0.08
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
In.
mm.
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90
H Max. In.
J Max.
mm.
.400 10.16 .400 10.16 .550 13.97 .550 13.97 .700 17.78 .700 17.78 .800 20.32 .800 20.32 .950 24.13 .950 24.13 1.100 27.94 1.100 27.94 1.050 26.67 1.050 26.67 1.442 36.63 1.442 36.63
U.S. CAGE Code 06324
In.
mm.
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .360 .360
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 9.14 9.14
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-4 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/03 & /04 Micro-D Pre-Wired Crimp Terminated, Metal Shell Connector Micro-D Pre-Wired Pigtails These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. Specify aluminum shells for best availability. 100% tested and backpotted, ready for use.
A B
Choose the Wire Type To Fit Your Application For lightest weight and smallest diameter, select M22759/33 space grade insulated wire.
C
How To Order MIL-DTL- 83513 Pre-Wired Metal Shell Micro-D Connectors m83513
Sample Part Number Base Part Number Slash Number
Shell Size
Wire Type
Shell Finish
/04
-b
09
n
M83513 /03 Pin Connector (Plug) /04 Socket Connector (Receptacle) A, B, C, D, E, F, G, H (See Table I) Codes A - H specify the shell size. The number of contacts is shown below for reference. A - 9 B - 15 C - 21 D - 25 E - 31 F - 37 G - 51 H - 100 M22759/11-26 Teflon®-Insulated Hookup Wire 01 - 18 Inches (457mm), White 02 - 36 Inches (914mm), White 03 - 18 Inches (457mm), 10 Color Repeating 04 - 36 Inches (914mm), 10 Color Repeating 13 - 72 Inches (1829mm), White 14 - 72 Inches (1829mm), 10 Color Repeating 25 AWG Single Strand Uninsulated Wire 05 - .500 Inch (12.7mm), Gold Plated 06 - 1.000 Inch (25.4mm), Gold Plated 07 - .500 Inch (12.7mm), Tin-Lead Plated(2) 08 - 1.000 Inch (25.4mm), Tin-Lead Plated(2) M22759/33-26 Irradiated Tefzel® Insulated Hookup Wire 09 - 18 Inches (457mm), White 10 - 36 Inches (914mm), White 11 - 18 Inches (457mm), 10 Color Repeating 12 - 36 Inches (914mm), 10 Color Repeating 15 - 72 Inches (1829mm), White 16 - 72 Inches (1829mm), 10 Color Repeating C - Cadmium N - Electroless Nickel P - Passivated SST A - Electrodeposited Aluminum K - Zinc Nickel T - Nickel Fluorocarbon Polymer
Notes
E F G H J K L M N P Q INDEX
1. Shell Material & Finish: Cadmium plating offers better corrosion resistance compared to nickel, but cad is not acceptable for space or RoHS applications. Electroless nickel plated aluminum is recommended for new design activity. Or, choose stainless steel shells for corrosive environments. 2. Tin-Plated Wire: Glenair M83513 connectors do not contain any components exceeding 97% tin. 3. M22759/33 Corrosion: The M83513 spec contains a cautionary note regarding M22759/33 wire. The wire insulation is known to cause corrosion to metal parts when stored in a sealed environment. This corrosion has been observed on M83513 connectors. Glenair has implemented a packaging procedure to minimize or eliminate this problem. Connectors are individually wrapped with teflon tape, and the unit pack is a perforated paper envelope. M22759/33 continues to be the preferred wire for space applications.
D
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-5 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/03 & /04 Micro-D Pre-Wired Crimp Terminated, Metal Shell Connector Table I: Dimensions
A
A B C
B C
E
J
D
F
F LENGTH +0.2/-0.0 (+5.08/-0.0)
G
J K L M N P
A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
B
C Max.
In.
mm.
In . mm. ± .003 ± 0.08
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
J
.093 ± .005 (2.36 ± 0.13)
H
G H
LENGTH FOR INSULATED STRANDED WIRE
9-51 CONTACTS .094/.088 (2.39/2.23) DIA. 100 CONTACTS .150/.145 (3.81/3.68) DIA.
D E
WIRE LENGTH +1.0/-0.0 (+25.4/-0.0)
D Max.
LENGTH FOR UNINSULATED WIRE
E Max.
In.
mm.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .394 .394
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 10.01 10.01
F
G Max.
In. mm. ± .003 ± 0.08 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.442 1.442
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.63 36.63
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .360 .360
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 9.14 9.14
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-6 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/06 & /07 Micro-D Solder Cup Terminated, Plastic Shell Connector Plastic Shell Solder Cup M83513 Connectors feature goldplated TwistPin non-removable contacts for solder termination to AWG #26 or smaller wire. These all-plastic connectors are more economical, lighter and smaller than metal shell versions.
Config. Plug Receptacle Plug Receptacle
Part Number M83513/06-A M83513/07-A M83513/06-B M83513/07-B
C
Part Numbers Config. Part Number Plug M83513/06-C Receptacle M83513/07-C Plug M83513/06-D Receptacle M83513/07-D
Layout 21P 21S 25P 25S
Layout 31P 31S 37P 37S 51P 51S
Config. Plug Receptacle Plug Receptacle Plug Receptacle
Part Number M83513/06-E M83513/07-E M83513/06-F M83513/07-F M83513/06-G M83513/07-G
.100/.088 (2.54/2.24)
E F
H
J
SOCKET CONNECTOR A Max. Layout
B In . mm. ± .003 ± 0.08
In.
mm.
9P 9S 15P 15S 21P 21S
.788 .788 .938 .938 1.088 1.080
20.02 20.02 23.83 23.83 27.64 27.64
.565 .565 .715 .715 .865 .865
25P 25S
1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
.965 .965 1.115 1.115 1.265 1.265 1.215 1.215
31P 31S 37P 37S 51P 51S
© 2013 Glenair, Inc.
G H
A B C
J K
J PIN CONNECTOR
.096/.088 (2.43/2.23) DIA.
C Max.
D Max.
E
G
D .200 (5.08) MAX
D F
Table I: Dimensions
.110 (2.79) MAX
B
E Max.
F Max.
G Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
14.35 14.35 18.16 18.16 21.97 21.97
.292 .380 .442 .530 .592 .680
7.42 9.65 11.23 13.46 15.04 17.27
.218 .218 .218 .218 .218 .218
5.54 5.54 5.54 5.54 5.54 5.54
.202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53
.408 .408 .558 .558 .708 .708
10.36 10.36 14.17 14.17 17.98 17.98
.173 .173 .173 .173 .173 .173
4.39 4.39 4.39 4.39 4.39 4.39
.134 .218 .134 .218 .134 .218
3.40 5.54 3.40 5.54 3.40 5.54
24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
.692 .780 .842 .930 .992 1.080 .942 1.030
17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53
.808 .808 .958 .958 1.108 1.108 1.058 1.058
20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87
.173 .173 .173 .173 .173 .173 .220 .220
4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59
.134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-7 E-Mail:
[email protected]
L M N P Q INDEX
Layout 9P 9S 15P 15S
A
Micro-D MIL-DTL-83513
MIL-DTL-83513/08 & /09 Micro-D Pre-Wired Crimp Terminated, Plastic Shell Connector Micro-D Pre-Wired Pigtails These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. 100% tested and backpotted, ready for use.
A B
Choose the Wire Type To Fit Your Application For lightest weight and smallest diameter, select M22759/33 space grade insulated wire.
C D E F
How To Order MIL-DTL-83513 Pre-Wired Plastic Shell Micro-D Connectors Base Part Number Slash Number
Shell Size
G H J
Wire Type
K L M N P
m83513/
Sample Part Number
09
-g
12
M83513 /08 Pin Connector (Plug) /09 Socket Connector (Receptacle) A, B, C, D, E, F, G (See Table I) Codes A - H specify the shell size. The number of contacts is shown below for reference. A - 9 B - 15 C - 21 D - 25 E - 31 F - 37 G - 51 M22759/11-26 Teflon®-Insulated Hookup Wire 01 - 18 Inches (457mm), White 02 - 36 Inches (914mm), White 03 - 18 Inches (457mm), 10 Color Repeating 04 - 36 Inches (914mm), 10 Color Repeating 13 - 72 Inches (1829mm), White 14 - 72 Inches (1829mm), 10 Color Repeating M22759/33-26 Irradiated Tefzel® Insulated Hookup Wire 09 - 18 Inches (457mm), White 10 - 36 Inches (914mm), White 11 - 18 Inches (457mm), 10 Color Repeating 12 - 36 Inches (914mm), 10 Color Repeating 15 - 72 Inches (1829mm), White 16 - 72 Inches (1829mm), 10 Color Repeating 25 AWG Single Strand Uninsulated Wire 05 - .500 Inch (12.7mm), Gold Plated 06 - 1.000 Inch (25.4mm), Gold Plated 07 - .500 Inch (12.7mm), Tin-Lead Plated(2) 08 - 1.000 Inch (25.4mm), Tin-Lead Plated(2)
Application Notes 1. Intermatability: M83513 plastic shell connectors are not intermateable with metal shell M83513 connectors. 2. Tin-Plated Wire: Glenair M83513 connectors do not contain any components exceeding 97% tin. 3. M22759/33 Corrosion: The M83513 spec contains a cautionary note regarding M22759/33 wire. The wire insulation is known to cause corrosion to metal parts when stored in a sealed environment. This corrosion has been observed on M83513 connectors. Glenair has implemented a packaging procedure to minimize or eliminate this problem. Connectors are individually wrapped with teflon tape, and the unit pack is a perforated paper envelope. M22759/33 continues to be the preferred wire for space applications.
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-8 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/08 & /09 Micro-D Pre-Wired Crimp Terminated, Plastic Shell Connector Table I: Dimensions
A
LENGTH FOR INSULATED STRANDED WIRE
H
J
D
PIN CONNECTOR .096/.088 (2.43/2.23) DIA .
H
J
.100/.088 (2.54/2.24)
B
LENGTH + 1.0/-0.0 (+25.4/-0.0)
C
LENGTH + 1.0/-0.0 (+25.4/-0.0)
E
SOCKET CONNECTOR
E
F
LENGTH FOR UNINSULATED WIRE
F
LENGTH + 0.2/-0.0 (+5.08/-0.0 )
G
H
J
H
SOCKET CONNECTOR G
LENGTH + 0.2/-0.0 (+5.08/-0.0)
J
H
J
K
PIN CONNECTOR A Max. Layout
B
In.
mm.
9P 9S 15P 15S 21P 21S
.788 .788 .938 .938 1.088 1.080
20.02 20.02 23.83 23.83 27.64 27.64
.565 .565 .715 .715 .865 .865
25P 25S
1.188 1.185 1.338 1.338 1.488 1.488 1.438 1.438
30.18 30.18 33.99 33.99 37.80 37.80 36.53 36.53
.965 .965 1.115 1.115 1.265 1.265 1.215 1.215
31P 31S 37P 37S 51P 51S
© 2013 Glenair, Inc.
C Max.
In . mm. ± .003 ± 0.08
D Max.
E Max.
F Max.
G Max.
H Max.
J Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
14.35 14.35 18.16 18.16 21.97 21.97
.292 .380 .442 .530 .592 .680
7.42 9.65 11.23 13.46 15.04 17.27
.218 .218 .218 .218 .218 .218
5.54 5.54 5.54 5.54 5.54 5.54
.202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53
.408 .408 .558 .558 .708 .708
10.36 10.36 14.17 14.17 17.98 17.98
.173 .173 .173 .173 .173 .173
4.39 4.39 4.39 4.39 4.39 4.39
.134 .218 .134 .218 .134 .218
3.40 5.54 3.40 5.54 3.40 5.54
24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86
.692 .780 .842 .930 .992 1.080 .942 1.030
17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16
.218 .218 .218 .218 .218 .218 .260 .260
5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60
.202 .185 .202 .185 .202 .185 .202 .185
5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70
.395 .375 .395 .375 .395 .375 .395 .375
10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53
.808 .808 .958 .958 1.108 1.108 1.058 1.058
20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87
.173 .173 .173 .173 .173 .173 .220 .220
4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59
.134 .218 .134 .218 .134 .218 .177 .260
3.40 5.54 3.40 5.54 3.40 5.54 4.50 6.60
High Performance Micro-D Connectors and Cables
D
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-9 E-Mail:
[email protected]
L M N P Q INDEX
A B C
Micro-D MIL-DTL-83513
MIL-DTL-83513/10 Thru /15 Micro-D CBR Condensed Right Angle PCB Terminated High Performance These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability.
A B
Solder-Dipped Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.
C D E F
How To Order MIL-DTL-83513 Right Angle Micro-D Connectors Base Part Number
Slash NumberShell Sizes
G H J K
PC Tail Length Shell Finish
Hardware Options
L M
m83513/
Sample Part Number
13-b
02
n
p
M83513 Plug (Pin Contacts) Receptacle (Socket Contacts) 10–A - 9 Contacts 13–A - 9 Contacts 10–B - 15 Contacts 13–B - 15 Contacts 10–C - 21 Contacts 13–C - 21 Contacts 10–D - 25 Contacts 13–D - 25 Contacts 10–E - 31 Contacts 13–E - 31 Contacts 10–F - 37 Contacts 13–F - 37 Contacts 11–G - 51 Contacts 14–G - 51 Contacts 12–H - 100 Contacts 15–H - 100 Contacts (See Table II) 01 – .109 Inch (2.77 mm) 02 – .140 Inch (3.56 mm) 03 – .172 Inch (4.37 mm) PC Tail Length ± .015 (0.38) C - Cadmium A - Electrodeposited Aluminum N - Electroless Nickel K - Zinc Nickel P - Passivated SST T - Nickel Fluorocarbon Polymer N - No Jackpost P - Jackposts Installed Sizes 9-51 T - Threaded Insert in Board Mount Hole (No Jackposts) W - Threaded Insert in Board Mount Hole and jackposts Installed Shell Size 100 (H) U - #4-40 Threaded Insert Y - #4-40 Threaded Insert & Jackpost See "Hardware Options" below for Illustrations (See Table I) Table I: Hardware Options
N
P
T or U
W or Y
N P Q
THRU HOLE
No Jackpost
THRU HOLE
2X THREADED INSERTS 2X THREADED INSERTS
Jackpost
Threaded Insert
2X THREADED INSERTS Jackpost, Threaded Insert
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-10 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/10 Thru /15 Micro-D CBR Condensed Right Angle PCB Terminated Table II: Dimensions
A
A B C D
C D
9-51 CONTACTS �#2-56 UNC-2B THREADS 100 CONTACTS �#4-40 UNC-2B THREADS
E
CONFIGURATION FOR 31-100 CONTACTS
CONFIGURATION FOR 9-25 CONTACTS F
F
H H J
G
G
J
K
G
H
2X MOUNTING HOLES L
PCB MOUNTING HOLES 9-51 CONTACTS .096 DIA. ± .003 (2.44 ± 0.08) 100 CONTACTS .125 DIA. ± .003 (3.18± 0.08) A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
In.
B
C Max.
In. mm. mm. In. ±.003 ± 0.08
.787 19.94 .565 19.94 .565 23.75 .715 23.75 .715 27.56 .865 27.56 .865 30.01 .965 30.01 .965 33.91 1.115 33.91 1.115 37.72 1.265 37.72 1.265 36.45 1.215 36.45 1.215 55.12 1.800 55.12 1.800
.787 .937 .937 1.087 1.087 1.187 1.187 1.337 1.337 1.487 1.487 1.435 1.435 2.175 2.175
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
D Max.
E Max.
mm.
In.
mm.
In.
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .351 .351 .394 .394
F
G Max.
J
H
J
K Max.
In. mm. mm. In. ±.003 ± 0.08
In. mm. In. mm. mm. ±.010 ±0.25 ±.010 ±0.25
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 8.92 8.92 10.01 10.01
10.80 10.80 10.80 10.80 10.80 10.80 10.80 10.80 13.34 13.34 13.34 13.34 16.76 16.76 25.65 25.65
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
High Performance Micro-D Connectors and Cables
.425 .425 .425 .425 .425 .425 .425 .425 .525 .525 .525 .525 .660 .660 1.010 1.010
.230 .230 .130 .130 .130 .130 .130 .130 .130 .130 .130 .130 .150 .150 .200 .200
5.84 5.84 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.81 3.81 5.08 5.08
.250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .300 .300 .400 .400
6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.62 7.62 10.16 10.16
U.S. CAGE Code 06324
L Max.
In.
mm.
In.
mm.
–– –– –– –– –– –– –– –– .450 .450 .450 .450 .450 .450 .590 .590
–– –– –– –– –– –– –– –– 11.43 11.43 11.43 11.43 11.43 11.43 14.99 14.99
–– –– –– –– –– –– –– –– 1.085 1.085 1.185 1.185 1.225 1.225 1.820 1.820
–– –– –– –– –– –– –– –– 27.56 27.56 30.10 30.10 31.12 31.12 46.23 46.23
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-11 E-Mail:
[email protected]
K L M N P Q INDEX
E
B
THREAD SIZES 9-51 CONTACTS #2-56 UNC 100 CONTACTS #4-40 UNC
Micro-D MIL-DTL-83513
A
MIL-DTL-83513/10 Thru /15 Micro-D CBR Condensed Right Angle PCB Terminated M83513/10 Thru /12 Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter
B
CONNECTOR FLANGE (FRONT) .020 (0.51)
C
1
.100 (2.54)
D F G
K
8
9
3 14
13
.100 (2.54)
6
4 15
17 16
8 7
18
9 19
.050 (1.27)TYP
.250 (6.35)
10
2
11 20
.020 (0.51)
21
3
1
.100 (2.54)
15
4 3
6 5
17
14
16
19 18
21 20
24
11 10
25
22
13 12
27 26
.050 (1.27)TYP 1.115 (28.32)
15 14
29 28
1
.020 (0.51)
30
3 2
.100 (2.54)
16
5 4
20
P
1 19
.100 (2.54) TYP
3 21
20 36
5 23
22 37
25
41
40
43
12 46
45 44
13
11 10
42
26 39
27 9
7
24 38
8
14 29
28 47
INDEX
.050 (1.27)TYP 1.215 (30.86)
24 23
22 21
.250 (6.35)
12 24
23
13
.020 (0.51)
25
CONNECTOR FLANGE
16
30 48
.050 (1.27)
17
31
8 26
25
11 10
28
13 12
15 14
29
27
31 30
17 16
33 32
.250 (6.35)
19 18
35 34
35
1
50
27
.275 (6.99)
.020 (0.51)
37 36
30
High Performance Micro-D Connectors and Cables
32 55
54 78
77
33 34 57 56
80 79
10 35
59 58
82 81
41 40
62
65
88
86 87
18 43
42
64 90
67
20
71
94 93
1.800 (45.72)
24
48
95
75
73
96
74 98
97
26 51
50
72
70
25
49
47
69
92
23 22
46
68
91
21
45 44
66
89
19
17 16
14
63
61
85
.400 (10.16) 15
39 38
60 84
83
12 37
36
CONNECTOR FLANGE
13
11
9 8
31
53
76
7 6
4 29
52 51
5
3
.100 (2.54) 2
34
32
CL
.025 (0.64)
28
18 33
49
9
.050 (1.27)TYP 1.265 (32.13)
.050 (1.27)TYP .100 (2.54) TYP
51 PIN M83513/11-G © 2013 Glenair, Inc.
9 20
11
37 PIN M83513/10-F
.300 (7.62)
15
7 6
22 21
31
.108 (2.74) 6
7 19
10
CL
.250 (6.35)
FRONT OF CONNECTOR FLANGE CL
4
5 18
.100 (2.54)
31 PIN M83513/10-E
2
8
.183 (4.65) 9
23
6
25 PIN M83513/10-D
CONNECTOR FLANGE
8 7
4
.050 (1.27)TYP .965 (24.51)
CL
.100 (2.54)
.020 (0.51)
15
CONNECTOR FLANGE
CL
.083 (2.11)
5
.100 (2.54) .158 (4.01)
17
8 14
15 PIN M83513/10-B
21 PIN M83513/10-C
1
6 13
.050 (1.27)TYP
.050 (1.27)TYP
.865 (21.97)
.100 (2.54)
12 11
9 PIN M83513/10-A
1
2
10
.250 (6.35)
7
.715 (18.16)
2
12
5
3
9
CL
.100 (2.54)
1
.100 (2.54)
5
4
.565 (14.35)
.083 (2.11)
M
Q
2
CONNECTOR FLANGE
L N
4 3
.100 (2.54)
H J
7
.108 (2.74)
.100 (2.54)TYP .250 (6.35)
2
6
E
.100 (2.54)
CL
.083 (2.11)
CONNECTOR FLANGE (FRONT)
CL
100 99
100 PIN M83513/12-H U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-12 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/10 Thru /15 Micro-D CBR Condensed Right Angle PCB Terminated M83513/13 THRU /15 connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter CONNECTOR FLANGE .100 (2.54)
CL
.083 (2.11) 5
.100 (2.54)
4
9
8
.108 (2.74)
.100 (2.54)TYP .250 (6.35) 2
7
3
7
11
8
5
7
3
17
19
4
18
.250 (6.35)
2 14
16
.050 (1.27)TYP
1 13
15
12 13
.100 (2.54)
.020 (0.51)
12
11 24
25
.100 (2.54) .158 (4.01) 15 16
13 14
30
11 12
29 31
9
8
10 27
28
6
24 25
4
7
22 23
19 20
19
1
.020 (0.51)
17
17 18
.100 (2.54) 37
16
51
14 31
32 50
12 29
30 49
46 28
48
43 45
47
.050 (1.27)TYP
8 9
10
6 7
41 42
44
5 25
26 40
4
.300 (7.62)
3
24 39
5 19
21
.100 (2.54) .275 (6.99)
23
26
24
14 33
34
.250 (6.35)
2
17 18
15 16
1
.020 (0.51)
14
11 12
31 32
9
7
10 29
5
8
30
3
6
28 27
25
.250 (6.35)
2
24
22 23
.020 (0.51)
20
19
36
51 SOCKET M83513/14-G High Performance Micro-D Connectors and Cables
21
49
51
99
70
41
66 92
39
64
37
35
88
60 86
87
6 33
34 59
61
31
57
84
29
55
82 83
2
30
56
27 28
.275 (6.99)
53 54
80 81
1
3 4
32
58
85
5
7 8
36
62
89
9 10
38 63
90 91
11 12
40 65
67
93
14
42
68
13
15
43
94 95
.400 (10.16)
16
44 69
96 97
18
46 71
98
17
45
47
72
74 100
20
48 73
75
19
52 78
79
76
M N P Q
77
1.800 (45.72)
100 SOCKET M83513/15-H U.S. CAGE Code 06324
K L
21
CONNECTOR FLANGE
CL
G J
1
4
26
F H
CONNECTOR FLANGE
.050 (1.27)TYP 1.265 (32.13)
22
50
20 37
13
.025 (0.64) 25
1
22 38
.050 (1.27)
2
23
16
.050 (1.27)TYP .100 (2.54) TYP
1.215 (30.86)
© 2013 Glenair, Inc.
7 20
3
37 SOCKET M83513/13-F
.108 (2.74) 27
15
35 36
18
FRONT OF CONNECTOR FLANGE
CL
11
9
4
CL
31 SOCKET M83513/13-E
13
6
.100 (2.54) .250 (6.35)
3
21 22
.050 (1.27)TYP 1.115 (28.32)
15
8
21
E
CONNECTOR FLANGE
.183 (4.65)
2
5
23
26
.100 (2.54)
10
D
25 SOCKET M83513/13-D
CONNECTOR FLANGE
CL
34
.020 (0.51)
9
.050 (1.27)TYP .965 (24.51)
21 SOCKET M83513/13-C
.100 (2.54) TYP
10
CL
.083 (2.11)
6
9 20
33
11
.050 (1.27)TYP
.100 (2.54)
.865 (21.97)
35
13
1
15 SOCKET M83513/13-B
10
18
3
9 SOCKET M83513/13-A CL
17
12
C
.250 (6.35)
2
.715 (18.16)
.083 (2.11)
.100 (2.54)
14
.050 (1.27)TYP
CONNECTOR FLANGE
21
6
15
6
4
.565 (14.35)
.100 (2.54)
.100 (2.54)
5
8
.100 (2.54)
1
B
INDEX
.020 (0.51)
CONNECTOR FLANGE (FRONT)
CL
A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-13 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/16 Thru /21 Micro-D BR Right Angle PCB Terminated Connector High Performance These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability.
A B
Solder-Dipped Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.
C D E F G H J K
How To Order MIL-DTL 83513 Right Angle PCB Micro-D Connectors Base Part Number
Slash NumberShell Sizes
PC Tail Length Shell Finish
Hardware Options
L M
m83513/
Sample Part Number
19-F
02
n
P
M83513 Plug (Pin Contacts) Receptacle (Socket Contacts 16–A - 9 Contacts 19–A - 9 Contacts 16–B - 15 Contacts 19–B - 15 Contacts 16–C - 21 Contacts 19–C - 21 Contacts 16–D - 25 Contacts 19–D - 25 Contacts 16–E - 31 Contacts 19–E - 31 Contacts 16–F - 37 Contacts 19–F - 37 Contacts 17–G - 51 Contacts 20–G - 51 Contacts 18–H - 100 Contacts 21–H - 100 Contacts 01 - .109 Inch (2.77 mm) 02 - .140 Inch (3.56 mm) 03 - .172 Inch (4.37 mm) PC Tail Length ± .015 (0.38) C - Cadmium A - Electrodeposited Aluminum N - Electroless Nickel K - Zinc Nickel P - Passivated SST T - Nickel Fluorocarbon Polymer N - No Jackpost P - Jackposts Installed Sizes 9-51 T - Threaded Insert in Board Mount Hole (No Jackposts) W - Threaded Insert in Board Mount Hole and jackposts Installed Shell Size 100 (H) U - #4-40 Threaded Insert Y - #4-40 Threaded Insert & Jackpost (See Table I) Table I: Hardware Options
N
P
T or U
W or Y
N P Q
THRU HOLE
No Jackpost
THRU HOLE
Jackpost
THREADED INSERT
Threaded Insert
THREADED INSERT
Jackpost, Threaded Insert
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-14 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/16 Thru /21 Micro-D BR Right Angle PCB Terminated Connector Table II: Dimensions
A
A F
B
B C
C
E
D
D
Tail Length
.020 (0.5) ± .002 (0.1) F
E
THREAD SIZES 9-51 CONTACTS #2-56 UNC 100 CONTACTS #4-40 UNC
H
F G
J K
G
H 2 X PCB MTNG HOLES 9-51 CONTACTS .096 ± .005 (2.43 ± 0.13) 100 CONTACTS .125 ± .005 (23.18 ± 0.13)
Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
B
C Max.
In.
mm.
In. mm. ±.005 ± 0.10
1.390 1.390 1.540 1.540 1.690 1.690 1.790 1.790 2.040 2.040 2.340 2.340 1.875 1.875 2.780 2.780
35.31 35.31 39.12 39.12 42.93 42.93 45.47 45.47 51.82 51.82 59.44 59.44 47.63 47.63 70.60 70.60
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
© 2013 Glenair, Inc.
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
D Max.
In.
mm.
In.
mm.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.185 .253 .185 .253 .185 .253 .185 .253 .185 .253 .185 .253 .228 .296 .271 .333
4.70 6.26 4.70 6.26 4.70 6.26 4.70 6.26 4.70 6.26 4.70 6.26 5.79 7.52 6.88 8.64
E Max. In.
mm.
F
G Max.
In. mm. ±.007 ± 0.18
.325 8.26 1.150 .325 8.26 1.150 .325 8.26 1.300 .325 8.26 1.300 .325 8.26 1.450 .325 8.26 1.450 .325 8.26 1.550 .325 8.26 1.550 .325 8.26 1.800 .325 8.26 1.800 .325 8.26 2.100 .325 8.26 2.100 .360 9.14 1.600 .360 9.14 1.600 .420 10.67 2.500 .420 10.67 2.500
High Performance Micro-D Connectors and Cables
29.21 29.21 33.02 33.02 36.83 36.83 39.37 39.37 45.72 45.72 53.34 53.34 40.64 40.64 63.50 63.50
H
J
K
K
In.
mm.
In. mm. In. mm. In. mm. ±.003 ±0.08 ±.015 ±0.38 ±.010 ±0.25
.465 .465 .465 .465 .465 .465 .465 .465 .465 .465 .465 .465 .565 .565 .765 .765
11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 11.81 14.35 14.35 19.43 19.43
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
U.S. CAGE Code 06324
.125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .225 .225
3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 5.72 5.72
.150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150 .150
3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-15 E-Mail:
[email protected]
L M N P Q INDEX
A Max.
