veljavnost: od. 4.10.2010. OZNAKA. Opis. MIN. KOLIČINA pakiranje. Priporočena
. PC. 1 Electronic heat cost allocator. 1.1 Electronic heat cost allocator - WHE30 ...
veljavnost: od 4.10.2010 OZNAKA
Opis 1 Electronic heat cost allocator
MIN KOLIČINA
pakiranje
Priporočena PC
1.1 Electronic heat cost allocator - WHE30 - Family Note: All remote sensor versions are delivered with complete mounting set for wall fastening.
Measuring principle: Single sensor WHE30 WHE30.FR WHE30.A
Single sensor, compact device, delivery includes pre-installed seal o and heat conductor Single sensor, remote sensor device, delivery includes pre-installed seal Substitute device - Single sensor, compact device, delivery includes pre-installed seal without heat conductor
50 pcs
19,67 34,76
50 pcs
19,68
50 pcs
21,32 39,90
50 pcs
20,31
50 pcs
27,91
Measuring principle: Two sensors device WHE30Z WHE30Z.FR WHE30Z.A
Two sensors, compact device, delivery includes pre-installed seal and heat conductor Two sensors, remote sensor device, delivery includes pre-installed seal Substitute device - Two sensors , compact device, delivery includes pre-installed seal without heat conductor
1.2 Electronic heat cost allocator - optical interface Note: All remote sensor versions are delivered with complete mounting set for wall fastening .
Measuring principle: Single sensor WHE37 WHE37.FR WHE37.A
Single sensor, compact device, with optical interface, delivery includes pre-installed seal and heat conductor Single sensor, remote sensor device, with optical interface, delivery includes preinstalled seal Substitute device - Single sensor, compact device, with optical interface, delivery includes pre-installed seal without heat conductor
41,82 50 pcs
26,78
50 pcs
28,65
Measuring principle: Two sensors device WHE37Z WHE37Z.FR WHE37Z.A
Two sensors, compact device, with optical interface, delivery includes pre-installed seal and heat conductor Two sensors, remote sensor device, with optical interface, delivery includes preinstalled seal Substitute device - Two sensors , compact device, with optical interface, delivery includes pre-installed seal without heat conductor
42,40 50 pcs
28,64
50 pcs
40,83
1.3 Electronic heat cost allocator - Walk By (Radio 868 MHz) Note: All remote sensor versions are delivered with complete mounting set for wall fastening .The compact version is delivered without heat conductor.
Measuring principle: Single sensor WHE465 WHE466.FR
Single sensor, compact device, radio communication based on 868 MHz Walk By Single sensor, remote sensor device, radio communication based on 868 MHz Walk By
72,32
Measuring principle: Two sensors device WHE465Z WHE466Z.FR
Two sensors , compact device, radio communication based on 868 MHz Walk By Two sensors , remote sensor device, radio communication based on 868 MHz Walk By
42,29
50 pcs
74,32
1.4 Electronic heat cost allocator - AMR (Radio 868 MHz) Note: All remote sensor versions are delivered with complete mounting set for wall fastening .The compact version is delivered without heat conductor.
Measuring principle: Single sensor WHE460 WHE467 WHE467.FR
Single sensor, compact device, radio communication based on 868 MHz, without optical interface Single sensor , compact device, radio communication based on 868 MHz, with optical interface Single sensor , remote sensor, radio communication based on 868 MHz, with optical interface
50 pcs
44,04
50 pcs
49,29 64,61
Measuring principle: Two sensors WHE460Z WHE467Z WHE467Z.FR
Two sensors , compact device, radio communication based on 868 MHz, without optical interface Two sensors , compact device, radio communication based on 868 MHz, with optical interface Two sensors , compact device, radio communication based on 868 MHz, with optical interface
50 pcs
45,94
50 pcs
51,13 66,45
1.5 Installation set for electronic heat cost allocator Covers and Seals U12130-2004 WHZ3.B1 WHZ4.B
Spare seal for order no.: WHE30 / WHE46... Cover, large for order no.: WHE30 Cover, large for order no.: WHE46...
02/572 02/574 F12102-2041 F12102-2041/1 F12130-2001/4-2 F12102-2019 FZ253-230 FZ253-200
Welding stud M 3 x 6 mm Welding stud M 3 x 10 mm Welding stud M 3 x 15 mm Welding stud M3 x 16 mm / AlMg3 Heat conductor 4-2 Slotted nut M 3 Pawl nut M3 Shank nut M 3 x 6 mm (Hexagon)
100 pieces 50 pieces 50 pieces
100 pieces 50 pieces 50 pieces
100 pieces 100 pieces 500 pieces 1.000 pieces 50 pieces 500 pieces 1.000 pieces
100 pieces 100 pieces 500 pieces 1.000 pieces 50 pieces 500 pieces 1.000 pieces 1.000 pieces
9,84 52,17 52,17
Installation set for panel radiator 16,03 16,03 21,26 75,36 55,94 59,00 39,00 175,00
Opis
OZNAKA FZ253-210 FZ253-220
Shank nut M 3 x 3 mm (Hexagon) Shank nut M 3 x 9,5 mm (Hexagon)
FZ253-300 FZ253-310 FZ253-320 F12130-2001/4-2 F12105-2061 F12105-2084 F12105-2085 F12105-2086
Slide nut (Trapez 35mm) Slide nut (Trapez 50mm) Slide nut (Trapez 65mm) Heat conductor 4-2 Heat conductor with adapter II / 55 mm (wide) Screw M 4 x 35 mm Screw M 4 x 50 mm Screw M 4 x 70 mm
Priporočena PC 28,34 45,35
MIN KOLIČINA
pakiranje
100 pieces 100 pieces
100 pieces 100 pieces
50 pieces 50 pieces 50 pieces 50 pieces 25 pieces 1.000 pieces 500 pieces 500 pieces
50 pieces 50 pieces 50 pieces 50 pieces 25 pieces 1.000 pieces 500 pieces 500 pieces
41,11 46,76 51,00 55,94 26,20 46,76 32,96 41,33
100 pieces 500 pieces 1 piece
100 pieces 500 pieces 1 piece
16,03 59,00 14,02
50 pieces 1 piece
50 pieces 1 piece
55,94 9,42
1 piece 1 piece 50 pieces 10 pieces 25 pieces 1.000 pieces 500 pieces 500 pieces 1 Tube (3g)
1 piece 1 piece 50 pieces 10 pieces 25 pieces 1.000 pieces 500 pieces 500 pieces 1 Tube (3g)
7,36 7,36 55,94 21,86 26,20 46,76 32,96 41,33 8,50
50 pieces 500 pieces 500 pieces 50 pieces
50 pieces 500 pieces 500 pieces 50 pieces
38,64 17,91 28,99 55,94
Installation accessories for ribbed radiator
Installation accessories for convectors, remote sensor installation 02/572 F12102-2019 F12105-1051
Note: Remote sensor needs to be fixed on the previosly installed convector clamp with Welding stud M 3 x 6 mm Slotted nut M 3 Complete convector clamp
F12130-2001/4-2 WHZ2.FWE
Note: For the installation is necessary to use 2 screws, 2 distance bushes,2 hexagon nuts and 4 spreaders. Heat conductor 4-2 Mounting set complete
FZ253-130 FZ253-120 F12130-2001/4-2 F12130-2016 F12105-2061 F12105-2084 F12105-2085 F12105-2086 FZ253-051
