M-SerieS ContraCtor guide. Version ... Reduced installation time over
conventional systems ... Mitsubishi Electric offers a comprehensive family of
controllers that can adjust .... Slim, wall-mounted indoor units provide zone
comfort control.
Version
I MSCG_5.12 I ©2012 Mitsubishi Electric & Electronics USA, Inc.
SERIES
M-Series Contractor guide
Table of Contents Product Overview
4
Product Features 6 Inverter Technology
6
Temperature Control
7
Programmable Comfort
8
Healthier and Cleaner Air
10
H2i® Technology
11
SINGLE-ZONE products
12
Multi-ZONE products
14
M-Series Accessories
18
M-Series PRODUCT Specifications
21
ADVANCED TECHNOLOGY CREATES A COMFORT REVOLUTION For more than three decades, we’ve been improving comfort in homes all over the world. Now with the newest innovations, any space can be transformed with quiet, easy-to-use and energy-efficient cooling and heating systems that deliver ultimate comfort.
Mitsubishi Electric systems feature: •
Inverter-driven compressors
•
Split-zoning for precise temperature control and greater efficiency
•
Sleek indoor units that blend into any room
SERIES
The most advanced technology on the market:
Product overview
Perfect for Hot and Cold SpotS and beyond Key benefits of M-Series systems: Industry leading quality and reliability Minimal or no ductwork means less energy is wasted Reduced installation time over conventional systems Controllers allow for perfect temperatures in virtually any space – sunrooms, bedrooms, home offices, attics, basements and garage workshops
Inverter-driven compressors automatically adjust cooling and heating capacity for consistent temperature
H2 i® Hyper-heat pumps with hot-start technology provide instant warmth even in extreme climates (down to -130 F)
Advanced filtration dramatically improves air quality Maximum energy efficiency with higher SEER and HSPF ratings
4 / MITSUBISHI ELECTRIC / m-series / WHY M-SERIES
ENERGY EFFICIENT AND ENVIRONMENTALLY FRIENDLY M-Series systems utilize green technologies, and are much more efficient, so homeowners never have to sacrifice comfort over worries about high-energy costs. INVERTER technology results in substantial energy and utility savings for homeowners Zone control for improved comfort and decreased energy usage Many Energy Star® rated systems SEER ratings as high as 26 – dramatically better than conventional systems Local and state utility rebates and incentive opportunities Environmentally friendly R410A refrigerant with zero Ozone Depletion Potential (ODP) 83% of system components are recyclable Washable filters made from natural materials
Use your smart phone to scan the tag to the right, or visit dsireusa.org for information on available local rebate opportunities from state or utility companies.
MITSUBISHI ELECTRIC / m-series / Energy/environment / 5
Product Features
PUT COMFORT ON CRUISE CONTROL Sophisticated, electronic control systems detect any change in room or zone temperature and—like a car’s cruise control—automatically adjust the speed of the outdoor unit's INVERTER-driven compressor for precise capacity and temperature control. Electronic LEVs exactly control refrigerant flow to regulate coil temperature.
INVERTER TECHNOLOGY
Inverter System
Set Temperature
Automatically adjusts instantly for consistent comfort
72°
Conventional System
Constantly fluctuates, wasting energy and causing drafts
Time
6 / MITSUBISHI ELECTRIC / m-series / inverter
i-see Sensor™
Detects temperature variations and controls the airflow for ultimate comfort
™
DETECT AND CONTROL TEMPERATURE FLUCTUATIONS All M-Series systems detect room temperature fluctuations and automatically adjust performance for ultimate comfort in any room. All indoor models feature a return air sensor that constantly monitors and maintains room temperature Continuous fan operation ensures temperature consistency Systems with an i-see SensorTM scan the room and adjust airflow based on ambient temperature readings (MSZ-FE09/12NA i-see Sensor models only)
Auto changeover feature automatically switches between cooling and heating modes as needed to maintain a consistent temperature – just set it and forget it (MUZ and SUZ outdoor units)
Seven horizontal airflow directions provide 150° of lateral airflow for greater conditioned air circulation (wide vane or swing mode, available on the MSY(Z)-FE09/12/18/GE24/D30/36NA)
MITSUBISHI ELECTRIC / m-series / TEMPERATURE CONTROL / 7
PROGRAMMABLE COMFORT Mitsubishi Electric offers a comprehensive family of controllers that can adjust temperature, fan speed, and more.
Operation Select (Heat, Cool, Auto, Dry)
Fan Speed Timer
Econo Cool
Vane Control
HR/MIN (Time Set)
Smart Set Button
Clock Set
Reset
Sliding Cover
Controller features include: MODE: HEAT, COOL, AUTO, and DRY FAN: Adjusts fan speed STOP/START: A 12-hour ON/OFF timer ECONO COOL: Energy efficient cooling option VANE: Sets horizontal vane position TIME: Power off timer and clock adjustment
Standard for M-Series wall-mounted and floor-mounted systems.
SMART SET: Programs multiple settings into one
Optional wall-mounted wired controller is available (PAR-21MA, requires MAC-333 adapter).
quick-press feature. Programs heating set back Additional features available on some models
8 / MITSUBISHI ELECTRIC / m-series / Programmable
MHK1 Wireless Remote Controller Kit Includes Wireless Wall-mounted Remote Controller, Wireless Receiver, and Cable. Portable Central Controller and Outside Air Sensor are optional accessories.
WIRELESS Wall-Mounted
MIFH1 Wireless Receiver
REMOTE CONTROLLER
• Required for MRCH1 Wireless Remote Controller
• Backlit, easy–to–read display
• Enabled with RedLINK reliability
• Dual set-point control with system changeover • Enabled with RedLINK™ reliability • Installs anywhere with simple wall-mounted design • Compatible with MCCH1 Portable Central Controller and MOS1 Outside Air Sensor • Requires wireless interface (included in kit)
Portable Central
Outside Air Sensor
Controller
• Monitors outside air temperature and humidity
• Control up to 16 RedLINK™ devices
• Displays on MHK1 Remote Controller and MCCH1 Portable Central Controller
• Requires MHK1 per indoor unit • Monitor and control On/Off, Mode and Set Temperature • Schedule override capability MCCH1
MOS1
• Does not interfere with other wireless devices • Displays outside air temperature and humidity when used with MOS1 Outside Air Sensor
MITSUBISHI ELECTRIC / m-series / programmable / 9
MULTIPLE FILTERS FOR CLEANER, HEALTHIER AIR Our indoor units use a sophisticated multi-part filtration system to reduce contaminants such as allergens, viruses and bacteria from the air. This combination of filters provides a healthier, breathing environment for the home.
1
HYBRID CATECHIN PRE-FILTER: • Captures dust particles and absorbs odor-causing gases • Hybrid-coating process makes the catechin filter washable and, if properly maintained with regular cleaning, remains effective for up to ten years
2
PLATINUM CATALYST DEODORIZING FILTER: Available on MSZ-FE9/12NA • Features a ceramic surface absorption element and uses nanotechnology for high-power odor absorption
1
• Periodic cleaning, following the recommended procedures, will maintain filter effectiveness for up to two years 2 3 3
BLUE-ENZYME ANTI-ALLERGEN FILTER: Available on MSZ-FE9/12NA • Reduces germs, bacteria, and viruses • Helps trap dust, pollens, mites, and other particles • Utilizes an enzyme catalyst to help break down the sulfur atom bonds in allergen proteins, transforming them into nonallergen proteins, and, effectively cleaning the air (filter should be cleaned regularly to maintain effectiveness)
10 / MITSUBISHI ELECTRIC / m-series / Filters
HEAT AND LOTS OF IT Complementing the innovative INVERTER-driven compressor, the MSZ-FE high-efficiency systems feature special technology for delivering exceptional heating performance.
OPTION 1 h2i® Technology MUZ–FE H2i HEATING CAPACITY AT LOW TEMPERATURES* % Heating Capacity
120
100%
100
73%
80 60
MUZ-FE09NA MUZ-FE12NA MUZ-FE18NA Standard Heat Pump
40 20 0
-13
-4
0
5
10
17
25
30
35
Outdoor Temperature Degrees FWB
40
47
Includes correction for defrost. *NOTE: Low ambient temperature conditions may
require base pan heater (MSZ-GE and MSZ-FE 1:1 systems)
Heating even when it's -13° F outdoor ambient, producing OPTION 2
up to 100% heating capacity at 5° F (MSZ-FE09/18) and 92% capacity at 5° F for MSZ-FE12
MUZ–FE H2i HEATING CAPACITY Year-round in extreme climates AT LOWcomfort TEMPERATURES*
% Heating Capacity
without 120
the need for energy-consuming indoor supplemental 100% heating devices
100
73%
Hot-start technology provides warmth
80
60 from
the start, reducing drafts
40
Minimal maintenance thanks
20
MUZ-FE09NA MUZ-FE12NA MUZ-FE18NA toUNITARY easily accessible
filters, little or no ductwork to clean, and simple wiring between 0 the indoor and outdoor units -13 -4 0 5 10 17 25 30 35 40 47
QUIETER THAN A HUMAN WHISPER. Do you hear that? No? Mitsubishi Electric systems operate at low sound levels. Our indoor units produce decibels barely at a whisper level. Compare to other common sounds: Ambulance siren Circular saw Vacuum cleaner Normal conversation Whisper Our indoor units
120 decibels 110 decibels 80 decibels 60 decibels 30 decibels 19-34 decibels*
Did you hear that? We hope you did. Source: National Institute for Occupational Safety and Health *Smallest to largest capacity indoor unit at low speed
Outdoor Temperature Degrees FWB
* Includes correction for defrost.
OPTION 3 MITSUBISHI ELECTRIC / m-series / H2i/QUIET / 11
SINGLE-ZONE products
M-SERIES SINGLE-ZONE PRODUCTS AND FEATURES
Total control for total comfort: single rooms can now have ultimate comfort with the power of precise control over hot and cold spots.
SINGLE-ZONE, WALL-MOUNTED HEAT PUMPS
Cooling and Heating
Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.The indoor unit is powered by the outdoor unit, and should a power outage occur, the system is automatically restored when power returns.
