These landing gear have different leg travels and load capacities. ... All of these
Landing Gear have more part numbers than the ones listed here, changing the.
246 LANDING GEAR SELECTIONS LISTING Th e
Part No. 1013912
O rig Description in al Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 16.87" travel, universal mount. !
1013992 1013993 1013994 1013995 1013996
Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 17" travel, outside mount. Fleetcraft Square body with 10x10 cushion-foot shoe. 17" travel, outside mount. Fleetcraft Square body with 10x10 lo-pro cushion-foot shoe. 17" travel, inside mount. Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 17" travel, universal mount. Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 19" travel, outside mount.
Part No. LGS-3A001 LGS-4A001 LGS-5A001 LGS-3A105 LGS-4A105 LGS-5A105 LG5001-70 LG5001-90 LG4001-70 LG4001-90 LG400B-70 LG400B-90 785131S 1013932
Part No. A400-G-17 A400-G-19 A400-G3-17 A400-G3-19 A400-T-17 A400-T-19 A401-G-17 A401-G3-17 A401-T-14 A401-T-17 A401-T-19 A401-T1-17 A441-G3-17
Th e
JM od el !
Th e
M Description ar k Holland Square body with 12" cushion-foot shoe. 16.5" travel, universal mount. V! Holland Square body with 12" cushion-foot shoe. 17.6" travel, universal mount. Holland Square body with 12" cushion-foot shoe. 18.8" travel, universal mount. Holland Square body with 4.9" tall 12x11.5 sand shoe. 16.5" travel, universal mount. Holland Square body with 4.9" tall 12x11.5 sand shoe. 17.6" travel, universal mount. Holland Square body with 4.9" tall 12x11.5 sand shoe. 18.8" travel, universal mount. Th e Holland Square body with 4.5" tall 10x10 sand shoe. 17" travel, universal mount. 500 00 Holland Square body with 4.5" tall 10x10 sand shoe. 19" travel, universal mount. ! Th e5 Holland Square body with 4.5" tall 10x10 sand shoe. 17" travel, universal mount. 10 Holland Square body with 4.5" tall 10x10 sand shoe. 19" travel, universal mount. 00 ! Holland Square body with 10x10 cushion-foot shoe. 17" travel, universal mount. Th Holland Square body with 10x10 cushion-foot shoe. 19" travel, universal mount. e
Holland Square body with 10x10 cushion-foot shoe. 16.87" travel, universal mount. Holland Square body with 2.5" tall 10x10 sand shoe. 16.87" travel, universal mount.
CM S2 !
O w uts / c id us e Description h m Jost Square body with 10x10 cushion-foot shoe. 17" travel, outside mount. ion oun fo t Jost Square body with 10x10 cushion-foot shoe. 19" travel, outside mount. ot Jost Square body with 10x10 lo-pro cushion-foot shoe. 17" travel, outside mount. Jost Square body with 10x10 lo-pro cushion-foot shoe. 19" travel, outside mount. O u Jost Square body with 4.5" tall 10x10 sand shoe. 17" travel, outside mount. w/ s tsid Jost Square body with 4.5" tall 10x10 sand shoe. 19" travel, outside mount. and e m sh ou oe nt Jost Square body with 10x10 cushion-foot shoe. 17" travel, inside mount. Jost Square body with 10x10 lo-pro cushion-foot shoe. 17" travel, inside mount. In Jost Square body with 4.5" tall 10x10 sand shoe. 14" travel, inside mount. si de Jost Square body with 4.5" tall 10x10 sand shoe. 17" travel, inside mount. m ou Jost Square body with 4.5" tall 10x10 sand shoe. 19" travel, inside mount. nt Jost Square body with 2" tall 10x10 sand shoe. 17" travel, inside mount. Jost Square body with 10x10 lo-pro cushion-foot shoe. 17" travel, inside mount.(Magnum!)
These landing gear have different leg travels and load capacities. This is a listing to let you know what we have in choices of Landing Gear. All of these Landing Gear have more part numbers than the ones listed here, changing the footware, travel, or capacity. As your landing gear headquarters, we add new legs all the time!
247 FLEETCRAFT LANDING GEAR SPECIFICATIONS - "THE ORIGINAL" Specifications Gearing:
3.2 turns to the inch in high gear 19.2 turns to the inch in low gear.
Weight:
158 pounds (Cushion Foot model) 170 pounds (Sandshoe model)
Certification:
Fleetcraft models meet and/or exceed all TTMA/AAR specifications.
Features
1013912 Part No. 1013912
Mount:
Universal mount - fits inside or outside trailer frame.
Gearbox:
Permanently sealed with special formula EP grease for longer maintenance-free operation and Constant Mesh Gearing.
Legs:
Upper and lower legs formed from HSLA tubing.
Description Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 16.87" travel, universal mount.
Load Capacities Per Pair (In lbs.) Maximum Ultimate Legs Bend Screw Static Load Static Load or Break with Model Size Over 2 Legs* Over 2 Legs* Side Thrust* 1 Square 1 /2" 140,000 160,000 27,000 Lift Capacity 39,000 lbs at 100 ft. lbs. Input Torque
5-Year Warranty! For defects in material and workmanship.