Slide nut for tubular radiators 36 mm Slide nut for tubular radiators 45 mm Heat conductor 4-2 Profile spacer Heat conductor with adapter II / 55 mm (wide) Screw M 4 x 35 mm Screw M 4 x 50 mm Screw M 4 x 70 mm Second glue "ERGO"
FZ253-160 F12105-2076 F10102-2026 F12130-2001/4-2
Square pin Screw M 3 x 25 mm Self-tapping screw C 4,2 x 25 C Heat conductor 4-2
Installation accessories for finned and similar models
Installation accessories for tubular radiators
Installation accessories for aluminium radiators
1.6 Tools for electronic heat cost allocator Tools WHZ2.ML WHZ.MB WHZ.KC FZ201-600
Installation ruler - heat cost allocator Installation manual - heat cost allocator Kc-value library, 3,5" disk Stud welding instrument, works with battery
WHZ3.P1 WHZ3.P2 WHZ3.P3 WFZ.USB-1 ACT20
Programming adapter for WHE30 (fixed day) Programming adapter for WHE30 (Reset fixed day) Programming adapter for WHE30- Family (PC-Version) Special Port Converter RS232 to USB Parametrisation software for measure devices
1 piece 1 piece 1 piece 1 piece
146,00 46,64 37,59 4.474,64
Programming adapter and Software for WHE30-Family 109,00 109,00 294,00 114,70 183,00
Programming adapter and Software for AMR, Radio Metering System, WHE46..-Family ACT20 WHZ4.P0 WHZ3.USB F12150-2018 WFZ.USB-1
183,00 130,50 1.368,80 99,48 114,70
Parametrization software for mearure devices Programming adapter for WHE460... USB Tool Set Infraredadapter (ACT-Ir220L ACTiSYS) Special Port Converter RS232 to USB
2 Water meter 2.1 Domestic water meter 2.1.1 Single-jet 2.1.1.1 Mechanical water meter- single-jet (domestic water meter) Water meter, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4", dry runner,single jet, impeller wheel, mechanical, prepared for communication module
WFK30.D080 WFW30.D080
20 pcs 20 pcs
24,74 28,79
WFK30.D110 WFW30.D110
Water meter, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4", dry runner,single jet, impeller wheel , mechanical, prepared for communication module cold hot
20 pcs 20 pcs
24,74 28,79
WFK30.E130 WFW30.E130
Water meter, Qn = 2,5 m³/h, mounting length 130mm, outside thread 1", dry runner,single jet, impeller wheel, mechanical, prepared for communication module cold hot
20 pcs 20 pcs
34,32 38,35
20 pcs 20 pcs
41,50 41,50
cold hot
2.1.1.2 Mechanical water meter with pulse output - surtace type ( domestic water meter) WFK23.D080 WFK24.D080
Contact water meter, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4", dry runner,single jet, impeller wheel, mechanical cold, Reed with NAMUR cold, Reed without NAMUR
OZNAKA WFW23.D080 WFW24.D080
WFK23.D110 WFK24.D110 WFW23.D110 WFW24.D110
WFK13.E130 WFK14.E130 WFW13.E130 WFW14.E130
Opis hot, Reed with NAMUR hot, Reed without NAMUR Contact water meter, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4", dry runner,single jet, impeller wheel, mechanical, with magnetic shielding cold, Reed with NAMUR cold, Reed without NAMUR hot, Reed with NAMUR hot, Reed without NAMUR Contact water meter, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1", dry runner,single jet, impeller wheel, mechanical cold, Reed with NAMUR cold, Reed without NAMUR hot, Reed with NAMUR hot, Reed without NAMUR
20 pcs 20 pcs
Priporočena PC 45,40 45,40
20 pcs 20 pcs 20 pcs 20 pcs
41,50 41,50 45,40 45,40
20 pcs 20 pcs 20 pcs 20 pcs
50,80 50,80 57,70 50,80
MIN KOLIČINA
pakiranje
2.1.1.3 Electronic water meter - single- jet (domestic water meter) Standard (M-Bus)
WFC21.D080 WFC21.D110 WFC21.E130 WFH21.D080 WFH21.D110 WFH21.E130
Electronic water meter,calculator removable, cable length 1,5 m, single jet, impeller wheel, for communication with M-Bus (conection-set is necessary order.No.: WFZ.MBUSSET ) cold, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" cold, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4" cold, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1" hot, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" hot, Qn = 1,5 m³/h,mounting length 110 mm, outside thread 3/4" hot, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1"
WFC26.D080 WFC26.D110 WFC26.E130 WFH26.D080 WFH26.D110 WFH26.E130
Electronic water meter, calculator removable, cable length 1,5 m, single-jet , impeller wheel, for communication with Radio 868 MHz cold, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" cold, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4" cold, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1" hot, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" hot, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4" hot Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1"
122,40 122,40 126,90 126,00 126,00 131,40
AMR (Radio 868 MHz) 150,61 150,61 153,51 154,31 154,31 157,08
2.1.1.4 Electronic round water meter - single- jet (domestic water meter) AMR (Radio 868 MHz) WFC36.D080 WFC36.D110 WFC36.E130 WFH36.D080 WFH36.D110 WFH36.E130
Electronic round water meter, single-jet , impeller wheel, for communication with Radio 868 MHz cold, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" cold, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4" cold, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1" hot, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" hot, Qn = 1,5 m³/h,mounting length 110 mm, outside thread 3/4" hot, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1"
WFC37.D080 WFC37.D110 WFC37.E130 WFH37.D080 WFH37.D110 WFH37.E130
Electronic water meter, single-jet , impeller wheel, for communication with IrDAinterface cold, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" cold, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4" cold, Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1" hot, Qn = 1,5 m³/h, mounting length 80 mm, outside thread 3/4" hot, Qn = 1,5 m³/h, mounting length 110 mm, outside thread 3/4" hot Qn = 2,5 m³/h, mounting length 130 mm, outside thread 1"
WFZ.P WFZ.R80 WFZ.R110 WFZ.R110-1 WFZ.R130 WFZ.R2 WFZ.R2-1
Self-lock seal neutral (no stamping) Spacer 80 mm, outside thread 3/4" Spacer 110 mm, outside thread 3/4" Spacer 110 mm, outside thread 1" Spacer 130 mm, outside thread 1" 2 Threaded joints ½“ outside thread , union nut ¾“ 2 Threaded joints 3/4“ outside thread , union nut 1“
WFZ.P2 WFZ.P2-1 WZM-V110 WZM-V130 WZM-V165 WZM-V190 WFZ.M WFZ.W
1 pair Profipress threaded G-adapter with SC-Contur, male thread 3/4" x 15 mm 1 pair Profipress threaded G-adapter with SC-Contur, male thread 1" x 18 mm Extention 80mm to 110mm (G3/4 B to G1 B) (Pair with seal) Extention 110mm to 130mm (G3/4 B to G3/4 B) (Pair with seal) Extention 110mm to 165mm (G3/4 B to G3/4 B) (Pair with seal) Extention 110mm to 190mm (G3/4 B to G1 B) (Pair with seal)
