Offshore Commissioning Solutions

An ISO 9001-2001 Certified Company

Project Management Software n Project Management n Audits & Risk Assessment n Marine Support n Station Keeping Assessment n DP Assessment n OCS Training Institute n

S e r v i n g Yo u G l o b a l l y

Offshore Commissioning Solutions

Company Profile Email: [email protected] Web: www.ocsolutions.com.au www.ocseng.com

O C S - T E A M W O R K W I T H E X P E R I E N C E

Offshore Commissioning Solutions www.ocseng.com

OCS IT Solutions

O C S — G R O U P O F C O M P A N I E S

www.ocsitsolutions.com

OCS Marine Contractors www.ocsmarinecontractors.com

OCS Training Institute www.ocseng.com

OCS Software & Engineering Solutions www.ocssoftwares.com

U.S.A. 15115 Westheimer, Suite M Houston, Texas 77082 Telephone: +1 281 579 1066 Fax : +1 281 579 0084

Singapore 18 Boon Lay Way, 08-104 Tradehub 21, singapore 609966 Telephone: +65 6887 3493 Fax : +65 6887 4650

U.A.E. P.O Box : 54408. Abu Dhabi, UAE Telephone : +971 (0)2 6416057 Fax : +971 (0)2 6416058

U.K. Silverweels House, 114 Cadzow Street Hamilton MLS 5HP, Scotland, UK Telephone : +44 1805614821

Australia 1 Conservation Loop Mandurah, West Australia 6201 Telephone : +61 8 9535 6006 Fax : +61 8 9535 3959 India -2nd Floor Tejaswini Building Technopark, Trivandrum Kerala

2

Brazil AV.Nilo Pecanho 50, Grupo 1709, Centro, Rio De Janeiro Telephone : +55 21 3084 2244 Fax : +55 21 3084 1446l India (Learning) 6th Floor, Felicity Square, MG Road, Trivandrum, Kerala Telephone : +91 471 6459888

Chairman Message OCS? What does that mean? Optimum Cost Savings? Well……. Here at Offshore Commissioning Solutions we certainly hope so. I set up OCS after seeing the inefficiencies prevalent in many shipyards globally. Since then OCS has grown to be the premier Project Management and Commissioning Company globally. This growth has only happened because our clients have recognised that what we do benefits them by making their projects more efficient and therefore more cost effective. OCS has branched out into other areas, which are of Safety, Operational and various solutions to improve efficiencies and processes in addition to Project Management and Commissioning, and you can read about these areas in this and other brochures that cover the OCS Group. We hope you find the contents of interest and we look forward to adding you to our list of blue chip clients who use our services time and again.

Mark Tranfield. Chairman and Managing Director.

3

4

Offshore Commissioning Solutions - A global offshore engineering consultancy primarily directed at specialising in commissioning and project management in both the offshore and onshore Oil and Gas industry. With a sustained business model OCS have extended their specialist support to encompass the wide vista of the marine industry, including shipyards - shipping / marine companies-providing the specialist added value that extensive operational experiences bring to capital projects ensuring a smooth interface between the Project Management-Commissioning-Acceptance and Operational stages. O ffshore Commissioning Solutions are specialists in the minimising of delays and the maximising of opportunities to enhance smooth hand over procedures between builder and client.

OCS Marine Contractors have used their considerable experience to develop and bring to the market a new generation of vessel capable of multiple operations within the oil and gas sector drilling, work-over, well stimulation, construction and accommodation. These vessels will considerably reduce the costs of developing and maintaining wells whilst at the same time providing a fully flexible work platform for a variety of other activities.

OCS Training Institute was set up to address the shortfall in qualified personnel which is running at critical levels in today is oil and gas industry. The initial courses are aimed at addressing one of the main areas of shortfall and that is the electrical and electronic field. To address this they have put in places courses for Hazardous Area Electrical Equipment Training and an Introduction to PLCs Course. OCS IT Solutions provides network engineering, installation and maintenance solutions. Web hosting, Business Continuity, Consulting Services, Hosting and Data Storage Services, Networking Services, Telecom Services. Also available is a 24/365 Global remote diagnostic and maintenance service. OCS Software & Engineering Pvt. (India) Ltd. specialise in the development of software programmes, initially to make the business of Offshore Commissioning Solutions more efficient and cost effective, of which Project Trac is an excellent example. Also in their portfolio is the production of Multimedia Animated Videos, tailored to the clients requirements, for Safety Training, Rig Induction, Skills Training etc. Any type of animation can be accommodated.