Dimensions Set No. A B C D Square Legs With 4.5" Sand Shoes 1013912K 48.37" 31.50" 25.50" 16.87"
248 FLEETCRAFT SQUARE LEG LANDING GEAR
SQUARE LEG Part Number for set less hardware: 1013912
Gear Box Repair Kit Part No.RK-11291
249 FLEETCRAFT ROUND LEG LANDING GEAR 53 2
Get the commonly replaced components
7
Part No. RK-11291
14 26
29 41 30 21 14
52 31
36
34 38
13
Item No. 1 2 3
Part No. 724036 751601 725046
4 5 6 7 8 9
725002 730606 730011 722017 725000 750010
10 11 12 13 14 15
750002 725003 741158 1014438 6943-2 750009
21 22 23
48
2742 43 50 44
26 53 46
45
51 47
35 36
19
49
18 19
10
21
16 17 18
11 17
40
54
52 35
15
12
1
25
10
16 9
4
6 21
3
to stock boxed kit:
32
7 1
4 5
in this easy
33 37 39
4
8 24
53
of the gearbox
6
5
3
2
53
53
725000 729002 729108 T151T J4928-1 J5321 1402-A1 1151-B36 1011223
22 21
ROUND LEG 1013902 Legs no longer available. Parts available.
Description Bushing Cover Groove pin, 5/16 X 11/2 Roll pin, 3/8 X 13/8 Bevel gear, 30T Pinion bevel, 14T Bushing - screw Roll pin - 5/16 x 11/4 Gear set, sliding, 37/12T Shaft, pinion Roll pin, 3/8 X 11/2 Cover assembly Crank Shaft, crank Gear set, rigid, 26/51T Roll pin, 5/16 X 11/4 Spring clip Bearing ball Brg. for HD appl. Collar Collar for HD appl. Nut lock, 3/8-16 Bolt, 3/8-16 X 3/4 Axle - for sandshoes
No. 24 25 26 27 28 29 30
Item No. J1219 750004 1351-A3 1351-A7 1011225 729002 J-4702
31 32 33 34 35 36
1351-A1 1151-B99 9375 J-122-B 750212 1751-A1
37 38
9374-1 9374-2 1151-B81
39 40 41 42 43 44
1402-A9 729000 729001 1401-A4 1752-A4 1190656
45
1151-B17
Part Description Washer Shaft, pinion Grease fitting Grease fitting Sand shoe, replm't Seal Crank shaft bracket (F.W. under 54) Grease fitting Bolt, 1/4-20 X 21/4 Spacer Crank holder Crank shaft ext'n Washer, 3/8, plain, heavy Crank bracket ass'y Crank bracket ass'y Bolt, hex head, 3/8-16 X 23/4 Lock nut, 1/4-20 Spring - detent Ball - detent Hex nut, 5/8-11 Washer Brace tube, cross, replacement, adj. Bolt, hex head, 5/8-11 X 2
28
23
54
Item Part No. Description 1012589 Brace tube, adj XB-LG0085 Crank holder 1151-B4 Bolt, hex head, 3/8-16 X 21/2 9260-3 Intermediate shaft universal appl. J4154 Brace ear 1151-B1 Bolt, hex head, 3/8-16 X 13/4 J3292 Coupling 1655-A32 Screw, hex washer head, 1/4-20 X 1/2 6866 Crank holder
55
not available Upper leg, 2 spd,
No. 46 47 48 49 50 51 52 53
56 57 58
25-7/16" Lg. (-3) not available Upper leg, 1 spd, 25-7/16" Lg. (-3) not available Lower leg, (-3) not available Lower leg ass'y w/ cushion foot (-3)
250 FLEETCRAFT J-MODEL LANDING GEAR Load Capacities Per Pair (In lbs.)
Specifications Gearing:
3.5 turns to the inch in high gear 32 turns to the inch in low gear.
Weight:
177 pounds (Cushion Foot model) 188 pounds (Sandshoe model)
Certification:
Fleetcraft models meet and/or exceed all TTMA/AAR specifications.
Lifting Capacity - 50,000 lbs. -at 100 ft. lbs input torque Static Load Capacity - 160,000 lbs. Side Load Capacity - 29,000 lbs.
Features Mount:
All mounts available, universal, inside or outside trailer frame.
Gearbox:
No external gearbox! The gearing mechanism is an integral part of one sturdy leg column-streamlined and protected from road wear.
Legs:
Nonlinear analysis was employed to determine the optimum grade of high strength low alloy steel for the landing gear. Finite analysis yielded the ideal shape.
1013992
5-Year Warranty! When properly applied and installed, these legs are warrented to be free of defects in materials and workmanship under normal use and service for a period of five years. Part No. 1013992 1013993 1013994 1013995 1013996
Description Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 17" travel, outside mount. Fleetcraft Square body with 10x10 cushion-foot shoe. 17" travel, outside mount. Fleetcraft Square body with 10x10 lo-pro cushion-foot shoe. 17" travel, inside mount. Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 17" travel, universal mount. Fleetcraft Square body with 4.5" tall 10x10 sand shoe. 19" travel, outside mount.
