RANGER COLLEGE Welding Technology Syllabus

19 downloads 10107 Views 303KB Size Report
Aug 17, 2015 ... WLDG 2447 – Advanced Gas Metal Arc Welding ... Modern Welding (11th Ed.) ... and demonstrate command of welding technology. 5. Videos ...
RANGER COLLEGE Welding Technology Syllabus COURSE NUMBER AND TITLE: WLDG 2447 - Advanced Gas Metal Arc Welding CREDIT HOURS: 4 HRS/WK LEC: 2 HRS/WK LAB: 4 LEC/LAB/HRS/WK COMBINATION: 6 Name of Instructor: Dr. Marlin Priddy Office Location: Tom Peebles Welding Building Office Hours: 3:30-4:30PM (Monday – Thursday) Other times by appointment Office Phone: 1-254-647- 5436 College E-mail: [email protected] I.

CATALOG DESCRIPTION Advanced topics in GMAW welding, including welding in various positions and directions. II.

COURSE GOAL The student will exhibit expertise in various welding positions on pipe and structural joint designs; describe safety rules and equipment use; and describe the effects of welding parameters in GMAW. The student will weld various joint designs and diagnose welding problems and perform visual inspections. III.

COURSE CONTENT 1. GMAW processes will be studied in depth 2. GMAW with mild steel, stainless steel, and aluminum 3. Discuss and develop AWS(American Welding Society) Welder and Welding Operator Performance Qualification Record 3. Diagnosis and correcting machine problems 4. Preparing various materials to weld 5. Using different gas mixtures 6. Become familiar with different electrodes used in GMAW TEXTBOOK (S); READINGS; MATERIALS

Textbook is required by the student and can be purchased at Follett Bookstore on campus. 1. Modern Welding (11th Ed.) Author: Althouse, Turnquist, Bowditch, Bowditch, & Bowditch, The GoodheartWillcox Company, Inc. Tinley Park, IL ISBN: 978-1-60525-795-2

1 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

Supplies Please bring with you each day: 1. Pen, pencil, three ring binder and paper 2. Textbook 3. Good attitude and ready to work You are preparing to enter the profession of welding and like other technical crafts, it requires specialized tools and equipment. Therefore, you will be required to purchase the following items. Remember that quality tools cost more initially, but over time, they are actually less expensive. They are more durable and will give you pride of ownership for years to come. Please be aware that you will not be allowed to work in the lab if you are not properly dressed. 1. Safety glasses 2. Ear plugs (Provided by school) 3. Welding hood with replacement lenses 4. Boots or high-top shoes 5. Gauntlets or gloves, according to your class 6. Leather sleeves or jacket 7. Long sleeve heavy cotton work shirt (i.e. Wrangler, Lapco, Carhart) 8. Face shield with clear lenses (Provided by school) 9. Cutting glasses or face shield with shade 4 or 5 lenses 10. Hand wire brush (Provided by school 11. Chipping hammer (Provided by school) 12. Striker with flint replacements (Provided by school) 13. Oxy/Fuel tip cleaners (Provided by school) 14. Soapstone with holder 15. 6” needle-nose pliers with side cutter, if taking a GMAW course (Welder’s Plier such as Welpers™ recommended) (Provided by school) 16. Vice Grips™ 10R, or 10WR, or 10CR (Provided by school) 17. 12” combination square with steel blade (Provided by school) 18. 25” retractable tape measure (Stanley™ Brand preferred) 19. 4½” diameter grinder (Provided by school) 20. Extra grinding disks (1/4”x4 ½”) (Provided by school) 21. Extra wire wheels (4 ½”) (Provided by school) 22. 2-lb ball peen hammer (Provided by school) 23. 8” crescent wrench (Provided by school) 24. box or bucket or tool bag V.

Methods of Instruction 1. Lecture will be used to present the material 2. Lecture will be supported with demonstrations and

handouts to facilitate 2

WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

the learning process. 3. Demonstrations will be given at the beginning of each unit of instruction to include all safety rules and precautions to be observed. 4. Students will use Blackboard and other eLearning technology to gain knowledge and demonstrate command of welding technology. 5. Videos designed to help in terminology and performance of welding professionals VI.