Overview Offshore Commissioning Solutions is a global offshore engineering consultancy providing the highest level of support in the offshore oil and gas industry, across the multi disciplines of electrical, mechanical and marine engineering, though the full process of design, construction, commissioning, acceptance and the final stage of operational acceptance.

OCS Suite of services ?

Project Development / Management

?

Commissioning

?

Audits and Inspection

?

Marine Operations & Support

?

Failure Mode Effects Analysis

?

DP and Marine Operational Management

?

Offshore DP Familiarisation

?

Risk Assessment

?

Owner Representation

?

Drilling Training Support

?

Training Services

O C S — T E A M W O R K W I T H E X P E R I E N C E


The Global Company

5

Project / Development Management

Offshore Commissioning Solutions innovative approach is based in a wide range of operational experience. OCS will always strive to ensure the final product reflects the operational intent for which it was designed and meet necessary Statutory requirements and the particular demands of the global market place;

OCS has many years of experience in project development and management. OCS have developed a special expertise in the establishment of a project philosophy, performing analysis and provision of an organization base and project control.

Ergonomically Compliant & Fit For Purpose People and Communication are the key to any successful business management. OCS are proud of their personnel and the wide breadth of operational experience and technical expertise they are able to provide. The OCS consultants will take a proactive approach with their clients to provide a mutually beneficial structured reporting format directed at maximisation of project efficiency and ultimately operational efficiency;

The OCS quality control and management systems is DNV/ISO 9001 certified, and ensures that all phases of a project are acutely analysed and tightly monitored with supporting documentation. The OCS in-house software (“Project Trac”) is used to integrate the various stages of a project recording detailed information at each stage. Project coverage provided by our own IT systems aid management processes and help reduce risks incorporated into crucial project decisions.

Project services include;

Team Effort—ocs & Client Start up operability for new units is a key stage in the financial life of any new or upgraded project. The latter stages of a capital construction project requires strict discipline to meet the critical milestones and achieve efficient mobilisation leading to client acceptance. OCS have developed their own unique “Project Development & Control Software” to provide a simple but effective project control, resulting in successful and timely project completion.

? ? ? ? ? ? ? ?

In-house Project Software—based On Field Experience Risk management initiatives reflect industry desires and specific clients confidence in the quality of the OCS specific verification process. OCS specialists have developed specific review and assessment processes to cover critical offshore and marine systems. The OCS Failure Modes Effect Criticality Analysis protocol takes the standard industry approach one step on using operational experience—industry guidelines and a rational criticality assessment model.

Risk Management— Quantifiable Assessment OCS work closely with their clients in the application of their specific skill to ensure the highest quality of service and the enhancement of project management efficiency. Through this Team approach OCS have responded to clients wishes in the development of specific initiatives in the pursuit of project management, to provide; ?Maximisation of start up efficiency ?Cost control and start up return ?Traceable process of risk reduction

Engineering Design FED Development Citical Path Analysis Schedule Development Quality Management Project Control Documentation Development Documentation Control

Commissioning OCS are able to offer highly experienced specialists to ensure commissioning

projects can be completed on time and to the allotted budget. The OCS Team have been involved with a great number of installations that are world beaters in their own class. By the application of our own unique depth and experience of the commissioning and integration processes we are able to offer our clients 100% commitment to provide high quality personnel to support and guide projects to their ultimate financial and operational success.

Commissioning services include; ? ? ? ? ? ? ? ? ? ? ?

Commissioning contract review and development Commissioning Philosophy development Project Schedule development Commissioning procedure development QA Inspections & Procedure development Hand over package management Project Tracking software Documentation control Integration & client acceptance Punch list management Equipment certification


O C S — T E A M W O R K W I T H E X P E R I E N C E 6

The Philosophy

7

Project Trac

OCS have developed a powerful project management tool as a result of prolonged involvement in extensive major capital projects. As a result of these “concept to delivery” experiences the OCS Project Management and Commissioning Team developed their own in house software to provide a complete management tool that will assist clients make informed decisions and ensure their projects are delivered on time and within budget. The decisive factor that should determine the suitability of similar software based Project Management systems is it’s internal integrity yet simplicity of use. This design intent is an important feature of this OCS product.

