Using a clean, regulated air supply, model 8064A transducer provides a 3 - 15 psig pneumatic output which is proportional to a DC milliamp input.
Electro/Pneumatic Converter Models 8064A and 8064C
Typical applications
8064A
l Controls AMOT pneumatic temperature control valves (G valve) l Converts a 4 to 20 mA input signal to a directly proportional 0.2 to 1 bar (3 to 15 psi) pneumatic output signal Key benefits 8064A l High vibration resistance - Lloyds Marine l Suitable for longer pipe runs l Fully adjustable for optimised system operation l ATEX hazardous area certification
Key benefits - 8064C l Accepts high supply pressure - avoids use of additional regulator l Factory set for ease of installation
8064C
l Low cost alternative to 8064A l ATEX hazardous area certification
Overview - 8064A Using a clean, regulated air supply, model 8064A transducer provides a 3 - 15 psig pneumatic output which is proportional to a DC milliamp input. The mechanism is damped with a viscous silicone fluid, making it insensitive to shock and vibration. 8064A
Model 8064A may be specificed with output either direct or reverse acting, increasing or decreasing with an increasing input.
Application Electro-pneumatic system
Temperature probe 8060
Temperature controller 8071D
Electro-pneumatic converter 8064A
The electro-pneumatic valve system (see datasheet Datasheet_G_temperature_control_ valve) combines both electric and pneumatic technology, consisting of a pneumatically actuated three-way control valve with an electro-pneumatic converter.
G valve
The probe sends a resistance signal to the electronic controller, which in turn sends a 4 to 20mA signal to the 8064A I/P converter that converts this to a pneumatic signal. The electro-pneumatic system combines the features and functionality of the AMOT electronic control system with the fail-safe action benefits of a pneumatically actuated valve.
Overview - 8064C The 8064C Proportional I/P Converter uses advanced closed loop solid-state electronic control to achieve accurate, high resolution pressure control.
8064C
It is available in intrinsically safe and nonincendive type nL versions and its minimum vibration effect and IP66 weatherproof rating make it ideal for field application.
Application The electro-pneumatic valve system (see Datasheet_G_temperature_control_valve) combines both electric and pneumatic technology, consisting of a pneumatically actuated three-way control valve with an electro-pneumatic converter.
Electro-pneumatic system
Temperature probe 8060
Temperature controller 8071D
Electro-pneumatic converter 8064C
G valve
The probe sends a resistance signal to the electronic controller, which in turn sends a 4 to 20mA signal to the 8064C I/P converter that converts this to a pneumatic signal. The electro-pneumatic system combines the features and functionality of the AMOT electronic control system with the fail-safe action benefits of a pneumatically actuated valve.