SCAN COMPETENCIES - Workforce Education Programs/courses Scans (SC) 1.1 Locate, understand, and interpret written instructions to perform task 1.2 Interpret blueprints and material catalog 1.3 Read Text of Technical Manuals, graphs and schedules 2.1 Communicate written thoughts, ideas, information and messages 3.1 Perform basic calculations 4.2 MATERIAL/FACILITIES - Acquires, stores, allocates, and uses materials or space efficiently 5.1 Participates as members of a team-contributes to group effort 5.2 Teaches others new skills 5.4 Exercises leadership-communicates ideas to justify positions. Persuades and convinces others. Responsibility challenge existing procedures and policies. 6.1 Acquires and evaluates information 6.3 Interprets and communicates information 6.4 Uses computers to process information 7.3 Improves or designs systems-suggest modifications to existing systems and develops new or alternative systems to improve performance 8.2 Applies technology to task-understands overall intent and proper procedures for set up, and operation of welding equipment 9.1 Creative thinking-Generates new ideas 9.3 Problem solving-recognizes problems and devises implements plans of action 9.4 Seeing things in mind’s eye-organizes and processes symbols, pictures, graph flow charts, objects, and other information 10.2 Self-esteem-- believes in own self-worth and maintains a positive view of self 10.3 Sociability-demonstrates understanding, friendliness, adaptability, empathy, and politeness in-group settings 10.4 Self-management-assesses self accurately, sets personal goals, monitors progress, exhibits self-control 10.5 Integrity/Honesty-choose ethical course of action 11.1 Listen and speak well enough to explain schedule and procedures and work in teams 11.3 Describes complex systems and procedures to co-workers and supervisor 3

WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

11.5 To teach others or new workers and solve problems VII.

LEARNER OUTCOMES 1. Welding steel pipe using the roll method (SC 1.1 – 8.1 – 9.5) 2. Welding steel pipe in 5G position (SC 1.1 – 8.1 – 9.5) 3. Testing with steel plate in flat position (SC 1.1 – 8.1 – 9.5) 4. Testing with steel plate in the horizontal position (SC 1.1 – 8.1 – 9.5) 5. Testing with steel plate in the uphill position (SC 1.1 – 8.1 – 9.5)

VIII. COURSE CALENDAR The schedule is tentative and subject to change depending upon the progress of the class. Daily assignments, as well as tests, include a written component. IX.

COURSE/CLASSROOM POLICIES 1. Attendance WARNING—READ CAREFULLY! If you accumulate unexcused absences exceeding 10% of the total eighty clock-hours required for this course as set forth by the Texas Higher Education Coordinating Board, you will be dropped from class. You will receive the grade of W. If the final semester withdrawal date has passed, you will receive the grade of F. (This means you will be denying yourself credit for the course if you miss any combination of eight classes and/or lab times.) Excessive absences result in (1) your failure to progress towards the objectives of the course, (2) unfair demands on your instructor's time by taking him/her away from responsible students in order to catch you up on missed assignments, and most important (3) you become an increased safety risk due to your diminished familiarity with hazardous equipment and safety protocols. 2. Lateness/Tardiness Any student coming to class or laboratory more than three minutes from the scheduled start time will be counted as absent. RC Policy on Attendance: Regular and punctual attendance in all classes and labs is required of all students..

Unexcused absences are counted from the first day of class as listed in the college calendar, regardless of the date of the student’s registration. The only excused absence is an authorized college activity. All work and/or assignments missed because of an excused absence must be completed within one week or the excused absence will be counted as unexcused. An excused absence during the 4 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

one-week period does not extend the deadline for the completion of assignments. Class starts at the scheduled time, you have three additional minutes to be in your seat, prepared for class. If you show up to class or more than three minutes late you will receive an unexcused absence for the class. Any student leaving class or lab early will need to visit with the instructor before returning to class or lab. If the early departure is not justifiable, the student may be marked absent for the class or lab for that instructional time. 2. Class Participation Each student is encouraged to participate in classroom discussions and in lab. You are here to learn, and the best way to learn is by hands-on and participation. Always remember: safety comes first! 3. Missed Exams/Assignments/Make-up Policy All assignments and missed exam (s) are to be made-up within one week of the assignment or exam. Get with the Instructor during office hours to set-up a time to make it up. 4. Lab safety/health Safety lectures are done every day, before any equipment is used. Safety is the #1 factor when working at home, school or industry. Safety Regulations Welding can become very dangerous—even fatal—if you are careless and neglect safety precautions. Most accidents occur when people get in a hurry, so learn to pace yourself and move cautiously and deliberately. The College endeavors to provide you with proper training and a safe environment, but you must also do your part by abiding by the following rules. If you persistently violate these rules, you will be considered a safety risk and will be withdrawn from class: 1. 2. 3. 4.