OCS also fully realised the need for any in house software to be integrated within a clients own management system and the baseline platform can be modified to suit a clients specific requirement. Project Trac is a secure web based application and as such will enable secure on line access to a particular clients own data base from any global location.

With the formulation of an agreement of cooperation, Offshore Commissioning Solutions Inc. and Zentech Inc. have created a powerful force in the field of offshore engineering. Zentech provides project engineering from the initial concept through to detailed design, while Offshore Commissioning Solutions provides the project management and commissioning services. The team offers an attractive and seamless package from the initial concept through to a trouble free delivery. This applies not only to their many existing oil and gas clientele, but also to the entire offshore industry in general. Zentech, Inc., an engineering consulting and software development company, headquartered in Houston, TX, is comprised of experienced professionals specializing in providing services to the marine, petroleum, and construction industries. Zentech’s extensive experience with semi-submersibles, jack-up drilling units, barges, drillships, fixed offshore platforms, fabrication yards, floating production systems, risers and pipelines allows us to solve technical problems in an efficient and cost effective manner. Zentech also have a range of proprietary Jack Up designs.

Core functionality includes; ? ? ? ? ? ? ?

Project Management Modules Project development Project Tracking Mechanical Completion Monitoring Pre-commissioning Monitoring Punch List—Management Project completion Monitoring

? ? ? ? ? ? ?

QA System Inspection development Process Installatiopn Monitoring Electrical Completion Monitoring Commissioning Monitoring Problem Forecasting Recording & reporting systems

For Further Information on Project Trac please refer to our Project Trac product brochure.

8

A Powerful Combination

Zentech also offers an array of software packages which are used by engineering firms, drilling contractors, oil companies, classification societies, and shipyards worldwide.



Technology has revolutionised every minutiae of global commerce. Commercial success depends upon efficient use of technology and the ability to utilise that technology in an effective way.

With over twenty years of industry experience, Zentech's staff of engineers continues to serve many major drilling contractors, engineering companies, equipment manufacturers, oil companies, shipyards, fabricators, and regulatory agencies worldwide. Our projects have received approval from the following regulatory agencies: DNV, ABS, Lloyd's, BV, DeN, NPD, NMD, USCG, and SOLAS.

Web: www.zentech-usa.com

9

Failure Mode Effects Criticality Analysis

OCS have developed a comprehensive Audit and Inspection program. We have designed the methodology to provide thorough verification through detailed inspection, testing and reporting.

The traditional notion of FMECA studies in the offshore industry have been related to Dynamically positioned units only. The OCS Marine and Engineering Team have now developed the original template to enable it to be applied to a wider scope of such studies which now include;

The OCS inspection team will ensure all equipment is fit for purpose, in good operational condition and verify compliance with the necessary international standards and in accordance with the highest level of industry practice.—Class—API—IADC—IMO etc. Due to the breadth of experience we have available we will also be able to advise our clients on particular requirements of new global areas or new operator demands pertinent to a particular global region.

OCS inspection programs have been designed and used extensively for the following purposes;

?Client On hire / Off hire audits ?New Build final acceptance testing / inspection ?Upgrade assistance and prelient inspections / preparation ?Operators routine inspection ?Insurance company assessments ?Risk Assessment ?Hazop / Hazid ?Investigation into Accidents and operational events ?Client specific requirements

OCS have developed the FMECA methodology as a result of studying similar work undertaken in the aeronautical and automotive industries. Initially the work was destined to be applied to Dynamically positioned vessels, but after discussions with clients it was soon apparent the basic template could also be applied to more specific equipment and systems studies where breakdowns or failures would have a major commercial impact. With the availability of specialists in the particular field and their input the unique process could be initiated to a clients requirements.

Risk Assessment

Within the FMECA report documentation OCS have removed the heavy reliance other consultancy groups place upon subjective criticality assessment by the use of an accredited risk ranking matrix with a history based in many shore side industries.

The assessment of risk in its many formats is a critical part of the day to day life of the oil and gas industry. It may be a practice involving shop floor assessments, permit to work or exposure assessments concerned with those of a commercial project.

The Risk Ranking is a simple number and indicates the status of the failure with respect to action and mitigation in support of continued operation. Risk Ranking is defined from the product of;

The OCS team have developed their Assessment philosophy based upon internationally recognised standards used by operators, clients and contractors alike. OCS are able to offer a unique risk evaluation and mitigation process for their wide breadth of clients.

