According to DIN 8074. HDPE pipes are manufactured in black colour, with four
longitudinally coextruded lines whose colour depends on their specific purpose.
HDPE Pipes HDPE pipes are manufactured in black colour, with four longitudinally coextruded lines whose colour depends on their specific purpose. HDPE pipes are used for: transport of liquids (drinking water supply, drainage of precipitation water) transport of gas protective tubes (protection of telecommunication cables, energy supply and optical fibre cables) HDPE pipes with a maximum diameter of DN 110 are available in 100-m coils, and those with a diameter exceeding DN 110 in 6-m or 12-m rods.
Material
HDPE pipes are made of High Density Polyethylene (HDPE) and have excellent physical and chemical properties. Their handling and laying are facilitated by their low specific weight and very high flexibility. Their smooth walls prevent any sedimentation. They are absolutely waterproof, resistant to chemicals and acids, and show high impact strength (high strength and resilience).
Standard
According to norm HRN EN 12201
Quality
According to DIN 8074
Product labelling
manufacturer product name nominal – outer diameter Standard Dimension Ratio (SDR) operating pressure material product standard mark
BASIC PROPERTIES OF MATERIAL VALUE
STANDARD
MEASURING UNIT
PE 80
PE 100
Density
ISO 1183
3 kg/m
930 - 950
> 950
Melt mass flow rate MFR 190/5
ISO 1133
g/10min
0,4 - 1,3
0,2 - 0,5
Strength
ISO 527
N/mm
> 18
> 23
Elasticity module
ISO 527
N/mm
> 600
> 1000
Thermal expansion
ASTM D696
K
PROPERTY
2
2
-1
Thermal conductivity at 20°C
DIN 52 612
W/mK
Surface electrical resistance
DIN 53 482
Ω
-4
-4
(1,3 - 2) x 10
(1,3 - 2) x 10
0,4
0,4
13
> 10
13
> 10
WALL THICKNESS (s) and SPECIFIC WEIGHT (kg/m) FOR PE 80 / PE 100 – ACCORDING TO NORM DIN 8074 SDR – STANDARD DIMENSION RATIO PN – OPERATING PRESSURE (bar)