Wear your safety glasses at all times. ALWAYS place face shields and welding hoods with the lens side UP!!! Wear your ear plugs in areas of high noise levels. Know the locations and proper use of fire extinguishers. They are located at the exit to every classroom and laboratory. 5. Do not weld or grind near oxy-fuel tanks, manifold connections, or other potential sources for gas leaks. 6. Beware of the signs of dehydration, especially during warm months: disorientation, confusion, light-headedness, flushed appearance, headache, and exhaustion. Do not wait until these signs appear—drink fluids and take breaks regularly. 7. Be mindful of proper ventilation in your work area. 5 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

8. When using portable grinders, be sure that you direct sparks away from others. 9. When using stationary pedestal grinders, be sure that the tool rest is adjusted as close to the grinding wheel as possible without touching it (1/16”). Always wear safety glasses when grinding and wire brushing. Do not wear gloves when using pedestal grinders. 10. Do not handle oxy-fuel equipment with oil or grease on your hands or clothing. 11. Do not wear loose clothing or dangling jewelry when working in the lab; tie up long hair. 12. Be sure that you have the proper shade of filter lens in your welding helmet or face shield. 13. Do not attach your ground lead to water pipes or electrical conduit. 14. When welding in a booth, keep your door closed. When welding in an open area, shield your arc with welding curtains. Always consider the line-of-sight between your arc and the eyes of bystanders. 15. To avoid burns to others, do not discard hot metal without first quenching it. Write “HOT” on objects too large to bring to the quench tank. 16. Read Chapter 1: “Safety in the Welding Shop” in your textbook by Althouse, Turnquist, Bowditch, Bowditch, and Bowditch Modern Welding, 11th Edition mentioned earlier in this syllabus. 17. Report all accidents to your instructor without delay. If you suspect an unsafe condition or an equipment malfunction, bring it to you instructor’s attention IMMEDIATELY. Special Warning about Bloodborne Pathogens A number of very serious Bloodborne Pathogens lurk in today’s public environments that can be devastating to your health—even fatal: ·HIV — Human Immunodeficiency Virus ·AIDS — Acquired Immunodeficiency Syndrome ·Hepatitis A, B and C ·Tetanus — “lockjaw” ·MRSA — Methicillin Resistant Staphylococcus Aureus ·Necrotizing Fasciitis— “flesh-eating disease” If you sustain a nick, cut, puncture, abrasion, or any wound in which blood surfaces— however minor—cease all activity immediately and proceed to a First Aid Kit to apply antiseptic and a protective bandage. Time is critical in treating Bloodborne 6 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

Pathogens. Notify your instructor, who will call Campus Police for further assessment, and if necessary, Emergency Medical Services will be notified. You will need to fill out the following forms, as appropriate, to activate your student liability insurance. If your injury requires emergency room treatment, it is much easier to have your forms with you at the time of admittance. It is infinitely more tedious getting signatures from treating physicians and hospital personnel days after the occurrence. These forms are attached to the cabinet doors of the First Aid Kits: 1.Student Accident Liability Form 2.First Aid Log 3.Near-Miss Form Laboratory Policy 1. You must attend class at the time for which you are enrolled. 2. When you complete a project, request approval from your instructor. You will not be credited for unproved projects. 3. Cleanup time is ten minutes before the end of class. Sweep your immediate work area and return equipment to the tool room. Surrounding work areas must be cleaned with the combined efforts of all students. 4. Do not waste metal. Cut away practice welds and consolidate pieces. Do not remove metal from the shop. This will help keep lab fees reasonable in the face of rising costs for steel. a. If there is an equipment malfunction, inform your instructor immediately so that it can be repaired and returned to service. b. Smoking, dipping and chewing is not permitted on campus

5. Academic Dishonesty Any student caught cheating on any exam, report or project whether in the classroom, lab, or elsewhere, will earn a grade of F for this course. 6. Student Behavior Policy Everyone will conduct their selves in an adult manner at all times! Safety is the #1 factor and anyone caught in any kind of horseplay will be reprimanded or dismissed for the rest of the class period with an unexcused absence. NO TOBACCO! No PHONES!!! No Electronic devices other than a calculator. 7 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

7. Available Support Services Student services, library, tutors, etc… 8. ADA Statement: Ranger College provides a variety of services for students with learning and/or physical disabilities. The student is responsible for making the initial contact with the Ranger College Counselor. It is advisable to make this contact before or immediately after the semester begins. X.