The process uses established standards but places their interpretation into a practical operational concept and is based upon; ?Hazard Identification ?Equipment Evaluation ?Personnel review ?Procedure Audits ?Limit setting identification. sessment Team personnel will evaluate areas of potential short fall, exposure, or enhanced risk, and outline any necessary changes or risk mitigation required to meet client specifications to ensure the highest operational level of safety and a reduction f risk to the common “ALARP” standard.

10

?Cranes—both Onshore and Offshore ?BOPs ?Drilling Systems ?Handling system ?Ballast and Bilge Systems ?Engineering Designs

? Severity x Effect

OCS also use Risk Priority Number methodology, an established technique for analyzing risk associated with potential problems identified during the FMECA process. The derivation of RPN is based upon parallel industry methodology where RPN is equated to the product of; ?Severity x Occurrence x Detection. The use of numeric indices assists to highlight critical issues enabling the development of an efficient remedial risk mitigation process based upon risk ranking



Audits & Inspection

OCS are committed to provide their clients with the highest value of service. All report observations will be supported by suitable recommendations based upon best industry practice and an effective level of risk mitigation. OCS will provide the client with a pragmatic solution based in their own operational knowledge and experience

11

Marine Systems Review

OCS are able to call upon a background of over 20 years experience in the offshore marine

As a result of their extensive Marine Experience and position of seniority in their previous careers

industry, centred in a wide range of environmental conditions from the North Sea to the North Atlantic, Gulf of Mexico, Brazilian Offshore Basin, West Africa and leading to Indian Ocean and Pacific rim.

the OCS personnel can undertake the more conventional marine review and assessment which may be in the form of;

OCS personnel have been involved with the development of significant operational policies in the deepwater DP drilling industry. This involvement when combined with the number of DP units with which they have first hand knowledge places the OCS Marine personnel at the forefront of the DP industry. The prime direction for support is that of Marine Operations integrated with Dynamic Positioning systems for such specialist units as Shuttle Tankers, DP FPSO, Dive vessels, Construction units and flotels. OCS have also been asked to provide assurance in terms of vessel compliance evaluation for specialised well test and offshore supply vessels.

?ISM Audit or internal review ? Compliance reviews for Class or Flag state or IMO ? Operational Review for specialist practices or Procedures ? On Hire/Off Hire surveys ? General vessel surveys—IMCA—Marine ? Inspection Standard ? Specific system inspections—Mooring ? Ballast-Safety-Machinery-Maintenance Spare gear

Marine & DP Operational Support

Marine Risk Management

Within the Marine and DP scope, typically OCS are able to offer a wide range of services which include;

As vessels advance technologically to meet ever increasing operational challenges, the need for increased risk management becomes a mandate.

? FMECA and Annual Trials ? DP Incident Investigation Marine & Engineering ? Provision of Training and Induction services for Marine & Drilling personnel onboard DP Drilling units ? Provide and Facilitate Hazops for DP units ? Provision of Corporate and specific Operational manuals compliant to ISM requirements ? Provision of vessel based specialist DP Emergency Response Training scenarios ? Client representation on specialist DP operations—Dual Vessel Compliance reviews—MCA—Class—IMO

DP Drilling Risk Management Through their extensive operational DP drilling experience, and the development of innovative procedures in the pursuit of maintaining safe operating standards, OCS are able to provide a suite of services that are in line with the major operator requirements such as Statoil, BP or Petrobras. These services will identify policies and procedures will be fully compliant with IMO and IMCA guidelines, and will use a Hazard identification and mitigation process to identify; ?DP Alert Status for various failure modes ?Degraded Operational Status ?DP system failure modes response ?Documentation and studies required for specific operations ?Line of internal communications for DP issues and accountabilities ?DP operational Limitations ?Management team structure Roles and Responsibilities

OCS combine their overall expertise to assist their clients to ensure the process of risk management becomes a way of life and commands the proactive approach of the units personnel, with particular regard to the Management team and their particular expertise. The OCS team can provide a wide range of services to support the marine risk management process, which may be; ?Personnel Training ? Competency assessment ? Establishing a “Vessel One Team Concept” ? Limit setting ? Contingency Planning & Emergency Preparedness


O C S — T E A M W O R K W I T H E X P E R I E N C E 12

Marine Support-Dp Units

13


The Marine Engineering and DP specialists at OCS have long recognised that the traditional reporting format for an FMEA of a Dynamically positioned vessel can result in a speculative and light weight document which fails to probe the deepest level of control system design, equipment configuration, to the lowest component level. Traditional reports have been based upon the investigation teams specialist knowledge of the particular discipline which they are invariably unable to interpret into the operational design of the vessel, and a reliance upon the integrity of vendors systems - reliability upon a black box approach.