MSZ/MUZ-GE/D Heat Pumps | 2,800–33,200 Btu/h Capacity Range • 14.5–21 SEER, 8.2–10 HSPF, INVERTER-driven compressor • Provides cooling and heating in a wide range of capacities • Offers a wide vane for a wider angle of airflow, 150° from left to right (on FE12/GE24/D30/D36 models) • Ideal for applications in bedrooms, home offices, living rooms, dining rooms basements, kitchens, guard houses and more
MSZ/MUZ-FE High Efficiency Heat Pumps | 3,100–25,200 Btu/h Capacity Range • 20.2–26 SEER, 10–10.5 HSPF, INVERTER-driven compressor • Quiet Operation as low as 22 dB(A) • Provides cooling and heating in a wide range of capacities • Offers a wide vane for a wider angle of airflow, 150° from left to right • Motorized vertical vanes on FE09/12/18 models • i-see Sensor™ technology on FE09/12 models • Triple filtration system on FE09/12 models • H2i® high heat capabilities at low ambient temperatures MSZ-FE09/18 are 100% capacity at 5° FMSZ-FE12 is 92% capacity at 5° F
12 / MITSUBISHI ELECTRIC / m-series / SINGLE-ZONE
SINGLE-ZONE, CEILING-RECESSED, CASSETTE HEAT PUMPS
Cooling and Heating
SLZ-KA 2'x2' ceiling-recessed cassette units offer a wide airflow pattern for better air distribution in a less obtrusive style. Install SLZ in a hard ceiling (with an access panel for servicing) or in 2'x2' drop ceiling. SLZ/SUZ Heat Pumps | 3,100–17,700 Btu/h Capacity Range • 15–16 SEER, 9.6 HSPF, INVERTER-driven compressor • Provides cooling and heating in a wide range of capacities • SLZ/SUZ-KA09/1215 1:1 systems are ENERGY STAR® rated • Ventilation air knockouts • Built-in condensate lift mechanism (up to 20") • Offers a 2, 3, or 4 way airflow pattern
SINGLE-ZONE, Horizontal-ducted Heat Pumps Cooling and Heating SEZ ducted units provide comfort and efficiency while staying hidden either in the ceiling or beneath the floor. All 1:1 systems are ENERGY STAR® certified. SEZ/SUZ Heat Pumps | 3,800–19,000 Btu/h Capacity Range • 15–17.5 SEER, 10 HSPF, INVERTER-driven compressor • Provides cooling and heating in a wide range of capacities • Built-in condensate lift mechanism (up to 22") • Static capability up to 0.20" WG • Optional filter box with MERV-8 filters
Cooling Only SINGLE-ZONE, WALL-MOUNTED Air Conditioners Cooling-only Cooling only models operate quietly and efficiently to provide comfort in any room. MS/MU Air Conditioners | 9,500–12,000 Btu/h Capacity Range • 13 SEER, non-INVERTER rotary compressor • 9,500–12,000 Btu/h Capacity Range • 115 volt, single phase • Hand-held wireless remote controller only
MSY/MUY Air Conditioners | 3,800–34,600 Btu/h Capacity Range • 15.1–21 SEER, INVERTER compressor • Offers a wide vane for a wider angle of airflow, 150° from left to right • Motorized vertical vanes on GE24/D30/D36 models • Multiple ENERGY STAR® models available
M-Series systems are not suitable for critical room and low ambient cooling applications. Use commercial grade P-Series with full cooling capacity down to 0o F with wind baffle. MITSUBISHI ELECTRIC / m-series / SINGLE-ZONE / 13
MULTI-zone Products
M-SERIES MULTI-ZONE PRODUCTS AND FEATURES Total zone control: individually controlled rooms (up to 8) with a single outdoor system With the MXZ-B multi-zone system your customers can enjoy ideal levels of comfort in the rooms you use most while reducing their energy costs. Each zone operates independently. People in different rooms—like the kitchen, master bedroom or living room—can set temperatures for personalized comfort.
The Multi-Zone system features include: • Mix and match flexibility of indoor unit styles and combinations • A wide range of indoor unit capacities that match the room size and
requirements • Flexible options to tackle the most challenging multi-room installations • High efficiency, multiple ENERGY STAR® combinations • Simple, quick, and cost-effective installation MXZ-8B48
• Four-ton outdoor unit can support up to eight indoor units using
MXZ-2B20
•
MXZ-3B24
•
MXZ-3B30
•
MXZ-4B36
•
branch boxes Advanced microprocessor control Auto restart following a power outage Self-check function offering integrated diagnostics Wired and wireless control options
WALL-MOUNTED INDOOR UNITS FOR MULTI-ZONE SYSTEMS Cooling and Heating Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage. The A-control feature powers the indoor unit from the outdoor unit, and should a power outage occur, the system is automatically restored when power returns. MSZ-GE Heat Pumps | 06, 09, 12, 15, 18, 24 • INVERTER-driven compressor • Provides cooling and heating in a wide range of capacities • Offers a wide vane for a wider angle of airflow, 150° from left to right (on FE12/GE24/D30/D36 models) MSZ-FE High Efficiency Heat Pumps | 09, 12, 18 • Quiet operation as low as 22 dB(A) • Offers a wide vane for a wider angle of airflow, 150° from left to right • Motorized horizontal vanes on FE09/12/18 models • i-see Sensor™ technology on FE09/12 models • Triple filtration system on FE09/12 models
14 / MITSUBISHI ELECTRIC / m-series / MULTI-ZONE
CEILING-RECESSED INDOOR UNITS FOR MULTI-ZONE SYSTEMS Cooling and Heating SLZ-KA 2'x2' ceiling-recessed cassette units offer a wide airflow pattern for better air distribution in a less obtrusive style. Install SLZ in a hard ceiling (with an access panel for servicing) or in 2'x2' drop ceiling. SLZ Heat Pumps | 09, 12, 15 • INVERTER-driven compressor • Ventilation air knockouts • Built-in condensate lift mechanism (up to 20") • Offers a 2, 3, or 4 way airflow pattern
Horizontal-ducted Heat Pumps FOR MULTI-ZONE SYSTEMS Cooling and Heating SEZ ducted units provide comfort and efficiency while staying hidden either in the ceiling or beneath the floor. SEZ Heat Pumps | 09, 12, 15, 18 • INVERTER-driven compressor • Built-in condensate lift mechanism (up to 22") • Static capability up to 0.20" WG • Optional filter box with MERV-8 filters
FLOOR-mounted INDOOR UNITS FOR MULTI-ZONE SYSTEMS Cooling and Heating Floor-mounted indoor unit mounts on the floor or up to 5" above floor and has front panel access to the filter for ease of cleaning. It is perfect for difficult areas that may be smaller or don’t have usable space on the walls. MFZ Heat Pumps | 09, 12, 18 • Top and bottom discharge vanes • Hot-start technology • Quiet operation • Wireless remote control with smart set feature
Note: Select PLA, PCA, PEAD models are also compatible with select multi-zone MXZ-B systems
MITSUBISHI ELECTRIC / m-series / MULTI-ZONE / 15
MULTI-ZONE SYSTEM EXAMPLE
MSZ Indoor Unit
SEZ Indoor Unit
MUZ Outdoor Unit
MXZ-B Outdoor Unit
For a complete list of the MXZ-B Series approved combinations, scan the tag. www.mitsubishipro.com/ multizone
16 / MITSUBISHI ELECTRIC / m-series / MULTI-ZONE
Combination Possibilities
MXZ-2B20NA-1 (2:1) Outdoor Unit
MXZ-3B24/30NA-1 (2:1, 3:1) Outdoor Unit SEZ-KD12NA Indoor Unit
Two MSZ-GE09NA Indoor Units (Two indoor units must be installed.)
MSZ-GE09NA and MFZ-KD09NA Indoor Units (Two indoor units must be installed.)
MXZ-4B36NA-1 (2:1, 4:1) Outdoor Unit MFZ-KD09NA Indoor Unit
Two MSZ-GE09NA Indoor Units
SEZ-KD12NA Indoor Unit
(Two indoor units must be installed.)
MXZ-8B48NA-1 (2:1, 8:1) Outdoor Unit* Branch Box (Minimum of one required with MXZ-8B)
SEZ-KD15 Indoor Unit
Two MSZ-GE06NA Indoor Units
SEZ-KD09NA Indoor Unit (Two indoor units must be installed.)
MFZ-KA12NA Indoor Unit
*Illustration purposes only.
MITSUBISHI ELECTRIC / m-series / MULTI-ZONE / 17
M-SERIES ACCESSORIES
MHK1 Wireless Remote Controller Kit The flagship remote controller kit for M-Series systems, MHK1 features RedLINK™ wireless technology, easy-to-use temperature controls and a bright, backlit display. Optional Accessories
TM
MCCH1
Function
MOS1
Description
ON/OFF
On/Off operation for a single indoor unit
Operation Mode
Cool / Drying / Auto / Heat / Fan operation modes dependent on connected system
Temperature Setting
Set temperature from 40° F - 99° F depending on operation mode and connected system
System Changeover Deadband Value
2° F - 8° F
Schedule Operation
5-2, 5-1-1
Optimal Start
Eliminates the guesswork when setting your schedule. Allows the remote controller to “learn" how long your split-zoning system takes to reach programmed temperature setting, so the temperature is reached at the time you set
Fan Speed Setting
Hi/Mid-2/Mid-1/Low/Auto Available fan speed settings dependent on connected system
Airflow Direction Setting
Airflow angles: 100° - 80° - 60° - 40° and oscillate available airflow direction settings dependent on connected system
Permit/Prohibit Function
Individual prohibit operations for each remote controller function (ON/OFF, Set Temperature and Operation Mode)
Space Temperature
Displays the measured space temperature
Error Indication
Displays error code
Display Outside Temperature and Humidity
Requires optional MOS1 Outside Air Sensor
Dimensions - (W x D x H)
Remote Controller: 5-3/16" x 1-1/2" x 3-9/16" Receiver: 3-1/4" x 1-5/16" x 6-7/16"
Operating Ambient Temperature
Remote Controller: 32° F - 120° F Receiver: -40° F – 165° F
Operating Ambient Humidity
Remote Controller: 5% - 90% RH (non-condensing) Receiver: 5% - 90% RH (non-condensing)
Power Supply
2 AA batteries (included)
Note: MHK1 Compatible with current INVERTER-driven M-Series as noted in data charts.
18 / MITSUBISHI ELECTRIC / m-series / accessories
Specifications are subject to change without notice
Ball Valves
DIAMONDBACK BV-SERIES BALL VALVES Diamondback BV-Series ball valves include the following features:
Model Numbers: BV14FFSI BV14FFSI BV14FFSI BV14FFSI
• • • •
Engineered for mini-split and multi-split units Full port design with flare connections 700 PSIG rated Flare connections
Other important information:
• • • •
Size available: 1/4", 3/8", 1/2", 5/8" Fully factory assembled Furnace brazed and pressure tested Each ball valve is equipped with Schrader® Valve for refrigerant service
• • • • •
Temperature range: -40° F to +325° F (-40° C to +149° C) Forged brass body and seal cap Polytetrafluoroethylene (PTFE) seals and gaskets (no synthetic O-rings) Seal cap design permits valve operation without removal of seal cap One-year limited materials and workmanship warranty on ball valves
Part Number
SAE Flare
A
B
C
D
E
F
BV14FFSI
1/4"
6.19
2.60
1.80
1.22
1.42
1.10
BV38FFSI
3/8"
6.30
2.67
1.80
1.22
1.42
1.10
BV12FFSI
1/2"
6.51
2.67
1.80
1.22
1.42
1.10
BV58FFSI
5/8"
6.64
2.67
1.80
1.28
1.42
1.10
Platform Stands
DIAMONDBACK PLATFORM STANDS Lift the outdoor unit to new heights.
• • • •
Easy to install Available for all system sizes Color matched to the outdoor units One-year warranty
Model DSD-400N L: 15 3/4" W: 3 1/4" H: 3 1/4"
MITSUBISHI ELECTRIC / m-series / accessories / 19
Linesets
DIAMONDBACK LINESETS Diamondback linesets include the following features: • Quick, efficient, and economical field
• • Caps On
• •
installation using factory applied Twin-Tube insulation and flare connections with flare nuts mounted Correct lengths for reducing waste and time Quality, consistency, and economy All Diamondback lineset tubing is tested in accordance with ASTM E243 One year warranty
Lineset Part Number
Tube Size (IN.)
Length
Insul.
