NGDC Origami Balloon

22 downloads 6671 Views 2MB Size Report
Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply itsĀ ...
CE

IC A

NATIONAL O CE A

D

EP AR

R

S.

E

ER

D ATMOSPHER AN IC

STRATION

DEP AR

C

U.

IT

M ST AT E S O F A

NI

NI MI AD

UN D

NGDC Origami Balloon

CE ER

OF CO ENT MM TM

TME

O N T OF C

MM

E

NOAA Satellite and Information Services National Geophysical Data Center see more at http://www.ngdc.noaa.gov/

The curiously-shattered image of the globe (left) can be folded into an origami balloon (some assembly required -- see below) that reassembles the map. The image is a composite from ETOPO2 topography and bathymetry overlaid with nighttime lights from DMSP. Print this page as big as you can, cut out the entire map square, and strike a blow for world pieces. 2

1

Start with a square of paper face-down 5

3

Crease it along the other diagonal and the midline

Crease it diagonally 6

Fold one point up 9

7

Fold all four points this way 10

Fold down one of the free points

Fold one of the free corners to meet the center 11

Open up the pocket on the left; curl the point into the pocket

Fold and tuck all four points this way

4

Squash it into a flat triangle

8

Fold all four free corners this way 12

Open up the shape and find the open end

Origami Balloon Projection and instructions courtesy Flaming Pear Software http://www.flamingpear.com

Finally -Hold it by the edges and blow sharply into the hole. The balloon will inflate.

Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government, and shall not be used for advertising or product endorsement purposes.