Too often FMEA reports contain speculative comment which are of little use to the owners. In addition a “light” approach fails to review the full extent of redundancy-or lack of it. The component level investigation being the only possible approach. OCS FMEA specialist realised at an early stage after working with a wide scope of clients that although current reports were being accepted, these reports provided little value to the client except as meeting a particular class or contractual requirement. Operational value was a minimum and recommendations invariably based in a speculative comment.

“Station Keeping” for any Dynamically positioned vessel is the critical activity which demands 100% application and verification. The use of OCS’s unique FMECA process is a part of the systematic assurance of a vessel’s ability to remain on location. As has been identified the FMECA will cover control systems, hardware and software, power generation, propulsion and all those systems necessary to maintain the DP unit on location. To support the FMEA process OCS can provide their clients with a wide range of services developed from the Deepwater DP drilling industry but now also proven to be of major risk reduction and mitigation benefit to a wide range of other DP vessels Construction - Dive - Well Test - Drilling - Support - Flotels. Failure Mode Effects Criticality Analysis See previous page. “Location specific Operating Guidelines”-LSOGOCS can facilitate this process to provide a quantifiable risk identification process vessel and location specific, operationally based guideline in the form of a simple matrix. Formulated and agreed by the vessel team with the sole intent of providing the DPO and key personnel such as Driller - Construction Superintendent - Drive Supervisor, on DP alert levels in the event of a system failure, or upon a predetermined non standard event occurring Operational Management Review Provides a full audit of the DP and integrated control system hardware and software, and reviews the suitability and effectiveness of the necessary procedures and management controls established in the pursuit of reducing operational risk. The OCS Team work with the operational personnel to ensure all such reviews are completed with minimal disruption, using their skills to suggest areas of enhancement or implementation of BIP (Best Industry Practice). The overall assessment and recommendations will be set firmly in a practical approach, identifying sensible areas of improvement to provide a level of risk mitigation commensurate with the day to day operation of the vessel.

OCS have developed their own FMECA methodology, the key building blocks for the development of the DP FMECA being; ? ? ? ? ? ? ? ?

14

DP Assessment

ICA“Guidelines on Failure Mode Effect Analysis” M166 April 2002 Classification Society Rules. BS 5760:1991: 'Reliability of Systems, Equipment and Components', Part 5: 'Guide to Failure Modes, Effects and Criticality Analysis (FMEA and FMECA). ICE 60812: 'Analysis Techniques for System Reliability-Procedure for Failure Mode and Effects Analysis (FMEA)’. IMCA Publication “Guidelines for the Design and Operation of Dynamically Positioned Vessels” (IMCA Document M 103 February 1999). IMCA Publication “Reliability of Position Reference Systems for Deepwater Drilling” (IMCA Document M 160 January 2001). IMO Guidelines for Vessels with Dynamic Positioning Systems –MSC/Circ 645 6th June 1994. IMO MSC Resolution 36(63) Annex 4 –Procedures for Failure Mode and Effects Analysis (HSC Code). US Department of Defence MILTD629A

Competency AssessmentOCS marine specialists believe the art of communication and the spoken word is critical to the efficient progression of any work scope. Communication is a two way activity and when combined with observation during operational periods it is inevitable that observations may be made regarding personnel competency and abilities. Such observations may also reflect company standards and shortfalls which are not normally highlighted. It is not unknown for Complacency and “bad Operational” habits to be found during such assessments, which without the intrusion of a third party may have otherwise remained undiscovered. Emergency Preparedness-; Emergency Preparedness and contingency planning are frequently overlooked as an issue of station keeping. Without a proactive approach and associated training an increased threat to the integrity of the station keeping will exist. OCS work with the onboard teams to develop suitable training scenarios and will facilitate suitable training regimes to motivate key personnel to have an enhanced awareness of the risks and promote an early response. Training and FamiliarisationOCS DP specialist believe at all times in providing the highest level of support and frequently assist operational teams in the updating and development of their operational skills. Induction and cross discipline training is a critical item often neglected. Inter discipline knowledge and an awareness of emergency procedures in other operating areas onboard technically advanced vessels will assist in the successful controlling of any emergency condition. OCS can provide the necessary facilitation to provide such training and other training deemed necessary to reduce the over exposure to operational risk.


