Vodafone Mobile Broadband via the phone

Vodafone Mobile Broadband via the phone

Administrator’s guide for Corporate Installation

Make the most of now

Contents Product features

3

Requirements

3

Operating system requirements

3

Hardware requirements

3

Constraints

3

Supported devices

4

Customisation of the installation

5

Components of the Vodafone Mobile Broadband via the phone

5

General use of MSI command line parameters

5

Command line parameters for the VTP installer

7

Lock OpCo

8

Lock billing type

9

Disable the software update module

9

Adding custom connections to the VMC via the phone installer

9

Adding custom connections to the ‘User Connections.xml

9

Changing the language settings

10

Command line parameters for the VTP Full installer

11

Disable RIM® driver installation

11

Enable manual start and manual stop of VTP

11

Additional drivers

11

Configuring VMC VTP installer using a transform file

11

Creating a transform file

12

General: Create a transform file

12

Task: Applying a language transform file

13

Task: Change MSI properties

14

Task: Modify and replace a file

15

Uninstall Vodafone Mobile Broadband via the phone (Full)

17

Uninstall from Add or Remove programs

17

Command line uninstall (No UI)

17

Deployment of VTP using a Software Management System

18

Getting started

18

Applying VTP to your Software Management System

18

Deployment process

18

Product features Requirements This section describes the hardware and software requirements for the Vodafone Mobile Broadband via the phone (VTP) software. The requirements refer to Vodafone via the phone version 2.3.20 and may therefore be outdated. Please check the latest release documents of VTP for new or more information.

Constraints The following constraints are known when using VTP. Please note that these constraints refer to Vodafone VTP version 2.3.20 and may be outdated. Please check the latest Vodafone VTP release documents for new or more information. • Exclusive access to the USB port is required • Using a USB hub to connect to the mobile device may cause problems • Admin user rights are required for installation.

Operating system requirements Vodafone via the phone requires one of the following operating systems: • Windows® XP® and Service Pack 2 • Windows Vista® 32/64 Bit.

Hardware requirements The hardware requirements for Vodafone VTP are described below. • CPU: Minimum Pentium®/Celeron® 233 MHz; Recommended: Pentium 300 MHz • RAM: Minimum 128 MB; Recommended 256 MB • HDD: 20 MB free space • A supported Mobile Device (See page 4) • USB connection cable between PC and Mobile Device.

. Please note, that the operating system used may require a higher level of computer hardware. Check the release notes of your operating system for more information.

3

Supported devices The following list shows all supported devices. The list refers to VTP version 2.3.20 and may be outdated. Please check the latest VTP release documents for more or new information. IMEI

Device Embedded solutions LG Arena KM900 LG KF310 LG KP270 LG Renoir KC910 Samsung Loches S8300 Samsung Steel SGHL810V Vodafone V724 FM Vodafone V725 (firmware V107) Vodafone V735 Vodafone V736 Vodafone V810 Vodafone V830 Vodafone V830i VTP Full supported devices BlackBerry® 9000 Bold Indy BlackBerry® 9500 Storm Nokia 5300 Nokia 5610 Nokia 6020 Nokia 6120 classic Nokia 6124 Nokia 6210 Nokia 6230i Nokia 6233 (6234 in South Africa) Nokia 6234 Nokia 6280 Nokia 6288 Nokia 6300 Nokia 6630 Nokia 6680 Nokia E51 Nokia E65 Nokia N70 Nokia N72 Nokia N73 Nokia N78 Nokia N80 Nokia N81 Nokia N95

IMSI

Device Name

MSISDN

Data connection

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes

Yes Yes No Yes No

Yes** Yes** Yes** Yes** Yes**

Yes

Yes

Yes

No

Yes**

Yes

Yes

Yes

Yes

Yes**

Yes

Yes

Yes

Yes

Yes

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes

Yes** Yes** Yes** Yes Yes**

Yes

Yes

Yes

No

Yes**

Yes Yes Yes Yes Yes Yes Yes Yes Yes



No Yes Yes Yes No Yes Yes No Yes

Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes**

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes




Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** 4

Nokia N95 8GB Nokia N96 Samsung J700 Samsung L760 Samsung L770 Samsung SGH E250 Samsung SGH ZV10 Samsung SGH ZV60 Samsung U700 Samsung U900 Sony Ericsson C902 Sony Ericsson C905 Sony Ericsson K770i Sony Ericsson K800i Sony Ericsson V640i Sony Ericsson W880i Sony Ericsson W890i Sony Ericsson W910i Sony Ericsson W980i