06/1191
Adapter kit (chromium crimp connection) for wash-stand installation of water meter Adapter kit ( 3/8"connection right-angle stop cock) for wash-stand installation of water meter Adapter kit for tap water meter Bezel IV chromium-plated for electronic water meter
78,70 78,61 87,91 82,27 82,27 91,93
20 pcs 20 pcs 20 pcs 20 pcs 20 pcs 20 pcs
IrDA-interface 66,76 66,90 81,80 70,42 70,42 85,83
2.1.1.5 Installation set (domestic water meter)
06/1192 WFZ.Z WFZ.B4
100 pieces
100 pieces
1 piece 1 piece 1 piece 1 piece
6,41 5,30 7,06 11,00 10,82 6,10 12,00 16,00 16,20 14,41 8,49 20,72 21,10 47,90 14,60
Magnetic protection cover for contact water meter Adapter kit for water meter for wash-stand installation
8,12 6,41 11,70 13,30
2.1.2 Measuring cell meter 2.1.2.1 Mechanical Water meter - measuring cell (domestic water meter) Water meter, Measuring cell, Qn = 1,5 m³/h, fits to EAS/VAS 2", dry runner multi jet, impeller wheel, mechanical, prepared for communication module
WMK10.D
cold
20 pcs
37,32
OZNAKA WMW10.D
Opis hot
20 pcc
Priporočena PC 41,35
20 pcs 20 pcs 20 pcs 20 pcs
57,30 57,30 61,70 61,70
MIN KOLIČINA
pakiranje
2.1.2.2 Mechanical water meter with pulse output - measuring cell (domestic water meter) WMU12.H WMU17.H WMU22.H WMU27.H
Contact water meter, measuring cell, Qn = 1,5 m³/h, adaptable to EAS/VAS 2", dry running, multi jet, impeller wheel, mechanical cold, Reed with NAMUR cold, Reed without NAMUR hot, Reed with NAMUR hot, Reed without NAMUR
2.1.2.3 Electronic water meter - measuring-cell (domestic water meter) Standard (M-Bus)
WMC21.D WMH21.D
Electronic water meter, calculator removable, cable length 1,5 m, multi-jet impeller wheel, for communication with M-Bus (connection set is necessary order no.: WFZ.MBUSSET ) cold, Qn = 1,5 m³/h hot, Qn = 1,5 m³/h
WMC26.D WMH26.D
Electronic water meter, calculator removable, cable length 1,5 m, multi jet, impeller wheel, communication with radio 868 MHz cold, Qn = 1,5 m³/h hot, Qn = 1,5 m³/h
135,35 139,09
AMR (radio 868 MHz) 169,36 174,17
2.1.2.4 Electronic round water meter - measuring cell (domestic water meter) AMR (radio 868 MHz) WMC36.D WMC36.E WMH36.D WMH36.E
Elektronic round water meter, multi jet, impeller wheel, communication with radio 868 MHz cold, Qn = 1,5 m³/h cold, Qn = 2,5 m³/h hot, Qn = 1,5 m³/h hot, Qn = 2,5 m³/h
WMC37.D WMC37.E WMH37.D WMH37.E
Elektronic round water meter, multi jet, impeller wheel, for communication with IrDA-interface cold, Qn = 1,5 m³/h cold, Qn = 2,5 m³/h hot, Qn = 1,5 m³/h hot, Qn = 2,5 m³/h
102,00 108,75 106,00 112,58
20 pcs 20 pcs 20 pcs 20 pcs
IrDA-interface 89,00 95,57 93,30 100,09
2.1.2.5 Installation sets, tools - measuring cell WMZ.MB1 WMZ.ASK WMZ.ASL WME.L15/H WME.L18/H
WME.G20/OV/H WME.VRING WME.PRODICHT F428090010 WME.FLDICHT WME.EINPUTZ1 WFZ.R2 WFZ.R2-1
EAT,mounting length 130 mm, inside thread (22mm soldering ID), mounting aid, compatible with 2" EAS and VAS systems EAT,mounting length 80 mm, 3/4" inside thread , mounting aid, compatible with 2" EAS and VAS systems EAT,mounting length 130 mm, 1" outside thread , mounting aid, compatible with 2" EAS and VAS systems for Qn 2,5 EAT,mounting length 110 mm, 1/2" outside thread (15mm soldering ID), compatible with 2" EAS and VAS systems without cover, gasket, without mounting aid EAT,mounting length 110 mm, 3/4" outside thread (18mm soldering ID), compatible with 2" EAS and VAS systems without cover, gasket, without mounting aid EAT,mounting length 130 mm, inside thread (22mm soldering ID), compatible with 2" EAS and VAS systems without cover, gasket, without mounting aid EAT,mounting length 80 mm,3/4 inside thread , compatible with 2" EAS and VAS systems without cover, gasket, without mounting aid Cover for the above named EAT Profile gasket 57 x 46 x 4 for EAS and VAS 2" Gasket A16,8/B24 Gasket 56 x 47 x 2,5 (Packing ring 2) Mounting help, complete 2 Threaded joints ½“ outside thread , union nut ¾“ 2 Threaded joints 3/4“ outside thread , union nut 1“
WFZ.P2 WFZ.P2-1 WMZ.TECH WMZ.ALL WMZ.MIN WMZ.MET WMZ.ABB WMZ.ABB-0 WME.D/H WFZ.B1 F13004-1003 WFZW.B1 WFZW.B1-2 WMZ.BK WFZ.B4 WFZ.B6-1
1 pair Profipress threaded G-adapter with SC-Contur, male thread 3/4" x 15 mm 1 pair Profipress threaded G-adapter with SC-Contur, male thread 1" x 18 mm adapter for techem UP90 / vario S adapter for Allmess UP 6000 adapter for Minol MB3 adapter for Brunata/Metrona M307/3 adapter for ABB (MO-C) adapte for ABB (MO-E) Intermediate ring for adaptation to 2" EAS and VAS Cover I complete (squre for all mechanical water meters) Intermidiate ring B for extesion of cover I chromium-plated Rosette round, chromium-plated, outside thread 140mm Rosette round, Radio, outside thread 140mm Blind-top for cover (varnished grey-metallic) Cover IV chromium-plated for electronic water meter Round cover, chromium-plated, including duct and polystyrene ring
WME.L22/H WME.G20/H WME.G22 WME.L15/OV/H WME.L18/OV/H WME.L22/OV/H
164,87 16,41 20,26
Mounting block Siemens Extention set short for mounting block Siemens Extention set long for mounting block Siemens EAT,mounting length 110 mm, 1/2" outside thread (15 mm soldering ID), mounting aid, compatible with 2" EAS and VAS systems EAT,mounting length 110 mm, 3/4" outside thread (18 mm soldering ID), mounting aid, compatible with 2" EAS and VAS systems
24,50 26,70 30,50 25,00 57,50
1 piece
17,50
1 piece
17,50
1 piece
18,50
1 piece 1 piece 1 piece 1 piece 1 piece 1 piece
14,50 7,00 0,60 0,14 0,96 2,90 6,10 12,00 16,00 16,20 22,61 30,61 32,49 24,49 22,61 22,61 38,00 12,30 1,80 16,96 16,95 6,23 13,30 11,60
OZNAKA WFZ.B6-2 F13004-2052 WMZ.DR WFZ.P WFZ.M WMZ.K WMZ.K2 WMZ.K4
Opis Round cover (radio),silver-metallic, including duct and polystyrene ring adapter for fitting of measuring cell meter (WMU*, WMC3*, WMH3*) for using existing bezel adapter for fitting of measuring cell meter (WMK10.D*, WMW10.D*) for using existing bezel Self-lock seal neutral (no stamping) Magnetic protection cover for contact water meter Installation key for measuring cell Installation key 2 for measuring cell Installation key for measuring cell
MIN KOLIČINA
pakiranje
Priporočena PC 15,07 1,42
100 pieces
100 pieces 1 piece 1 piece 1 piece
1,42 6,41 47,90 27,10 59,74 66,83
2.1.3 Valve meter 2.1.3.1 Mechanical valve meter Valve meter(VZ) with fitting, shut-off valve and rosette, Qn = 1,5 m³/h, mechanical, dry runner, impeller wheel, mechanical
WFK20.DVC WFK20.DVN WFW20.DVC WFW20.DVN