J
Micro-D MIL-DTL-83513
A B C
MIL-DTL-83513/16 Thru /21 Micro-D BR Right Angle PCB Terminated Connector M83513/16 Thru /18 PCB Layouts – Pin Connectors
Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter .125 (3.18)
.050 (1.27)
.050 (1.27)
9 5
.150 (3.81)
.100 (2.54)
8 4
7 3
6 2
25 24 23 22 21 20 19 18 17 16 15 14 1
1.150 (29.21)
8
7
6
.100 (2.54)
.375 (9.53)
.100 (2.54)
.125 (3.18)
CONNECTOR FLANGE
6
5
4
.050 (1.27)
3
2
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
1
16 15 14 13 12 11 10
.150 (3.81) .100 (2.54)
.300 (7.62)
.100 (2.54)
9
8
7
6
.125 (3.18)
.125 (3.18)
.050 (1.27)
.100 (2.54)
7
.050 (1.27)
6
5
4
3
2
37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
1
.150 (3.81)
19 18 17 16 15 14 13 12 11 10 9
8
7
.100 (2.54)
.225 (5.72)
6
5
4
3
2
1
.150 (3.81)
1.450 (36.83)
K
1
.100 (2.54)
21 20 19 18 17 16 15 14 13 12 8
2
CONNECTOR FLANGE
.100 (2.54)
9
3
31 PIN M83513/16-E
CONNECTOR FLANGE
11 10
4
1.800 (45.72)
15 PIN M83513/16-B
.150 (3.81)
5
.150 (3.81)
1.300 (33.02)
H
2 1
.100 (.254)
15 14 13 12 11 10 9 7
3
CONNECTOR FLANGE
.050 (1.27)
8
4
25 PIN M83513/16-D
.100 (2.54)
.150 (3.81)
5
.175 (4.45) 1.550 (39.37)
9 PIN M83513/16-A
E
J
13 12 11 10 9
.150 (3.81)
.125 (3.18)
G
CONNECTOR FLANGE
.100 (2.54)
D F
.125 (3.18)
CONNECTOR FLANGE
2.100 (53.34)
21 PIN M83513/16-C
37 PIN M83513/16-F
.125 (3.18)
CONNECTOR FLANGE
L
.050 (1.27) .100 (2.54) 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36
.150 (3.81)
M
35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2X.100 (2.54)
.050 (1.27) 1.600 (40.64)
51 PIN M83513/17-G
N
.225 (5.72)
P
CONNECTOR FLANGE
.050 (1.27) .100 (2.54) 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52
.150 (1.27)
Q
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
3X.100 (2.54)
9
8
7
6
5
4
3
2
1
.050 (1.27)
INDEX
2.500 (63.5)
100 PIN M83513/18-H © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-16 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/16 Thru /21 Micro-D BR Right Angle PCB Terminated Connector M83513/19 Thru /21 PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter .125 (3.18)
.125 (3.18)
CONNECTOR FLANGE
CONNECTOR FLANGE
.050 (1.27)
.050 (1.27)
.100 (2.54) 6 1
.150 (3.81)
.100 (2.54)
7 2
8
9
3
4
14 15 16 17 18 19 20 21 22 23 24 25
5
1
.150 (3.81) .375 (9.525)
.100 (2.54)
2
3
4
5
6
7
8
1.150 (29.21)
.125 (3.18)
.175
.125 (3.18)
CONNECTOR FLANGE
.100 (2.54) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
9 10 11 12 13 14 15 1
2
3
4
5
6
7
8
1
.150 (3.81) .100 (2.54)
.300 (7.62)
2
3
4
5
6
7
8
9
1.800 (45.72)
15 SOCKET M83513/19-B
31 SOCKET M83513/19-E .125 (3.18)
.125 (3.18)
.050 (1.27)
.050 (1.27)
.100 (2.54)
.100 (2.54) 12 13 14 15 16 17 18 19 20 1
2
3
4
5
6
7
.100 (2.54)
8
9
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
21
1
.150 (3.81)
10 11
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
.100 (2.54)
.225 (6.45)
2.100 (53.34)
21 SOCKET M83513/19-C
37 SOCKET M83513/19-F
.125 (3.18)
K
CONNECTOR FLANGE .050 (1.27) .100 (2.54)
L
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
.150 (3.81) 2X.100 (2.54) 1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
M
.050 (1.27) 1.600 (40.64)
51 SOCKET M83513/20-G .225 (5.72)
N
CONNECTOR FLANGE
.050 (1.27)
P
.100 (2.54) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 .150 (3.81)
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 5 1 1 2
3
4
5
6
7
8
Q
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
3X.100 (2.54)
H J
.150 (3.81)
1.450 (36.83)
F G
CONNECTOR FLANGE
CONNECTOR FLANGE
.150 (3.81)
10 11 12 13 14 15 16 .150 (3.81)
1.300 (33.02)
C E
.050 (1.27)
.050 (1.27) .100 (2.54)
B D
25 SOCKET M83513/19-D
CONNECTOR FLANGE
.100 (2.54)
10 11 12 13
1.550 (39.37)
9 SOCKET M83513/19-A
.150 (3.81)
9
.100 (2.54)
A
.050 (1.27) 2.500 (63.5)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
INDEX
100 SOCKET M83513/21-H
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-17 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/22 Thru /27 Micro-D BS Straight PCB Terminated Connector High Performance These connectors feature goldplated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability.
A B
Solder-Dipped Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.
C D E
How To Order MIL-DTL-83513 Straight PCB Micro-D Connectors Base Part Number
F G H J
Slash NumberShell Sizes
PC Tail Length
Shell Finish
K L
Hardware Options
M N P
m83513/
Sample Part Number
/26-G
03
c
w
M83513 Plug (Pin Contacts) Receptacle (Socket Contacts) 22–A – 9 Contacts 25–A – 9 Contacts 22–B – 15 Contacts 25–B – 15 Contacts 22–C – 21 Contacts 25–C – 21 Contacts 22–D – 25 Contacts 25–D – 25 Contacts 22–E – 31 Contacts 25–E – 31 Contacts 22–F – 37 Contacts 25–F – 37 Contacts 23–G – 51 Contacts 26–G – 51 Contacts 24–H – 100 Contacts 27–H – 100 Contacts (See Table I) 01 - .109 Inch (2.77 mm) PC Tail Length 02 - .140 Inch (3.56 mm) ± .015 (0.38) 03 - .172 Inch (4.37 mm) C - Cadmium A - Electrodeposited Aluminum N - Electroless Nickel K -Zinc Nickel P - Passivated SST T - Nickel Fluorocarbon Polymer N - No Jackpost P - Jackposts Installed Sizes 9-51 T - Threaded Insert in Board Mount Hole (No Jackposts) W - Threaded Insert in Board Mount Hole and jackposts Installed Shell Size 100 (H) U - #4-40 Threaded Insert Y - #4-40 Threaded Insert & Jackpost (See Table I)
Table I: Hardware options N
Thru Hole
P
Thru Hole
T or U
W or Y Threaded Insert
Threaded Insert
Q INDEX
No Jackpost © 2013 Glenair, Inc.
Jackpost High Performance Micro-D Connectors and Cables
Threaded Insert
Jackpost, Threaded Insert
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-18 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/22 Thru /27 Micro-D BS Straight PCB Terminated Connector Table II: Dimensions
A B
J H
C
B THREAD SIZES 9-51 CONTACTS #2-56 UNC 100 CONTACTS #4-40 UNC
ED
D
2 X PCB MTNG HOLES 9-51 CONTACTS .096 ± .005 (2.43 ± 0.13) 100 CONTACTS .125 ± .005 (23.18 ± 0.13) A
E
C
F
F
G
K G
.020 ± .002 (0.51± 0.05)
A Max. Layout
B
C Max.
In.
mm.
In. mm. ±.003 ± 0.08
9P 9S 15P 15S 21P 21S
.790 .790 .940 .940 1.180 1.180
20.07 20.07 23.88 23.88 29.97 29.97
.565 .565 .715 .715 .865 .865
25P 25S
1.275 1.275 1.575 1.575 1.875 1.875 1.775 1.775 2.585 2.585
32.39 32.39 40.01 40.01 47.63 47.63 45.09 45.09 65.66 65.66
.965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
E Max.
F
G
H
In.
mm.
In.
mm.
In.
mm.
In. mm. In. mm. In. mm. ±.004 ±0.10 ±.010 ±0.25 ±.007 ±0.18
14.35 14.35 18.16 18.16 21.97 21.97
.333 .400 .483 .551 .633 .701
8.46 10.16 12.27 14.00 16.08 17.81
.184 .250 .184 .250 .184 .250
4.67 6.35 4.67 6.35 4.67 6.35
.310 .310 .310 .310 .310 .310
7.87 7.87 7.87 7.87 7.87 7.87
.183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95
.333 .333 .333 .333 .333 .333
1.150 1.150 1.150 1.150 1.450 1.450
24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.184 .250 .184 .250 .184 .250 .228 .296 .270 .333
4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46
.310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .351 8.92 .183 .351 8.92 .195 .460 11.68 .183 .460 11.68 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.333 8.46 1.500 .333 8.46 1.500 .333 8.46 1.800 .333 8.46 1.800 .333 8.46 2.100 .333 8.46 2.100 .333 8.46 2.000 .333 8.46 2.000 .525 13.34 2.800 .525 13.34 2.800
8.46 8.46 8.46 8.46 8.46 8.46
J Max.
J
K
In.
mm.
In. mm. ±.010 ±0.25
29.21 29.21 29.21 29.21 36.83 36.83
1.390 1.390 1.390 1.390 1.690 1.690
35.31 35.31 35.31 35.31 42.93 42.93
.155 .155 .155 .155 .155 .155
3.94 3.94 3.94 3.94 3.94 3.94
38.10 38.10 45.72 45.72 53.34 53.34 50.80 50.80 71.12 71.12
1.740 1.740 2.040 2.040 2.340 2.340 2.270 2.270 3.250 3.250
44.20 44.20 51.82 51.82 59.44 59.44 57.64 57.64 82.55 82.55
.155 .155 .155 .155 .155 .155 .155 .155 .293 .293
3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 7.44 7.44
K L M N P Q INDEX
31P 31S 37P 37S 51P 51S 100P 100S
D Max.
H
TAIL LENGH ± .005 (0.13)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-19 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
A B C D E F G H J K L
MIL-DTL-83513/22 Thru /27 Micro-D BS Straight PCB Terminated Connector M83513/22 Thru /24 PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter 2.000 (50.80) 1.150 (29.21) CL
.050 (1.27) 9
.100 (2.54) TYP
5
8 4
.100 (2.54) TYP .050 (1.27) TYP
7 3
51
6 2
35
1
18
.375 (9.53)
50 34
49 33
17
48 32
16
47 31
15
46
45
30
14
29
13
44 28
12
11
.100 (2.54) TYP .050 (1.27) TYP 14
.100 (2.54) TYP
13 6
12 5
11 4
10 3
10
9
31 1
16
30 15
29 14
28 13
27 12
26 11
25 10
11
10
18
9
8
17 7
21
6
5
4
36 20
3
.150 (3.81)
19 2
1
24
21
22 7
6
20 5
19 4
18 3
17 2
1
.150 (3.81)
.100 (2.54) TYP
31 PIN M83513/22-E
16
15
14
5
4
.100 (2.54) TYP
13 3
12 2
25 1
.225 (5.72)
CL
.050 (1.27)
.100 (2.54) TYP .050 (1.27) TYP
6
23 8
1.500 (38.10)
CL
19
7
37
38 22
.100 (2.54) TYP
9
1.450(36.8)
20
8
39 23
.050 (1.27) TYP
15 PIN M83513/22-B
21
40 24
CL
.050 (1.27)
9 2
.225 (5.72)
.050 (1.27)
41 25
1.800 (45.72)
.050 (1.27)
7
42 26
51 PIN M83513/22-G
CL
15
43 27
1.150 (29.21)
8
.100 (2.54) TYP .050 (1.27) TYP
9 PIN M83513/22-A
13
24
23
12
11
21
22 9
10
.100 (2.54) TYP
21 PIN M83513/22-C
.100 (2.54) TYP .050 (1.27) TYP
20 8
19 7
18 6
17 5
16 4
15 3
14 2
1
.150 (3.81)
25 PIN M83513/22-D
2.100 (53.34)
Connector Orientation CL
.050 (1.27) 37
M
Pin #1
19
36 18
35 17
.100 (2.54) TYP
100
99
75 51
.050 (1.27)
26
50 25
15
32 14
31 13
30 12
29 11
28 10
27 9
26 8
25 7
24 6
.100 (2.54) TYP
97 73
96 72
48 23
95 71
47 22
94 70
46 21
93 69
45 20
92 68
44 19
91 67
43 18
42 17
90
66
89 65
41 16
23 5
88 64
40 15
87 63
39 14
86 62 37
38 13
85 61
12
84 60
36 11
83 59
35 10
82 58
34 9
81 57
33 8
80 56
32 7
21
22 4
3
20 2
.150 (3.81)
1
.150 (3.81)
.050 (1.27) TYP
49 24
16
33
2.800(71.12B ) CL
98 74
34
37 PIN M83513/22-F
.100 (2.54) TYP
P
.100 (2.54) TYP .050 (1.27) TYP
N Q
CL
.100 (2.54) TYP
79 55
31 6
78 54
30 5
77 53
29 4
76 52
28 3
27 2
1
INDEX
100 PIN M83513/24-H
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-20 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/22 Thru /27 Micro-D BS Straight PCB Terminated Connector M83513/25 Thru /27 PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter 2.000 (50.80) 1.150 (29.21) CL
.050 (1.27) 6 1
.100 (2.54) TYP
7 2
.100 (2.54) TYP .050 (1.27) TYP
8 3
36
9 4
CL
.100 (2.54) TYP
19
5
1
.375 (9.53)
2
38 21
3
39 22
40 23
4
41 24
5
42 25
6
43 26
7
9 SOCKET M83513/25-A
9
.050 (1.27)
1
2
.100 (2.54) TYP
12
3
13
4
5
10
14
17
15
6
7
18
1
8
.225 (5.72)
13 2
14 3
15 4
16
19
18
6
14
15
51 34
16
.150 (3.81)
35
17
18
.100 (2.54) TYP
2
20
3
21
4
22
5
23
6
24
7
25
8
26
9
27
10
11
28 12
29
30
13
14
31 15
16
.150 (3.81)
.100 (2.54) TYP
7
19 8
.100 (2.54) TYP
20 9
21 10
14 11
.225 (5.72)
CL
.050 (1.27) 15
1
16
2
17
3
4
.100 (2.54) TYP
21 SOCKET M83513/25-C
18
19
5
.100 (2.54) TYP .050 (1.27) TYP 20
6
21
7
22
8
9
23 10
24 11
25 12
.150 (3.81)
13
2.100 (53.34)
Connector Orientation CL
20
Socket #1
1
22 3
.100 (2.54) TYP
52 27
.050 (1.27)
1
28 2
27 8
28 9
29 10
30 11
32
31 12
13
33 14
79 54
80 55
30 4
81 56
57 32
31 5
82
6
83 58
33 7
84 59
34 8
85 60
35 9
86 61
36 10
87 62
37 11
34 15
35 16
36 17
88 63
38 12
89
.100 (2.54) TYP
64 39
13
90 65
40 14
91 66
41 15
92 67
42 16
93 68
43 17
94 69
44 18
95 70
37 18
.150 (3.81)
19
45 19
96
46 20
97 72
98 73
48
47 21
22
99 74
49 23
100 75
50 24
High Performance Micro-D Connectors and Cables
M
Q
51 25
26
100 SOCKET M83513/27-H © 2013 Glenair, Inc.
J
P
.150 (3.81)
71
H
N
.050 (1.27) TYP
29 3
26 7
2.800(71.12B ) CL
78 53
25 6
F
INDEX
77
24 5
37 SOCKET M83513/25-F
.100 (2.54) TYP 76
23 4
E
L
.100 (2.54) TYP .050 (1.27) TYP
21 2
D
K
25 SOCKET M83513/25-D
.050 (1.27)
C
G
31 SOCKET M83513/25-E
.100 (2.54) TYP .050 (1.27) TYP 17
5
13
50 33
1.500 (38.10)
CL
12
12
49 32
31
.050 (1.27) TYP
1.450(36.8)
1
11
48
47 30
CL
.050 (1.27)
15 SOCKET M83513/25-B
.050 (1.27)
46 29
1.800 (45.72) .100 (2.54) TYP .050 (1.27) TYP
11
45 28
51 SOCKET M83513/26-G
CL
10
44 27
8
1.150 (29.21)
9
B
.100 (2.54) TYP .050 (1.27) TYP
37 20
A
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-21 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/28 Thru /33 Micro-D CBS Condensed Straight PCB Terminated Connectors
A
Space-Saving — These connectors take up less room on the PC board. PC tail spacing is .075 inch (1.9mm) between rows.
B
Threaded Inserts — Stainless steel inserts are insert molded into plastic trays. These inserts provide a ground path from the PC board to the mating cable. Solder-Dipped — Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.
C D E F G H J
How To Order Straight PCB Micro-D Connectors Base Part Number
Slash NumberShell Sizes
PC Tail Length Shell Finish
Hardware Options
K L
m83513/
Sample Part Number M83513/ Plug (Pin Contacts) 28–A - 9 Contacts 28–B - 15 Contacts 28–C - 21 Contacts 28–D - 25 Contacts
28–E - 31 Contacts 28–F - 37 Contacts 29–G - 51 Contacts 30–H - 100 Contacts
33-h
01
c
p
Receptacle (Socket Contacts) 31–A - 9 Contacts 31–E - 31 Contacts 31–B - 15 Contacts 31–F - 37 Contacts 31–C - 21 Contacts 32–G - 51 Contacts 31–D - 25 Contacts 33–H - 100 Contacts
(See Table II) 01 - .109 Inch (2.77 mm) 02 - .140 Inch (3.56 mm) 03 - .172 Inch (4.37 mm) PC Tail Length ± .015 (0.38) C - Cadmium A - Electrodeposited Aluminum N - Electroless Nickel K - Zinc Nickel P - Passivated SST T - Nickel Fluorocarbon Polymer N - No Jackpost P - Jackposts Installed Sizes 9-51 Shell Size 100 (H) T - Threaded Insert in Board Mount Hole (No Jackposts) U - #4-40 Threaded Insert W - Threaded Insert in Board Mount Hole and Jackposts Installed Y - #4-40 Threaded Insert & Jackpost (See Table I)
Table I: Hardware Options
HARDWARE OPTION N
NO JACKPOST, NO THREADED INSERT
M
HARDWARE OPTIONS T or U
HARDWARE OPTION P
HARDWARE OPTIONS W or Y
JACKPOST AND THRU-HOLE
THREADED INSERT, NO POST
JACKPOST AND THREADED INSERT
N P Q
PC BOARD
.160 (4.1) MIN. (9-51 PINS) .225 (5.7) MIN. (100 PIN)
MTNG HOLE DIA.
INDEX
9-51 CONTACTS .096/.088 (2.44/2.24) 100 CONTACTS .128/.122 (3.25/3.10)
© 2013 Glenair, Inc.
THREAD SIZE
9-51 CONTACTS # 2-56 UNC-2B 100 CONTACTS # 4-40 UNC-2B
THREAD SIZE
9-51 CONTACTS # 2-56 UNC 100 CONTACTS # 4-40 UNC USE WITH .156 (3.96) MAX. PC BOARD THICKNESS
High Performance Micro-D Connectors and Cables
THREAD SIZE
9-51 CONTACTS #2-56 UNC 100 CONTACTS #4-40 UNC
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-22 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/28 Thru /33 Micro-D CBS Condensed Straight PCB Terminated Connectors Table III: Dimensions
A
F
A C E
.025 (0.6)
G
D
B
TAIL LENGTH ± .015 (0.38)
B
Ø .020 (0.51) ± .002 (0.05)
A Max. Layout 9P 9S 15P 15S 21P 21S
25P 25S 31P 31S 37P 37S 51P 51S 100P 100S
B
In.
mm.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 2.170 2.170
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 55.12 55.12
C Max.
D Max.
E Max.
± .005
In .
mm. ± 0.13
In .
mm.
In .
mm.
In .
mm.
.565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800
14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86
.185 .253 .185 .253 .185 .253 .185 .253 .185 .253 .185 .253 .228 .296 .271 .333
4.70 6.43 4.70 6.43 4.70 6.43 4.70 6.43 4.70 6.43 4.70 6.43 5.79 7.52 6.88 8.46
.310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .400 .400 .510 .510
7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 10.16 10.16 12.95 12.95
F
G Max.
± .003
In .
mm. ± 0.08
In .
mm.
.183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95
.355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .355 .430 .430
9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 9.02 10.92 10.92
C D E F G H J K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-23 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/28 Thru /33 Micro-D CBS Condensed Straight PCB Terminated Connectors M83513/28 Thru 30 PCB Layouts – Pin Connectors
A B C D
Patterns shown are for connector mounting side of PC board. .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
F G H J K L
8
P Q
.075 (1.91)
.183(4.65) TYP
15 13 11 9 8 6 4 2
.225(5.72) 1
3 4
2
.200 (5.08) .565 (14.35)
10
12
14
6 7
5
.038 (0.96) REF
.096 (2.44) DIA TYP
7
.038 (0.96) REF
5
Connector Orientation
.225 (5.72) 1
3
.350(8.89) REF .715 (18.16)
9 PIN M83513/28-A
.096 (2.44) DIA TYP
15 PIN M83513/28-B Pin #1
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.075 (1.91) 18
20 11
.038 (0.96) REF
9 10
7 8
12
14
16 17
19
21
15
13
4
6
.500 (12.7) REF
24
.225 (5.72)
1
3
5
.075 (1.91)
12
.096 (2.44) DIA TYP
10
30 16
.038 (0.96) REF
27
13
11
22
24 25
23 8
10
12
14 15
26
28 29
9
18
20
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
6 7
4 5
.225 (5.72)
17
19
21
2 1
3
.096 (2.44) DIA TYP
.750(19.05) REF 1.115 (28.32)
.038 (0.96) REF
6
4
2
.096 (2.44) DIA TYP
34 33
35
19
17 18
32
15 16
30 31
13 14
9
11 12
27
29 10
24
26
28
8
20 21
3
5
7
.900(22.86) REF 1.265 (32.13)
22 23
25
4
6
.225 (5.72) 1
2
.096 (2.44) DIA TYP
37 PIN M83513/28-F 1.800 (45.72)
.075 (1.91) TYP .0375 (0.95) TYP .096 (2.44) DIA TYP
.075 (1.91)
99 97 96 94 93 91 90 88 87 85 84 82 81 79 78 76
51 49 46 44 42 41 39 38 37 36
100 74 73 71 70 68 67 65 64 62 61 59 58 56 55 53 52
35 33 31 30 29 27 26 24 23 20 1 34 32 14 12 28 9
8
18 17 16 15 13 11 10 7
.750 (19.05) 1.215 (30.86)
6
4 5
.1875 (4.76)
75 98 72 95 69 92 66 89 63 86 60 83 57 80 54 77
50 48 47 45 43 25 40 22 21 19
51 49 48 46 45 43 42 40 39 37 36 34 33 31 30 28 27
2
26 50 23 47 20 44 17 41 14 38 11 35 8
3
.125 (3.18) DIA TYP
INDEX
51 PIN M83513/29-G
© 2013 Glenair, Inc.
8
.600(15.24) REF
.225 (5.72)
1
3
5
.075 (1.91) 36 37
31 PIN M83513/28-E
.2325 (5.91) TYP
7
14 15
25 PIN M83513/28-D
.075 (1.91)
31
16 17
19
.965 (24.5)
21 PIN M83513/28-C .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
18
20
21 9
11
13
.038 (0.96) REF
2
22 23
25
.865
M N
.075 (1.91) 9
E
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP
High Performance Micro-D Connectors and Cables
25 24 22 21 19 18 16 15 13 12 10 9
.0375 (0.95) TYP .075 (1.91) TYP
32 5 7
6
29 2 4
3
1
.075 (1.91)
.2812 (7.14)
100 PIN M83513/30-H
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-24 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/28 Thru /33 Micro-D CBS Condensed Straight PCB Terminated Connectors MM83513/31 Thru /33 PCB Layouts – Socket Connectors
A
Patterns shown are for connector mounting side of PC board. .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.075 (1.91) 7
10
.225(5.72)
5
3 2
9
.096 (2.44) DIA TYP
Socket #1 .075 (1.91) 15
13
1
.038 (0.96) REF
2
18
5
3
19
17 16
14 4
7 6
21
20 9 11
8
.500 (12.7) REF
.038 (0.96) REF
2
.038 (0.96) REF
6
4
8
12
10
14
.750(19.05) REF 1.115 (28.32)
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
19
23
21
4
6
8
.600(15.24) REF
10
G
25
.225 (5.72)
12
.096 (2.44) DIA TYP
.096 (2.44) DIA TYP
.038 (0.96) REF
K
21 1 2
23 25 27 29 31 33 35 37 22 24 26 28 30 32 34 36 3 9 7 11 13 15 17 19 5 4
6
8
10
12
.900(22.86) REF 1.265 (32.13)
14
16
.225 (5.72)
18
.096 (2.44) DIA TYP
37 Socket M83513/31-F
.096 (2.44) DIA TYP 77 79 80 82 83 85 86 88 89 91 92 94 95 97 98 100 52 78 55 81 58 84 61 87 64 90 67 93 70 96 73 99 76 53 54 56 57 59 60 62 63 65 66 68 69 71 72 74 75
36 37 39 40 42 44 45 47 48 50 20 38 23 41 43 28 46 31 49 51 19 21 22 24 26 27 29 30 32 34 35 4
2 1
3
6 5
25 9 7
11 12 14 33 17
8 10 13 15 16 18
.750 (19.05)
1.215 (30.86)
.125 (3.18) DIA TYP
51 Socket M83513/32-G
High Performance Micro-D Connectors and Cables
.1875 (4.76)
27 29 30 32 33 35 36 38 39 41 42 44 45 47 48 50 51 1 28 4 31 7 34 10 37 13 40 16 43 19 46 22 49 25 2 3 5 6 8 9 11 12 14 15 17 18 20 21 23 24 26
.0375 (0.95) TYP .075 (1.91) TYP
.075 (1.91)
.2812 (7.14)
100 Socket M83513/33-H
U.S. CAGE Code 06324
L M N
1.800 (45.72)
.075 (1.91)
H J
.075 (1.91) 20
.075 (1.91) TYP .0375 (0.95) TYP
© 2013 Glenair, Inc.
F
25 Socket M83513/31-D
31 Socket M83513/31-E
.2325 (5.91) TYP
E
.965 (24.5)
.225 (5.72)
16
D
.096 (2.44) DIA TYP
16 18 20 22 24 11 13 3 7 9 5
2
.096 (2.44) DIA TYP
20 22 24 26 28 30 19 21 23 25 27 29 31 3 5 11 13 15 9 7
17
15 1
.075 (1.91) 18
8
.075 (1.91)
14
21 Socket M83513/31-C
17 1
.225 (5.72)
15 Socket M83513/31-B
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
.865
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
6
.350(8.89) REF .715 (18.16)
.225 (5.72)
10
4
C
14
13 15 5 7
3 2
.038 (0.96) REF
Connector Orientation
9 Socket M83513/31-A .100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP .183(4.65) TYP
11
1
4
.200 (5.08) .565 (14.35)
12
12
P Q INDEX
.038 (0.96) REF
.075 (1.91)
.183(4.65) TYP
9 8
6 1
B
.100 (2.54) TYP .075 (1.91) TYP .050 (1.27) TYP .025 (0.64) TYP
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-25 E-Mail:
[email protected]
Micro-D MIL-DTL-83513
MIL-DTL-83513/05 Micro-D Hardware Jackscrews and Jackposts
A
Order One Kit Per Connector. Jackpost kits contain two posts, two hex nuts and 2 lockwashers. Jackscrew kits contain 2 screws and 2 e-rings.
B
MIL Spec Hardware Kits feature 300 series stainless steel.
C D
MIL Spec Jackscrew Kits Configuration
Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC
E F
Jackpost
J
Hex Head Jackscrew Low Profile
Slot Head Jackscrew Low Profile
75-130 Mil Spec Size H #4-40 UNC-2A Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
M N
75-130 Mil Spec Size H #4-40 UNC-2A Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
K L
75-130 Mil Spec Size H #4-40 UNC Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
G H
Connector Size, Thread Size
Hex Head Jackscrew Extended
P
75-130 Mil Spec Size H #4-40 UNC-2A Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
Q INDEX
Slot Head Jackscrew Extended
© 2013 Glenair, Inc.