Dimensions Set No. A B C Legs With 4.5" Sand Shoes 1013992 48.63" 31.63" 24.94"
D
1013993
17"
C B A
D
1013995
251 FLEETCRAFT J-MODEL LANDING GEAR PARTS DIAGRAM
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Part No. ---------------C10067.2 B10261 C10262 C10263 C10108 B10066 A10059.1 C10217 C10259 C10177 C10155 B10130 A10102 A10052.3 A10218 A10040 A10283 C10209 A10038.7 A10037.1 A10033
Qty. 1 1 2 2 2 1 1 2 2 2 1 4 1 1 1 2 1 2 2 2 4 1 4 4 2 2
Description Outer Housing, 2 Speed Outer Housing, 1 Speed Inner Leg Ass'y, Standard Inner Leg Ass'y, 10" Cushion Inner Leg Ass'y, 10" Cushion Standard Crankl w/Hardware Crank hanger Brace Lug, Flat Brace Lug - 90 Degree Brace Lug - W Intermediate Cross Shaft Cover Screw Cover - 2 Speed Cover - 1 Speed Pinion Gear Bevel Gear Pinion Shaft - 1 Speed Thrust Washer Grooved Pin Spacer Washer Grease Fitting Grease Seal Strut Brace (not shown) Self Locking Nut Cross Shaft Bolt - 3/8" x 2" Gr5 Thrust Bearing
Item 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 46 46 46 47 48 49
Part No. A10101 A10212 A10255 A10255 A10249 A10247 A10054.3 A10260.1 A10054.7 B10236 C10234 C10233 C10078 C10085 A10049 A10048 B10229 A10230 A10038.6 C10035 C10135 C10256 C10257 B10036 A10037.3 A10054.6
Qty. 2 1 3 2 1 1 1 2 1 1 1 1 1 1 1 2 1 4 4 2 2 2 2 2 2 2
Description Collar Output Shaft Bushing Bushing Detent Bushing Bushing Roll Pin - 3/8" x 11/2" Spiral Pin Roll Pin - 3/8" x 13/4" Output Cluster Shaft Output Cluster gear Input Gear Shaft Output Spur Gear Input Spur Gear Detent Spring Detent Ball Shift Housing Shift Housing Bolt Self Locking Nut Shoe - 10" x 10" x 41/2" Standard Shoe - 10" x 10" x 2" Shoe - 10" x 12" x 41/2" Shoe - 10" x 12" x 2" Shoe Axle Hex head Bolt Roll Pin - 1/4" x 11/4"
Part No. B10229S
Part No. B10285
Shift Housing Kit - Includes #'s A10283, A10249, A10247, A10048, A10049, B10229 Item #'s 22, 31, 32, 41, 42, 43
Shaft Housing Assembly - Includes #'s B10229S, C10233 (The Kit to the Left! and Item # 38.)
252 HOLLAND MARK V PART NUMBERS AND SPECIFICATIONS
Leg Set Complete LGS-1A105K LGS-3A001K LGS-3A105K LGS-4A001K LGS-4A105K LGS-5A001K LGS-5A105K LGH-3A312K LGH-4A312K
Leg Set Less Hardware LGS-1A105S LGS-3A001S LGS-3A105S LGS-4A001S LGS-4A105S LGS-5A001S LGS-5A105S LGH-3A312S LGH-4A312S
Holland Mark V Landing Gear All Sets Listed Are Universal Mount 2 Speed 1 Speed Leg Leg Leg Part No. Part No. Travel XA-S8-1A105 XA-S9-1A105 13.5" XA-S8-3A001 XA-S9-3A001 16.5" XA-S8-3A105 XA-S9-3A105 16.5" XA-S8-4A001 XA-S9-4A001 17.6" XA-S8-4A105 XA-S9-4A105 17.6" XA-S8-5A001 XA-S9-5A001 18.8" XA-S8-5A105 XA-S9-5A105 18.8" XA-H8-3A312 XA-H9-3A312 16.5" XA-H8-4A312 XA-H9-4A312 17.6"
Footware Standard Sandshoes 12" Self Leveling Foot Standard Sandshoes 12" Self Leveling Foot Standard Sandshoes 12" Self Leveling Foot Standard Sandshoes Solid Axle, Heavy Duty Sandshoes Solid Axle, Heavy Duty Sandshoes
Load Capacities Per Pair (In lbs.) Mark V Maximum Static Load Side Load Over 2 Legs* Capacity* 200,000 16,000 Lift Capacity: 62,500 lbs at 100 ft. lbs. of input torque Specifications Gearing:
Landing Gear Dimensions Travel Self Std. Code Travel Leveler Sandshoe A B A B 0 12.5 37.0 24.5 37.8 28.4 1 13.5 41.8 28.3 43.6 29.1 2 15.0 44.8 29.8 45.6 30.6 3 16.5 47.8 31.3 48.6 32.1 4 17.6 50.0 32.4 50.8 33.2 5 18.8 53.3 33.6 53.1 34.4
2.5 turns to the inch in high gear 33.8 turns to the inch in low gear.
Weight:
199 pounds (Less hardware)
Certification:
Meets and/or exceeds all TTMA/AAR specifications. 62,500 lbs at 100 ft. lbs. of input torque
Lift Capacity:
Features Mount:
Lubrication:
Legs:
Universal mount - fits inside or outside trailer frame. Mounting and turn ratios all match previous Mark V models. Deep grease reservoir in the riser nut insures constant lubrication of the elevating screw. Upper and lower legs formed from HSLA tubing.
LGS - 1 A 1 05 K
Model No. Description Model Travel LG Set LGS Code 1 Speed Leg XA-S9 See 2 Speed Leg XA-S8 Above
Mounting Code A: Univ. B: Inside C: Outside
Axle Type Code 0: No Axle 1: Std Axle 2: Heavy Pipe 3: Solid
01: 03: 05: 08:
Footware Code Kit Code 12" Dia. Self Leveler 10: No Footware K: L/G Kit 9" Dia. Wheels 13: 2.5" x 12" x 11.5" Complete 4.9" x 12" x 11.5" S/shoe Low Profile Sandshoe S: Legs Large 5" x 14" x 19" S/shoe 14 2.4" x 10" x 11.5" Cush. Ft. Only
253 SAF-HOLLAND MARK V LANDING GEAR PARTS - LISTING Recessed gearbox cover identifies these Holland legs.
DIAGRAM ON NEXT PAGE
254 SAF-HOLLAND MARK V LANDING GEAR PARTS - DIAGRAM
PARTS LISTING ON PREVIOUS PAGE
255 HOLLAND FORMULA 150 LANDING GEAR (OBSOLETE) Part No.LG2191-01 Kit, R.H. Shaft & Gear Qty. Part No. Desc 2 XB-KEY-018-02 Woodruff Key 1 LG2125 Tube Spacer 1 XA-02043-1 Cluster Gear 1 LG2126 Spacer 1 XB-PW-016-19 Flat Washer 1 XA-06217 Pinion Gear 2 XB-SP-014-27 Pin Spring 1 XA-06216-A-R Jack Shaft
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Part No. N/A N/A N/A LG0266 XB-STS-008-11 XA-06218 XB-LG0893 XB-SP-014-27 XB-KEY-018-02 XB-LG1823-01 N/A XB-PW-016-19 XA-LG0570 XB-GP-052-21 XB-PW-016-62 LG2126 XB-BRG-013-77 XB-LG0544 XB-SLN-012-04 XB-HHC-050-42 XB-PW-016-03 XA-01918 XB-3103 XB-CX-14-28-F-58 XA-06224-A
Qty. 2 1 1 2 5 2 2 4 3 2 1 2 2 2 2 1 2 2 5 3 2 1 5 5 1
This Landing Gear No Longer Made, NOT ALL Parts Are Available!