Failure Mode Effects Criticality Analysis

15

Training Support

OCS intend to provide a wide variety of familiarisation and training courses. These courses are intended to train personnel who wish to work offshore to a level of competency which will enable them to work SAFELY in their new environment and not be a danger to themselves or their colleagues and also, where needed, to improve the operational abilities of rig personnel, enhancing the levels of competency, leading to a reduction in dependence upon supervisory input and more importantly to an increase in safety awareness.

16

the need for the presence of competent personnel in the work place, whether it be on the Drill floor, sack store, control room or workshop. The Drilling industry demands a high level of personnel competency in assuring a high operating standard and the maintenance of suitable levels of personnel, unit, and corporate safety.

Due to the huge demand for oil and gas and the consequent high levels of activity in exploration and production and, given the unprecedented number of new build and refurbishment programmes, the Oil and Gas Industry is now desperately short of skilled personnel.

The scope of training offered by OCS will cover specific areas key to the enhancement of the level of safe operating practices on board the unit. The training services will be suitable for personnel employed in the broadband of exploration and development drilling, whether based in the Onshore or Offshore areas.

Numerous holes drilled in certified box to fit equipment

This is driving companies to either attract personnel from other companies with enhanced packages or, employ people with no experience with the consequent increased Safety Risk.

In many Global areas the lack of experienced

Flamepath severely scratched and corroded rendering it unfit for purpose

personnel has been temporarily overcome by the presence of highly competent and experienced supervisory personnel. However this solution has its own limitations, depending upon “On the job training” inevitably detracts from the overall efficiency of the operation and, in truth takes a longer period of time to bring personnel up to a standard. This is because tuition can only be given in relatively short and broken units.

In response to their international clients demands, OCS have established a global Training Institute. The purpose of the Institute is to provide intensified theoretical and practical training to personnel away from the work site as OCS have done in the past. This enables more personnel to be effectively and usefully trained than would be the case at the work site. The first of these institutes was opened in May of 2007 at OCS is Houston, USA corporate office and, in the first instance, focuses on training of personnel in the correct selection, installation and maintenance of electrical equipment in Hazardous Areas. This is an area that has been severely neglected in most parts of the world. It is however an area that, potentially, has the highest possibility of causing a catastrophic incident in any sector of the Oil and Gas Industry.

? ? ? ? ? ? ? ? ? ?

Hazardous Area Competency Training. Electrical Maintenance. Electronic Maintenance. PLC Introductory and Advanced Courses. Electrical Awareness Training. (Available for all personnel) Mechanical Maintenance. Permit to Work (This will be to client standards) Working at height. Dropped Object Surveying. Confined Space Entry.

Hands on training taking place in custom designed workshops enables students to gain practical experience of correct installation procedures. Theoretical work takes place in a separate lecture room with audio video facilities

NEC 500 & NEC505 Current courses are held to IEC standards due to the requirements of our current clients to address global issues. During the early part of 2008 courses to NEC500 and 505 will commence in order to address the specific needs of USA based Oil & Gas industries.



OCS recognise and understand

17

18

ADMA (U.A.E.) BP (U.K.) BP (U.S.A.) British Gas. (UK & Indonesia) Chevron Texaco. (World Wide) Diamond Offshore. (UK & USA) (UK, Norway & India) Egyptian Drilling Company. (Egypt) Frigstad Offshore Pte. Singapore. (Singapore & Indonesia) Frontier Drilling. (USA) Gasflot. (Russia) Global Santa-Fe. (World Wide) Gulf Drilling International. (Qatar) JAMSTEC Mitsubishi HHI. (Korea) KCA Deutag. (World Wide) Kerr McGee. (USA & UK) MITSUI. (Korea) Noble Corporation. (World Wide) Petrobras & Transpetro. (Brazil) Pride International. (World Wide) Prosafe Offshore. ( UK) Santa Fe. (World Wide) Seadrill (Korea) Statoil. (Norway) Schlumberger Drilling Services. (World Wide) Transocean. (World Wide) Woodside Energy (Australia)


Client Reference List


Our Valuable clients

19