WFK20.DVCA WFK20.DVNA WFW20.DVCA WFW20.DVNA
cold, polished chrome plated cold, chrome plated hot, polished chrome plated hot, chromium-plated Valve meter for replacement, Qn = 1,5 m³/h, dry runner, impeller wheel, mechanical cold, polished chrome plated cold, chrome plated hot, polished chrome plated hot, chrome plated
WFK24.DVCA WFK24.DVNA WFK23.DVCA WFK23.DVNA WFW24.DVCA WFW24.DVNA WFW23.DVCA WFW23.DVNA
Contact valve meter for replacement Qn = 1,5 m³/h, dry runner, impeller wheel, mechanical cold, Reed without NAMUR, polished chrome plated cold, Reed without NAMUR, chrome plated cold, Reed with NAMUR, polished chrome plated cold, Reed with NAMUR, chrome plated hot, Reed without NAMUR, polished chrome plated hot, Reed without NAMUR, chrome plated hot Reed with NAMUR, polished chrome plated hot Reed with NAMUR, chrome plated
20 pcs 20 pcs 20 pcs 20 pcs
119,07 95,45 122,84 99,22
20 pcs 20 pcs 20 pcs 20 pcs
56,32 47,83 60,20 51,77
2.1.3.2 Mechanical valve meter with pulse output 72,09 65,19 72,09 65,19 76,17 69,28 76,17 69,28
2.1.3.3 Electronic round valve meter AMR (Radio 868 MHz) WFC36.DVN WFC36.DVC WFH36.DVN WFH36.DVC
Electronic round valve meter, impeller wheel, for communication with Radio 868 MHz cold, Qn = 1,5 m³/h, chrome plated cold, Qn = 1,5 m³/h, polished chrome plated hot, Qn = 1,5 m³/h, chrome plated hot, Qn = 1,5 m³/h, polished chrome plated
WFC37.DVN WFC37.DVC WFH37.DVN WFH37.DVC
Electronic round valve meter, impeller wheel, with IrDA-interface cold, Qn = 1,5 m³/h, chrome plated cold, Qn = 1,5 m³/h, polished chrome plated hot, Qn = 1,5 m³/h, chrome plated hot, Qn = 1,5 m³/h, polished chrome plated
161,68 182,84 165,51 187,65
20 pcs 20 pcs 20 pcs 20 pcs
IrDA-interface 114,52 121,25 118,38 125,10
2.1.3.4 Electronic round valve meter for replacement AMR (Radio 868 MHz) WFC36.DVNA WFC36.DVCA WFH36.DVNA WFH36.DVCA
Electronic round valve meter for replacement, impeller wheel, for communication with Radio 868 MHz cold, Qn = 1,5 m³/h, chrome plated cold, Qn = 1,5 m³/h, polished chrome plated hot, Qn = 1,5 m³/h, chrome plated hot, Qn = 1,5 m³/h, polished chrome plated
148,20 170,32 152,06 174,17
20 pcs 20 pcs 20 pcs 20 pcs
IrDA-interface WFC37.DVNA WFC37.DVCA WFH37.DVNA WFH37.DVCA
Electronic round valve meter for replacement, impeller wheel, with IrDA-interface cold, Qn = 1,5 m³/h, chrome plated cold, Qn = 1,5 m³/h, polished chrome plated hot, Qn = 1,5 m³/h, chrome plated hot, Qn = 1,5 m³/h, polished chrome plated
101,04 107,77 104,90 111,62
2.1.3.5 Valve meter connecting kits, Tools - Valve meter WFZ2.SN1540 WFZ2.SN1590 WFZ2.SN1840 WFZ2.SN1890 WFZ2.SN2240 WFZ2.SN2290 WFZ2.SR15 WFZ2.SR18 WFZ2.VN25 WFZ2.FN15 WFZ2.FN18 WFZ2.FN22 F13011-2055 F13011-2056 WFZ2.MS F13011-2070 F13011-2071
Valve meter connecting kit VZ 1/2", chrome plated (short)40mm Valve meter connecting kit VZ 1/2", chrome plated (long)90mm Valve meter connecting kit VZ 3/4", chrome plated (short)40mm Valve meter connecting kit VZ 3/4", chrome plated (long)90mm Valve meter connecting kit VZ 1", chrome plated(short)40mm Valve meter connecting kit VZ 1", chrome plated(long)90mm Universal rising pipe B1/2" Universal rising pipe B3/4" Extension piece VZ 25 mm, chrome plated Flow direction inverter VZ, 1/2" chrome plated Flow direction inverter VZ, 3/4" chrome plated Flow direction inverter VZ, 1" chrome plated wall rosette 60 mm wall rosette 85 mm
center section für valve meter Installation key for valve meter Hexagon socket screw key 12 for valve meter
2.1.4 Bath tube meter 2.1.4.1 Mechanical bath tube meter
5 pieces 5 pieces 10 pieces
1 piece 1 piece 1 piece
14,03 44,75 14,03 28,35 26,75 43,33 68,12 68,12 74,23 176,17 176,17 176,17 2,84 8,20 3,01 10,00 21,10
Opis
OZNAKA
WFK10.DBC WFK10.DBN WFW10.DBC WFW10.DBN
Bath tube meter, Qn = 1,5 m³/h, cold, 3/4" connecting piece, dry runner, impeller wheel, mechanical cold, polished chrome plated cold, chrome plated hot, polished chrome plated hot, chrome plated
MIN KOLIČINA
pakiranje
Priporočena PC
20 pcs 20 pcs 20 pcs 20 pcs
122,84 116,23 126,61 120,00
20 pcs 20 pcs 20 pcs 20 pcs
188,61 210,75 192,46 214,61
2.1.4.2 Electronic round bath tube meter AMR (Radio 868 MHz) WFC36.DBN WFC36.DBC WFH36.DBN WFH36.DBC
Electronic round bath tube meter, calculator removable, cable length 1,5 m, singlejet , impeller wheel, for communication with Radio 868 MHz cold, Qn = 1,5 m³/h, chrome plated cold, Qn = 1,5 m³/h, polished chrome plated hot, Qn = 1,5 m³/h, chrome plated hot, Qn = 1,5 m³/h, polished chrome plated
WFC37.DBN WFC37.DBC WFH37.DBN WFH37.DBC WFZ.BZES
Electronic round bath tube meter, calculator removable, cable length 1,5 m, singlejet , impeller wheel, with IrDA-interface cold, Qn = 1,5 m³/h, chrome plated cold, Qn = 1,5 m³/h, polished chrome plated hot, Qn = 1,5 m³/h, chrome plated hot, Qn = 1,5 m³/h, polished chrome plated Bath meter replacing piece 3/4"x44
IrDA-interface 175,13 197,28 178,99 202,09 19,42
3 Heat meter, heat-/ cooling meter 3.1 Single-jet 3.1.1 Heat meter 3.1.1.1 Standard (IrDA) - Heat meter
WFQ407.D083 WFQ407.D089 WFM407.B113 WFM407.B119 WFM407.D113 WFM407.D119 WFM407.E133 WFM407.E139
WFO407.D083 WFO407.D089 WFP407.B113 WFP407.B119 WFP407.D113 WFP407.D119 WFP407.E133 WFP407.E139
Heat meter, single jet, impeller wheel, return pipe instalation, cable length 1,5 m, sensor diameter 5,0 mm, communikation with IrDA interface Qp = 1,5 m³/h, mounting length 80 mm, AG 3/4", return temp. sensors not integrated, direct immersion Qp = 1,5 m³/h, mounting length 80 mm, AG 3/4", return temp. sensors not integrated, indirect immersion Qp = 0,6 m³/h, mounting length 110 mm, AG 3/4", return temp. sensors integrated, direct immersion Qp = 0,6 m³/h, mounting length 110 mm, AG 3/4", return temp. sensors integrated, indirect immersion Qp = 1,5 m³/h, mounting length 110 mm, AG 3/4", return temp. sensors integrated, direct immersion Qp = 1,5 m³/h, mounting length 110 mm, AG 3/4", return temp. sensors integrated, indirect immersion Qp = 2,5 m³/h, mounting length 130 mm, AG 1", return temp. sensors integrated, direct immersion Qp = 2,5 m³/h, mounting length 130 mm, AG 1", return temp. sensors integrated, indirect immersion Heat meter, single jet, impeller wheel, flow pipe instalation, cable length 1,5 m, sensor diameter 5,0 mm, communikation with IrDA interface Qp = 1,5 m³/h, mounting length 80 mm, AG 3/4", flow temp. sensor not integrated, direct immersion Qp = 1,5 m³/h, mounting length 80 mm, AG 3/4", flow temp. sensor not integrated, indirect immersion Qp = 0,6 m³/h, mounting length 110 mm, AG 3/4", flow temp. sensor integrated, direct immersion Qp = 0,6 m³/h, mounting length 110 mm, AG 3/4", flow temp. sensor integrated, indirect immersion Qp = 1,5 m³/h, mounting length 110 mm, AG 3/4", flow temp. sensor integrated, direct immersion Qp = 1,5 m³/h, mounting length 110 mm, AG 3/4", flow temp. sensor integrated, indirect immersion Qp = 2,5 m³/h, mounting length 130 mm, AG 3/4", flow temp. sensor integrated, direct immersion Qp = 2,5 m³/h, mounting length 130 mm, AG 3/4", flow temp. sensor integrated, indirect immersion
