Grips & Fixtures. Peel Jig for Testing Peel Cling of Stretch Wrap Film to. ASTM D
5458 - 95 (Reapproved 2001): TG 1167. A peel test jig to measure peel cling.
Grips & Fixtures Peel Jig for Testing Peel Cling of Stretch Wrap Film to ASTM D 5458 - 95 (Reapproved 2001): TG 1167 Description A peel test jig to measure peel cling. A film strip is adhered to a flat film attached to the inclined surface.
The force measured is that required to remove the film strip from the flat film.
Applications Designed to measure peel cling on stretch wrap film in accordance with ASTM D 5458 - 95.
Cling is of critical importance in maintaining a tight wrap after a load is stretch wrapped.
Specifications Maximum Capacity: Minimum Recommended Load Cell: Maximum Sample Width Base Sample Width: Peel Strip Sample Width: Eye End Fixing Size: Weight of Jig: Temperature Range:
100 N 5N
(22.5 lbf) (1.12 lbf)
125 x 500 mm 254 x 180 mm 15.85 mm 3.2 kg Ambient
(5 x 20 in) (1 x 7 in) (0.6 in) (7 lb)
Peel Test Jig: TG 1167 Applications: For testing the peel cling of stretch wrap film to ASTM D 5458 - 95 (Reapproved 2001)
Specification Sheet November 2008 SS-T TG-3 3600-1 1108 © 2008 by AMETEK, Inc.
www.lloyd-instruments.com
Operating & Safety Information Operating Notes Follow the test procedure as outlined in the standard ASTM D 5458 - 95.
Safety Precautions Do not exceed the maximum rated force of the grip. Do not use the grip for any other purpose than for which it is intended. Do not use the grip if it damaged in any way. Always use manufacturer aproved fixing pins. A risk of pinching is associated with this grip.
Ordering Information Model No.
Part No.
Capacity
Description
TG 1167
01/3568
100 N (22.5 lbf)
Peel Test Jig for Testing Peel Cling of Stretch Wrap Film to ASTM D 5458 - 95
www.ametek.com UK / Head Office
France
Germany
USA
Singapore
China
Lloyd Instruments Ltd 12 Barnes Wallis Road Segensworth East, Fareham Hants, PO15 5TT
AMETEK S.A.S. Rond Point de l’Epine des Champs Buro Plus - Bât. D 78990 Elancourt
AMETEK GmbH Rudolf-Diesel-Straße 16 D-40670 Meerbusch
AMETEK Measurement & Calibration Technologies Division 8600 Somerset Drive Largo, Florida 33773
AMETEK Singapore Pte Ltd No. 43 Changi South Avenue 2 #04-01 Singapore #05-12 Techpoint 486164, Singapore
AMETEK, Inc. - Shanghai Rep. Office Rm 912, Metro Tower 30 Tian Yao Qiao Road Shanghai 200030
Tel Fax E-mail Web
Tel Fax E-mail Web
Tel Fax E-mail Web
Tel Fax E-mail Web
Tel Fax E-mail Web
Tel +44 (0)1489 486 399 Fax +44 (0)1489 885 118
[email protected] E-mail www.lloyd-instruments.co.uk Web
+33 (0)1 30 68 89 40 +33 (0)1 30 68 89 49 general@lloyd-instruments@ ametek.fr www.lloyd-instruments.fr
+49 (0)2159 9136-0 +49 (0)2159 9136-39
[email protected] www.ametek.de
+1 (727) 536 7831 +1 (727) 539 6882
[email protected] www.lloyd-instruments.com www.chatillon.com
+65 6484 2388 +65 6481 6588
[email protected] www.lloyd-instruments.com
+86 21 6426 8111 +86 21 6426 7818 Ext.12
[email protected] www.lloyd-instruments.com
This document contains many AMETEK trademarks and registered trademarks, including, by not limited to, the AMETEK mark and logo. All other company, product and service marks, logos or images are copyrighted trademarks or service marks of their respective owners. All rights reserved. Specifications subject to change without notice.