Description Inner leg and screw assembly Single speed outer leg 2-speed outer leg Brace ear Self-tapping screws Upper leg cover Leg cover gasket .25” x 1.50 spring pin Woodruff key Pinion gear Single speed drive shaft Washer Bevel gear .38” x 2” groove pin Washer Spacer Thrust bearing Collar .38”-16 locknut .38”-16 x 2.25 hex bolt .38” flat washer Crank handle assy. .25”-28 locknut .25”-28 x .62” hex bolts Gearbox cover
Item 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Part No. XB-01791 Call for options XA-0306-1 XB-03370-1 XB-21-S-187-1000 XA-01792 Call for options LG2131-02 XB-0307-PM XB-0308-PM LG0094-6825 LG2125 XB-GRF-022-16 LG0056 LG0055 LG0055-01 LG0070-02 XB-HHC-050-69 XB-LG0085 XA-01918-1 LG0086-01 XA-02195 XA-02198-2 XA-02198-1 XA-02197
Qty. 1 1 1 1 1 1 1 1 2 2 1 1 5 2 2 2 2 2 1 1 1 1 1 1 1
Description Gearbox cover gasket Crank shaft Drive cluster gear .88” bore Shifter spring Roll pin .19” x 1” Pin 2-speed drive shaft Driven cluster gear (1” bore) Bearing (1” diameter) Bearing (.88” diameter) Cross shaft Tube spacer Lube fitting Skid foot (2.00” high) Skid foot (4.5” high) standard Skid foot (4.5” high) hvy. duty Axle .38”-16 x .75” hex bolt Crank holder Extra long crank (optional) Crank hanger (optional) Extension bracket (optional) Short ext. shaft (optional) Long ext. shaft (optional) Coupling
256 SAF-HOLLAND MODEL 50,000 LANDING GEAR
Gear Box Repair Kit Part No. RK-11285
Specifications: Low Speed Gear Ratio - With Low Speed Gear Ratio of 34.4 turns/inch and high speed of 4.5 turns/inch provides 60,000 lbs. lift capacity at 100 ft./lbs. input torque and quick speed to the ground. Universal Mt. 'A' dimension with retracted shoe is 31.188" to shaft.
Features: Dependable Warranty - A comprehensive warranty5-year parts, 2-year labor. Massive 5" Upper Housing Structure Lower Leg - 12% larger than standard. Certification: Meets and/or exceeds all TTMA/AAR specifications.
Model 50,000 Load Capacities Per Pair (In lbs.) Ultimate Lateral & Static Load longitudinal Over 2 Legs* Strength 170,000 29,000 *With proper bracing.
Stnd. 17" travel Complete Set LG5001-70K Less Hardware LG5001-70S 2 Speed LG5001-72 1 Speed LG5001-71
257 SAF-HOLLAND MODEL 51,000 LANDING GEAR
Specifications: Rated at 140,000 lbs. static load and 13,500 lbs. per leg lateral and longitudinal strength for extended service life, less maintenance and reduced downtime. Universal Mount. Low Speed Gear Ratio - With Low Speed Gear Ratio of 34.4 turns/inch and high speed of 4.5 turns/inch provides 50,000 lbs. lift capacity at 100 ft./lbs. input torque and quick speed to the ground. Measurement with retracted shoe is 31.188 to shaft."
Stnd. 17" travel Complete Set LG4001-70K Less Hardware LG4001-70S
Features: Dependable Warranty - 5-year parts, 2-year labor. Exceeds AAR performance. Patented twin bulkhead floating nut reduces damage from dock-walk.
Replacement Square Cushion Foot Kit Part No. LG0048-01
2 Speed LG4001-72 1 Speed LG4001-71
Gear Box Repair Kit Part No.RK-11289 Model 51,000 Load Capacities Per Pair (In lbs.) Ultimate Lateral & Static Load longitudinal Over 2 Legs* Strength 140,000 27,000 *With proper bracing.
258 SAF-HOLLAND "FAST GEAR" MODEL FG4000 PARTS LIST FG4000 Series Holland's fastest speed, lightest weight, versatile landing gear designed for on highway vans reefers and other standard duty applications where frequent trailer coupling and uncoupling occur. Especially where speed to the ground is important: Grocery fleet, pick up and delivery, etc.
259 AUSTIN-WESTRAN LIFT-PAK ROUND (LPR) LANDING GEAR CONSTANT MESH GEARING KIT
This Landing
Kit Part No. 716037 - Kit Includes: 1 Low Speed Drive gear 1 High Speed Drive Gear 1 Crankshaft 1 5/16" x 11/2" Groove Pin 1 3/8" x 13/8" Roll Pin 1 Spacer Tube 1 Instruction Sheet
53
8 24
53 4 6 3
10
4
52 35
11
40 14 26
54
29 41 14 30 21
Listing
25
Only. Limited Supply.
56 48
17
42 43
55
50 18
44
46 26
Parts
7 1
27 27
15 12
Longer Made.