MLS143812T-15
1/4 x 3/8
15
1/2"
MLS143812T-30
1/4 x 3/8
30
MLS143812T-50
1/4 x 3/8
MLS143812T-65
“TWIN-TUBE” LINESET INSULATION DESIGN • Balanced outside diameter for uniform coil/uncoil position stability. • Minimum 1/2” insulation thickness on both tubes
Tube Size (IN.)
Length
Insul.
MLS145812T-30
1/4 x 5/8
30
1/2"
1/2"
MLS145812T-50
1/4 x 5/8
50
1/2"
50
1/2"
MLS145812T-65
1/4 x 5/8
65
1/2"
1/4 x 3/8
65
1/2"
MLS145812T-100
1/4 x 5/8
100
1/2"
MLS141212T-15
1/4 x 1/2
15
1/2"
MPLS385812T-10 3/8 x 5/8
10
1/2"
MLS141212T-30
1/4 x 1/2
30
1/2"
MPLS385812T-15 3/8 x 5/8
15
1/2"
MLS141212T-50
1/4 x 1/2
50
1/2"
MPLS385812T-30 3/8 x 5/8
30
1/2"
MLS141212T-65
1/4 x 1/2
65
1/2"
MPLS385812T-50 3/8 x 5/8
50
1/2"
MLS141212T-100
1/4 x 1/2
100
1/2"
MPLS385812T-65 3/8 x 5/8
65
1/2"
MLS145812T-15
1/4 x 5/8
15
1/2"
MPLS385812T-100
3/8 x 5/8
100
1/2"
(FT.)
Lineset Part Number
(FT.)
Filter Boxes FILTER BOXES FB Series filter boxes are available in compatible sizes for all M-Series horizontal ducted indoor units. FBL1 filter boxes include 1" thick pleated MERV 8 filter(s) installed. Filters are tested in accordance with ANSI/ASHRAE Standard 52.2 and Rated Class 2 under U.L. Standard 900. The cabinet is constructed of non-insulated 20 gauge, G-60 galvanized steel with a foam gasket and provides an air-tight connection to the indoor unit and access door. Gasket material complies with UL 723 requirements. In addition, a screw-through cabinet design for secure attachment to indoor unit and return connection in rear is easily field-converted to bottom return. Part Number
Part Description
FBL1-1
FB Series Filter Box for SEZ-KD09NA4
FBL1-2
FB Series Filter Box for SEZ-KD12/15NA4
FBL1-3
FB Series Filter Box for SEZ-KD18NA4
FBM2-3
FB Series Filter for PEAD-A24AA4/30AA4
20 / MITSUBISHI ELECTRIC / m-series / accessories
M-SERIES PRODUCT SPECIFICATIONS
MITSUBISHI ELECTRIC / m-series / 21 MITSUBISHI ELECTRIC / m-series / specifications / 21
Single Zone I MS Cooling-Only Model Name
Cooling *1
Power Supply Voltage
MS-A09WA
MS-A12WA
Outdoor Unit
MU-A09WA
MU-A12WA 12,000
Rated Capacity
Btu/h
9,500
Capacity Range
Btu/h
-
-
Total Input
W
870
1,070
Energy Efficiency
SEER
Moisture Removal Sensible Heat Factor Phase, Cycle, Voltage Indoor - Outdoor L1-N Indoor - Outdoor N-2 Indoor - Remote Controller MCA Fan Motor
Pints/h
Airflow (Lo-Med-Hi-Powerful)
Indoor Unit
Non-inverter
Indoor Unit
Sound Pressure Level (Lo-Med-Hi-Powerful) External Finish Color
13 2.7 0.68
3.2 0.70 1 Phase, 60Hz, 115V *2 AC 115V AC 115V Wireless Type 1.2 0.95
A F.L.A. DRY (CFM)
183-261-335-367
222-286-406-446
WET (CFM)
162-233-300-328
198-254-363-399
26-32-40-42
33-38-45-47
dB(A)
Munsell No. 1.0Y 9.2/0.2 W: In.
Dimension Unit
Remote Controller
30-11/16
D: In.
8-1/4
H: In.
11-3/4
Weight Unit
Lbs.
23
Field Drainpipe Size O.D.
In.
5/8
Type
Hand-held Wireless Remote Controller
MCA
A
14
16
MOCP
(Time Delay) A
15
20
Fan Motor
F.L.A.
0.63
Model (Type) Compressor
Outdoor Unit
Airflow
R.L.A.
9.3
L.R.A.
47
56
CFM
1,083
1,327
dB(A)
47
W: In.
31-1/2
D: In.
11-1/4
11-7/16
H: In.
21-5/8
23-13/16
Lbs.
78
Refrigerant Control Sound Pressure Level (Cooling) *1
Weight Refrigerant
Lbs., Oz.
Oil
Type (Fl. Oz.)
Gas Side O.D. Refrigerant Pipe
Connection Method
Height Difference (Max.)
52 Munsell No. 3Y 7.8/1.1
Type Charge
Liquid Side O.D.
10.82
Capillary Tube
External Finish Color Dimensions
0.93 Single Rotary
33-7/16
96 R410A
In.
2, 5
3, 1 NE022 (10.8)
3/8
Ft..
1/2 1/4 35
Length (Max.)
65
Indoor/Outdoor
Flared/Flared
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling) - Indoor D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
22 / MITSUBISHI ELECTRIC / m-series / specifications
Single Zone I MSY Cooling-Only Indoor Unit
Model Name
Cooling *1
Power Supply Voltage
Outdoor Unit
MUY-GE09NA
MSY-GE24NA
MSY-D30NA-8
MSY-D36NA-8
MUY-GE12NA MUY-GE15NA-1 MUY-GE18NA-1 MUY-GE24NA
MUY-D30NA-1
MUY-D36NA-1
Rated Capacity
Btu/h
9,000
12,000
14,000
17,200
22,500
30,700
34,600
Capacity Range
Btu/h
3,800-12,200
3,800-13,600
3,100-18,200
3,700-18,700
8,200-31,400
9,800-30,700
9,800-34,600
Total Input Energy Efficiency Moisture Removal Sensible Heat Factor Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Indoor - Outdoor S2 - S3 Indoor - Remote Controller MCA Fan Motor Airflow at Cooling (Quiet-Lo-Med-HiSuper Hi or Lo-Med-Hi-Powerful)*1
Indoor Unit
MSY-GE09NA-8 MSY-GE12NA-8 MSY-GE15NA-8 MSY-GE18NA-8
Sound Pressure Level at Cooling (Quiet-Lo-Med-Hi-Super Hi or Lo-Med-Hi-Powerful) *1
W
660 (205-1,200)
960 (205-1,300)
SEER
21
20.5
21
Pints/h
1.5 0.82
2.5 0.74
2.7 0.80
A F.L.A. DRY (CFM) WET (CFM) dB(A)
1,080 (160-2,000) 1,640 (240-2,070) 1,800 (570-3,580) 3,380 (620-3,380) 4,240 (620-4,240)
109-134-201-286-364 19-22-30-37-45
26-32-38-44-49
External Finish Color Dimension Unit Weight Unit Field Drainpipe Size O.D. Remote Controller
Compressor
Outdoor Unit
Airflow (Cooling) Refrigerant Control Sound Pressure Level at Cooling *1
Refrigerant
Weight Type Charge Oil
Refrigerant Pipe Refrigerant Pipe Length Connection Method
Gas Side O.D. Liquid Side O.D.
15.1 11.9 0.62
389-639-848-887 350-576-763-798
34-41-49-53
32-42-49-51
Munsell No. 1.0Y 9.2 / 0.2 31-7/16
43-5/16
46-1/16
D: In. H: In. Lbs. In.
9-1/8 11-5/8 22
9-3/8 12-13/16 37
11-5/8 14-3/8 40
5/8 Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
A A F.L.A. Model (Type) R.L.A. L.R.A. CFM
12
1,151
dB(A)
46
14
17.1 20
15
21 25
0.50
0.93
DC INVERTER-driven
DC INVERTER-driven Twin Rotary
4.9 6.1
6.8 8.5 1,243
1,229
10.0 12.5 1,730 Linear Expansion Valve
49
12.9 16.1 1,769
16 20 1,941
54
External Finish Color Dimensions
28-33-38-44-49
16 9.9 0.64
W: In.
Type MCA MOCP Fan Motor
19
4.6 5.1 0.71 0.75 1-phase, 60Hz, 208 / 230V *2 AC 208 / 230V DC12-24V Wireless Type (Optional Wired Controller: DC 12V) 1.0 0.76 205-272-335230-275-339388-469-628-738 420-533 420-533 170-237-300194-240-304347-420-562-661 385-498 385-498
145-170-237-321-399
19-22-30-37-43
19.2
55
56
Munsell No. 3Y 7.8 / 1.1 W: In. D: In.
31-1/2 11-1/4
13
13
13
H: In.
21-5/8
33-7/16
34-5/8
33-7/16
Lbs. Lbs., Oz. Type (fl. oz.) In. In.
66
33-1/16
77
1, 12
80
119 R410A 3, 7
2, 9 NEO22 (10.8)
NEO22 (15.2)
3/8 1/4
1/2 1/4
126 4, 3
4
FV50S (13.52)
NE022 (29.4) 5/8 3/8
Height Difference (Max.)
Ft..
40
50
Length (Max.)
Ft..
65
100
Indoor/Outdoor
Flared/Flared
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling) - Indoor D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
MITSUBISHI ELECTRIC / m-series / specifications / 23
Single Zone I MSZ Heat Pump Model Name
Cooling *1
Indoor Unit
MSZ-FE09NA-8
MSZ-FE12NA-8
MSZ-FE18NA
MSZ-GE09NA-8
MSZ-GE12NA-8
Outdoor Unit
MUZ-FE09NA-1
MUZ-FE12NA1
MUZ-FE18NA
MUZ-GE09NA
MUZ-GE12NA
Rated Capacity
Btu/h
9,000
12,000
18,000
9,000
12,000
Capacity Range
Btu/h
2,800-9,000
2,800-12,000
8,200-25,200
3,800-12,200
3,800-13,600
Total Input
W
580 (160-650)
930 (160-960)
1,270 (570-2,280)
660 (205-1,200)
960 (205-1,300)
Energy Efficiency
SEER
26
23
20.2
21
20.5
Moisture Removal Sensible Heat Factor
Pints/h
2.1 0.76
2.9 0.73
2.7 0.84
1.5 0.82
2.5 0.74
Rated Capacity
Btu/h
21,600
10,900
Capacity Range Heating at 47° F *2 Total Input HSPF (IV) Rated Capacity Heating at 17° F *3 Rated Total Input Maximum Capacity Heating at 5° F Maximum Capacity Power Supply Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Voltage Indoor - Outdoor S2 - S3 Indoor - Remote Controller MCA Fan Motor Airflow at Cooling (Lo-Med-Hi-Super HI-Powerful) *1 Airflow at Heating (Lo-Med-Hi-Super HI-Powerful) *2 Sound Pressure Level at Cooling (LoMed-Hi-Super HI-Powerful) *1 Sound Pressure Level at Heating (LoMed-Hi-Super HI-Powerful) *2
Indoor Unit
10,900
13,600
3,000-18,000 710 (150-2,250) 10 6,700 650 12,500 10,900
3,000-21,000 950 (150-2,250) 10.5 7,900 750 13,600 12,500
DRY (CFM)
162-226-339-381
162-226-381-410
388-469-628-738
145-170-237-321-399
145-170-237-321-399
WET (CFM)
144-202-307-343
144-202-350-367
347-420-562-661
109-134-201-286-364
109-134-201-286-364
WET (CFM)
166-240-367-381
166-240-399-420
388-469-628-738
145-170-237-321-406
145-170-237-321-406
dB(A)
22-31-39-42
22-33-43-45
34-41-49-53
19-22-30-37-43
19-22-30-37-45
dB(A)
22-31-40-42
22-33-43-44
32-41-49-52
19-22-30-37-43
19-22-30-37-43
Btu/h W Btu/h/W Btu/h W Btu/h Btu/h
A F.L.A.