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes



Yes Yes No No No No No No No No No No No No No No No No No

Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes** Yes Yes Yes Yes Yes Yes Yes Yes**

** The device does not present a second port that can be used for concurrent data connection and other information collection

Customisation of the installation Vodafone Mobile Broadband via the phone is available as a device embedded solution (on a limited range of devices) as well as a standalone solution known as VTP Full. This section is only relevant for customers using the Full solution. Users of an embedded version will not be able to customise the installation.

Components of the VTP Full solution Vodafone Mobile Broadband via the phone VTP (Full) consists of two MSI installers: • Vodafone Mobile Broadband VTP.msi

General use of MSI command line parameters MSI packages can be generally configured with command line parameters. This allows the settings of Vodafone VTP to be changed without making any changes to the installation package. The following code is a sample MSI command line: • Msiexec.exe /i “Vodafone Mobile Broadband via the phone.msi” LOCKED_OPCO=”23415” /norestart /qn • Msiexec.exe calls the Microsoft Windows Installer which installs the MSI-Package • /i “msi filename” is the command for installation of a MSI-Package

• Vodafone Mobile Broadband VTP.Full.msi.

• OPCO_PROP=”OPCO Code” ” determines which operator network will be installed.

The first installer contains the main application.

• /norestart suppresses a reboot if required

The second installer contains the VTP Full specific components and the RIM® BlackBerry® drivers.

• /qn sets silent installation (No User interface).

The installers must be executed in the above order. The following sections describe the command line parameters for both MSI installers.

5

This MSI command line would install the Vodafone VTP software silently (without any user interface, that means the user has no interactation with the installation procedure) with the Vodafone UK OPCO (OPCO = 23415) and without a reboot of the system after the installation. MSI command line parameters can be called directly via the Windows command line:

Or they can be executed from a batch file for multiple use:

Please note that the current file location of the MSI file must be included in the command, if it is not in the same location as the Msiexec.exe or the batch file. Msiexec.exe /i “D:\Vodafone Mobile Broadband via the phone.msi” LOCKED_OPCO=”23415” /norestart /qn.

6

Command line parameters for the Vodafone Mobile Broadband via the phone installer The following MSI command line parameters can be used to configure the MSI-package ‘Vodafone Mobile Broadband via the phone.msi’: Parameter /i /x or /uninstalll /l

Values Package|Product code Package|Product code [i|w|e|a|r|u|c|m|p|v|+|!]Logfile

/q

n|b|r|f

/norestart

---

TRANSFORMS

Transform file name

LOCKED_BILLING_TYPE

Contract PayAndGo

Description Installs or configures a product Uninstalls/Removes a product Specifies the log file path and indicates the flags to be logged i - Status messages w - Non-fatal warnings e - All error messages a - Startup of actions r - Action-specific records u - User requests c - Initial UI parameters m - Out-of-memory or fatal exit information o - Out-of-disk-space messages p - Terminal properties v - Verbose output x - Extra de-bugging information + - Append to existing log file ! - Flush each line to the log * - Log all information, except for v and x options Sets user interface level n - No UI at all - ‘silent install’ b - Basic UI - small progress bars displayed, but not interactive r - Reduced UI - standard windows displayed to report progress, but not interactive f - Full UI (default) - fully interactive Do not restart and do not show message box for restart request Applies a Transform file to the MSI package Defines the billing type Not needed when using LOCKED_CONNECTION

LOCKED_CONNECTION

INSTALL_FLEXNET

Vodafone UK Contract … More values are detailed in the FAQ section or in the file connections.xml or userconnections.xml 1 (Default) 0

Installs a connection type specified in the connections.xml or userconnections.xml

Installs or disables the Flexnet Update Software

7

Lock OpCo With the command line parameter LOCKED_OPCO the software can be locked to a specific operator. For example: LOCKED_OPCO=”23415” VTP supports the following operators:

23415 23403 23201 20601 26202 21401 22210 26801 20810 20404 27201 24006 21670 20205 53001 50503 27801 60202 65501 21910 29340 24405 23801 2380171 42602 41902 24802 24802 54201 27402 27001 22801 28001

Embedded EULA Language UK English General English General English Belgium English Germany German Spain Spanish Italy Italian Portugal Portuguese France French Netherlands Dutch Ireland English General English Hungary Hungarian Greece Greek NZ English Australia English General English Egypt English South Africa English Croatia English General English General English General English General English General English General English General English General English General English General English General English General English General English

VTP Full EULA EULA Language Language UK English General English General English Belgium French German German Spain Spanish Italy Italian Portugal Portuguese France French Netherlands Dutch Ireland English General English Hungary Hungarian Greece Greek NZ English Australia English General English Egypt English South Africa English Croatia Croatian General English General English General English General English General English General English General English General English General English General English General English General English General English

22601 45406 28401 23003 51011 24705 24602 50219 52503 41302

Romania Hong Kong Bulgaria Czech General Latvian Lithuanian Malaysia General Sri Lanka

Romania Hong Kong Bulgaria Czech General Latvian Lithuanian Malaysia General Sri Lanka

Operator

Opco

Vodafone UK Airtel-Vodafone A1 Bel Proximus Vodafone.de vodafone ES vodafone IT vodafone P SFR Vodafone NL Vodafone IE VF SE Vodafone HU Vodafone Greece Vodafone NZ Vodafone AU Vodafone Malta Vodafone EG Vodacom HR VIP Si.mobil-Vodafone FI Elisa TDC TDC SONG Norway Zain BH KT MTCNet EE Elisa Elisa Estonia Vodafone Fiji Vodafone Iceland L LUXGSM Swisscom CYTAMOBILEVODAFONE Vodafone RO SmarTone-Vodafone M – Tel Vodafone CZ IND Excelcom Bite Latvija Bite Lietuva Celcom Malaysia SGP-M1-3GSM SRI DIALOG

EULA

Romanian English Bulgarian Czech English Latvian Lithuanian English English English

Romanian English Bulgarian Czech English Latvian Lithuanian English English English 8

VODAFONE TR Vodafone India Vodafone Albania Vodafone JP

28602 Various 27602 44020

Turkey India General General

Tukish English English English

Turkey India General General

Turkish English English English

Lock billing type VTP can be locked to a specific billing type by using the parameter LOCKED_BILLING_TYPE. Example: LOCKED_BILLING_TYPE=”Contract” Valid settings are: • Contract • PayAndGo. If this setting used, the user will not be prompted to select the billing type on first run.

Disable the software update module The Flexnet software update feature is deployed by default. This can be suppressed using: INSTALL_FLEXNET=0.

Adding custom connections to the VTP installer To define a custom network connection for VTP, the connection must be added in the “userconnections.xml” file and selected by using the LOCKED_CONNECTION-Parameter. This section describes how custom connection can be added and applied.

The custom connection can be added in the XMLfile. The structure is the following: Dummy connection apn.dummy.com username pass 1.2.3.4 6.7.8.9 disabled disabled disabled disabled enabled enabled

Adding custom connections to the ‘UserConnections.xml’

manual

The file “userconnections.xml” can be found in the following path: CommonAppData\Vodafone\Via the phone.

disabled

enabled

9

The elements are described in the following list: Element

Values String

Name apn Username Password Dns1, dns2 Pap

String String String String 0.0.0.0 – 255.255.255.255 enabled disabled enabled disabled enabled disabled enabled disabled enabled disabled manual automatic (???) prompt (???) enabled disabled disabled

Spap mschap Mschap2 Mschapwinlogin Connectionbehaviour

Billshock firstTimeSetupEnabled

Description type Should always be set to 'user' opcode Operator Code opcodeName Operator Name The name of the connection The name of the APN e.g. apn.vodafone.de The username for the connection The password for the connection The DNS servers for the connection Shall Pap be enabled Shall Spap be enabled Shall Mschap be enabled Shall Mschap2 be enabled Shall Mschapwinlogin be enabled Which Connectionbehaviour shall be applied?

