Nzi Trap Sewing Instructions

Download PDF
4 downloads 0 Views 45KB Size Report
Comment
Jan 1, 2007 - Mark the centre of the black side walls. Fold back the netting shelf from the front and attach each side to the black walls ...
Nzi Trap Sewing Instructions Steve Mihok January 1, 2007 More detailed explanations are in Power Point “Notes”

Cut Out Two Wings Fold back edges Sew down 2.5 cm to make sleeves for bamboo poles

Cut Out Two Side Walls Attach the black sides to the inside long edge of the blue wings

Cut Out Top Front Shelf Fold back black sides, attach shelf to upper half of blue wings

Cut Out Horizontal Shelf Trim the corners to produce a 42 cm high trapezoid with sides of 100 & 50 cm 25 cm

25 cm 50 cm

X

X ~ 42 cm

100 cm

Attach Shelf to Front Working from the front of the trap, attach the netting shelf to the bottom edge of the front blue shelf

Attach Shelf to Sides Mark the centre of the black side walls Fold back the netting shelf from the front and attach each side to the black walls

Cut Out Back Netting Add an extra 5 cm to one side, fold in half, sew a line to make a middle sleeve

100 cm

105 cm

2.5 cm sleeve

Blue Black

Back Net Gap Horizontal Net Shelf

Top “Cone”

Wing

Wing

Pole in sleeve

Pole in sleeve

Vertical Shelf Top Front Shelf removed to show inside

Cut Out Netting Cone

100 cm

Mark the centre with diagonal lines Cut out a triangular wedge Attach sides to top of trap body Close up the cone as the last step

X

Close up

100 cm

X

Blue Black

Back Net Gap Horizontal Net Shelf

Transparent Perspective View (Not to scale)