new products

8 downloads 15 Views 3MB Size Report
Obsolete/Replacement Products. Pg. 8. A ship building and repairing company in Thailand embarked on .... Application: Mazda B2300 with Ford 4 cyl. 2.3L F.I. ...

OCTOBER 2008

South East Asia & South Asia

ANNOUNCEMENT Cummins Filtration International Corp. 8 Tanjong Penjuru, Singapore 609019 Tel : (65) 6266 3833 Fax : (65) 6265 6909

Shipbuilders in Thailand - Protected by Fleetguard

For enquiries please contact : [email protected]

Inside This Issue : Announcement : Shipbuilders in Thailand - Protected by Fleetguard Pg. 1

Technical Flash: Spin-on Filter Applications Pg. 3

Products Updates : New Products Pg. 5

Obsolete/Replacement Products Pg. 8

A ship building and repairing company in Thailand embarked on a huge project that involved building more than 10 units of crew boats which operated in offshore oil rigs. Three units of Cummins KTA 50 and two units of KTA38 engine was used to power the generators of each vessel.

Newsletter Updates: For free Newsletter updates, follow onto the link below. http://www.cumminsfiltration.com/ en/product_literature/ en_lit_asia.shtml#newsletters

Mr. Khun Buncha, service manager of Cummins Diethelm Limited (CDL), is responsible for providing engineering expertise for the crew for both operational and maintenance requirement. In addition, the features and benefits of a Fully Formulated Coolant as warranted by Cummins, such as the ES Compleat, was introduced and discussed into detail in how it could prolong life of engine.

“ES Compleat is a Fully Formulated Coolant that provides superior engine protection, extends service intervals and simplifies any maintenance program.”

Included in the discussion were the benefits and serviceability of the ES Compleat Coolant. It is a Fully Formulated Coolant that provides superior engine protection, extends service interval and simplifies any maintenance program. It is compatible with gaskets, elastomers and other non-metallics in the engine. Not only does it optimizes cooling system performance, it also provides antifreeze and antiboil protection. Because of its remarkable performance and versatility, the ES Compleat received positive feedbacks from the maintenance engineers; as they mentioned that it is very convenient to use and there is no need to be concerned about coolant contamination. ■

2

TECHNICAL FLASH

Spin-on Filter Applications

Spin-on filters are still the most popular design for liquid filtration on internal combustion engines. The spin-on design offers an efficient, quick and clean method for servicing liquid filters. The spinon is by far the preferred method of filter design on automobile and mobile heavy duty equipment. Over the years, a proliferation of filter sizes has evolved. These include length, diameter, sealing gasket diameter and thread size variation. The internal design of spin-on filters also vary. Some designs utilize internal by-pass valves and/or antidrain back valves. Filtration media used in different models also vary depending on different service and engine requirements. Operating pressure requirements can also differ from model to model.

“The spin-on design offers an efficient, quick and clean method for servicing liquid filters.” With all the different spin-on filter models available in the market today, the user must use extreme caution not to use a wrong filter for his/ her particular application. There are filters that look alike and may even fit different engine mounting bases with the same thread size. However, this does not constitute and guarantee that the correct filter is being used. Misapplication problems could be very serious. Wrong thread size is one of the common mistakes. Failure to use the recommended filter with the correct thread size could result in improper mating of the filter to mounting base. A loose thread fit may cause a leak, backoff, fatigue failure or loss of filter. Any of these cases can cause engine damage or fire. A "tight" thread fit can cause leakage, thread seizure or cross 3

TECHNICAL FLASH (cont’d) threading, resulting in damage to the engine mounting base and filter. A multitude of thread sizes are used in spin-on filters. Both metric and United National threads are widely used. Some of the metric and United National threads are close in size to the U.S. threads and a spin-on filter may "fit" a mounting base and yet have a different thread than the base. The Society of Automotive Engineers (SAE) has published a Recommended Practice that identifies dimensional characteristics and mounting configurations of filter base mountings. This Recommended Practice, SAE J-363 lists the thread sizes of the more commonly used spin-on filters and their recommended application. Other considerations of mis-application include getting the wrong combination of by-pass settings, anti -drain back valves, filterability characteristics, operating pressure, sealing gasket diameter, interference and by-pass valve elimination. Failure to use the filter recommended by the filter manufacturer could interfere with proper engine protection. Filter design and application is a complex process requiring the proper order of components. Don't take the chance of altering this order which could result in equipment damage or hazardous operation. The key to eliminating these problems is application. Be sure that the source of recommended application is a correct one. Filter manufacturers catalog application recommendations should be followed. When it comes to choosing the correct filter, one can't rely on cross-reference, "fit" or "feel". Be sure that the spin-on filter application is correct. ■

4

PRODUCT UPDATES NEW PRODUCTS As of September 2008 AIR FILTERS AF26458

Description: Panel, Primary, Cellulose Media Application: Light Truck and Auto Applications Cross: GMC 88986533, AC CF127, Baldwin PA4169, Hastings AF1231, Napa 4814, Wix 24814 Length: 9.05 in. Width: 5.12 in. Height: 0.93 in. Carton Quantity: 1 Carton Weight: 0.80 lbs.