External Finish Color Dimension Unit Weight Unit Field Drainpipe Size O.D. Remote Controller
Munsell No. 1.0Y 9.2 / 0.2 43-5/16
31-7/16
D: In. H: In. Lbs. In.
10-1/8 11-5/8 27
9-3/8 12-13/16 37 5/8
9-1/8 11-5/8 22
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller) 12
12
17.1
A
MOCP
A
15
20
15
Fan Motor
F.L.A.
0.56
0.93
0.50
Airflow (Cooling/Heating)
Model (Type) R.L.A. L.R.A. CFM
DC INVERTER-driven Twin Rotary 8.6 10.8 1,102 / 1,187
DC INVERTER-driven 12.9 16.1 1,769 / 1,701
6.6 8.2 1,151 / 1,225
1,229 / 1,172
Linear Expansion Valve
Defrost Method
Refrigerant Pipe Length
8,800 900 11,200 9,194
31-3/8
Refrigerant Control
Refrigerant Pipe
10
MCA
Compressor
Refrigerant
5,500-18,100 1,170 (340-1,660)
W: In.
Type
Outdoor Unit
14,400
7,500-29,700 4,500-14,100 1,540 (520-2,240) 760 (255-1,200) 10.3 11,700 6,600 1,240 700 21,600 8,700 21,600 7,061 1 Phase, 60Hz, 208/230V *4 AC 208 / 230V DC12-24 Wireless Type (Optional Wired Controller: DC12V) 1.0 0.76
Reverse Cycle
Sound Pressure Level at Cooling *1
dB(A)
48
55
46
49
Sound Pressure Level at Heating *2 External Finish Color
dB(A)
49
55 Munsell No. 3Y 7.8 / 1.1
50
51
W: In.
31-1/2
33-1/16
31-1/2
Dimensions
D: In. H: In.
11-1/4 21-5/8
13 34-5/8
11-1/4 21-5/8
Weight
Lbs.
80
119
66 1, 12
Type Charge
Lbs., Oz.
Oil
Type (fl. oz.)
Gas Side O.D. Liquid Side O.D. Height Difference (Max.)
Length (Max.) Connection Method Indoor/Outdoor
77
2, 9
R410A 4, 3
NE022 (15.2)
FV50S (13.5)
NE022 (10.8)
In. In.
3/8 1/4
5/8 3/8
3/8 1/4
Ft.
40
50
40
Ft.
65
100 Flared/Flared
65
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C).
2, 9
*3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C). *4. Indoor units receive power from outdoor units through field-supplied interconnected wiring. Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
24 / MITSUBISHI ELECTRIC / m-series / specifications
Single Zone I MSZ Heat Pump Model Name
Cooling *1
Indoor Unit
MSZ-GE15NA-8
MSZ-GE18NA-8
MSZ-GE24NA
MSZ-D30NA-8
MSZ-D36NA -8
Outdoor Unit
MUZ-GE15NA-1
MUZ-GE18NA-1
MUZ-GE24NA
MUZ-D30NA-1
MUZ-D36NA-1
Rated Capacity
Btu/h
14,000
17,200
22,500
30,700
33,200
Capacity Range
Btu/h
3,100-18,200
3,700-18,700
8,200-31,400
9,800-30,700
9,800-33,200
1,080 (160-2,000)
1,640 (240-2,070)
1,800 (570- 3,580)
3,850 (620-3,850)
21
19.2
19.0
Total Input
W
Energy Efficiency
SEER
Moisture Removal
Pints/h
Sensible Heat Factor Heating at 47º F *2
Heating at 17º F *3
(c on t.)
Rated Capacity
Btu/h
Capacity Range
Btu/h
Total Input
W
HSPF (Region IV)
Btu/h/W
Rated Capacity
4,360 (620-4,360)
14.5
2.7
4.6
5.1
9.9
0.80
0.71
0.75
0.64
11.3 0.62
18,000
21,600
27,600
32,600
35,200
4,800-20,900
3,500-25,200
7,500-36,900
8,700-34,000
8,700-36,000
1,600 (270-2,010)
1,900 (230-2,680)
2,340 (520- 3,650)
3,360 (520-3,600)
3,840 (520-4,100)
Btu/h
11,300
13,400
16,000
19,500
21,800
Rated Total Input
W
1,150
1,450
1,770
2,620 *5
3,000 *5
8.2
10
Maximum Capacity
Btu/h
15,900
17,200
24,600
20,800
22,800
Heating at 5º F
Maximum Capacity
Btu/h
13,022
13,562
21,160
16,305
19,090
Power Supply
Phase, Cycle, Voltage Indoor - Outdoor S1-S2 Indoor - Outdoor S2-S3 Indoor - Remote Controller MCA Fan Motor
Voltage
Airflow at Cooling (Lo-Med-HiSuper HI-Powerful) *1
Indoor Unit
Airflow at Heating (Lo-Med-HiSuperHI-Powerful) *2 Sound Pressure Level (Cooling) (Lo-Med-Hi-Super HI-Powerful) *1 Sound Pressure Level (Heating) (Lo-Med-Hi-Super HI-Powerful) *2 External Finish Color Dimension Unit
1 Phase, 60Hz, 208/230V *4 AC 208 / 230V DC12-24 Wireless Type (Optional Wired Controller: DC12V) 1.0 0.76
A F.L.A. DRY (CFM)
205-272-335-420-533 230-275-339-420-533
388-469-628-738
389-639-848-887
WET (CFM)
170-237-300-385-498 194-240-304-385-498
347-420-562-661
350-576-763-798
DRY (CFM)
205-247-304-367-463 230-275-339-431-512
388-469-628-738
445-639-848-887
34-41-49-53
32-42-49-51
32-41-49-52
34-42-49-50
26-32-38-44-49
28-33-38-44-49
26-30-35-40-46
28-33-38-44-49
dB(A) Munsell No. 1.0Y 9.2/0.2 W: In.
31-7/16
31-7/16
43-5/16
46-1/16
D: In.
9-1/8
9-1/8
9-3/8
11-5/8
11-5/8
12-13/16
14-3/8
H: In. Weight Unit Field Drainpipe Size O.D. Remote Controller Type MCA MOCP Fan Motor
Lbs. In.
22
37 40 5/8 Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
A A F.L.A.
12
14
0.93
Outdoor Unit
Dimensions
Weight
DC INVERTER-driven Twin Rotary
R.L.A.
7.4
10.0
12.9
L.R.A.
9.3 1,243 / 1,229
12.5
16.1
1,730 / 1,659
49 51
54 56
Airflow CFM Refrigerant Control Defrost Method Sound Pressure Level at Cooling *1 dB(A) Sound Pressure Level at Heating *2 dB(A) External Finish Color W: In.
31-1/2
D: In.
11-1/4
H: In.
21-5/8
Lbs.
80
Lbs., Oz.
Oil
Type (Fl. Oz.)
Refrigerant Pipe
Liquid Side O.D. Height Difference (Max.) Length (Max.)
Connection Method
20
1,769 / 1,701 Linear Expansion Valve Reverse Cycle 55 55 Munsell No. 3Y 7.8/1.1
1,941
57
56
13 33-7/16
33-7/16 119
141 R410A
Charge Gas Side O.D.
16
33-1/16
Type Refrigerant
21 25
0.50
Model (Type) Compressor
17.1 20
15
NE022 (15.2)
4, 3
4, 10
FV50S (13.5)
NE022 (29.4) 5/8
1/2 1/4
In. Ft.
3, 7
2, 9
3/8 50
40
100
65
Indoor/Outdoor
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C).
Flared/Flared *3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C). *4. Indoor units receive power from outdoor units through field-supplied interconnected wiring. *5. Maximum Total Input Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
MITSUBISHI ELECTRIC / m-series / specifications / 25
Single Zone I SEZ Heat Pump Indoor Unit Outdoor Unit
Model Name
Cooling *1
Heating at 47° F *2
Heating at 17° F *3 Power Supply Voltage
8,100
11,500
14,100
17,200
Btu/h
3,800-10,900
3,800-13,300
3,800-17,000
3,800-19,000
Total Input
W
670
920
1,170
1,380
Energy Efficiency Moisture Removal Sensible Heat Factor
SEER Pints/h
15 1.5 0.80
16 2.4 0.76
15.5 2.6 0.80
17.5 3.4 0.79
Rated Capacity
Btu/h
Capacity Range Total Input HSPF (IV) Rated Capacity Rated Total Input Maximum Capacity Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Indoor - Outdoor S2 - S3 MCA Fan Motor
Btu/h W Btu/h/W Btu/h W Btu/h
A F.L.A.
Weight Unit Drain-lift Mechanism Field Drainpipe Size O.D. Type MCA MOCP Fan Motor Compressor Airflow (Cooling/Heating)
Dimensions
Refrigerant Pipe Length
13,600
18,000
21,600
4,800-16,400 1,140
4,800-21,100 1,500
4,800-24,900 1,700
10.0 9,000 11,900 920 1,200 9,000 11,900 1 Phase, 60Hz, 208 / 230V *4 AC 208-230V DC 12-24V 1 0.57
6,700 810 6,700
0.51
13,100 1,350 13,100
0.74
194-247-317
247-317-388
353-441-529
423-529-635
WET (CFM) In. W.G. dB(A)
174-222-285
222-285-349 317-396-476 0.02-0.06-0.14-0.20 23-28-33 30-34-37 Galvanized-Steel Sheets
381-476-572
39
46-7/8
D: In. H: In. Lbs. H: In. In. A A F.L.A. Model (Type) R.L.A. L.R.A. CFM
23-26-30 31-1/8
30-34-38
27-9/16 7-7/8 42
50
54 62 21-11/16 1-1/4 Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers 12 14 15 0.50 0.93 DC Inverter
DC Inverter Twin Rotary
6.6 8.2 1,151/1,225
7.4 9.3 1,243/1,229
1,229/1,172
Refrigerant Control Defrost Method Sound Pressure Level at Cooling *1 Sound Pressure Level at Heating *2 External Finish Color
Refrigerant Pipe
10,900 4,800-14,100 1,020
DRY (CFM)
W: In.
Refrigerant
SEZ-KD18NA4 SUZ-KA18NA
Btu/h
Dimension Unit
Outdoor Unit
SEZ-KD15NA4 SUZ-KA15NA
Capacity Range
External Static Pressure *3 Sound Pressure Level (Lo-Med-Hi) External Finish
Remote Controller
SEZ-KD12NA4 SUZ-KA12NA
Rated Capacity
Airflow at Cooling/Heating (Lo-Med-Hi)
Indoor Unit
SEZ-KD09NA4 SUZ-KA09NA
10 12.5 1,730/1,659
Linear Expansion Valve
W: In.
