Master's Thesis & in the Text of Books. ************** ... CO2 laser welding of copper slabs - Optics & Laser Technology , Volume 17, Issue 5, October. 1985 ...
G. Daurelio – CITED in the AKNOLEDGEMENTS of Papers – Monographs - Doctoral Thesis - Degree Thesis Master's Thesis & in the Text of Books ************** 1 - I.M. Catalano, A. Cingolani, A. Minafra Multiphoton impurity luminescence in zinc sulphide - Optics Communications - Volume 7, Issue 3, March 1973, Pages 270–271. AKNOLEDGEMENTS : The Authors are very gratefull do Professor F. Ferrero for his interest in this work and to Professor F. Bassani for useful discussions . The assistance of G. Daurelio in the experiments was particularly valuable. 2 - I. M. Catalano, A. Cingolani, and A, Minafra Spontaneous and Stimulated Luminescence in CdS and ZnS Excited by Multiphoton Optical Pumping- PHYSICAL REVIEW B - VOLUME 8, NUMBER 4 - 15 AUGUST 1973- (Received 12 February 1973) ACKNOWLEDGMENTS : We are very grateful to Professor Bassani for useful discussions, to Professor Ferrero for his interest and to Professor Manfredotti for sample preparation. The assistance of G. Daurelio in the experiment was particularly valuable. 3 – F. Adduci, M. Ferrara, P. Tantalo, A, Cingolani, A. Minafra Photoelectric Properties of GaSe – Physics Status Solidi (A ) – 15, 303, (1973 ) , pp. 303 to 310 ACKNOWLEDGMENTS : The assistance of G. Daurelio in the experiments was particularly valuable. 4 – A. Alto, R. Calia Sulle Prove di J – Integral per la Misura della Tenacità a Frattura dei Materiali - La Meccanica Italiana , Giugno 1979, n. 130, pp. 45 to 50 . ACKNOWLEDGMENTS : We are gratefull to Mr. G. Daurelio for his help and assistance during the experiments and tests . 5- M. Dell'Erba CO2 laser welding of copper slabs - Optics & Laser Technology , Volume 17, Issue 5, October 1985, Pages 260–261. ACKNOWLEDGEMENTS : The author would like to thank Dr L. Cento and Mr G. Daurelio for their valuable help. Thanks are also due to Dr.ssa 0. De Pascale for her contribution to ... 6- Galantucci, L. M., F. Giusti, Excimer laser cutting: experimental characterization and 3D numerical modelling for polyester resins - CIRP Annals-Manufacturing Technology, 47(1), 141-144, (1998) ACKNOWLEDGEMENTS :The author would like to express his thank to Dr. Giovanni De Luca, for his helpful collaboration and work in the experiments, and to Mr G. Daurelio and the Centro Laser in Valenzano ( BA-Italy ) for the tests. 7 - Giuseppe Casalino , L.A.C. De Filippis , A. D. Ludovico AISI 304 Laser Prototyping by Different Techniques – Conf. Proceed. of High-Power Lasers in Manufacturing- Osaka ( Japan ) , November 01 , 1999 – SPIE Vol. 3888 (USA ) , February 7, 2000, pag. 236 , doi : 10.1117/12.377025
ACKNOWLEDGEMENTS : The Authors wish to thank Mr. Giuseppe Chita and Mr. G. Daurelio ( CENTRO LASER di Valenzano – 70100 Bari – Italy ) for their collaboration during experimental tests. 8 - Sciti, D., Melandri, C., A. Bellosi Excimer laser-induced microstructural changes of alumina and silicon carbide. Journal of materials science, 35(15), 3799-3810, (2000) ACKNOWLEDGEMENTS : The authors wish to thank G. Daurelio (Centro Laser, Valenzano, Bari) for laser processing of the materials concerned in this work. 9 - D. Sciti , A. Bellosi Laser-Induced Surface Drilling of Silicon Carbide – published by Applied Surface Science , Vol. 180, issues 1-2, 01 August 2001, pages 92 to 101, dx.doi.org./10.1016/S0169-4332(01)00330-0. ACKNOWLEDGEMENTS : The Authors would like to thank Mr . G. Daurelio ( CENTRO LASER di Valenzano – Bari – Italy ) for the laser machining tests . 