21
16 9 32
4
3
2
49
37 33 39
6
5 53
Gear No
53
2
58
19
45
53
10 52
51
31 21
57 47
35
36
21 22
34
28
36 38 23
13
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Part No. 724003 750109 1402-A7 725002 750355 730011 724000 725000 750010 750002 725003 9366-3 J-27-BX-3 6943-2 6943-3 750009 725000 729002 T127T 1102-A9 J4928-1 J5321 J3237 1402-A1 1151-B36 9298-1 J1219 750004 1351-A3 1351-A7 J4514-3
Qty. 3 2 2 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 7 2 2 1 1 1 4 2
Description Bushing Cover Locknut, 1"-14 Thin Roll Pin 3/8" x 13/8" Bevel Gear 28T Pinion, bevel, 14T Bushing - Screw Roll Pin, 5/16" x 11/4" Gear Set, Sliding, 37/12T Shaft, Pinion Roll Pin, 3/8" x 11/2" Cover Assembly Crank Shaft, Crank Shaft plated for permanent Lube Gear Set, Rigid, 26/51T Roll Pin, 5/16" x 11/4" Spring Clip Bearing, T127 Bearing T151 For HD Applications Collar Collar for HD Applications Key, 1/4" x 13/16" Lock Nut, 3/8"-16 Bolt, 3/8"-16 x 3/4" Axle For Sand Shoes Washer Shaft, Pinion Grease Fitting Grease Fitting Sand Shoe
Item 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 59 60 61
Part No. 728000 J4702 1351-A1 1151-B99 9375 J-122-B 750212 1751-A1 9374-1 9374-2 1151-B81 1402-A9 729000 729001 1401-A4 1752-A4 1012589 1151-B17 1012589 J-7153 1151-B4 9260-3 1011235 J4154 J4890 1151-B1 J3292 1655-A32 6866 N/A N/A N/A
Qty. 1 1 1 3 3 1 1 2 1 1 1 3 1 2 8 8 2 8 2 1 2 1 1 2 2 2 1 6 1 1 1 2
Description Seal Crankshaft Brkt Ass'y Grease Fitting Bolt, 1/4"-20 x 21/4" Spacer Crank Holder Shaft, Crank Extension Washer, 3/8" Plain, Heavy Crank Bracket Assembly Crank Bracket Assembly Bolt, Hex Head, 3/8"-16 x 23/4" Lock Nut, 1/4"-20 Spring - Detent Ball - Detent Hex Nut, 5/8"-11 Washer 2 Piece Brace, Adjustable Bolt, Hex Head, 5/8"-11 x 2" 2 Piece Brace, Adjustable Crank Holder Bolt, Hex Head, 3/8"-16 x 21/2" Intermediate Shaft, 3 Piece Adjustable Intermediate Shaft, 1 piece, 68" Long Brace ear, For Round Leg Brace Ear, For Square Leg (not shown) Bolt, Hex Head, 3/8"-16 x 13/4" Coupling Screw, Hex Washer Head, 1/4"-20 x 1/2" Crank Holder Upper Leg, 2 Speed, Round Lower Leg, Round Upper Leg, 1 Speed, Round
260 AUSTIN-WESTRAN LIFT-PAK SQUARE (LPS) LANDING GEAR CONSTANT MESH GEARING KIT
2
Kit Part No. 716037 - Kit Includes: 1 Low Speed Drive gear 1 High Speed Drive Gear 1 Crankshaft 1 5/16" x 11/2" Groove Pin 1 3/8" x 13/8" Roll Pin 1 Spacer Tube 1 Instruction Sheet
3 5 2
20 5 7 16
12
32 4
52
54
Longer Made. Parts
1
Only. 49
35
Limited Supply.
27
15 11
59
42 43 50 46
26
61 48
27 17
29 41 14 30 21
Listing
25
6 21
9
40 14 26
5 7
Gear No
4
10
37 33 39
6 4
20 8 24
This Landing
44 45
53
10 52
51
31 21
60 47
35
36
21 22
34
28
36 38 13
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Part No. 724003 750109 1402-A7 725002 750355 730011 724000 725000 750010 750002 725003 9366-3 J-27-BX-3 6943-2 6943-3 750009 725000 729002 T127-T 1102-A9 J4928-1 J5321 J3237 1402-A1 1151-B36 9298-1 J1219 750004 1351-A3 1351-A7 J4514-3
Qty. 3 2 2 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 7 2 2 1 1 1 4 2
Description Bushing Cover Locknut, 1"-14 Thin Roll Pin 3/8" x 13/8" Bevel Gear 28T Pinion, bevel, 14T Bushing - Screw Roll Pin, 5/16" x 11/4" Gear Set, Sliding, 37/12T Shaft, Pinion Roll Pin, 3/8" x 11/2" Cover Assembly Crank Shaft, Crank Shaft plated for permanent Lube Gear Set, Rigid, 26/51T Roll Pin, 5/16" x 11/4" Spring Clip Bearing, T127 Bearing T151 For HD Applications Collar Collar for HD Applications Key, 1/4" x 13/16" Lock Nut, 3/8"-16 Bolt, 3/8"-16 x 3/4" Axle For Sand Shoes Washer Shaft, Pinion Grease Fitting Grease Fitting Sand Shoe
23
Item 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 59 60 61
Part No. 728000 J4702 1351-A1 1151-B99 9375 J-122-B 750212 1751-A1 9374-1 9374-2 1151-B81 1402-A9 729000 729001 1401-A4 1752-A4 1012589 1151-B17 1012589 J-7153 1151-B4 9260-3 1011235 J4154 J4890 1151-B1 J3292 1655-A32 6866 N/A N/A N/A
Qty. 1 1 1 3 3 1 1 2 1 1 1 3 1 2 8 8 2 8 2 1 2 1 1 2 2 2 1 6 1 1 1 2
Description Seal Crankshaft Brkt Ass'y Grease Fitting Bolt, 1/4"-20 x 21/4" Spacer Crank Holder Shaft, Crank Extension Washer, 3/8" Plain, Heavy Crank Bracket Assembly Crank Bracket Assembly Bolt, Hex Head, 3/8"-16 x 23/4" Lock Nut, 1/4"-20 Spring - Detent Ball - Detent Hex Nut, 5/8"-11 Washer 2 Piece Brace, Adjustable Bolt, Hex Head, 5/8"-11 x 2" 2 Piece Brace, Adjustable Crank Holder Bolt, Hex Head, 3/8"-16 x 21/2" Intermediate Shaft, 3 Piece Adjustable Intermediate Shaft, 1 piece, 68" Long Brace ear, For Round Leg Brace Ear, For Square Leg (not shown) Bolt, Hex Head, 3/8"-16 x 13/4" Coupling Screw, Hex Washer Head, 1/4"-20 x 1/2" Crank Holder Upper Leg, 2 Speed, Square Lower Leg, Square Upper Leg, 1 Speed Square