75-130 Mil Spec Size H #4-40 UNC-2A
Mil Spec Part Number
Glenair Part Number
Dimensions .190 / .185 (4.8 / 4.7)
M83513/05-07
080-00-00-100
.125 (3.2) HEX .086 (2.2)-56 UNC-2B
.086 (2.2)-56 UNC-2A
.490 / .460 (12.4 / 11.7)
.185/.175 (4.7 / 4.4)
M83513/05-17
080-00-00-101
.187 (4.7) HEX .112 (2.8)-40 UNC-2B
080-00-00-502
.490 / .460 (12.4 / 11.7) .083 (2.11) DIA
.062 (1.57) HEX
M83513/05-02
.112 (2.8)-40 UNC-2A
.125 (3.18) DIA .258 (6.55) MAX
.103 (2.62) MAX .140 (3.56) DIA
.062 (1.57) HEX
M83513/05-12
080-00-00-512
.292 (7.41) MAX .083 (2.11) DIA
080-00-00-505
.258 (6.55) MAX .140 (3.56) DIA
080-00-00-515
.292 (7.41) MAX .062 (1.57) HEX
080-00-00-503
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD
.187 (4.75) DIA .098 (2.49)
M83513/05-03
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD
.125 (3.18) DIA .103 (2.62) MAX
M83513/05-15
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD
.187 (4.75) DIA .098 (2.49)
M83513/05-05
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD
.083 (2.11) DIA
.156 (3.96) DIA MAX
.258 (6.55) MAX
.610 (15.49) MAX .062 (1.57) HEX
M83513/05-13
080-00-00-513
.140 (3.56) DIA
.200 (5.08) DIA MAX
.083 (2.11) DIA
080-00-00-506
.156 (3.96) DIA MAX
.140 (3.56) DIA
080-00-00-516
High Performance Micro-D Connectors and Cables
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD .258 (6.55) MAX
.610 (15.49) MAX
M83513/05-16
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD .292 (7.41) MAX
.610 (15.49) MAX
M83513/05-06
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD
.200 (5.08) DIA MAX .610 (15.49) MAX
U.S. CAGE Code 06324
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD .292 (7.41) MAX
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-26 E-Mail:
[email protected]
Micro-D Backshells
Product Selection Guide Round Cable Entry Backshell Page M-6
Round Cable Entry, Split Shell Banding Backshell Page M-9
EMI/RFI Round Cable Entry Backshells One piece aluminum Micro-D backshells. Terminate cable shields with BandMaster™ ATS stainless steel straps. Finish the cable with heat-shrink tubing or boots, sold separately. Stocked in top, side, 45°, dual 45° and dual top entry. MIL-DTL-83513 version also available. Split EMI/RFI Micro-D Backshell with and Screwlocks This backshell features screwlocks, allowing the connectors to be fully mated before the hardware is fastened.
Round Cable Entry Shield Sock Page M-10
EMI/RFI Micro-D Backshells With Braid Attached These backshells are terminated to tinned copper braid.
Composite Round Cable Entry Page M-12
Round Entry Split EMI/RFI Micro-D Backshell and Screwlocks This backshell features screwlocks, allowing the connectors to be fully mated before the hardware is fastened.
Elliptical Entry EMI/RFI Micro-D Backshells Our elliptical backshells accomodate larger wire bundles. See the table on page M-5 for more information.
Elliptical Entry Page M-14
Elliptical Split Banding Backshell Page M-21
Elliptical EMI/RFI Split Shell Micro-D Backshell This backshell features screwlocks, allowing the connectors to be fully mated before the hardware is fastened.
Strain Relief Page M-23
Strain Relief Backshells (not for EMI) These backshells are used for wire or cable strain relief. Three styles are provided.
Potting Shell Page M-26
Potting Shell (not for EMI) Potting shells are attached to the connector and filled with epoxy or similar encapsulants to provide environmental protection and strain relief.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-1 E-Mail:
[email protected]
A B C D E F G H J K L M N P Q INDEX
Section M Micro-D Backshells
Micro-D Backshells
Micro-D Backshells General Information and Product Selection Guide
A
Micro-D Backshell Selection Guide Backshell Type
Ib a Av cks ai he la l St ble l ra in in L Po Rel igh tti ie f t w ei n B Sw g S ack ght C itc hel sh el om l h l Ci ing po rc sit ul Sh e e a El r C ll l ip ab tic le St al C En ra t a ig bl ry 45 ht C e En º C ab t le r y a Si ble En de t E C nt ry Sl abl ry ot e He En t a He d ry x H Ja c Ex ead ksc re te w n Jac s Sc ded ksc r re e J a w w c s On Loc ksc ks rew e P I s Sp iece nste l it Ba ad ( Ac Two cksh of J ce el ack l p Pie sc Ac ts S ce) re w Ba ce ta s ck pt nd Co s M ard sh e nn ic ro Sh ll e Co cto Sh ield r ie nn ld Ban e At Co cto tac Ba d h nn r A e nd e c tta s w it to c r i he h C s C s w l ip ap i tiv th E at -R e d in by g Ba ck sh el
C
● ● ● ● ●
● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● (3) ● ● ● ● ● ● ●
P Q
A
Same Day Stock*
C
A
Accepts Standard Width Shield Band Meets NASA Outgassing Low Residual Magnetism Oversize Elliptical Cable Entry Split Backshell With Screwlocks for Fast Mating
INDEX
*Availability:
A
C
●
●
(2)
●
B
A
D
8 19
8
7-
17
50
5
7-
17
D
50
6
7-
14
50
5
7-
14
50
8
7-
08
50
5
7-
03
50
7
Lightest Weight
7-
04
A
50
2
0-
01
50
1
0-
0 50
0-
01
L N
M-6 M-10 M-25 M-14 M-26 M-12 M-9 M-24 M-15 M-21 M-23
Glenair Qwik Connections
K M
● ● ● ● ● ● ● ● ● ● ● (1) ● ● ● ● ● ● ● ● (2) ● ● ● ● ● ● ● ● ● ●
Page Number
● ● ● ● ● ●
(1) (1) (1)
(1) Extended jackscrew will not work with 45° cable entry or with dual 45 °entry backshells. (2) Sizes 9 thru 69 use e-rings or c-clips for connector attachment, 100 pin uses c-clip only. (3) The cable entry is on the long side of shell. See ordering information for clarification.
01
J
●
● ● ●
50
H
● ●
0-
G
500-010 500-011 500-012 500-047 507-035 507-088 507-145 507-146 507-175 507-178 507-198
50
F
EM
D E
Other
Hardware
l
B
Cable Entry
D
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
A — All sizes in stock. B — Most sizes in stock. C — A few sizes in stock. D — Not Stocked.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-2 E-Mail:
[email protected]
Micro-D Backshells
Micro-D Backshells General Information and Reference Data About Micro-D Backshells Micro-D EMI backshells connect cable shields to Micro-D connectors, providing strain relief and mechanical protection. These backshells are made out of aluminum alloy. Electroless nickel is the most widely used finish. These backshells are compatible with industry- standard metal shell M83513 type connectors. The following application notes explain how to select the right type of backshell.
C
Band Platform For EMI Shield
D E
Select a strain relief backshell if your connector has individual wires or if your wire bundle does not have a metal shield. EMI backshells do not normally require additional strain relief. Micro-D wires are typically potted, and the shield braid is a sufficient strain relief. An optional ty-wrap leg is available if necessary. Add "S" to the end of the part number.
Standard Band Versus Micro Band Most Micro-D EMI backshells feature low profile band platforms designed for narrow (.125" width) micro band. Some have a taller band platform which also accepts standard bands (.250" width). Please refer to the "Backshell Selection Guide" on the preceding page to identify which backshells are compatible with both the standard band and the micro band. One Piece Backshell Versus Split Backshell Use one piece backshells if in stock availability is important. Split backshells allow installation after the other end of the cable has been terminated. Some split backshells fit over the connector, eliminating the highly magnetic clip. Split versions also can accommodate screw locks. Elliptical Versus Circular Cable Entry Choose elliptical backshells if the wire bundle diameter is too big to fit in a circular cable entry. Large Micro-D connectors (51 pins and up) usually exceed the limits of the round entries. Refer to the cable entry and wire bundle tables in this section to find out if an elliptical entry is necessary. The actual size illustrations to the right show the difference between round and elliptical cable entries. The round entry circular mil area = �(½D)2 = .11 In.2. The formula for the area of an ellipse is �(Length)(Width) ÷ 4 = .36 In.2 © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
B
Qwik-Ty Option Add "S" to Part Number
Strain Relief Clamp
G .44 (11)
.32 (8)
Micro Band Platform
F
Standard Band Platform
Jackscrews and Screwlocks Jackscrews are fixed in position and must be turned in order to mate the connectors together. Screwlocks float and allow the connectors to be coupled before the screwlocks are engaged. Screwlocks allow faster mating, while jackscrews offer less risk of contact damage.
H J K L M N
Round Cable Entry 100 Pin .375 Inch (9.5 mm.) Diameter
P Q
Elliptical Cable Entry 100 Pin .360 By 1.29 Inch (9.1 X 32.8 mm.) U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-3 E-Mail:
[email protected]
INDEX
EMI Versus Non-EMI Backshells Select EMI backshells if your cable has a braided copper shield. The cable shield is secured to the backshell with a BandMaster™ ATS strap, supplied with the backshell or purchased separately.
A
Micro-D Backshells
Micro-D Backshells General Information and Reference Data BandMaster® ATS Shield Termination System
A B C D E F G
Fast, Cost-Effective Shield Termination Attach cable braid shields to EMI backshells with BandMaster® ATS stainless steel straps. The Band-Master® ATS system offers fast termination and the flexibility to handle different diameters with the same band. The aerospace industry has adopted this system for every type of application where reliability and durability are essential.
IMPORTANT NOTE: ALWAYS DOUBLE-WRAP BANDS! Contact Glenair or visit our website (www.glenair.com) to view our complete line of BandMaster® ATS products, including pneumatic tools for high production and calibration kits.
H
The New BandMaster™ ATS Micro Band Tool Part Number 600-061 without counter Part Number 601-101 with counter Weight: 1.18 lbs. See our full offering of Band-Master™ ATS tools and accessories at http://www.glenair.com/catalogs/bandmaster.pdf Medium Micro Band 8.0 Inches (203.2 mm.) part number 601-060 standard or 601-061Pre-coiled up to .88 Inches (22.4 mm.) Diameter Long Micro Band 14.0 inches (355.6 mm.) part Number 601-064 standard or 601-065 pre-coiled up to 1.88 Inches (47 mm) diameter
J K L M N
Step One Cable Prep
Lay individual shields over the band platform. Pull overall braid shield over the band platform so that all braid strands will be captured by the band.
P Q
Step Two Install Band
Wrap the band through the buckle twice. Insert the working end into the banding tool in the direction shown on the tool. Squeeze the short grey handle to insert the band. Slide the band onto the cable. Close the blue handle repeatedly until the handle no longer opens. Close the long grey handle until the tool cuts the band. Remove the excess strap from the tool by closing the small grey handle.
Step Three Trim Braid
It's a snap! Just trim the excess braid and you're done.
INDEX
*Visit the Glenair Website for video demonstrations of banding termination at http://www.glenair.com/banding/index.htm
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-4 E-Mail:
[email protected]
Micro-D Backshells
Maximum Discrete Wire Bundle Diameters (See Note 1) No. Of Wires
Wire Gauge
9 9 9 15 15 15 21 21 21 25 25 25 31 31 31 37 37 37 51 51 51 100 100 100
#24 #26 #28 #24 #26 #28 #24 #26 #28 #24 #26 #28 #24 #26 #28 #24 #26 #28 #24 #26 #28 #24 #26 #28
Wire Bundle Diameter
M22759/11 Recommended Backshell Cable Entry Code
0.153 (3.90) 0.136 (3.50) 0.119 (3.00) 0.197 (5.00) 0.175 (4.40) 0.153 (3.90) 0.233 (5.90) 0.207 (5.30) 0.181 (4.60) 0.254 (6.50) 0.226 (5.70) 0.198 (5.00) 0.283 (7.20) 0.252 (6.40) 0.220 (5.60) 0.309 (7.90) 0.275 (7.00) 0.241 (6.10) 0.363 (9.20) 0.323 (8.20) 0.282 (7.20) .509 (12.9) .452 (11.5) .396 (10.1)
M22759/33 Recommended Backshell Wire Bundle Diameter Cable Entry Code
06 05 05 08 07 06 09 08 07 * 09 08 * 09 08 * * 09 * * * * * *
0.132 (3.40) 0.115 (2.90) 0.098 (2.50) 0.171 (4.30) 0.149 (3.80) 0.127 (3.20) 0.202 (5.10) 0.176 (4.50) 0.150 (3.80) 0.220 (5.60) 0.192 (4.90) 0.164 (4.20) 0.245 (6.20) 0.214 (5.40) 0.182 (4.60) 0.268 (6.80) 0.234 (5.90) 0.199 (5.10) 0.315 (8.00) 0.274 (7. 0) 0.234 (5.90) 0.441(11.2) 0.384 (9.80) 0.328 (8.30)
05 05 04 06 06 05 07 07 06 08 07 06 09 08 07 * 09 08 * 10 09 * * *
*Glenair recommends elliptical style backshell NOTES: 1. This sizing chart is for discrete wire bundles of the type and gauge indicated. When using twisted pairs, or other wire types/configurations, refer to Glenair Circular Connector Backshells & Accessories catalog, page 8, “Calculating Wire Bundle Diameter.” Glenair recommends 70% area fill (wire bundle area to entry port area), not to exceed 80% area fill on Micro-D Backshells. 2. When solder-cup Micro-D connectors and low-profile backshells (short in height) are used in conjunction, the transition angle from the outer pins to the centralized entry port becomes severe and can increase the susceptibility to damage. Glenair recommends elliptical shaped entries to minimize angles of contact that can occur with round cable entries. 3. Blending and deburring/smoothing of internal geometry may not produce “perfectly” smooth, rounded features, but has a proven history of success in precluding wire abrasion damage. For additional wire protection, wrap wire bundle with Kapton tape in areas that may come into contact with cable entry transitions or other interior angles. 4. Glenair recommends that harness designs avoid excessive fill percentages and severe contact angles as previously described. For applications where these conditions must exist, consult our factory for appropriate additional design / workmanship solutions
Finish Options Finish Code C E
Description Black Anodize Chem Film
Specification MIL-A-8625 Type II Class 2 MIL-C-5541 Class 3
Corresponding Connector Finish Code Code 4 Code 6
J
Cadmium Plate Over Electroless Nickel with Yellow Chromate Conversion Coating
SAE-AMS-QQ-P-416 Type II Class 3
Code 1
M
Electroless Nickel
SAE-AMS-26074 Class 3
Code 2
NF
Olive Drab Cadmium Plate Over Electroless Nickel (1000 Hour Corrosion Rated)
SAE-AMS-QQ-P-416
NF (Special order)
XM Z2
Electroless Nickel (Composite Only) Gold Plated
SAE-AMS-26074 Class 3 ASTM B488
Code 2 Code 5
Materials Shell, Saddle Clamps Clips, E-Rings Jackscrews, Washers, Jackposts © 2013 Glenair, Inc.
Aluminum Alloy 6061 -T6 Per QQ-A-200, QQ-A-225 (Machined Components) Aluminum Alloy 6061-T6 Per QQ-A-591 (A380) (Die-Cast Components) 17-7PH Stainless Steel 300 Series Stainless Steel, Passivated
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-5 E-Mail:
[email protected]
A B C D E F G H J K L M N P Q INDEX
Micro-D Backshells Micro-D Backshell Wire Bundle Sizing Chart and Material and Finish Options
Micro-D Backshells
500-010 EMI/RFI Micro-D Banding Backshell Round Cable Entry
Glenair’s Most Popular Micro-D Backshell is stocked in all sizes. Choose straight, side or 45° cable entry.
A B
Rugged One-Piece Aluminum shell with stainless steel hardware, available in standard nickel plating, or choose optional finishes.
C
17-7PH Stainless Steel Clips attach the backshell to the connector. These backshells accept standard and micro BandMaster™ ATS shield termination straps.
D E F G H
How To Order EMI/RFI Backshells
Series
Shell Finish
Shell Size
J
Hardware Option
K
Cable Entry Code
L M N P Q
500T010
Sample Part Number
EMI Band Strap Option
INDEX
Style E &T 08 08 08 08 09 09 10 09 09 10 12
Style D
Style S
06 08 08 08 09 09 10 09 09 10 12
09 10 10 12 12 12 12 12 12 12 12
© 2014 Glenair, Inc.
25
H
08
500T010 - Top Entry 500S010 - Side Entry 500E010 - 45° Entry 500D010 - Dual 45° (See Table III) A - Cadmium Plate/Bright Dip N - Cadmium Plate/Olive Drab; Over Nickel B - Cadmium Plate/Olive Drab NF - Cad/O. D. Over Electroless; Nickel B1 - Cadmium Plate/Olive Drab, Type II Class 1 (1000 Hour Salt Spray) J - Gold Iridite Over Cadmium; Plate Over T - Cadmium Plate/Bright Dip Over Nickel Nickel Z2 - Gold Plate M - Electroless Nickel Z1 - Passivate, Stainless;Steel Material 09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table III) B - (2) Fillister Head Jackscrew EJ - (2) Male Extended (Style T and S Only) BJ - (2) Male Fillister Head F - (2) Jackpost, Female H - (2) Hex Head Jackscrew FB - (1) Female Jackpost, (1) Male Filister Head HJ - (2) Male Hex FH - (1) Female Jackpost, (1) Male Hex Socket E – (2) Extended Jackscrew N - No Hardware 04 - .125 (3.2) 05 - .156 (4.0) 06 - .188 (4.8) 07 - .219 (5.6) 08 - .250 (6.4) 09 - .281 (7.1) 10 - .312 (7.9) 11 - .344 (8.7) 12 - .375 (9.5) (See Table I) Omit (Leave Blank) - Band Not Included Standard Band - .250" Wide B - Uncoiled Band Included K - Coiled Band Included Use the following codes to order band strap with the connector. For best availability, order band Micro Band - .125" Wide separately. M - Uncoiled Band Included L - Coiled Band Included
Table I: Maximum Cable Entry Code Shell Size 9 15 21 25 31 37 51 51-2 67 69 100
M
Table II: Maximum Cable Entry Dimensions In.
mm.
04
P ±.015 In. ± mm. ± .015 0.38 .125 3.2
.296
7.5
05
.156
4.0
.327
8.3
06
.188
4.8
.359
9.1
07
.219
5.6
.390
9.9
08
.250
6.4
.421
10.7
09
.281
7.1
.452
11.5
10
.312
7.9
.484
12.3
11
.344
8.7
.515
13.1
12
.375
9.5
.546
13.7
Cable Size
R Dia. Max
High Performance Micro-D Connectors and Cables
Notes 1. 2. 3. 4.
Assembly identified with manufacturer's name and P/N 51-2 shell size is for a special 51 position 2 row Micro D connector Knurled or ribbed banding platform - manufacturer's option EMI gasket mounts between mating connector and panel
Materials/Finish
• Shell: Aluminum Alloy 6061 -T6 Per QQ-A-200, QQ-A-225 (Machined Components) Aluminum Alloy 6061-T6 Per QQ-A-591 (A380) (Die-Cast Components) • Clips, E-Rings: 17-7PH Stainless Steel • Jackscrews, Washers, Jackposts: 300 Series Stainless Steel, Passivated
U.S. CAGE Code 06324 Rev 8-18-14
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-6 E-Mail:
[email protected]
Micro-D Backshells
500-010 EMI/RFI Micro-D Banding Backshell Round Cable Entry
Table III: Dimensions Available for Style T and S Only
Style T - Top Entry
Code B
E R Max Typ
P Typ .04 Min
B
.06(1.5) L
.44(11.2)
Code BJ
Configuration Mfr Option D
H
Connector Shown For Reference Only
Code E Floating Extended Jackscrew
E
H
Style E - 45° Entry
Code F Female Jackpost
Style S - Side Entry M
.188(4.8)
G K
Code HJ Hex Socket Jackscrew Code H Extended Jackscrew
Configuration Mfr Option
K
C
M
Code S Qwik-Ty
N
B A
Size 09 15 21 25 31 37 51 51-2 67 69 100
A Max. In. mm. .850 21.59 1.000 25.40 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77
B Max. In. mm. .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .410 10.41 .370 9.40 .370 9.40 .410 10.41 .460 11.68
© 2013 Glenair, Inc.
C In. mm. .565 14.35 .715 18.16 .865 21.97 .965 24.51 1.115 28.32 1.265 32.13 1.215 30.86 1.615 41.02 2.015 51.18 1.515 38.48 1.800 45.72
D Max. In. mm. .780 19.81 .910 23.11 1.030 26.16 1.090 27.69 1.150 29.21 1.190 30.23 1.220 30.99 1.220 30.99 1.220 30.99 1.220 30.99 1.280 32.51
E Max. In. mm. .410 10.41 .580 14.73 .740 18.80 .850 21.59 .980 24.89 1.130 28.70 1.080 27.43 1.510 38.35 1.880 47.75 1.380 35.05 1.470 37.34
F Max In. mm. .350 8.89 .470 11.94 .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .780 19.81 .780 19.81 .780 19.81 .840 21.34
H J
Style D - 45° Dual Entry
EMI Gasket Option (559-005) See Note 4 Optional Configuration See Note 3
F G
.390 (9.9)
N
C D
F .175 (4.4) Code EJ Extended Jackscrew
A
G Max In. mm. .637 16.18 673 17.09 .707 17.95 .748 19.00 .756 19.20 .774 19.66 .859 21.82 .859 21.82 .859 21.82 .859 21.82 1.014 25.76
High Performance Micro-D Connectors and Cables
H Max. In. mm. .350 8.89 .470 11.94 .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .780 19.81 .780 19.81 .780 19.81 .840 21.34
J Max. In. mm. .637 16.18 .673 17.09 .707 17.95 .748 19.00 .756 19.20 .774 19.66 .859 21.82 .859 21.82 .859 21.82 .859 21.82 1.014 25.76
K In. mm. .435 11.05 .440 11.2 .458 11.63 .483 12.27 .476 12.09 .478 12.14 .548 13.91 .548 13.91 .548 13.91 .548 13.91 .687 17.45
L Max. In. mm. 1.040 26.42 1.170 29.72 1.290 32.77 1.350 34.29 1.420 36.07 1.450 36.83 1.480 37.59 1.480 37.59 1.480 37.59 1.480 37.59 1.580 40.13
U.S. CAGE Code 06324
M Max. In. mm. 1.000 25.40 1.030 26.16 1.050 26.67 1.090 27.69 1.130 28.70 1.230 31.24 1.250 31.75 1.250 31.75 1.250 31.75 1.250 31.75 1.320 33.53
N Max. In. mm. .680 17.27 .730 18.54 .765 19.43 .830 21.08 .890 22.61 .955 24.26 1.005 25.53 1.005 25.53 1.005 25.53 1.005 25.53 1.080 27.43
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-7 E-Mail:
[email protected]
L M N P Q INDEX
Micro-D Backshells
507-142 EMI/RFI Dual Entry Banding Backshell Round Cable Entry
Dual Cable Entry EMI backshell allows attachment of two separate wire bundles to the same Micro-D connector. This backshell accepts both standard and micro shield termination straps.
A B C
507-142
D
Series
507-142
E
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel
Connector Size
21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table I)
F
Hardware Option
B – Fillister Head Jackscrew E – Extended Jackscrew
EMI Band Strap Option
Omit (Leave Blank) – Band Not Included B – Standard Band (2 supplied) .250" Wide
G
H
B
H – Hex Head Jackscrew F – Jackpost, Female M – Micro Band (2 supplied) .125" Wide
E
CODE B FILLISTER HEAD JACKSCREW .44 (11.1)
C
CODE H HEX HEAD JACKSCREW
D
B
.175 (4.4)
H
A
L
CODE F FEMALE JACKPOST
CONNECTOR ORDERED SEPARATELY
M
Q
25
Z2 – Gold
G F
J
P
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
M
Table I: Dimensions
H
N
• Shell: Aluminum Alloy 6061 -T6 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
How To Order EMI/RFI Dual Entry Backshell Sample Part Number
K
Materials
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
Size
INDEX
21 25 31 37 51 51-2 67 69 100
A Max. In. mm. 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77
© 2013 Glenair, Inc.
B Max. In. mm. .370 9.40 .370 9.40 .370 9.40 .370 9.40 .410 10.41 .370 9.40 .370 9.40 .410 10.41 .460 11.68
C In. .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
mm. 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
D Max. In. mm. 1.030 26.16 1.090 27.69 1.150 29.21 1.190 30.23 2.130 54.10 2.130 54.10 2.130 54.10 2.130 54.10 1.280 32.51
E Max. In. mm. .740 18.80 .850 21.59 .980 24.89 1.130 28.70 1.080 27.43 1.510 38.35 1.880 47.75 1.380 35.05 1.470 37.34
High Performance Micro-D Connectors and Cables
F In. .125 .188 .250 .344 .312 .281 .281 .312 .500
G mm. 3.18 4.78 6.35 8.74 7.92 7.13 7.13 7.93 12.70
In. .281 .344 .406 .500 .469 .469 .469 .469 .688
U.S. CAGE Code 06324
mm. 7.13 8.74 10.31 12.70 11.91 11.91 11.91 11.91 17.48
CODE E EXTENDED JACKSCREW
H Max. In. mm. .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .780 19.81 .780 19.81 .780 19.81 .840 21.34 Rev 07.24.15 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-8 E-Mail:
[email protected]
Micro-D Backshells
507-145 EMI/RFI Split Shell Banding Backshell with Screwlocks Round Cable Entry
Split EMI Backshells allow installation on wired connector assemblies.
Materials
• Shell: Aluminum Alloy 6061 -T6 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
Captive Screwlocks for fast connection. Plug in the connector, then fasten the hardware.
507-145
Sample Part Number 507-145
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel
Connector Size
09, 15, 21, 25, 31, 37 51, 51-2, 67, 69, 100 (See Table I)
Hardware Option
OMIT – For Fillister Head Screwlock E – Extended Screwlock
EMI Band Strap Option
Omit (Leave Blank) – Band Not Included B – Micro Band Supplied K – Coiled Micro Band Supplied
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
m
25
h
B
H – Hex Head Screwlock F – Jackpost, Female
F G CODE H HEX HEAD SCREWLOCK
.32 (8.1) A
G
F
CODE F FEMALE JACKPOST
ØD
A Max.
09 15 21 25 31 37 51 51-2 67 69 100
B Max.
C
D
E Max.
CODE E EXTENDED SCREWLOCK
F Max.
G Max.
In.
mm.
In.
mm.
In.
mm.
In. ± .010
mm. ± 0.25
In.
mm.
In.
mm.
In.
mm.
.915 1.065 1.215 1.315 1.465 1.615 1.565 1.965 2.365 1.865 2.305
23.24 27.05 30.86 33.40 37.21 41.02 39.75 48.91 60.07 47.37 58.55
.450 .450 .450 .450 .450 .450 .495 .450 .450 .495 .540
11.43 11.43 11.43 11.43 11.43 11.43 12.57 11.43 11.43 12.57 13.72
.565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
.160 .190 .220 .260 .275 .285 .350 .285 .350 .350 .490
4.06 4.83 5.59 6.60 6.99 7.24 8.89 7.24 8.89 8.89 12.45
1.033 1.096 1.127 1.190 1.221 1.283 1.346 1.346 1.346 1.346 1.408
26.24 27.84 28.63 30.23 31.01 32.59 34.19 34.19 34.19
.721 .783 .815 .877 .908 .971 1.033 1.033 1.033 1.033 1.096
18.31 19.89 20.70 22.28 23.06 24.66 26.24 26.24 26.24
.554 .617 .649 .711 .722 .785 .867 .867 .867 .867 .930
14.07 15.67 16.48 18.06 18.34 19.94 22.02 22.02 22.02
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
34.19 35.76
U.S. CAGE Code 06324
26.24 27.83
22.02 23.62
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-9 E-Mail:
[email protected]
K L M N P Q INDEX
E
Size
H J
C
CODE B FILLISTER HEAD JACKSCREW
D E
Z2 – Gold
Table I: Dimensions
B
B C
How To Order EMI/RFI Split Banding Backshell
Series
A
Micro-D Backshells
500-011 EMI/RFI Shield Sock Backshell Round Cable Entry
Shield Sock Backshells save assembly time. These backshells are terminated to tinned copper braid in whatever length you require.
A B
Available in Top, 45° and Side Entry, these backshells feature one piece construction and are available in a variety of plating finishes.
C
Precision Swaged Braid Termination adds mechanical strength and lowers resistance compared to hex crimps.
D E F G
How To Order Shield Sock EMI/RFI Backshells
Series Shell Finesh Connector Size Hardware Option
H J K
500T011
Sample Part Number
Cable Entry Code
L M N
Length of Braid
P
500T011 Top Entry
INDEX © 2013 Glenair, Inc.
25
h
08
-12
500T011 - Top Entry 500S011 - Side Entry 500E011 - 45° Entry (See Table I) E – Chem Film (Alodyne) J – Cadmium, Yellow Chromate M – Electroless Nickel NF – Cadmium, Olive Drab Z2 – Gold 09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table III) B - Fillister Head Jackscrew H - Hex Head Jackscrew E - Extended Jackscrew F - Jackpost, Female (See Table II) 04 - .125 (3.2) 05 - .156 (4.0) 06 - .188 (4.8) 07 - .219 (5.6) 08 - .250 (6.4) 09 - .281 (7.1) 10 - .312 (7.9) 11 - .344 (8.7) 12 - .375 (9.5) (See Table IV) Maximum Cable Entry Diameter per Shell Size and Style Size T Top Entry E 45° Entry S Side Entry 9 08 08 09 15 08 08 12 21 08 08 12 25 08 08 12 31 09 09 12 37 09 09 12 51 10 10 12 51-2 09 09 12 67 09 09 12 69 10 10 12 100 12 12 12 Length in One Inch Increments - Example: “12” equals twelve inches.
