Jost Landing Gear Part Master - Benlee

85 downloads 374 Views 77KB Size Report
14 – Gear box full of low temp. grease with seals. 38 – Removable cushion foot for G and G3. 45 – Seals on all shafts. LANDING GEAR. PART NUMBER ...
LANDING GEAR PART NUMBER MASTER Example: A400R T1 17 08

Landing Gear Product Line Prefix

Lube Type

A

__

Mounting Style

Leg Speed

Footwear

Travel

Options

__

__

__

__

__

Standard Lube – 40 *Magnum Lube – 44

01 – Brace ears welded to upper leg 05 – Removable crank 08 – 65° angle grease fitting 14 – Gear box full of low temp. grease with seals 38 – Removable cushion foot for G and G3 45 – Seals on all shafts

Outside Mount – 0 Inside Mount – 1 Universal – 0U †Leave Blank for Both Legs R.H. Two Speed Leg – R L.H. One Speed Leg – L 10” x 10” Cushion Foot 12” x 12” Cushion Foot * Magnum Lube includes: 10” x 10” Low Profile Cushion Foot rd Gear box full of low temperature 9” 3 Disc Wheels grease, sealed shafts and grease 10” x 10” x 4½” Sand Shoe tube over screw. 10” x 10” x 2” Sand Shoe 10” x 12” x 4½” Sand Shoe † When ordering both legs, a crank, crank 10” x 12” x 2” Sand Shoe hanger, brace lugs and a cross shaft are No Footwear included but need to be specified (see over).

14 – 14” Travel 17 – 17” Travel 19 – 19” Travel (For travel dimensions see over)

– G – G1 – G3 – R1 – T – T1 – T2 – T3 – NA

For parts and accessories (see over).

Mounting Style Cushion Foot – “G” Series Frame Width

G1

G

G3

4.50”

4.50”

1.38” Overall Length Outside Mount

Grease Fittings

4.25”

10”x10” Standard

Frame Width 10.3”

10.6”

10”x10”

12”x12”

Low Profile

Sand Shoe – “T” Series T

T2 T3

T1 Overall Length

2.0” Inside Mount Note: Grease fittings always face towards the front with the roadside crank.

4.5”

10”x10”x4 1/2”

10”x12”x4 1/2”

Standard

10”x12”x2”

10”x10”x2”

Low Profile

The right to alter specifications is reserved.

Page 1 of 2 1770 Hayes Street Grand Haven, MI 49417 www.jostinternational.com

Ph. (616) 846-7700 (800) 253-5105 Fax (616) 846-0310

LT JLGPM-01 Rev.C

LANDING GEAR ACCESSORIES Standard Accessories Cross Shaft

Crank Sidefold

Overall Length

From end of input shaft

Example: B10363.59.4

Length

Overall Length (in) Standard Inside Mount= 56.5” Standard Outside Mount= 68.4” (If other length is desired see note below).

Inside Mount – B10363 Outside Mount – B10066

Standard

From end of input shaft

Example: C10592.1 Length 1 – 5 ¼” 2 – 8 ¼” (Standard) 3 – 10 ½” 4 – 17 ¾” 5 – 14 ¾”

Standard – C10592 Sidefold – C10591

Note: Overall length = Frame width – 19.5” (for inside mount) – 7.6” (for outside mount) Inside Mount Example: 78.9” - 19.5” = 59.4” Frame Width = 78.9” Overall Length = 59.4”

Travel Dimensions 11.75 High Gear 12.50 Low Gear 3”

1.75”

Frame Mounting Width 4.5” 4.5”

Crank Hanger

9.0”

1.00”

7.5” 3”

4.5”

3.75”

*See note below *1.0”

2.75”

.62”

5.2”

2.25” 2.25” 2.25” 2.25”

3.88”

2.75” SQ.

14.0”

Length

Order Number B10261

21/32” Dia. (10) Holes .38”

C Upper Hsg. A1-B1 = Standard Footwear

*B Retracted *A Extended

A2-B2 = Low Profile (Sand Shoe) A3-B3 = Low Profile (Cushion Foot)

* Important Note: D Travel 4.5” Standard Sand Shoe

Extended and Retracted dimensions are located from second mounting hole as shown, which is 1.0” from centerline of shaft.

10.0” SQ. Standard D Travel 14” 17” 19”

*Standard Footwear A1-Extended B1-Retracted 42 5/8” 28 5/8” 48 5/8” 31 5/8” 52 5/8” 33 5/8”

*Low Profile (Sand Shoe) A2-Extended B2-Retracted 40 1/8” 26 1/8” 46 1/8” 29 1/8” 50 1/8” 31 1/8”

*Low Profile (Cushion Foot) A3-Extended B3-Retracted 39 3/4” 25 3/4” 45 3/4” 28 3/4” 49 3/4” 30 3/4”

The right to alter specifications is reserved.

C Upper Hsg. 21 15/16” 24 15/16” 26 15/16”

Page 2 of 2 1770 Hayes Street Grand Haven, MI 49417 www.jostinternational.com

Ph. (616) 846-7700 (800) 253-5105 Fax (616) 846-0310

LT JLGPM-01 Rev.C