261 JOST PART NUMBERS AND SPECIFICATIONS Model A400 Square Leg Outside Mount 2 Speed 1 Speed Leg Set Leg Leg Leg Complete Part No. Part No. Travel Footware A400-G-17K A400-G-17RH A400-G-17LH 17" 10" x 10" Cushion Foot A400-T-17K A400-T-17RH A400-T-17LH 17" 10" x 10" x 41/2" Sand Shoes A400-T-19K A400-T-19RH A400-T-19LH 19" 10" x 10" x 41/2" Sand Shoes Model A401 Square Leg Inside Mount A401-G3-17K A401-G3-17S A401-G3-17RH A401-G3-17LH 17" Low Profile Cushion Foot A401-T-14K A401-T-14S A401-T-14RH A401-T-14LH 14" 10" x 10" x 41/2" Sand Shoes A401-T-17K A401-T-17S A401-T-17RH A401-T-17LH 17" 10" x 10" x 41/2" Sand Shoes A401-T1-17K A401-T1-17S A401-T1-17RH A401-T1-17LH 17" 10" x 10" x 2" Sand Shoes Jost landing gear meet all AAR and TTMA specifications *Note 1: The gearside leg is taller than the non-gearside leg by 2.79" in overall length of the entire housing. **Note 2 - The inside mount legs come with a shorter cross-shaft. Leg Set Less Hardware A400-G-17S A400-T-17S A400-T-19S
*
Load Capacities Per Pair: -at 100 ft. lbs input torque Lifting Capacity: 50,000 lbs. Static Load Capacity: 160,000 lbs. Side Load Capacity: 29,000 lbs. Travel Option Dimensions: D A B C Travel Extended Retracted Upper Hsg. 14" 425/8" 285/8" 215/16" 5 5 17" 48 /8" 31 /8" 245/16" 5 5 19" 52 /8" 33 /8" 265/16"
Specifications: Gearing: 3.5 turns to the inch in high gear 32 turns to the inch in low gear. Weight: 177 pounds (Cushion Foot model) 188 pounds (Sandshoe model) Certification: Fleetcraft models meet and/or exceed all TTMA/AAR specifications. Features: Mount: All mounts available, universal, inside or outside trailer frame. Gearbox: No external gearbox! The gearing mechanism is an integral part of one sturdy leg column-streamlined and protected from road wear. Legs: Nonlinear analysis was employed to determine the optimum grade of high strength low alloy steel for the landing gear. Finite analysis yielded the ideal shape.
5-Year Warranty! When properly applied and installed, these legs are warrented to be free of defects in materials and workmanship under normal use and service for a period of five years.
262 JOST LANDING GEAR
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Part No. See Table See Table See Table See Table See Table C10067.2 B10261 C10262 C10263 C10108 B10066 A10059.1 C10217 C10259 C10177 C10155 B10130 A10102 A10052.3 A10218 A10040 A10283 C10209 A10038.7 A10037.1 A10033
Qty. 1 1 2 2 2 1 1 2 2 2 1 4 1 1 1 2 1 2 2 2 4 1 4 4 2 2
Description Outer Housing, 2 Speed Outer Housing, 1 Speed Inner Leg Ass'y, Standard Inner Leg Ass'y, 10" Cushion Inner Leg Ass'y, 12 " Cushion Standard Craml w/Hardware Crank hanger Brace Lug, Flat Brace Lug - 90 Degree Brace Lug - W Intermediate Cross Shaft Cover Screw Cover - 2 Speed Cover - 1 Speed Pinion Gear Bevel Gear Pinion Shaft - 1 Speed Thrust Washer Grooved Pin Spacer Washer Grease Fitting Grease Seal Strut Brace (not shown) Self Locking Nut Cross Shaft Bolt - 3/8" x 2" Gr5 Thrust Bearing
Item 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 46 46 46 47 48 49
COMPONENT ASSEMBLIES TABLE Part No. Item 14" Travel 17" travel 19" travel Description 1 D10201.1 D10201.2 D10201.3 Outer Housing, 2 Speed 2 D10116.1 D10116.2 D10116.3 Outer Housing, 1 Speed 3 C10140.1 C10140.2 C10140.3 Inner Leg Ass'y, Standard 4 C10146.1 C10146.2 C10146.3 Inner Leg Ass'y - 10" Cushion 5 C10254.1 C10254.2 C10254.3 Inner Leg Ass'y - 12" Cushion
Part No. A10101 A10212 A10255 A10255 A10249 A10247 A10054.3 A10260.1 A10054.7 B10236 C10234 C10233 C10078 C10085 A10049 A10048 B10229S A10230 A10038.6 C10035 C10135 C10256 C10257 B10036 A10037.3 A10054.6
Qty. 2 1 3 2 1 1 1 2 1 1 1 1 1 1 1 2 1 4 4 2 2 2 2 2 2 2
Description Collar Output Shaft Bushing Bushing Detent Bushing Bushing Roll Pin - 3/8" x 11/2" Spiral Pin Roll Pin - 3/8" x 13/4" Output Cluster Shaft Output Cluster gear Input Gear Shaft Output Spur Gear Input Spur Gear Detent Spring Detent Ball Shift Housing Shift Housing Bolt Self Locking Nut Shoe - 10" x 10" x 41/2" Standard Shoe - 10" x 10" x 2" Shoe - 10" x 12" x 41/2" Shoe - 10" x 12" x 2" Shoe Axle Hex head Bolt Roll Pin - 1/4" x 11/4"
SHOE REPAIR KIT FOR 10" SQ. CUSH FOOT
Part No. C10717K Consists of: B10148 rubber cushion, B10149 retainer plate, C10145.1 housing (2), C10150 base (10")
263 FABRICATED LANDING GEAR PARTS SANDSHOES: STANDARD AND SPECIAL USE
SANDSHOES: STANDARD AND SPECIAL USE
SAND SHOE AXLES All axles include collar assemby, except solid axles which have cotter pin and washer.