Table I: Entry Styles
Q
m
500S011 Side Entry
500E011 45° Entry
Material and Finish
• Shell: Aluminum Alloy 6061 -T6 Per QQ-A-200, QQ-A-225 (Machined Components) Aluminum Alloy 6061-T6 Per QQ-A-591 (A380) (Die-Cast Components) • Braid: Tinned Copper Braid Per QQ-B-575 ASTM B33, #36 AWG Strands, 90% Coverage • Crimp Ring: Copper, Tin Plated • Clips, E-Rings: 17-7PH Stainless Steel • Jackscrews, Washers, Jackposts: 300 Series Stainless Steel, Passivated
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-10 E-Mail:
[email protected]
Micro-D Backshells
500-011 EMI/RFI Shield Sock Backshell Round Cable Entry
Table II: Hardware Options
B - Fillister Head Jackscrew
A
E - Extended Jackscrew (Not for 45° Entry)
H - Hex Head Jackscrew
B
F - Jackpost, Female
C
Table III: Dimensions
D C
E G F
B
M N
A
E - 45º ENTRY
SHOWN WITH H HEX HEAD JACKSCREW
Table IV: Cable Entry Code Cable Entry Code
F
G Max.
In. mm. ± .010 ± 0.25
In.
mm.
.125 .156 .188
3.18 3.96 4.78
.310 .350 .380
7.87 8.89 9.65
07 08 09 10 11 12
.219 .250 .281 .312 .344 .375
5.56 6.35 7.14 7.92 8.74 9.53
.400 .425 .450 .500 .525 .550
10.16 13.31 11.43 12.70 13.34 13.97
A Max. In. mm. 09 .850 21.59 15 1.000 25.40 21 1.150 29.21 25 1.250 31.75 31 1.400 35.56 37 1.550 39.37 51 1.500 38.10 51-2 1.910 48.51 67 2.310 58.67 69 1.810 45.97 100 2.235 56.77
B Max. In. mm. .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .410 10.41 .370 9.40 .370 9.40 .410 10.41 .460 11.68
C In. mm. .565 14.35 .715 18.16 .865 21.97 .965 24.51 1.115 28.32 1.265 32.13 1.215 30.86 1.615 41.02 2.015 51.18 1.515 38.48 1.800 45.72
.175 (4.4)
H
T - TOP ENTRY
SHOWN WITH B FILISTER HEAD JACKSCREW
L
CONNECTOR ORDERED SEPARATELY
J
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
D Max. In. mm. .780 19.81 .910 23.11 1.030 26.16 1.090 27.69 1.150 29.21 1.190 30.23 1.220 30.99 1.220 30.99 1.220 30.99 1.220 30.99 1.280 32.51
E Max. In. mm. .410 10.41 .580 14.73 .740 18.80 .850 21.59 .980 24.89 1.130 28.70 1.080 27.43 1.510 38.35 1.880 47.75 1.380 35.05 1.470 37.34
H Max. In. mm. .350 8.89 .470 11.94 .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .780 19.81 .780 19.81 .780 19.81 .840 21.34
J Max. In. mm. .637 16.18 .673 17.09 .707 17.95 .748 19.00 .756 19.20 .774 19.66 .859 21.82 .859 21.82 .859 21.82 .859 21.82 1.014 25.76
K
K In. .435 .440 .458 .483 .476 .478 .548 .548 .548 .548 .687
mm. 11.05 11.20 11.63 12.27 12.09 12.14 13.91 13.91 13.91 13.91 17.45
J
S - SIDE ENTRY
K
CONNECTOR ORDERED SEPARATELY
L
SHOWN WITH E EXTENDED JACKSCREW
L Max. In. mm. 1.040 26.42 1.170 29.72 1.290 32.77 1.350 34.29 1.420 36.07 1.450 36.83 1.480 37.59 1.480 37.59 1.480 37.59 1.480 37.59 1.580 40.13
M Max. In. mm. 1.000 25.40 1.030 26.16 1.050 26.67 1.090 27.69 1.130 28.70 1.230 31.24 1.250 31.75 1.250 31.75 1.250 31.75 1.250 31.75 1.320 33.53
N Max. In. mm. .680 17.27 .730 18.54 .765 19.43 .830 21.08 .890 22.61 .955 24.26 1.005 25.53 1.005 25.53 1.005 25.53 1.005 25.53 1.080 27.43
M N P Q INDEX
Size
H
D
04 05 06
F G
CONNECTOR ORDERED SEPARATELY
.50 (12.7) MAX.
E
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-11 E-Mail:
[email protected]
Micro-D Backshells
507-088 Composite EMI/RFI Banding Backshell Round Cable Entry
Save Weight and Eliminate Corrosion Damage with composite Micro-D backshells. These round cable entry backshells are injectionmolded with high strength Ultem 2300 fiberglass-reinforced thermoplastic.
A B
Choose Top, Side or 45° Cable Entry.
C
Electroless Nickel Plated for excellent EMI shielding effectiveness.
D E F G
How To Order EMI/RFI Banding Backshells 507T088
Sample Part Number Series
507T088 - Top Entry 507S088 - Side Entry 507E088 - 45° Entry (See Table II)
Shell Finish
XM - Electroless Nickel
Connector Size
09, 15, 21, 25, 31, 37 51, 100 (See Table III)
Hardware Option
B – Fillister Head Jackscrew E – Extended Jackscrew (Not Available for 45° Cable Entry)
Cable Entry Code
04 – .125 (3.2) 05 – .156 (4.0) 06 – .188 (4.8) 07 – .219 (5.6) 08 – .250 (6.4) 09 – .281 (7.1) 10 – .312 (7.9) 11 – .344 (8.7) 12 – .375 (9.5) (See Table IV)
H J K
N
H – Hex Head Jackscrew F - Jackpost, Female
25
h
08
(See Table I)
aximum Cable Entry Per Entry Style and Shell Size Selections M Size T Top Entry E 45° Entry S Side Entry 9 08 08 09 15 08 08 12 21 08 08 12 25 08 08 12 31 09 09 12 37 09 09 12 51 10 10 12 100 12 12 12
Table I: Hardware Option
L M
xm
B - Fillister Head Jackscrew
E - Extended Jackscrew (Not for 45° Entry)
H - Hex Head Jackscrew
Table II: Entry Styles 507T088 Top Entry
507S088 Side Entry
507E088 45° Entry
P
F - Jackpost, Female
Materials
• Shell: Ultem 2300 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-12 E-Mail:
[email protected]
Micro-D Backshells
507-088 Composite EMI/RFI Banding Backshell Round Cable Entry
Table III: Dimensions
A
E G F
B C
.32 (8.1) D
C
T - TOP ENTRY
.175 (4.4) B
M H
N
SHOWN WITH H HEX HEAD JACKSCREW AND F FEMALE POST
SHOWN WITH B FILLISTER HEAD JACKSCREW
A
E - 45º ENTRY
CONNECTOR ORDERED SEPARATELY
E
CONNECTOR ORDERED SEPARATELY
#2-56 UNC THDS. 9-51 PIN #4-40 UNC THDS. 100 PIN
F
Table IV: Cable Entry Codes Cable Entry Code
F
A Max. In. mm. 09 .850 21.59 15 1.000 25.40 21 1.150 29.21 25 1.250 31.75 31 1.400 35.56 37 1.550 39.37 51 1.500 38.10 100 2.235 56.77
L
mm. ± 0.25
In.
mm.
.125 .156 .188 .219 .250 .281 .312 .344 .375
3.18 3.96 4.78 5.56 6.35 7.14 7.92 8.74 9.53
.219 .250 .281 .313 .344 .375 .406 .438 .469
5.56 6.35 7.14 7.95 8.74 9.53 10.31 11.13 11.92
04 05 06 07 08 09 10 11 12
Size
G
In. ± .010
B Max. In. mm. .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .410 10.41 .460 11.68
C In. .565 .715 .865 .965 1.115 1.265 1.215 1.800
mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72
D Max. In. mm. .780 19.81 .790 20.07 .910 23.11 .970 24.64 1.030 26.16 1.070 27.18 1.100 27.94 1.160 29.46
E Max. In. mm. .410 10.41 .580 14.73 .740 18.80 .850 21.59 .980 24.89 1.130 28.70 1.080 27.43 1.470 37.34
D
J
K
G
S - SIDE ENTRY
H
CONNECTOR ORDERED SEPARATELY
J
SHOWN WITH E EXTENDED JACKSCREW
K H Max. In. mm. .460 8.89 .470 11.94 .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .810 21.34
J Max. In. mm. .680 17.27 .730 18.54 .765 19.43 .830 21.08 .890 20.32 .955 24.26 1.005 25.53 1.080 27.43
K In. .435 .440 .458 .483 .476 .478 .548 .687
mm. 11.05 11.2 11.63 12.27 12.09 12.14 13.91 17.45
L Max. In. mm. 1.040 26.42 1.170 29.72 1.290 32.77 1.350 34.29 1.420 36.07 1.450 36.83 1.480 37.59 1.580 40.13
M Max. In. mm. 1.000 25.40 1.030 26.16 1.050 26.67 1.090 27.69 1.130 28.70 1.230 31.24 1.250 31.75 1.320 33.53
N Max. In. mm. .680 17.27 .730 18.54 .765 19.43 .830 21.08 .890 22.61 .955 24.26 1.005 25.53 1.080 27.43
L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-13 E-Mail:
[email protected]
Micro-D Backshells
500-047 EMI/RFI Elliptical Banding Backshell Elliptical Backshells provide extra room for large wire bundles. This one piece version features an oversize shield termination area for both standard and micro BandMaster™ ATS shield termination straps.
A B C
Materials
• Shell: Aluminum Alloy • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
How To Order EMI/RFI Elliptical Backshells 500-047
D
Sample Part Number Series
500-047
E
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel
Connector Size
09, 15, 21, 25, 31, 37 51, 51-2, 67, 69, 100 (See Table I)
F
Hardware Option
B – Fillister Head Jackscrew E – Extended Jackscrew
EMI Band Strap Option
Omit (Leave Blank) – Band Not Included B – Standard Band .250" Wide, uncoiled M – Micro Band .125" Wide, uncoiled
Qwik-Ty Option
T – with Qwik-Ty Omit for none
G
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
m
H – Hex Head Jackscrew F – Jackpost, Female
(See Table I)
Hardware Option
B
B - Fillister Head Jackscrew
C
J THREAD - TYP
.175
.30
H - Hex Head Jackscrew A
G
CONNECTOR SHOWN FOR REFERENCE ONLY
D
E - Extended Jackscrew
M
Q
CONFIGURATION MFR OPTION APPLY TO MALE JACKSCREW
RETAINING CLIP
K
P
T
Table I: Dimensions
J
N
h
Z2 – Gold
H
L
25
JACKSCREW F
H
Size
INDEX
09 15 21 25 31 37 51 51-2 69 100
A In. .775 .925 1.075 1.175 1.325 1.475 1.425 1.835 1.730 2.160
B mm. 19.69 23.50 27.31 29.85 33.66 37.47 36.20 46.61 43.94 54.86
© 2013 Glenair, Inc.
In. .34 .34 .34 .34 .34 .34 .38 .34 .40 .43
C mm. 8.64 8.64 8.64 8.64 8.64 8.64 9.65 8.64 10.16 10.92
In. .75 .88 1.00 1.06 1.12 1.16 1.19 1.19 1.19 1.25
mm. 19.05 22.35 25.40 26.92 28.45 29.46 30.23 30.23 30.23 31.75
QWIK-TY SYM T
E
D Dia In. mm. .312 7.92 .420 10.67 .590 14.99 .690 17.53 .820 20.83 .970 24.64 .920 23.37 1.030 26.16 1.190 30.23 1.290 32.77
E Dia In. mm. .281 7.14 .281 7.14 .281 7.14 .281 7.14 .281 7.14 .281 7.14 .312 7.92 .281 7.14 .312 7.92 .360 9.14
High Performance Micro-D Connectors and Cables
F - Jackpost, Female
F In. .32 .44 .56 .62 .68 .72 .75 .75 .75 .81
G mm. 8.13 11.18 14.22 15.75 17.27 18.29 19.05 19.05 19.05 20.57
In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 1.515 1.800
mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 38.48 45.72
H Ref. In. mm. .154 3.91 .154 3.91 .154 3.91 .154 3.91 .154 3.91 .154 3.91 .154 3.91 .154 3.91 .154 3.91 .184 4.67
U.S. CAGE Code 06324
J Thread 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 4-40 UNC-2A
Rev. 07.25.16 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-14 E-Mail:
[email protected]
Micro-D Backshells
507-175 Straight, Top, and 45° Entry EMI/RFI Elliptical Banding Backshell
17-7PH Stainless Steel Clips attach the backshell to the connector. These backshells accept standard and micro BandMaster™ ATS shield termination straps.
A
Straight, 45° and Right Angle elliptical backshell provides plenty of working room for complicated wiring situations.
B
Rugged One-Piece Aluminum Shell with stainless steel hardware, available in standard nickel plating, or choose optional finishes.
C D
How To Order EMI/RFI Elliptical Backshells 507E175
Sample Part Number Series
507T175 - Top Entry 507S175 - Side Entry 507E175 - 45° Side Entry (See Table I)
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel
Connector Size
09, 15, 21, 25, 31, 37 51, 51-2, 67, 69, 100 (See Table III)
Cable Entry Code
01, 02, 03, 04, 05, 06, 07, 08 (See Table IV)
Hardware Option
OMIT (Leave Blank) – Fillister Head Jackscrew E – Extended Jackscrew
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
507S175 Side Entry
25
04
Z2 – Gold
H – Hex Head Jackscrew F - Jackpost, Female
Table I: Entry Styles 507T175 Top Entry
m
(See Table II)
(See Ordering Info For Finish Options) • Shell: Aluminum Alloy 6061 -T6 Per QQ-A-200, QQA-225 (Machined Components) • Aluminum Alloy 6061-T6 Per QQ-A-591 (A380) (DieCast Components) • Clips: 17-7PH Stainless Steel • Jackscrews, Washers, Jackposts: 300 Series Stainless Steel, Passivated
H - Hex Head Jackscrew
H J K L M
Table II: Hardware Option
B - Fillister Head Jackscrew
F G
Materials
507E175 45° Entry
E
E - Extended Jackscrew (Not for 45° Entry)
N F - Jackpost, Female
P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-15 E-Mail:
[email protected]
Micro-D Backshells
507-175 Straight, Top, and 45° Entry EMI/RFI Elliptical Banding Backshell
Table III: Dimensions
A
B
B C
E
.32 (8.1)
D
A
C
H J K L M N P
L K H
.175 (4.4)
CONNECTOR ORDERED SEPARATELY
E G
J
F
D F
G
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
Table IV: Cable Entry Sizes Cable Entry Code 01 02 03 04 05 06 07 08
Size 09 15 21 25 31 37 51 51-2 67 69 100
D
E
Available on Shell Size
In. mm. In. mm. ± .010 ± 0.25 ± .010 ± 0.25 .344 .494 .644 .744 .894 .994 1.044 1.024
8.74 12.55 16.36 18.90 21.34 25.25 26.52 26.01
A Max. In. mm. .850 21.59 1.000 25.40 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77
.290 .290 .290 .304 .304 .304 .304 .384
7.37 7.37 7.37 7.72 7.72 7.72 7.72 9.75
09 Thru 100 15 Thru 100 21 Thru 100 25 Thru 100
STANDARD FILLISTER HEAD JACKSCREW
31 Thru 100 37 Thru 100
CODE H HEX HEAD JACKSCREW
CODE F FEMALE JACKPOST
CODE E EXTENDED JACKSCREW
37 and 100 100
B Max. In. mm. .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .410 10.41 .370 9.40 .370 9.40 .410 10.41 .460 11.68
C In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
F Max. In. mm. .782 19.86 .832 21.13 .882 22.40 .932 23.67 .972 24.69 .972 24.69 1.092 27.74 1.092 27.74 1.092 27.74 1.092 27.74 1.157 29.39
G Max. In. mm. .970 24.64 .970 24.64 .970 24.64 .990 25.15 .990 25.15 .990 25.15 1.030 26.16 1.030 26.16 1.030 26.16 1.030 26.16 1.090 27.69
H Max. In. mm. .668 16.97 .668 16.97 .668 16.97 .678 17.22 .678 17.22 .678 17.22 .698 17.73 .698 17.73 .698 17.73 .698 17.73 .723 18.36
J Max. In. mm. .673 17.09 .673 17.09 .673 17.09 .700 17.78 .700 17.78 .700 17.78 .758 19.25 .758 19.25 .758 19.25 .758 19.25 .824 20.93
K Max. In. mm. .851 21.62 .876 22.25 .901 22.89 .943 23.95 .963 24.46 .983 24.97 1.050 26.67 1.050 26.67 1.050 26.67 1.050 26.67 1.130 28.70
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-16 E-Mail:
[email protected]
Micro-D Backshells
507-297 Side Entry EMI/RFI Lightweight Metal Backshell MIL-DTL-83513
EMI/RFI Lightweigth Metal Shell Connectors provide rugged aluminum housing with stainless steel hardware, available in standard nickel plating, or choose optional finishes. Terminate cable shields with BandMaster™ ATS micro bands. This backshell features floating male screwlocks which allow full mating of the connector before the screws are fastened.
A B C D E
How To Order EMI/RFI Lightweight Backshells 507E297
Series
Finish Code
Shell Size
m
25
d
h
l
507E297 - End Entry Style (45) A - Cadmium Plate/Bright Dip B - Cadmium Plate/Olive Drab B1 - Cadmium Plate/Olive Drab Type II Class 1 J - Gold Iridite Over Cadmium Plate Over Nickel M - Electroless Nickel N - Cadmium Plate/Olive Drab Over Nickel NF - Cad/O.D. Over Electroless Nickel (1000 Hour Salt Spray) T - Cadmium Plate/Bright Dip Over Nickel Z2 - Gold Plate 09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100 (See Table I)
Max Entry Code
Max Entry Code A B C D E F G H J K L
Hardware Option
B - Fillister Head Jackscrew
H - Socket Head Jackscrew
F - Female Jackpost
EMI Band Strap Option
Omit (Blank) - No Band
M - Uncoiled .125" Wide Band
L - Coiled .125" Wide Band
G H J
H Ø Available Sizes .188 09 Thru 100 .230 15 Thru 100 .265 21 Thru 100 .335 25 Thru 100 .360 31 Thru 100 .410 37 Thru 100 .520 51 Thru 100 .585 51-2 Thru 100 .665 67 Thru 100 .720 67 and 100 .760 67
K L M N
Notes
1. Assembly Identified With Manufacturer's 2. Name and P/N, Space Permitting.
Material/Finish
• Backshell - al alloy / see Table 2 • Hardware - cres / passivated. • See 507-296 for straight & 90° configurations.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
F
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-17 E-Mail:
[email protected]
P Q INDEX
Sample Part Number
Micro-D Backshells
507-297 EMI/RFI Lightweight Metal Backshell MIL-DTL-83513
Table I: Dimensions
A B C D
Code H Socket Head Jackscrew
Code B Fillister Head Jackscrew
Code F Female Jackpost
Hardware Mounting Options
E G Diameter
B
F G
H Diameter (See How To Order Table)
.320
H J K L
E D Code H Hardware Shown
2-56 (Sizes 09-69) 4-40 (Size 100)
M N P Q
F
C
Connector Shown For Reference Only
A
Size
INDEX
09 15 21 25 31 37 51 51-2 67 69 100
A in 0.775 0.925 1.075 1.175 1.325 1.475 1.425 1.825 2.225 1.725 2.160
B mm 19.69 23.50 27.31 29.85 33.66 37.47 36.20 46.36 56.52 43.82 54.86
© 2013 Glenair, Inc.
in 0.340 0.370 0.340 0.340 0.340 0.340 0.380 0.340 0.340 0.380 0.430
C mm 8.64 9.40 8.64 8.64 8.64 8.64 9.65 8.64 8.64 9.65 10.92
in 0.565 0.715 0.865 0.965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
D mm 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
in 0.500 0.560 0.660 0.730 0.810 0.890 0.900 1.030 1.030 1.050 1.100
E mm 12.70 14.22 16.76 18.54 20.57 22.61 22.86 26.16 26.16 26.67 27.94
in 0.700 0.760 0.860 0.930 1.010 1.090 1.100 1.230 1.230 1.250 1.300
High Performance Micro-D Connectors and Cables
F mm 17.78 19.30 21.84 23.62 25.65 27.69 27.94 31.24 31.24 31.75 33.02
in 0.440 0.590 0.740 0.840 0.990 1.140 1.090 1.490 1.890 1.390 1.522
G mm 11.18 14.99 18.80 21.34 25.15 28.96 27.69 37.85 48.01 35.31 38.66
in 0.250 0.250 0.250 0.250 0.290 0.250 0.250 0.290 0.340
mm 6.35 6.35 6.35 6.35 7.37 6.35 6.35 7.37 8.64
U.S. CAGE Code 06324
in .188 .230 .265 .335 .360 .410 .520 .585 .665 .720 .760
mm 4.78 5.84 6.73 8.51 9.14 10.41 13.21 14.86 16.89 18.29 19.30
Max Entry A B C D E F G H J K L
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-18 E-Mail:
[email protected]
Micro-D Backshells
507-296 EMI/RFI Elliptical Lightweight Metal Backshell MIL-DTL-83513
EMI/RFI Elliptical Lightweight Metal Shell Backshells provides added room for larger wire bundles. Terminate cable shields with BandMaster™ ATSmicrobands. This backshell features floating male screwlocks which allow full mating of the connector before the screws are fastened. Rugged Aluminum housing with stainless steel hardware, available in standard nickel plating, or choose optional finishes.
Series
Finish Symbol
Shell Size
Entry Code
Hardware Option EMI Band Strap Option
D 507T296
m
25
d
h
l
507T296 - Top Entry (Straight) 507S296 - Side Entry (90°) A - Cadmium Plate/Bright Dip B - Cadmium Plate/Olive Drab B1 - Cadmium Plate/Olive Drab Type II Class 1 J - Gold Iridite Over Cadmium Plate Over Nickel M - Electroless Nickel N - Cadmium Plate/Olive Drab Over Nickel NF - Cad/O.D. Over Electroless Nickel (1000 Hour Salt Spray) T - Cadmium Plate/Bright Dip Over Nickel Z2 - Gold Plate
G H J
Code G Available Sizes A 0.320 09 Thru 100 B 0.470 15 Thru 100 C 0.620 21 Thru 100 D 0.720 25 Thru 100 E 0.870 31 Thru 100 F 0.970 37 Thru 100 G 1.020 37 & 51-2 Thru 100 H 1.270 51-2 Thru 100 J 1.360 51-2, 67 & 100 K 1.770 67 B - Fillister Head Jackscrew H - Socket Head Jackscrew E - Extended Jackscrew F - Female Jackpost M - Uncoiled .125" Wide Band
K L M L - Coiled .125" Wide Band
N
Notes
1. Assembly identified with manufacture's name and P/N, space permitting. 2. See 507-297 for 45° configuration 3. Symbol 'E' extended hardware is not to be used with straight backshell at max cable entry size.
• Backshell - al alloy/see Table 2 • Hardware-cres/pasivated
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
P Q INDEX
Material/Finish
© 2013 Glenair, Inc.
E F
09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100 (See Table I)
Omit (Blank) - No Band
B C
How To Order EMI/RFI Metal Shell Backshells Sample Part Number
A
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-19 E-Mail:
[email protected]
Micro-D Backshells
507-296 EMI/RFI Lightweight Metal Backshell MIL-DTL-83513
Table I: Dimensions
A
Hardware Mounting Options
B C D
Code B Fillister Head Jackscrew
E
A E
C E
P Q
G
B
F
.320(8.13)
.320 (8.128)
F
D
D
Connector Shown For Ref Only
Connector Shown For Reference Only
Symbol H Hardware Shown
Size
INDEX
09 15 21 25 31 37 51 51-2 67 69 75 100
B
C
G
L N
Style T
Top Entry (Straight)
A
H
M
Code E Hardware (See Note 3)
Side Entry (90°)
G
K
Code F Female Jackpost
Style S
F
J
Code B Fillister Head Jackscrew
A in 0.775 0.925 1.075 1.175 1.325 1.475 1.425 1.825 2.225 1.725 2.070 2.160
© 2013 Glenair, Inc.
B mm 19.69 23.50 27.31 29.85 33.66 37.47 36.20 46.36 56.52 43.82 52.58 54.86
in 0.340 0.340 0.340 0.340 0.340 0.340 0.380 0.340 0.340 0.380 .380 0.430
C mm 8.64 8.64 8.64 8.64 8.64 8.64 9.65 8.64 8.64 9.65 9.65 10.92
in 0.565 0.715 0.865 0.965 1.115 1.265 1.215 1.615 2.015 1.515 1.705 1.800
D mm 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 43.30 45.72
in 0.520 0.520 0.520 0.520 0.520 0.520 0.610 0.520 0.520 0.610 .520 0.630
High Performance Micro-D Connectors and Cables
2-56 (Sizes 09-69) 4-40 (Size 100)
E mm 13.21 13.21 13.21 13.21 13.21 13.21 15.49 13.21 13.21 15.49 13.20 16.00
in 0.440 0.590 0.740 0.840 0.990 1.140 1.090 1.490 1.890 1.390 1.490 1.522
F mm 11.18 14.99 18.80 21.34 25.15 28.96 27.69 37.85 48.01 35.31 37.85 38.66
in 0.250 0.250 0.250 0.250 0.250 0.250 0.290 0.250 0.250 0.290 .290 0.340
U.S. CAGE Code 06324
mm 6.35 6.35 6.35 6.35 6.35 6.35 7.37 6.35 6.35 7.37 7.37 8.64
Max Entry A B C D E G F J K H H J Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-20 E-Mail:
[email protected]
Micro-D Backshells
507-178 EMI/RFI Micro-D Split Banding Backshell with Eliptical Banding Porch
Split Backshell With Elliptical Cable Entry provides added room for larger wire bundles. Terminate cable shields with BandMaster™ ATS microbands. This backshell features floating male screwlocks which allow full mating of the connector before the screws are fastened. Rugged Aluminum housing with stainless steel hardware, available in standard nickel plating, or choose optional finishes.
How To Order EMI/RFI Split Shell Backshells 507-178
Sample Part Number Series
507-178
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel Z2 – Gold
Connector Size
09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table I)
Cable Entry Code
04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16 (See Table II)
EMI Band Strap Option
OMIT (Leave Blank) - Band Strap Not Supplied B - Microband Supplied (600-057) K - Coiled Microband Supplied (600-057-1)
Hardware Option
E - Extended Screwlock FE - Extended Female Jackpost HJ - Hex Head Jackscrew
m
25
06
k
f
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
F - Jackpost, Female FF - Fixed Female Jackpost EJ - Extended Jackscrew
H - Hex Head Screwlock J - Fillister Head Jackscrew OMIT for standard knurl head screwlock
Notes
1. Assembly Identified with manufacturer's name and P/N space permitting. 2. Use Glenair 600-057 ban and 600-01 tool. 3. Screwlocks: screws float to allow connctor to engage completely before tightening. Jackscrews: screws must be tightened simultaneous with connector engagement 4. Shell size 09 may be supplied with optional configuration J dimension of 1.140 max.
Materials/Finish
• Shell: Aluminum Alloy • Jackscrews, Washers, Jackposts: 300 Series Stainless Steel, Passivated • See Ordering Info For Finish Options
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-21 E-Mail:
[email protected]
M
Micro-D Backshells
507-178 EMI/RFI Micro-D Split Banding Backshell with Eliptical Banding Porch
Table I: Dimensions .187 (4.75) REF
A
H
Table II: Cable Entry Code
.06 (1.5) MIN
H Code 04 05 06 07 08 09 10 11 12 13 14 15 16
.130 (3.30)
E D
Typical Jackscrew G Thread Typ
Connector Shown For Reference Only
.187(4.75) Ref .06(1.52) Min
Optional Configuration Shell Size 09 See Note 4 A
In. ± .010 .250 .312 .375 .437 .500 .562 .625 .688 .750 .812 .875 .938 1.000
mm. ± 0.25 6.35 7.92 9.53 11.10 12.70 14.27 15.88 17.48 19.05 20.62 22.23 23.83 25.40
Available on Shell Size 09, 15, 21 15 Thru 31 21 Thru 51 25 Thru 51 25 Thru 51 31 Thru 100 31 Thru 100 37 Thru 100 37 Thru 100 37,51-2,67,69,100 51-2, 67, 69, 100 51-2, 67, 69, 100 51-2, 67, 69, 100
.130(3.30)
F C B J
M
A Max.
09 15 21 25 31 37 51 51-2 67 69 100
B
C Max.
D
In.
mm.
In.
mm.
In.
mm.
In. ± .010
.915 1.065 1.215 1.315 1.465 1.615 1.565 1.965 2.365 1.865 2.305
23.24 27.05 30.86 33.40 37.21 41.02 39.75 49.91 60.07 47.37 58.55
.565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
.450 .450 .450 .450 .450 .450 .495 .450 .450 .495 .540
11.43 11.43 11.43 11.43 11.43 11.43 12.57 11.43 11.43 12.57 13.72
.701 .763 .795 .857 .888 .951 1.013 1.013 1.013 1.013 1.076
© 2013 Glenair, Inc.