Reverse Cycle 49 51 Munsell No. 3Y 7.8/1.1 31-1/2
D: In.
11-1/4
13
H: In. Lbs.
21-5/8 77
33-7/16 119
dB(A) dB(A)
46 50
33-1/6
Weight Type Charge Oil Gas Side O.D. Liquid Side O.D.
Lbs., Oz. Type (fl. oz.) In. In.
Height Difference (Max.)
Ft.
40
50
Ft.
65
100
Length (Max.) Connection Method Indoor/Outdoor
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C). *3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C).
26 / MITSUBISHI ELECTRIC / m-series / specifications
66
54 56
80 R410A 2, 9
2 NEO22 (10.8) 3/8
4 NEO22 (15.2) 1/2
1/4
Flared/Flared
*4. Indoor units receive power from outdoor units through field-supplied interconnected wiring. Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
E
Ex
E
Ex
High High
RatedRated point point
Low Low
MiddleMiddle
[0.04] [0.04]
[0.04] [0.04] Low Low RatedRated point point
SEZ Static Performance Curves
0 0 [141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353] rate [CFM] AirflowAirflow rate [CFM]
SEZ-KD12NA4 SEZ-KD12NA4
SEZ-KD09NA4 SEZ-KD09NA4 [0.20] [0.20]
(External pressure 0.14[in.WG]) 208/230V (External staticstatic pressure 0.14[in.WG]) 208/230V 60Hz60Hz
[0.32] [0.32]
Limit Limit
External Static Pressure [in.WG] External Static Pressure [in.WG]
External Static Pressure [in.WG] External Static Pressure [in.WG]
(External pressure 0.20[in.WG]) 208/230V (External staticstatic pressure 0.20[in.WG]) 208/230V 60Hz60Hz
70 70 [0.12] [0.28] [0.28] [0.12]
External static pressure [in.WG]
[0.16]
High
Rated point
Low
[0.04]
[318]
0 [141]
[353]
[176]
[212] [247] [282] Airflow rate [CFM]
[318]
(External static pressure 0.06[in.WG]) 208/230V 60Hz
20 20 [0.08] [0.08]
Rated point Rated point
[0.20] static pressure 0.20[in.WG]) 208/230V 60Hz (External
RatedRated point point High
[0.20] [0.20]
[0.08] [0.08] [0.16] [0.16]
[0.04]
[0.08] [0.08]
Low
0 [0.04] 0 [0.04] [212] [247] [282] [318] [353] [388] [424] [212] [247] [282] [318] [353] [388] [424] 0 Airflow rateAirflow [CFM]rate [CFM] 0 [141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353] rate [CFM] AirflowAirflow rate [CFM]
SEZ-KD15NA4 SEZ-KD15NA4 (External (External static static pressure pressure 0.06[in.WG]) 0.06[in.WG]) 208/230V 208/230V 60Hz 60Hz SEZ-KD12NA4 SEZ-KD12NA4
(External static pressure 0.20[in.WG]) 208/230V (External static pressure 0.20[in.WG]) 208/230V 60Hz 60Hz [0.20] [0.20]
Limit Limit
[0.32]
[0.32]
Middle
2]
[318]
[353]
30V 60Hz
[0.04] 0 [212] 0
[247]
[141]
[176]
[282]
[388]
High
[0.20]
Rated point
Middle
[565]
0 [212]
[424]
[353]
[388] [424] [459] Airflow rate [CFM]
[247]
[282]
[318]
[0.20] 80 [0.32]
[494]
[353]
[530]
[388]
External Static Pressure [in.WG] External Static Pressure [in.WG]
High
[565] [600] [636] [671] [565]
10 [0.04] 0 [318] 0 [282]
High
Rated point
Low
Low
40 40 [0.16] 20 [0.16] 20 [0.08][0.08] 30 30 [0.12] [0.12]
10 2010 20 [0.08] [0.08] [0.04][0.04]
Low
RatedRated pointpoint
[353] [388] [318]
[353]
[424]
[494]
Low Low Low
[530]
RatedRated pointpoint
Low
[424]
SEZ-KD18NA4 SEZ-KD18NA4
SEZ-KD18NA4 SEZ-KD18NA4
(External (External staticstatic pressure pressure 0.14[in.WG]) 0.14[in.WG]) 208/230V 208/230V 60Hz60Hz
[459] [494] [530] [565] [600] [636] [671]
Airflow[424] rate [CFM] [388] [459] Airflow rate [CFM]
Rated point Rated point Middle Middle Middle Middle
10 10 [0.04] [0.04] 0 0 [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] [600] [600] [636] [636] [671] [671] 0 0 Airflow Airflow rate [CFM] rate [CFM] [282] [282] [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] Airflow Airflow rate [CFM] rate [CFM]
Airflow Airflow rate [CFM] rate [CFM] [282] [282] [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] Airflow Airflow rate [CFM] rate [CFM]
(External (External staticstatic pressure pressure 0.20[in.WG]) 0.20[in.WG]) 208/230V 208/230V 60Hz60Hz [0.32][0.32] LimitLimit
[565]
[0.28][0.28]
[0.24][0.24]
High High
[0.20][0.20]
[0.16][0.16]
Middle Middle RatedRated pointpoint
[0.12][0.12]
Rated point
Low
2010 [0.04] [0.08]
Rated point
Rated point Rated point MiddleMiddle
Middle Middle
30 30 50 [0.12] 50 [0.12] [0.20] [0.20]
[0.04] [0.04] 0 0 [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] [600] [600] [636] [636] [671] [671] 0 [318] [318] 0 [353] [353]
[565]
High High High High
LimitLimit
Middle Middle
40 [0.16] 20 [0.08] 30 [0.12]
LimitLimit Limit Limit
70 70 40 [0.28] 40 [0.28] [0.16][0.16]
[0.28][0.28]
30 50 [0.12] [0.20]
Rated point
High High
Limit Limit
60 [0.24]
gh
[0.20][0.20] 80 80 [0.32] [0.32]
[0.32][0.32]
7040 [0.28] [0.16]
High
[0.08][0.08]
[0.04][0.04] [0.08] [0.08]
Low
50 static pressure 0.20[in.WG]) 208/230V 60Hz (External
Limit
230V 60Hz
High
Airflow rate [CFM] SEZ-KD18NA4 (External static pressure 0.06[in.WG]) 208/230V 60Hz SEZ-KD15NA4
Limit
High High
Low Low
[318]
Low
60 60 [0.24] [0.24]
[0.16] [0.16]
[0.12] [0.04]
0 [282] [0.04]
Limit Limit
[0.12][0.12]
[0.20] [0.20]
[0.08]
230V 60Hz 30V 60Hz
[530]
[0.28] [0.28]
Rated point
Low
0 [0.04] [0.04]0 [282] [282] [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] Airflow Airflow rate [CFM] rate [CFM] 0 0 [212] [247] [282] [318] [353] [388] [424] [212] [247] [282] [318] [353] [388] [424] Airflow rateAirflow [CFM]rate [CFM]
LimitLimit
[0.12] [0.12]
Low
Middle Rated point Rated point
Low
(External (External static static pressure pressure 0.20[in.WG]) 0.20[in.WG]) 208/230V 208/230V 60Hz 60Hz 50 50
[0.16][0.16]
Middle
[0.08] [0.16]
Middle Low
[0.04] [0.04] [0.08] [0.08]
[0.32] [0.32]
[0.24] [0.24]
[0.24] [0.12]
[0.12]
(External (External static static pressure pressure 0.14[in.WG]) 0.14[in.WG]) 208/230V 208/230V 60Hz 60Hz
External Static Pressure [in.WG]
[530]
Rated point Rated point
Low
[0.12]
Low Low
[0.20][0.20]
RatedRated pointpoint
[0.12][0.12] [0.08][0.08]
[0.04][0.04]
[0.04][0.04]
Airflow Airflow rate [CFM] rate [CFM]
Middle Middle
[0.16][0.16]
[0.08][0.08]
0 0 [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] [600] [600] [636] [636] [671] [671]
High High
[0.24][0.24]
Low Low
0 0 [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] [600] [600] [636] [636] [671] [671] Airflow Airflow rate [CFM] rate [CFM]
Note: ESP at 208/230V, 60 Hz. See manual for Static Performance Curve, including at 0.02 in W.G.