Part No. Pad Size 1011225 10" X 10" 1011226 10" X 12" 1011227 12" X 12" 1011228 12" X 12" 1011229 12" X 12" 1011230 10" X 12" 1011231 10" X 12" 1011303 4.5" X 7" 1011310 10" X 10" 1011338 10" X 10" 1011339 12" X 12" J4836-3 10" X 10" Part No. 1011218 1011219 1011220 1011221 1011223 1011223-HD 1011232 1011217
Ground to Axle Center 4-1/2" 4-1/2" 2-1/2" 4-1/2" 4-1/2" 4-1/2" 2-1/2" 3-5/8" 1-3/4" 4-3/8" 4-3/8" 2-1/2"
Description Dolly Wheel Axle Sand Shoe Axle Sand Shoe Axle Sand Shoe Axle Sand Shoe Axle Sand Shoe Axle Sand Shoe Axle Collar Assembly
Gussets Notes Single Standard Duty Single Standard Duty Single LoPro, Std Duty Single Standard Duty Double Heavy Duty Double Heavy Duty None Low Profile None Wheel Foot LoPro. 7ga. w/patch None Double Heavy Duty Double Heavy Duty None LoPro, Std Duty
Length 15-3/8" 14-7/8" 16-1/2" 8-1/2" 8-1/2" 8-1/2" 8-3/8" 1/2"
Comment For wheel app. Solid Axle Solid Axle schedule 40 schedule 80 schedule 160 Solid Axle collar parts only! 4.50"
Part No. 1190043
Cushion Foot Kit (CMS) Original equipment on many types of legs. 10" x 10" ground contact. Complete with rubber cushion, nuts and bolts. Part No. 716059
5.00"
Description Axle Housing 5.875"
WHEEL ASSEMBLY with center plate. 3.625" Wide, 9" Diameter Part No. 1011224 use w/ 1011218 listed above.
Cushion Foot Kit Original equipment on 51000 legs. 10" x 10" square removable cushion foot Part No. LG0048-01
SHOE REPAIR KIT FOR JOST / J-MODEL 10" SQ. CUSH FOOT
Part No. C10717K Consists of: B10148 rubber cushion, B10149 retainer plate, C10145.1 housing (2), and C10150 base (10")
264 FABRICATED LANDING GEAR PARTS 3-Piece Cross Shaft Part No. Description 9260-3 "A"= 53" to 72" 3 Pc. Inner Tube Dia. 1.25" O.D. Outer Tube Dia.1.50" O.D. 1 Piece Cross Shafts Part No. Description 1011235 "A"=69" Fixed Length LG0094 "A"=68" Fixed Length LG0094-8050 "A"=80.5" Fixed Length
Standard Duty 2 Piece Adjustable Braces Part No. 1012589 1012590 1012594 1012596 1190656 Inner Tube Outer Tube
Brace Lugs Item Part No. Application
"A" Dimension 26" to 41" 42" to 57" 25" to 34" 20" to 24" 58" to 72" 1.50" O.D., 1.75" Sched 40 Pipe
1 2 3 4 5 6 7 8 9 10 11 12
"A"
J4890 1190554 J4154 1011242 XA-V-1938 1011244 C10108 1011243 1011245 1011247 1011248 1011249
For Square Leg For Square Leg For Round Leg For Round Leg Holland Mark V Universal Jost 90° Straight flat lug Straight flat lug Great Dane plate Great Dane flat lug Great Dane plate
"A" .375"
1014439 Crank, Vertical Fold 11.5" 1014445 Crank, Vertical Fold 15" 1014440 Crank, Vertical Fold 1014442 Crank, Horiz. Fold
21" 7.5"
1014444 Crank, Horiz. Fold 1014446 Crank, Horiz. Fold
12" 15"
1
Heavy Duty 2 Piece Adjustable Braces
Part No. Description A Dim. 1014438 Crank, Vertical Fold 7.5"
Part No. 1012591 1012592 1011233 Inner Tube Outer Tube
1.625"
"A" Dimension 26" to 41" 35" to 54" 56" to 72" 2.0" O.D., 2.0" Sched 40 Pipe
.375"
2 2.00" .375" 3
"A" 5-1/4"
10
"A"
3-7/8"
1.40"
4-1/2" 1"
13" (+-.25")
Vertical Fold
8-3/4" 13"
9.87"
4
2-1/8"
.375"
11
7.50"
3" 1-1/2"
"A"
.375" 1-1/2" 8"
13"
Horizontal Fold
5
8"
1.500"
12 1-1/2"
.375" 1-1/2" 9-1/2"
LANDING GEAR HARDWARE KITS: Part No. SQHDWKIT
Kit Contents 1011235 cross shaft, 1014438 (7.5")crank handle and J4890 brace ears for square legs.