See Note 2
Code H Hex Socket Head Jackscrew
Code F Female Jackpost
Size
Code K EMI Band Strap
Detail A - Extended Jackscrew detail for shell size 09
See Note 4
Code FF Fixed Female Jackpost E
F
mm. ± 0.25
In. ± .020
mm. ±.022
In. ± .005
mm. ± .127
G Thread
Available Dash No. Table III
17.81 19.38 20.19 21.77 22.56 24.16 25.73 25.73 25.73 25.73 27.33
1.013 1.076 1.107 1.170 1.201 1.263 1.326 1.326 1.326 1.326 1.388
25.73 27.33 28.12 29.72 30.51 32.08 33.68 33.68 33.68 33.68 35.26
.160 .190 .220 .260 .275 .285 .350 .350 .350 .350 .490
4.06 4.83 5.59 6.60 6.99 7.24 8.89 8.89 8.89 8.89 12.45
2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 4-40 UNC-2A
04 04-05 04-06 05-08 05-10 06-13 06-12 13-16 13-16 13-16 09-16
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-22 E-Mail:
[email protected]
Micro-D Backshells
507-198 Saddle Bar Strain-Relief Backshell 507-198 Strain Relief Backshells feature saddle bar cable clamps for easy installation.
Materials
• Shell: Aluminum Alloy 6061 -T6 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
507-198
Sample Part Number 507-198
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel Z2 – Gold
Connector Size
09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table I)
m
25
F G
D B
H
.312 (7.9)
J
1.25 (31.8) MAX. A E .031 (0.8) SILICONE PAD 2 PLCS.
09 15 21 25 31 37 51 51-2 67 69 100
A Max. In. mm. .850 21.59 1.000 25.40 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77
© 2013 Glenair, Inc.
.24 (6.1) WITH SADDLES CLOSED
B Max. In. .420 .420 .420 .420 .420 .420 .470 .420 .420 .470 .510
K
mm. 10.67 10.67 10.67 10.67 10.67 10.67 11.94 10.67 10.67 11.94 12.95
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
C In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
L
C
mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
High Performance Micro-D Connectors and Cables
D Max. In. mm. .840 21.34 .910 23.11 .970 24.64 1.030 26.16 1.080 27.43 1.130 28.70 1.080 27.43 1.480 37.59 1.880 47.75 1.380 35.05 1.650 41.91
E In. .31 .38 .44 .50 .55 .60 .55 .95 1.35 .85 1.00
F mm. 7.87 9.65 11.18 12.70 13.97 15.24 13.97 24.13 34.29 21.59 25.40
U.S. CAGE Code 06324
In. .31 .31 .31 .31 .31 .31 .36 .31 .31 .36 .40
mm. 7.87 7.87 7.87 7.87 7.87 7.87 9.14 7.87 7.87 9.14 10.04
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-23 E-Mail:
[email protected]
M N P Q INDEX
Size
D E
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
Table I: Dimensions
F
B C
How To Order Saddle Bar Strain Relief Backshells
Series
A
Micro-D Backshells
507-146 Round Cable Entry Strain Relief Backshell with Saddle Bar Clamps
A
507-146 Strain Relief Backshells feature saddle bar clamps for easy installation.
B
E-Rings attach the backshell to the Micro-D connector.
C D
507-146
Sample Part Number 507-146
E
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel
Connector Size
09, 15, 21, 25, 31, 37 51, 51-2, 67, 69, 100 (See Table I)
F
Hardware Option
OMIT – Fillister Head Jackscrew E – Extended Jackscrew
Jackscrew Attachment Option
OMIT (Leave Blank) – Jackscrews Attach With E-Ring. This Option Applies to Sizes 09 through 69. Size 100 is Not Available with E-Ring.
P Q
h
c
Z2 – Gold
C – "C" Clip
E
F
CODE B FILLISTER HEAD JACKSCREW
B
#4-40 THDS
ØD
A Max.
INDEX
09 15 21 25 31 37 51 51-2 67 69 100
C
In.
mm.
In.
mm.
In.
mm.
.915 1.065 1.215 1.315 1.465 1.615 1.565 1.965 2.365 2.265 2.305
23.24 27.05 30.86 33.40 37.21 41.02 39.75 49.81 60.07 57.53 58.55
.450 .450 .450 .450 .450 .450 .495 .450 .450 .495 .540
11.43 11.43 11.43 11.43 11.43 11.43 12.57 11.43 11.43 12.57 13.72
.565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
.160 .190 .220 .260 .275 .285 .350 .285 .285 .350 .490
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
CODE E EXTENDED JACKSCREW CODE F FEMALE JACKPOST
ALTERNATE CONFIGURATION
ØD In. ± .010
G
C CLIP
#2-56 THDS SIZE 09-69 # 4-40 THDS SIZE 100
B Max.
.26 (6.6)
.50 (12.7)
E-RING
Size
CODE H HEX HEAD JACKSCREW
.28 (7.1)
C
L N
25
H – Hex Head Jackscrew F – Jackpost, Female
A
J
M
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
m
Table I: Dimensions
H K
• Shell: Aluminum Alloy 6061 -T6 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
How To Order Round Cable Strain Relief Backshells
Series
G
Materials
E Max. mm. ± 0.25 4.06 4.83 5.59 6.60 6.99 7.24 8.89 7.24 7.24 8.89 12.45
F Max.
G Max.
In.
mm.
In.
mm.
In.
mm.
.780 .830 .940 .990 1.030 1.070 1.150 1.150 1.150 1.150 1.210
19.81 21.08 23.88 25.15 26.16 27.18 29.21 29.21 29.21
.550 .600 .650 .700 .740 .780 .860 .860 .860 .860 .930
13.97 15.24 16.51 17.78 18.80 19.81 21.84 21.84 21.84
.540 .590 .700 .740 .790 .830 .910 .910 .910 .910 .970
13.72 14.99 17.78 18.80 20.07 21.08 23.11 23.11 23.11
29.21 30.73
U.S. CAGE Code 06324
21.84 23.62
23.11 24.63
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-24 E-Mail:
[email protected]
Micro-D Backshells
500-012 Qwik-Ty Strain Relief Backshell Qwik-Ty Backshell is stocked in all sizes. Choose “M” Nickel Finish and “T” top entry for best availability. Customer-furnished cable ties provide strain relief to wire bundles. Suitable for jacketed cable or use with individual wires.
Materials
A
• Shell: Aluminum Alloy 6061 -T6 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
B C
How To Order Qwik-Ty Strain Relief Backshells 500t012
Sample Part Number Series
500T012 - Top Entry
500S012 - Side Entry
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel Z2 – Gold
Connector Size
09, 15, 21, 25, 31, 37 51, 51-2, 67, 69, 100 (See Table I)
Hardware Option
B – Fillister Head Jackscrew E – Extended Jackscrew
m
25
h
E
500E012 - 45° Entry
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
F
H – Hex Head Jackscrew F – Jackpost, Female
G
Table I: Dimensions
H
E B F
.175 (4.4)
C
A
F
L
T - TOP ENTRY H
J
S - SIDE ENTRY
K
SHOWN WITH B FILLISTER HEAD JACKSCREW
SHOWN WITH E EXTENDED JACKSCREW
SHOWN WITH H HEX HEAD JACKSCREW AND F FEMALE JACKPOST
CONNECTOR ORDERED SEPARATELY
CONNECTOR ORDERED SEPARATELY
CONNECTOR ORDERED SEPARATELY
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
A Max. Size 09 15 21 25 31 37 51 51-2 67 69 100
In.
mm.
.850 21.59 1.000 25.40 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77
B Max. In. .370 .370 .370 .370 .370 .370 .410 .370 .370 .410 .460
© 2013 Glenair, Inc.
mm.
E - 45º ENTRY
C In.
D Max. mm.
In.
mm.
E Max. In.
F
H Max.
In. mm. mm. In. ± .005 ± 0.13
9.40 .565 14.35 .780 19.81 .410 10.41 9.40 .715 18.16 .910 23.11 .580 14.73 9.40 .865 21.97 1.030 26.16 .740 18.80 9.40 .965 24.51 1.090 27.69 .850 21.59 9.40 1.115 28.32 1.150 29.21 .980 24.89 9.40 1.265 32.13 1.190 30.23 1.130 28.70 10.41 1.215 30.86 1.220 30.99 1.080 27.43 9.40 1.615 41.02 1.220 30.99 1.510 38.35 9.40 2.015 51.18 1.220 30.99 1.880 47.75 10.41 1.515 38.48 1.220 30.99 1.380 47.75 11.68 1.800 45.72 1.280 32.51 1.470 37.34
.156 .188 .219 .250 .265 .281 .312 ..281 .281 .312 .375
3.18 3.96 4.78 5.56 6.35 7.14 7.92 7.14 7.14 7.92 9.53
.350 .470 .590 .650 .710 .750 .780 .780 .780 .780 .840
High Performance Micro-D Connectors and Cables
mm.
J Max. In.
mm.
8.89 .637 16.18 11.94 .673 17.09 14.99 .707 17.95 16.51 .748 19.00 18.03 .756 19.20 19.05 .774 19.66 19.81 .859 21.82 19.81 .859 21.82 19.81 .859 21.82 19.81 .859 21.82 21.34 1.014 25.76
K In. .435 .440 .458 .483 .476 .478 .548 .548 .548 .548 .687
L Max. mm.
In.
mm.
J N
M
L
M Max.
N Max.
In.
In.
mm.
mm.
11.05 1.040 26.42 1.000 25.40 .680 17.27 11.20 1.170 29.72 1.030 26.16 .730 18.54 11.63 1.290 32.77 1.050 26.67 .765 19.43 12.27 1.350 34.29 1.090 27.69 .830 21.08 12.09 1.420 36.07 1.130 28.70 .890 22.61 12.14 1.450 36.83 1.230 31.24 .955 24.26 13.91 1.480 37.59 1.250 31.75 1.005 25.53 13.91 1.480 37.59 1.250 31.75 1.005 25.53 13.91 1.480 37.59 1.250 31.75 1.005 25.53 13.91 1.480 37.59 1.250 31.75 1.005 25.53 17.45 1.580 40.13 1.320 33.53 1.080 27.43
U.S. CAGE Code 06324
K
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-25 E-Mail:
[email protected]
M N P Q INDEX
.38 (9.65) D
D
Micro-D Backshells
507-035 Potting Shell Potting Shells provide easy encapsulation of Micro-D solder cup terminations. These potting shells provide .25 inches (6.3 mm.) of depth.
A B C
Materials
• Shell: Aluminum Alloy 6061 -T6 • Clips: 17-7PH Stainless Steel • Hardware: 300 Series Stainless Steel
How To Order Potting Shells 507-035
D
Sample Part Number Series
507-035
E
Shell Finish
E – Chem Film (Alodyne) M – Electroless Nickel
Connector Size
09, 15, 21, 25, 31, 37 51, 51-2, 67, 69, 100 (See Table I)
F
Hardware Option
Omit – Fillister Head Jackscrew E – Extended Jackscrew
J – Cadmium, Yellow Chromate NF – Cadmium, Olive Drab
M
25
H
Z2 – Gold
H – Hex Head Jackscrew F – Jackpost, Female
(See Table I)
Table I: Dimensions
G H
FILLISTER HEAD JACKSCREW A C
J K
.175 (4.4)
D E
B
CONNECTOR ORDERED SEPARATELY
.094 (2.4) RADIUS 4 PLCS.
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
L M N P Q
A Max. Size
INDEX
09 15 21 25 31 37 51 51-2 67 69 100
B Max.
C
D
In.
mm.
In.
mm.
In.
mm.
.850 1.000 1.150 1.250 1.400 1.550 1.500 1.910 2.310 1.810 2.235
21.59 25.40 29.21 31.75 35.56 39.37 38.10 48.51 58.67 45.97 56.77
.370 .370 .370 .370 .370 .370 .410 .370 .370 .410 .460
9.40 9.40 9.40 9.40 9.40 9.40 10.41 9.40 9.40 10.41 11.68
.565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
.31 .48 .65 .75 .88 1.03 .98 1.38 1.78 1.28 1.35
High Performance Micro-D Connectors and Cables
CODE E EXTENDED JACKSCREW
CODE F FEMALE JACKPOST
In. ± .030
© 2013 Glenair, Inc.
CODE H HEX HEAD JACKSCREW
.395 (9.27) MAX.
E mm. ± 0.8
In. ± .030
mm. ± 0.8
7.9 12.2 16.5 19.1 22.4 26.2 24.9 35.0 45.2 32.5 34.3
.26 .26 .26 .26 .26 .26 .30 .26 .26 .30 .36
6.6 6.6 6.6 6.6 6.6 6.6 7.6 6.6 6.6 7.6 9.1
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com M-26 E-Mail:
[email protected]
Micro-D Accessories
Section N Micro-D Sav-Con Connector Savers, Hardware and Accessories
Connector Saver Page N-2
Micro-D Connector Saver Always in stock,these feed-thru pin-socket adapters feature an innovative design using a single machined aluminum housing. Fully EMI protected, Uni-Savers protect expensive equipment from damage during testing and burn-in. Available in all sizes.
Gender Changer Page N-3
Micro-D In-line Gender Changers Mixed signal and power plug to receptacle gender changers feature feed-thru pin-socket adapters and provide a convenient solution to mis-matched cables.
Shorting Adapters Page N-4
Shorting Adapters Combining a switching backshell and a Micro-D connector, these assemblies have all contacts shorted to each other. These shorting plugs provide ESD protection to sensitive instrumentation.
Dust Caps Page N-5
Micro-D Plastic Dust Caps Always in stock,these anti-static black LDPE dust caps protect Micro-D connectors from debris and damage. All Glenair Micro-D connectors are furnished with these dust caps; however, these caps may be purchased separately for replacements.
Interfacial Seals Page N-5
Metal Covers Page N-6
Interfacial Seals Replace damaged Micro-D socket connector interfacial seals with new ones. Sometimes these seals can tear or be contaminated. Held in place by an interference fit with the contacts, damaged seals can be removed with tweezers. Micro-D Metal Protective Covers These aluminum covers provide complete mechanical and environmental protection. A silicone gasket assures water-tight sealing. A variety of attachment styles are available.
Rubber Covers Page N-10
Bean Rubber Covers For protection of Micro-D's used in tactical equipment, these synthetic rubber covers are friction-fit and attach with nylon cord and ring terminals.
Jackscrew Kits Page N-11
Jackscrew Kits These stainless steel kits are compatible with standard Micro-D connectors and meet the requirements of MIL-DTL-83513. Jackscrews are available with slot heads or hex heads. Choose low profile or extended length versions.
Jackpost Kits Page N-13
Jackpost Kits Jackposts are available in various lengths to fit front and rear panel mounted connectors. These stainless steel jackposts fit all standard Micro-D connectors.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-1 E-Mail:
[email protected]
A B C D E F G H J K L M N P Q INDEX
Product Selection Guide
Micro-D Accessories
Sav-Con® Connector Saver MWDM2L Materials & Finishes
Compact Size reduces stress on mating connectors. In Stock, No Waiting – All standard Uni-Saver sizes are in stock (9, 15, 21, 25, 31, 37, 51 and 100 pin). EMI Protected one piece shell.
Shell
Aluminum Alloy 6061 -T6 Electroless Nickel Plated
Contacts Encapsulant
Gold-Plated Copper Alloy Epoxy
Insulators
Glass-Filled LCP
Hardware
300 Series Stainless Steel, Passivated
Protect Expensive Equipment With Glenair's Micro-D Connector Saver These connector savers feature a one-piece aluminum housing, TwistPin contacts and locking hardware. Typical applications include test equipment and space-grade instruments. The Connector Saver prevents wear and tear on sensitive gear. Standard Connector Savers are electroless nickel plated. Other plating finishes are available on request. Dimensions
A
B
SOCKET
C
PIN
F
D
.500 (12.70)
E
A Max.
N
Size
Part Number
9 15 21 25 31
MWDM2L-9USP1 MWDM2L-15USP1 MWDM2L-21USP1 MWDM2L-25USP1 MWDM2L-31USP1
In.
19.94 23.75 27.56 30.01 33.91
C Max.
D Max.
K
#2-56 UNC Thds 9-69 Pin #4-40 Thds 100 Pin
E Max.
In.
mm.
In.
mm.
In.
F
H
J Max.
In. mm. In. mm mm. ± .003 ± 0.08 ±.003 ±.08
mm.
In.
mm.
8.46 12.27 16.08 18.62
.184 .184 .184 .184
4.67 4.67 4.67 4.67
22.43 26.24 24.97 35.15 45.31 32.61 35.13
.184 .184 .228 .184 .184 .228 .270
4.67 4.67 5.79 4.67 4.67 5.79 6.86
14.35 18.16 21.97 24.51 28.32
.400 .551 .701 .801 .951
10.16 14.00 17.81 20.35 24.16
.250 .250 .250 .250 .250
6.35 6.35 6.35 6.35 6.35
.308 .308 .308 .308 .308
7.82 7.82 7.82 7.82 7.82
.195 .195 .195 .195 .195
4.95 4.95 4.95 4.95 4.95
.183 .183 .183 .183 .183
4.65 4.65 4.65 4.65 4.65
.333 .483 .633 .733 .883
37 MWDM2L-37USP1 1.485 37.72 1.265 51 MWDM2L-51USP1 1.435 36.45 1.215 51-2 MWDM2L-51-2USP1 1.835 46.61 1.615 67 MWDM2L-67USP1 2.235 56.77 2.015 69 MWDM2L-69USP1 1.735 44.07 1.515 100 MWDM2L-100USP1 2.170 55.12 1.800
32.13 30.86 41.02 51.18 38.48 45.72
1.101 1.051 1.450 1.850 1.350 1.451
27.96 26.70 36.83 46.99 34.29 36.86
.250 .296 .250 .250 .296 .333
6.35 7.52 6.35 6.35 7.52 8.46
.308 7.82 .351 8.92 .308 7.82 .308 7.82 .351 8.92 .394 10.01
.195 .195 .195 .195 .195 .195
4.95 4.95 4.95 4.95 4.95 4.95
.183 .183 .183 .183 .183 .183
4.65 4.65 4.65 4.65 4.65 4.65
1.033 .983 1.384 1.784 1.284 1.383
Micro-D Connectors and Cables
U.S. CAGE Code 06324
Rev. 8/17
K Max
In.
.565 .715 .865 .965 1.115
© 2013 Glenair, Inc.
.785 .935 1.085 1.185 1.335
B
In . mm. mm. ±.003 ±0.08
H
J
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-2 E-Mail:
[email protected]
Micro-D Accessories
Sav-Con® Gender Changer Mixed Signal and Power Plug to Receptacle Gender Changer Sav-Con Gender Changers are the solution for mismatched cables. Available for power only or power and signal combinations in 9 insert arrangements.
How To Order Shorting Plugs
MRM17109
Sample Part Number Generic Part No.
-E112
-PR
-2
-B
Sav-Con Gender Changer
Insert Arrangement and Shell Size Sav-Con Gender
See Table I PR - Plug to Receptacle 1 - Cadmium 2 - Eelctroless Nickel 3 - Stainless Steel Passivated 4 - Black Anodize 5 - Gold 6 - Allochrome B - Though Hole P - Jackpost JP1 - Extended Jackpost (plug) JP2 - Extended jackpost (receptacle) JPL - Extended jackpost (supplied loose piece)
Shell Plating/Finish Hardware
Table I: Dimensions
A B C D
Hardware
E F
F (MAX)
H (MAX) JP1 = Extended Jackpost (plug)
G H
PLUG
J RECEPTACLE
JP2 = Extended Jackpost (receptacle)
L
.697(17.70) THROUGHOUT RANGE
Shell Size
MRM17109-B112PR MRM17109-D112PR MRM17109-D113PR MRM17109-E112PR MRM17109-E113PR MRM17109-G101PR MRM17109-G103PR MRM17109-G111PR MRM17109-J112PR
2 4 4 5 5 7 7 7 9
Power Contact Quantity 2 3 2 4 3 4 6 4 6
Micro Contact Quantity 0 0 6 0 8 22 6 20 0
F Max
M
H Max
In .
mm.
In.
mm.
0.257 0.257 0.257 0.257 0.257 0.306 0.306 0.306 0.257
6.53 6.53 6.53 6.53 6.53 7.77 7.77 7.77 6.53
13.97 20.32 20.32 24.13 24.13 26.67 26.67 26.67 36.83
0.550 0.800 0.800 0.950 0.950 1.050 1.050 1.050 1.450
P = Jackpost (plug and receptacle)
P Q
For Specific shell layout dimension data please refer to GDS162 © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
N
INDEX
Contact Arrangement
K
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-3 E-Mail:
[email protected]
Micro-D Accessories
Shorting Plug Assembly 177-007
A B C D E F G
177-007
Sample Part Number Series Connector Size Contact Type
P Q
-25
S
2
H
F
6
-06
P - Pin S - Socket 1 - Cadmium, Yellow Chromate 2 - Electroless Nickel 4 - Black Anodize 5 - Gold 6 - Chem Film B- Fillister Head Jackscrew H- Hex Head Jackscrew E - Extended Jackscrew F - Jackpost, Female N - No Hardware N - No Lanyard G - Flexible Nylon Rope F - Wire Rope, Nylon Jacket H - Wire Rope, Teflon Jacket Length in One Inch Increments; Example: “6” equals six inches. 01 - .140 (3.6) 04 - .197 (5.0) 05 - .167 (4.2) 06 - .125 (3.2) I.D. of Ring Terminal
Hardware Option Lanyard Option Lanyard Length Ring Terminal Ordering Code
Table I: Dimensions F B
LENGTH
SEE ORDERING INFO
D A
E
C
L N
Aluminum Alloy 6061 -T6 Gold-Plated Copper Alloy Epoxy Glass-Filled LCP Fluorosilicone 300 Series Stainless Steel, Passivated
177-007 9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (Table I)
Shell Finish
J
M
Shells Contacts Encapsulant Insulators Interfacial Seal Hardware
How To Order Shorting Plugs
H K
Materials & Finishes
Shorting Plug Assemblies are Micro-D connectors with all contacts bussed/shorted together. Enclosed in a backshell and fitted with jackscrews, these shorting plugs provide ESD protection to sensitive instrumentation.
CODE B CODE H FILLISTER HEAD HEX HEAD JACKSCREW JACKSCREW
#2-56 UNC THDS. 9-69 PIN #4-40 UNC THDS. 100 PIN
Size
INDEX
9 15 21 25 31 37 51 51-2 67 69 100
A Max. In. mm. .850 21.59 1.000 25.40 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77
© 2013 Glenair, Inc.
B Max. In . .370 .370 .370 .370 .370 .370 .410 .370 .370 .410 .460
mm. 9.40 9.40 9.40 9.40 9.40 9.40 10.41 9.40 9.40 10.41 11.68
C In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
High Performance Micro-D Connectors and Cables
D Max. In. mm. .600 15.24 .720 18.29 .840 21.34 .900 22.86 .960 24.38 1.000 25.40 1.030 26.16 1.030 26.16 1.030 26.16 1.030 26.16 1.090 27.69
CODE F FEMALE JACKPOST
CODE E EXTENDED JACKSCREW
E Max. In. .450 .570 .690 .750 .810 .850 .880 .880 .880 .880 .940
U.S. CAGE Code 06324
mm. 11.43 14.48 17.53 19.05 20.57 21.59 22.35 22.35 22.35 22.35 23.88
F Max. In. .410 .580 .740 .850 .980 1.130 1.080 1.510 1.880 1.380 1.470
mm. 10.41 14.73 18.80 21.59 24.89 28.70 27.43 38.35 47.75 35.02 37.34
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-4 E-Mail:
[email protected]
Micro-D Accessories
Anti-Static Thermoplastic Dust Caps and Fluorosilicone Interfacial Seals Anti-Static Dust Caps
Anti-Static Dust Caps offer protection to Micro-D connectors for storage and handling. Molded in black thermoplastic LDPE, these caps meet the anti-static decay rate specified in MIL-PRF-81705D. UL 94-V0 rated, self-extinguishing MWDM Connectors
MLDM and MWDL Connectors
Layout 9P 15P 21P 25P 31P 37P 51P 51-2P 67P 69P 75P 100P 130P 9S 15S 21S 25S 31S 37S 51S 51-2S 67S 69S
A Ref. In. mm. .524 13.31 .647 16.43 .824 20.93 .924 23.47 1.074 27.28 1.224 31.09 1.174 29.82 1.574 39.98 1.974 50.14 1.474 37.44 1.574 39.98 1.574 39.98 1.947 49.45 .563 14.30 .713 18.11 .863 21.92 .963 24.46 1.113 28.27 1.263 32.08 1.213 30.81 1.612 40.94 2.013 51.13 1.512 38.40
B Ref. In . mm. .393 9.98 .393 9.98 .393 9.98 .393 9.98 .393 9.98 .393 9.98 .393 9.98 .320 8.13 .250 6.35 .320 8.13 .436 11.07 .250 6.35 .476 12.09 .428 10.87 .428 10.87 .428 10.87 .428 10.87 .428 10.87 .428 10.87 .470 11.94 .428 10.87 .428 10.87 .470 11.94
000-01-75-163
75S
1.612 40.94
.470
11.94
000-01-00-163 000-01-30-163
100S 130S
1.615 41.02 1.975 50.16
.516 .504
13.11 12.80
Part Number 000-01-09-162 000-01-15-162 000-01-21-162 000-01-25-162 000-01-31-162 000-01-37-162 000-01-51-162 000-01-51-172 000-01-67-162 000-01-69-162 000-01-75-162 000-01-00-162 000-01-30-162 000-01-09-163 000-01-15-163 000-01-21-163 000-01-25-163 000-01-31-163 000-01-37-163 000-01-51-163 000-01-51-173 000-01-67-163 000-01-69-163
Part Number 000-01-09-164 000-01-15-164 000-01-21-164 000-01-25-164 000-01-31-164 000-01-37-164 000-01-51-164 000-01-09-165 000-01-15-165 000-01-21-165 000-01-25-165 000-01-31-165 000-01-37-165 000-01-51-165
Layout 9P 15P 21P 25P 31P 37P 51P 9S 15S 21S 25S 31S 37S 51S
A Ref. In. mm. .491 12.47 .639 16.23 .789 20.04 .889 22.58 1.039 26.39 1.189 30.20 1.139 28.93 .565 14.35 .715 18.16 .865 21.97 .965 24.51 1.115 28.32 1.265 32.13 1.215 30.86
B Ref. In . mm. .349 8.86 .349 8.86 .349 8.86 .349 8.86 .349 8.86 .349 8.86 .390 9.90 .392 9.96 .392 9.96 .392 9.96 .392 9.96 .392 9.96 .392 9.96 .435 11.05
000-01-25-163 and 000-01-25-165 .276 (7.01) A B 2XR(.078)
000-01-25-163
2XR(.080)
000-01-25-165
000-01-25-162 and 000-01-25-164 A
B
000-01-25-163 and 000-01-25-165
000-01-25-162 and 000-01-25-164
Interfacial Seals For Metal Shell Micro-D Socket Connectors Replacement Interfacial Seals fit Micro-D metal shell socket connectors. These blue fluorosilicone seals allow replacement of damaged seals.
A B
© 2013 Glenair, Inc.
Layout 9S 15S 21S 25S 31S 37S 51S 51-2S 67S 69S 75S 100S 130S
A Ref. Part Number 000-01-09-132 000-01-15-132 000-01-21-132 000-01-25-132 000-01-31-132 000-01-37-132 000-01-51-132 000-01-51-143 000-01-67-132 000-01-69-132 000-01-75-132 000-01-00-132 000-01-30-132
High Performance Micro-D Connectors and Cables
In. .330 .480 .630 .730 .880 1.030 .976 1.380 1.780 1.276 1.376 1.386 1.736
B Ref. mm. 8.4 12.2 16.0 18.5 22.4 26.2 24.8 35.03 45.21 32.41 34.95 35.20 44.09
U.S. CAGE Code 06324
In . .180 .180 .180 .180 .180 .180 .223 .180 0.180 0.223 0.223 0.270 .270
mm. 4.6 4.6 4.6 4.6 4.6 4.6 5.7 4.6 4.60 5.70 5.70 6.90 6.90 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-5 E-Mail:
[email protected]
N
Micro-D Accessories
Metal Protective Covers with Silicone Rubber Gaskets 500-017 and 500-037
Choose Metal Protective Covers for full environmental protection. Silicone Rubber Gasket provides a watertight seal. Use with M83513 Type Metal Shell Micro-D Connectors Select A Protective Cover Style Style 1
Style 2
Style 3
Tapped Threads Panel Silicone Gasket (All Styles)
Use With Micro-D Connectors With Jackposts Not for rear panel mounted connectors.