10 pcs
174,56
10 pcs
174,09
10 pcs
171,05
10 pcs
171,05
10 pcs
169,20
10 pcs
170,89
10 pcs
174,83
10 pcs
174,83
10 pcs
175,00
10 pcs
174,09
10 pcs
181,00
10 pcs
181,00
10 pcs
175,00
10 pcs
175,00
10 pcs
185,00
10 pcs
182,32
10 pcs
198,90
10 pcs
207,42
10 pcs
232,29
10 pcs
204,30
10 pcs
212,40
10 pcs
198,90
10 pcs
207,00
10 pcs
199,57
3.1.1.2 Standard (M-Bus) - Heat meter
WFQ21.D081 WFQ21.D082 WFQ21.D087
WFM21.B111 WFM21.B112
WFM21.D111 WFM21.D112 WFM21.D115
Heat meter, calculator removable, cable length 1,5 m, single jet, impeller wheel, for communication with M-Bus is made(Connection set order no.: WFZ.MBUSSET is necessary) as above, but Qp = 1,5 m³/h, mounting length 80 mm, 3/4"outside thread, return temp. sensors not integrated) Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor 2,5 m Temp. sensor direct immersion, length of the cable from temp. sensor 1,5 m, 5,2 mm temp. sensor as above, but Qp = 0,6m³/h, mounting length110 mm, 3/4"outside thread, return temp. sensor is integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5m³/h, mounting length110 mm, 3/4"outside thread, return temp. sensor is integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m
Opis
OZNAKA WFM21.D116 WFM21.D117
WFM21.E131 WFM21.E132 WFM21.E135 WFM21.E136 WFM21.E137
WFP21.B111 WFP21.B112
WFP21.D111 WFP21.D112
WFP21.E131 WFP21.E132
Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor as above, but Qp = 2,5m³/h, mounting length130 mm, 1"outside thread, return temp. sensor is integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor Heat meter, calculator removable, cable length 1,5 m, single jet, impeller wheel, flow pipe instalation, for communication with M-Bus is made(Connection set order no.: WFZ.MBUSSET is necessary) as above, but Qp = 0,6m³/h, mounting length110 mm, 3/4"outside thread, flow temp. sensor is integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5m³/h, mounting length110 mm, 3/4"outside thread, flow temp. sensor is integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 2,5m³/h, mounting length130 mm, 1"outside thread, flow temp. sensor is integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m
MIN KOLIČINA
pakiranje
Priporočena PC
10 pcs
207,42
10 pcs
232,29
10 pcs
208,29
10 pcs
215,10
10 pcs
208,29
10 pcs
216,13
10 pcs
242,17
235,00 244,00
229,27 238,00
239,00 248,00
3.1.1.3 AMR (Radio 868 MHz) - heat meter
WFM26.D111
Heat meter, calculator removable, cable length 1,5 m, single-jet, impeller wheel, for communication with Radio 868 MHz as above, but Qp = 1,5 m³/h, Mounting length 80 mm, outside thread 3/4", return temp. sensor not integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor as above, but Qp = 0,6 m³/h, mounting length 110 mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5 m³/h, mounting length 110 mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m
WFM26.D112
m
WFQ26.D081 WFQ26.D082 WFQ26.D087
WFM26.B111 WFM26.B112
10 pcs
225,00
10 pcs
235,31
10 pcs
263,91
10 pcs
232,69
10 pcs
240,53
10 pcs
226,59
10 pcs
235,31
10 pcs
226,59
10 pcs
235,31
10 pcs
263,91
10 pcs
235,31
10 pcs
244,02
10 pcs
235,31
10 pcs
244,02
10 pcs
273,80
10 pcs
256,00
Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5
WFM26.D115 WFM26.D116 WFM26.D117
Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor as above, but Qp = 2,5 m³/h, Mounting length 130mm, outside thread 1", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5
WFM26.E131
m
WFM26.E132
m
Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5
WFM26.E135 WFM26.E136 WFM26.E137
Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor
3.1.1.4 Heat meter with pulse output
WFQ24.D081
Heat meter with pulse output (Note: Connection Set Order no.: WFZ.MBUSSET is necessary), calculator removable, cable length 1,5 m, single jet, impeller wheel as above, but Qp = 1,5 m³/h, mounting length 80mm, outside thread 3/4", return temp. sensor not integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m
Opis
OZNAKA
MIN KOLIČINA
pakiranje
Priporočena PC
Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5
WFQ24.D082
m
10 pcs
265,00
10 pcs
263,91
10 pcs
232,69
10 pcs
240,53
10 pcs
225,00
10 pcs
235,31
10 pcs
231,68
10 pcs
239,77
10 pcs
263,91
10 pcs
233,10
10 pcs
244,02
10 pcs
240,29
10 pcs
248,38
10 pcs
273,80
10 pcs
199,57
10 pcs
207,42
10 pcs
204,30
10 pcs
212,40
10 pcs
198,90
10 pcs
207,00
10 pcs
199,57
10 pcs
207,42
10 pcs
207,00
10 pcs
215,10
10 pcs
208,29
10 pcs
216,13
10 pcs
226,59
10 pcs
235,31
10 pcs
232,69
10 pcs
240,53
Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m,
WFQ24.D087
WFM24.B111 WFM24.B112
WFM24.D111 WFM24.D112 WFM24.D115 WFM24.D116 WFM24.D117
WFM24.E131 WFM24.E132 WFM24.E135 WFM24.E136 WFM24.E137
5,2 mm temp. sensor as above, but Qp = 0,6 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cablefrom temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor as above, but Qp = 2,5 m³/h, Mounting length 130mm, outside thread 1", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m, 5,2 mm temp. sensor
3.1.2 Combined heat-/ cooling meter 3.1.2.1 Standard (M-Bus) - combined heat/ cooling meter
WFR21.D081 WFR21.D082
WFN21.B111 WFN21.B112
WFN21.D111 WFN21.D112 WFN21.D115 WFN21.D116
WFN21.E131 WFN21.E132 WFN21.E135 WFN21.E136
Heat/cooling meter, calculator removable, cable length 1,5 m, single jet , impeller wheel, for communication with M-Bus C566 (Connection set order no: WFZ.MBUSSET is necessary) as above, but Qp = 1,5 m³/h, mounting length 80mm, outside thread 3/4", return temp. sensor is not integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 0,6 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 2,5 m³/h, Mounting length 130mm, outside thread 1", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m
3.1.2.2 AMR (Radio868 MHz) - combined heat/cooling meter
WFR26.D081 WFR26.D082
WFN26.B111 WFN26.B112