Shall Bill Shock be enabled Not supported by custom connections. Should always be set to 'disabled'

To use the customised connection add the “userconnections.xml” file to a MSI transform (See page 15) and select the connection using the LOCKED_CONNECTION-Parameter.

Changing the language settings The language of the installation process and the application can be chosen by applying one of the supplied language transform files. The language settings can be applied via MSI command line parameters: Example: msiexec /i “installer name” /qn TRANSFORMS=”2070.mst” This command sets the installation and client language to Portuguese. To combine the language settings with a customisation please make a copy of the desired language transform (e.g. 2070.mst) and apply all changes to the copy.

These languages are currently supported: Language (Country) Bulgarian (Bulgaria) Czech (Czech Republic) German (Germany) Greek (Greece) Spanish (Traditional) French (France) Hungarian (Hungary) Italian (Italy) Dutch (Netherlands) Romanian (Romania) Croatian (Croatia) Turkish (Turkey) English (United Kingdom) Portuguese (Portugal)

Decimal Code 1026 1029 1031 1032 1034 1036 1038 1040 1043 1048 1050 1055 2057 2070

Or you can apply the language directly to the MSI (see page 15).

10

Command line parameters for the VTP Full installer Please ensure the main “Vodafone Mobile Broadband via the phone.msi” is installed prior to installing the VTP Full installer (“Vodafone Mobile Broadband via the phone Full.msi”).

Disable RIM® driver installation Drivers for RIM® devices are installed by default. This can be suppressed using: RIM_DRIVERS=0.

Enable manual start and manual stop of VTP The default behaviour of VTP Full is to automatically launch when a supported device is inserted and to automatically shutdown when the device currently in use is removed. This can be suppressed so that VTP does not automatically launch or shutdown when the device is inserted/removed using: MANUALSTARTSTOP=1. The close ('X' icon) button on the main VTP interface will fully shutdown VTP when manual start and stop is enabled instead of the default behaviour which minimises the user interface. Due to the normal behaviour of VTP relying on an auto run mechanism to launch when a device is detected, there is no obvious method for the user to launch VTP when manual start stop mode is enabled.

Additional Drivers Please note that Vodafone Mobile Broadband VTP (Full) contains drivers for RIM devices only. Additional drivers supported by VTP (see page 4) must be installed separately. The necessary driver packages are available from the respective manufacturer’s website

Configuring VTP installer using a transform file A Windows Installer Transform is a database that contains the differences between two MSI databases. A transform can only be applied to an MSI database which is going to be installed, not to a product that is already installed on a target machine. Transforms are useful for system administrators to provide variations of a single product without having to modify the original installer. Multi-language installations are also performed by a default language contained in the MSI database and several transform files for the localised strings used by each language. In this section we will describe how a MSI transform is created, how you can replace files using a transform file and how to apply a transform file to your software installation. For the creation of the transform file we will use ORCA®, a free tool from Microsoft®. Please note that there are other tools for the creation of transform files. The ORCA tool from Microsoft can be downloaded from the following Web page: http://support.microsoft.com/kb/255905/EN-US

It is the responsibility of the administrator/Installer to create the required end user shortcuts to launch VTP. The file specified below should be the target of any shortcuts to launch VTP manually. \Vodafone\Via the phone\VodafoneLauncher.exe

11

Creating a transform file

You now see the MSI structure:

The following instructions are describing base steps to create a transform file and to perform common tasks with the ORCA software from Microsoft. All tasks can actually be put into one single transform.

General: Create a transform file This section describes the general steps to create a transform file. For any tasks see the further sections. If you would like to change the installation language, please see page 13. • Open Orca You should see the following window:

• Create a new transform From the Transform menu, select New Transform

• Open the original “Vodafone Mobile Broadband via the phone” MSI file From File menu, select Open and browse to the file “Vodafone Mobile Broadband via the phone.msi”

In the title bar you should see that the MSI file is now transformed by a Transform:

From now on, any changes to the MSI will be saved in the Transform file. The original MSI will not be changed. • Perform any task to the transform. See further sections for more information. • Save the transform Select “Generate Transform” from Transform menu.