Use With Micro-D Connectors With Jackscrews
Use With Rear-Panel Mounted Micro-D Connectors
How To Order 500-017 Style 1 and 2 Protective Covers 500-017
Sample Part Number
M
25 MB
F
4
-06
Series
500-017 B - Cad/Olive Drab C - Black Anodize Nickel E - Chem Film J - Cadmium, Yellow Chromate Drab M - Electroless NF - Cadmium, Olive Shell Finish R - Red Anodize Y - Gold Iridite Over Cadmium Plate Z2 - Gold ME - Electroless Nickel, Grade A Shell Size 09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table I) STYLE 1 STYLE 2 Fits Micro-D With Jackposts, Cover has Fits Micro-D's With Jackscrews Cover has Tapped Female Hardware Option Jackscrews Threads MB - Fillister Head Jackscrew (See Note 3) F - Female Threads MH - Hex Head Jackscrew (See Note 3) N - No Lanyard F - Wire Rope, Nylon Jacket G - Flexible Nylon Rope Lanyard Option H - Wire Rope, Hi-Temp Fluoropolymer Jacket R - Wire Rope, PVC Jacket T - Wire Rope, No Jacket Lanyard Length Length in One Inch Increments; Example: “6” equals six inches. Ring Terminal Ordering Code 01 - .140 (3.6) 04 - .197 (5.0) 05 - .167 (4.2) 06 - .125 (3.2) I.D. of Ring Terminal
How To Order Style 500-037 Style 3 Protective Cover 500-037
Sample Part Number Series
N
Shell Finish Shell Size Rear Mounted (Omit for Front Mount) Hardware Option Lanyard Length Attachment Ring "G" Dia. Attachment Length Opt © 2013 Glenair, Inc.
M
09
R3
B
F
-01 -2
500-037 C - Black Anodize Nickel E - Chem Film J - Cadmium, Yellow Chromate Drab N - Cadmium Plate/Olive Drab M - Electroless NF - Cadmium, Olive Z2 - Gold R - Red Anodize Y - Gold Iridite over Cadmium Plate 9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table I) R1 - .031 (0.79) Panel R2 - .047 (1.19) Panel R3 - .062 (1.57) Panel
R4 - .093 (2.36) Panel
B - (2) Male Fillister Head H - (2) Male Hex Socket F - (2) Female Jackpost FB - (1) Female Jackpost and (1) Male Fillister Head FH - (1) Female Jackpost (1) Male Hex Socket N - No Lanyard G - Flexible Nylon Rope R - Wire Rope, PVC Jacket F - Wire Rope, Nylon Jacket H - Wire Rope, Hi-Temp T - Wire Rope, No Jacket Fluoropolymer Jacket 01 - .140 (3.6) 02 - .182 (4.6) 03 - .191 (4.8) 04 - .197 (5.0) 05 - .167 (4.2) 06 - .125 (3.2) 07 - .218 (5.5) Example 2 = 2 inches (omit for standard 4 inch) High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-6 E-Mail:
[email protected]
Micro-D Accessories
Metal Protective Covers with Silicone Rubber Gaskets 500-017 and 500-037
Table I: Protective Cover Dimensions Style 1
Style 2
Style 3
D
D
A
A C B E
C E
C B th Leng
th Leng
RING TERMINAL DIA.
th Leng
RING TERMINAL DIA.
RING TERMINAL DIA.
F
.280 (7.1)
380 (9.6)
.260 (6.6) MAX
#2-56 UNC THREADS SIZES 9-69 #4-40 UNC THREADS SIZE 100
#2-56 UNC THREADS SIZES 9-69 #4-40 UNC THREADS SIZE 100
#2-56 UNC THREADS SIZES 9-69 #4-40 UNC THREADS SIZE 100
For Micro-D Connectors With Jackposts
For Micro-D Connectors With Jackscrews
For Rear-Panel Mounted Micro-D
Dimensions for Style 1 and 2 Size 9 15 21 25 31 37 51 51-2 67 69 100
A Max. In. mm. .453 11.5 .453 11.5 .453 11.5 .453 11.5 .453 11.5 .453 11.5 .496 12.6 .453 11.5 .453 11.5 .496 12.6 .539 13.7
B Max. In . mm. .930 23.6 1.080 27.4 1.230 31.2 1.330 33.8 1.480 37.6 1.630 41.4 1.580 40.1 1.980 50.3 2.380 60.5 1.880 47.8 2.315 58.8
C mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
D Max. In. mm. .380 9.7 .380 9.7 .380 9.7 .380 9.7 .380 9.7 .380 9.7 .420 10.7 .380 9.7 .380 9.7 .420 10.7 .470 11.9
D Max In. mm. .453 11.51 .453 11.51 .453 11.51 .453 11.51 .453 11.51 .453 11.51 .496 12.60 .453 11.51 .453 11.51 .496 12.60 .539 13.69
E Max In. mm. .930 23.62 1.080 27.43 1.230 31.24 1.330 33.78 1.480 37.59 1.630 41.40 1.580 40.13 1.980 50.29 2.380 60.45 1.880 47.75 2.315 58.80
In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
Dimensions for Style 3 Shell Size 09 15 21 25 31 37 51 51-2* 67 69* 100
A Ref In. mm. .328 8.33 .328 8.33 .328 8.33 .328 8.33 .328 8.33 .328 8.33 .371 9.42 .328 8.33 .328 8.33 .371 9.42 .414 10.52
© 2013 Glenair, Inc.
B Ref In . mm. .805 20.45 .955 24.26 1.105 28.07 1.205 30.61 1.355 34.42 1.505 38.23 1.455 36.96 1.855 47.12 2.255 57.28 1.755 44.58 2.190 55.63
C In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800
mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72
E Max. In. mm. .795 20.2 .945 24.0 1.095 27.8 1.195 30.4 1.345 34.2 1.495 38.0 1.445 36.7 1.845 46.9 2.245 57.0 1.745 44.3 2.180 55.4
Style 3 Rear Mounted Dash No.
High Performance Micro-D Connectors and Cables
F
Dash No
In.
mm.
Panel Thickness
R1
.126
3.2
.031
R2
.110
2.8
.047
R3
.095
2.4
.062
R4
.064
1.6
.093
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-7 E-Mail:
[email protected]
N
Micro-D Accessories
Metal Protective Covers with Silicone Rubber Gaskets 500-107
Choose Metal Protective Covers for full environmental protection. Silicone Rubber Gasket provides a watertight seal.
How To Order Metal Protective Covers
500-107
Sample Part Number Series
Shell Finish
Connector Size Style Hardware
Attachment Type
Attachment Length (Inhes) Attachment Diameter
31
P
B
N
5
01
500-107 B - Cadmium Plate/Olive Drab C - Black Anodize E - Chem Film J - Cadmium, Yellow Chromate M - Electroless Nickel NF - Cadmium, Olive Drab R - Red Anodized Y - Gold Iridite Over Cadmium Plate Z1 - Stainless Steel/Passivate Z2 - Gold Plate ME - Electroless Nickel, Grade A 9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table I) P - Dust Cover for Plug R - Dust Cover for Receptacle (See Table II) B - No Hardware (Ø.093) M - Hexhead Jackscrew S - Slotted Jackscrew P - Female Jackpost M1 - Extended Hexhead Jackscrew S1 - Extended Slotted Jackscrew L - Hexhead Non-Removable Jackscrew K - Extended Non-Removable Jackscrew F - Wire Rope, Nylon Jacket H - Wire Rope, Fluoropolymer Jacket N - No Lanyard Attachment NB - No Lanyard Or Attachment Boss R - Wire Rope, PVC Jacket T - Wire Rope, No Jacket G - Flexible Nylon Rope Length in One Inch Increments; Example: “6” equals six inches. 01 - .140 (3.6) 02 - 0.182 03 - 0.191 04 - .197 (5.0) 05 - .167 (4.2) 06 - .125 (3.2) I.D. of Ring Terminal
Table I: Select A Protective Cover Style Style P
Style R
N
GASKET ON PLUG COVER ONLY
Use With Micro-D Plugs
© 2013 Glenair, Inc.
J
Notes
1. Assembly identified with manufacturer's name and p/n, space permitting. 2. Material/finish: Backshell - see How To Order Table Hardware - cres/passivated Attachment - see How To Order Table Gasket - silicone/N.A. 3. Attachment to withstand 25 lb min. Pull test.
Use With Micro-D Receptacles
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-8 E-Mail:
[email protected]
Micro-D Accessories
Metal Protective Covers with Silicone Rubber Gaskets 500-107
Table II: Dimensions
Style R
.093
Dust Cover For Receptacle
.450 MAX
C
.186 MAX
ATTACHMENT DIA.
E D
B
LENGTH
A
Style P
GASKET ON PLUG COVER ONLY NO BOSS ON 'NB' ATTACHMENT TYPE (SEE HOW TO ORDER TABLE FOR DETAILS) .450 MAX
Dust Cover For Plug
.093
.198 MAX
C
ATTACHMENT DIA
E D
B
LENGTH
A
Layout 9R 9P 15R 15P 21R 21P 25R 25P 31R 31P 37R 37P 51R 51P 51-2R 51-2P 67R 67P 69R 69P 100R 100P © 2013 Glenair, Inc.
A Max 0.785 0.785 0.935 0.935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.170 2.170
B ±.003 0.565 0.565 0.715 0.715 0.865 0.865 0.965 0.965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.800 1.800
C Max 0.333 0.400 0.483 0.551 0.633 0.701 0.733 0.801 0.883 0.951 1.033 1.101 0.983 1.051 1.384 1.450 1.784 1.850 1.284 1.350 1.383 1.451
High Performance Micro-D Connectors and Cables
D Max 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.184 0.250 0.228 0.296 0.184 0.250 0.184 0.250 0.228 0.296 0.270 0.333 U.S. CAGE Code 06324
E Max 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.308 0.351 0.351 0.308 0.308 0.310 0.310 0.351 0.351 0.394 0.394 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-9 E-Mail:
[email protected]
N
Micro-D Accessories
“Marshall Bean” Protective Rubber Covers with Tether Rope 780-555
Materials & Finishes
Rubber Covers for Tactical Equipment and Field Instruments – These friction-fit covers provide dust and splash protection.
Fits Metal Shell M83513 Type Connectors
Two Tether Styles – Choose ring terminals for attachment to a panel, or choose slip knots for cable attachment. -55° to +125° Temperature Range
Cover
SBR Rubber Per ASTM D2000 Type C
Ring Terminal
Stainless Steel
Crimp Ring
Copper, Black Oxide Finish
How To Order Rubber Protective Covers
780-555
Sample Part Number Series
37P
G
4
-SK
C
780-555 9P,15P, 21P, 25P, 31P, 37P, 51P, 51-2P, 67P, 69P, 100P 9S,15S, 21S, 25S, 31S, 37S, 51S, 51-2S, 67S, 69S, 100S Omit - (leave blank) Cover only, no cord G - Nylon Cord Length in One Inch Increments; Example: “6” equals six inches ± .250 (6.35) Inches
Connector Layout Nylon Cord Option Nylon Cord Length
Attachment Option
Ring Terminal 06 - .125 (3.2) I.D. 01 - .140 (3.6) I.D. 05 - .167 (4.2) I.D. 04 - .197 (5.0) I.D. SK - Slip Knot
Rubber Type
Omit - Standard Rubber C - Conductive Rubber
Dimensions LENGTH
.40 (10.2) .25 (6.4) MAX RING TERMINAL
.310 (7.9) MAX
LENGTH DETERMINED AT .50 (12.7) DIA.
B
N
SLIP KNOT
A Layout 9P, 9S 15P, 15S 21P, 21S 25P, 25S 31P, 31S 37P, 37S
A Max. In. .830 .980 1.130 1.230 1.380 1.530
B Max. mm. 21.08 24.89 28.70 31.24 35.05 38.86
In .
mm.
.370 .370 .370 .370 .370 .370
9.40 9.40 9.40 9.40 9.40 9.40
Layout 51P, 51S 51-2P, 51-2S 67P, 67S 69P, 69S 100P, 100S
A Max. In. 1.480 1.880 2.770 1.780 2.215
B Max. mm. 37.59 47.75 70.36 45.21 56.26
In .
mm.
.410 .370 .370 .410 .460
10.41 9.40 9.40 10.41 11.68
Standard material contains trace amounts of sulfur (a vulcanizing agent) which is known to contribute to degradation/ corrosion of silver plated components such as braid, etc. Specify MOD Code suffix -675 for sulfur-free material. © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-10 E-Mail:
[email protected]
Micro-D Accessories
Stainless Steel Jackscrew Kits with E-Rings 080-00-00-5XX
Mil Spec Jackscrew Kits feature 300 series stainless steel and easily attach to Micro-D connectors with an e-ring. Order One Kit Per Connector Each kit contains two jackscrews and e-rings.
Mil Spec Jackscrew Kits Configuration
Connector Size, Thread Size Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
Part Number Mil Spec Part Number
Dimensions
Glenair Part Number
.083 (2.11) DIA
.062 (1.57) HEX
M83513/05-02
.125 (3.18) DIA
080-00-00-502
Hex Head Low Profile
Sizes 9 to 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
.258 (6.55) MAX
.103 (2.62) MAX .140 (3.56) DIA
.062 (1.57) HEX
Sizes 75-130 Mil Spec Size H #4-40 UNC-2A
M83513/05-12
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD
.187 (4.75) DIA
080-00-00-512
.292 (7.41) MAX
.098 (2.49) .083 (2.11) DIA
M83513/05-05
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD
.125 (3.18) DIA
080-00-00-505
.258 (6.55) MAX
.103 (2.62) MAX .140 (3.56) DIA
Slot Head Low Profile
Sizes 75-130 Mil Spec Size H #4-40 UNC-2A Sizes 9 - 69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
M83513/05-15
.187 (4.75) DIA
080-00-00-515
.098 (2.49)
.292 (7.41) MAX .062 (1.57) HEX
M83513/05-03
080-00-00-503
Hex Head Extended
Sizes 9-69 Contacts. Mil Spec Size A to G #2-56 UNC-2A
.083 (2.11) DIA
.156 (3.96) DIA MAX
M83513/05-13
080-00-00-513
.140 (3.56) DIA
.200 (5.08) DIA MAX
.083 (2.11) DIA
080-00-00-506
.156 (3.96) DIA MAX
Slot Head Extended
© 2013 Glenair, Inc.
M83513/05-16
080-00-00-516
.200 (5.08) DIA MAX
High Performance Micro-D Connectors and Cables
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD .258 (6.55) MAX
.610 (15.49) MAX .140 (3.56) DIA
Sizes 75-130 Mil Spec Size H #4-40 UNC-2A
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD .292 (7.41) MAX
.610 (15.49) MAX
M83513/05-06
#2-56 UNC 2A .090 (2.29) MIN PERFECT THD .258 (6.55) MAX
.610 (15.49) MAX .062 (1.57) HEX
Sizes 75-130 Mil Spec Size H #4-40 UNC-2A
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD
.610 (15.49) MAX
U.S. CAGE Code 06324
#4-40 UNC 2A .110 (2.79) MIN PERFECT THD .292 (7.41) MAX
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-11 E-Mail:
[email protected]
N
Micro-D Accessories
Stainless Steel Jackscrew Kits with C Clips 179-013-XX
C Clip Jackscrew Kits offer an alternative to e-ring jackscrew kits. The c clip fits over the flange and, unlike e-rings, cannot be dislodged in handling or use.
Corrosion-Resistant Steel– The clip is made from 17-7PH spring temper stainless steel. The jackscrew is made from 125 KPSI tensile strength stainless steel, passivated.
Order Two Kits Per Connector. Each kit consists of one jackscrew and one c clip.
Application Note: The magnetic permeability of the c clip exceeds the 2.0 µ maximum of MIL-DTL-83513.
.135 (3.4) REF
.205 (5.21)
.205 (5.2) REF
.295 (7.5)
.130 (3.3)
.130 (3.3) #2-56 UNC
#4-40 UNC SIZE 100
Figure 1
Figure 2
C Clip for Size 9 - 69 Pin Micro-D
C Clip for Sizes 75-130 Micro-D
Part Number
Jackscrew Type
Thread Size
Configuration
Recommended Max.Torque
Max. Weight In Grams (2 Kits)
179-013-1S 179-013-1H 179-013-2S 179-013-2H
Slot Head Hex head Slot Head Hex head
#2-56 UNC #2-56 UNC #4-40 UNC #4-40 UNC
Figure 1 Figure 1 Figure 2 Figure 2
2.5 inch-pounds 2.5 inch-pounds 4.0 inch-pounds 4.0 inch-pounds
1.0 1.0 1.5 1.5
Replacement Hardware Kits for C Clip Micro-D Backshells Replacement Hardware Kits for Standard Series 50 Micro-D Backshells. Order Two Kits Per Connector. Each Jackscrew kit consists of one jackscrew and one "C" clip.
N
Fillister Head Jackscrew
Hex Head Jackscrew
Part Number
Thread Size
Part Number
Thread Size
687-152-01B 687-152-02B
#2-56 (9-69 pin) #4-40 (75-130 pin)
687-152-01 687-152-02
#2-56 (9-69 pin) #4-40 (75-130 pin)
© 2013 Glenair, Inc.
Corrosion-Resistant Steel – The clip is made from 17-7PH spring temper stainless steel. The jackscrew is made from 300 series stainless steel, passivated.
Jackpost
Extended Jackscrew Part Number (dash # = size)
Overall Length
Part Number
Thread Size
687-439-09 687-439-15 687-439-21 687-439-25 687-439-31 687-439-37 687-439-51 687-439-100
1.27 (32.3) 1.40 (35.6) 1.52 (38.6) 1.58 (40.1) 1.64 (41.7) 1.68 (42.7) 1.71 (43.3) 1.81 (46.0)
687-194 687-194-1
#2-56 (9-69 pin) #4-40 (75-130 pin)
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-12 E-Mail:
[email protected]
Micro-D Accessories
Stainless Steel Jackpost Kits Standard Hex, Rear Panel or Rear Panel PCB
080-00-00-1XX, 500-069-X-X, 177-504-X-X and 177-505-X-X-X Micro-D Jackpost Kits feature 300 series stainless steel. Select a style: standard hex posts, rear panel, or rear panel printed circuit board. Order One Kit Per Connector. Each kit contains two jackposts.
Rear Panel Mount Micro-D Jackpost
Jackpost General information
1. Material and Finish: Corrosion resistant steel in accordance with ASTM A484 and ASTM A582, passivated in accordance with ASTM A967. 2. Mounting Torque: #2-56 threads= 3.0 - 4.0 inch-pounds, #4-40 threads = 5.0 - 6.0 inch-pounds. Mating Torque: #2-56 threads= 1.0 2.5 inch-pounds, #4-40 threads = 3.5 - 4.0 inch-pounds. Maximum recommended torque for installation and operation. 3. Standard Package: One kit consists of two jackposts, 2 washers and 2 nuts for styles 1 and 2. Style 3 kits contain two jackposts. One kit per bag. 4. Application: Style 1 and 2 jackposts are compatible with any standard Micro-D connector. Style 3 jackposts for rear panel mounting Glenair printed circuit board connectors types BS, BR, and CBR only.
Select a Jackpost Style Style 1
Style 2
Use With Standard Solder Cup or Pigtail Micro-D Connectors
Style 3
Use With Rear Panel Mounted Solder Cup or Pigtail Micro-D Connectors
Use With Rear Panel Mounted Printed Circuit Board Micro-D Connectors
Style 1 Jackpost Kits Style 1 Jackpost Kits are standard kits for installation on all standard Micro-D connectors. Each kit contains two jackposts, two hex nuts and two lockwashers. Connector Sizes (THDS) 9 — 69 M83513 sizes A thru G (#2-56)
75-130 M83513 size H (#4-40)
Mil Spec Part Number
Glenair Part Number
M83513/05-07
M83513/05-17
© 2013 Glenair, Inc.
080-00-00-100 500-069-2-1 500-069-2-2 500-069-2-3 500-069-2-4 500-069-2-5 080-00-00-101 500-069-4-1 500-069-4-2 500-069-4-3 500-069-4-4 500-069-4-5
A Length In. ± .015
mm. ± 0.4
.475 .688 .813 .938 1.063 1.188 .475 .680 .805 .930 1.055 1.180
12.1 17.5 20.7 23.8 27.0 30.2 12.1 17.3 20.4 23.6 26.8 30.3
.086 (2.2)-56 UNC-2B
Figure
.125 (3.2) HEX
.112 (2.8)-40 UNC-2B
.187 (4.7) HEX
N
.185 / .175 (4.7 / 4.4)
.190 / .185 (4.8 / 4.7)
Figure 1 A
.088 (2.2) MAX .026 (0.7) MAX .072 (1.8) MAX
Figure 2
High Performance Micro-D Connectors and Cables
A
.088 (2.2) MAX .031 (0.8) MAX
.086 (2.2)-56 UNC-2A WASHER NUT
.140 (3.6) ± .003 (0.1) .112 (2.8)-40 UNC-2A
.072 (1.8) MAX
WASHER NUT
.154 (3.9) HEX
Figure 1 #2-56 Jackpost
U.S. CAGE Code 06324
Figure 2 #4-40 Jackpost
.187 (4.7) HEX
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-13 E-Mail:
[email protected]
Micro-D Accessories
Stainless Steel Jackpost Kits Standard Hex, Rear Panel or Rear Panel PCB
080-00-00-1XX, 500-069-X-X, 177-504-X-X and 177-505-X-X-X Style 2 Jackpost Kits For Rear Mounted Connectors Style 2 Jackpost Kits are for rear panel mounted connectors.These round, slotted posts accommodate panel thickness from .031 inches (0.8 mm.) to .125 inches (3.2 mm.). Connector Size (THDS)
9 — 69 M83513 sizes A thru G (#2-56)
75-130 M83513 size H (#4-40)
Panel Thickness In. .031 .047 .062 .094 .125 .080 .031 .047 .062 .094 .125 .080
.156 (4.0) DIA .050 (1.3)
.050 (1.3)
A Part Number
mm 0.8 1.2 1.6 2.4 3.2 2.0 0.8 1.2 1.6 2.4 3.2 2.0
.187 (4.7) DIA
177-504-2-2 177-504-2-3 177-504-2-4 177-504-2-5 177-504-2-6 177-504-2-7 177-504-4-2 177-504-4-3 177-504-4-4 177-504-4-5 177-504-4-6 177-504-4-7
In. ± .003
mm. ± 0.08
.024 .041 .055 .086 .118 .073 .024 .041 .055 .086 .118 .073
0.61 1.04 1.40 2.18 3.00 1.85 0.61 1.04 1.40 2.18 3.00 1.85
.188 ± .005 (4.8 ± 0.13)
Figure A
Figure 1
.112 (2.8)-40 UNC-2B
.475 ± .015 (12.1 ± 0.4) .026 (0.7) MAX .072 (1.8) MAX
.180 ± .005 (4.6 ± 0.13) .086 (2.2)-56 A UNC-2B .475 ± .015 (12.1 ± 0.4) .119 (3.0)
.086 (2.2)-56 UNC-2A
.031 (0.8) MAX
LOCKWASHER NUT
.112 (2.8)-40 UNC-2A WASHER
.072 (1.8) MAX
NUT .187 (4.7) HEX
.154 (3.9) HEX
Figure 2 #4-40 Jackpost
Figure 1 #2-56 Jackpost
Figure 2
.140 (3.6) ± .003 (0.1)
Style 3 Jackpost Kits For Printed Circuit Board Connectors Style 3 Jackpost Kits are for rear panel mounted PCB connectors. Select the right post by choosing the connector style (BS, BR and CBR are the three standard PCB connector configurations). .156 (4.0) DIA
Connector Size (THDS)
9 — 69 M83513 sizes A thru G (#2-56)
N 75-130 M83513 size H (#4-40)
Connector Style, Overall Length BS, CBR .365 (9.3) OAL
BR .398 (10.1) OAL
BR, CBR .475 (12.1) OAL
BS .360 (9.1) OAL
Panel Thickness In.
mm.
.031 .047 .062 .094 .125 .080 .031 .047 .062 .094 .125 .080 .031 .047 .062 .094 .125 .080 .031 .047 .062 .094 .125 .080
0.8 1.2 1.6 2.4 3.2 2.0 0.8 1.2 1.6 2.4 3.2 2.0 0.8 1.2 1.6 2.4 3.2 2.0 0.8 1.2 1.6 2.4 3.2 2.0
A Part Number 177-505-A-2-2 177-505-A-2-3 177-505-A-2-4 177-505-A-2-5 177-505-A-2-6 177-505-A-2-7 177-505-B-2-2 177-505-B-2-3 177-505-B-2-4 177-505-B-2-5 177-505-B-2-6 177-505-B-2-7 177-505-C-4-2 177-505-C-4-3 177-505-C-4-4 177-505-C-4-5 177-505-C-4-6 177-505-C-4-7 177-505-D-4-2 177-505-D-4-3 177-505-D-4-4 177-505-D-4-5 177-505-D-4-6 177-505-D-4-7
In. ± .003 .024 .041 .055 .086 .118 .073 .024 .041 .055 .086 .118 .073 .024 .041 .055 .086 .118 .073 .024 .041 .055 .086 .118 .073
mm. ± 0.08 0.61 1.04 1.40 2.18 3.00 1.85 0.61 1.04 1.40 2.18 3.00 1.85 0.61 1.04 1.40 2.18 3.00 1.85 0.61 1.04 1.40 2.18 3.00 1.85
Figure
A
.086 (2.2)-56 UNC-2B .119 (3.0)
OVERALL LENGTH
.086 (2.2)-56 UNC-2A
Figure 1
Figure 1 #2-56 Jackpost .187 (4.7) DIA .050 (1.3)
.180 ± .005 (4.6 ± 0.13)
Figure 2
For CBS Style Circuit Board Connectors––See Catalog Page C-16 © 2013 Glenair, Inc.
.188 ± .005 (4.8 ± 0.13)
.050 (1.3)
High Performance Micro-D Connectors and Cables
OVERALL LENGTH
A
.112 (2.8)-40 UNC-2B .140 (3.6) ± .003 (0.1) .112 (2.8)-40 UNC-2A
Figure 2 #4-40 Jackpost U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-14 E-Mail:
[email protected]
Metal Shell
Edgeboard and circular connectors For high reliability applications
MWEB Edgeboard Features: • Designed for motherboard–to–daughter applications • Available in four styles: cardedge and through hole for daughtercards as well as vertical and right angle for motherboards • Hardened versions of 128 pin and 184 pin commercial board connectors MWKQ Circular Features: • Designed for panel–to–cord I/O applications • Quick-connect/disconnect capabilities • Available in two sizes with an option of 7 or 19 contacts • Factory terminated
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Micro-D Edge Board MicroStrips
Section P MWEB Edgeboard and MWKQ Circular Connectors Product Selection Guide
Rugged Mil-Spec Performance in a High Density Backplane Connector: The MWEB Edgeboard MWEB EdgeBoard Connectors These two row .050 inch (1.27 mm) pitch connectors are designed for motherboard-to-daughtercard applications. Available in four styles: surface mount cardedge for daughtercards, vertical thruhole for motherboards, right angle thru-hole for daughtercards, and prewired cable connectors, these MWEB connectors feature rugged aluminum shells and TwistPin contacts. The single gang 128 pin and the two gang 184 pin (2 X 92 pin) are a ruggedized alternative to commercial board connectors.
MWEB EdgeBoard Connectors Page G-2
A B C D E F G
MWKQ Micro Cicular Connectors Feature Quick coupling and Quick Release MWKQ Micro Circular Connectors The MWKQ connector provides quick-disconnect capability combined with a high performance contact system and rugged construction. Intended for panelto-cord I/O applications, these connectors are found in tactical military equipment, weapons systems and various instrumentation applications. Available in two sizes with 7 or 19 contact, the MWKQ is factory-terminated to the wire of your choice. Shielded, overmolded cordsets and other custom versions are available.
Release Sleeve
MWKQ Series 19P Panel Mount Receptacle
Lock Ring
MWKQ Series 19S Cable Plug Page P-13
D38999 19 Contacts
Glenair Series 80 19 Contacts
MWKQ Series 19 Contacts
H J K L M N P
Glenair Nano 19 Contacts
Q INDEX
*The Glenair Series 89 Nanominiature Connectors Catalog is available online at www.glenair.com
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-1 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
MWEB Series Edge Board Connectors Industry-Standard, Approved for Airborne Computers MWEB EdgeBoard connectors meet the requirements of MIL-DTL-55302/120 thru /123. Available with 128 or 184 contacts.
A B
Rugged Aluminum Shell and TwistPin Contacts MWEB connectors share the same design and construction as the Glenair Micro-D M83513 connector.
C
Backplane, Daughtercard and Wired Vertical mount thru-hole motherboard connectors and straddle mount daughtercard connectors are complemented by right angle thru-hole and pre-wired I/O versions.
D E
F Rugged Mil Spec Performance in a HighDensity Backplane Connector System: G The MWEB EdgeBoard PC Board
H J K L M N
Featuring a width of only ¼ inch (6.4 mm.), MWEB Series connectors provide high-density in a rugged metal shell connector. Contacts are rated at 3 amps, and the DWV voltage rating is 150 volts AC RMS at 70,000 feet altitude. The two row, .050 inch (1.54 mm.) spacing is made possible by using TwistPin reverse gender contacts. Insert-molded LCP insulators are resistant to heat and chemicals. Contacts are beryllium copper with fifty microinches of gold plating. Shells are machined aluminum alloy. Hexagonal polarizing keys allow up to 36 keying options.