SQHDWKIT15
1011235 cross shaft, 1014445 (15")crank handle and J4890 brace ears for square legs.
6 1.875"
7
8
SQHDWKIT21
1011235 cross shaft, 1014440 (21")crank handle and J4890 brace ears for square legs.
2"
top 9 bottom
7/8"
6-21/32" 7-1/2" 8-13/32" 9-1/4"
7/8"
265 HOPPER GEAR BOXES AND BOLT KIT
Grain Hopper Gearbox TIMPTE STYLE Kwik Shift Constant Mesh Gear Box (shaft length is 20.13" from base.) Part No. 742089
Grain Hopper Gearbox TIMPTE STYLE Kwik Shift Constant Mesh Gear Box (shaft length is 22.63" from base.) Part No. 742119
Grain Hopper Gearbox CORNHUSKER SHORT SHAFT Kwik Shift Constant Mesh Gear Box (shaft length is 3" from base.) Part No. 741805
Landing gear Bolt Kit Enough Bolts For One Leg Installation Part No. Description 1157014 Ten (10) 5/8"-18 x 11/2" grade 5 hex bolts and nylon insert lock nuts
266 FABRICATED LANDING GEAR PARTS 50.50" 62.50" 11.50"
25.50" Roadside
Curbside
Landing gear Bracket Replacement For Trailmobile
Landing gear Bracket Replacement For Trailmobile
Part No. Description 1190544-RS Roadside (Shown) 1190544-CS Curbside
Part No. 1190545
Description Universal
50.50" 48.0"
26.00"
13.0"
Landing gear Bracket Replacement For Pines
Landing gear Bracket Replacement For Great Dane Part No. 1190541 1190540
Part No. 1011238 1011239
Description Roadside - LH (Shown) Curbside - RH
Description Roadside Pines PILGB1315R) (Shown) Curbside Pines PILGB1315L
K-BRACE ASSEMBLIES Univeral K-Brace For 102" Trailer Part No. 1190660 Wabash Style Primered BlackWith Holes
K-Brace For 102" Trailer Part No. 4-A8-9-1 Trailmobile Style
70.313" 27.50"
19-3/32"
27.50"
20.00"
69-5/8"
267 LIGHT DUTY COMMERCIAL JACKS AND LANDING GEAR Converter Dolly Jacks Part No.:
JS-300-J
Static Load Capacity: Retracted Length: Extended Length: Wheel Size: Weight
1,200 lbs. 29.4" 44.4" 5"x2" Steel Approx. 36 lbs.
Part No.:
JS-300-JR
Static Load Capacity: Retracted Length: Extended Length: Wheel Size:
500 lbs. 29.4" 44.4" 5"x2" Plastic
Weight
Approx 34 lbs.
Part No.: XA-V-350 Wheel Assembly Only Part No. JS-300-B (No Footware) 23.7" - 38.7"
Single Drop Leg Part No.:
JS150-SB
Static Load Capacity 25,000 lbs. Retracted Length: 29.75" Extended Length: 54.75" Weight Approx 50 lbs. Holes placed 2 inches apart on lower leg allow the pin to be inserted for supporting 25,000 pounds.
Anti-Nosedive Jack
Full Crank Jacks Part No.:
LG9700-71000000
Static Load Capacity: Lift Capacity: Retracted Length: Extended Length: Crank Travel: Foot Pad:
Part No.:
15,000 lbs. 10,000 lbs. 25.125" 42.125" 17" 8" x 10"
LG8700-310000018
Static Load Capacity: 12,000 lbs. Lift Capacity: 10,000 lbs. Retracted Length: 24.38" Extended Length: 49.88" Crank Travel: 13.5" travel / 12" drop Drop Increments: 4"
Part No.: LG8700-313072000 same as above, and spring loaded! Part No.:
LGD700-212072000
Static Load Capacity: 20,000 lbs. Lift Capacity:@50 ft./lbs. torq. input 6,000 lbs. Lift Capacity:@100 ft./lbs. torq. input12,500 lbs. Retracted Length: 243/8" Extended Length: 503/8" Crank Travel: 12" Drop Leg Travel:(Holes on 2" centers) 14" Foot Pad: 9" x 9"
Part No.:
LG4700-324000000
Static Load Capacity: 25,000 lbs. Lift Capacity: 25,000 lbs. Retracted Length: 26.75" Extended Length: 51.25" Crank Travel: 13.5" travel / 12" drop Drop Increments: 4"
Part No. LG1870 (Fully Assembled!)
Non-lifting support jack prevents upending of trailers when not connected to a truck during loading and unloading. Unique hole pattern in the outer housing and retract tube provides maximum adjustment. 10,000 lbs. vertical load rating.
PINS FOR ANTI-NOSEDIVE JACKS Tempered spring steel lock. Part No. Dia. Length 1012039-1/21/2" 4" 1012039-5/85/8" 4" 1012039-3/43/4" 4"
Load Stabilizer Jacks Part No.:
1010181
Static Load Capacity 40,000 lbs. Retracted Length: 44" Extended Length: 51" Weight Approx 35 lbs. 14" Diameter Base, 3" Diameter Pipe. Meets OSHA requirements for stabilizing trailers while loading and unloading.
Part No.:
JS-2000
Static Load Capacity Lift Capacity w/ 100ft lbs Crank Turns per inch Top Pad Size Base Pad Size Wheel Size
62,500 lbs. 8,000 lbs. 2.5 6" X 20" 12 X 18" 9" diameter
Meets OSHA requirement 1910.178 k 3.