10 - G. Casalino, F. Curcio, F. Memola Capece Minutolo Investigation on Ti6Al4V Laser Welding using Statistical and Taguchi Approaches - published by Journal of Materials Processing Technology , Vol. 167, issues 2-3 , 30 August 2005 , pages 422 to 428 , dx.doi.org/ 10.1016/j.matprotec.2005.05.031 , for 2005 International Forum on the Advances in Materials Processing Technology . ACKNOWLEDGEMENTS : The Welding Department of the Silesian University of Technology in Gliwice ( Poland ) , is Acknowledged, for operating the diode welds. Senior Researcher G. Daurelio is also greatly Acknowledged for his collaboration during the CO2 welding trials . 11 - Carbucicchio M. , Palombarini G. , Ciprian R. , Tosto S. , Rateo M. , Sambogna G. Interfacial Microstructure and Properties of Dissimilar Steels Joined by High Energy Beam Melting Processes - Proceedings of the International Symposium on the Industrial Applications of the Mössbauer Effect (ISIAME 2008) held in Budapest, Hungary, 17–22 August 2008pages , pages 473 to 480 , by Springer Heidelberg – Berlin , doi 10.1007/978-3-642-01370-6_63 , ISBN 978-3-642-01369-0 AKNOLEDGEMENTS : The Authors wish to thank G. Daurelio , CENTRO LASER, Valenzano ( Bari ) , Italy , for providing welded samples and Dr. Fabrizio Tarterini, University of Bologna, Italy , for performing EDS measurements. 12 – C.N.R. – Consiglio Nazionale delle Ricerche – Rome – Italy Laser di Potenza : Applicazioni Meccaniche - Monografie Scientifiche – Serie Matematica e Fisica BOOK - Edited and published by CNR – 1991 G. Daurelio , CITED in the Text : * on pages 91 to 115 ( processi di Taglio Laser ** on pages 115 to 116 ( Bibliography ) ° on pages 135 to 175 and 136 to 143 ( figs. 1 to 4 ) – pages 149 to 153 ( figs. 14 – 15 and 16 to 22 ) – page 155 ( figs. 26 – 27 ) ( for Processi di Saldatura di Metalli con Laser ) – pages 174 – 175 ( Bibliography ) °° pages 333 to 346 ( fig. 15 a ) – 364 to 365 ( figs. 31 – 32a – 32 b ) ( for Lavorazioni Meccaniche con Sorgenti Laser a Nd – YAG di Elevata Potenza ) . 13 – M. Cucchi , S. Valenti LASER & Produzione Industriale BOOK – edited by the same Authors and Published by Editrice IL ROSTRO – Milan – Italy 1991
G. Daurelio , CITED in the TEXT on pages 74 to 76 ( text and figs. 3.10 – 3.11 and 3.12 ) – 167 ( Bibliography ) 14 – S. Palese La tradizione Barese di S. Sabino di Canosa BOOK – edited by the same Author and Published by EDIPUGLIA – Bari– Italy 2001 G. Daurelio , CITED in the Text : Pages. 9 – 17 – 18 – 19 and 20 ( Mr. G. Daurelio as the Author that found, after 509 years of Research, prior the Bone Relics ( Remains ) of the Saint S. Sabino , on 25 March 1994, by using electro-optical technologies, micro-probe endoscope micro-camera as well as an optical fibre with joy- stick, manageable and adjustable from the outside by an Operator ( for the 1st time on the world , this technique was applied in the field of Non – Destructive (ND) investigations, applied to Restoring and Monitoring of Archeological – Monumental sites ) . 15 – John C. ION LASER PROCESSING of Engineering Materials BOOK – edited by the same Author and Published by ELSEVIER BUTTERWORTH – HEINMANN - 2005 G. Daurelio , CITED in the Text : pages 334 – 335 ( Tabs. 13.1 ) – 345 ( Bibliography ) – 368 ( Text and Tab. 14.11 ) – 381 ( Bibliography ) – 449 ( Bibliography ) 16 – A. Giovagnoli IL LASER – Pulitura su Materiali di Interesse Artistico BOOK – edited by the same Author and Published by NARDINI Editor - Florence - 2009 G. Daurelio , CITED in the Bibliography on page 17 .
N.B. – Footnote – This Contribution IS IN CONTINUE PROGRESS .
