40 in-lbs Min without damage per IPS-TP-253°F Female. Cable Retention. 50 lbs
Min for 60% braid RG6. 70 lbs Min for Belden7915A. 100 lbs Min for RG6 Quad ...
Trompeter F Connector
Connectivity for Business Critical Continuity
High Data Rate (HDR) F Connector
Emerson Network Power Connectivity Solutions offers a network grade captured pin F-Connector plug and full socketed jack design.
■ Jacks have 360 degree machined socket constructions not the metal stamped bobby-pin design so often used in pre HD CATV networking.
■ Plugs feature a captured center contact fixed pin with 30 millionths of gold. In traditional pinless F Connectors, the wire center conductor is exposed to the outside environment which can enable oxides and other insulating films to form on the conductor surface. The HDR F connector was designed and engineered to reduce connector failure in the field, reduce network maintenance cost, and assure continuous high performance in broadband networks for applications. Samples and information can be obtained by contacting Trompeter’s customer service department at: 800.247.8256, or through the website at EmersonConnectivity.com. Part number
Description
PL130HDR-59
75 ohm F series high data rated plug, for RG59 cable
PL130HDR-11
75 ohm F series high data rated plug, for RG11 cable
PL130HDR-6
75 ohm F series high data rated plug, for RG6 cable
CBJ130HDR
75 ohm F series high data rate straight jack, pcb mounted
CBJR130HDR
75 ohm F series high data rate right angle jack, pcb mounted
CBJE130HDR-1
75 ohm F series high data rate jack to fit pcb nominal 0.062 inches thick
CBJE130HDR-2
75 ohm F series high data rate jack to fit pcb nominal 0.031 inches thick
CBJE130HDR-3
75 ohm F series high data rate jack to fit pcb nominal 0.084 inches thick
Key Features & Benefits ■ 360 degree compression technology,
not hex crimping
■ Highest network signal integrity that reduces network maintenance costs ■ High data rate design of mated pair delivers superior performance over an extended life ■ For use with typical CATV cables including RG-59, RG-6 and RG-11
Connectivity for Business Critical Continuity
High Performance F Connector Product Specification RG6/BELDEN7915A Straight Compression Plug
RG11 Straight Compression Plug
Frequency Range
Bulkhead Jack to Jack Adapter
N/A
-35dB Max from 0-3GHz
0-3 GHz
Impedance Return Loss
PC Board Edge Mount Jack
75 Ohm -30dB Max from 0-3GHz
-35dB Max from 0-1GHz, -30dB Max from 1-3GHz
Insertion Loss
0.3dB Max at 1GHz
Working Voltage
500Vrms Min at sea level
Dielectric Withstanding Voltage
1500Vrms Min at sea level
Contact Resistance
15 milliohms Max after 25 insertion/extractions for center contact 10 milliohms Max when tightened to 35 in-lbs for body contact
Insulation Resistance
5000 Megohms Min
Interface
ANSI/SCTE-01-2006 and SCTE-124
Mating Torque Cable Retention
60 in-lbs Min without damage per ANSI/SCTE-98-2004°F Male 40 in-lbs Min without damage per IPS-TP-253°F Female 50 lbs Min for 60% braid RG6 70 lbs Min for Belden7915A 100 lbs Min for RG6 Quad Shield
Durability Operation Temperature Moisture Migration Corrosion(Salt Spray)
Emerson Network Power Connectivity Solutions 299 Johnson Ave SW Ste 100 Waseca, MN 56093 US
507.833.8822 or 800.247.8256 www.EmersonConnectivity.com
60 lbs Min for RG11
N/A
N/A
500 cycles Max -55° C to +85°C No moisture intrusion inside connector per MIL-STD-202 No surface corrosion after exposed to 96 hours Min. continuous salt spray