ZX12-R. Issue. 06/00 – rev. 00. Recommended siting. Behind the right fairing,
under the seat. Power supply. Connect the positive and the negative supply wires
...
Motorcycle Manufacturer Model Issue
ZX12-R 06/00 – rev. 00
Recommended siting
Behind the right fairing, under the seat.
Power supply
Connect the positive and the negative supply wires of the alarm system directly to the positive and the negative terminals of the battery.
Engine immobilisation (1)
Follow Diagram B. Cut the RED wire available in the brown 4-way connector on the fuel pump relay. This relay is placed under the plastic cover of the fuel tank, on the front side.
Engine immobilisation (2)
Cut the YELLOW/RED wire available in the white 8way connector found behind the metal cover, inside the battery compartment.
Ignition controlled positive supply
Connect to the RED/WHITE wire available in the white 2-way connector of the rear stop light switch, under the fuel tank.
Turn indicators
Connect to the GREEN wire and to the GREY wire available in the black and in the grey 2-way connectors, placed on the right of the glove compartment under the seat.
The information contained herein is merely indicative and without responsibility on SPYBALL. You are strongly recommended to check for possible discrepancies or for changes made by the motorcycle manufacturer prior to connecting. COBRA AUTOMOTIVE TECHNOLOGIES SPA - SPYBALL BUSINESS UNIT - VIA ASTICO 41 – 21100 VARESE (VA) www.spyball.it
[email protected]