Heat / cooling meter, calculator removabl, cable length 1,5 m, single jet, impeller wheel, communication with Radio 868 MHz as above, but Qp = 1,5 m³/h, mounting length 80mm, outside thread 3/4", return temp. sensor not integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 0,6 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated
Opis
OZNAKA
MIN KOLIČINA
pakiranje
Priporočena PC
Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5
WFN26.D111
m
10 pcs
226,59
10 pcs
235,31
10 pcs
226,59
10 pcs
235,31
10 pcs
235,31
10 pcs
244,02
10 pcs
235,31
10 pcs
244,02
10 pcs
226,59
10 pcs
235,31
10 pcs
232,69
10 pcs
240,53
10 pcs
226,59
10 pcs
235,31
10 pcs
256,99
10 pcs
266,87
10 pcs
235,31
10 pcs
244,02
10 pcs
266,87
10 pcs
276,75
Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5
WFN26.D112 WFN26.D115 WFN26.D116
WFN26.E131 WFN26.E132 WFN26.E135 WFN26.E136
m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 2,5 m³/h, Mounting length 130mm, outside thread 1", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m
3.1.2.3 Combined heat/cooling meter with pulse output
WFR24.D081 WFR24.D082
WFN24.B111 WFN24.B112
WFN24.D111 WFN24.D112 WFN24.D115 WFN24.D116
WFN24.E131 WFN24.E132 WFN24.E135 WFN24.E136
Heat/cooling meter with pulse output, (Connection set order no: WFZ.MBUSSET is necessary)calculator removable, cable length 1,5 m, single jet , impeller wheel as above, but Qp = 1,5 m³/h, mounting length 80mm, outside thread 3/4", return temp. sensor not integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 0,6 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 1,5 m³/h, mounting length 110mm, outside thread 3/4", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m as above, but Qp = 2,5 m³/h, Mounting length 130mm, outside thread 1", return temp. sensor integrated Temp. sensor direct immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor direct immersion, length of the cable from temp. sensor cable 2,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 1,5 m Temp. sensor indirect immersion, length of the cable from temp. sensor cable 2,5 m
3.1.3 Accessories for single-jet meter WFZ.P WFZ.R80 WFZ.R110 WFZ.R110-1 WFZ.R130 WFZ.R2 WFZ.R2-1
Self-lock seal neutral (no stamping) Spacer 80 mm, AG 3/4" Spacer 110 mm, outside thread 3/4" Spacer 110 mm, outside thread 1" Spacer 130 mm, outside thread 1" 2 threaded joints1/2" outside thread,union nut 3/4" 2 threaded joints3/4" outside thread,union nut 1"
WFZ.P2 WFZ.P2-1 WZM-V110 WZM-V130 WZM-V165 WZM-V190
1 pair Profipress threaded G-adapter with SC-Contur, male thread 3/4" x 15 mm 1 pair Profipress threaded G-adapter with SC-Contur, male thread 1" x 18 mm Extention 80mm to 110mm (G3/4 B to G1 B) (Pair with seal) Extention 110mm to 130mm (G3/4 B to G3/4 B) (Pair with seal) Extention 110mm to 165mm (G3/4 B to G3/4 B) (Pair with seal) Extention 110mm to 190mm (G3/4 B to G1 B) (Pair with seal) Installation kit for 80mm mounting length, outside thread 1/2", flow temp. sensor in ball valve Installation kit for 80mm mounting length, outside thread 3/4", flow temp. sensor in ball valve Installation kit for 110mm mounting length, outside thread 1/2", flow temp. sensor in ball valve Installation kit for 110mm mounting length, outside thread 1/2", flow temp. sensor in protection pocket Installation kit for 110mm mounting length, outside thread 3/4", flow temp. sensor in ball valve Installation kit for 110mm mounting length, outside thread 3/4", flow temp. sensor in protection pocket Installation kit for 130mm mounting length, outside thread 3/4", flow temp. sensor in ball valve Installation kit for 130mm mounting length, outside thread 3/4", flow temp. sensor in protection pocket Installation kit for 130mm mounting length, outside thread 1", flow temp. sensor in ball valve Installation kit for 130mm mounting length, outside thread 1", flow temp. sensor in protection pocket Ball valve 1/2" inside thread with sensor seat Ball valve 3/4" inside thread with sensor seat
WFZ.E80 WFZ.E80G3 WFZ.E110-I WFZ.E110-IT WFZ.E110G3-I WFZ.E110G3-IT WFZ.E130-I WFZ.E130-IT WFZ.E130G1-I WFZ.E130G1-IT WFZ.K15 WFZ.K18
100 pieces
100 pieces
1 piece 1 piece 1 piece 1 piece
6,41 5,30 7,06 11,00 10,82 6,10 12,00 15,07 15,28 14,41 8,49 20,72 21,10 56,31 58,65 51,60 55,55 56,00 57,61 72,20 71,76 86,00 90,00 16,40 21,00
OZNAKA WFZ.K22 WFZ.K16 WFZ.K17 WFZ.T16 WFZ.T19 WFZ.T22 WFZ.T16/M WFZ.T19/M WFZ.T22/M WFZ.T50 WFZ.T52 WZT-A12 WZT-A34 F15205-2078 F15205-2070 F15203-2027 F15102-2006 WFZ.B4
Opis
MIN KOLIČINA
pakiranje
Ball valve 1" inside thread with sensor seat Ball valve 1/2" inside thread with union nut inside thread 3/4 with sensor seat Ball valve1/2" inside thread with union nut 3/4" inside thread without sensor seat Immersion sleeve with T-piece, inside thread 1/2" Immersion sleeve with T-piece, inside thread 3/4" Immersion sleeve with T-piece, inside thread 1" Immersion sleeve installation kit MID (IS M10x1 und IS G1/4") with T-piece, inside thread 1/2" Immersion sleeve installation kit MID (IS M10x1 und IS G1/4") with T-piece, inside thread 3/4" Immersion sleeve installation kit MID (IS M10x1 und IS G1/4") with T-piece, inside thread 1" Immersion sleeve installation kit MID with IS M10x1 and IS 1/4" 5,0mm Immersion sleeve installation kit MID with IS M10x1 and IS 1/4" 5,2mm Accessories for T-sensor DS M10 x 1 mm x G1/2" (Export) Accessories for T-sensor DS M10 x 1 mm x G3/4" (Export) half shell screw for temperature sensors Protection pocket G1/4" Protection pocket adapter 1/4" inside thread to 1/2" outside thread Sensor adapter for protection sleeve to 6 mm (Export) Bezel IV, chromium-plated
Priporočena PC 34,80 18,74 17,22 19,50 16,20 20,90 21,68 23,57
50 pieces
50 pieces
30,61 12,72 12,72 10,38 13,19 39,57 6,61 2,03 2,17 13,30
3.2 Measuring cell 3.2.1 Heat meter 3.2.1.1 Standard (IrDA) - Heat meter Heat meter, measuring cell principle (multijet), impeller wheel, return pipe instalation, return sensor integrated, temp. sensor indirect immersion (sensor diameter 5,0 mm), cable length 1,5m, adaptible to EAS and VAS 2"-System, communikation with IrDA interface
WMM407.D003 WMM407.E003
WMP407.D003
Qp = 1,5 m³/h Qp = 2,5 m³/h Heat meter, measuring cell principle (multijet), impeller wheel, flow pipe instalation, temp. sensor integrated, return sensor indirect immersion (sensor diameter 5,0 mm), cable length 1,5m, adaptible to EAS and VAS 2"-System, communikation with IrDA interface Qp = 1,5 m³/h
10 pcs
182,54 192,78
10 pcs
180,58
10 pcs 10 pcs
206,64 218,99
10 pcs 10 pcs
243,77 252,67