SEZ-KD18NA4
(External static pressure 0.20[in.WG]) 208/230V 60Hz [0.32]
High
MiddleMiddle
[0.16] [0.16] [0.08] [0.08]
SEZ-KD18NA4 SEZ-KD18NA4 SEZ-KD15NA4 SEZ-KD15NA4 (External (External staticstatic pressure pressure 0.06[in.WG]) 0.06[in.WG]) 208/230V 208/230V 60Hz60Hz
Limit
Limit
[0.16] [0.28]
Middle
High High
Rated point Rated point High
SEZ-KD18NA4 SEZ-KD18NA4 SEZ-KD15NA4 SEZ-KD15NA4 (External (External staticstatic pressure pressure 0.02[in.WG]) 0.02[in.WG]) 208/230V 208/230V 60Hz60Hz
External Static Pressure [in.WG] External Static Pressure [in.WG]
ExternalExternal Static Pressure [in.WG][in.WG] Static Pressure
Rated point
[494]
[388] [318]
[0.32]
High
ted point
3]
[353]
(External static pressure 0.06[in.WG]) 208/230V 60Hz
High
[494]
[318]
rate [CFM][282] [212] Airflow[247] Airflow rate [CFM]
Middle
Low
Low
[0.20] (External static pressure 0.20[in.WG]) 208/230V 60Hz
Limit
Low
High
0 [0.04] 0 [0.04] [282] [282] [318] [318] [353] [353] [388] [388] [424] [424] [459] [459] [494] [494] [530] [530] [565] [565] Airflow Airflow rate [CFM] rate [CFM] 0 0 [424] [212] [247] [282] [318] [353] [388] [424] [212] [247] [282] [318] [353] [388] [424] Airflow rateAirflow [CFM]rate [CFM] [353]
SEZ-KD12NA4 Limit
[0.08]
[0.08]
Low
SEZ-KD15NA4
0V 60Hz
Rated point MiddleMiddle High Rated point
[0.12] [0.12] [0.04] [0.04]
[0.24]
[0.12] [0.12] [0.20] [0.20]
External Static Pressure [in.WG]
[424]
High High
[0.16]
External Static Pressure [in.WG] External Static Pressure [in.WG]
[388]
[0.16]
Rated point Low
ed point
[0.20] [0.20] [0.08] [0.08]
[0.24]
External Static Pressure [in.WG]
[0.12]
Limit
External Static Pressure [in.WG] External Static Pressure [in.WG]
Middle
[0.16] [0.08]
Limit
Limit
[0.16] [0.16] [0.28] [0.28]
External Static Pressure [in.WG] External Static Pressure [in.WG]
High
[0.24]
External Static Pressure [in.WG] External Static Pressure [in.WG]
Rated point
[0.24]
Limit
External Static Pressure [in.WG] External Static Pressure [in.WG]
[0.12] [0.20]
[0.04] [0.08]
]
Limit
External Static Pressure [in.WG] External Static Pressure [in.WG]
High [0.24]
[0.28] [0.28] [0.12] [0.12]
External Static Pressure [in.WG]
ed point High
External Static Pressure [in.WG]
External StaticStatic Pressure [in.WG] External Pressure [in.WG]
Limit
High
Limit
[0.16] [0.28]
External Static Pressure [in.WG]
[0.32]
High
Low Low Low
Limit Limit
it
Limit
Middle Middle Middle Middle Rated point Rated point
[0.12] [0.12]
[0.04]
[0.32]
[0.32]
High High Limit
[0.24] [0.24] [0.12] [0.12]
LowLow Low
(External static pressure 0.14[in.WG]) 208/230V 60Hz (External [0.16] static [0.16] pressure 0.14[in.WG]) 208/230V 60Hz
SEZ-KD09NA4
0V 60Hz
High High RatedRated point point Middle Middle Middle Middle
SEZ-KD15NA4 SEZ-KD15NA4 (External (External static static pressure pressure 0.02[in.WG]) 0.02[in.WG]) 208/230V 208/230V 60Hz 60Hz SEZ-KD12NA4 SEZ-KD12NA4
SEZ-KD12NA4
0V 60Hz
40 40 [0.16] [0.16]
Low 10 10 0 0[0.04] [0.04] [212] [247] [282] [318] [353] [388] [424] [212] [247] [282] [318] [353] [388] [424] 0 Airflow rateAirflow [CFM]rate [CFM] 0 [353] [141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353] rate [CFM] AirflowAirflow rate [CFM]
ated point
]
High High
30 30 [0.12] [0.12] [0.04] [0.04]
Middle
Limit
Limit
50 50 [0.20] [0.20] [0.08] [0.08]
High
[0.12]
[0.08]
60 60 [0.24] [0.24]
Limit Limit
[0.16] [0.16] [0.28] [0.28] External Static Pressure [in.WG]
80 80 [0.32] [0.32]
Limit
External Static Pressure [in.WG]
[0.20]
Limit
static pressure 0.06[in.WG]) 208/230V (External(External static pressure 0.06[in.WG]) 208/230V 60Hz 60Hz
SEZ-KD09NA4 SEZ-KD09NA4 [0.16] [0.16]
(External static pressure 0.06[in.WG]) 208/230V 60Hz
V 60Hz
SEZ-KD12NA4 SEZ-KD12NA4
static pressure 0.02[in.WG]) 208/230V (External(External static pressure 0.02[in.WG]) 208/230V 60Hz 60Hz
SEZ-KD09NA4
External Static Pressure External Static Pressure [in.WG] [in.WG]
E AND CORRECTED AIR FLOW
0 0 [141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353] rate [CFM] AirflowAirflow rate [CFM]
MITSUBISHI ELECTRIC / m-series / specifications / 27
Single Zone I SLZ Heat Pump Model Name Rated Capacity Capacity Range Cooling *1
Heating at 47° F *2
Heating at 17° F *3 Power Supply Voltage
Indoor Unit Outdoor Unit
8,400 3,100-10,900 700
920
1,460
15 1.2 0.84
15.4 2.3 0.77
16 4.5 0.67
Rated Capacity
Btu/h
Capacity Range Total Input HSPF (IV) Rated Capacity Rated Total Input Maximum Capacity Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Indoor - Outdoor S2 - S3 MCA Fan Motor
Btu/h W Btu/h/W Btu/h W Btu/h
10,900
13,600
18,000
3,100-14,100 930
3,100-22,000 1,950
280-320-390
0.23
3,100-17,100 1,180 9.6 8,300 930 8,300 1 Phase, 60Hz, 208 / 230V *4 AC 208-230V DC 12-24V 1 0.28
DRY (CFM)
280-320-350
280-320-390
WET (CFM) dB(A)
250-290-320 250-290-350 250-290-350 29-32-38 30-34-39 31-35-40 Galvanized-Steel Sheets; Grille: Munsell 6.4Y 8.9/0.4
A F.L.A.
6,200 740 6,200
W: In.
22-7/16 (25-5/8)
D: In. H: In. Lbs. H: In. In.
22-7/16 (25-5/8) 9-1/4 (13/16) 36 (7) 19-11/16 1-1/4
Type MCA MOCP Fan Motor
Airflow (Cooling/Heating) Refrigerant Control
Dimensions
Connection Method
DC INVERTER-driven Twin Rotary 7.4 9.3 1,243/1,229
DC INVERTER-driven
R.L.A. L.R.A. CFM
6.6 8.2 1,151/1,225
dB(A) dB(A)
46 50
1,229/1,172 Linear Expansion Valve Reverse Cycle 49 51 Munsell No. 3Y 7.8/1.1 31-1/2 11-1/4
W: In. D: In. H: In.
Refrigerant Pipe Length
0.28
12 15 0.50
Defrost Method Sound Pressure Level at Cooling *1 Sound Pressure Level at Heating *2 External Finish Color
10,200 1,310 12,000
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers A A F.L.A. Model (Type)
Compressor
Refrigerant Pipe
15,000 3,800-17,700
SEER Pints/h
Weight Unit (Grille) Drain-lift Mechanism (Included) Field Drainpipe Size O.D.
Refrigerant
11,100 3,400-13,300
W
Dimension Unit (Grille)
Outdoor Unit
SLZ-KA15NA SUZ-KA15NA
Energy Efficiency Moisture Removal Sensible Heat Factor
Sound Pressure Level External Finish
Remote Controller
SLZ-KA12NA SUZ-KA12NA
Total Input
Airflow at Cooling/Heating (Lo-Med-Hi)
Indoor Unit
Btu/h Btu/h
SLZ-KA09NA SUZ-KA09NA
21-5/8
Weight Type Charge Oil Gas Side O.D. Liquid Side O.D.
Lbs.
66
Lbs., Oz. Type (fl. oz.) In. In.
2
Height Difference (Max.)
Ft.
40
Length (Max.) Indoor/Outdoor
Ft.
65 Flared/Flared
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C). *3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C).
28 / MITSUBISHI ELECTRIC / m-series / specifications
77 R410A
80 2, 9
NEO22 (10.8) 3/8
NEO22 (15.2) 1/2 1/4
*4. Indoor units receive power from outdoor units through field-supplied interconnected wiring. Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
Multi-zone MXZ-B Heat Pump Model Name
Outdoor Unit
Cooling *1 Non-ducted/ Ducted Heating at 47° F *2 Non-ducted/ Ducted
Indoor Unit
MXZ-2B20NA-1 *5
MXZ-3B24NA-1 *6
MXZ-3B30NA-1
Rated Capacity
Btu/h
18,000/20,000
22,000/23,600
28,400/27,400
35,400/34,400
Capacity Range Total Input Rated Capacity
Btu/h W Btu/h
7,800-20,000 2,190 (630-2,190) 22,000/22,000
12,600-25,500 2,460 (1,000-2,950) 25,000/24,600
12,600-28,400 3,330 (1,000-3,330) 28,600/27,600
12,600-36,400 3,940 (1,000-4,020) 36,000/34,400
Capacity Range
Btu/h
8,500-25,500
11,400-30,600
11,400-36,000
11,400-43,000
W
2,620 (520-2,620)
1,900 (740-2,600)
2,220 (740-2,820)
3,100 (740-3,940)
Btu/h W Btu/h W Btu/h
12,500/12,500 1,350/1,430 14,500/12,500 1,500/1,430 11,113
A A F.L.A. Model (Type) R.L.A. L.R.A. CFM
15
Total Input Rated Capacity Rated Total Input Maximum Capacity Maximum Total Input Maximum Capacity Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Indoor - Outdoor S2 - S3 MCA MOCP Fan Motor
Heating at 17° F *3 Non-ducted/ Ducted Heating at 5° F Power Supply Voltage
Compressor Airflow (Cooling/Heating) Refrigerant Control
0.96
14,000/14,000 16,000/15,100 1,380/1,570 2,120/2,140 18,800/17,000 18,800/18,000 2,120/2,230 2,120/2,140 13,336 15,704 1-phase, 60Hz, 208 / 230V *8 AC 208 / 230V DC12-24V 18 20 0.93
Sound Pressure Level at Cooling *1 Sound Pressure Level at Heating *2
11 15
14.4
1,485/1,640
2,068/1,605 1,365/1,605 Linear Expansion Valve
2,068/2,068
Reverse Cycle dB(A)
49
dB(A)
51
W: In. D: In. H: In. Lbs.
Weight No. of Units
Indoor Unit Remote Controller
Type Type Charge
Refrigerant
Oil Refrigerant Pipe
Refrigerant Pipe Length
54
Connection Method
33-1/16 13 27-15/16 130 2
5, 15
Ft.
Lineset length for each individual indoor unit (Max.)
Ft.
57
153 2, 3, 4
Associated with the Indoor Unit R410A 7, 11
NEO22 (23.7)
Height Difference (Max.)
54
49
Type (fl. oz.) In. In.
49
Munsell No. 3.0Y 7.8 / 1.1 35-7/16 12-5/8 35-7/16 150 2, 3 2, 3
Lbs., Oz.
Gas Side O.D. Liquid Side O.D.
Length (Max.) Indoor/Outdoor
23 25
DC INVERTER-driven Twin Rotary
External Finish Color Dimensions
22,200/20,300 2,430/2,340 24,600/25,400 3,340/3,450 18,671
10.1
Defrost Method
Outdoor Unit *4
MXZ-4B36NA-1 *7
8, 13
NEO22 (29.4)
A,B: 3/8
A: 1/2; B,C: 3/8 1/4
A: 1/2; B,C,D: 3/8
49/33 *9 82
Ft.
164 (A+B)
230 (A+B+C) Flared/Flared
230 (A+B+C+D)
NOTES: Test conditions are based on AHRI 210/240. One indoor unit is turned off during low-speed testing under the new test conditions. Systems actually exhibit higher energy efficiencies during normal operation. *1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C). *3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C). *4. Refer to pages 12 and 13 for Indoor Unit specifications.
Power factor equals 97%. Specifications are subject to change without notice
*5. Data from combination of two Indoor Units 9,000 Btu/h (non-ducted) or one 9,000 Btu/h and one 12,000 Btu/h (ducted). *6. Data from combination of two Indoor Units 6,000 Btu/h and one 9,000 Btu/h (non-ducted) or three 9,000 Btu/h (ducted). *7. Data from combination of four Indoor Units 9,000 Btu/h (non-ducted and ducted). *8. Indoor units receive power from outdoor units through field-supplied interconnected wiring. *9. 49’ Applies to installations where the outdoor unit is installed below the indoor unit. LIMITED WARRANTY | Seven-year warranty on compressor. Five-year warranty on parts.