12

Task: Applying a language transform file To set the installation language of VTP without a MSI command, you can apply the language transform file directly to the MSI transform. Please note that the language transform file must be applied before any other change. The steps are described below. • Open the original “Vodafone Mobile broadband via the phone” MSI file. From File menu, select Open and browse to the file “Vodafone Mobile Broadband via the phone.msi.” From the file menu, select Open and browse to the file ‘Vodafone Mobile Broadband via the phone.msi’ Name your transform file:

Apply the language transform file Select “Apply Transform…” in the Transform menu: Close your new transform file

• Exit Orca Now you have created a transform file for any MSI tasks. See the next sections to learn about the changes which can be applied to the MSI via a transform file

13

Choose the language transform file you would like to apply:

Task: Change MSI properties The installation process can be configured using MSI properties. page 5 describes how to configure the installation via the MSI command line parameters. The parameters can also be applied directly in an MSI transform. The result is the same as using command line parameters. To change MSI properties, please follow these steps (a transform file must already have been created, see page 12): • Select the “Property” table in the left pane:

The green bars on the left pane indicate the applied language settings:

• Choose the property you like to change:

You can now apply further changes (see other tasks) or save the transform file (See page12).

14

Apply the change:

Property LOCKED_OPCO

LOCKED_BILLING_TYPE

The green bars indicate a change in the MSI transform. You can now apply further changes (see other tasks) or save the transform file (See page 12).

Values 23415 for Vodafone UK 26202 for Vodafone DE … More values are detailed in the FAQ section or in the file connections.xml Contract PayAndGo

Description Determines the operator network to be installed Not needed when using LOCKED_CONNECTION

Defines the billing type Not needed when using LOCKED_CONNECTION

LOCKED_CONNECTION

INSTALL_FLEXNET




Task: Modify and replace a file This section describes how to modify and replace a file from Vodafone via the phone. As an example the file “UserConnections.xml” will be modified and replaced. • Browse to the file “UserConnections.xml” and make a copy for backup • Open the file “UserConnections.xml” with a text editor.

15

• Add your modifications to the XML-file (see page 9 for more information) and save the file:

In Orca please follow these steps (a transform file must already have been created, see page 12). • Check the size of the modified file

• In the left pane, select the file table.

Right-click the modified file and select Properties

The file size is shown in the General tab. Please remember the file size in the parentheses.

• Select the modified file in the right pane:

16

Uninstall Vodafone Mobile connect via the phone (Full) This section describes the two ways in which VTP (Full) can be uninstalled.

Uninstall from Add or Remove programs

• Replace the file size in the column “FileSize”:

Following the correct installation of both the “Vodafone Mobile Broadband via the phone.msi” and “ Vodafone Mobile Broadband via the phone Full.msi” there will be a single entry in Add or Remove Programs Named “Vodafone Mobile Broadband via the phone”. To uninstall VTP simply select to remove this application. This will remove both the msi's installed during the install procedure

Command line Uninstall (No UI) VTP can be uninstalled from the command line using msiexec.exe. Both the “Vodafone Mobile Broadband via the phone.msi” and “Vodafone Mobile Broadband via the phone Full.msi” must be uninstalled in the reverse order they where installed. So the VTP Full msi must be uninstalled first. You can now apply further changes (see other tasks) or save the transform file (see page 12).

The commands for uninstalling each msi are listed below. Vodafone Mobile Broadband VTP.MSI: • msiexec.exe /x {34A0FF07-F11A-4157-84A392F8AD688CBF} /qn Vodafone Mobile Broadband VTP Full.MSI: • msiexec.exe /x {E61D4E96-34D3-4B7B-BA0C337D540D22EB} /qn

17

Deployment of Vodafone Mobile Broadband via the phone using a Software Management System

Deployment process The Software Management System (SMS) deploys your software package to all designated clients. Depending on your SMS the installation will be executed on the target systems. Please note that the installation of VTP requires admin rights. After the installation is complete the software is ready for use.

This section gives a description of the general deployment process of VTP.

Getting started Before configuring the automatic deployment of VTP, please make sure you have all necessary files for the software installation. Please confirm that the software is correctly configured and all customisations have been applied. We recommend that you use a test environment to check the installation package before deployment.