10 pcs 10 pcs
238,46 246,55
10 pcs 10 pcs
274,38 284,23
10 pcs 10 pcs
264,49 274,38
10 pcs 10 pcs
211,55 242,78
10 pcs
243,77
10 pcs
3.2.1.2 Standard (M-Bus) - Heat meter Heat meter, measuring cell principle (multijet), Qp = 1,5 m³/h, calculator removable, impeller wheel, return sensor integrated, temp. sensor indirect immersion (Diameter 5,0 mm), adaptible to EAS and VAS 2"-System, for the communication with M-Bus is made (Connection set order no: WFZ.MBUSSET is necessary)
WMM31.D001 WMM31.D002
WMM31.E001 WMM31.E002
Length of the temp. Sensor 1,5 m Length of the temp. sensor 2,5 m Heat meter, measuring cell principle (multijet), Qp = 2,5 m³/h, calculator removable, impeller wheel, return sensor integrated, temp. sensor indirect immersion (Diameter 5,0 mm), adaptible to EAS and VAS 2"-System, for the communication with M-Bus is made (Connection set order no: WFZ.MBUSSET is necessary) Length of the temp. Sensor 1,5 m Length of the temp. sensor 2,5 m
3.2.1.3 AMR (Radio 868 MHz) - heat meter
WMM36.E001 WMM36.E002
Heat meter, cable length 1,5m, calculator removable, measuring cell principle (multijet),impeller wheel, communication with Radio 868 MHz, Qp=1,5 m³/h return sensor integrated, temp. sensor indirect immersion Length of the temp. sensor 1,5 m Length of the temp. sensor 2,5 m Heat meter, cable length 1,5m, calculator removable, measuring cell principle (multijet),impeller wheel, communication with Radio 868 MHz, Qp=2,5 m³/h return sensor integrated, temp. sensor indirect immersion Length of the temp. sensor 1,5 m Length of the temp. sensor 2,5 m
WMM34.D001 WMM34.D002
Heat meter, measuring cell principle (multijet), Qp=1,5 m³/h, calculator removable, impeller wheel, communication with pulse output, return sensor integrated, temp. sensor indirect immersion Length of the temp. sensor 1,5 m Length of the temp. sensor 2,5 m
WMM36.D001 WMM36.D002
3.2.1.4 Heat meter with pulse output
3.2.2 Combined heat/ cooling meter 3.2.2.1 Standard (M-Bus) - combined heat-/ cooling meter
WMN31.D001 WMN31.D002
WMN31.E001
Heat-/cooling meter, measuring cell principle (multijet), Qp= 1,5 m³/h, calculator removable, impeller wheel, return sensor integrated, temp. sensor indirect immersion (diameter 5,0 mm), adaptable to EAS and VAS 2"-System, for communication with M-Bus is made (Connection-set order-no.: WFZ.MBUSSET is necessary) Length of the temp. sensor 1,5 m Length of the temp. sensor 2,5 m Heat-/cooling meter, measuring cell principle (multijet), Qp = 2,5 m³/h, calculator removable, impeller wheel, return sensor integrated, temp. sensor indirect immersion (Diameter 5,0 mm), adaptible to EAS and VAS 2"-System, for the communication with M-Bus is made (Connection set order no: WFZ.MBUSSET is necessary) Length of the temp. Sensor 1,5 m
3.2.2.2 AMR (Radio 868 MHz) -combined heat/cooling meter
Opis
OZNAKA
WMN36.D001 WMN36.D002
Heat/ cooling meter, calculator removable,cable length 1,5m, measuring cell principle (multijet), impeller wheel, communication with Radio 868 MHz, Qp=1,5 m³/h return temp. sensor integrated, indirect immersion Length of the temp. sensor 1,5 m Length of the temp. sensor 2,5 m
WMN34.D001 WMN34.D002
Heat-/cooling meter, measuring cell principle (multijet), Qp= 1,5 m³/h, calculator removable, impeller wheel, communication with pulse output, return sensor integrated, temp. sensor indirect immersion Length of the temp. sensor 1,5 m Length of the temp. sensor 2,5 m
MIN KOLIČINA
pakiranje
Priporočena PC
10 pcs 10 pcs
264,49 274,38
10 pcs 10 pcs
264,49 274,38
3.2.2.3 Combined heat/cooling meter with pulse output
3.2.3 Measuring-cell meter accessories WMZ.MB1 WMZ.ASK WMZ.ASL WMZ.E15/H WMZ.E18/H WME.L15/H WME.L18/H
Mounting block Siemens Single jet set, short,cold water for mounting block Single jet set, long,cold water for mounting block Return pipe installation kit 1/2" Return pipe installation kit 3/4" EAT,mounting length 110 mm, 1/2"outside thread (15 mm soldering ID), mounting aid, compatible with 2" EAS/VAS systems EAT,mounting length 110 mm, 3/4"outside thread (18 mm soldering ID), mounting aid, compatible with 2" EAS/VAS systems
WME.L22/OV/H
130 mm meter body, inside thread 22 mm soldering , mounting aid, compatible with 2"EAS/VAS Systems EAT,mounting length 80 mm, 3/4" inside thread , mounting aid, compatible with 2" EAS and VAS systems 80 mm meter body, 3/4 inside thread, mounting aid, compatible with 2"EAS/VAS Systems EAT,mounting length 110 mm, 1/2"outside thread (15 mm soldering ), compatible with 2" EAS/VAS systems, without dummy cover, without gascket, without mounting aid EAT,mounting length 110 mm, 3/4"outside thread (18 mm soldering), compatible with 2" EAS/VAS systems, without dummy cover, without gascket, without mounting aid EAT, 130 mm meter body, inside thread 22 mm soldering, mounting aid, compatible with 2"EAS/VAS Systems, without dummy cover, without gascket, without mounting aid
WME.G20/OV/H WME.VRING WME.PRODICHT WME.EINPUTZ1 WFZ.R2 WFZ.R2-1
EAT, 80 mm meter body, 3/4 inside thread, mounting aid, compatible with 2"EAS/VAS Systems, without dummy cover, without gascket, without mounting aid Closure for the above named parts Profile gasket 57 x 46 x 4 for EAS and VAS 2" Mounting help, complete 2 Threaded joints ½“ outside thread , union nut ¾“ 2 Threaded joints 3/4“ outside thread , union nut 1“
WFZ.P2 WFZ.P2-1 WFZ.B4 WME.FLDICHT F15203-2027 WMZ.K WMZ.K2 WMZ.K4 WME.D/H
1 pair Profipress threaded G-adapter with SC-Contur, male thread 3/4" x 15 mm 1 pair Profipress threaded G-adapter with SC-Contur, male thread 1" x 18 mm Cover IV chromium-plated for electronic water meter Gasket 56 x 47 x 2,5 (Packing ring 2) Protection pocket adapter 1/4" inside thread to 1/2" outside thread Installation key for measuring cell Installation key 2 for measuring cell Installation key for measuring cell Intermidiate ring for adaptation to 2" EAS and VAS
WME.L22/H WME.G20/H WME.G22 WME.L15/OV/H WME.L18/OV/H
1 piece 1 piece
164,87 16,41 20,26 56,52 65,01 24,50 26,70 30,50 25,00 57,50 17,50 17,50 18,50
1 piece
1 piece 1 piece 1 piece
14,50 7,00 0,60 2,90 6,10 12,00 16,00 16,20 13,30 0,96 2,03 27,10 59,74 66,83 38,00
3.3 Programming tools for heat meters and combined heat/ cooling meters Based on PC WFZ.MBM WHZ3.USB F12150-2018 WFZ.USB-1 ACT20
614,00 1.368,80 99,48 114,70 183,00
Programming adapter; M-Bus Mini Master USB Tool Set Infraredadapter (ACT-Ir220L ACTiSYS) Special Port Converter RS232 to USB Parametrisation software for measure devices