Multi-zone Efficiency Ratings Model MXZ-2B20NA-1
MXZ-2B20NA-1 Energy Star®
MXZ-3B24NA-1
Indoor Unit Type
SEER
HSPF
Non-ducted
18
8.9
Ducted and Non-ducted
16.75
8.7
MXZ-3B30NA-1
Indoor Unit Type
SEER
Non-ducted
17.5
HSPF 10.5
Ducted and Non-ducted
16
10.0
Ducted
15.5
8.5
Ducted
14.5
9.5
2 x MSZ-GE09NA-8
18
8.9
Non-ducted
18
9.3
Non-ducted
17.5
9.3
Ducted and Non-ducted
16.25
8.9
Ducted
15.0
8.5
MXZ-3B24NA-1 Energy Star®
2 x MSZ-GE06NA-8 1 x MSZ-GE09NA-8
17.5
9.3
MXZ-3B24NA-1 Energy Star
2 x MSZ-GE06NA-8 1 x MSZ-GE12NA-8
17.5
9.3
®
Model
MXZ-4B36NA-1
MXZ-8B48NA
Ducted and Non-ducted
16.5
9.2
Ducted
15.0
9.0
Non-ducted
15
8.7
Ducted and Non-ducted
14.8
8.8
Ducted
14.7
8.9
MITSUBISHI ELECTRIC / m-series / specifications / 29
Multi-zone MXZ-B Heat Pump Model Name
Outdoor Unit
Cooling *1 Nonducted/Ducted Heating at 47° F *2 Non-ducted/ Ducted
Indoor Unit
Heating at 17° F *3 Non-ducted/ Ducted
Heating at 5° F Power Supply
MXZ-8B48NA
Rated Capacity
Btu/h
Rated Total Input
W
48,000 / 48,000
Maximum Capacity
Btu/h
54,000
Rated Capacity
Btu/h
54,000 / 54,000
Rated Total Input
W
Maximum Capacity
Btu/h
60,000
Rated Capacity
Btu/h
33,000 / 34,700
Rated Total Input
W
Maximum Capacity
Btu/h
Maximum Capacity
Btu/h
5,780 / 6,470
4,820 / 5,270
2,950 / 3,390 36,600 / 36,500 32,400
Phase, Cycle, Voltage
1 Phase, 60Hz, 208 / 230V
Indoor - Outdoor S1 - S2
Voltage
A
Recommended Fuse/Breaker Size
A
50
Type x Quantity
Propeller x 2
Fan Motor
Motor Output (kW)
0.086 + 0.086
Model (Type)
DC INVERTER-driven Scroll
Compressor
Motor Output (kW) CFM
3,530 Linear Expansion Valve
Sound Pressure Level at Cooling *1 dB(A)
54
Sound Pressure Level at Heating *2 dB(A)
55 Munsell No. 3Y 7.8 / 1.1
W: In.
37-7/16
Dimensions
D: In.
13+1-3/16
Weight Total Capacity 22%-130%
H: In. Lbs. Btu/h
53-3/16 278 12,000 - 70,200
Indoor Unit
Total Connected Capacity
Remote Controller
Type
6,000- 24,000 / 2-8 Associated with Indoor Unit Model R410A
Type Charge
Lbs., Oz.
Oil
Type (fl. oz.)
Gas Side O.D.
In.
Liquid Side O.D.
In.
3/8
Height Difference (Max.)
Ft.
66/98 *4
Ft.
230
Ft.
49
Ft.
197*
Ft.
180
Ft.
377
Maximum distance between (Outdoor unit and farthest indoor unit) Maximum pipe length - Branch box to Indoor Unit Total maximum line length between branch box and all connected indoor units Length from outdoor unit to branch box (Max.) Total length (Max.)
Connection Method
Note: Maximum connected capacity is the maximum total of all connected indoor units, NOT the maximum capacity produced.
2.9
External Finish Color
Refrigerant Pipe Length
Specifications are subject to change without notice.
32
Refrigerant Control
Refrigerant Pipe
Power factor equals 97%.
DC12-24V
MCA
Airflow (Cooling/Heating)
Refrigerant
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C). *3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C). *4. 66’ applies to installations when the outdoor unit is installed below the indoor unit.
AC 208-230V
Indoor - Outdoor S2 - S3
Outdoor Unit
NOTES: Test conditions are based on AHRI 210/240. One indoor unit is turned off during low-speed testing under the new test conditions. Systems actually exhibit higher energy efficiencies during normal operation.
18, 11.2 FV50S (73) 5/8
Indoor/Outdoor
Only a single lineset is needed from the outdoor unit to branch box. See page 34 for MXZ-B efficiency information
Branch Boxes: (At least one branch box required)
Flared/Flared
*Includes both branch boxes if there are two.
Model Name
PAC-AKA31BC
Connectable No. of Indoor Units Power Supply
PAC-AKA51BC
3
Phase, Cycle, Voltage
5 1 Phase, 60Hz, 208 / 230V
Power Input
W
3
Current
A
0.05
External Finish Dimensions
Galvanized-Steel Sheets Width
In.
Depth
In.
Height
In.
Net Weight
Lbs.
Refrigerant Pipe Dimensions
17-3/4 11 7-3/4 19
Outdoor Unit to Gas (In.) Branch Box Liquid (In.) Branch Box to Indoor Units
Drainpipe Size (O.D.)
PAC-AKA51BC
21 5/8 3/8
Gas (In.)
A,B,C: 3/8
Liquid (In.)
A,B,C: 1/4
In.
A,B,C,D: 3/8; E: 1/2 A,B,C,D,E: 1/4 3/4
LIMITED WARRANTY | Seven-year warranty on compressor. Five-year warranty on parts.
30 / MITSUBISHI ELECTRIC / m-series / specifications
PAC-AKA31BC
MSZ Wall-mounted Indoor Units (FOR MXZ-B OUTDOOR UNITS) Model Name
Indoor Unit
MSZFE09NA-8
MSZFE12NA-8
MSZ-FE18NA
MSZGE06NA-8
MSZGE09NA-8
MSZGE12NA-8
MSZGE15NA-8
MSZGE18NA-8
MSZ-GE24NA
Cooling *1
Rated Capacity Btu/h
9,000
12,000
18,000
6,000
9,000
12,000
14,000
17,200
22,500
Heating at 47° F *2
Rated Capacity Btu/h
10,900
13,600
21,600
7,200
10,900
14,400
18,000
21,600
27,600
Power Supply
Phase, Cycle, Voltage
Voltage
Fan
1-phase, 60Hz, 208 / 230V *3
Indoor - Outdoor S1 - S2
AC 208 / 230V
Indoor - Outdoor S2 - S3
DC12-24V
MCA
A
1.0
Fan Motor
F.L.A.
0.76
Airflow at Cooling (Quiet-LoMed-Hi-Super Hi or Lo-MedHi-Powerful)*1
DRY (CFM)
162-226339-381
162-226381-410
388-469628-738
145-170-237-321-399
145-170205-272230-275237-321-399 335-420-533 339-420-533
388-469628-738
WET (CFM)
144-202307-343
144-202350-367
347-420562-661
109-134-201-286-364
109-134170-237194-240201-286-364 300-385-498 304-385-498
347-420562-661
Airflow at Heating (Quiet-LoWET Med-Hi-Super (CFM) Hi or Lo-MedHi-Powerful) *2
166-240367-381
166-240399-420
388-469628-738
145-170145-170145-170205-247230-275233-321-406 237-321-406 237-321-406 304-367-463 339-431-512
388-469628-738
Sound Pressure Level at Cooling (Quiet-Lo-Med-Hi-Super Hi or dB(A) Lo-Med-Hi-Powerful) *1
22-31-39-42 22-33-43-45 34-41-49-53
19-22-30-37-43
19-22-3037-45
26-32-3844-49
28-33-3844-49
34-41-49-53
Sound Pressure Level at Heating (Quiet-Lo-Med-Hi-Super Hi or dB(A) Lo-Med-Hi-Powerful) *2
22-31-40-42 22-23-43-44 32-41-49-52
19-22-30-37-43
19-22-3037-43
26-30-3540-46
28-33-3843-49
32-41-49-52
External Finish Color
Dimension Unit
Munsell No. 1.0Y 9.2 / 0.2 W: In.
31-3/8
43-5/16
31-7/16
43-5/16
D: In.
10-1/8
9-3/8
9-1/8
9-3/8
H: In.
11-5/8
12-13/16
11-5/8
12-13/16
Weight Unit
Lbs.
27
37
22
37
Field Drainpipe Size O.D.
In.
5/8
Remote Controller
Type
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
Refrigerant
Type
R410A
Refrigerant Pipe Connection Method
Gas Side O.D.
In.
3/8
5/8
Liquid Side O.D. In.
1/4
8
Indoor/Outdoor
NOTES: Test conditions are based on AHRI 210/240. *1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C). *2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C). *3. Indoor units receive power from outdoor units through field-supplied wiring.
3/8
1/2 1/4
5/8 3/8
Flared/Flared Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts. For data on specific indoor unit combinations, see page 16 - combination tag
MITSUBISHI ELECTRIC / m-series / 31
MITSUBISHI ELECTRIC / m-series / specifications / 31
SEZ Horizontal-ducted Indoor Unit (FOR MXZ-B OUTDOOR UNITS)
SEZ-KD09NA4
SEZ-KD12NA4
SEZ-KD15NA4
SEZ-KD18NA4
Cooling *1
Model Name Rated Capacity
Btu/h
8,100
11,500
14,100
17,200
Heating at 47˚ F *2
Rated Capacity
Btu/h
10,900
13,600
18,000
21,600
Power Supply
Indoor Unit
Phase, Cycle, Voltage
1-Phase, 60Hz, 208 / 230V *4
Indoor - Outdoor S1-S2 Voltage
Fan
AC 208-230V DC12-24V
Indoor - Outdoor S2-S3 MCA
A
1.0
Fan Motor Output
W
96
Airflow at Cooling/Heating (Lo-Med-Hi)
CFM
External Static Pressure *3
In. W.G.
Sound Pressure Levels (Lo-Med-Hi)
194-247-317
dB(A)
247-317-388
353-441-529
0.02-0.06-0.14-0.20 23-26-30
23-28-33
External Finish
30-34-37
Dimension
31-1/8
39
D: In.
27-9/16
H: In.
7-7/8
Weight
Lbs.
Drain-lift Mechanism (Included)
H: In.
21-11/16
Field Drainpipe Size O.D.
In.
1-1/4
Refrigerant Refrigerant Pipe
30-34-38
Galvanized-steel Sheets W: In.
Remote Controller
423-529-635
Type
42
50
Liquid Side O.D.
54
62
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers
Type Gas Side O.D.
46-7/8
R410A In.
3/8
1/2 1/4
Connection Method
Flared/Flared
Connection Method
Flared/Flared
Notes: *1. Cooling-Indoor: D.B. 80º F (26.7º C), W.B. 67º F (19.4º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (23.9º C). *2. Heating-Indoor: D.B. 70º F (21.1º C), W.B. 60º F (15.6º C); Outdoor: D.B. 47º F (8.3º C), W.B. 43º F (6.1º C). *3. External static pressure is factory set to 0.06" W.G. Adjustable via the PAR-21MAA. *4. Indoor units receive power from outdoor units through field supplied interconnected wiring. Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts. **For data on specific indoor unit combinations, see pages 14-17 and 29-30. - Reference page 27 for SEZ static performance curves.
32 / MITSUBISHI ELECTRIC / m-series / specifications
MFZ Floor-mounted Indoor Unit (FOR MXZ-B OUTDOOR UNITS)
Model Name
Indoor Unit
MFZ-KA09NA
MFZ-KA12NA
MFZ-KA18NA
Cooling *1
Rated Capacity
Btu/h
9,000
12,000
18,000
Heating at 47° F *2
Rated Capacity
Btu/h
10,900
14,400
21,600
Power Supply
Phase, Cycle, Voltage
Voltage
1-phase, 60Hz, 208 / 230V *3
Indoor - Outdoor S1 - S2
AC 208 / 230V
Indoor - Outdoor S2 - S3
DC12-24V
MCA
A
1
DRY (CFM)
169-205-251-314
177-215-261-321
251-279-325-394
WET (CFM)
163-197-241-303
170-207-252-309
241-269-313-379
(CFM)
177-198-219-332
184-201-219-335
261-275-297-434
Sound Pressure Level at Cooling (Lo-Med-Hi-Super Hi) *1
dB(A)
25-30-35-40
26-31-36-41
35-38-42-46
Sound Pressure Level at Heating (Lo-Med-Hi-Super Hi) *2
dB(A)
25-30-35-40
28-31-36-41
35-38-42-47
Airflow at Cooling/Heating (Lo-Med-Hi)
Fan
Airflow at Heating (Lo-Med-Hi-Super Hi) *2
External Finish Color
Munsell No. 1.0Y 9.2/0.2
Dimension Unit
Weight Unit Field Drainpipe Size O.D.