P
Contact Tail .019” (0.49) Diameter Copper Wire, Solder Dipped Rigid Epoxy Potting Compound Liquid Crystal Polymer Dielectric
Aluminum Shell, Electroless Nickel Plated
Micro Socket Contact
Liquid Crystal Polymer Dielectric TwistPin Contact
Aluminum Shell, Electroless Nickel Plated
Rigid Epoxy Potting Compound
Q INDEX
Contact Tail .019” (0.49) Diameter Copper Wire, Gold Plated
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-2 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
Vertical Mount Backplane Connector MWEB-128P
MWEB-128P Backplane Thru-Hole Connector
A
Part Number MWEB2L-128P5W4-.375
B
3.950 ± .015 (100.33 ± 0.38)
C
3.700 (93.98) .265 (6.73)
3.318 ± .003 (84.28 ± 0.08)
MAX.
PIN # A64
.191
PIN # B64
D
PIN # A1
.050 (1.27) TYP.
.050 (1.27)
PIN # B1
.277/.263 (7.04/6.68)
.40 (10.1) ± .010 (0.25) .300/.250 (7.62/6.35)
E .190/.180 (4.83/4.57) B EVEN
A EVEN
.375/.325 (9.52/8.26)
B64
B1
A64
A1
A ODD
.075 (1.91)
B ODD
Ø .017/.021 (0.43/0.53)
A3
A4
A2
B5
B3
128 X Ø .040 PTH
B4
A1
K Ø .091/.098 (2.31/2.49) DIA 2 PLACES
L M
.275 (6.99)
N
.075 (1.91) B1
B2
63 EQUAL SPACES AT .050 (1.27) (TYP)
P
.0375 (0.96) .075 (1.91)
Q
PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
H
INDEX
2X Ø .096 (2.44)
A5
G J
3.700 (93.98) .075 (1.91)
F
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-3 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
A
Straddle Mount Card-Edge Connector MWEB-128S
MWEB-128S Straddle Mount Cardedge Connector Part Number MWEB2L-128S4BS3
B
3.950 ± .015 (100.33 ± 0.38) 3.700 (93.98)
C D E
.265 (6.73) MAX.
3.41 ± .010 (86.61 ± 0.25) PIN # B64
.191
PIN # B1
.050 (1.27) TYP.
PIN # A64
.250 (6.3)
.050 (1.27)
PIN # A1
.465 (11.81) MAX
.260/.240 (6.60/6.10)
F G
.091/.098 (2.31/2.49) DIA 2 PLACES
.190 (4.83) DIA 2 PLACES
H
.070 (1.78)
.098/.091(2.49/2.31) DIA C’BORE .187 2 PLACES
J
.035 (0.89)
K
.190 (4.83) DIA 2 PLACES
L M N P Q
FOR 1/16" THICK PC BOARD
.030 (0.76) MAX 3.700 (93.98)
.091/.098 (2.31/2.49) DIA 2 PLACES
.275 (6.99)
.250 (6.35) MIN
.200 ± .020 (5.08 ± .51) MIN
.100 (2.54) MIN SOLDER
.128 (3.25) MAX 63 EQUAL SPACES AT .050 (1.27) (TYP)
.020/.032 (0.51/0.81)
INDEX
PATTERN SHOWN IS THE SAME ON BOTH SIDES OF PC BOARD
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-4 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
Right Angle Board Connectors MWEB-128S
MWEB-128S Right Angle PCB Connector MWEB2L-128SBR-.125
A
Liquid Crystal Polymer Dielectric Micro Socket Contact
Base Part Number
Rigid Epoxy Potting Compound
Liquid Crystal Polymer Tray, Epoxy Filled
C
PC Tail Length .090 .125 .190 .250
Aluminum Shell, Electroless Nickel Plated
PC Board
3.950 ± .015 (100.33 ± 0.38)
Contact Tail .019” (0.49) Diameter Copper Wire, Solder Dipped
3.700 (93.98) 3.41 ± .010 (86.61 ± 0.25) .050 (1.27) TYP.
PIN # A1
.050 (1.27)
PIN # B64
PIN # B1
.25 (6.3) .40 (10.2)
.775 (19.69) MAX
K
.30 (7.6) .091/.098 (2.31/2.49) DIA 2 PLACES
A64
L
CONNECTOR MATING FACE THIS SIDE 3.700 (93.98) .275 (6.99) B64 B63
Ø.098/.091(2.49/2.31) DIA C’BORE .190 (4.83) 2 PLACES
TAIL LENGTH ± .015 (0.38)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
A64
A3
A1
63 EQUAL SPACES AT .050 (1.27) (TYP)
.075 (1.91) .075 (1.91)
PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD
U.S. CAGE Code 06324
N P
A2
A4 A63
B1
B3
B5
.075 (1.91)
B2
B4
M
Q INDEX
.091/.098 (2.31/2.49) DIA 2 PLACES
G J
A64
A1
E
H
.265 (6.73) MAX.
B1
D F
PIN # A64
.191
.180 ± .005 4.57 ± 0.13)
B
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-5 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
A
Vertical Mount Backplane Connector MWEB-184P
MWEB-184S Straddle Mount Cardedge Connector Part Number MWEB2L-184NP5W4-.375
B
5.800 ± .015 (147.32 ± 0.38)
C
5.222/5.214 (132.64/132.45)
5.550 (140.97)
2.775 ± .005 (70.49 ± 0.13)
D E F G
.265 (6.73) MAX.
PIN # A92
.191
PIN # A1
PIN # B92
.050 (1.27) TYP.
.050 (1.27)
PIN # B1
.091/.098 (2.31/2.49) DIA 3 PLACES .400 (10.1) ± .010 (0.25)
.277/.263 (7.04/6.68)
H J
.300/.250 (7.62/6.35)
.190/.180 (4.83/4.57)
K L
.375/.325 (9.52/8.26)
5.550 (140.97) 184 X Ø.040 (1.02) PTH
M
.091/.098 (2.31/2.49) DIA 3 PLACES
N
A47
A92
A48
2.775 (70.49) .075 (1.91)
A45
B92
B48
A3 A4
A46
A1 A2
B3
B45
B47
P
.075 (1.91)
.017/.021 (0.43/0.53)
B4
B46
.275 (6.99) .075 (1.91)
B1 B2
.0375 (0.96) .075 (1.91) TYP
Q
.250 (6.35)
.250 (6.35)
45 EQUAL SPACES AT .050 (1.27) (TYP)
INDEX
PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-6 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
Straddle Mount Card-Edge Connector MWEB-184S
MWEB-184S Straddle Mount Cardedge Connector
A
Part Number MWEB2L-184NS4BS3 5.800 ± .015 (147.32 ± 0.38)
B
5.550 (140.97) .265 (6.73) MAX.
5.33 (135.38) MAX PIN # B92
.191
C
PIN # B1
PIN # A92
.050 (1.27) TYP.
.277/.263 (7.04/6.68)
.050 (1.27)
PIN # A1
D E
.465 (11.81) MAX
F .030 (0.76) MAX
.260/.240 (6.60/6.10)
.190 (4.83) DIA 3 PLACES
G
.091/.098 (2.31/2.49) DIA 3 PLACES
2.775 ± .005 (70.49 ± 0.13)
.100 (2.54) MIN SOLDER
.200 ± .020 (5.08 ± .51) MIN .070 (1.78)
FOR 1/16" THICK PC BOARD
.250 (6.35) MIN
.275 (6.99)
N
2.775 (70.49) .275 .275 (6.99) (6.99)
P Q
.020/.032 (0.51/0.81)
INDEX
45 EQUAL SPACES AT .050 (1.27) (TYP) PATTERN SHOWN IS THE SAME ON BOTH SIDES OF PC BOARD
© 2013 Glenair, Inc.
K M
.128 (3.25) MAX 45 EQUAL SPACES AT .050 (1.27) (TYP)
J L
5.550 (140.97) .091/.098 (2.31/2.49) DIA 3 PLACES
H
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-7 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
A B C D E
Right Angle Board Connector MWEB-184S
MWEB-184S Right Angle PCB Connector
PC Tail Length .090 .125 .190 .250
.098/.091(2.49/2.31) DIA C’BORE .190 (4.83) 3 PLACES
Aluminum Shell, Electroless Nickel Plated
PC Board Contact Tail .019” (0.49) Diameter Copper Wire, Solder Dipped
5.550 (140.97) 5.33 (135.38) MAX PIN # A1
PIN # A92
.191
PIN # B92
PIN # B1
.050 (1.27)
.265 (6.73) MAX.
.050 (1.27) TYP.
J
.25 (6.3)
.775 (19.69) MAX
.40 (10.2)
B46
B2
B47
.30 (7.6) B1
.180 ± .005 4.57 ± 0.13)
A1
M
A2
A46
2.775 ± .005 (70.49 ± 0.13)
A91
B3
B45 A46
A48
.075 (1.91) TYP
B1
.075 (1.91) TYP
A2 A45
A47
.075 (1.91)
B2
B46 B47
B91 A92
.091/.098 (2.31/2.49) DIA 3 PLACES
2.775 (70.49)
B48
B92
.091/.098 (2.31/2.49) DIA 3 PLACES
B92
A47
5.550 (140.97)
184 X Ø.040 (1.02) PTH
N Q
Liquid Crystal Polymer Tray, Epoxy Filled
5.800 ± .015 (147.32 ± 0.38)
H
P
Rigid Epoxy Potting Compound
TAIL LENGTH ± .015 (0.38)
G
L
Micro Socket Contact
Base Part Number
F
K
Liquid Crystal Polymer Dielectric
MWEB2L-184NSBR- .125
A3
A1
.275 (6.99) 45 EQUAL SPACES AT .050 (1.27) (TYP)
.250 (6.35)
.250 (6.35)
45 EQUAL SPACES AT .050 (1.27) (TYP)
INDEX
PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-8 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
MWEB Pre-Wired and Solder Cup Connectors MWEB2L
A B C MWEB EdgeBoard Connectors For Input/Output Wire-To-Board Applications With 128 or 184 contacts, these narrow profile factoryterminated MWEB connectors provide a space-saving I/O wire to board solution. Connector width of .25 inch (6.4 mm.) allows for high-density card slots.
D
High Performance TwistPin Contacts Suitable for airborne avionics processors and missioncritical computers, these pre-wired connectors feature interfacial seals and backpotting for improved environmental protection. Or, choose solder cup connectors for integration into wire harnesses.
E F
How To Order MWEB Pigtail Conncectors Sample Part Number Series Connector Layout Contact Type Wire Gage (AWG) Wire Type Wire Color Wire Length Inches Hardware Option
MWEB2L
-128
P
-6
K
7
-18
N
MWEB2L 128, 184N P - Pin S - Socket 4 - #24 6 - #26 8 - #28 0 - #30 K - M22759/11 600 VRMS Fluoropolymer (TFE) J - M22759/33 600 VRMS Modified Cross-Linked Tefzel® (ETFE) 1 - White 2 - Yellow 7 - Ten Color Repeating 18 - Total Length In Inches. “18” Specifies 18 Inches. N - No hardware
G H J K L
How To Order MWEB Solder Cup Connectors Sample Part Number Series Connector Layout Contact Type Termination Type Hardware Option
MWEB2L
-128
P
S
N
MWEB2L 128, 184N
M N
P - Pin S - Socket S - Solder Cup N - No Hardware
P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-9 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
MWKQ2L6 Quick Disconnect Micro Circular Connectors Plug Connectors
MWKQ Micro Circular Connectors feature quick coupling and quick release. The plug has a knurled release sleeve. To unmate, just pull back on the sleeve, compressing the locking ring and free it from the receptacle.
A B C D E F G H
How To Order Plug (Socket) Connectors
Sample Part Number
L
MWKQ2L6
Series No. of Contacts Contact Type Wire Gage (AWG)
-19
S
-6
K
7
-24
MWKQ2L6 7, 19 (See Table I and II) S - Socket 4 - #24 6 - #26 8 - #28 0 - #30 K - M22759/11 600 Vrms Fluoropolymer (TFE) J - M22759/33 600 Vrms Modified Cross-Linked Fluoropolymer (ETFE) 1 - White 2 - Yellow 5 - Color Coded Striped Wire Per MIL-STD-681 7 - Ten Color Repeating 18 - Total Length In Inches. “18” Specifies 18 Inches.
Wire Type Wire Color Wire Length Inches
Table I: Contact Arrangements
J K
Receptacle With Pin Contacts
Plug With Socket Contacts
Choose (7) or (19) Contacts – Connectors are supplied with hookup wires installed and potted.
7
2 3 4
6
6
1 5
7 Contacts Face View Pin Connector (Receptacle)
4 3
1 5
1
2
7
4
7 Contacts Face View Socket Connector (Plug)
3
12
8 13 17
7
7
16 19
19 Contacts Face View Pin Connector (Receptacle)
3
1
4
12 16 19
8 13 17
19 Contacts Face View Socket Connector (Plug)
M N P Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-10 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
MWKQ2L7 MWKQ2L8 and MWKQ2L9 Quick Disconnect Micro Circular Connectors
Receptacle Connectors, Inline, Front and Rear Mount How To Order Receptacle (Pin) Connectors
Sample Part Number Series No. of Contacts Contact Type Wire Gage (AWG) Wire Type Wire Color Wire Length Inches
MWKQ2L7
-7
P
-6
K
7
-24
MWKQ2L7 7, 19 (See Table I and II)
B
P - Pin 4 - #24 6 - #26 8 - #28 0 - #30 K - M22759/11 600 Vrms Fluropolymer (TFE) J - M22759/33 600 Vrms Modified Cross-Linked Fluropolymer (ETFE) 1 - White 2 - Yellow 7 - Ten Color Repeating 18 - Total Length In Inches. “18” Specifies 18 Inches.
C D
How To Order Receptacle (Pin) Connectors
Sample Part Number Series No. of Contacts Contact Type Wire Gage (AWG) Wire Type Wire Color Wire Length Inches
MWKQ2L8
-7
P
-6
K
7
-18
MWKQ2L8 7, 19 (See Table I and III)
G H
How To Order Receptacle (Pin) Connectors
Series No. of Contacts Contact Type Wire Gage (AWG) Wire Type Wire Color Wire Length Inches
MWKQ2L9
E F
P - Pin 4 - #24 6 - #26 8 - #28 0 - #30 K - M22759/11 600 Vrms Fluropolymer (TFE) J - M22759/33 600 Vrms Modified Cross-Linked Fluropolymer (ETFE) 1 - White 2 - Yellow 5 - Color Coded Striped Wire Per MIL-STD-681 7 - Ten Color Repeating 18 - Total Length In Inches. “18” Specifies 18 Inches.
Sample Part Number
A
-7
P
-6
K
7
-18
MWKQ2L9 7, 19 (See Table I and III)
J K
P - Pin 4 - #24 6 - #26 8 - #28 0 - #30 K - M22759/11 600 Vrms Fluropolymer (TFE) J - M22759/33 600 Vrms Modified Cross-Linked Fluropolymer (ETFE) 1 - White 2 - Yellow 7 - Ten Color Repeating 18 - Total Length In Inches. “18” Specifies 18 Inches.
L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-11 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
A B C D
Quick Disconnect Micro Circular Connectors MWKQ2L6 and MWKQ2L7 Materials and Finishes Aluminum Alloy 6061 with Electroless Nickel Plating Brass with Electroless Nickel Plating
Performance Specifications Current Rating
3 AMP
Dielectric Withstanding Voltage
600 VAC Sea Level 150 VAC 70,000 Feet
Insulation Resistance Contact Resistance Low Level CR Operating Temperature Shock Vibration Mating Force
5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum -55° C. to +150° C. 50 g. 20 g. (10 Ounces) X (# of Contacts)
Connector Shell, Release Sleeve
Insulator Liquid Crystal Polymer (LCP) Lock Ring & Jam Nut Stainless Steel Pin Contact
Beryllium Copper With 50 Microinches Gold over Nickel Plating
Socket Contact
Copper Alloy With 50 Microinches Gold Over Nickel Plating
Encapsulant
Epoxy Resin Hysol EE4215
Table II: Dimensions
E
.820 (20.83) MAX
F G
B
H
LOCK RING
INSULATED WIRE
J
A
RELEASE SLEEVE
PLUG CONNECTOR MWKQ2L6
K
.500 (12.7) MAX
G
L F
M N
PANEL CUTOUT
E THREADS
P Q
D
C
FRONT PANEL MOUNT RECEPTACLE CONNECTOR MWKQ2L7
A Max. Layout
INDEX
7 19
B Max.
C Max.
D Hex.
In.
mm.
In .
mm.
In.
mm.
In.
mm.
.385 .515
9.78 13.08
.305 .405
7.75 10.28
.500 .570
12.7 14.48
.500 .625
12.70 15.88
© 2013 Glenair, Inc.
E Thds.
F
.3125-32 UNEF-2A .500-28 UNEF-2A
High Performance Micro-D Connectors and Cables
G Dia.
In.
± .005
mm. ± 0.13
In.
mm.
.364 .475
9.25 12.07
.390 .515
9.91 13.08
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-12 E-Mail:
[email protected]
Micro-D Edge Board MicroStrips
Quick Disconnect Micro Circular Connectors MWKQ2L8 and MWKQ2L9 Materials and Finishes
Performance Specifications Current Rating
3 AMP
Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Low Level CR Operating Temperature Shock Vibration Mating Force
600 VAC Sea Level 150 VAC 70,000 Feet
Connector Shell,
Aluminum Alloy 6061 with Electroless Nickel Plating
5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum -55° C. to +150° C. 50 g. 20 g. (10 Ounces) X (# of Contacts)
Insulator Lock Ring & Jam Nut
Liquid Crystal Polymer (LCP) Stainless Steel
Pin Contact
Beryllium Copper With 50 Microinches Gold over Nickel Plating
Socket Contact
Copper Alloy With 50 Microinches Gold Over Nickel Plating
Encapsulant
Epoxy Resin Hysol EE4215
A B
Table III: Dimensions
C D E
A
F G H
.530 MAX.
J
IN LINE RECEPTACLE MWKQ2L8
B
K
.250
L
ØF E
C
M N
.520 D THREAD
P
REAR PANEL MOUNT RECEPTACLE CONNECTOR MWKQ2L9
ØA Max. Layout 7 19
ØB Max
C
D Thread
In.
mm.
In .
mm.
In.
mm.
.415 .545
10.54 13.84
.562 .682
14.27 17.32
.562 .682
14.27 17.32
© 2013 Glenair, Inc.
7/16-28 UNEF 9/16-24 UNEF
High Performance Micro-D Connectors and Cables
E
ØF
In.
mm.
In.
mm.
.425 .535
10.80 10.80
.440 .535
11.18 13.59
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com P-13 E-Mail:
[email protected]
Q INDEX
PANEL CUTOUT
Special Applications
Glenair ™ MicroStrips High reliability in a single row small form package
G
lenair Series 171 MicroStrips™ feature a .050" high–density board–to– wire connectors with optional guide pin polarization. Ideally suited for medical equipment, avionics, instrumentation satellites and other space applications. The Microstrip™ offers an economical single row solution where space savings is a priority. The rugged, high force twistpin contact accepts up to #24 wire, the current rating is 3 Amps, the voltage is 600 Vac, with a temperature rating of -55C to +150C. MicroStrips™ are available with up to 30 contacts. Five termination styles are availaable: solder–cup, pre–wired, PCB, surface mount and back–to–back.
Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000
[email protected] www.glenair.com
Micro-D Latching MicroStrips
Section Q Series 171 MicroStrips™ Product Selection Guide Product Selection Guide Single Row MicroStrips™ with Solder Cup Contacts
Solid Wire MicroStrips™ 171-002 Page Q-6
Single Row MicroStrips™ with Solid Wire
Pre-Wired MicroStrips™ 171-003 Page Q-7
Single Row MicroStrips™ with Insulated Stranded Wire
Right Angle PCB .050" Spacing 171-004 Page Q-9 Right Angle PCB Staggered 171-005, 171-006 Page Q-9 Vertical Mount PCB Headers 171-007 Page Q-9
A
Solder cup contacts for termination to #24 to #30 solid or stranded wire. Available in 1 to 30 positions. High performance M83513 TwistPin contact system. Contacts are factory-installed, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,-55C to +150C.
Factory-terminated to solid copper wire. Available in 1 to 30 positions. Optional pre-tinned leads or standard gold plated wire. High performance M83513 TwistPin contact system. Contacts are factory-installed, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,-55C to +150C.
Factory-terminated to mil spec high-temperature wire, size #24 to #30. Available in 1 to 30 positions. High performance M83513 TwistPin contact system. Contacts are factory-installed, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,-55C to +150C.
Single Row Right Angle PCB- .050" Board Spacing
Thru-hole mounting. Gold-plated .020" diameter right angle PC tails are on .050" centers for maximum density . Available in 1 to 30 positions. High performance M83513 TwistPin contact system. Contacts are factory-installed, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,-55C to +150C.
Right Angle PCB- Staggered
Thru-hole mounting. Gold-plated .020" diameter right angle PC tails are on staggered .050" or .100" spacing between rows. Available in 1 to 30 positions. High performance M83513 TwistPin contact system. Contacts are factoryinstalled, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,55C to +150C.
Single Row Vertical PCB
Thru-hole mounting. Gold-plated .020" diameter PC tails are spread to .100" by .100" centers for easy placement. Available in 1 to 30 positions. High performance M83513 TwistPin contact system. Contacts are factory-installed, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,-55C to +150C.
Surface Mount PCB- .050" Board Spacing
.013" diameter tails are formed to allow soldering to the surface of a PC board or flex circuit. Tails are solder-dipped in 63/37 tin-lead. Available in 1 to 30 positions. High performance M83513 TwistPin contact system. Contacts are factory-installed, non-removable and are encapsulated with epoxy. 3 Amp, 600 Vac,-55C to +150C.
Single Row Back-toBack MicroStrips™ 171-009 Page Q-15
These .050" pitch single row surface mount microstrips are available with 1 to 30 contacts. Optional guide pins provide circuit polarization. Contacts are TwistPin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
Single Row Back-to-Back MicroStrips™
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
C D E
Surface Mount 171-008 Page Q-13
© 2013 Glenair, Inc.
B
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-1 E-Mail:
[email protected]
F G H J K L M N P Q INDEX
Solder Cup MicroStrips™ 171-001 Page Q-4
Micro-D Latching MicroStrips
Series 171 MicroStrips™ General Information High Reliability TwistPin Contact System #24-30 AWG Wire Size .050" Pitch Contact Spacing Solder Cup, Pre-Wired or PCB Headers 3 Amps, +150C, 600 Vac
Series 171 MicroStrips™ Deliver TwistPin Performance and Durability In an Economical, Space-Saving Single Row Package Series 171 MicroStrips™ are intended for high reliability board-to-wire I/O and wire-to-wire applications. These nonenvironmental strips are typically used inside ruggedized equipment where moisture ingress is not a factor. The MicroStrip connector provides significant advantages compared to commercial-grade headers and jumpers. The rugged, high force twistpin contact accepts up to #24 gage wire, the current rating is 3 Amps, the voltage rating is 600 Vac, and the temperature rating is -55C to +150C. The Series 171 strip connector meets all applicable requirements of MIL-DTL-83513. Choose solder cup, pre-wired, or printed circuit board versions. A stainless steel latch provides secure coupling.
Socket Contact
TwistPin Contact
Mil Spec Crimp Joint
Epoxy
Socket Insulator
Pin Insulator
Why Choose TwistPins? The Glenair TwistPin contact system provides a superior wire attachment compared to stamped contacts. This translates into lower long-term contact resistance—and it does so under extreme conditions of vibration, shock and high heat. Plus, TwistPin connectors offer design flexibility without the penalty of longer delivery, setup charges or minimum order quantities. Materials and Finishes
Q
Contacts Insulators Latch Guide Pin Potting Compound Insulated Wire Solid Wire, PC Tails
© 2013 Glenair, Inc.
Copper alloy, 50 µInch gold plated Liquid crystal polymer (LCP) Stainless Steel Stainless Steel Epoxy Per MIL-W-22759/11 and /33 Per A-A-59551, gold plated or tinned
Specifications Current Rating Contact Resistance Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration
High Performance Micro-D Connectors and Cables
3 Amps 8 milliohms maximum 600 Vac sea level 5000 megohms minimum -55° C. to +150° C. 50 g. 20 g.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-2 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Designer's Guide About Spring Latches, Guide Pins and Mounting Holes
Optional stainless steel latch clips provide secure mating when subjected to shock and vibration. A single center latch is suitable for most applications (Fig. 1 and Fig. 2). Dual end latches are also available (Fig. 3). The spring latch is always installed on the socket strip (Fig. 1). The latch receiver is installed on the pin strip (Fig. 2). To unmate the connectors, simply press the release tab while pulling the connectors apart. MicroStrips™ are available with stainless steel guide pins. A single guide pin provides circuit polarization. A guide pin on each end (Fig. 2) helps to align connectors when mating and prevents damage to contacts. For most applications the preferred configuration is a single center latch with no guide pins. Mounting holes are now available (Fig.3). Attach strips to circuit boards with size 0-80 screws (customer-supplied). Latch Release Tab
Position #1 Identified with White Dot
Latch
.062" (1.57) Diameter Mounting Hole 2 Places
A B C D E
Spring Latch Clip
Figure 1
Socket Strip with Center Latch Part Number 171-003-8S-6K7-18-PBCL Spring latch installed in the center cavity of the socket MicroStrip. Ordering Code CL for Center Latch. This strip has 5 circuits plus one cavity for the latch and two for the guide pins, for a total of 8 cavities. Note the white paint dot on the insulator. This dot indicates position #1. The wire color code system is "10 Color Repeating". Wire #1 is black, followed by brown, red, orange, yellow, green, blue, violet, grey and white.
End Latches
Figure 2
Figure 3
Pin Strip with Center Latch and Guide Pins at Both ends. Part Number 171-003-8P-6K7-18-PBCL
Right Angle PCB Header with End Latches and Mounting Holes. Part Number 171-004-11P-.250-BLMH.
Spring latch installed in the center cavity and guide pins installed in end cavities. This strip has five electrical circuits plus two positions for guide pins and one position for the latch for a total of eight cavities. The stainless steel guide pins are installed into the end cavities of the socket strip. The end cavities of the pin strip are opened up to accept the mating guide pins.
Latch clips installed into the end cavities of the MicroStrip. Ordering Code BL for Both end Latches. Note the mounting holes. These holes allow the strip to be attached to a circuit board. Each mounting hole requires three cavities. The board mount leads are formed into a single row on .050" centers.
F G H J K L
About Board Mount Strips
Aerospace customers typically use MicroStrips™ for high reliability board-to-wire I/O applications. The pin strip is usually configured with right angle thru-hole PC tails. The strip is bonded to the PC board with epoxy, or attached to the board with screws installed in optional mounting holes. Surface mount and vertical mount versions are also available.
M N
Figure 4
Right Angle Pin Strip with Staggered PC Tails, Mounting Holes and Center Latch
P/N 171-005-23P-.125-CLMH
P
Note that the board mounted strip has 23 cavities called out in the part number, but the mating socket strip (Fig. 1) has 17. Also note that three cavities are taken up by the mounting holes, and the position #1 white dot moves to the first electrical position.
INDEX
Q
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-3 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Strips with Solder Cups 171-001
Single Row Solder Cup MicroStrips™ These .050" pitch single row solder cup microstrips accept #26 to #30 gage wire with standard contacts and up to size #24 wire with "large bore" contacts. Contacts are factory-installed and potted. Available with 1 to 30 contacts. Optional stainless steel latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
A B C D E F
How To Order Solder Cup Microstrips
171-001 - Single Row MicroStrip, .050" Contact Spacing, Solder Cup Contacts
Number of Cavities
1 to 30 (See Table I) Total number of cavities includes guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option.
Contact Gender and Solder Cup Size
J K
SS Socket Contacts, Size #26 Solder Cup
PS Pin Contacts, Size #26 Solder Cup
Omit For No Guide Pin
NS Pin Contacts, Size #24 Solder Cup
P1 Guide Pin in Cav. #1
PB Guide Pin at Both Ends
PS -P1 CL MH
TS Socket Contacts, Size #24 Solder Cup
P(x) Replace (X) with guide pin location.
Optional Guide Pin
L M
-7
Series
G H
171-001
Sample Part Number
P3 shown above: Omit For No Latch
CL Center Latch
Omit For No Mounting Holes
MH Mounting Holes
BL Latch at Both Ends
Optional Latch
N P Q
Optional Mounting Holes
The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface.
