For Part Numbers: 1-6001GD, 1-6002GD, 1-6003GD,. 1-6004GD & 1-6005GD.
Installation Instructions. Crane Cams For Harley-Davidson. ®. Twin-Cam 88. ®.
For 2006-Up
Installation Instructions
® Crane Cams For Harley-Davidson Twin-Cam 88® Using S&S® Cycle Cam Gear-Drive Kit
For Part Numbers: 1-6001GD, 1-6002GD, 1-6003GD, 1-6004GD & 1-6005GD
VERY IMPORTANT!
Before installing these cams you must refer to the Harley-Davidson® factory service manual for Twin-Cam 88®. Refer to the section covering “camshaft removal & replacement.” The procedure for retracting the sprocket chain tensioners, crankshaft sprocket bolt, and rear camshaft sprocket bolt requires special tools available from your HarleyDavidson dealer. Follow all service manual instructions carefully. Crane Gear-Drive cams are designed to work only with S & S Cycle's Twin-Cam Gear- Drive Set. It is very important that you follow the complete instructions for cam and bearing installation that comes with the S&S gear drive set. Refer to S & S Cycle Cam Gear-Drive instruction sheet No. 51-1234. Crane Cams, Inc 530 Fentress Blvd. Daytona Beach, FL 32114 11/07
WWW.CRANECAMS.COM
Tech Line: (386) 258-6174
Fax: (386) 258-6167
521F
For 2006-Up
Installation Instructions
® Crane Cams For Harley-Davidson Twin-Cam 88® Using S&S® Cycle Cam Gear-Drive Kit
For Part Numbers: 1-6001GD, 1-6002GD, 1-6003GD, 1-6004GD & 1-6005GD
VERY IMPORTANT!
Before installing these cams you must refer to the Harley-Davidson® factory service manual for Twin-Cam 88®. Refer to the section covering “camshaft removal & replacement.” The procedure for retracting the sprocket chain tensioners, crankshaft sprocket bolt, and rear camshaft sprocket bolt requires special tools available from your HarleyDavidson dealer. Follow all service manual instructions carefully. Crane Gear-Drive cams are designed to work only with S & S Cycle's Twin-Cam Gear- Drive Set. It is very important that you follow the complete instructions for cam and bearing installation that comes with the S&S gear drive set. Refer to S & S Cycle Cam Gear-Drive instruction sheet No. 51-1234. Crane Cams, Inc 530 Fentress Blvd. Daytona Beach, FL 32114 11/07