AF26459

Description: Panel, Primary, Cellulose Media Application: Light Truck and Auto Applications Cross: GMC 52485513, AC CF104, Baldwin PA4149, Champ CAF1707, Fram CF8791, Hastings AF1114, Purolator C15388, Wix 24805 Length: 9.05 in. Width: 5.11 in. Height: 0.93 in. Carton Quantity: 1 Carton Weight: 0.80 lbs.

AF26462

Description: Panel, Primary, Cellulose Media Application: 2007 Sprinter Vans with Mercedes 3.0L V6 Engines Cross: Mopar 680128766AA Length: 13.83 in. Width: 9.21 in. Height: 1.38 in. Carton Quantity: 6 Carton Weight: 2.0 lbs.

COOLANT CC8983

Description: ES Complete EG Premix Disposable Tote Carton Quantity: 1 Carton Weight: 2700.00 lbs.

CC8984

Description: ES Complete EG Concentrate Disposable Tote Carton Quantity: 1 Carton Weight: 2800.00 lbs.

5

FUEL FILTERS FF5700

Description: In-line, Outside/In, Primary Application: Mazda B2300 with Ford 4 cyl. 2.3L F.I. Engines Cross: Ford 2L5Z9155A, Mazda 1F2013470, Baldwin BF7710, BF7765, Luberfiner G1033, Wix 33409 OD: 2.0 in. Height: 6.38 in. Connection In/Out: .433 in. Carton Quantity: 12 Carton Weight: 8.0 lbs.

FF5703

Description: In-line, Outside/In, Primary Application: Lexus, Toyota Vehicles Cross: Toyota 2330020040, Baldwin BF7661, Donaldson P552434, Fram G8207, Hastings GF311, Napa 3581, Purolator F55287, Wix 33581 OD: 2.56 in. Height: 4.17 in. Connection In/Out: M14 x 1.5-6H Carton Quantity: 12 Carton Weight: 5.52 lbs.

FF5704

Description: In-line, Outside/In, Primary Application: Nissan On-highway Vehicles Cross: Nissan 1640072L10, 164009E000, Baldwin BF7660, Luberfiner G6351, Napa 3477, Wix 33477 OD: 2.44 in. Height: 4.88 in. Connection In/Out: .374 in. Carton Quantity: 12 Carton Weight: 4.44 lbs.

FF5705

Description: In-line, Outside/In, Primary Application: Mercedes On-highway Vehicles Cross: Mercedes 14772101, AC GF501, Atlas Copco 29148002, Baldwin BF7725, Hastings GF160, Hatz 50317000, Hengst H102WK, John Deere AL78988, Mahle K230F, Napa 3007, SF Filter SB2775, Wix 33007 OD: 1.38 in. Height: 4.05 in. Connection In/Out: .32 in. Carton Quantity: 12 Carton Weight: .80 lbs.

FS19902

Description: Spin-on, Outside/In, Fluid Conditioning Application: Pre-filter for Cummins QSB 3.3 Cross: Cummins 4992119 OD: 3.72 in. Height: 7.13 in. Threads: M24 x 1.5-6H INT Carton Quantity: 12 Carton Weight: 12.0 lbs.

6

LUBE FILTERS LF16245

Description: Spin-on, Outside/In, Full Flow Application: MTU Construction 12V2000, 12V4000, 16V2000, 16V4000, 18V2000 Cross: MTU 0031845301, AC XD34, Baldwin B7180, Hastings LF369, Hengst H17WK01, Knecht AW22, Kralinator F59, Mann & Hummel WD131454, Purolator PC47, Wix 57012 OD: 5.35 in. Height: 11.89 in. Threads: 1 ½-16 UN-2B Carton Quantity: 6 Carton Weight: 6.0 lbs.

TRANSMISSION FILTERS TF15082

Description: Panel, Outside/In, Full Flow Application: Allison Transmissions 1000, 2000 Series Cross: Allison 29537966, Allomatic 5483, Baldwin 20003, Hastings TF182 Length: 9.48 in. Width: 6.42 in. Height: 5.13 in. Carton Quantity: 6 Carton Weight: 7.0 lbs.

MAINTENANCE KITS Cummins Applications MK13195 Includes: LF9001(1), FS19728(1), FF2200(1) Carton Quantity: 1 Carton Weight: 6.55 lbs. MK13196

Includes: LF9001(1), FF2200(1), FF2203(1), WF2127(1) Carton Quantity: 1 Carton Weight: 8.49 lbs.

MK13197

Includes: LF3000(1), FF5636(1), FS1003(1) Carton Quantity: 1 Carton Weight: 7.26 lbs.

7

PRODUCT UPDATES OBSOLETE / REPLACEMENT