ASSESSMENT (Grading Procedure)     

Grading Scale: Maximum Score 2000 points Weekly assignments 410 (20.5%) Major Grades 1100 (55%) Professionalism 290 (14.5%) Final 200 (10%)

Points for a grade of an A = 2000 – 1790 B = 1789 – 1590 C = 1589 – 1390 D = 1389 – 1190 F = less than 1190 

Weekly Assignments grades will consist of all homework assignment, attendance, cleaning, tardiness, and work ethic. These grades will be average together to make up 20.5% of the students final grade.



Major Grades include all test grades, quiz grades, and will be averaged together to make up 55% the students final grade.



Professionalism (14.5%). Being on time, prepared to work. Great attitude. NO foul language. No use of cell phones. No use of tobacco. Student following directions. Leaving the work areas clean and organized.



Final Grade will consist of one final and it will make up 10% of the students final grade.

The guidelines for grading the project are: 1. How well he or she positioned their test pads (SC 6.3– 8.2) 2. How well they maintained slag-free welds (SC 8.2 – 9.5) 3. How well they keep their welds tight and straight (SC 8.2 – 9.5) 4. How well the student uses his or her time to complete a project (SC 4.3) 5. How well the student prepares the test pad for the instructor to grade (SC 8.2 – 8 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

9.5) 6. Student’s work will be based on the criteria set forth by AWS D1.1 Code book. The grading scale for the project is: A - The ideal weld has a straight, tight, and clean weld that has perfect uniformity. When this test pad has been cut, ground, and filed, it will show no evidence of slag or improper penetration. B - A good weld has the desirable quality of beads that have been run straight and tight; however, bead patterns are not consistent with each other. C - A fair weld shows that the welder needs more practice in keeping his or her welds straight, tight, clean and uniform. D - A poor weld is one that lacks all of the above qualities and will not be accepted by the instructor. XI.

NON-DISCRIMINATION STATEMENT Admissions, employment, and program policies of Ranger College are nondiscriminatory in regards to race, creed, color, sex, age, disability, and national origin. All recruitment and admissions material complies with Section 504 and the ADA. XII. EMERGENCY FIRE PLAN “In case of fire or other emergency, the nearest exit from this classroom is the front door or if you are in the lab it would be out the bay doors. Please remain outside the building until otherwise notified by college officials.”

9 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15

XIII. RECEIPT OF SYLLABUS FORM (Required of all students and filed by the instructor) Legibly print the following information: NAME: __________________________ DATE: ________________ “I have received and understand the information in the syllabus for, (WLDG 2447 - Advanced Gas Metal Arc (MIG) Welding) and I agree to abide by the stated policies.” SIGNATURE OF STUDENT: ______________________________ Student Medical Information 1. Are you allergic to any substances found in the classroom or Lab? a. Yes ______Please name_____________________________ b. No _____ 2. Do you have asthma? Yes _____________ No ___________ 3. Do you have any other medical condition the instructor should be aware of for your safety and well-being? 4. Yes ______ No ________ a. If yes, please describe or list your condition(s). ____________________________________________________________ __________________________________________ 5. Are you capable of lifting 50 pounds? Yes ____ No _____ Emergency Contact Persons 1. Please print clearly the names and numbers of two people to be contacted in case of an emergency. a. Name _____________________ Phone ______________ b. Relationship to student _________________________ 2. Name _______________________ Phone _________________ Relationship to student ______________________________ 3. Please give your permanent address. ________________________________ _________________________________ 4. Please print clearly the names and numbers of two people who know you best. (Examples: relative, friend, roommate) a. Name _______________________ Phone ______________ b. Name _______________________ Phone ______________ 5. Are you involved in any sports, rodeo, or other extra-curricular activity? Yes ______ No _______ Coach’s Name ____________________

10 WLDG 2447 – Advanced Gas Metal Arc Welding Ranger College – Welding Technology

Rev 8/17/15