NOTE: when ordering "BLMH" Strip Connector allow for only 3 cavaties on each end (6 total)
INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-4 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Strips with Solder Cups 171-001
Table I: Dimensions
PIN CONNECTOR
A
SOCKET CONNECTOR
.200 (5.08) MAX
.083 (2.10) REF TYP
2Xø.062 (1.57) .050 (1.27) MAX
.083 (2.10) REF TYP
C
B
.200 (5.08) MAX .125 (3.18)
C
.050 (1.27) MAX
.300 (7.62)
D
2Xø.062 (1.57)
.110 (2.79) MAX
.062 (1.57)
.125 (3.18)
C
.135/.116 (3.43/2.95) .075 (1.91) MAX
.075 (1.91) .075 (1.91)
(A) B
# of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700
mm. 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78
.200 (5.08) REF
E
.075 (1.91)
F
(A) B
B Max. In. mm. .085 2.16 .135 3.43 .185 4.70 .235 5.97 .285 7.24 .335 8.51 .385 9.78 .435 11.05 .485 12.32 .535 13.59 .585 14.86 .635 16.13 .685 17.40 .735 18.67 .785 19.94
C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600
mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24
# of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
(A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450
mm. 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83
B Max. In. mm. .835 21.21 .885 22.48 .935 23.75 .985 25.02 1.035 26.29 1.085 27.56 1.135 28.83 1.185 30.10 1.235 31.37 1.285 32.64 1.335 33.91 1.385 35.18 1.435 36.45 1.485 37.72 1.535 38.99
C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350
mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29
CAVITY 1
CAVITY 1
Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
K L M P Q
CAVITY 1
Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2.
U.S. CAGE Code 06324
J
INDEX
PIN CONNECTOR SOCKET CONNECTOR
H
N
Center Latch Locations Even Number of Cavities
G
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-5 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Strips with Solid Wire 171-002
MicroStrips™ with Solid Wire These .050" pitch single row microstrips are factory-crimped to gold-plated solid copper wire. Available with 1 to 30 contacts. Can be used for PCB header. Solderdipped versions have 60/40 tin-lead solder. Optional latching mechanism provides secure connection. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
A B C D E F
How To Order Microstrips™ with Solid Wire
J K L
171-002 - Single Row MicroStrip, .050" Contact Spacing, Solid Wire
Number of Cavities
1 to 30 Total number of cavities includesv guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. P Pin Contacts
Contact Type
4 - #24 AWG
Wire Type
C - Solid Copper
Wire Finish
3 - Solder Dipped in 60/40 Tin-Lead
Wire Length (Inches)
.125, .250 .500, 1.000, 1.500, 2.000 Wire Length In Inches ±.200/.000 Omit For No Guide Pin
-5
C
4
-1.000 -P1 CL MH
5 - #25 AWG
6 - #26 AWG 4 - Gold-plated
P1 Guide Pin in Cav. #1
PB Guide Pin at Both Ends
P(x) Replace (X) with guide pin location.
Optional Guide Pin
P3 shown above: Omit For No Latch
CL Center Latch
BL Latch at Both Ends
Optional Latch
P Q
S
S Socket Contacts
Wire Gage
M N
-7
Series
G H
171-002
Sample Part Number
Optional Mounting Holes
Omit For No Mounting Holes
MH Mounting Holes
The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface.
INDEX
NOTE: when ordering "BLMH" Strip Connector allow for only 3 cavaties on each end (6 total)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-6 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Strips with Insulated Wire 171-003
Single Row MicroStrips™ with Insulated Stranded Wire These .050" pitch single row microstrips are factory-terminated to military-grade hookup wire. Crimp termination. Available with 1 to 30 contacts. Optional latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are goldplated. Housing is molded LCP thermoplastic. Available with standard M22759/11 ETFE wire, or upgrade to M22759/33 space grade wire. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. Wire is 600V, 200C. How To Order Single Row Microstrips™ with Insulated Wire -7
Series
171-003 - Single Row MicroStrip
Number of Cavities
1 to 30 Total number of cavities includes guide pins, latches and mounting holes The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option.
S
-6
K
1
-P1 CL MH
Contact Type
Wire Gage
6 - #26 AWG 8 - #28 AWG Note: For 24 gage wire consult factory
Wire Type
K - Standard Wire Extruded PTFE per M22759/11, Silver-Plated Conductors (#30 AWG not available) E - NEMA HP3-EB 600 VRMS Type E M16878/4 (TFE)
J - Space Grade Wire; High Strength Lightweight Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors
Wire Color Code
1 - White 5 - Color-Coded per MIL-STD-681 Wires 1-10 are solid color, 11-up are striped.
7 - 10 Color Repeat Wires are solid color per MIL-STD-681 color code system.
Wire Length (Inches)
Example: 18 =18 inches +1.00/-0.00 (+25.4/-0.0)
G
0 - #30 AWG
PB Guide Pin at Both Ends
H J K
P(x) Replace (X) with guide pin location.
Optional Guide Pin
Optional Latch
Optional Mounting Holes
CL Center Latch
Omit For No Mounting Holes
BL Latch at Both Ends
Q
MH Mounting Holes
High Performance Micro-D Connectors and Cables
M P
NOTE: when ordering "BLMH" Strip Connector allow for only 3 cavaties on each end (6 total) © 2013 Glenair, Inc.
L N
P3 shown above: Omit For No Latch
D F
S Socket Contacts
P1 Guide Pin in Cav. #1
C E
P Pin Contacts
Omit For No Guide Pin
-18
B
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-7 E-Mail:
[email protected]
INDEX
171-003
Sample Part Number
A
Micro-D Latching MicroStrips
A B
Series 171 MicroStrips™ Single Row Strips with Insulated Wire 171-003
PIN CONNECTOR
2Xø.062 (1.57) .125 (3.18)
C
L M
Q
.200 (5.08) REF
.075 (1.91) MAX
.075 (1.91) .075 (1.91)
.075 (1.91)
(A)
(A)
B
B
Table I: Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700
N P
.062 (1.57)
.135/.116 (3.43/2.95)
.110 (2.79) MAX
F
K
.125 (3.18)
MAX
WIRE LENGTH
E
J
C
.050 (1.27) .125 (3.18)
.300 (7.62)
D
H
WIRE LENGTH
.083 (2.10) REF TYP 2Xø.062 (1.57)
.125 (3.18) MAX
.083 (2.10) REF TYP
C
G
SOCKET CONNECTOR
mm. 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78
B Max. In. mm. .085 2.16 .135 3.43 .185 4.70 .235 5.97 .285 7.24 .335 8.51 .385 9.78 .435 11.05 .485 12.32 .535 13.59 .585 14.86 .635 16.13 .685 17.40 .735 18.67 .785 19.94
C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600
mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24
# of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
(A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450
mm. 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83
B Max. In. mm. .835 21.21 .885 22.48 .935 23.75 .985 25.02 1.035 26.29 1.085 27.56 1.135 28.83 1.185 30.10 1.235 31.37 1.285 32.64 1.335 33.91 1.385 35.18 1.435 36.45 1.485 37.72 1.535 38.99
C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350
mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29
Center Latch Locations Even Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
INDEX
Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-8 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Thru-Hole Board Mount Strips 171-004, 171-005, 171-006, and 171-007
Single Row Board Mount MicroStrips™ These .050" pitch single row PCB thru-hole microstrips are available in four typesvertical mount, right angle single row and two right angle staggered versions. Available with 1 to 30 contacts. PC tails are .020" diameter. Optional latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. How To Order Single Row Thru-Hole PCB MicroStrips™ 171-006
Sample Part Number 171-004 Right Angle, Single Row PC Tails
-7
P
-.125
-P1
CL MH
A B C D E
171-005 Right Angle, Two Row PC Tails with .050" Between Rows
F
Series
Number of Cavities
171-007 Vertical Mount
G H
1 to 30 Total number of cavities includes guide pins, latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option.
K
Contact Type
P Pin Contacts
PC Tail Length (In.)
.080, .110, .125, .150, .172, .190, .250 Tail Length In Inches ±.015 Omit For No Guide Pin
J
S Socket Contacts
P1 Guide Pin in Cavity #1
PB Guide Pin at Both Ends
L
P(x) Replace (X) with guide pin location.
M
Optional Guide Pin
N
P3 shown above: Optional Latch
Omit For No Latch
CL Center Latch
Optional Mounting Holes
Omit MH For No Mounting Holes Mounting Holes
BL Latch at Both Ends
P
The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface
Q
NOTE: when ordering "BLMH" Strip Connector allow for only 3 cavaties on each end (6 total)
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-9 E-Mail:
[email protected]
INDEX
171-006 Right Angle, Two Row PC Tails with .100" Between Rows
Micro-D Latching MicroStrips
MWS MicroStrips™ Single Row Thru-Hole Board Mount Strips 171-004, 171-005, 171-006, and 171-007 Dimensions
A B
PIN CONNECTOR
.110 (2.79) MAX
N P Q
.135/.116 (3.43/2.95) .075 (1.91) MAX
.075 (1.91) .075 (1.91)
(A) B
G
M
.062 (1.57)
.125 (3.18)
C
F
L
.125 (3.18)
2Xø.062 (1.57)
E
K
C
.050 (1.27) MAX
.300 (7.62)
D
J
.083 (2.10) REF TYP
2Xø.062 (1.57) .050 (1.27) MAX
.083 (2.10) REF TYP
C
H
SOCKET CONNECTOR
# of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700
mm. 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78
.200 (5.08) REF .075 (1.91)
(A) B
B Max. In. mm. .085 2.16 .135 3.43 .185 4.70 .235 5.97 .285 7.24 .335 8.51 .385 9.78 .435 11.05 .485 12.32 .535 13.59 .585 14.86 .635 16.13 .685 17.40 .735 18.67 .785 19.94
C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600
mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24
# of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
(A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450
mm. 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83
B Max. In. mm. .835 21.21 .885 22.48 .935 23.75 .985 25.02 1.035 26.29 1.085 27.56 1.135 28.83 1.185 30.10 1.235 31.37 1.285 32.64 1.335 33.91 1.385 35.18 1.435 36.45 1.485 37.72 1.535 38.99
C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350
mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29
Center Latch Locations Even Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
INDEX
Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-10 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Board Mount Strips PCB layouts: 171-004 and 171-005
Printed Circuit Board Layouts TYPE
PIN CONNECTOR
A
SOCKET CONNECTOR
B C
171-004 PC TAIL LENGTH
Right Angle Single Row .050" (1.27) Centers
ø.020 (0.51) .100 (2.54)
ø.020 (0.51) .100 (2.54)
.225 (5.72)
.400 (10.16)
.050 (1.27) TYP
CONTACT 1
PC TAIL LENGTH
CONTACT 1
.050 (1.27) TYP
D E F G H J K
171-005 PC TAIL LENGTH
Right Angle Staggered .050" (1.27) Offset
ø.020 (0.51) .050 (1.27) .100 (2.54)
ø.020 (0.51) .050 (1.27)
(.400) PLUG
CONTACT 1 .100 (2.54) TYP .050 (1.27) TYP
PC TAIL LENGTH .100 (2.54)
.225 (5.72)
CONTACT 1
.100 (2.54) TYP .050 (1.27) TYP
L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-11 E-Mail:
[email protected]
Micro-D Latching MicroStrips
A
Series 171 MicroStrips™ Single Row Board Mount Strips PCB Layouts: 171-006 and 171-007
Printed Circuit Board Layouts TYPE
PIN CONNECTOR
SOCKET CONNECTOR
B C D
171-006
ø.020 (0.51) .100 (2.54) .100 (2.54)
PC TAIL LENGTH
E F
ø.020 (0.51) .100 (2.54) .100 (2.54)
PC TAIL LENGTH
.225 (5.72)
.400 (10.16) Right Angle Staggered .100" (2.54) Offset
G
.100 (2.54) TYP
CONTACT 1
CONTACT 1
.100 (2.54) TYP .050 (1.27) TYP
.050 (1.27) TYP
H J K L
171-007
M
.100 (2.54)
.120 (3.05)
ø.020 (0.51)
.100 (2.54)
.120 (3.05)
ø.020 (0.51)
CONTACT 1
N P
PC TAIL LENGTH
PC TAIL LENGTH
1
Vertical Mount .100" (2.54) Spacing
.100 (2.54)
3 2
CONTACT 1
.100 (2.54) 4
6
.050 (1.27)
6
1
3
5
7
7
5
4
.100 (2.54)
2
.100 (2.54) .050 (1.27)
Q INDEX © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-12 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Surface Mount Strips 171-008
Single Row Surface Mount MicroStrips™ These .050" pitch single row surface mount microstrips are available with 1 to 30 contacts. SMT tails are .013" diameter and are solder dipped in 60/40 tin-lead. Optional latching mechanism provides secure connection. Optional guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where longterm resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
How To Order Single Row Thru-Hole PCB MicroStrips™ 171-008
Sample Part Number Series
Number of Cavities
P
-P1
CL
MH
B C D
171-008 - Single Row MicroStrip, .050" Contact Spacing, Surface Mount Tails
E
1 to 30 Total number of cavities includes guide pins, latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option.
F
P Pin Contacts
Contact Type
-5
A
Omit For No Guide Pin
G
S Socket Contacts
P1 Guide Pin in Cavity #1
PB Guide Pin at Both Ends
H
P(x) Replace (X) with guide pin location.
J
Optional Guide Pin
K
P3 shown above: Optional Latch
Omit For No Latch
CL Center Latch
Optional Mounting Holes
Omit MH For No Mounting Holes Mounting Holes
BL Latch at Both Ends
L
The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface
NOTE: when ordering "BLMH" Strip Connector allow for only 3 cavaties on each end (6 total)
M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-13 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Surface Mount Strips 171-008
Dimensions
A B C
PIN CONNECTOR .050 (1.27) TYP
.083 (2.10) REF TYP
2Xø.062 (1.57) C
E
.110 (2.79) MAX
L M N P Q
.125 (3.18)
C
.050 (1.27) TYP .125 (3.18)
.062 (1.57) .135/.116 (3.43/2.95) .075 (1.91) MAX
#28 AWG
.075 (1.91)
.200 (5.08) REF .075 (1.91)
.090 (2.29) .045 (1.14)
(A) B
G
K
.083 (2.10) REF TYP
TYPICAL SURFACE MOUNT CONFIGURATION
.075 (1.91)
F
J
2Xø.062 (1.57) .050 (1.27) MAX
.050 (1.27) MAX
.300 (7.62)
D
H
SOCKET CONNECTOR
# of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700
mm. 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78
B Max. In. mm. .085 2.16 .135 3.43 .185 4.70 .235 5.97 .285 7.24 .335 8.51 .385 9.78 .435 11.05 .485 12.32 .535 13.59 .585 14.86 .635 16.13 .685 17.40 .735 18.67 .785 19.94
C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600
mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24
# of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
(A) B (A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450
mm. 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83
B Max. In. mm. .835 21.21 .885 22.48 .935 23.75 .985 25.02 1.035 26.29 1.085 27.56 1.135 28.83 1.185 30.10 1.235 31.37 1.285 32.64 1.335 33.91 1.385 35.18 1.435 36.45 1.485 37.72 1.535 38.99
C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350
mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29
Center Latch Locations Even Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
INDEX
Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2.
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-14 E-Mail:
[email protected]
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Back-to-Back MicroStrips™ 171-009
Single Row Back-to-Back MicroStrips™ These .050" pitch single row surface mount microstrips are available with 1 to 30 contacts. Optional latching mechanism provides secure connection. Optional guide pins provide circuit polarization. Contacts are TwistPin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
How To Order Single Row Microstrips™ With Insulated Wire -13 CS
-6
K
Series
171-009 - Single Row MicroStrip, .050" Contact Spacing, Surface Mount Tails
Number of Cavities
1 to 30 (See Table I) Total number of cavities includes guide pins, latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option.
Contact Type
GP - Pin Contacts GS - Socket Connector Both Ends CS - Pin Connector to Socket Connector
Wire Gage
6 - #26 AWG
Wire Type
K - Standard Wire Extruded PTFE per M22759/11, Silver-Plated Conductors (#30 AWG not available)
J - Space Grade Wire; High Strength Lightweight Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors
Wire Color
1 - White 5 - Color-Coded per MIL-STD-681 Wires 1-10 are solid color, 11-up are striped.
7 - 10 Color Repeat Wires are solid color per MIL-STD-681 color code system.
Wire Length (Inches)
Example: 18 =18 inches +1.00/-0.00 (+25.4/-0.0) Omit For No Guide Pin
8 - #28 AWG
7
-18 -P1 CL
MH
J K L
P(x) Replace (X) with guide pin location.
M N
P3 shown above:
Optional Latch
Optional Mounting Holes
Omit For No Mounting Holes
BL Latch at Both Ends
P Q
MH Mounting Holes
NOTE: when ordering "BLMH" Strip Connector allow for only 3 cavaties on each end (6 total) © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
E
H
PB Guide Pin at Both Ends
CL Center Latch
D
G
Optional Guide Pin
Omit For No Latch
C
F
0 - #30 AWG
P1 Guide Pin in Cavity #1
B
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-15 E-Mail:
[email protected]
INDEX
171-009
Sample Part Number
A
Micro-D Latching MicroStrips
Series 171 MicroStrips™ Single Row Surface Mount Strips 171-009 Table I: Dimensions
A B
"L" .075 (19.05)
CAVITY 1
2Xø.062 (1.57)
C
.110 (2.79) MAX
E
.125 (3.18)
P Q
.135 (3.43) .116 (2.95) .125 (3.18) MAX
.075 (19.05) TYP
.125 (3.18) MAX
CAVITY 1 (PLUG)
END LATCH (BL)
CAVITY 1 (RECEPTACLE)
CENTER LATCH (CL) ODD NUMBER OF CAVITIES CAVITY 1 (PLUG)
H
N
2Xø.062 (1.57)
CAVITY 1 (RECEPTACLE)
CAVITY 1 (PLUG)
G
M
CAVITY 1
A B
.075 (19.05) TYP
F
L
.075 (19.05) .200 (5.08) .075 (19.05) MAX
B A
D
K
.125 (3.18) C
.075 (19.05)
C
J
.062 (1.57)
.300 (7.62)
CAVITY 1 (RECEPTACLE)
CENTER LATCH (CL) EVEN NUMBER OF CAVITIES LATCH PLACED ON NEXT LOWER CAVITY PRIOR TO CENTERLINE
# Of Cavities
INDEX
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 © 2013 Glenair, Inc.
in. 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.450 0.500 0.550 0.600 0.650 0.700 0.750 0.800 0.850 0.900 0.950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450
A
mm. 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83
in. 0.085 0.135 0.185 0.235 0.285 0.335 0.385 0.435 0.485 0.535 0.585 0.635 0.685 0.735 0.785 0.835 0.885 0.935 0.985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535
B Max
High Performance Micro-D Connectors and Cables
mm. 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99
in. N/A N/A N/A N/A N/A N/A 0.200 0.250 0.300 0.350 0.400 0.450 0.500 0.550 0.600 0.650 0.700 0.750 0.800 0.850 0.900 0.950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350
U.S. CAGE Code 06324
C±.005
mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Q-16 E-Mail:
[email protected]
Micro-D Hermetic
Part No.
Description
83513/01 & 02
/01 & /02 Solder Cup Terminated, Metal Shell Connector
Page L-4
83513/03 & 04
/03 & /04 Pre-Wired Crimp Terminated, Metal Shell Connector
L-5
83513/06 & 07
/06 & /07 Solder Cup Terminated, Plastic Shell Connector
L-7
83513/08 & 09
/08 & /09 Pre-Wired Crimp Terminated, Plastic Shell Connector
L-8
83513/10 & 15
/10 Thru /15 Condensed Right Angle PCB Terminated Connector
L-10
83513/16 & 21
/16 Thru /21 Right Angle PCB Terminated Connector
L-14
83513/22 thru 27 /22 Thru /27 Straight PCB Terminated Connector
L-18
83513/28 thru 33 /28 Thru /33 Condensed Straight PCB Terminated Connectors
L-22
83513/05
L-26
/05 Jackscrew and Jackpost Hardware
171-001
Solder Cup
Q-4
171-002
Solid Wire
Q-6
171-003
Insulated Wire
Q-7
171-004
PCB Right Angle PC Tails on .050 Spacing
Q-9
171-005
PCB Right Angle PC Tails with .050 Between Rows Staggered
Q-9
171-006
PCB Right Angle PC Tails with .100 Between Rows Staggered
Q-9
171-007
PCB Vertical Mount
Q-9
171-008
Surface Mount Strips Connectors
Q-13
171-009
Back-to-Back MicroStrips Connectors
Q-15
177-007
Shorting Plug Assembly
N-3
177-140H
Solder Cup or PC Tail Terminated; Solder, Braze or Weld Mount Connectors
H-6
177-232
Front Mount MIL-DTL-83513 Type, Shell Size 37
H-8
177-704H
Insulated Wire Terminated Solder, Braze or Weld Mount Connectors
H-6
177-705H
Solder Cup or PC Tail Rear Panel Mount Connectors
H-8
177-706H
Insulated Wire Rear Panel Mount Connectors
H-11
177-859
Front Mount MIL-DTL-83513 Type, Shell Size 9-21
H-8
179-013-XX
Stainless Steel Jackscrew Kits with C Clips
N-11
240-030
Solder Cup Connectors
G-7
240-031
PCB Vertical Mount Connectors
G-9
240-032
Pre-Wired with Insulated Wire Connectors
G-14
240-033
Pin-Socket In-Line Filter Adapters
G-16
240-034
PCB Right Angle Connectors
G-18
240-075
Rear Panel Mount Solder Cup Connectors
G-22
240-076
PCB Rear Panel Mount Vertical Connectors
G-24
240-077
Rear Panel Mount Insulated Wire Connectors
G-27
240-078
Rear Panel Mount Condensed Board Right Angle Connectors
G-29
247-379
Filter Edge Board Receptacle
G-30
249-EMITS
EMITS EMI Troubleshooter
G-35
500-010
EMI/RFI Round Cable Entry Backshells
M-6
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Index-1 E-Mail:
[email protected]
A B C D E F G H J K L M N P Q INDEX
Index
Micro-D Hermetic
A B C
Index
Part No.
Description
500-011
EMI/RFI Shield Sock Round Cable Entry Backshell
Page M-10
500-012
Qwik-Ty Strain Relief Backshell
M-25
500-017
Metal Protective Covers with Silicone Rubber Gasket
500-037
Metal Protective Covers with Silicone Rubber Gasket for Rear Panel Mounted Micro-D
500-047
EMI/RFI Elliptical Banding Backshell
500-107
Metal Protective Covers with Silicone Rubber Gaskets
N-5 N-5 M-14 N-7
D
507-035
Potting Shell
M-26
507-088
Composite EMI/RFI Round Cable Entry Backshell
M-12
507-142
EMI/RFI Dual Entry Round Cable Banding Backshell
M-8
E
507-145
EMI/RFI Split Shell Banding Backshell with Screwlocks
M-9
507-146
Round Cable Entry Strain Relief Backshell with Saddle Bar Clamps
M-24
507-175
Straight, Top, and 45° Entry EMI/RFI Elliptical Banding Backshell
M-15
F G
507-178
EMI/RFI Elliptical Split Shell Banding Backshell
M-21
507-198
Saddle Bar Strain-Relief Backshell
M-23
507-296
EMI/RFI Elliptical Metal Shell Backshell
M-19 M-17
507-297
Side Entry EMI/RFI Lightweight Metal Shell Backshell
780-555
“Marshal Bean” Protective Rubber Covers with Tether Rope
N-9
H
2470-1048
Combo Micro-D Filter connector
G-34
GHTM
Back-To-Back Cable Assemblies
J-10
J
GHTM
Right Angle Printed Circuit Board Headers
J-13
GHTM
Solder Cup Connectors
J-3
GHTM
Insulated Wire Connectors
J-7
K L M N P Q
GMDE
Environmentally Sealed Rear Panel Mount Connector
B-23
GMDR
Insulated Wire with Right Angle Exit Connector
B-21
GMLM
MasterLatch™ Latching Micro-D Connector
B-29
GMPM
Solder Cup
F-3
GMPM
Pre-Wired
F-6
GMPM
Printed Circuit Board Connector
F-9
GMR 7580
Vertical Mount Connector
C-32
GMR 7580C
Compact Flange Vertical Mount Connector
C-40
GMR 7590
Right Angle Mount Connector
C-36
GMR 7590C
Compact Flange Right Angle Mount
C-44
GMSM
Solder Cup, Solid Wire and Insulated Wire Connectors
D-2
GMSM
Right Angle PCB Connectors
D-5
GRPM
Solder Cup Terminated Rear Panel Mount Connector
B-2
INDEX
GRPM
Insulated-Wire Rear Panel Connector
B-4
GRPM
Uninsulated Solid Wire Rear Panel Connector Connector
B-6
GRPM-CBR
Condensed Board Right Angle, Rear Panel Mount Connector
C-4
© 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Index-2 E-Mail:
[email protected]
Micro-D Hermetic
Index
Part No.
Description
GRPM-CBS
Condensed Board Straight, Rear Panel Mount Connector
Page C-2
GSWM
Spacewire Cable Assembly with Back-to-Back or Single Ended Wiring
B-27
MLDM
Solder Cup Contacts
E-3
MLDM
Metal Shell Insulated Wire Pigtails
E-5
MLDM
Metal Shell Solid Wire Termination
E-7
MLDM
Metal Shell Back-To-Back Cables
E-9
MLDM
Metal Shell Right Angle Printed Circuit Board
E-11
MWDL
Plastic Shell Solder Cup Termination
E-15
MWDL
Plastic Shell Insulated Wire Pigtails
E-17
MWDL
Plastic Shell Solid Wire Termination
E-19
MWDL
Plastic Shell Back-To-Back Cables
E-21
MWDL
Plastic Shell Right Angle PCB
E-23
MWDM
Solder Cup Connector
B-8
MWDM
Insulated Wire Connector
B-10
MWDM
Back-To-Back Unshielded Cable Assemblies
B-12
MWDM
Shielded Cable Assemblies, Untwisted and Twisted Pair
B-14
MWDM
Uninsulated Wire Connector
B-19
MWDM -BR
Board Right Angle, Thru-Hole Connector
C-10
MWDM2L
Sav-Con® Connector Saver
N-2
Board Straight, Vertical Mount Thru-Hole Connector
C-6
MWDM-CBR
MWDM-BS
Condensed Board Right Angle Mount, Thru-Hole Connector
C-14
MWDM-CBS
Condensed Board Straight .075 Inch Spacing Connector
C-20
MWDM-SMR
Right Angle Surface Mount Connector
C-28
MWEB-128P
Vertical Mount Backplane Connector
P-3
MWEB-128S
Straddle Mount Card-Edge Connector
P-4
MWEB-128S
Right Angle Board Connectors
P-5
MWEB-184P
Vertical Mount Backplane Connector
P-6
MWEB-184S
Straddle Mount Card-Edge Connector
P-7
MWEB-184S
Right Angle Board Connector
P-8
MWEB2L
Pre-Wired and Solder Cup Connectors
P-9
MWKQ2L6 thru 2L9 Quick Disconnect Micro Circular Connectors
P-10
Anti-Static Thermoplastic Dust Caps and Fluorosilicone Interfacial Seals
N-4
Stainless Steel Jackpost Kits, Rear Panel or Rear Panel PCB for Mil Spec and Commercial Parts
N-12
Stainless Steel Jackscrew Kits with E-Rings for Mil Spec and Commercial Parts
N-10
A B C D E F G H J K L M N P INDEX
Q © 2013 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com Index-3 E-Mail:
[email protected]
Why Choose
GLENAIR? O Custuo tstandin mer S g ervice ! rials!
w Mate ty of Ra
Plen
sembly!
In-House As Abundant Machining Capacity!
Huge “
Same-
Day” In
ventory
!
One of North Americ and Machin a's ing
State-of-the-A
rt Plating Cap
Injection n o i t c u d o High-Pring Equipment Mold
abilities
xperienced The Industry's Most Eng Specialists eldi EMI/RFI Braided Shi
Largest CNC Installations Milling
d Printed n a y a r r A r e s for Filt Clean Room cuit Board Assembly Cir
Out of This World
INTERCONNECT SOLUTIONS Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497 Telephone: 818-247-6000 • Fax: 818-500-9912 •
[email protected] www.glenair.com Glenair Power Products Group 860 N. Main Street Extension Wallingford, CT 06492
Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712
Glenair Electric GmbH Schaberweg 28 61348 Bad Homburg Germany
Glenair Italia S.p.A. Via Del Lavoro, 7 40057 Quarto Inferiore – Granarolo dell’Emilia Bologna, Italy
© 2013 Glenair, Inc.
Telephone: 203-741-1115 Facsimile: 203-741-0053
[email protected]
Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England
Telephone: +44-1623-638100 Facsimile: +44-1623-638111
[email protected]
Telephone: 847-679-8833 Facsimile: 847-679-8849
Glenair Nordic AB Gustav III : S Boulevard 46 S - 169 27 Solna Sweden
Telephone: +46-8-50550000 Facsimile: +46-8-50550001
[email protected]
Telephone: 06172 / 68 16 0 Facsimile: 06172 / 68 16 90
[email protected] Telephone: +39-051-782811 Facsimile: +39-051-782259
[email protected]
Printed in U.S.A.
Glenair Iberica C/ La Vega, 16 45612 Velada Spain
Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #2 31200 Toulouse France
Telephone: +34-925-89-29-88 Facsimile: +34-925-89-29-87
[email protected] Telephone: +33-5-34-40-97-40 Facsimile: +33-5-61-47-86-10
[email protected]
HIGH-PERFORMANCE MICRO-D CONNECTORS AND CABLES