3.4 Ultrasonics heat meter - (on request)
4 System 4.1 System for remote data readout WalkBy (868 MHz) 4.1.1 Electronic heat cost allocator WHE46...
Electronic head cost allocator you can find in part 1.3
WFZ166.MO WFZ.BS-MO WFZ166.AL WFZ.BS-AL WFZ166.DM WFZ.BS-DM WFZ166.EL WFZ.BS-EL WFZ166.WG WFZ.BS-WG
walk-by radio adapter Modularis (series WFx30, WMK10 and WMW10) Replacement seals for WFZ16x.MO walk-by radio adapter Allmess (series MK +m, V +m) Replacement seals for WFZ16x.AL Walk By radio adapter Deltamess (series Delta-AP-Funk-V, Delta-TK-Funk-V) Replacement seals for WFZ16x.DM Walk By radio adapter Elster (series EV-A, MO-A, MOZ-A) Replacement seals for WFZ16x.EL Walk By radio adapter Wassergeräte (series ETW) Replacement seals for WFZ16x.WG
4.1.2 Radio adapter 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs
1 pack (10 pieces) 1 pack (10 pieces) 1 pack (10 pieces) 1 pack (10 pieces) 1 pack (10 pieces)
65,30 7,54 65,30 7,54 65,30 7,54 65,30 7,54 65,30 7,54
4.1.3 Radio adapter heat meter WFZ166.OK
walk-by radio adapter for heat meter (series G20/21, G54/55/58, R20/21/28), integrated antenna
99,98
Opis
OZNAKA WFZ166.OF
MIN KOLIČINA
pakiranje
walk-by radio adapter for heat meter (series G20/21, G54/55/58, R20/21/28), external antenna
Priporočena PC 128,63
4.1.4 Tools WTZ.WBSET-2/PC WFZ.PS FZ201-009
walk-by radio communication (Bluetooth-Stick, Software ACT46, mobil data collector with bag) Starting tool radio telegrams Torque Screwdriver "Torx Plus™"
1.673,65 206,01 190,17
4.2 System for remote data readout - AMR (868 MHz) 4.2.1 Electronic heat cost allocator WHE46..
Electronic heat cost allocator you can find in part 1.2
WFH/C26..., WMH/C26....
Electronic water meter you can find in part 2.1.1.3
WFH/C36..., WMH/C36....
Electronic round water meter you can find in part 2.1.1.4
WFM26....
Electronic heat meter you can find in part 3.1.1.2
AEW36.2
Pulse adapter for integration of used meters with pulse output in AMR system; two meters can be connected; for use of parametrisation of ACS20
4.2.2 Electronic water meter 4.2.3 Electronic round water meter 4.2.4 Heat meter 4.2.5 Pulse adapter 87,80
4.2.6. Radio adapter WFZ166.MO WFZ.BS-MO WFZ166.AL WFZ.BS-AL WFZ16.DM WFZ.BS-DM WFZ16.EL WFZ.BS-EL WFZ16.WG WFZ.BS-WG
walk-by radio adapter Modularis (series WFx30, WMK10 and WMW10) Replacement seals for WFZ16x.MO walk-by radio adapter Allmess (series MK +m, V +m) Replacement seals for WFZ16x.AL AMR radio adapter Deltamess (series Delta-AP-Funk-V, Delta-TK-Funk-V) Replacement seals for WFZ16x.DM AMR radio adapter Elster (series EV-A, MO-A, MOZ-A) Replacement seals for WFZ16x.EL AMR radio adapter Wassergeräte (series ETW) Replacement seals for WFZ16x.WG
10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs 10 pcs
0,00 1 pack (10 pieces) 0,00 1 pack (10 pieces) 1 pack (10 pieces) 1 pack (10 pieces) 1 pack (10 pieces)
65,30 7,54 65,30 7,54 64,90 7,54 64,90 7,54 64,90 7,54
4.2.7 Radio adapter heat meter WFZ166.OK WFZ166.OF
walk-by radio adapter for heat meter (series G20/21, G54/55/58, R20/21/28), integrated antenna walk-by radio adapter for heat meter (series G20/21, G54/55/58, R20/21/28), external antenna
99,98 128,63
4.2.8 System components Network nodes with interface for local readout WTT16 WTT16.232 WTX16 WTX16.232
306,90
Network nodes with battery driven (local readout via M-Bus is possible) Network nodes with battery driven and RS232 interface (local readout via RS232 and M-Bus is possible) Network nodes with main supply (local readout via M-Bus is possible) Network nodes with main supply and RS232 interface (local readout via RS232 and M-Bus is possible)
394,79 388,69 477,58
Network nodes with interface for remote readout WTX16.GSM WTX16.IP WTX16.MOD-1 U12102-2003
Network with mains supply, Gateway and GSM-Module for remote readout via PSTN Network with mains supply, Gateway and interface for remote readout via EthernetNetwork Network with mains supply with external antenna, Gateway for max. 1 network and 500 devices and GSM-Module for remote readout via PSTN Seal for order no.: WHE2xx.xx
1.923,31 1.820,50
100 pieces
100 pieces
1.156,23 9,84
4.2.9 Tools, Software and Batteries Hardware WTZ.RM WFZ.PS WTZ.K232 WFZ.MBM WHE26.Demo WHZ3.USB F12150-2018 FZ201-009
PC-Radio Module with operational software and USB cable for putting into service and wireless remote readout from AMR System Starting tool radio telegrams Connection cable RS232; 2,5 m; mini-DIN - 9pol. Sub-D (for WTT16.232 and WTX16.232)) Programming adapter; M-Bus Mini Master Test radio transmitter 868MHz USB Tool Set Infraredadapter (ACT-Ir220L ACTiSYS) Torque Screwdriver "Torx Plus™"
2.447,60 206,01 41,30 614,00 203,00 1.368,80 99,48 190,17
Software (usable from Windows 9x and further) ACT20 ACS26 ACT26 ACT21
Parametrisation software for meters Readout software for AMR System Operational- and service software for AMR System Parametrization software for Gateway (WTX16.GSM and WTX16.IP) inkl. connection cable
183,00 167,40 586,74 140,39
Batteries WTZ.BAT FBCRAA/KS
Main battery for WTT16... (3,6V / 13 Ah) Back-up battery for WT*16...
4.3 System for remote readout - M-Bus metering System 4.3.1 Electronic water meter WFC/H21.., WMC/H21..
The information about electronic water meter you can find in 2.1.1.3 part and in product catalogue on the page 20. Note: Please, use water meter (Wxx21xxx) with connection set (order no.: WFZ.MBUSSET).
4.3.2 Heat meter WFM21....
The information about electronic water meter you can find in 3.1.1.1 part and in product catalogue on the page 37.
51,24 12,30
Opis
OZNAKA
MIN KOLIČINA
pakiranje
Priporočena PC
Note: Please, use heat meter (Wxx21xxx) with connection set (order no.: WFZ.MBUSSET)..
4.3.3 Pulse adapter AEW310.2
M-Bus pulse adapter
86,79
4.3.4 System components WFZ.MBUSSET OZW10 ARG10.DE FZ201-003 FZ201-002 FZ201-004 FZ201-800 WZC-P60 WZC-P250 WZC-R250 F12105-2015
M-Bus-Connection-set for heat meter Central M-Bus readout unit Ûser`s manual for central unit OZW 10 24V AC for central readout unit OZW 24VAC transformer switch Sub-distribution box for 24V AC transformer Serial cable not crossed M-Bus level converter M-Bus level converter M-Bus repeater M-Bus - Installation box
17,64
71,36 25,25 22,35 37,88
5,75
4.3.5 Tools, Software Programming tools for AEW21 AZW20 FZ201-500 ACT20
Programming adapter for AEW21 (PC) Channel converter for AEW21 und AEW22
Parametrisation software for measure devices
145,28 52,61 183,00