W: In.
27-9/16
D: In.
7-7/8
H: In.
23-5/8
Lbs.
32
In.
5/8
Remote Controller
Type
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller or PAR-21MA Wired Wall-mounted Remote Controller with MAC-397IF Control Adapter)
Refrigerant
Type
R410A
Gas Side O.D.
In.
Liquid Side O.D.
In.
3/8
1/2
Refrigerant Pipe
Connection Method
1/4
Indoor/Outdoor
Flared/Flared
Notes *1. Cooling-Indoor: D.B. 80º F (26.7º C), W.B. 67º F (19.4º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (23.9º C). *2. Heating-Indoor: D.B. 70º F (21.1º C), W.B. 60º F (15.6º C); Outdoor: D.B. 47º F (8.3º C), W.B. 43º F (6.1º C). *3. Indoor units receive power from outdoor units through field supplied interconnected wiring. Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts. Presently there is no 1:1 system with the MFZ indoor unit.
MITSUBISHI ELECTRIC / m-series / specifications / 33
SLZ Ceiling-recessed Indoor Unit (FOR MXZ-B OUTDOOR UNITS) Model Name
Indoor Unit
SLZ-KA09NA
SLZ-KA12NA
SLZ-KA15NA
Cooling *1
Rated Capacity
Btu/h
8,400
11,100
15,000
Heating at 47° F *2
Rated Capacity
Btu/h
10,900
13,600
18,000
Power Supply
Phase, Cycle, Voltage
Voltage
1-phase, 60Hz, 208 / 230V *3
Indoor - Outdoor S1 - S2
AC 208 / 230V
Indoor - Outdoor S2 - S3
DC12-24V
MCA Fan Motor
A
1
F.L.A.
0.23
0.28
0.28
DRY (CFM)
280-320-350
280-320-390
280-320-390
WET (CFM)
250-290-320
250-290-350
250-290-350
Sound Pressure Level (Lo-Med-Hi) *2
dB(A)
29-32-38
30-34-39
31-35-40
External Finish Color
Unit/Grille
Galvanized-steel Sheets/Munsell 6.4Y 8.9 / 0.4
W: In.
22-7/16 (25-5/8)
D: In.
22-7/16 (25-5/8)
H: In.
9-1/4 (13/16)
Weight Unit (Grille)
Lbs.
36 (7)
Drain-lift Mechanism (Included)
H: In.
19-11/16
Field Drainpipe Size O.D.
In.
1-1/4
Type
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers
Fan
Airflow at Cooling/ Heating (Lo-Med-Hi)
Dimension Unit (Grille)
Remote Controller
Refrigerant
Refrigerant Pipe
Type
R410
Gas Side O.D.
In.
Liquid Side O.D.
In.
3/8
1/2 1/4
Connection Method
Indoor/Outdoor
Flared/Flared
Connection Method
Indoor/Outdoor
Flared/Flared
Notes: *1. Cooling-Indoor: D.B. 80º F (26.7º C), W.B. 67º F (19.4º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (23.9º C). *2. Heating-Indoor: D.B. 70º F (21.1º C), W.B. 60º F (15.6º C); Outdoor: D.B. 47º F (8.3º C), W.B. 43º F (6.1º C). *3. Indoor units receive power from outdoor units through field supplied interconnected wiring.
34 / MITSUBISHI ELECTRIC / m-series / specifications
Specifications are subject to change without notice. LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
Additional M-Series Information M-Series operATING CONDITIONS
REFRIGERANT LINE LENGTH FLARE/FLARE
Indoor Intake Air Temperature Maximum Cooling Minimum
Maximum
Outdoor Intake Air Temperature
95°F D.B., 71°F W.B. (MU; SUZ; MXZ-2B20,3B24,3B30,4B36-1) 90°F D.B., 73°F W.B. (MUZ/Y-GE; MUZ-FE; MUZ/Y-D)
115°F D.B. (MU; MUZ/Y-GE; MUZ/Y-D; MUZ-FE; SUZ; MXZ-2B20/3B24/3B30/4B361,8B48)
67°F D.B., 57°F W.B. (MU; MUZ/YGE; MUZ/Y-D; MUZ-FE; SUZ; MXZ-2B20/3B24/3B30/4B36-1)
14°F D.B. (MUZ/Y-GE; MUZ/Y-D; MUZ-FE; SUZ; MXZ-2B20/3B24/3B30/4B36-1) 23°F D.B. (MXZ-8B48) 67°F D.B. (MU)
80°F D.B., 67°F W.B. (MU; MUZ/YGE; MUZ/Y-D; MUZ-FE; SUZ; MXZ-2B20/3B24/3B30/4B36-1)
Heating Minimum
Indoor Unit
70°F D.B., 60°F W.B. (MUZ-GE; MUZ-D; MUZ-FE; SUZ; MXZ-2B20/3B24/3B30/4B36-1)
75°F D.B., 65°F W.B. (MUZ/Y-GE; MUZ/Y-D; MUZ-FE; SUZ; MXZ-B20/3B24/3B30/4B36-1) 70°F D.B. (MXZ-8B48) -13°F D.B., -15°F W.B. (MUZ-FE)-4°F D.B., -5°F W.B. (SUZ; MUZ-GE)5°F D.B., 4°F W.B. (MXZ-8B48NA) 6°F D.B., 5°F W.B. (MXZ2B20/3B24/ 3B30/4B36-1)14°F D.B., 13°F W.B. (MUZ/Y-D)
Outdoor Unit
Length in Height feet in feet
MS-A09WA
MU-A09WA
65
35
MS-A12WA
MU-A12WA
65
35
MSY-GE09NA-8
MUY-GE09NA
65
40
MSY-GE12NA-8
MUY-GE12NA
65
40
MSY-GE15NA-8
MUY-GE15NA-1
65
40
MSY-GE18NA-8
MUY-GE18NA-1
100
50
MSZ-GE09NA-8
MUZ-GE09NA
65
40
MSZ-GE12NA-8
MUZ-GE12NA
65
40
MSZ-GE15NA-8
MUZ-GE15NA-1
65
40
MSZ-GE18NA-8
MUZ-GE18NA-1
100
50
MSY-GE24NA
MUY-GE24NA
100
50
MSZ-GE24NA
MUZ-GE24NA
100
50
* MU units operate at intake air temperature down to 10º F with the addition of an ICM-326HM-1 low temperature control.
MSY-D30NA-8
MUY-D30NA-1
100
50
M-Series systems are not suitable for critical room and low ambient cooling applications. Use commercial grade P-Series with full cooling capacity down to 0o F with wind baffle.
MSZ-D30NA-8
MUZ-D30NA-1
100
50
MSY-D36NA-8
MUY-D36NA-1
100
50
MSZ-D36NA-8
MUZ-D36NA-1
100
50
MSZ-FE09NA-8
MUZ-FE09NA-1
65
40
MSZ-FE12NA-8
MUZ-FE12NA1
65
40
MSZ-FE18NA
MUZ-FE18NA
100
50
SEZ-KD09NA4
SUZ-KA09NA
65
40
SEZ-KD12NA4
SUZ-KA12NA
65
40
SEZ-KD15NA4
SUZ-KA15NA
65
40
SEZ-KD18NA4
SUZ-KA18NA
100
50
SLZ-KA09NA
SUZ-KA09NA
65
40
SLZ-KA12NA
SUZ-KA12NA
65
40
SLZ-KA15NA
SUZ-KA15NA
65
40
MSZ-GE/FE; MFZ ; SEZ ; SLZ
MXZ-2B20NA-1
164
49*/33
MSZ-GE/FE; MFZ ; SEZ ; SLZ
MXZ-3B24NA-1
230
49*/33
MSZ-GE/FE ; MFZ; SEZ ; SLZ
MXZ-3B30NA-1
230
49*/33
MSZ-GE/FE ; MFZ; SEZ ; SLZ
MXZ-4B36NA-1
230
49*/33
MSZ-GE/FE ; MFZ; SEZ ; SLZ
MXZ-8B48NA
377
66*/98
REFRIGERANT LINESETS Lineset Model Number
Tube Size (In.)
Length Ft.
Insul.
MLS143812T-15
1/4 x 3/8
15
1/2"
MLS143812T-30
1/4 x 3/8
30
1/2"
MLS143812T-50
1/4 x 3/8
50
1/2"
MLS143812T-65
1/4 x 3/8
65
1/2"
MLS141212T-15
1/4 x 1/2
15
1/2"
MLS141212T-30
1/4 x 1/2
30
1/2"
MLS141212T-50
1/4 x 1/2
50
1/2"
MLS141212T-65
1/4 x 1/2
65
1/2"
MLS141212T-100
1/4 x 1/2
100
1/2"
MPLS385812T-10
3/8 x 5/8
10
1/2"
MPLS385812T-15
3/8 x 5/8
15
1/2"
MPLS385812T-30
3/8 x 5/8
30
1/2"
MPLS385812T-50
3/8 x 5/8
50
1/2"
MPLS385812T-65
3/8 x 5/8
65
1/2"
MPLS385812T-100
3/8 x 5/8
100
1/2"
Use With Mitsubishi Electric Models MS-A09WA; MSZ-GE06NA-8; MSY/ZGE09,12NA-8; MSZ-FE09,12NA-8; SEZ-KD09,12NA4; MFZ-KA09,12NA SLZ-KA09, 12NA
MS-A12WA; MSY/Z-GE15,18NA-8; SEZ-KD15,18NA4; MFZ-KA18NA; SLZ-KA15NA
MSY/Z-GE24NA; MSY/Z-D30,36NA-8; MXZ-8B48NA; MSZ-FE18NA
*49’ & 66’ applies to installations where the outdoor unit is installed below the indoor unit.
For a complete list of the Optional accessoriess, scan the tag to the right, or visit http:// extranet.mehvac. com/uploadedfiles/ optional accessories.pdf
MITSUBISHI ELECTRIC / m-series / specifications / 35
Mitsubishi Electric Cooling & Heating 3400 Lawrenceville Suwanee Road, Suwanee, GA 30024 Phone: 888-467-7546 Fax: 800-658-1458 /mehvac
/mitsubishihvac
/mitsubishihvac
Mitsubishi Electric, H2i and the three diamond logo are registered trademarks of Mitsubishi Electric Corporation. *Hyper-heating technology is a pending patent of Mitsubishi Electric Corporation. RedLINK and RedLINK wireless technology logos are registered trademarks of Honeywell International. See complete warranty for terms, conditions and limitations. A copy is available from Mitsubishi Electric. MSCG_5.12 60k OA For more information visit www.mehvac.com
I
Printed In The U.S.A
Please Recycle