Applying VTP to your Software Management System After passing all tests, the software can be applied to your Software Management System (SMS). At this point we abstract from technical details, because these strongly depend on your corporate software environment and the SMS you are using. Please refer to your SMS documentation. Generally there are two ways to deploy your software package: • As an MSI Package • As a single executable. When deploying an MSI package you can control the configuration via your Software Management System (refer to your SMS documentation). Alternatively, you can build a single executable for your software package using a third-party tool (for example Winzip® or Installshield®). In this case, the SMS is used for deployment only. All configurations are made in the executable file and cannot be controlled via the SMS. Please note, that depending on your SMS other package configurations can be possible. Refer to your SMS documentation for the best way to deploy your software package.

18

Appendix A VTP MSI command line parameter Parameter /i /x or /uninstalll /l


/q

n|b|r|f

/norestart

---

LOCKED_OPCO

23415 for Vodafone UK 26202 for Vodafone DE … More values are detailed in the FAQ section or in the file connections.xml Contract PayAndGo

LOCKED_BILLING_TYPE

Description Installs or configures a product Uninstalls/Removes a product Specifies the log file path and indicates the flags to be logged. i - Status messages w - Non-fatal warnings e - All error messages a - Startup of actions r - Action-specific records u - User requests c - Initial UI parameters m - Out-of-memory or fatal exit information o - Out-of-disk-space messages p - Terminal properties v - Verbose output x - Extra de-bugging information + - Append to existing log file ! - Flush each line to the log * - Log all information, except for v and x options Sets user interface level n - No UI at all - ‘silent install’ b - Basic UI - small progress bars displayed, but not interactive r - Reduced UI - standard windows displayed to report progress, but not interactive f - Full UI (default) - fully interactive Do not restart and do not show message box for restart request Determines the operator network to be installed. Not needed when using LOCKED_CONNECTION


LOCKED_CONNECTION

INSTALL_FLEXNET


Installs a connection type specified in the connections.xml or userconnections.xml.


19

Appendix B VTP MSI properties Property LOCKED_OPCO

LOCKED_BILLING_TYPE

Values 23415 for Vodafone UK 26202 for Vodafone DE … More values are detailed in the FAQ section or in the file connections.xml Contract PayAndGo

Description Determines the operator network to be installed. Not needed when using LOCKED_CONNECTION


LOCKED_CONNECTION

INSTALL_FLEXNET




Appendix C VTP Full MSI command line parameter Parameter /i /x or /uninstalll /l


/q

n|b|r|f

/norestart

---

RIM_DRIVERS

1 (Default) 0 1

MANUALSTARTSTOP

Description Installs or configures a product Uninstalls/Removes a product Specifies the log file path and indicates the flags to be logged. i - Status messages w – Non-fatal warnings e - All error messages a - Startup of actions r - Action-specific records u - User requests c - Initial UI parameters m - Out-of-memory or fatal exit information o - Out-of-disk-space messages p - Terminal properties v - Verbose output x - Extra de-bugging information + - Append to existing log file ! - Flush each line to the log * - Log all information, except for v and x options Sets user interface level n - No UI at all - ‘silent install’ b - Basic UI - small progress bars displayed, but not interactive r - Reduced UI - standard windows displayed to report progress, but not interactive f - Full UI (default) - fully interactive Do not restart and do not show message box for restart request. Installs or disables RIM BlackBerry® drivers Disables auto launch and close of VTP 20

© March 2009. Vodafone Limited. Vodafone and the Vodafone logos are trademarks of the Vodafone Group. Other product and company names mentioned herein may be the trademarks of their respective owners. The information contained in this publication is correct at the time of going to print. Such information may be subject to change, and services may be modified, supplemented or withdrawn by Vodafone without prior notice. All services are subject to Terms and Conditions, copies of which may be obtained upon request. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The RIM and BlackBerry families of related marks, images and symbols are the exclusive properties of and trademarks of Research In Motion – used by permission Vodafone Limited, Vodafone House, The Connection, Newbury, Berkshire RG14 2FN www.vodafone.co.uk Registered in England No. 1471587 Via_the_phone_corporate_Admin_Guide_2.4.15_EN

21